Manuale per l’uso UNICOM 802.11b+g

35 pagine 2.39 mb
Scarica

Vai alla pagina of 35

Summary
  • UNICOM 802.11b+g - page 1

    802.11b+g Wireless USB Adapter User’s Manual www.unicomlink.com U N I D O C 1 1 1904 pn: WEP-45020G ...

  • UNICOM 802.11b+g - page 2

    REGULATORY STATEMENTS FCC Certification The United St ates Federa l Communication Commission (F CC) and the Canadian Department of Communicati ons have estab lished certain rules governing the use of electronic equipment. Part15, Class B This device co mplies with Part 15 of FCC rul es. Operation is subject to the following two conditions: 1) This ...

  • UNICOM 802.11b+g - page 3

    Table of Contents INTROD UCTION ................................................................................................... 1 F EATURES .............................................................................................................. 1 SOFTWARE INSTA LLATION ...................................................................... ...

  • UNICOM 802.11b+g - page 4

    - 1 - INTRODUCTION The 802.11b+g Wireless LAN USB Adapter is designed for a USB type A port of a laptop or desktop computer for creating a wireless workstatio n . It is USB 2.0 compliant which connects to any available US B port on a no tebook or desktop computer. The 802.11b+g Wireless LAN USB Adapter complies with IEEE 802.11g standard that off e ...

  • UNICOM 802.11b+g - page 5

    - 2 - SOFTWARE INSTALLATION Step 1: Install the Driver & Utility For Windows 98, 2000, ME and XP users Caution ! Do not insert th e wireless LAN adapter into your computer un til the procedu res in “ Install the Driver& Utility” have been performed. 1. Exit all Windows programs. Insert the included CD-ROM into your computer. The CD-ROM ...

  • UNICOM 802.11b+g - page 6

    3. When the Welcom e screen appea rs, clic k Next to continue. 4. The installation program will start running automatically. Follow the on-screen instructio n to proceed. 5. Click Finish to com plete the software install ation. - 3 - ...

  • UNICOM 802.11b+g - page 7

    - 4 - ...

  • UNICOM 802.11b+g - page 8

    - 5 - HARDWARE INSTALLATION Windows 2000/XP Note : Before you install the d evice to your compu ter, make sure you have i nstalled the driver and utility a s des cr ibe d in the p re vio us section. Window s XP 1. Locate your USB host and insert the USB Adapter. 2. Once the devic e has been inserted to y our computer, Windows will detect the new ha ...

  • UNICOM 802.11b+g - page 9

    - 6 - 4. Click Continue An yway → Finish to complete the hard ware installation. Window s 2000 Insert the USB adapter into the U SB port of your computer and th en click Yes to complete the hardware installatio n. Windows 98/ME In Window 98/ME, you only have to insert the USB adapter into the USB port of your comput er to complete the hardware in ...

  • UNICOM 802.11b+g - page 10

    - 7 - Verify To verify if the device exists in your computer and is enabl ed, go to Start  Settings  Control Panel  System (  Hardw are)  Device Manager . Expand the Network Adapters category. If the 802.11b+g USB Wireless LAN Adapter is listed here , it means that your devi ce is properly installed and enabled. ...

  • UNICOM 802.11b+g - page 11

    - 8 - NETWORK CONNECTION Once the devic e driver is wel l installed, a n etwork setting described in the following should be also established. In Windows 98SE/ME 1. Go to Start  Settings  Control Panel  Network . 2. Make sure t hat all t he required com ponents are installed. If any compone nts are m issing, cl ick on the Add bu tton to ad ...

  • UNICOM 802.11b+g - page 12

    - 9 - 3. For m aking you r com puter visibl e on the netw ork, ena ble the File and Print Sharing . 4. Click the Identifica tion tab. Make up a name that is uniqu e from the other c omputers' nam es on the net work. Type the nam e of y our workgroup , which should b e the same used by all of the other PCs on the networ k. ...

  • UNICOM 802.11b+g - page 13

    5. Click the Access Contr ol tab. Ma ke sure t hat “ Share-level access control ” is selected. If connecting to a Netware se rver, share level can be set to “ User-le vel access control .” 6. When finished, restart your com puter to activate the ne w device. - 10 - ...

  • UNICOM 802.11b+g - page 14

    In Window s 2000/XP 1. (In Windows 20 00 ) Go to Start  Settings  Control Panel  Network and Dial-up Connections  Local Area Connection  Properties . (In Windows XP ) Go to Start  Control Panel  Network and I nternet Connections  Network Connection  Wireless Network Co nnection Enable d USB Wireless Net work Adapter. - 11 ...

