English dropdown-ico

Manual Fujitsu FCN-087

18 pages 2.7 mb
Download

Go to site of 18

Summary
  • Fujitsu FCN-087 - page 1

    1 2mm PITCH METRIC CONNECT ORS FOR PCB CONNECTION FCN-086 /087 SERIES n OVERVIEW Fujitsu’s 2mm hard metric connector F-P ACK-3 (FCN-086/087 series) are connectors for connecting boards developed to support high-speed transmission/high density packaging of communication equipment, conforms to IEC 917 (DIN 43355) and IEC 61076-4-101, and supports c ...

  • Fujitsu FCN-087 - page 2

    2 FCN-086 / 087 Series Dimensions are in millimeters (inches) www .fcai.fujitsu.com Specications subject to change n CONFIGURA TION OF F&T 2 MM H.M. CONNECTOR 1. Basic conguration of socket/plug There are ve types of sockets: three basic types: type A (1 10 contacts), type B (125 contacts), and type C (55 contacts), and a 1 10 contact ...

  • Fujitsu FCN-087 - page 3

    3 FCN-086 / 087 Series Dimensions are in millimeters (inches) www .fcai.fujitsu.com Specications subject to change The contact pins have a three-level sequence structure and can be connected/disconnected in an ac- tive state. The terminal side can support various applications with four types of length. These combi- nations allow 20 types of term ...

  • Fujitsu FCN-087 - page 4

    4 FCN-086 / 087 Series Dimensions are in millimeters (inches) www .fcai.fujitsu.com Specications subject to change   ? ...

  • Fujitsu FCN-087 - page 5

     FCN-086 / 087 Series Dimensions are in millimeters (inches) www .fcai.fujitsu.com Specications subject to change n TRANSMISSION CHARACTERISTICS The transmission characteristics were designed to an optimum level by repeating various transmission characteristics simulations when the structure was designed, so as to improve the transmission cha ...

  • Fujitsu FCN-087 - page 6

    FCN-086 /087 Series Compact PCI / VME 6-6 Dimensions are in millimeters (inches) www .fcai.fujitsu.com Specications subject to change n ST ANDARD AND HOT SW AP P ART NUMBERS Coding Keys for Daughter Card Coding Keys for Midplane/Backplane Backplane P5 P 4 P 1 P 2 P 3 M ale P i n H ea de rs J 5 J 4 J 1 J 2 J 3 1 60.0 (6. 3 0) 3 U =1 00.0 ( 3 . 93 ...

  • Fujitsu FCN-087 - page 7

    FCN-086 /087 Series Compact PCI / VME 6-7 Dimensions are in millimeters (inches) www .fcai.fujitsu.com Specications subject to change Unit: mm (in.) Thickness: 1.4 to 5.6 mm (.055 to .220 in.) Drill hole Diameter: φ 0.7 ±0.025 mm (.028 in.) Through hole diameter (after plating): φ 0.6 ±0.05 mm (.024) n DIMENSIONS ? ...

  • Fujitsu FCN-087 - page 8

    FCN-086 /087 Series Compact PCI / VME 6-8 Dimensions are in millimeters (inches) www .fcai.fujitsu.com Specications subject to change Unit: mm (in.) Thickness: 1.4 to 5.6 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7 ±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6 ±0.05 mm (.024) n DIMENSIONS  ...

  • Fujitsu FCN-087 - page 9

    FCN-086 /087 Series Compact PCI / VME 6-9 Dimensions are in millimeters (inches) www .fcai.fujitsu.com Specications subject to change Unit: mm (in.) Thickness: 1.4 to 5.6 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7 ±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6 ±0.05 mm (.024) n DIMENSIONS n MOUNTING HOLE LA YOUT Unit: ...

  • Fujitsu FCN-087 - page 10

    FCN-086 /087 Series Compact PCI / VME 6-10 Dimensions are in millimeters (inches) www .fcai.fujitsu.com Specications subject to change Unit: mm (in.) Thickness: 1.4 to 5.6 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7 ±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6 ±0.05 mm (.024) n DIMENSIONS n MOUNTING HOLE LA YOUT Unit: ...

  • Fujitsu FCN-087 - page 11

    FCN-086 /087 Series Compact PCI / VME 6-1 1 Dimensions are in millimeters (inches) www .fcai.fujitsu.com Specications subject to change Unit: mm (in.) Thickness: 1.4 to 5.6 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7 ±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6 ±0.05 mm (.024) n DIMENSIONS n MOUNTING HOLE LA YOUT Unit ...

