-
Graco 312781E - page 1
312781E EN Instr uctions-P ar ts Fluid Mix Manif old For proportional mixing of plural component coatings. For prof essional use only . See page 2 f or model inf ormation, including maximu m working pressure. Important Safety Instructions Read all warnings and inst r uctions in this manual. F or complete w arnings and instr uctions see y our propor ...
-
Graco 312781E - page 2
Related Manua ls 2 312781E Contents Related M anuals . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Maint ...
-
Graco 312781E - page 3
Installation 312781E 3 Installation Air Connections See F IG . 1, F IG . 2, or F IG . 3. 1. Connect 5/32 in. (4 mm) OD air tube s from the valv e solenoids to the air inlets of each valv e . 2. ProMix 2KS and ProMix 3KS systems only: Conn ect an air supply line to air pu rge v alve (APV) inlet (1/4 in. ID tube is supplied, with tag). 3. Pressurize ...
-
Graco 312781E - page 4
Installation 4 312781E F IG . 1. ProM ix 2KS and Pr oMix 3KS W all Mount Fluid Stations MA MB DV B MS SPV DV A APV TI12556a SM FI SV A SVB RV B RV A Ke y: Pr oMix 2KS Fluid Station MA Component A Meter (not included in mix manifold) D V A Component A Dose V alv e R V A Component A Sampling Va l v e SV A Component A Shutoff Va l v e MB Component B M ...
-
Graco 312781E - page 5
Installation 312781E 5 F IG . 2. ProM ix 2KE Fluid Controls, Seque ntial Dosing F IG . 3. ProM ix 2KE Fluid Contr ols, Dynamic Dosing ti15699a Key: MA Component A Meter D V A1 Component A Dose V alv e D V A2 Second Color/Catalyst V alve D V A3 Third Color/Catalyst V alv e SV A Solvent V alve A CV A Meter A Check V alve MB Component B Meter D VB Com ...
-
Graco 312781E - page 6
Installation 6 312781E Setup the Fluid Manif old f or Dynamic Dosing If you will be operating using dynamic dosing, the fluid manifold must be setup properly f or your application. Order the 15U955 Injection Kit (accessor y) . NO TE: F or ProMix 3KS, order two 15U955 Injection Kits. See y our propor tioner manu als f or setup instructions , and to ...
-
Graco 312781E - page 7
Operation 312781E 7 Operation Purging F ollow t he purging procedure in t he propor tioner system manua l. NO TES: • Pu rge before using equipmen t, which was tested with lightweight oil that could contamin ate you r mater ial. • Purge bef ore changing colors , bef ore f luid can dry in the equipm ent, at the end of the day , before stor ing, a ...
-
Graco 312781E - page 8
Maintenance 8 312781E Mix Manif old V alve Settings T o open dispense or purge v alve s, turn hex n ut (E) counterclockwise . T o close, turn clockwise . F IG . 4. Maintenance Daily • Purge the mixing system at the end of pr oduction. • Check and refill fluid su pplies for all components and solv ent. • Inspect the manif old and fl uid line c ...
-
Graco 312781E - page 9
Troubleshooting 312781E 9 T r oub leshooting Isolate a Mixing Pr oblem A mixing prob lem can be caused b y a prob lem with the controller , meters , and solenoid valv es , as well as the mix manif old. 1. T o isolate the problem, check fo r any visible f aults or errors: a. Are all air and fluid tub es, ho ses, a nd electrical cables pr operly conn ...
-
Graco 312781E - page 10
Repair 10 312781E Repair NO TE: Purge the mix manif old wit h solven t after repair to remov e any e xcess g rease that is u sed f or lubricating par ts. Remo ve the Integrator Mixer See the Pa r t s drawings on page s 14-19. Clean and inspect all par ts. Apply pipe sealant to all pipe threa ds when reassembling. Items 31, 39, and 40 are included i ...
-
Graco 312781E - page 11
Repair 312781E 11 Repair the V alves and Seats (Pr oMix 2KS and ProMix 3KS only) V alve Seat Kit 24A86 1 is av ailab le. See page 15. P ar ts included in the ki t are marked with a symbol, f or e xam- ple (16‡). F or best result s, use a ll par ts included in th e kit. See the Pa r t s drawings on pages 14 and 16. Clea n and inspect all par ts. A ...