  • UNICOM 802.11b+g - page 15

    2. M ake sure that all t he required c ompone nts are inst alled. 3. If any co mponent s are missing, cl ick on the In stall… bu tton to select the Client/Ser vice/Protoc ol re quired. After sele cting t he compone nt you need, click Add… to add it in. 4. For making your co mputer visible on the ne twork, make sure you have instal led File and ...

  • UNICOM 802.11b+g - page 16

    - 13 - IP Address Note : When assigning IP Addresses to th e computers on the networ k, remember to have the IP a ddress for each computer set on the same subnet mask. If your Broadband Router use DHCP technology , however, it won’t be n ecessary for you to assign Static IP Address for your computer. 1. To configure a d ynamic IP address (i .e. i ...

  • UNICOM 802.11b+g - page 17

    - 14 - Configuration Utility After the Wireless adapter has been s uccessfully insta lled, users can us e the included Configuration Utility to set their pref erence. Go to Start J Program J 80 2.11b+g Wireless LAN J 802.11b+g USB Wireless LAN Utility For Windows 2000/XP , the Configurati on Utility icon will al so appear in t he taskbar. You can o ...

  • UNICOM 802.11b+g - page 18

    - 15 - Note : There will be two modes – Station and Access Point for you to switch, y ou can select the m ode you nee d from the pull- down m enu. ...

  • UNICOM 802.11b+g - page 19

    - 16 - Station Select Station mode, and you will se e the following figure. Channel Shows the select ed channel that is curren tly in use. (There are 14 channels available, d epending on the country.) Type The infrastructure is intended for the conn ection between wireless network cards and an Access Point . With the wirel ess adapter, you can conn ...

  • UNICOM 802.11b+g - page 20

    Tx Rate Click the down arrow ▼ to select the Tx Rate from Auto , 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48 , 54 Mbps , you can select up to 54 Mbps. Encrypt WEP is a data privacy mechanism based on a 64-bit/128-bit shared key algorithm. More Setting… Click the More Setting button to configure, see the following figure (Refer to the More Setting p ...

  • UNICOM 802.11b+g - page 21

    Tx Frame The quantities for the wireless net work card transm it. (Frame: The unit of packet) Rx Frame The quantities for the wire less network card receive. (Frame: The unit of packet) More Setting… Channel The Channel wil l change automa tically according to AP’s setting. Tx Rate Click the down arrow ▼ to select t he Tx Rate from Auto , 1, ...

  • UNICOM 802.11b+g - page 22

    - 19 - Netw ork Type The infrastructure is intende d for the connection betwe en wireless network cards and an Access Point. With the wireless adapter, you can conn ect wireless LAN to a wired glob al network via an Access Point The Ad-hoc lets you set a small wi reless workgroup easily and quickly. Equipp ed with the wireless adapter, you can shar ...

  • UNICOM 802.11b+g - page 23

    - 20 - Default Key ID : You can set your default key I D at #1~#4. Key Format : Select Hexadecimal if yo u are u sin g hexa dec imal numbers ( 0-9, or A-F ). Select ASCII if you are using AS CII characters ( case-sensitive ). 10 hexadecimal digits or 5 ASCII characters ar e needed if 64-bit WEP is us ed; 26 hexadecimal digits or 13 ASCII charac ...

  • UNICOM 802.11b+g - page 24

    Certificate : Please query your network man ager about the certificate, se lect the sam e certificat e as the c ertification server. Load You may sel ect alre ady saved f ile from th e "Profile name" list, and then press "Load " . The setting status will th en be restored. Save Current You may save current setting to profile a ...

  • UNICOM 802.11b+g - page 25

    - 22 - Advanced Setting User Interface Language Select English o r Traditional Ch inese. Power Consumption Setting Continuous Acc ess Mode (CAM) When this mode is select ed, the power supply will b e normally provided even when there is no throughput. Maximum Power-Saving Mode When this mode is selected, this device will sta y in p ower saving mode ...

  • UNICOM 802.11b+g - page 26

    - 23 - Country Roaming World Mode This function is only enabled an d effective wi th 802.11d standard. User Select Enable this function to se lect the country you are now locating. Fragmentation Threshold The mechanis m of Fragm entation Threshold is used to improve the efficiency when high traffic flows along in the wir eless network. If your 802. ...

