-
Pioneer DC500 - page 1
EN-1 FCC ST A TEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to com ...
-
Pioneer DC500 - page 2
EN-2 READ THIS FIRST T rademar k Infor ma tion Microsof t and Window s are U.S. registered trademarks of Microsoft Corporation. Pentiu m is a registered trademark of Intel Corporation. Macintosh is a trademark of Apple Computer , Inc. SD TM is a trademark. Photo Explorer and Photo Express are trademarks. Other names and products may be trademarks o ...
-
Pioneer DC500 - page 3
EN-3 SAFETY INSTRUCTIONS Read and understand all Warnings and Cautions before using this product. War nings If foreign objects or water have entered the camera, turn the power OFF and remove the batteries and the AC power adapter . Continued use in this state might cause fire or electric shock. Consult the store of purchase. If the camera has falle ...
-
Pioneer DC500 - page 4
EN-4 Cautions Insert the batteries paying careful attention to the polarity (+ or - ) of the terminals. Inserting the batteries with its polarities inverted might cause fire and injury , or damage to the surrounding areas due to the battery rupturing or leaking. Do not fire the flash close to anyone ' s eyes. This might cause damage to the per ...
-
Pioneer DC500 - page 5
EN-5 Impor tant Notes on Using Waterproof Housing Before using the waterproof housing, carefully read and strictly observe the detailed instructions described in the manual. Not following the instructions for usage and maintenance will void your product warranty . Notes on Batter y Usage When you use the battery , carefully read and strictly observ ...
-
Pioneer DC500 - page 6
EN-6 CONTENTS INTRODUCTION...................................................8 Package Contents........................................9 Warranty Statement.....................................10 GETTING TO KNOW YOUR CAMERA............1 1 Front View ...................................................12 Rear View ..................................... ...
-
Pioneer DC500 - page 7
Playing Back I mages/V ideo Clips on TV ........52 Rotating Images in the Display ....................53 Deleting Images/Video Clips.......................54 Protecting Images/Video Clips....................55 Setting the DPOF .........................................56 Connecting to a PictBridge Compliant Printer ....60 Changing the Camera Startup ...
-
Pioneer DC500 - page 8
EN-8 INTRODUCTION Let the Land & Sea adventures begin with your new SeaLife DC500 digital camera. Equipped with the latest digital technology means the camera is automatic and easy to use. Here are some of the unique features that you will surely enjoy . Land & Sea Exposure modes- special underwater modes for bright colorful underwater pict ...
-
Pioneer DC500 - page 9
EN-9 Pac kage Contents Carefully unpack the contents to ensure that you have the following items. In the event that any item is missing or if you find any mismatch or damage, promptly contact your dealer . Common Product Components: Digital Still Camera Underwater Housing Instructions Manual USB Cable Software CD-ROM A V Cable AC Power Adapter Comm ...
-
Pioneer DC500 - page 10
EN-10 Limited W ar ranty This product will be replaced or repaired free of charge within 1 year from the purchase date in the case of a manufacturing defect, if the complete defective product is sent freight prepaid at the at the sender ’ s risk to: Pioneer Research, 97 Foster Road, Suite 5, Moorestown, NJ 08057 or to the importer in a different ...
-
Pioneer DC500 - page 11
EN-11 GETTING T O KNOW Y OUR CAMERA AND HOUSING F ront V iew 1 2 3 6 7 4 5 8 9 1. Self-timer LED 2. Shutter button 3. Power button 4. Strap eyelet 5. Battery/SD memory card cover 6. Lens 7. Auto-Focus auxiliary LED 8. Flash 9. Microphone ...
-
Pioneer DC500 - page 12
EN-12 3 2 1 8 7 11 10 6 5 4 9 12 R ear View 1. LED indicator 2. W / Zoom out (Wide-angle) button Thumbnail button 3. T / Zoom in (T elephoto)button 4. Menu button 5. MODE button 6. Control buttons 7. Delete button 8. Display (LCD on/off) button 9. T ripod socket 10. Docking station terminal (DC IN 5V port/USB port) 1 1. LCD monitor 12. Speaker 13. ...
-
Pioneer DC500 - page 13
EN-13 Control Buttons 1 2 3 4 5 1. ( ❑ ) Flash button 2. ( ▼ ) Quick View button 3. SCN ( ▼ ) Scene Mode button 4. ( ◆ ) Self-T imer button 5. OK button (enables QuickShoot) T op View of Docking Cradle 1. Cradle 2. USB port 3. A V-OUT port 4. DC IN 5V port 5. Cradle plug 1 2 3 4 5 Inner Camera W aterproof Housing ...
-
Pioneer DC500 - page 14
EN-14 LCD Monitor Inf or mation Camera Mode 7. Scene mode [ ] Auto Mode [ ] Backlight Mode [ ] Landscape Mode [ ] Macro Mode [ ] Night Scene Mode [ ] Portrait Mode [ ] Sports Mode [ ] Sea Mode [ ] Ext Flash Mode 8. Flash mode [ ] Red eye [ ] No flash [ ] Auto flash [ ] Forced flash 1. Camera mode 2. Image quality [ ] Super Fine [ ] Fine [ ] Normal ...