  • Fujitsu FCN-087 - page 12

    12 FCN-086 / 087 Series Dimensions are in millimeters (inches) www .fcai.fujitsu.com Specications subject to change Part Numbers DISCONTINUED, NO AL TERNA TE Parts available 90º 0.4 0 -0.1 (0.016 0 ) -0.004 1±0.1 (0.139±0.004) (16.2) [0.638] 0.4±0.05 (0.016±0.002) 10.85 (0.427) 4 x (6-1)=20 (0.787) 6.7 (0.264) 21.7±0.2 (0.854±0.008) 4±0. ...

  • Fujitsu FCN-087 - page 13

    13 FCN-086 / 087 Series Dimensions are in millimeters (inches) www .fcai.fujitsu.com Specications subject to change FCN-086J095-G/MSD-BCR (bottom shield plate) Thickness: 1.4 to 2.0 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7 ±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6 ±0.05 mm (.024)  ? ...

  • Fujitsu FCN-087 - page 14

    14 FCN-086 / 087 Series Dimensions are in millimeters (inches) www .fcai.fujitsu.com Specications subject to change Unit: mm (in.) Unit: mm (in.) Thickness: 1.4 to 2.0 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7 ±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6 ±0.05 mm (.024) SOCKET : 1 10 CONT ACTS n MOUNTING HOLE LA YOU ...

  • Fujitsu FCN-087 - page 15

     FCN-086 / 087 Series Dimensions are in millimeters (inches) www .fcai.fujitsu.com Specications subject to change Unit: mm (in.) Thickness: 1.4 to 2.0 mm (.055 to .220 in.) Drill hole Diameter: ∅ 0.7 ±0.025 mm (.028 in.) Through hole diameter (after plating): ∅ 0.6 ±0.05 mm (.024) SOCKET : 1 10 CONT ACTS WITHOUT KEY n ORDERING P ART ...

  • Fujitsu FCN-087 - page 16

    16 FCN-086 / 087 Series Dimensions are in millimeters (inches) www .fcai.fujitsu.com Specications subject to change Unit: mm (in.) Thickness: 1.4 to 2.0 mm (.055 to .220 in.) Drill hole Diameter: ∅ 0.7 ±0.025 mm (.028 in.) Through hole diameter (after plating): ∅ 0.6 ±0.05 mm (.024)   ? ...

  • Fujitsu FCN-087 - page 17

    17 FCN-086 / 087 Series Dimensions are in millimeters (inches) www .fcai.fujitsu.com Specications subject to change CODING KEY n DIMENSIONS n ORDERING P ART NUMBER: 8.9 (0.350) 2.2 (0.087) 5.75 (0.226) 6.55 (0.258) 2.9 (0.1 14) 7.9 (0.31 1) 3.15 (0.124) 2.35 (0.093) 6.1 (0.240) 9.2 (0.362) 2 (0.079) 3.8 (0.150) 6.75 (0.266) n ORDERING P ART NUMB ...

  • Fujitsu FCN-087 - page 18

    18 FCN-086 / 087 Series Dimensions are in millimeters (inches) www .fcai.fujitsu.com Specications subject to change  Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku T okyo 141, Japan T el: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www .fcl.fujitsu.com ? ...

Manufacturer Fujitsu Category TV Cables

Documents that we receive from a manufacturer of a Fujitsu FCN-087 can be divided into several groups. They are, among others:
- Fujitsu technical drawings
- FCN-087 manuals
- Fujitsu product data sheets
- information booklets
- or energy labels Fujitsu FCN-087
All of them are important, but the most important information from the point of view of use of the device are in the user manual Fujitsu FCN-087.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Fujitsu FCN-087, service manual, brief instructions and user manuals Fujitsu FCN-087. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Fujitsu FCN-087.

Similar manuals

A complete manual for the device Fujitsu FCN-087, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Fujitsu FCN-087 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Fujitsu FCN-087.

A complete Fujitsu manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Fujitsu FCN-087 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Fujitsu FCN-087, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Fujitsu FCN-087, that we can find in the current document
3. Tips how to use the basic functions of the device Fujitsu FCN-087 - which should help us in our first steps of using Fujitsu FCN-087
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Fujitsu FCN-087
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Fujitsu FCN-087 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Fujitsu FCN-087?

Use the form below

If you did not solve your problem by using a manual Fujitsu FCN-087, ask a question using the form below. If a user had a similar problem with Fujitsu FCN-087 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)