Manual HP (Hewlett-Packard) 0706124 REV B

150 pages 2.91 mb
Download

Go to site of 150

Summary
  • HP (Hewlett-Packard) 0706124 REV B - page 1

    1 DisplayMaker Legacy Mach 12 User Manual Part Num ber 0706124 Rev B ...

  • HP (Hewlett-Packard) 0706124 REV B - page 2

    2 Legal notices © Copyright 200 8 Hewlett- Packard Develo pment Compan y, L.P. The inform ation contained herein is subjec t to change without notice. T he only warr anties for HP products and ser vices are s et forth in the ex press warr anty statements accompanying suc h products and ser vices. Not hing herein shou ld be constr ued as constituti ...

  • HP (Hewlett-Packard) 0706124 REV B - page 3

    iii Caut ion SEVERE DAMAGE TO THE PRINTHEAD C ARRIA GE CIRCUIT BOARD AND PRINT- HE AD WILL OCCUR IF A PR INTHE A D IS REMOVED WHILE PO WER IS SUPPLIED TO THE PRINTHE AD. Repa ir ing t his da mage will requir e a ser vice call and replace ment of t he p r int- head car r iage c ircuit boar d and pr int head a t cus- tomer expen se. T o avoid electri ...

  • HP (Hewlett-Packard) 0706124 REV B - page 4

    iv Revision Log Th e fol lo wing is a list of m ajor chang e s an d addi t ions t ha t hav e bee n m a de to this m anual sinc e it w as first rel eas ed. See th e a ccompan ying Rel e as e N ote s for specif ic chan g es to the soft w are an d har dw are bet wee n m anual upda t es. Rele ase Dat e Descr ipt ion May 2 00 1 Manual f irst rele ased. ...

  • HP (Hewlett-Packard) 0706124 REV B - page 5

    v Regulator y St atements FCC-A This equi pm ent ha s been test ed an d foun d to comp ly with th e limit s fo r a Class A digi tal device , pursuan t to P art 1 5 of th e FCC Rules. Th ese limits are design ed to provi d e reasona bl e protec- t ion a gainst harm f ul i nt erference wh en the equipmen t is op er- a ted in a commercial environm ent ...

  • HP (Hewlett-Packard) 0706124 REV B - page 6

    vi Telecom municat ions Net work Statement Th e Col orS pan Vi deoN e t port on th is device is n ot in ten ded to be co nnected to a pu blic tel ecommunic a t ions net wor k. Co nnec- t io n of th is device to a pu blic t el ecommun ica t io ns net work in a Europe an Com munit y M em ber St a te wi ll be in violat ion of na t ional law imp l emen ...

  • HP (Hewlett-Packard) 0706124 REV B - page 7

    vii About This Manua l R ea d this manual to unpack, set up, an d use th e Co lorS pan Disp layM aker M ach 1 2 d igital c olor print er s. ◆ Chapter 1 shows you how to un pack and assemble the printer , and intro duces you to its main feature s. ◆ Chapter 2 shows you how to u s e the control panel. ◆ Chapter 3 shows you how to install ink an ...

  • HP (Hewlett-Packard) 0706124 REV B - page 8

    viii Convent ions Th is manual us es the f ollowing informa t ional conv e n t ions: Note A special tec hnique or informa tio n that may help you per form a t ask or understand a process. Hinweis Ein Hinw eis b e schreibt eine spez ielle technik zur Lösung einer Aufgabe oder e n thällt Inf o rmatione n, die Ihne n eine P rozedur näher er läuter ...

  • HP (Hewlett-Packard) 0706124 REV B - page 9

    Table of Contents ix T ABLE OF C ON TENT S Revisi on Lo g .. ........ ..... ....... ....... ........ ..... ....... ....... ..... ........ ....... ..... ........ ..... iv Regul atory Stateme nts ...... ....... ........ ..... ....... ....... ..... ........ ....... ........ ..... ...... v FCC-A . ....... ........ ..... ....... ....... ..... ........ . ...

  • HP (Hewlett-Packard) 0706124 REV B - page 10

    x Table of Conten ts Print Set ting s ...... ..... ....... ........ ..... ....... ........ ..... ....... ....... ..... ........ .. 2-11 Printe r Option s ...... ....... ....... ........ ..... ....... ........ ....... ..... ....... ........ .. 2-13 Reset All D efaults .... ..... ....... ........ ....... ..... ........ ....... ..... ....... ........ ...

  • HP (Hewlett-Packard) 0706124 REV B - page 11

    Table of Contents xi 4 Calibrating the Printer AutoS et... ....... ..... ........ ....... ..... ....... ........ ..... ....... ....... ..... ........ ....... ........ .. 4-2 Manua l Cali bratio ns ......... ....... ..... ........ ....... ....... ..... ........ ....... ..... ........ .. 4-3 Media F eed C alibra tion ..... ....... ........ ..... .... ...

  • HP (Hewlett-Packard) 0706124 REV B - page 12

    xii Table of Contents B Troubleshooting Trouble shootin g Ch ecklist ..... ..... ........ ....... ........ ..... ....... ....... ........ ..... .... B-2 Diagno stics ....... ........ ....... ..... ....... ........ ..... ....... ........ .... ........ ....... ..... ....... B -4 Band ing ....... ........ ....... ..... ....... ........ ..... ....... . ...

  • HP (Hewlett-Packard) 0706124 REV B - page 13

    G etti ng St a rte d 1-1 C HAPTER 1 Get t ing Star te d This chapter sh ows you h ow to g et st arted using your printer . It inclu des th es e topics : ◆ Operating Re quireme nts (page 1-2) ◆ Unpa cki ng a nd A ss embly (page 1-5) ◆ W ork f low O ver view (page 1-1 6) ◆ Par ts Over vie w (p age 1-1 7) ◆ Special Features (page 1-2 1) ...

  • HP (Hewlett-Packard) 0706124 REV B - page 14

    1-2 Opera ting Requirem ents Operat ing Requirem ents Choos e a loca t ion f or the print er b efore y ou unpack it. Keep th e foll owing requir emen t s in m in d: Electrical ◆ See “C onnecting to Po w er” on page 1-1 3 for detailed pow er requirem e nts. ◆ Use the sup p lied pow er cords. Plug them directly into a grounded e lectric al ou ...

  • HP (Hewlett-Packard) 0706124 REV B - page 15

    Operating Require ments 1-3 ◆ DO NOT install the printer nea r humidif iers, refrigerators, fans, w ater faucets, heate rs or similar equipme nt. ◆ DO NOT install the printer in a reas where the temperature change s abruptly , su c h as nea r air conditioners or in the path of direct sunlight. ◆ DO NOT expos e the printer to f lam es, dust or ...

  • HP (Hewlett-Packard) 0706124 REV B - page 16

    1-4 Opera ting Requirem ents Safet y W arnings WA R N I N G W I T H TH E P OWE R S W I TC H IN TH E OF F PO S IT I O N, POW E R MA Y S TILL BE SUPPLIED TO T HE PRINTE R C OMPONENTS. T o completely cut pow er from the printer , you m ust unplug the pow er cords from the pow er outlets. WA R N U N G WENN DER NETZSCHAL TER IN OFF POSITION STEHT, WIRD ...

  • HP (Hewlett-Packard) 0706124 REV B - page 17

    Unpack ing and Assembly 1-5 Unpacking and Assemb ly This procedure assumes tha t th e printer is in its final l o ca t ion. See th e Site Preparat ion Guide f or mo ving an d unpa cking hin ts. WA R N I N G The printer is too heavy to be lif ted safely by one person. At least t wo persons are required to lif t the printer . WA R N U N G Der Druck e ...

  • HP (Hewlett-Packard) 0706124 REV B - page 18

    1-6 Unpacki ng and As sembly 9. Remove the med ia spools, which are packed together under the printer module. Do no t remo ve th e prin ter m odule f rom th e pall et a t this t ime . The pr int e r rests o n t w o ship ping supports. Y ou will us e th es e supports a n d t wo ass embly supports to h elp ass em bl e the print e r . Note Replacement ...

  • HP (Hewlett-Packard) 0706124 REV B - page 19

    Unpack ing and Assembly 1-7 St and Assembly 1. Loc ate the st and legs  and  , an d the cr ossba r  . 2. Using the Phillips hea d screwdriver and eight of the scre ws provided, ass emble the stand. Start by positioning th e t w o stan d leg s uprigh t, a t appro x i- ma tely the wi dth o f th e cross bar . A lign the h o les o n the crossb ...