-
Graco 312781E - page 12
Repair 12 312781E Reb uild the Mix Manifold Manif old Rebuild Kit 15U931 is a vailab le. See page 15. P arts included in the kit are marked with a symbol, for e xample (3 *). F or best results, use all par ts included in the kit. See the Pa r t s drawings on page s 14-19. Clean and inspect all par ts. Apply pipe sealant to all pipe threa ds when re ...
-
Graco 312781E - page 13
Repair 312781E 13 ...
-
Graco 312781E - page 14
Parts 14 312781E Pa r t s P art No. 289695, for Pr oMix 2KS Pr oportioner TI11578a 31 41 1 23 15‡* 14* 13* 16‡ 21 11 48 42 43 22 3 49 19 17 18* 5* 12 20 24 25 28 29 30 32 33 35 36 37 38 39* 40* 44 45* 15‡* 15‡* 15‡* 16‡ 17 20 19 31* 39* 18* 31* 46 47 Apply pipe sealant to all pi pe threads when reassembling. 1 52 53 Detail of Calibrati ...
-
Graco 312781E - page 15
Parts 312781E 15 P art No. 289695, for Pr oMix 2KS Pr oportioner * P arts included in Manifold Rebuild Kit 15 U931 (pur- chase separately). ‡ P ar ts included in V alve Seat Kit 24A861 ( purchase separate ly). (Optional Carbide Se at Kit 15U932 is av ailab le separately .) --- These par ts are not av ailab le separately . Integrator Kits (include ...
-
Graco 312781E - page 16
Parts 16 312781E P art No. 256875, for Pr oMix 3KS Pr oportioner TI14363a Apply pipe sealant to all pi pe threads when reassembling. 1 31 41 1 23 15‡* 14* 13* 16‡ 21 8 48 22 3 49 19 17 18* 5* 12 20 24 25 28 29 30 32 53 35 36 37 38 39* *40 9 45* 15‡* 15‡* 16‡ 17 20 19 31* 39* 18* 31* 46 47 5* 45* 10 52 Detail of Calibration Ki t (53), show ...
-
Graco 312781E - page 17
Parts 312781E 17 P art No. 256875, for Pr oMix 3KS Pr oportioner * P arts included in Manifold Rebuild Kit 15 U931 (pur- chase separately). ‡ P ar ts included in V alve Seat Kit 24A861 ( purchase separate ly). (Optional Carbide Se at Kit 15U932 is av ailab le separately .) --- These par ts are not av ailab le separately . Integrator Kits (include ...
-
Graco 312781E - page 18
Parts 18 312781E P art No. 262398, for Pr oMix 2KE Pr oportioner , Sequential Dosing * P ar ts included in Manif old Reb uild Kit 15U931 (pur- chase separately). Integrator Kits 1 3 5* 21 23 24 25 28 29 30 31* 35 36 37 39* 40* 31* 45 46 47 48 49 ti16301a *31 39* 38 Ref. P art Description Qty . 1 --- -- BOD Y , inte grator manif old 1 3 15T59 2 PLUG ...
-
Graco 312781E - page 19
Parts 312781E 19 P art No. 262399, for Pr oMix 2KE Pr oportioner , Dynamic Dosing * P arts included in Manifold Rebuild Kit 15 U931 (pur- chase separately). Restrict or Kit ti16327a 1 3 31* 35 40* 55 45 *5 31* 54 36 23 37 39* 38 *39 24 28 29 30 59 57 58 56 25 Ref. P art Description Qty . 1 --- -- BOD Y , inte grat or manif old 1 3 15T59 2 PLUG, int ...
-
Graco 312781E - page 20
Parts 20 312781E ...
-
Graco 312781E - page 21
Technical Data 312781E 21 Te c h n i c a l D a t a Maximum Fluid Working Pres sure . . . . . . . . . . . . . . . . . . 289 695, 256875, and 262398: 4000 psi (28 MP a, 280 bar) 262399: 4500 psi (31 MP a, 310 bar) Dispense V alv e Fluid Inlet Size . . . . . . . . . . . . . . . . . . . . 1/4 npt(f) Dispense V alv e Air Inlet Fitting Size . . . . . . . ...
-
Graco 312781E - page 22
All written and visual data contained in this document reflects the latest product information available at the time of publica tion. Graco reserves the right to make changes a t any time without notice. Original instructions. Thi s manual contains Eng lish. MM 312781 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Kor ...
Haben Sie eine Frage bezüglich Graco 312781E?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Graco 312781E nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Graco 312781E hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.