-
Pioneer DC500 - page 15
EN-15 Mo vie Mode 1. Movie mode 2. Recordable movie time available 3. Resolution for video clips 4. SD memory card indicator (if present) 5. Battery power indicator 6. T ime 7. Date 8. Zoom state 1 2 4 5 8 T W 6 7 VGA 3 Audio Mode 1. Audio mode 2. Current file/ total number of audio files 3. SD memory card indicator (if present) 4. Battery power in ...
-
Pioneer DC500 - page 16
EN-16 Image Playback 1. Play mode 2. Playback frame number 3. SD memory card indicator (if present) 4. Battery power indicator 5. Image size 6. Camera mode Video Playback 1. Play mode 2. T otal of recorded time 3. Resolution for video clips 4. SD memory card indicator (if present) 5. Battery power indicator 6. Playback indicator 7. Movie mode Audio ...
-
Pioneer DC500 - page 17
EN-17 LED Indicators Indicator State Description/Activity LED indicator Solid red 1.The digital still camera is powering up. 2.The digital still camera is in the process of battery charge. LED indicator Blinking red Processing image after capture. LED indicator Solid green USB communication is in progress. Solid green Camera in sleep mode. Blinking ...
-
Pioneer DC500 - page 18
EN-18 PREP ARING THE CAMERA Installing the Batter y Make sure that the power of the digital still camera is off before inserting or removing the battery . 1. Slide the battery cover in the direction of the [OPEN] arrow . 2. Insert the battery in the correct orientation as shown in the illustration. 3. Close the battery cover . T o remove the batter ...
-
Pioneer DC500 - page 19
EN-19 1 2 3 Docking Cradle With the docking cradle, you can position your digital still camera and connect it to other media devices to play back your images, video clips, or voice recording files (output to a TV monitor or another recorder recording device, for example) on your desktop. The cradle will facilitate the battery charge of the camera i ...
-
Pioneer DC500 - page 20
EN-20 Charging the Batter y The state-of-charge of the battery will affect the performance of the digital still camera. T o maximize battery performance and lifetime, it is recommended that you fully charge the battery using the optional AC power adapter and then fully discharge it (through normal use) at least one time. Please note that the digita ...
-
Pioneer DC500 - page 21
EN-21 Using the AC P ower Adapter 1. Make sure the camera is turned off. 2. Connect one end of the AC power adapter to the jack on the cradle labeled “DC IN 5V .” 3. Connect the other end to an electrical outlet. Use the appropriate international plug adapter (included) depending on the type of electrical outlet in your country . Make sure to u ...
-
Pioneer DC500 - page 22
EN-22 Inser ting and Remo ving an SD Memor y Car d (Optional Accessor y) The digital still camera comes with 10MB of internal memory , allowing you to store video clips, captured images, or voice recording files in the digital still camera. However , you can also expand the memory capacity by using an optional SD (Secure Digital) memory card so tha ...
-
Pioneer DC500 - page 23
EN-23 GETTING ST AR TED T ur ning the P ower On/Off Press the button until the digital still camera turns on. T o turn the power off, press and hold the button again. Entering the Main Menu After turning on the digital still camera, the Main Menu screen appears. Follow the steps below to select the desired mode: 1. Press the button to turn on the p ...
-
Pioneer DC500 - page 24
EN-24 Setting the Date and Time The date/time setting screen will automatically appear: When first turning the camera on. When turning the power on after leaving the camera without battery for an extended period of time. 1. Press the button to turn on the camera. 2. Press the MODE button and select in [ (SETUP)] mode with t , u , ▼ or ▲ , then ...
-
Pioneer DC500 - page 25
EN-25 LANGUAGE BACK : SET : 2 / 8 Choosing the Screen Langua ge Follow the steps below to specify in which language menus and messages are to be displayed on the LCD monitor from the following: , ENGLISH, , , , DEUTSCH, I T ALIANO and 1. Press the button to turn on the camera. 2. Press the MODE button to access in [ (SETUP)] mode with t , u , ▼ o ...
-
Pioneer DC500 - page 26
EN-26 F or matting an SD Memor y Car d or Inter nal Memor y The term " Formatting " means preparing an " SD Memory Card " to record images; this process is also called " initialization " . This utility formats the internal memory (or memory card) and erases all stored images and data. 1. Press the button to turn on the ...
-
Pioneer DC500 - page 27
EN-27 Setting Image Resolution and Quality As you get to know the digital still camera, you can set the image resolution (number of vertical and horizontal pixels) and image quality (compression ratio) based on the types of images you want to shoot. These settings affect the number of images that can be stored in memory , or on a memory card. Highe ...
-
Pioneer DC500 - page 28
EN-28 Using the LCD Monitor Y our camera is equipped with a 2.0" full color TFT LCD monitor to help you compose images, replay recorded images/video clips or adjust menu settings. The mode icons, text and numbers displayed on the monitor may vary according to the current settings. 1. Press the button to turn on the camera. 2. Compose your scen ...