  • HP (Hewlett-Packard) 0706124 REV B - page 20

    1-8 Unpacki ng and As sembly Final Assembly 1. Remove the t wo red-hea ded bolts from the right-hand ship- ping sup por t. 2. Loc ate the assembly sup por ts ➍ . Th e ass embly supports ar e mirror i m a ges of each oth er ; th e f oam pad sh ould be positioned to w ar d th e en ds of th e prin ter . 3. Align the ass embly sup por ts  with the ...

  • HP (Hewlett-Packard) 0706124 REV B - page 21

    Unpack ing and Assembly 1-9 4. Thread one of the red-headed bolts that you removed from the ship ping sup por t  through the a ssemb ly sup por t into the pallet. Th e pallet con t ains a th rea de d nut th a t w ill accept th e b olt. Tighten th e bolt han d-t ig ht. 5. Att ach the other ass embly sup por t to the pallet with the other red-head ...

  • HP (Hewlett-Packard) 0706124 REV B - page 22

    1-10 Unpackin g and Asse mbly 7. Remove t he right-hand ship ping sup por t from the printer , and bolt it to the pallet as shown, using th e t wo red-h ead ed bolts provided. Do n ot remove t he bolts from t he r ear sup- por ts. No t e t hat t he “ tow er ” of th e support i s no w a t th e fron t of th e pallet. 8. Lif t the lef t-hand ship ...

  • HP (Hewlett-Packard) 0706124 REV B - page 23

    Unpack ing an d Assemb ly 1-11 9. Ge ntly tip the assembled stand on its back, and set it down on top of the ship ping sup por ts as shown in Fig. 1-6. 1 0. Using the t wo s ilver Phillips hea d sc re ws provided, at tach the st and to printer module. Th e silver s cr ews are req uired to establish an electrical ground connect ion bet ween th e pri ...

  • HP (Hewlett-Packard) 0706124 REV B - page 24

    1-12 Unpackin g and Asse mbly 1 6. Loc ate and connect the p rof iler docking station cable from the righ t-hand ink tray to the por t on the print er. 1 7. Using ten of the scre ws provided, att ach the ink trays ➌ and ➍ . Th e right an d lef t trays are mirror im a ges o f ea ch other . Posi- t ion the tra ys so th a t t h e inks l oa d f rom ...

  • HP (Hewlett-Packard) 0706124 REV B - page 25

    Unpack ing an d Assemb ly 1-13 2 1. I nstall the ser v ice station b y inser ting it into the rect angular cutout i nside the right e ndc ap (behind the contr ol panel). P o sit ion the s er vice st a t ion so that th e ed ge with th e wor d “ FR ONT ” is cl os est to t h e f ro nt of th e prin ter . Sli de th e s er- vice st a t ion f ully to ...

  • HP (Hewlett-Packard) 0706124 REV B - page 26

    1-14 Unpackin g and Asse mbly Connect ing to t he Pr int Ser ver Connect the printer to the print s er ver with th e i nclu d ed Vi deoN et (f or Color S pan print s er v e rs) or Eth ernet ca ble (n on- ColorS pan RI Ps). See Fig. 1-8. R efer to th e prin t s er v er (RIP) d ocumen ta t io n fo r f urth er instru c- t ions on connect i ng the prin ...

  • HP (Hewlett-Packard) 0706124 REV B - page 27

    Unpack ing an d Assemb ly 1-15 Pow er-Up Sequence T urn o n th e pow e r swi tch to o bs erv e th e t y pical po we r-up se q u e nc e : 1. Th e co nt rol panel b ack light i l lumi nat es. M ov e th e con trast lev er ( loca ted to t h e right of th e control pan el s creen) u p an d do w n unt il the co ntrol panel gra p hi cs an d m essag es are ...

  • HP (Hewlett-Packard) 0706124 REV B - page 28

    1-16 Wor kflow Overview Wor kf lo w Ove r vi ew Wh en the print er is c onnected to a ColorM ark Pr o print s er ver , h ere is h ow a t y pical prin t jo b progress es f rom th e cli ent w ork - stat ion to th e printer . If you are using a n on-ColorSpan RIP , re fer to th e do cum enta t io n tha t acco mpani es it f or details. 1. The operator ...

  • HP (Hewlett-Packard) 0706124 REV B - page 29

    Parts Overv iew 1-17 Par ts Over vie w Fig. 1-1. Major pa r ts of the printer 1 1 2 3 4 5 6 11 8 12 13 3 21 18 19 20 17 16 16 9 14 15 7 10 ...

  • HP (Hewlett-Packard) 0706124 REV B - page 30

    1-18 Par ts Overv iew Ind ex D escr ipt io n 1 End cap (t wo places) — i n c l u d e s r e m o v a b l e e n d c o v e r s for maint e nanc e acces s. 2S t a n d — sup p or ts the prin ter . 3 Caste rs (four place s) — e nables ea sy loc ation of the printer , c an be locked in place. 4E n c o d e r s t r i p — allows precise positioning of ...

  • HP (Hewlett-Packard) 0706124 REV B - page 31

    Parts Overv iew 1-19 15 D r y e r t u b e — c arries air blown from the dr y e r fans to the printed output. 1 6 Ink reser voi r tray (t w o places) — holds ink reser voir box e s. 1 7 Takeup gear box — po w ers the t akeup sp ool to auto- matic ally t ake up printed o utput. 1 8 VideoNet port — con nects printer to print ser ver . 19 P o w ...

  • HP (Hewlett-Packard) 0706124 REV B - page 32

    1-20 Par ts Overv iew Fig. 1-2. P r inthea d c arriage, printhea d covers open 22 22 23 23 23 24 25 Fig. 1-3. P rinthea d c arriage, tilted position for cleaning a nd acces sing ink tubes 26 27 ...

  • HP (Hewlett-Packard) 0706124 REV B - page 33

    Spec ial Featu res 1-21 Spec ial Features T he p ri nt e r h a s m a n y ad va nc e d f e at u r e s t o he l p y o u p r od uce t he best pri nt ed out put with th e le ast effor t . P er form an ce Features ◆ AutoSet Cali brat io n — use s a high-resolution digital imag- ing s e nsor to automatic ally align pr inthea ds in the x- y di r e c t ...

  • HP (Hewlett-Packard) 0706124 REV B - page 34

    1-22 Sp ecial F eatures ◆ User as sist ance — co ntrol panel features online help, interac- tive procedures, and diagnostics to assist the user “on-the- f ly ,” reducing training and trouble shooting time. ...

  • HP (Hewlett-Packard) 0706124 REV B - page 35

    Using t he Control P anel 2-1 C HAPTER 2 Using t he Control Panel This chapter des c ribes th e f un c t ions of th e control pan el. ◆ Over vie w (page 2-2) ◆ Front Page ( page 2-5) ◆ Navigation Ke ys (page 2-9) ◆ Men u (page 2-1 0) ◆ Men u Tree (page 2 -1 9) ...

  • HP (Hewlett-Packard) 0706124 REV B - page 36

    2-2 Overv iew Over v iew Th e tou ch-s creen con trol pa nel sh ows y ou th e prin ter ’ s curren t sta t us, and ena bl es you to intera c t with th e p rinter w hen chang- ing media and ink, res pon d to a n error con dit io n, or config ure op t ions . Th ere are thr ee m ain c on trol pa nel s creens: ◆ Rea dy (St atus) Screen ◆ Front Pag ...

  • HP (Hewlett-Packard) 0706124 REV B - page 37

    Overview 2-3 User Assistance The con trol p anel p rovi d es v arious f orms of online user assistance: Th e ? but ton provi d es an exp lanation of the curre nt fu n c t ion, with some g ui dance f or wha t to do ne xt . Th e A T TN (A t tent ion) key blin ks o n th e con trol panel w hen th e prin ter de tec t s an e rror co n dit ion , pot en t ...

  • HP (Hewlett-Packard) 0706124 REV B - page 38

    2-4 Overv iew Ti p See page 2-1 2 for instructions for choosin g an Exper t o r Novice mod e for displaying these me s- sages (Exper t mode routes most me ssages to the Actions & War nings me nu), and for disabl ing or e nabling the audible ala rm. ...

  • HP (Hewlett-Packard) 0706124 REV B - page 39

    Front Page 2-5 Front Page Th e Front P ag e pr ovi d es a ccess to th e most f r equently-us ed p r i nt i n g a nd ma in te n a nc e f u nc t i on s . For ad vanc e d c o nf ig u r a - t ion op t i on s, press th e M enu ke y (s ee “ Me n u ” on pa ge 2-1 0 for instru ct io ns). ◆ Pr inter Name — displays the name of the p rinter as def in ...

