Manual National Instruments RS-485

8 pages 0.26 mb
Download

Go to site of 8

Summary
  • National Instruments RS-485 - page 1

    FieldPoint ™ is a trademark of National Instruments Corporation. Product and company names are trademarks or trade names of their respective companies. 321698A-01 © Copyright 1997 National Instruments Corp. All rights reserved. July 1997 FP-1001 FieldPoint RS-485 Network Module Highlights • Isolated RS-485 interface to host computer or to FP-1 ...

  • National Instruments RS-485 - page 2

    2 The FP-1001 has a simple rail clip for mounting reliably onto a standard 35 mm DIN rail. To install the FP-1001 to the DIN rail, follow these steps: 1. With a flat bladed screwdriver, open the DIN rail clip to the unlocked position as shown in Figure 1. Figure 1. DIN Rail Clip 2. Hook the lip on the rear of the FP-1001 onto the top of a 35 mm DIN ...

  • National Instruments RS-485 - page 3

    3 Figure 3. Installed Network Module Network Connection Connect the FP-1001 to a host computer, or to the RS-485 repeater port of an FP-1000, using the 5 position Combicon screw terminal adapter of the RS-485 connector on the FP-1001. You may connect up to 25 FP-1001 network modules to a single RS-485 port of a host computer, or up to 24 FP-1001 ne ...

  • National Instruments RS-485 - page 4

    4 The RX+ of the host port (or FP-1000 RS-485 repeater port) must be connected to the TX+ of all of the FP-1001 modules, and the RX- of the host port (or FP-1000 RS-485 repeater port) must be connected to the TX- of all of the FP-1001 modules. This pair of connections provides communication to the host computer from the FP-1001 modules. These conne ...

  • National Instruments RS-485 - page 5

    5 modules on different serial ports may have the same address. Every module on one serial port of a host computer must have the same baud rate. Figure 6. Address and Baud Rate Switch Switches 1-5 set the network address of the FP-1001. The addresses of the terminal bases connected to the network module are automatically configured to be sequentiall ...

  • National Instruments RS-485 - page 6

    6 Switches 6-8 set the baud rate of the FP-1001. Table 2 shows the switch positions and the corresponding network baud rates. 40 170 50 180 60 190 70 200 80 210 90 220 100 230 110 240 120 Other Settings Not Allowed Table 2. Baud Rate Switch Settings Switch Positions 6-8 Network Module Baud Rate Switch Positions 6-8 Network Module Baud Rate 300 1920 ...

  • National Instruments RS-485 - page 7

    7 Powering the FP-1001 NOTE: Terminal bases must be connected to the FP-1001, and the baud rate switch must be set, before power is applied to the FP-1001. An 11-30 VDC power supply is required by each FieldPoint stack. The network module filters and regulates this supplied power and provides power for all the I/O modules in the stack. Therefore yo ...

  • National Instruments RS-485 - page 8

    RS-485 isolation ............................... 2500 Vrms breakdown, 250 Vrms operational Power Consumption.......................... 1 W + 1.15 * ∑ (I/O module power requirements ) Operating Temperature ..................... -40 °C to +70 °C Storage Temperature ......................... -55 °C to + 100 °C Relative Humidity ................. ...

Manufacturer National Instruments Category Video Gaming Accessories

Documents that we receive from a manufacturer of a National Instruments RS-485 can be divided into several groups. They are, among others:
- National Instruments technical drawings
- RS-485 manuals
- National Instruments product data sheets
- information booklets
- or energy labels National Instruments RS-485
All of them are important, but the most important information from the point of view of use of the device are in the user manual National Instruments RS-485.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals National Instruments RS-485, service manual, brief instructions and user manuals National Instruments RS-485. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product National Instruments RS-485.

A complete manual for the device National Instruments RS-485, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use National Instruments RS-485 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of National Instruments RS-485.

A complete National Instruments manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual National Instruments RS-485 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the National Instruments RS-485, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the National Instruments RS-485, that we can find in the current document
3. Tips how to use the basic functions of the device National Instruments RS-485 - which should help us in our first steps of using National Instruments RS-485
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with National Instruments RS-485
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of National Instruments RS-485 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning National Instruments RS-485?

Use the form below

If you did not solve your problem by using a manual National Instruments RS-485, ask a question using the form below. If a user had a similar problem with National Instruments RS-485 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)