  • UNICOM 802.11b+g - page 27

    - 24 - Access Point To set your 802.11g Wi reless LAN USB Adapter as an Access Point (AP). In access point mode, the 802.11g Wireless LAN USB Adapter will function as an access point. This allows you to set up your wireless networks without using a dedicated AP devic e. Up to 16 wire less stations can associate to th e 802.11g Wireless LAN USB Adap ...

  • UNICOM 802.11b+g - page 28

    - 25 - Network Adapter You can select the network a dapter from the pull-down menu, it shows the device itself ( the 802.11g Wireless LAN USB Adapter ) and also shows the devices supported by the 802.11g Wireless LAN USB Adapter. Connection Station List It shows the stations which are now connecting to the AP. Channel Shows the selec ted channe ...

  • UNICOM 802.11b+g - page 29

    Tx Frame The quantities for the wireless network card transmit. (Frame: The unit of packet) Rx Frame The quantities for the wireless network card receive. (Frame: The unit of packet) More Setting… - 26 - ...

  • UNICOM 802.11b+g - page 30

    - 27 - Channel Shows the selec ted channel tha t is curren tly in use. (There ar e 14 channels available, d epending on the country.) Mode Select Mixed Mod e or 802.11b only , 802.11g only standard Mode (If you choose this optio n the device will autom atically convert the suitable standard ). SSID The SSID is the unique name shared among all point ...

  • UNICOM 802.11b+g - page 31

    - 28 - Authentication Mode Select the Authentication m ode from the pull-down menu, there are two modes for y ou to choose, Open S ystem and Shared Key . Fragment The mechanism of Fragm entation Threshold is used to improve the efficiency when high traffic flows along in th e wireless network. If your 802. Wireless LAN Adapter often tran smit large ...

  • UNICOM 802.11b+g - page 32

    MAC Address Filter Click Setting and you will see the following figure. You can selec t the Filter T ype from the pull-down menu. Disable : Select to disable th e filter fun ction. Accept : You can type in 15 MAC addresses by clicking Change . If you select Accept, then the MAC address(es) you type in will be connected to the AP. Reject : You ...

  • UNICOM 802.11b+g - page 33

    - 30 - Appendix Soft AP Confi guration Setup Requirement: To bridge your wired and wireless network using 802.11b+g Wireless LAN USB Adapter, t he following must be met: 1. Install the 802.11b+g Wireless LAN USB Adapter on the LAN-connected computer. 2. The Soft Access Point should be connected to a network switch, hub or a Broadband Router. Use a ...

  • UNICOM 802.11b+g - page 34

    - 31 - 1. Select the Ac cess P oint mode, an d you will see the following figur e 2. Click the More Setting… button and the following figure will appear for you to configure 3. Select the wir ed Network Adapter tha t has alread y installed in the PC from the pull-down menu. ...

  • UNICOM 802.11b+g - page 35

    - 32 - 4. If the network connected to the wire d LAN card has a DHCP server, you just need to configur e the wireless station as a DHCP client (select Obtain an IP address automatically ). If the network does not hav e a DHCP server, you must assign a fixed IP to th e wired PC (select Use the following IP address). ...

Fabbricante UNICOM Categoria Network Card

I documenti che otteniamo dal fabbricante del dispositivoUNICOM 802.11b+g possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici UNICOM
- manuali per l’uso 802.11b+g
- schede prodotto UNICOM
- opuscoli
- o etichette energetiche UNICOM 802.11b+g
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso UNICOM 802.11b+g.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione UNICOM 802.11b+g, manuali di manutenzione, brevi manuali o manuali utente UNICOM 802.11b+g. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto UNICOM 802.11b+g.

Manuali per l’uso simili

Manuale completo del dispositivo UNICOM 802.11b+g, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare UNICOM 802.11b+g dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti UNICOM 802.11b+g.

Il manuale per l’uso completo UNICOM, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale UNICOM 802.11b+g - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice UNICOM 802.11b+g, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per UNICOM 802.11b+g che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo UNICOM 802.11b+g - che ci dovrebbe aiutare nei primi passi durante l'uso UNICOM 802.11b+g
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del UNICOM 802.11b+g
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio UNICOM 802.11b+g in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su UNICOM 802.11b+g?

Utilizza il modulo sottostante

Se non hai risolto il problema con UNICOM 802.11b+g con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con UNICOM 802.11b+g è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)