  • HP (Hewlett-Packard) 0706124 REV B - page 40

    2-6 Front Page ◆ Media & Ink — displays a listing of the media and ink cu r- rently inst al led in th e p rin ter . Pre s s th e p and C keys to highlight “Med ia” or one of the inks, the n pre ss B (P ro- ceed) to display information about the sele ction. From this scree n, you c an press the m and q ke ys to scroll bet wee n scree ns. ...

  • HP (Hewlett-Packard) 0706124 REV B - page 41

    Front Page 2-7 ◆ Status — displays the status of all us er-conf igurabl e options. P ress { (Page) to scroll bet w een page s. T o change an option, go t o the P rinter Configuration s ection of the me nu. ◆ Advanc e Media — press the p ke y to a dvance the media for- wa rd . When you press and hold the p ke y , the media mo ves faster . Y ...

  • HP (Hewlett-Packard) 0706124 REV B - page 42

    2-8 Front Page ◆ Pr int Mode — interactively assists you in installing print- hea ds in the correct positio ns, and s etting the number of print passes. See “Selecting a P rint Mod e” on page 3-7 fo r instructions. ◆ Carr iage — moves the c ar riage out of the ser vice st ation so you c an lo a d or clean the printhea ds and ink tube s, ...

  • HP (Hewlett-Packard) 0706124 REV B - page 43

    Navigation Keys 2-9 Na vigat ion Keys Th e fo llo win g ta bl e sh o ws yo u ho w to mo v e throu gh th e men u system and perform pri nter co ntrol f un c t ions. Key Des cr ipt ion v Display Me nu — displays t he printer me nu. C p Menu Up/Down — moves the menu highlight up and down the me nu. x w Menu Top/B ot tom — m o ve s the menu highl ...

  • HP (Hewlett-Packard) 0706124 REV B - page 44

    2-10 Menu Menu T he me n u h a s t h r e e ma i n se c t i on s : ◆ Calibrate P rinter (see below) ◆ P rinter Configuration (page 2-1 1) ◆ Ser vice Printer (page 2 -1 6) ◆ Wa rnings & Act ions (page 2-1 8), shown in Exper t Messag es Mode only This sect ion e xp la ins each of th e f uncti ons o n the print er m enu. Calibrate Pr inter ...

  • HP (Hewlett-Packard) 0706124 REV B - page 45

    Menu 2-1 1 Pr inter Conf igurat ion Printer Config ur a t i on enabl es you to s et man y opt ions that con- trol h ow th e prin te r opera tes. Pr int Set t ings ◆ Top Gut ters — allow s you to turn on or of f the gut ter pat- tern at the top edge of the print, which shows data about the print such as date an d time printed and print mode, plu ...

  • HP (Hewlett-Packard) 0706124 REV B - page 46

    2-12 Menu ◆ Head Hei ght — sets the he ight of the printhea d to Normal (0.0 5 0 inches/1.2 7 m m) or Custom . Use Normal unless the media is curling or the printhea d c arriage is striking the media. Low er settings reduce ink overspray , but increase the chance s of the printhea d striking the media. Whe n the head height is 0.0 7 0 in ches ( ...

  • HP (Hewlett-Packard) 0706124 REV B - page 47

    Menu 2-1 3 af ter manua lly winding back a s er vice loop. The d efault is Novice mod e. Whe n in Exper t mode, activ e Wa rnings, Change s, and Actions c an be displayed by s electing Warni ngs & Actions from the me nu, since Wa rnings will not cause the A T TN icon will ap pear in Expert mode. See “User Assis t ance” on page 2- 3 for f ur ...

  • HP (Hewlett-Packard) 0706124 REV B - page 48

    2-14 Menu ◆ OFF — no qualit y check is per formed, all jobs will print. ◆ Pr int P osit ion — positions the print in the horizont al (x-axis) direction, either in the center or f lush right. ◆ Media Supply Loop — the sup ply loop is the slack por tion of the media bet w een the plate n and sup ply spool. Wh en the media is backed up to ...

  • HP (Hewlett-Packard) 0706124 REV B - page 49

    Menu 2-1 5 Reset All Defaults ◆ Restore All Defaults — restore s all P r inter Configuration set- tings to thei r factor y default v alues, an d zeroe s all registra- tion data. Af ter running this option, all c alibration value s must be ree st ablished by running Aut oSet. ◆ Zero Platen Wid t h — s ets the platen width to zero, which forc ...

  • HP (Hewlett-Packard) 0706124 REV B - page 50

    2-16 Menu Ser v ice Pr inter User Diagnost ics Us er Dia gnostics pr es ent s an in ter activ e trou bl esh oot ing pro - gram to dia gnos e pro bl ems bef ore calling M acDer mi d ColorSpan T ech nical S er vices. It w a lks you th rough a s eri es of tests an d checks for certai n print er f un ct ions. Th e pr int er asks you to m ak e obs er v ...

  • HP (Hewlett-Packard) 0706124 REV B - page 51

    Menu 2-1 7 ◆ Dr yer Tes t — runs the dr y er heater assembly to test for cor- rect operat ion. ◆ Pr int Image on Image Sen sor — the pri nter prints a small set of lines which are sca nned by the digit al image se nsor . Then the printer prints an e nlargeme nt of the image as the se nsor ca p t u r e d i t . ◆ Hor izontal Dot Accurac y ? ...

  • HP (Hewlett-Packard) 0706124 REV B - page 52

    2-18 Menu Disable Media Sensor If the m ed ia s ensor is malf unct ioning, d isabl e it to cont inue prin t ing. N ote th at wi th th e m edia s e nsor disa ble d, th e prin t e r will not be abl e to de t ect wh en there is no m edia i n th e printer . Warnings & Act ion s Wh en in Expe rt m ode, a ct ive W arni ngs, Chang es, an d A ct io ns ...

  • HP (Hewlett-Packard) 0706124 REV B - page 53

    Menu Tree 2-19 Menu Tre e Front P age O nline/Of f line Medi a & Ink Sta tu s Adv ance Media Me nu AutoSet Pr i m e B a r s Pr i n t M o d e Ca rriage Pr i m e Medi a Unloa d Medi a Loa d Calibrate Pr inter Manual Calibrat ions Medi a Feed Manual Bidi Registration Manual Hea d Registration Manual Jet Map ping Jet St atus Lines Default Registrat ...

  • HP (Hewlett-Packard) 0706124 REV B - page 54

    2-20 Men u Tree Conf igure Pr inter P rin t er S e ttin gs To p G u t t e r s Side Gutters Ta k e u p D i r e c t i on Ta k e u p C o n t r o l Platen Vacuu m Con trol Hea d Height Space Betwee n P rints Right and Lef t Ma rgin Ser vic e Sta tion Dr ying Delay Units Expe r t/Novice M essage s Audibl e Alarm Select Pe n T emperatu re Ser vice Statio ...

  • HP (Hewlett-Packard) 0706124 REV B - page 55

    Menu Tree 2-21 Log Error Hist or y Ser vice Tests Control Panel T est Spit a nd Wipe Je ts Ta k eu p Tes t Pr i n t T e s t P rof iler T est Vacuum Fan T est Dr y e r T est P rint Image on Image Se nsor Horizontal Dot Accurac y Ver tic al Dot Accurac y Isolatio n P rint T est Pod T est Calibrat ions Hea d Height Medi a Se nsor White Point Home Head ...

  • HP (Hewlett-Packard) 0706124 REV B - page 56

    2-22 Men u Tree ...

  • HP (Hewlett-Packard) 0706124 REV B - page 57

    Instal ling Ink and Media 3-1 C HAPTER 3 Inst alling Ink and Media This ch apt er descri b es: ◆ Var iable Mode P rinting (page 3- 2) ◆ Ink System Over vie w (page 3 -4) ◆ Selecting a P rint Mode (page 3-7) ◆ Installing Ink for the F irst T ime in a Ne w P rinter (pag e 3-1 2 ) ◆ Replacing I nk System Components (page 3-1 7) ◆ Loa ding ...

  • HP (Hewlett-Packard) 0706124 REV B - page 58

    3-2 Var iable Mode Print ing Var ia ble M ode Pr int ing Th e printer us e s thes e techniques t o v ar y t h e qualit y of a print an d speed of prin t ing: ◆ Direc t ion — for faste st print speed, the printhea ds f ire ink bidirectionally , whe n the c arriage travels in both directions. T o reduce cer tain banding ef fects, the printhea ds ...