-
Pioneer DC500 - page 29
EN-29 CAMERA MODE Shooting Images 1. Press the button to turn on the power . 2. Press the MODE button to access in [ (CAMERA) ] mode with ▲ , ▼ , t , or u , then press the OK button. 3. Compose the image on the monitor screen so that the main subject is within the focus frame. 4. Press the shutter button down half way to focus the image. When y ...
-
Pioneer DC500 - page 30
EN-30 Useful Scene Modes Land & Sea Exposure Pr ogr ams Y our digital still camera offers you nine types of scene modes to capture images easily in a situation that is programmed to handle all adjustments for you by selecting the following shooting conditions. ...
-
Pioneer DC500 - page 31
EN-31 Note for the following functions according to the desired scene from a menu T o use the SCENE mode, follow the steps below: 1. Press the button to turn on the camera. 2. Press / SCN to access in [SCENE] mode. 3. Use t or u to select the desired scene mode, then press the or to exit from the scene mode. OK button to confirm. 4. Compose the ...
-
Pioneer DC500 - page 32
EN-32 R eviewing the Last Image The camera is equipped with the button, allowing the most recent image to be displayed on the LCD monitor in the / mode. Use the following procedure to preview the last image captured. 1. Press to display the last image captured. The last image displays on the LCD monitor . Press again to return to the normal shootin ...
-
Pioneer DC500 - page 33
EN-33 Using the Zoom Function This camera is equipped with 3x optical zoom. The lens moves during the optical zoom photography , allowing you to capture telephoto and wide-angle shots. By using the optical zoom function; images appear closer by pressing the T button, or smaller away by pressing the W button. Y ou can further enlarge the subjects wi ...
-
Pioneer DC500 - page 34
EN-34 Using the Macro (Close-Up) Mode on Land With this mode, the cameraís lens switches the auto focus system to focus on subjects that are much closer to the lens. This feature allows you to shoot close-up objects on land, such as small insects or flowers to get the smallest detail. 1. Press the button to turn on the camera. 2. Press ▼ / SCN t ...
-
Pioneer DC500 - page 35
EN-35 Using the Sea or Ext. Flash Modes These two scene modes are special exposure programs developed for taking pictures underwater . Sea Mode - Select this mode to take underwater photos without external flash accessory (optional). This exposure program was developed by scuba divers and will produce the best quality underwater images when NOT usi ...
-
Pioneer DC500 - page 36
EN-36 The camera has four flash modes: Red Eye, No Flash(default), Auto Flash and Forced Flash. The table below will help you to choose the appropriate flash mode: Flash mode Description Use this mode to reduce the red-eye phenomenon when you want to take natural- looking photographs of people and animals in low-light conditions. When taking photog ...
-
Pioneer DC500 - page 37
EN-37 Using the Flash in Exter nal F lash Mode When the camera is set to Ext Flash mode the camera’s flash will always fire. This will trigger the SeaLife External Flash (SL960) or Digital Flash (SL960D) to fire. In order to achieve proper image exposure, it may be necessary to select from one of the following three flash modes: NORMAL FLASH - Th ...
-
Pioneer DC500 - page 38
EN-38 Using the Self-Timer The self-timer can be set in [ (CAMERA)] mode. This feature is used in situations such as group shots. 1. Secure the camera to a tripod or place it on a stable surface. 2. Press the button to turn on the power . 3. T oggle u / to select the desired self-timer mode. 4. Compose your scene and press the shutter button. The s ...
-
Pioneer DC500 - page 39
EN-39 Adjusting the Exposure Y ou can manually adjust the exposure determined by the digital still camera. Use this mode when the proper exposure cannot be obtained, for example, when the contrast (different between light and dark) between the subject and the background is extremely large. The EV compensation value can be set in the range from - 2. ...
-
Pioneer DC500 - page 40
EN-40 Setting W hite Balance This feature lets you make adjustments to compensate for different lighting types according to your shooting conditions. 1. Press the MODE button to access in [ (CAMERA)] mode with ▲ , ▼ , t , or u , then press the OK button. 2. Press , then toggle u to select the [AE/ A WB] menu. 3 . Use ▼ to select [WHITE BALANC ...
-
Pioneer DC500 - page 41
EN-41 AD V ANCED SHOOTING QuickShoot Mode [ ] This feature will greatly reduce the camera’s shutter lag time. Shutter lag is the time difference between pushing the shutter button and capturing the image. All cameras have some shutter lag the camera needs time to set autofocus and evaluate lighting conditions. Without QuickShoot, the camera will ...
-
Pioneer DC500 - page 42
EN-42 Continuous Shooting This mode is used for continuous shooting. Pictures are taken continuously while the shutter release button is pressed. 1. Press the MODE button to access in [ (CAMERA)] mode with ▲ , ▼ , t , or u , then press the OK button. 2. Press , then use u to select the [FUNCTION] menu. 3. Use ▼ to select [CAPTURE MODE], then ...
-
Pioneer DC500 - page 43
EN-43 Auto Exposure Brack eting (AEB) In this mode, the camera automatically changes the exposure within a set range to take three shots after you press the shutter button once. AEB settings can be combined with exposure compensation settings to extend the adjustment range. 1. Press the MODE button to access in [ (CAMERA)] mode with ▲ , ▼ , t , ...
