Manual Vulcan-Hart GDC60 ML-52584

16 pages 0.83 mb
Download

Go to site of 16

Summary
  • Vulcan-Hart GDC60 ML-52584 - page 1

    VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201-0696, TEL. (502) 778-2791 FORM 30501 (Rev. A, 11-95) GDC SERIES GAS DUPLEX COOKERS MODELS GDC24 ML-52581 GDC36 ML-52582 GDC48 ML-52583 GDC60 ML-52584 GDC72 ML-52585 INST ALLA TION & OPERA TION MANUAL MODEL GDC48 ...

  • Vulcan-Hart GDC60 ML-52584 - page 2

    — 2 — IMPORT ANT FOR YOUR SAFETY THIS MANUAL HAS BEEN PREPARED FOR PERSONNEL QUALIFIED TO INSTALL GAS EQUIPMENT, WHO SHOULD PERFORM THE INITIAL FIELD START-UP AND ADJUSTMENTS OF THE EQUIPMENT COVERED BY THIS MANUAL. POST IN A PROMINENT LOCATION THE INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE SMELL OF GAS IS DETECTED. THIS INFORMATION CAN BE OB ...

  • Vulcan-Hart GDC60 ML-52584 - page 3

    — 3 — Installation, Operation and Care of GDC SERIES GAS DUPLEX COOKERS KEEP THESE INSTRUCTIONS FOR FUTURE USE GENERAL The GDC Series Gas Duplex Cookers combine a high efficiency gas griddle with adjustable-height, thermostat-controlled electric platens to provide fast production of grilled foods. Vulcan Duplex Cookers are produced with quality ...

  • Vulcan-Hart GDC60 ML-52584 - page 4

    — 4 — INSTALLATION CODES AND STANDARDS The GDC Series Gas Duplex Cookers must be installed in accordance with: In the United States: 1. State and local codes. 2. National Fuel Gas Code ANSI Z223.1 (latest edition), available from American Gas Association, 1515 Wilson Blvd., Arlington, VA 22209. 3. National Electrical Code ANSI NFPA No. 70 (late ...

  • Vulcan-Hart GDC60 ML-52584 - page 5

    — 5 — Stand (Fig. 1) 1. Thread leg extension into fixed nut in griddle frame. 2. Thread adjustable leg through undershelf into leg extension. 3. Tighten both leg extension and adjustable legs. 4. If casters are furnished instead of adjustable legs, the locking swivel casters must be placed in the front. 5. To level the griddle plate, turn the a ...

  • Vulcan-Hart GDC60 ML-52584 - page 6

    — 6 — When test pressures are 1 / 2 psig (3.45 kPa) or less, the cooker must be isolated from the gas supply piping system by closing its individual shutoff valve. ELECTRICAL CONNECTIONS Make supply connections using insulated copper wire suitable for at least 90 ° C for the rated load. When initially selecting conduit size, keep in mind the p ...

  • Vulcan-Hart GDC60 ML-52584 - page 7

    — 7 — OPERA TION WARNING: THE DUPLEX COOKER AND ITS PARTS ARE HOT. BE CAREFUL WHEN OPERATING, CLEANING, AND SERVICING THE DUPLEX COOKER. CONTROLS (Fig. 2) Each griddle zone, one foot wide, and each platen has its own separate controls. Fig. 2 Main On-Off Switch — controls power to the pilot igniters. On-Off Switch with indicator light — con ...

  • Vulcan-Hart GDC60 ML-52584 - page 8

    — 8 — BEFORE FIRST USE The griddle plate is shipped with a protective coating. Remove this coating before cooking with griddle. Clean the griddle with a damp cloth and mild detergent. Rinse with a clean damp cloth and wipe dry. The griddle must be seasoned prior to first use. See the section titled SEASON GRIDDLE SURFACE for seasoning procedure ...

  • Vulcan-Hart GDC60 ML-52584 - page 9

    — 9 — PREHEAT GRIDDLE CAUTION: Care must be exercised not to overheat the griddle plate by setting the thermostats well above recommended temperatures. Overheating the plate may cause plate warpage, and will carbonize any grease on the plate and cause sticking. 1. Set thermostat to desired griddle temperature. Burners should light. 2. Allow 15- ...