  • HP (Hewlett-Packard) 0706124 REV B - page 59

    Var iable Mode Pr int ing 3-3 Prin t speed is in creas ed by: ◆ Reducing the num ber of passe s (see “Selec ting a P rint Mode” on pag e 3-7) ◆ Reducing t he number of dif ferent col ors or using sm aller ink sets (four or six colors instead of eight or more) ◆ P rinting with t wo heads per color (see “Selecting a P rint Mode” on pag ...

  • HP (Hewlett-Packard) 0706124 REV B - page 60

    3-4 Ink System Over view Ink Syste m Over vie w Th e printer ’ s ink syst em consists of three m ain componen ts: ◆ Ink reser voir — a plastic box containing the ink sup ply and an electronic prof iler , which specif ies the ink t ype, color , and amount rem aining. The prof iler plugs in to a co nnector on the ink tray , allowing it to commu ...

  • HP (Hewlett-Packard) 0706124 REV B - page 61

    Ink System Over view 3-5 Th e ink system also in clu de s a la beling system to h el p k eep the compo n en ts of ea ch ink col or tog ethe r: ◆ Color Map Cards — lists all of the sup por ted ink sets, f its in plastic slee ve inside the printer’s top cover for easy refer en ce during installation and printing. ◆ Ink T ype Label — used to ...

  • HP (Hewlett-Packard) 0706124 REV B - page 62

    3-6 Ink System Over view Spare Ink and Pr int heads F or m ax im um pr odu ct ivit y and minimu m down t ime, ColorSpan rec ommen d s stoc king extra ink re s e rvoirs an d pr int- h e a ds. W h en the ink supp ly ru ns lo w , or a printh ead needs to be rep laced, having spares will ensure th a t pr int ing can resume as quickly as possi ble. Sin ...

  • HP (Hewlett-Packard) 0706124 REV B - page 63

    Select ing a Pr int Mod e 3-7 Select ing a Pr int Mode Be f ore in stal ling in k, repor t to the print er ho w you will us e th e ink y ou will install (th e “ print mode ” ). Th is is n ecessar y becau s e alth ough th e prin te r can det ect wh ich inks are in st all ed, a gi v en ink s et m ay be usa ble in s eve ral differen t mode s. F or ...

  • HP (Hewlett-Packard) 0706124 REV B - page 64

    3-8 Selec t ing a Pr int Mod e Th e control panel disp lays th e Select Color M ap screen. A t th e top o f this screen are the color s et s tha t are v a li d f or the number of hea ds p er color you sel ected. A t the bot tom o f th e s creen i s a s c h ema t ic diagram sh owing th e p lacem ent of th e printhea ds in the printh ea d car ria g e ...

  • HP (Hewlett-Packard) 0706124 REV B - page 65

    Select ing a Pr int Mod e 3-9 6. P ress the C a nd p ke ys to select the color map you will us e. Th e color m ap dia gram chang es with y our s el ect ion. 7. P ress D to continue. Th e con trol panel disp la ys th e Sel ect P ass e s m enu. 8. P ress the C a nd p keys to select the number of print passe s you w ant to us e. A high er number of pa ...

  • HP (Hewlett-Packard) 0706124 REV B - page 66

    3-1 0 Switching Between Ink Sets Switching Bet ween Ink Sets Th e inks ar e loca ted in specific n umbered loca t ions on th e printer f or opt imal print an d color qua lit y . The sof t w are ignores ink po sit io ns tha t are n ot need ed f or a pri nt m ode, s o an y ink (or no ink) can be p res e nt in th ese posit ions. This provi de s f le x ...

  • HP (Hewlett-Packard) 0706124 REV B - page 67

    Switching Bet w een Ink Sets 3-1 1 Switc hing be t w e en eig ht-color and six-color modes, ho wev er , d oes requ ire swit ching ink(s) : Caut ion Whe n changing ink colors, if you change the print- hea d and reser voir without changing the ex isting ink tube, ink from the reser voir will mix with the dif fer- e nt i nk in t he ink tube, producing ...

  • HP (Hewlett-Packard) 0706124 REV B - page 68

    3-1 2 Instal ling Ink for t he Fir st T ime i n a New Pr inter Installin g Ink for t he First T ime i n a New Pr inter Wh en you rec eiv e a new pr int er , nu mbered empt y ink t u b es are pre instal led a t th e fa ctory . This p rep ares th e prin ter to a ccep t ink res e rvoi rs an d prin th ea ds with an y ink t y pe or col or s et. It al so ...

  • HP (Hewlett-Packard) 0706124 REV B - page 69

    Instal ling Ink for t he Fi rst T ime i n a New Pr inter 3-1 3 5. If n ot pre-as sembled, ins er t the drain t ube into the conne c- tion on top o f the drain bot tle. 6. Pla c e th e d rai n b ot t le o n t he f l oo r an d t a pe th e dr ai n t ube to the dr ye r tube, provid ing a de scent fr om c arriage-le vel to the drain bot tle. Fig. 3 -7. ...

  • HP (Hewlett-Packard) 0706124 REV B - page 70

    3-1 4 Instal ling Ink for t he Fir st T ime i n a New Pr inter 7 . R e f e r r i n g t o t h e C o l o r M a p c a r d , p l a c e a n i n k r es e r v o i r i n t o i t s numbere d position (1 through 1 2) in the ink tray . Be sure to insert th e prof iler in to its port in th e ink t ray . W ork wit h th e ink res er v oir , t u be, an d print h ...

  • HP (Hewlett-Packard) 0706124 REV B - page 71

    Instal ling Ink for t he Fi rst T ime i n a New Pr inter 3-1 5 1 2. As soon as you s ee ink f lowing into the drain tube, pinch the dr ai n tu b e an d r em ov e i t f rom th e n oz zl e end o f t he in k t ub e. By pin ching the drain t u be, a v acuum is form ed bet w een t h e pin che d t u be an d the e n d of th e needle , ke eping an y resi d ...

  • HP (Hewlett-Packard) 0706124 REV B - page 72

    3-1 6 Instal ling Ink for t he Fir st T ime i n a New Pr inter Af ter ins talli ng one or more pr inth eads, alw a ys run A utoSet . See “ Fro nt P ag e ” o n pa g e 2-5 f or instru ct ions o n running A utoSet f rom th e Front P ag e s cre en. ...

  • HP (Hewlett-Packard) 0706124 REV B - page 73

    Replacin g Ink System Components 3-1 7 Replacing Ink System Components This s ect ion sh ows y ou h ow to re p la ce th e in divi dual c ompo- nents in th e ink system: ◆ Replacing an ink rese r v oir in an idle printer ◆ Replacing an ink re ser voir during printing (“hot sw a p ping”) ◆ Repl acin g a pr inthea d ◆ Replacing an ink tube ...

  • HP (Hewlett-Packard) 0706124 REV B - page 74

    3-1 8 Replacing Ink System Components Replacing an Ink Reser voir Dur i ng Pr int ing ( “ Ho t Swapping ” ) Y ou can re p la ce an ink res er v oir duri ng printing ( “ ho t s wap ” ) o nly with an ink r es er v oir of th e sam e color a n d ink t y pe. Caution When switching to a dif fere nt ink color or ink t ype, wait for pri nting to fi ...

  • HP (Hewlett-Packard) 0706124 REV B - page 75

    Replacin g Ink System Components 3-1 9 Replacing a Pr int head Rep lace a printhea d w hen th e pri nt er: ◆ Whe n the printer can no longer comp e nsate for missing or def lected jets by increasing the number of p rint pass es, and you cannot recover the se jets (see “Clean ing Ink Jets” on page 5 -3 for i nstruct ions) . ◆ When the number ...

  • HP (Hewlett-Packard) 0706124 REV B - page 76

    3-20 Replac ing Ink System Compon ents Replacing An Ink T ube Re pl ac e a n i n k t ub e whe n s w i t c h i n g i n k c ol o r s o r t y p e s , o r i f t he ink t u be l eaks. Y ou need not rep lace an ink t u be wh en you chang e an ink re s er vo ir an d/or prin th ea d wi t ho ut changing ink color or t y pe, if the t u be is f unct ioning no ...

  • HP (Hewlett-Packard) 0706124 REV B - page 77

    Replacin g Ink System Components 3-2 1 1. Wait for the print er to stop printing. 2. From the rea d y scree n, press the O nline/O f f line button . Th e Fro nt P a g e s creen appear s. 3. P ress the Ca rriage button. Th e printhea d car riag e mo ves ou t of the s er vi ce stat ion. 4. Open the printer top cover . 5. Disconne ct the ink tube you ...