-
Pioneer DC500 - page 44
EN-44 Adjust W hite Balance Manually Manual white balance lets you configure the digital still camera for a particular light source and other conditions. Note that you must perform manual white balance under the same conditions you will be shooting under . Y ou must also have a white piece of paper or other similar object on hand in order to perfor ...
-
Pioneer DC500 - page 45
EN-45 Instant Delete and Quickview Mode When Quickview is turned on, the camera will display the actual picture taken after each shot. Y ou also have the option to instantly delete the last picture taken if you press the shutter button while “DELETE?” message is displayed. 1. Press the MODE button and select [ ] camera mode, then press OK butto ...
-
Pioneer DC500 - page 46
EN-46 PLA Y MODE - THE BASICS In the [ (PLA Y) ] mode, you can view, magnify , delete images or play video clips back. This mode also provides thumbnail images display and slide show , allowing you to quickly search for the desired image. Viewing Ima ges 1. Press the button to turn on the power . 2. Press the MODE button to access in [ (PL A Y)] mo ...
-
Pioneer DC500 - page 47
EN-47 Magnifying Ima ges While reviewing your images, you may enlarge a selected portion of an image. This magnification allows you to view the details. The zoom factor is displayed on the screen, showing the current magnification ratio. Images that are being playback can be enlarged in 14 levels of 8 times enlargement. 1. Press the MODE button to ...
-
Pioneer DC500 - page 48
EN-48 T humbnail Display (Inde x Playbac k) This function allows you to view four or nine thumbnail images on the LCD monitor simultaneously so you may search for a particular image. 1. Press the MODE button to access in [ (PL A Y)] mode with ▲ , ▼ , t , or u , then press the OK button. 2. In the [ (PLA Y)] mode, press to select [THUMBNAIL] wit ...
-
Pioneer DC500 - page 49
EN-49 Slideshow Display The slide show function enables you to play your images back automatically in sequential order . This is very useful and entertaining feature for reviewing recorded images and for presentations. 1. Press the MODE button to access in [ (PL A Y)] mode with ▲ , ▼ , t or u , then press the OK button. 2. In the [ (PLA Y)] mod ...
-
Pioneer DC500 - page 50
EN-50 MO VIE MODE R ecor ding Video Clips 1. Press the button to turn on the power . 2. Press the MODE button to access in [ (MOVIE)] mode with ▲ , ▼ , t , or u , then press the OK button. 3. Press the shutter button to start recording. 4. Press the shutter button again to stop recording. The function of optical zoom (3x) can be activated befor ...
-
Pioneer DC500 - page 51
EN-51 Playing Back Video Clips 1. Press the MODE button to access in [ (PL A Y)] mode with ▲ , ▼ , t , or u , then press the OK button. 2. In the [ (PL A Y)] mode, use t or u to go through the images until the video clip you want to play back is displayed. T o view the previous image, press the t button. T o view the next image, press the u but ...
-
Pioneer DC500 - page 52
EN-52 PLA Y MODE - AD V ANCED FUNCTIONS Playing Back Images/Video Clips on TV Y ou can also playback your images on a TV screen. Before connecting to any device, make sure to select NTSC/P AL system to match the video output system of the video equipment you are going to connect to the digital still camera, then turn all connected devices off. 1. P ...
-
Pioneer DC500 - page 53
EN-53 R otating Images in the Display This function lets you rotate images so that the images are played back with the correct orientation. Y ou can rotate an image 90 degree clockwise or counterclockwise. 1. Press the MODE button to access in [ (PL A Y)] mode with ▲ , ▼ , t , or u , then press the OK button. 2. In the [ (PL A Y)] mode, use t o ...
-
Pioneer DC500 - page 54
EN-54 Deleting Images/V ideo Clips Use this function to delete one or all images/video clips stored in the internal memory or memory card. Please note that the deleted images or video clips cannot be recovered. Exercise caution before deleting a file. T o delete a single image/video clip 1. Press the MODE button to access in [ (PL A Y)] mode with ? ...
-
Pioneer DC500 - page 55
EN-55 Protecting Ima ges/Video Clips Set the data to read-only to prevent images from being erased by mistake. 1. Press the MODE button to access in [ (PL A Y)] mode with ▲ , ▼ , t , or u , then press the OK button. 2. In the [ (PLA Y)] mode, press to select [PROTECT] with the ▲ , ▼ , t , or u button, then press the OK button. 3 . Use ▲ o ...
-
Pioneer DC500 - page 56
EN-56 Setting the DPOF DPOF (Digital Print Order Format) allows you to embed printing information on your memory card. By using DPOF , you can select an image to be printed and then specify how many prints or which image you would like. T ake your memory card to a DPOF enabled printer that accepts memory cards. The DPOF/card- compatible printer wil ...
