English dropdown-ico

Manual Graco 218938

20 pages 0.65 mb
Download

Go to site of 20

Summary
  • Graco 218938 - page 1

    APPLICA TION EQUIPMENT FROM GRACO INSTRUCTIONS-P ARTS LIST 307–730 Rev G Supersedes E (and F , not published) 1/4 Gallon Per Minute, 120 V AC, 60 Hz PT2000  Pressure Roller System 250 psi (17.5 bar) MAXIMUM WORKING PRESSURE Model 218–938, Series B with 18 inch Extension and 1/2 and 3/4 inch nap Roller Covers Model 223–660, Series A Basic P ...

  • Graco 218938 - page 2

     307-730 CAUTION T o avoid premature wear of the pressure switch, never use more than 25 ft (7.6 m) of 1/4” ID outlet hose. When longer outlet hose is needed, use 3/8” ID hose at a maximum of 100 ft (30 m) long. Never use 1/4” ID and 3/8” ID hose together . Do not use lacquer or lacquer thinner in the suction and outlet hoses supplied wi ...

  • Graco 218938 - page 3

    3 307-730 A VERTISSEMENT Assurez–vous que tous les utilisateurs de cet équipment lisent, comprennent et observent les avertissements et les instructions de ce manuel! SECURITE GENERAL Faites extrêmement attention de ne pas éclabousser de peinture, d’eau de rinçage sale ni de solvant dans les yeux. Portez de lunettes de protection. Assurez-v ...

  • Graco 218938 - page 4

    4 307-730 ADVERTENCIA Asegurarse de que todos los operadores de este equipo lean, entiendan y repeten las precauciones e instrucciones indicadas en este manual. SEGURIDAD EN GENERAL T ener extremo cuidado de no salpicarse los ojos con pintura, agua de enjuague contaminada o solvente. Usar gafas protectoras. Asegurarse de que el lugar de trabajo ten ...

  • Graco 218938 - page 5

    5 307-730 PT2000 PRESSURE ROLLER SYSTEM DESCRIPTION SUCTION HOSE PRIMING TUBE INLET V AL VE MOTOR ON/OFF SWITCH POWER SUPPL Y CORD ROLLER V AL VE PRIMING V AL VE P AINT FIL TER 25 FT . (7.6 M) HOSE 18 INCH EXTENSION 9 INCH ROLLER FRAME ROLLER COVER 0285 Motor The motor drives the connecting rod which moves the diaphragm. Pressure Switch The pressur ...

  • Graco 218938 - page 6

    6 307-730 SETUP SUCTION HOSE PRIMING TUBE INLET V AL VE MOTOR ON/OFF SWITCH POWER SUPPL Y CORD ROLLER V AL VE PRIMING V AL VE P AINT FIL TER 25 FT . (7.6 M) HOSE 18 INCH EXTENSION 9 INCH ROLLER FRAME ROLLER COVER 0285 USE TWO WRENCHES T O TIGHTEN SPRING GUARD MUST BE A T ROLLER V AL VE INLET TRIGGER HAND TIGHTEN ONL Y TO A VOID CRACKING ROLLER COVE ...

  • Graco 218938 - page 7

    7 307-730 ST ARTUP Pressure Relief Procedure To reduce the risk of serious bodily injury , including injury from moving parts, or electric shock, always follow this procedure whenever you shut of f the sys - tem, when checking or servicing any part of the sys - tem and whenever you stop painting. 1. T urn the ON/OFF switch to OFF . 2. Unplug the po ...

  • Graco 218938 - page 8

    8 307-730 MAINTENANCE Thorough flushing and proper maintenance are essential to keep your system working properly . Improper flushing or maintenance may prevent the system from working the next time you need it, and may result in costly damage to the system. Always flush your system thoroughly and immediate - ly after each use. Always drain all wat ...

  • Graco 218938 - page 9

    9 307-730 Flushing Procedure (Oil-based Paint Only) NOTE: Follow the instructions on page 8, except use mineral spirits. DO NOT heat the mineral spirits. Installing and Removing a Roller Cover (See Fig 4.) 1. T o install a cover , hold the dif fuser and unscrew the retainer nut. Pull the dif fuser of f the frame. Slide the cover over the dif fuser ...

  • Graco 218938 - page 10

    10 307-730 TROUBLESHOOTING GUIDE Pressure Relief Procedure To reduce the risk of serious bodily injury , including injury from moving parts, or electric shock, always follow this procedure whenever you shut of f the sys - tem, when checking or servicing any part of the sys - tem and whenever you stop painting . 1. T urn the ON/OFF switch to OFF . 2 ...

  • Graco 218938 - page 11

    11 307-730 Roller V alve W ARNING Always follow the Pressure Relief Procedure W arning on page 10 before attempting any repair . NOTE: Order Repair Kit P/N 218–960 to repair this roller valve. 1. T ap out the pin (A) from the trigger (B) and slide the trigger of f of the valve (N). See Fig 6 . 2. Remove the cap (C). Use a 1/2 in. socket wrench to ...