  • HP (Hewlett-Packard) 0706124 REV B - page 78

    3-2 2 Replacing Ink System Components t u bes through th e gui de behin d th e carria ge top cov er f or printhea ds 1, 2 , and 3. Caution Ensure that the ink tubes will not be pinched or s ev- ered whe n the top cover is clos ed. 1 1. Connect the ne w ink tube to the ink res er voir . Ink tray T ube guides along rea r of printer T ube guides insid ...

  • HP (Hewlett-Packard) 0706124 REV B - page 79

    Replacin g Ink System Components 3-2 3 Caut ion Alw ays f ill an empt y ink tube wit h ink before con- necting it to a printhea d. Attempting to p rint with an empt y ink tube connected to a printhead will re su lt in e nough air to be introdu ced to c aus e the print- head to fail. This condition ma y be reco verable by purging the c ar tridge of ...

  • HP (Hewlett-Packard) 0706124 REV B - page 80

    3-2 4 L oading Med ia L oading Media W ear cot ton glov es durin g this pro cedure, or h an dl e the m e dia o nly by it s very outsi de edg es. This wi ll prev en t skin oils from being dep osit ed on th e medi a, w hich could ren der out put qual- it y u na ccepta bl e. Ti p For best re sults, us e ge nuine ColorSpan media. Caution D o n o t s to ...

  • HP (Hewlett-Packard) 0706124 REV B - page 81

    Lo a di n g M e d ia 3-2 5 4. Load and s ecure th e other collet against e nd of media roll. Th e far -si de coll et doe s n ot ha ve a metal pin. Push th e coll et int o th e core , an d frict ion wi ll h old it in p la ce. 5. From the rea r of the prin ter , load the media and spool into the printer’s sup ply spool hold er . Press th e hom e si ...

  • HP (Hewlett-Packard) 0706124 REV B - page 82

    3-2 6 L oading Med ia 9. O n the Fr on t Pa ge s cr een o f th e c on tro l pa ne l, pr ess th e L oad Media ke y . Th e con trol panel prompt s you to press th e B key t o lo ad me di a , o r n to can cel. 10 . P r e s s t h e B key to pro ceed. Th e cont rol p anel prom pt s you to a dv a n ce th e media. 11 . P r e s s t h e p ke y to a dvance t ...

  • HP (Hewlett-Packard) 0706124 REV B - page 83

    Lo a di n g M e d ia 3- 2 7 1 4 . The control panel as ks whether you w ant to us e the takeup system. See “ Ta k e u p O p t i o n s ” on p ag e 3 - 30 fo r d et ail s on us in g the tak eup system. ◆ If you will be printing without using the takeup system, or if you will be per forming a Media Feed Calibration, press the n ke y to skip loa ...

  • HP (Hewlett-Packard) 0706124 REV B - page 84

    3-2 8 L oa ding Media Ti p The media should be consistently te nsioned across its width when attac hed to the takeup spo ol. Ensure t h a t t h e we b i s s t r a i g h t a n d s m o o t h f r o m s i d e t o s i d e . If necessa r y , a c ardboard core from a ro ll of masking or other graphic arts t ape c an be slip ped ov er the spool holder to h ...

  • HP (Hewlett-Packard) 0706124 REV B - page 85

    Lo a di n g M e d ia 3-2 9 L oading 7 2-Inch Media Th e wi dth of th e 7 2-in ch m edia m ak es it impossi bl e f or m ost perso ns to l oa d it by grasping its l ef t an d right ed g es a t th e sam e t ime. F o llo w this pro cedure t o more easily loa d 7 2-inch wi de me di a. W ear cot ton glov es during th is proced ure, or han dle th e media ...

  • HP (Hewlett-Packard) 0706124 REV B - page 86

    3-30 Loa ding Media Takeup Opt ions Y ou can enabl e and disa bl e the tak eu p system a t th e c on t rol panel. See T akeup Control under “ Print Set ti ngs ” on p ag e 2 -1 1 fo r d e t ai l s . ◆ When enab led, before each print job the takeup system automatic ally detects whether any media is at tached to the takeup spo ol and operates t ...

  • HP (Hewlett-Packard) 0706124 REV B - page 87

    Lo a di n g M e d ia 3-3 1 Dr y er Operat ion As th e prin ted out put a dv an ces past th e dr y er outl ets, th e dr ye r blo ws air o ver th e out put to dry it. Th e prin t will co ntinue to a d v ance un t il th e tr ailing edge of th e pr int has pass ed under th e dr y er . Th e print rem ains stationar y f or t w e n t y s econ ds, th en wi ...

  • HP (Hewlett-Packard) 0706124 REV B - page 88

    3-3 2 Cut t ing and Unloading Media Cut t ing and Unloading Media 1. P ress th e p key on the Front Page scree n to advance the printed por tion of the media past the cut ter anvil (on the front edge of the pl ate n ). 2. Fr om th e fr on t o f t he p rin te r, pla ce a u ti lit y kn ife bl ade i n t he cutter channel and draw the cutter acros s th ...

  • HP (Hewlett-Packard) 0706124 REV B - page 89

    Calibrat ing t he Pr inter 4-1 C HAPTER 4 Calibrat ing t he Pr inter This chap ter ex p lains h ow to cali bra t e th e print er fo r th e best possi ble out put: ◆ AutoSet (page 4 -2) ◆ Manual Calibrations (page 4-3) — Media Feed, Manual BiDi Registra- tion, Manual Hea d Registration, Manual Jet Map ping, Jet St atus Lines, Default Registrat ...

  • HP (Hewlett-Packard) 0706124 REV B - page 90

    4-2 AutoS et AutoSet Au t o S e t i s a n ad va nc e d p r i n t e r c a li b r at i o n f eat u r e th at u se s a n on board di gital im a ging s ensor an d sop hist ica t ed sof t w are to det ect an d compensa te f or v aria t ions in ink jet prin t ing. It can be initia ted by th e us er or run au tom a t ic ally a t spec ifi ed in t e r- v al ...

  • HP (Hewlett-Packard) 0706124 REV B - page 91

    Manual C alibrations 4-3 Manual Calibrat ions Wh en yo u run t he ca li bra t ions from th is m enu, yo u ev alua te t h e cali bra t io n te st pa t t erns visu ally an d ent er th e cali bra t ion v alues via the con t rol panel. In most cases, A utoSe t is more accurate an d shoul d be us ed instea d (s ee “ Au t o S e t ” on pa g e 4-2). No ...

  • HP (Hewlett-Packard) 0706124 REV B - page 92

    4-4 Manua l Calibra tions Media Feed Calibrat ion This cali bra t ion allo ws you to cal i bra te th e accura c y of th e m edia feed process. Y ou perf orm this cali bra t ion w h en loa ding m edia, or la te r if prin ts requirin g v ery a ccura te l ength (f or e x am- p le, out put tha t will be t iled) are foun d to be the wrong l e ngth. T o ...

  • HP (Hewlett-Packard) 0706124 REV B - page 93

    Manual C alibrations 4-5 ◆ Double Lines — alternate method for use when a refer- e n ce measuring stick is not available 8. Select one of the options and pre ss the E (Menu In) ke y to continue. 9. Follow the ap plic able p rocedure below . 3 4-I nch/1 2- inch Calibrat ion 1 0. P r ess the B ke y to continue. Th e prin te r asks w h e th er y o ...

  • HP (Hewlett-Packard) 0706124 REV B - page 94

    4-6 Manua l Calibra tions Double Lines Calibrat ion Us e this ca lib ra t ion if an a ccura te m easur ing st ick is n ot a v ail- able . Th e panel prom pt s you to s el e ct a pri nt h ea d to cali bra te. 1 6. Scro ll through the printhea d numbers to the pri nthea d you wan t to c alibrate, then pre ss the B ke y . A m enu appear s list ing th ...

  • HP (Hewlett-Packard) 0706124 REV B - page 95

    Manual C alibrations 4-7 Manual Bidirect ional Registrat ion Bi directiona l regi stra t ion is a m eth od to align ea ch of th e prin t- h ea ds so tha t dot p lacem ent is accurat e in both direct ions along th e X ax is (al ong th e direction of pr in t hea d tra ve l). Th e bidirect i onal registr a t i on pa t tern c onsists of a s eries of ve ...