-
Pioneer DC500 - page 57
EN-57 X01 DPOF BACK : SET : QUANTITY DA TE ENABLE CANCEL SET DPOF BACK : SET : QUANTITY DA TE ENABLE DISABLE ENABLE DPOF BACK : SET : QUANTITY DA TE ENABLE 02 Use ▲ or ▼ to select [QUANTITY], [D A TE] and [ENABLE],then press the OK button to configure the settings. [QUANTITY]: Allows you to select image quantity (0~99). Use ▲ or ▼ to set th ...
-
Pioneer DC500 - page 58
EN-58 T o configure print settings for all images. Press the MODE button to access in [ (PLA Y)] mode, then press the OK button. In the [ (PLA Y)] mode, press to select [DPOF] with ▲ , ▼ , t , or u , then press the OK button. Use t or u to select the desired image you want to mark . Use ▲ or ▼ to select [ALL IMAGES], then press the OK butto ...
-
Pioneer DC500 - page 59
EN-59 Before you perform the DPOF settings on your camera, always remember to copy your images from the internal memory to an SD memory card first. The [ ] print icon will appear on the monitor indicating images selected for printing. Y ou cannot print movies. DPOF BACK : SET : QUANTITY DA TE ENABLE CANCEL SET DPOF BACK : SET : QUANTITY DA TE ENABL ...
-
Pioneer DC500 - page 60
EN-60 Connecting to a PictBridge Compliant Printer Even if you do not have a computer , you can connect the camera directly to a printer that supports PictBridge to perform image selection and printing using the camera monitor screen and controls. DPOF support also lets you specify which images you want to print and how many copies of each should b ...
-
Pioneer DC500 - page 61
EN-61 Step Figure SELECT P AGE : PRINT : CANCEL : MORE : PRINT INFO SELECT ITEM: ENTRY: FILE NAME DATE EXIT QUANTITY 3 4 5 6 Procedure Use t or u to select the image you want to print, then press ▼ to set MORE print reservations. * The [PRINT INFO] screen is displayed. Use ▲ or ▼ to select the desired item, then press the OK button. * Use ▲ ...
-
Pioneer DC500 - page 62
EN-62 TRANSFERRING PRINT SELECT ITEM : ENTRY: CONTINUE CANCEL This starts printing and displays the message " TRANSFERRING " on the monitor screen.The message will disappear after the printing finished. * T o cancel printing: Pressing the OK button during print data transfer displays the screen for selecting whether to [CONTINUE] or [CANC ...
-
Pioneer DC500 - page 63
EN-63 PRINT SELECT ITEM : ENTRY: CONTINUE CANCEL TRANSFERRING 4 PRINT P APER GO: SIZE BORDERLESS STANDARD ST ANDARD EXIT : SELECT : 2 3 PRINT SELECT ITEM : ENTRY: PRINT CANCEL Use u to access in the selection of paper setting, then press the OK button to print. [SIZE]: Y ou may select the desired item depending on the type of printer being used. [B ...
-
Pioneer DC500 - page 64
EN-64 Changing the Camera Star tup Logo This feature lets you specify one of your recorded images as your setup screen image, which will be displayed on the monitor whenever you press the button to turn on the camera. 1. Press the MODE button to access in [ (PL A Y)] mode with ▲ , ▼ , t , or u , then press the OK button. 2. In the [ (PLA Y)] mo ...
-
Pioneer DC500 - page 65
EN-65 A UDIO MODE The digital still camera enables you to record and playback voice files anytime and anywhere. R ecor ding V oice Files 1. Press the button to turn on the camera. 2. Press the MODE button to access in [ (AUDIO)] mode with ▲ , ▼ , t , or u , then press the OK button. 3. In the [ (AUDIO)] mode, use the shutter button to start voi ...
-
Pioneer DC500 - page 66
EN-66 Button operations Deleting a V oice Recording File 1. Press the MODE button to access in [ (AUDIO)] mode with ▲ , ▼ , t , or u , then press the OK button. 2. In the [ (AUDIO)] mode, use ▲ or ▼ to select the voice file you want to delete. 3. Press to delete the selected voice file. 4. When the delete message appears, use t or u to sele ...
-
Pioneer DC500 - page 67
EN-67 TRANSFERRING FILES FROM Y OUR DIGIT AL STILL CAMERA T O COMPUTER After using USB cable to establish a USB connection between the camera and your computer , you can use your computer to share recorded images/video clips/voice-recording files with your family or friends via a e- mail or post them on the Web. In order to do this, you must instal ...
-
Pioneer DC500 - page 68
EN-68 Step 1: Install the USB driv er Installation on Windows 98 & 98SE The USB driver on the supplied CD-ROM is exclusively for Windows 98 and 98SE. Windows 2000/ME/XP users need not install the USB driver . 1. Insert the enclosed CD-ROM into your CD-ROM drive. 2. When the welcome screen appears, click " Install USB/PC-Cam driver " . ...
-
Pioneer DC500 - page 69
EN-69 Step 2: Connect the digital still camera to your computer 1. Position the camera on the cradle. 2. Connect one end of the USB cable to the USB connector on the cradle. 3. Connect the other end of the USB cable to an available USB port on your computer . 4. T urn the camera on. [USB Mode] screen is displayed. 5. Use ▲ or ▼ to select [PC], ...