  • Vulcan-Hart GDC60 ML-52584 - page 10

    — 10 — After Each Use Clean the griddle with a flexible spatula or griddle scraper. Take care not to contact the platen surfaces as these can be easily scratched, shortening the life of the coating and promoting sticking. During The Day Flush the hot griddle with water and scrape with griddle scraper to reduce carbonized grease build-up. Follow ...

  • Vulcan-Hart GDC60 ML-52584 - page 11

    — 11 — • DO NOT - Use grill cleaners on the platen. Life of the non-stick coating of the platen will vary depending upon the product cooked and the cooking temperature, but its life can be extended by frequent cleaning and by using care not to scratch the surface. When sticking of product eventually occurs and cannot be eliminated by thorough ...

  • Vulcan-Hart GDC60 ML-52584 - page 12

    — 12 — Tools required: 7 / 16 socket (magnetic) 1 / 4 drive 1 / 4 drive universal joint 1 / 4 drive 6" extension 1 / 4 drive ratchet 1. Remove platen cover (Fig. 3). 2. Remove all bolts from platen. Remove platen surface. (Fig. 4) Fig. 3 Fig. 4 3. Clean surface thoroughly. Make sure all foreign particles are removed from both surfaces (Fig ...

  • Vulcan-Hart GDC60 ML-52584 - page 13

    — 13 — 5. Tighten all bolts and nuts firmly (do not overtighten), with 7 / 16 wrench, in numerical order as shown in the diagram (Fig. 7). CAUTION: Overtightening can deform the aluminum material of the platen. The holes in the platen surface and the heads on the special bolts are eccentric. Make sure the head of each bolt fits into the hole in ...

  • Vulcan-Hart GDC60 ML-52584 - page 14

    — 14 — TROUBLESHOOTING PROBLEM Red light won't come on when main switch is on. Red light won't go off when Main On-Off or Thermostat switch is on. Cooker fails to heat when Thermostat On-Off switch is on. Igniter stays on too long after pilot flame is established. Igniter fails to light. Pilot does not light after igniter has been on ...

  • Vulcan-Hart GDC60 ML-52584 - page 15

    — 15 — PROBLEM Heat doesn't turn off; amber light is off; temperature is above thermostat setting. Heat doesn't turn off; amber light is on; temperature is above thermostat setting. Fat appears to smoke excessively. Food undercooked inside. Food tastes greasy or has objectional off-flavor. Noticeable build-up of gum on griddle. POSSIB ...

  • Vulcan-Hart GDC60 ML-52584 - page 16

    — 16 — FORM 30501 (Rev. A, 11-95) ...

Manufacturer Vulcan-Hart Category Cooktop

Documents that we receive from a manufacturer of a Vulcan-Hart GDC60 ML-52584 can be divided into several groups. They are, among others:
- Vulcan-Hart technical drawings
- GDC60 ML-52584 manuals
- Vulcan-Hart product data sheets
- information booklets
- or energy labels Vulcan-Hart GDC60 ML-52584
All of them are important, but the most important information from the point of view of use of the device are in the user manual Vulcan-Hart GDC60 ML-52584.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Vulcan-Hart GDC60 ML-52584, service manual, brief instructions and user manuals Vulcan-Hart GDC60 ML-52584. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Vulcan-Hart GDC60 ML-52584.

A complete manual for the device Vulcan-Hart GDC60 ML-52584, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Vulcan-Hart GDC60 ML-52584 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Vulcan-Hart GDC60 ML-52584.

A complete Vulcan-Hart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Vulcan-Hart GDC60 ML-52584 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Vulcan-Hart GDC60 ML-52584, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Vulcan-Hart GDC60 ML-52584, that we can find in the current document
3. Tips how to use the basic functions of the device Vulcan-Hart GDC60 ML-52584 - which should help us in our first steps of using Vulcan-Hart GDC60 ML-52584
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Vulcan-Hart GDC60 ML-52584
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Vulcan-Hart GDC60 ML-52584 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Vulcan-Hart GDC60 ML-52584?

Use the form below

If you did not solve your problem by using a manual Vulcan-Hart GDC60 ML-52584, ask a question using the form below. If a user had a similar problem with Vulcan-Hart GDC60 ML-52584 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)