  • HP (Hewlett-Packard) 0706124 REV B - page 96

    4-8 Manua l Calibra tions 10 . P r e s s B (P roceed ). Th e prin t er prin ts th e cali bra t ion pa t tern you s ele cted . 1 1. W he n the c alibration page has printed, the control panel dis- plays this prompt: Bidi regis tration Head 1: 0 1 2. Examine the BiDi R egistration pat tern for the current head, and determine which pattern is the clos ...

  • HP (Hewlett-Packard) 0706124 REV B - page 97

    Manual C alibrations 4-9 1 5. Repeat step s 1 2 through 1 4 for each of the t w elve hea ds. Wh en you hav e e nt e red regis tra t ion v alu es for all hea ds, the con trol panel disp l a ys this messa g e: Registr ation Succes sful ...

  • HP (Hewlett-Packard) 0706124 REV B - page 98

    4-10 M anual Cal ibrations Manual Head Registrat ion Th e print er cre a tes im a ges by firing dots of ink onto a sh eet of m edia. Pre cis e posit io ning of each d ot is ess ential f or optim al print qualit y . This i s possibl e only if you regi ster all printhea ds in th e printhea d assembly to each other in both the X (al ong the l ength of ...

  • HP (Hewlett-Packard) 0706124 REV B - page 99

    Manual C alibrations 4-11 If y ou need to print a ne w cali bra t ion pa t tern, pr ess B (P ro- ceed) . Th e print er prin ts a cali bra t ion pa ge . Wh en th e cali bra t io n pa g e has prin t e d, th e con trol panel disp lays this prompt: T ake readi ngs fr om lef t side of patt ern. 9. P ress the B ke y . Th e con t rol panel disp la ys this ...

  • HP (Hewlett-Packard) 0706124 REV B - page 100

    4-12 M anual Cal ibrations F or ex amp l e, if pa t tern +2 is th e clos est aligne d, press th e C k ey to c hange th e di sp lay to: X REG HEAD-1 +2 If a pri nth ead is extrem e ly out o f alignment, there m ay be no pa t tern i n alignment. Since th e bla c k vert ical b ar s are fiv e pix els apart, y ou can a dd +5 or -5 to a pa t tern nu mber ...

  • HP (Hewlett-Packard) 0706124 REV B - page 101

    Manual C alibrations 4-13 Manual Jet Mapping Ea ch of th e print h ea ds us ed by th e print er has 5 1 2 ink jet nozzl es (jets ). I f an y one of th es e jets is cl ogg ed or ha s a b a d el ectric al connect ion, pr int qualit y ma y be af fected. A certain numb er of no n-firi ng jets is wit hin the performan ce sp ecific a t ions of most prin ...

  • HP (Hewlett-Packard) 0706124 REV B - page 102

    4-14 M anual Cal ibrations If y ou hav e a cali bra t ion pa t te rn f rom a rec ent pr int, y ou can us e i t to cali brat e the h ea ds. Press n (Cancel) an d g o to th e next step. Oth erwi s e, p ress B . Th e print er prin ts a jet map t est pa t tern f or prin the a ds 1-6. ◆ If a line s egment is missing or broke n, the jet listed in th e ...

  • HP (Hewlett-Packard) 0706124 REV B - page 103

    Manual C alibrations 4-15 ◆ Clear all ba d jets — clears (ma rks as goo d) all jets cur- re ntly marked as unusable. Sel ect an op t ion an d foll ow th e correspo n ding procedu re bel ow . Repor t Individual Bad Jets Wh en you s ele ct R eport In divi dual Ba d J ets, t h e co nt rol panel di sp la ys th e fo llo wing pr omp t: Head 1: Press ...

  • HP (Hewlett-Packard) 0706124 REV B - page 104

    4-16 M anual Cal ibrations 1 3. W hen you are f inis hed rep or ting bad jet s, p ress n . Th e con trol pa nel disp lays t he pr evious m enu. Clear Individual Bad Jets Wh en you s elect Clear In divi dual Bad J et s, th e control panel disp la ys th e f ollo wing prom pt: Head 1: Press Proc eed to cl ear a bad j et. 14 . P r e s s C and p to sele ...

  • HP (Hewlett-Packard) 0706124 REV B - page 105

    Manual C alibrations 4-17 Th e control panel displa ys the previous menu. Clear All Bad Jets Wh en y ou s el ect Cl ear All Ba d J ets, th e co ntrol pane l dis- p lays th e follo wing p rompt: Are you s u re yo u want to clear ALL reported bad jets? ◆ P ress n to cancel this functio n, or ◆ P ress B (P ro ceed). The control panel d isplays thi ...

  • HP (Hewlett-Packard) 0706124 REV B - page 106

    4-18 M anual Cal ibrations Jet St atus Lines This opt ion prints a test pa t tern that sh ows w hich je ts are work- ing, and w hich jets ar e out. Zero Re gistrat ion Dat a This op t io n res ets all registra t io n da ta. Sin ce th ere is n o regi stra- t io n da ta af ter r unning this op t ion, all cali bra t ion v alues must be reesta blish ed ...

  • HP (Hewlett-Packard) 0706124 REV B - page 107

    Auto C alib rat ions 4-19 Auto Calibrat ions A utoSe t is a c on v eni ent “ one but ton ” act ion to au toma t ica lly run thr ee differen t cali bra t ions, but you can also r un ea ch one in divi dually , f rom th e A uto Cali bra t io ns m enu. T o e v aluat e th e calibra t i on t est patterns v isually and ent er th e calibration v a lues ...

  • HP (Hewlett-Packard) 0706124 REV B - page 108

    4-20 Au toTune AutoT une AutoT une ru ns A utoSet automa t i cally at int er v als you s pecif y . Wh en you use th e A u toT une sch ed uler to run A ut oSet, A ut oSet alw ays performs it s three calibra t ions w ithout prom p t ing the us er or c an celin g due to to o man y b ad jets. Y ou can use th e Quali t y Ch eck M ode fea t ure to han dl ...

  • HP (Hewlett-Packard) 0706124 REV B - page 109

    Calibration Summar y 4-21 Calibra t io n Summar y Th es e opt ions allow you to print a su mmary o f th e A u toSet cali- bra t ion, or transmit calibra t ion d a ta to a log file o n th e print se r v e r . ◆ AutoSet Summar y — whe n enabled, a tab le of the results of the AutoSet c alibration is printed af ter the AutoSet test pat terns: ◆ ...

  • HP (Hewlett-Packard) 0706124 REV B - page 110

    4-22 C alibr ation Su mmary Jets Unf ixed For each p rint pass mo de, shows t he number of unf ixed jets on each print- hea d. This numbe r should be z ero for all print heads. CP Codes Ca rriage and Pe n Check Code s, for trou- bleshooting by MacDermid Col orSpan T echnic al Sup por t. ...

  • HP (Hewlett-Packard) 0706124 REV B - page 111

    Lineari zation 4-23 Line ar izat ion As th e densit y o f an ima ge v a ri es f ro m highlights to shad ows, or f rom li ghter t ints to d ark er t in ts, t h e p rinter should a ccu ra tely reprod u ce thes e a reas in a pr edictable, or line ar , fashion. T h e process of line ariza t ion ( or col or cali bra t ion) in volv es pri nting an d rea ...

  • HP (Hewlett-Packard) 0706124 REV B - page 112

    4-24 Lin earization ...

  • HP (Hewlett-Packard) 0706124 REV B - page 113

    Maint aining t he P r inter 5-1 C HAPTER 5 Maintaining t h e Pr inter This chap ter des cri bes h ow to m ain tain th e prin ter: ◆ Mainte nance Schedule (page 5-2) ◆ Cleaning I nk Jets (page 5-3) ◆ Cleaning the Ser vice St ation (page 5-5) ◆ P rinting P r ime Ba rs (page 5-7) ◆ Manual P riming (page 5-8) ◆ Cleaning the T op Cover (pa g ...

  • HP (Hewlett-Packard) 0706124 REV B - page 114

    5-2 Mainten ance Schedule Maintenance Schedule Th e following t y pes of maint enance are re commen ded : ◆ Daily and “as needed” maintenance ◆ P rinting inter val w ar ning — the printer maintains a periodic mainte nance clock that tracks the total amount of time the printer has spe nt printing. Af ter the per iodic mainte nance inter va ...

  • HP (Hewlett-Packard) 0706124 REV B - page 115

    Cleaning Ink Jets 5-3 Cleanin g Ink Je ts Mainte nance in ter val : daily . Bef ore runni ng Au toSet, w h ich com pensa t es f or missi ng an d misf iring i nk jet s, y ou sho u ld cl ean th e jets as des cri bed in th e foll owing pa ra g rap h s to help k ee p th em clear of a c cumulat ed ink. Th e ef fec t iveness of the high-r esolut i on pri ...