-
Pioneer DC500 - page 70
EN-70 Step 3: Download images, video c lips or voice-recording files When the digital still camera is turned on and connected to your computer , it is considered to be a disk drive, just like a floppy disk or CD. Y ou can download (transfer) images by copying them from the " Removable disk " ( " untitled " or " unlabeled &q ...
-
Pioneer DC500 - page 71
EN-71 EDITING SOFTWARE INST ALLA TION Installing Photo Explorer Ulead Photo Explorer provides a simple and e f ficient way to transfe r , browse, modify and distribute digital media. Acquire photos, video or sound clips from various digital device types and easily browse or add personal descriptions; make timely modifications; or distribute the med ...
-
Pioneer DC500 - page 72
EN-72 Installing Photo Express Ulea d Photo Express is complete photo project software for digital images. The step-by-step workflo w , visual program interface, and in-program help assist users in creating exciting photo projects. Acquire digital photos effortlessly from digital cameras or scanners. Organize them conveniently with the Visual Brows ...
-
Pioneer DC500 - page 73
EN-73 USING THE DIGIT AL STILL CAMERA AS A PC CAMERA Y our digital still camera can act as a PC camera, which allows you to videoconference with business associates, or have a real-time conversation with friends or family . T o use the digital still camera for videoconferencing, your computer system must include the items as below: Microphone Sound ...
-
Pioneer DC500 - page 74
EN-74 Step 2: Connect the digital still camera to your computer . 1. Position the camera on the cradle. 2. Connect one end of the USB cable to the USB port on the cradle. 3. Connect the other end of the USB cable to an available USB port on your computer . 4. Turn on the power . [USB Mode] screen is displayed. 5. Use ▲ or ▼ to select [PC CAM], ...
-
Pioneer DC500 - page 75
EN-75 MENU OPTIONS Camera Menu 1. Press the MODE button to access in [ (CAMERA)] mode with ▲ , ▼ , t , or u , then press the OK button. 2. Press to access in [CAMERA] menu, then use t or u to select [PICTURE] / [FUNCTION] / [AE / A WB] menu. 3 . Use ▲ , ▼ , t , or u to select the desired option item in [PICTURE] / [FUNCTION] / [AE / A WB] m ...
-
Pioneer DC500 - page 76
EN-76 PICTURE Settings Option Functional Description SIZE Sets the size of the image that will be captured. * 5M 2560 x 1920 * 3M 2048 x 1536 * M 1.2 1280 x 960 * M 0.3 640 x 480 * TIFF IMAGE QUALITY Sets the quality (compression rate) at which the image is captured. * SUPER FINE * FINE * NORMAL SHARPNESS Sets the level of image sharpness. * HIGH * ...
-
Pioneer DC500 - page 77
EN-77 FUNCTION Settings Item Functional Description CAPTURE MODE Sets the recording method at the time of taking pictures. * S SINGLE * CONTINUOUS * A AEB LCD BRIGHT Sets whether or not to use digital zoom at the time of photography . The adjustment range is from - 5 to +5. DIGIT AL ZOOM Sets whether or not to use digital zoom at the time of photog ...
-
Pioneer DC500 - page 78
EN-78 AE/A WB Settings Item Functional Description WHITE BALANCE Sets the white balance photographing under a variety of lighting conditions and permits photographs to be taken that approach the conditions that are seen by the human eye. * AUTO AUT O * DA YLIGHT * CLOUDY * SUNSET * TUNGSTEN * FLUORESCENT ISO Sets the sensitivity for taking pictures ...
-
Pioneer DC500 - page 79
EN-79 Mo vie Menu This menu is for the basic settings to be used when recording video clips. 1. Press the MODE button to access in [ (MOVIE)] mode with ▲ , ▼ , t , or u , then press the OK button. 2. Press to access in [MOVIE] menu. 3 . Use ▲ , ▼ , t , or u to select the desired setting, then press the OK button. 4. T o exit from the menu, ...
-
Pioneer DC500 - page 80
EN-80 Play Menu 1. Press the MODE button to access in [ (PL A Y)] mode with ▲ , ▼ , t or u , then press the OK button. 2. Press to access in [PLA Y] menu. 3 . Use ▲ , ▼ , t or u to select the desired setting, then press the OK button. 4. T o exit from the playback menu, press the button. Item Functional Description SLIDE SHOW Y ou can play ...
-
Pioneer DC500 - page 81
EN-81 Item Functional Description COPY T O CARD Allows you to copy your files from the digital still cameraís internal memory to a memory card. Of course, you can only do this if you have a memory card installed and some files in internal memory . * YES/NO THUMBNAIL Allows you to view 4 or 9 thumbnail images on the LCD monitor at the same time, wh ...
-
Pioneer DC500 - page 82
EN-82 Setup Menu 1. Press the MODE button to access in [ (SETUP)] mode with ▲ , ▼ , t , or u , then press the OK button. The [SETUP] menu is displayed. 2 . Press t or u to select the [BASIC] / [CUS T OM] menu. 3 . Use ▲ , ▼ , t , or u to select the desired option item, then press the OK button. 4. Press the MODE button to return to Main Men ...