  • Graco 218938 - page 12

    12 307-730 Pressure Relief Procedure To reduce the risk of serious bodily injury , including injury from moving parts, or electric shock, always follow this procedure whenever you shut of f the sys - tem, when checking or servicing any part of the sys - tem and whenever you stop painting . 1. T urn the ON/OFF switch to OFF . 2. Unplug the power sup ...

  • Graco 218938 - page 13

    13 307-730 Pressure Switch (See Fig 1 1, 12 & 13 .) 1. Disconnect the pressure switch leads from the ON/ OFF switch and from the rectifier . See Fig 1 1. 2. Remove the front cover (23). See Fig 13 . 3. Unscrew the retainer (14) and remove the pressure switch (12) and o-ring (12a). See Fig 12 . 4. Grease and install a new o-ring (12a) in the pum ...

  • Graco 218938 - page 14

    14 307-730 Diaphragm (See Fig 14 .) CAUTION Replace the diaphragm whenever you remove the pump housing (9), or after each 100 hours of use, whichever comes first. During use, small grooves are formed in the diaphragm which cannot be re- aligned properly . Reusing a diaphragm may cause leaking, resulting in costly pump damage. 1. Remove the screws ( ...

  • Graco 218938 - page 15

    15 307-730 Connecting Rod and Bearing (See Fig 16 .) 1. Remove the front cover (23). Remove the screws (15). Carefully tip back the pump housing. Unscrew the diaphragm (17) and discard it. CAUTION Replace the diaphragm whenever you remove the pump housing (9), or after each 100 hours of use, whichever comes first. During use, small grooves are form ...

  • Graco 218938 - page 16

    16 307-730 P ARTS DRA WING Part of 10 page 17 LUBRICA TE, TORQUE T O 85 in–lb (9.6 N.m) SEE DET AIL A, page 17 PRESS FIT INT O 22 34 68 67 28 43 33 33 39 25 26 69 36 30 32 44 47 45 46 15 16 22 11 17 48 49 27 21 20 18 23 24 29 LABEL 96 LABEL 0301 52 54 LABEL 42 80 81 84 26 41 33 82 65 38 37 31 26 25 35 LABEL ...

  • Graco 218938 - page 17

    17 307-730 P ARTS DRA WING TORQUE T O 55–65 in–lb (6.2–7.4 N.m) 0788 0303 0244 94 62 or 89 63a 63a 63 93 60 64 12a 12 14 1 3 10 9 2f 2e 2d 2c 2b 2a 2 APPL Y SEALANT TO THREADS TORQUE T O 80–100 in–lb (13.5–16 N.m) TORQUE T O 280–300 in–lb (32–34 N.m) TORQUE T O 470–490 in–lb (33–35 N.m) APPL Y T APE TO THREADS 55e 55a 55b 55 ...

  • Graco 218938 - page 18

    18 307-730 P ARTS LIST Model 218–938, Series B Includes items 1–96 Model 223–660, Series A (Basic Unit) Includes items 1–54, 65–84, 96 Ref No. Part No. Description Qty 1 220–930 HOUSING, valve, inlet 1 2 218–977* OUTLET V AL VE KIT Includes items 2a–2f 1 2a 222–349 . FITTING, outlet 1 2b 180–454 . GASKET 1 2c 107–521 . SPRING ...

  • Graco 218938 - page 19

    19 307-730 ACCESSORIES Must be purchased separately . CAUTION T o avoid premature wear of the pressure switch, never use more than 25 ft. (7.6 m) of 1/4” ID outlet hose. When longer outlet hose is needed, use 3/8” ID hose at a maximum of 100 ft (30 m) long. Never use 1/4” ID and 3/8” ID hose together . Do not use lacquer or lacquer thinner ...

  • Graco 218938 - page 20

    20 307-730 TECHNICAL DA TA Maximum Operating Pressure 250 psi (17.5 bar) . . . . . Power Requirements 120 V AC, 60 Hz, . . . . . . . . . . . . . 1 Phase, 1.0 Amp Pump Output 1 gallon (3.8 liter) in 5 minutes . . . . . . . . . Power Supply Cord No. 16 A WG, 3 wire, . . . . . . . . . . . . 6’ (1.7 m) long W etted Parts Aluminum, Brass, V iton  , ...

Manufacturer Graco Category Power Roller

Documents that we receive from a manufacturer of a Graco 218938 can be divided into several groups. They are, among others:
- Graco technical drawings
- 218938 manuals
- Graco product data sheets
- information booklets
- or energy labels Graco 218938
All of them are important, but the most important information from the point of view of use of the device are in the user manual Graco 218938.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Graco 218938, service manual, brief instructions and user manuals Graco 218938. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Graco 218938.

Similar manuals

A complete manual for the device Graco 218938, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Graco 218938 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Graco 218938.

A complete Graco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Graco 218938 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Graco 218938, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Graco 218938, that we can find in the current document
3. Tips how to use the basic functions of the device Graco 218938 - which should help us in our first steps of using Graco 218938
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Graco 218938
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Graco 218938 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Graco 218938?

Use the form below

If you did not solve your problem by using a manual Graco 218938, ask a question using the form below. If a user had a similar problem with Graco 218938 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)