  • HP (Hewlett-Packard) 0706124 REV B - page 116

    5-4 Cleaning Ink Jets 7. Clean the ser vice station as described in “Cleaning the Ser- vice Sta tion” on page 5-5. 8. O n t he co nt ro l p an el Fr on t P ag e sc re en, pres s t he B (P roceed) ke y to par k the printhea d c a rriage into the se r v ice station. Evaluat ing Pr int head Per formance Af ter Cleaning Th e J et St a t us L ines t ...

  • HP (Hewlett-Packard) 0706124 REV B - page 117

    Cleanin g t he Ser vice St at ion 5-5 Clean ing t he Ser vice Stat ion Maintenan ce inter val: dail y , and when swi tching b et ween dye and pigment inks . Cl eaning th e service sta t ion h elps to prev ent dri ed ink from clogging the ink jets. K e ep a rep lacemen t set of bo ots and wiper s on ha nd to rep lace d am a g ed or w orn boots an d ...

  • HP (Hewlett-Packard) 0706124 REV B - page 118

    5-6 Cle aning the Service Stat io n 5. Blot any remaining water from the ser v ice station with a clean, lint- free cloth. T o avoi d contami na t ing the ink, be s ure to dr y all w a ter f rom th e boots an d boot h olders. 6. Replace the s er vice s t ation into the pri nter . 7. Close the s er vice station acce ss door . 8. O n t he Fro nt Page ...

  • HP (Hewlett-Packard) 0706124 REV B - page 119

    Pr inting Pr ime Bars 5-7 Pr int ing Pr ime Bars Mainte nance in ter val : as neede d. T o k eep th e prin th ea d jets fi ring pr operly , you can pr in t soli d bl ocks of ink f rom e a ch prin th ea d. B y inspe ct ing th es e prim e ba r s fo r b l a n k ba nd s , yo u c a n a l s o do a qu i c k c he c k fo r no n f ir - ing an d def l ected j ...

  • HP (Hewlett-Packard) 0706124 REV B - page 120

    5-8 Manu al Pr iming Manual Pr iming Maintenance i nter val: as needed . If you disco ver tha t a n ex cess iv e num ber of jets are out on a pri nth ea d (after cl eani ng or pr in t in g th e prim e b ars or oth er tes t) , yo u c a n at tem pt t o r e cover je ts b y p er form i ng a ma nu al prim e. This pro cedure r equires a special primin g ...

  • HP (Hewlett-Packard) 0706124 REV B - page 121

    Manual Pr i ming 5-9 4. Depress and releas e the priming bulb to prime the printhea d. 5. O n the co ntrol panel, repor t how many primes you per- formed. 6. Repeat steps 3 and 4 for any other pri ntheads needing man- ual priming. 7. Clos e the ser vice station access d oor . 8. P ress the B ke y to retu rn the c arriage to the home position . ...

  • HP (Hewlett-Packard) 0706124 REV B - page 122

    5-1 0 Cleanin g t he Top Cover Cleaning t he Top Cover Maintenance i nter val: as needed . Th e printer ’ s top cov er is d esigned to protect you f r om the p ri nt he ad whe n i t i s mo vi n g ( i t m ove s ve r y fa s t d u ri n g p r in t i ng ) an d r edu ce noise, w hile provi ding a n uno b stru cted view of th e print area. Caref ul clea ...

  • HP (Hewlett-Packard) 0706124 REV B - page 123

    Purgin g t he Pr int heads 5-1 1 Purging t he Pr int heads Maintenan ce Inter val: as needed. Sin ce remo ving, purg ing, rep la cing, an d recali bra t ing a prin t- h ea d is a time -con suming pr ocess, purg e all prin th ea ds curren tly installed in th e carria ge in a singl e sessio n. T o p erform this proce ss, you wi ll need th e purge cli ...

  • HP (Hewlett-Packard) 0706124 REV B - page 124

    5-1 2 Purging the Pr int heads 1 0. Gentl y pre ss and ho ld the purge bulb until ink emerge s from the jet orif ice plate with no air bubble s. Be sure tha t the h ole on th e end of th e purge bulb is seal ed with your fin g e r as you press. Blot th e ink with a pa per tow el , but do not wi pe (w iping coul d clog t h e ink j ets). 1 1. Disconn ...

  • HP (Hewlett-Packard) 0706124 REV B - page 125

    Cleanin g t he En coder 5-1 3 Clean ing t he Encode r Mainte nance inte r val : at Mainte nance Cloc k Alarm . Th e en coder st rip all ows th e print er to precis ely l oca te t h e prin t- h ea d carr ia ge a cros s th e width of the p l a ten. If th e en code r becom es dirt y with paper dust or ink, th e prin ter cann ot prin t a ccura tely , a ...

  • HP (Hewlett-Packard) 0706124 REV B - page 126

    5-1 4 Cleani ng t he Ca rr iag e Rail Cleaning the Carr iage Rail Maintenance inter val: at Maintenance Clock Alarm. Th e carri ag e rail carri es th e prin th ea d carr ia g e a cross th e wi dth of th e p la te n. If dust or othe r part icl es accu mula te o n th e rail, th e ma terial could accumula te o n the carria g e wh ee ls (bearin gs) an ...

  • HP (Hewlett-Packard) 0706124 REV B - page 127

    Technic al Specif icat ion s A-1 A PPENDIX A Technical Specif icat ions This ch apt er lis ts the p rint er ’ s sp ecific a t ions an d i nform a t ion a b out or dering supp lie s. ...

  • HP (Hewlett-Packard) 0706124 REV B - page 128

    A-2 Specif ications Specif icat ions General Dimensio ns (Assembled) Depth: 3 1 inche s (78.7 c m) Height: 5 7.3 inches (1 45.5 c m) Width: 1 3 2 inches (3 3 5.3 cm), 7 2-inch model 1 20 inche s (3 04.8 cm), 6 0-inch model 1 0 2 inches (2 5 9.1 cm), 4 2-inch model Weight (Assembled) 7 2-inch model: 3 3 5 lbs (1 5 2 kg) 60-inc h model: 3 1 0 lbs (1 ...

  • HP (Hewlett-Packard) 0706124 REV B - page 129

    Specif ications A-3 Electr ical Pow er (cont i nued) Pr imar y Dr yer (o pt ional) ◆ Pow er used: 2 00-2 40 V AC, 1 6 Amps maxi- mum whe n operating, 5 0-60 Hz ◆ Required c ircuit: 200-2 40 V AC, 20 Amps, with NEMA L6-2 0R (United St ates and Japan) or CEE 7 /7 (Europ e) receptacle If you r build ing rece ives pow er fro m a sta ndard U.S . 208 ...

  • HP (Hewlett-Packard) 0706124 REV B - page 130

    A-4 Specif ications Performance Print Modes Suppor ted Ink and Media Consult M acDer mid Co lorS pan or y our M ac Dermi d ColorS pan repres enta t iv e for a n upda te d list ing of su pport ed ink an d me di a . Humidit y Compensat ion Slows printing in high-humidit y environme nts (within specific ations) to ensure complete dr y ing. Maximum Pri ...

  • HP (Hewlett-Packard) 0706124 REV B - page 131

    Supplies and Accessori es A-5 ...

  • HP (Hewlett-Packard) 0706124 REV B - page 132

    A-6 Supplies a nd Access ories ...

  • HP (Hewlett-Packard) 0706124 REV B - page 133

    Troubleshoot ing B-1 A PPENDIX B Troubleshoot ing This ap pen dix exp l ains ho w to prevent an d diagnos e print i ng probl ems an d prov ide s info rm a t ion a bout g et t ing h elp fr om Col orS pan. F or oth er sof t w a re-sp ecific trou ble sh oot ing procedure s, ref er to y our app li ca t ion sof t w are documenta t ion or the oth er C ol ...

  • HP (Hewlett-Packard) 0706124 REV B - page 134

    B-2 Trouble shooti ng Checkl ist Troubleshoot ing Checklis t Before you trou bl eshoot your print e r , m ak e sure that it is prop- erly inst alled as des cr i bed in Cha p ter 1, Get t ing Started. F ollo w th e st eps in thi s ch ecklist to isol at e an d reso lve p rin t ing pro ble ms. 1. Doe s the printer’s pow er come ON? YES: Go t o quest ...