-
Pioneer DC500 - page 83
EN-83 BASIC Settings Item Functional Description SPEAKER Sets whether or not to mute the startup sound, and the camera sound each time you press the camera button. * ON/OFF FORMA T Erases all images and reformats the SD card loaded in your camera. Protected images are also erased. SD card cannot be formatted if it is write-protected. Refer to secti ...
-
Pioneer DC500 - page 84
EN-84 CUSTOM Settings Item Functional Description DA TE TYPE Sets the displayed type of date and time on the screen. * [Y/M/D]: Y ear/Month/Day * [D/M/Y]: Day/Month/Y ear * [M/D/Y]: Month/Day/Y ear DA TE SETUP Sets the date and the time. Refer to section in this manual titled " Setting the Date and T ime " for further details. LANGUAGE Se ...
-
Pioneer DC500 - page 85
EN-85 CONNECTING Y OUR CAMERA T O OTHER DEVICES ...
-
Pioneer DC500 - page 86
EN-86 SPECIFICA TIONS Item Description Image Sensor CCD Effective pixels 5.0 Mega pixels Image size Still image: 2560 x 1920, 2048 x 1536, 1280 x 960, 640 x 480 Video clip: 640 x 480, 320 x 240 Image quality Still image: Super fine, Fine, Normal Recording media 10MB internal memory SD memory card (optional, up to 1G B) Compression format MPEG 4 SP ...
-
Pioneer DC500 - page 87
EN-87 APPENDIX T roubleshooting Guide Symptom Possible causes Solutions / Corrective Actions Power does not turn on Camera suddenly powers down. Image is not captured when the shutter button is pressed. Continuous shooting is not possible. Cannot use the flash to capture images. Cannot transfer files over a USB connection. * Load new or fully charg ...
-
Pioneer DC500 - page 88
EN-88 Possible Number of Recordable Images The frame counter indicates the approximate number of images that can be stored on the SD memory card. The number of recordable images may vary depending on the recorded subject, the capacity of the memory card, there are files other than images or when the recording is made while switching the picture qua ...
-
Pioneer DC500 - page 89
EN-89 Approximate Duration of Recording Time The table below indicates the approximate duration of recording time depending on the capacity of the SD memory card. Imag e size SD memory card 8MB 16MB 32MB 64MB 128MB 256MB 512MB 640 x 480 0:18 0:47 1:46 3:42 7:36 15:14 30:48 320 x 240 1:13 3:08 6:58 14:38 29:58 1:00:05 2:01:25 The values for the reco ...
-
Pioneer DC500 - page 90
EN-90 Underwa ter Housing Instr uctions Important: Please carefully read and understand these instructions before using camera and housing underwater . SeaLife DC500 Underwater Housing: Depth rated and tested to 200 ft. (60m) Fully rubbered armored for water and shock protection. Soft rubber grips Fully-multi coated optical glass lens port for high ...
-
Pioneer DC500 - page 91
EN-91 MUST DO f or under w a ter housing: 1. Read and understand the instructions contained in this manual before using the underwater housing. 2. Do not exceed the depth rating of 60m (200ft.) or the housing may leak. 3. Follow these important O-ring care instructions or the waterproof housing may leak. Inspect and clean O-ring and O-ring contact ...
-
Pioneer DC500 - page 92
EN-92 Open view of waterproof housing The housing door uses one O-ring to form a waterproof seal. Important: Carefully clean and inspect O-ring and O-ring contact surfaces before each underwater use in accordance with instructions provided in this manual. If O-ring needs to be replaced, contact your local authorized SeaLife dealer or the SeaLife Se ...
-
Pioneer DC500 - page 93
EN-93 Maintaining a w a te r p r oo f seal Every SeaLife housing is tested for quality and a waterproof seal. It is your responsibility to properly care for the O-ring and O-ring contact surfaces to maintain a waterproof seal. Carefully follow these important O-ring care instructions. Not following these care instructions may cause the waterproof h ...
-
Pioneer DC500 - page 94
EN-94 Quick waterproof test Wrap a small soft weight in a blue paper towel, place inside housing and close the lid to seal the housing. The blue paper towel makes it easier to see a leak. Make sure not to pinch the paper towel in the O-ring . Place the sealed housing in a tub of cold water for about one hour . No leaks should be present. If the hou ...
-
Pioneer DC500 - page 95
EN-95 HOW T O INST ALL AND REMO VE O-RING T o Install O-ring: Step 1: O-ring and O-ring g r o o v e must be complete l y c lean be f o r e installing O-ring. Step 2: Push O-ring into g r o o v e as sh o wn being ca r eful not to twist or r oll O-ring. Step 3: Use t w o finge r s to push last pa r t o f O-ring into gr o o v e . Step 4: Ca r eful l y ...
-
Pioneer DC500 - page 96
EN-96 T o R em o v e O-ring: Step 1: Push O-ring along g r o o v e until it lifts. Step 2: Gent l y lift and r em o v e O-ring f r om its g r o o v e. ...
-
Pioneer DC500 - page 97
EN-97 HOW T O OPEN AND CLOSE WA TERPROOF HOUSING Step 1: Push in lo c king t a b to open l a t c h. Step 2: Open l a t c h all the w a y to lift and r elease l a t c h f r om housing. Step 3: Open Housing as sh o wn so inner came r a does not f all out. ...
-
Pioneer DC500 - page 98
EN-98 Step 4: Close housing and push d o wn on l a t c h as sh o wn to fi r m l y se a t l a t c h into housing. Step 5: Push d o wn l a t c h until lo c king t a b c li c ks into place. ...
-
Pioneer DC500 - page 99
EN-99 Installing the Flash Link optical cable adapter The Flash Link adapter connects the SeaLife Flash Link optical cable (item # SL962 - optional accessory) to the DC500 camera. This adapter is only needed when using the SeaLife External Flash (item # SL960 – optional accessory) or Digital Flash (item # SL960D – optional accessory). It is str ...
-
Pioneer DC500 - page 100
EN-100 Step 3:Atta c h ad a pter a r ound housing lens po r t so th a t it is se a ted into the flash wind o w r ecess. If using two Flash Links, attach other cable in second hole and follow above instructions. ...
-
Pioneer DC500 - page 101
EN-101 H o w to set-up the W a te r p r oo f Housing Set up camera 1. Insert charged battery (Lithium ion type 3.7V 650 mAh). Make sure you insert the batteries with the correct + and – polarity . 2. Clean camera lens with dry , clean cotton cloth. 3. Remove camera strap since this may prevent the camera from correctly seating itself inside the h ...
-
Pioneer DC500 - page 102
EN-102 6. Do not allow any water droplets to get inside housing. This will cause the inside of the housing to fog. 7. Close housing lid tightly . Make sure there are no obstructions that prevent the housing from closing. Make sure lid is tightly pressed into housing. 8. Close housing latch. Make sure the lid is pressed evenly against the housing bo ...
-
Pioneer DC500 - page 103
EN-103 Using and c leaning the under w a ter housing and camera Entering the water with housing 1. Do not enter water with camera in your hand. Have someone hand you the camera after you have entered the water . 2. For tips on taking pictures, see “Great Pictures Made Easy” on page 104. 3. Inspect housing for any leaks right after submerging ho ...
-
Pioneer DC500 - page 104
EN-104 Prepare housing for storage 1. Before storing the housing and camera, remove batteries, SD card and keep in a clean dry area. Make sure the housing and any accessories are clean and dry before storage. 2. Never store camera or housing in direct sunlight or in a dark damp area. The airtight, unbreakable SeaLife ReefMaster Dry Case (Item # SL9 ...
-
Pioneer DC500 - page 105
EN-105 3. Move calmly and control your buoyancy before taking a picture. It is very hard to take good pictures when you are moving. Look around for great picture opportunities. First position yourself at the best angle, and neutralize your buoyancy . Second, use the LCD monitor to perfectly frame your subject, check your shooting distance and keep ...
-
Pioneer DC500 - page 106
EN-106 7. Use the QuickShoot Mode for fast moving objects. Some fish move very fast and are difficult to photograph. Using the QuickShoot Mode allows you to set the focusing and exposure for a particular underwater scene. When the QuickShoot mode is enabled, the camera’s shutter lag (shutter response time) is less than 1 second so you don’t mis ...
-
Pioneer DC500 - page 107
EN-107 T r ouble shooting guide Problem Possible cause Corrective Action No Power Battery power low Battery + and - not inserted Check that the battery is correctly . inserted correctly Power save function activated.. Turn camera back on. Camera damaged Contact service center. Camera gets hot Constant use of camera. This is normal. No PC connection ...
-
Pioneer DC500 - page 108
EN-108 Problem Possible cause Corrective Action Poor Video connection Video cable not fully inserted into camera or TV Make sure video cable is completely inserted into video jack of camera docking station. Also check that connection to TV/VCR is correct. “Memory full” message Memory storage is full. Delete images or download to PC. Insert empt ...
-
Pioneer DC500 - page 109
EN-109 Problem Possible cause Corrective Action Overexposed image T o close to reflective object. Move farther away from subject (4’ to 6’). T urn flash head slightly away from subject. Use External Flash Diffuser (SL968) and set camera to macro flash. Flash not firing Flash on Auto and is not needed. T urn fill-flash ON (see page 36 ) Finger o ...
-
Pioneer DC500 - page 110
EN-110 Housing Specific a tions Underwater housing: Depth: Individual depth tested to 200’ (60m) Controls: Control buttons for power , Shutter , Zoom, LCD, Menu, Mode, 4 navigation buttons, OK and Delete buttons O-ring: Silicone Lens port: Fully multi-coated optical glass lens port with snap-on ring to adapt accessory lenses. LCD: Optical grade p ...
Hai una domanda su Pioneer DC500?
Utilizza il modulo sottostante
Se non hai risolto il problema con Pioneer DC500 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Pioneer DC500 è probabile che voglia condividere il modo di risolverlo.