  • HP (Hewlett-Packard) 0706124 REV B - page 135

    Troubleshooting Chec klist B-3 ◆ The c able bet w ee n your computer or net work and the pr i n t se r ve r m a y no t b e se c ur e l y c on n ec t e d a t b o t h end s . Refer to the print s er ver m a nual for more information. ◆ Y o ur computer may n ot be working prop erly . Run an ap plic ation that you know works correctly and p rint to ...

  • HP (Hewlett-Packard) 0706124 REV B - page 136

    B-4 Diagno stics Diagnost ic s Th e printer inclu d es a s eries of s e lf-diagnost ic tests d esigned t o h e lp Ma cDe rmi d Co lorS pan T e chni cal Ser v ices so lv e p rint er hardw ar e probl e ms. If one of th e tests en c ount e rs an erro r , and error messag e a ppears, w h ich inclu d es: ◆ Error code - alwa y s write down this code fo ...

  • HP (Hewlett-Packard) 0706124 REV B - page 137

    Diagnostic s B-5 T able B-1. Actions and Warnings Code, Messag e Cause Recover y (C A) Carr iage A-C A-1 - Ca rriage Rotation Se nsor Carriage is not locke d into printing positio n. R o t a t e t h e c a r r i a g e d o w n i n t o l o c k e d positio n. (IS) I nk Sensi ng A-IS-1through A-IS-1 2 - Module Out of Ink, Slot # n Ink re ser voir n is o ...

  • HP (Hewlett-Packard) 0706124 REV B - page 138

    B-6 Diagno stics W - MD-4 M edia Advance /Dri ve T o o Slo w Media a dvance motor is too slo w . Determ ine the cause of the drag on the m edia a dvance ser vo moto r . Lis - te n for unusual nois es coming from the grit roll sha f t which might indi- c ate sticking or binding. Advance the media with a sup ply loop in the media sup p ly to elimina ...

  • HP (Hewlett-Packard) 0706124 REV B - page 139

    Diagnostic s B-7 W -PC-3 - Hea d Height Changed - Rec alib rate Change in hea d height has invali- dated c a librati on. Run AutoSet (page 2-7 ). W -PC-4 - AutoJet - Jets Not Map ped Out Not all mis sing jets could b e replac ed. P rime/clean printhea ds (page 5-3), or inc reas e numb er of pa s s es (page 3-7). (PD) Pr im er Door A-PD-1 - Door Ope ...

  • HP (Hewlett-Packard) 0706124 REV B - page 140

    B-8 Diagno stics A-TU-2 - T akeup Stall The takeup motor ha s stalled. Check f or mechanical inter fere nce or binding, overloa ded spool, out of balanc e spool, or failur e in electron - ics or moto r . W -TU-1 - T akeup Nea rly Full The media takeup sp ool is alm ost full. Unloa d the t akeup spoo l and reload media (p age 3-2 4). W -TU-2 - T ake ...

  • HP (Hewlett-Packard) 0706124 REV B - page 141

    Bandin g B-9 Bandin g T h i s i s an ex pl an at ion o f t he v a rie t ies o f ba ndi n g t h at may o c c u r i n o u t pu t f r o m t he Di splay Ma ker Mac h 1 2 .T he n ame s a p plie d t o th e ban ding h e re are also an a t t empt to genera t e a co mmo n lan- g ua g e fo r des crib ing an d dis cussing t y pes of b an ding. St itch Banding ...

  • HP (Hewlett-Packard) 0706124 REV B - page 142

    B-10 Bandin g 3. Conf irm that the se r vice station algorithm under Menu - Conf i gure Pr inter - Pr inter Se t t ing s - Ser vice St at ion is set to 3 0 Second Spit & Wip e. Supply-L oop Banding Supp ly -loop b an ding resu lts f ro m calibra t ing th e p rint er wit h no supp ly loop pres ent, b ut prin t ing a ct ual jo bs wit h a sup p l ...

  • HP (Hewlett-Packard) 0706124 REV B - page 143

    Bandin g B-11 Texture Banding T e xt ure ban ding r esults f rom either une xpected changes in h ead h eight during pr int ing, or f ailure to re cali bra te after an i nt en- t ional hea d h ei ght change. An accura tely calibra ted engi ne w ill produ ce ran dom, equally distri bu te d con cen tra t io ns of d ots, r e ga rd les s o f t he i n te ...

  • HP (Hewlett-Packard) 0706124 REV B - page 144

    ...

  • HP (Hewlett-Packard) 0706124 REV B - page 145

    Index-1 Index ...

  • HP (Hewlett-Packard) 0706124 REV B - page 146

    Index-2 A Actions B- 5 Actions a nd warn ings 2-16 , B-5 Advance Media 2-7 ATTN (Attention) 2-8 Audible alarm 2-13 Auto Calibrations 2-1 0 AutoJet calibration 4-2 AutoSet calibration 1-21 , 2-7 , 4-2 quality check mode 4-20 AutoSet summary 4-21 AutoTune schedulin g 1-21 , 2-1 0 , 4-3 quality check mode 4-20 B Bidirectional r egistration 4-2 , 4-7 C ...

  • HP (Hewlett-Packard) 0706124 REV B - page 147

    Index-3 service tests 2-1 6 space between p rints 2-12 SS overspray delay 2-13 takeup direction 2- 11 units 2-1 2 user assistance 2- 3 user diagnostic s 2-16 vacuum c ontrol 2-11 warnings 2- 3 zero platen w idth 2-1 5 zero registration data 4-18 Cutting media 3-32 D Diagnostics B-4 Dryer 1-21 , 2- 13 , 3-31 Drying delay 2-12 E Electrica l requireme ...

  • HP (Hewlett-Packard) 0706124 REV B - page 148

    Index-4 J Jet replacemen t 3-2 Jet status lines 4- 18 , 5-4 L Linearization 1-21 , 4-23 Loading media 2-8 , 3- 24 Log erro r his tory 2-1 6 Lo g he ad r eg istr ati on dat a 4-2 1 Log jet data 4-2 1 M Manual calibration 2-1 0 Manual jet mapping 4- 13 Margi ns 2-1 2 Measure platen 2-15 Medi a cutti ng 3-32 loading 2-8 , 3-24 unloading 2-8 , 3-32 Med ...

  • HP (Hewlett-Packard) 0706124 REV B - page 149

    Index-5 R Ready scre en 2- 2 Regulatory st atements v Related manuals vii Relative humidity sensor 1-21 Reset All Defaults 2-15 Restore all defaults 2- 15 S Safety w arnings 1-4 , 1-5 , 1-9 , 1-13 Service printer 2-16 Service station 2-1 2 cleaning 5- 5 Service station spits 2-1 3 Service tests 2-16 Space between p rints 2-1 2 Spar e ink 3-6 Specif ...

  • HP (Hewlett-Packard) 0706124 REV B - page 150

    Index-6 ...

Manufacturer HP (Hewlett-Packard) Category Projection Television

Documents that we receive from a manufacturer of a HP (Hewlett-Packard) 0706124 REV B can be divided into several groups. They are, among others:
- HP (Hewlett-Packard) technical drawings
- 0706124 REV B manuals
- HP (Hewlett-Packard) product data sheets
- information booklets
- or energy labels HP (Hewlett-Packard) 0706124 REV B
All of them are important, but the most important information from the point of view of use of the device are in the user manual HP (Hewlett-Packard) 0706124 REV B.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals HP (Hewlett-Packard) 0706124 REV B, service manual, brief instructions and user manuals HP (Hewlett-Packard) 0706124 REV B. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product HP (Hewlett-Packard) 0706124 REV B.

A complete manual for the device HP (Hewlett-Packard) 0706124 REV B, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use HP (Hewlett-Packard) 0706124 REV B by users. Manuals are usually written by a technical writer, but in a language understandable to all users of HP (Hewlett-Packard) 0706124 REV B.

A complete HP (Hewlett-Packard) manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual HP (Hewlett-Packard) 0706124 REV B - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the HP (Hewlett-Packard) 0706124 REV B, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the HP (Hewlett-Packard) 0706124 REV B, that we can find in the current document
3. Tips how to use the basic functions of the device HP (Hewlett-Packard) 0706124 REV B - which should help us in our first steps of using HP (Hewlett-Packard) 0706124 REV B
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with HP (Hewlett-Packard) 0706124 REV B
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of HP (Hewlett-Packard) 0706124 REV B in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning HP (Hewlett-Packard) 0706124 REV B?

Use the form below

If you did not solve your problem by using a manual HP (Hewlett-Packard) 0706124 REV B, ask a question using the form below. If a user had a similar problem with HP (Hewlett-Packard) 0706124 REV B it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)