Manual Pioneer 516-S/-K

96 pages 4.42 mb
Download

Go to site of 96

Summary
  • Pioneer 516-S/-K - page 1

    SINTOAMPLIFICA TORE AUDIO/VIDEO MUL TICANALE Operating Instructions Istruzioni per l’uso Discover the benefits of registering your product online at www .pioneer .co.uk ( www .pioneer-eur .com ). VSX-416 -S/-K VSX-516 -S/-K AUDIO/VIDEO MUL TI-CHANNEL RECEIVER Registra il tuo prodotto su www .pioneer .it (o www .pioneer-eur .com ) e scopri subito ...

  • Pioneer 516-S/-K - page 2

    Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. D3-4-2-1-2-2_B_En IMPORT ANT : THE MOULDED PLUG This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. Should the fuse need to be replaced ...

  • Pioneer 516-S/-K - page 3

    VENTILA TION CAUTION When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 60 cm at top, 10 cm at rear , and 30 cm at each side). W ARNING Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it fr om overheating. ...

  • Pioneer 516-S/-K - page 4

    Contents 01 Before you start Checking what’s in the box . . . . . . . . . . . . . . . 5 Loading the batteries . . . . . . . . . . . . . . . . . . . 5 Operating range of remote control unit . . . . . . 5 Installing the receiver . . . . . . . . . . . . . . . . . . . 5 02 5 minute guide Introduction to home theater . . . . . . . . . . . . . 6 Listen ...

  • Pioneer 516-S/-K - page 5

    Before you start 01 5 En English Français Deutsch Nederlands Italiano Español Chapter 1: Before you start Checking what’s in the box Please check that you've received the following supplied accessories: • AM loop antenna • FM wire antenna • AA size IEC R6 dry cell batteries (to confirm system operation) x2 • Remote control • Setu ...

  • Pioneer 516-S/-K - page 6

    5 minute guide 02 6 En Chapter 2: 5 minute guide Introduction to home theater Home theater refers to the use of multiple audio tracks to create a surround sound effect, making you feel like you're in the middle of the action or concert. The surround sound you get from a home theater system depends not only on your speaker setup, but also on th ...

  • Pioneer 516-S/-K - page 7

    5 minute guide 02 7 En English Français Deutsch Nederlands Italiano Español Using the Quick Setup You can use the Quick Setup to get your system up and running with just a few button presses. The receiver automatically makes the necessary settings after you have selected your speaker setup, room size and listening position. • VSX-516 model only ...

  • Pioneer 516-S/-K - page 8

    Quick surround sound setup 03 8 En Chapter 3: Quick surround sound setup VSX-516 model only Automatically setting up for surround sound (MCACC) The Auto Multi-Channel Acoustic Calibration (MCACC) setup measures the acoustic characteristics of your listening area, taking into account ambient noise, speaker size and distance, and tests for both chann ...

  • Pioneer 516-S/-K - page 9

    Quick surround sound setup 03 9 En English Français Deutsch Nederlands Italiano Español If you see an ERR message in the display, there may be a problem with your mic or the speaker connections. Turn off the power, and check the problem indicated by the ERR message (see below), then try the auto surround setup again. • ERR MIC – Check microph ...

  • Pioneer 516-S/-K - page 10

    Connecting up 04 10 En Chapter 4: Connecting up Making cable connections Make sure not to bend the cables over the top of this unit (as shown in the illustration). If this happens, the magnetic field produced by the transformers in this unit may cause a humming noise from the speakers. Important • Before making or changing any connections, switch ...

  • Pioneer 516-S/-K - page 11

    Connecting up 04 11 En English Français Deutsch Nederlands Italiano Español Connecting a TV and DVD player This page shows you how to connect your DVD player and TV to the receiver. 1 Connect a coaxial digital audio output on your DVD player to the DIGITAL COAX 1 (DVD/LD) input on this receiver. Use a coaxial digital audio cable for the connectio ...

  • Pioneer 516-S/-K - page 12

    Connecting up 04 12 En Connecting the multichannel analog outputs For DVD Audio and SACD playback, your DVD player may have 5.1 channel analog outputs.In this case, you can connect them to the multi- channel inputs of the receiver as shown below. 1 Connecting a satellite receiver or other digital set-top box Satellite and cable receivers, and terre ...

  • Pioneer 516-S/-K - page 13

    Connecting up 04 13 En English Français Deutsch Nederlands Italiano Español Connecting other audio components The number and kind of connections depends on the kind of component you’re connecting. 1 Follow the steps below to connect a CD-R, MD, DAT, tape recorder or other audio component. 1 If your component has a digital output, connect this t ...

  • Pioneer 516-S/-K - page 14

    Connecting up 04 14 En Microsoft, Windows Media ® , and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. Connecting other video components This receiver has audio/video inputs and outputs suitable for connecting analog or digital video recorders, including VCRs, DVD- re ...

  • Pioneer 516-S/-K - page 15

    Connecting up 04 15 En English Français Deutsch Nederlands Italiano Español Connecting antennas Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, connect external antennas (see Using external antennas below). 1 Pull off the protective shields of both AM antenna wires. 2 Push open the tabs, ...

  • Pioneer 516-S/-K - page 16

    Connecting up 04 16 En Connecting the speakers A complete speaker setup is shown below, but everyone’s home setup will vary. Simply connect the speakers you have in the manner illustrated. The receiver will work with just two stereo speakers (the front speakers in the diagram) but using at least three speakers ( VSX-416 model ) / four speakers ( ...

  • Pioneer 516-S/-K - page 17

    Connecting up 04 17 En English Français Deutsch Nederlands Italiano Español VSX-416 model 1 Twist exposed wire strands together. 2 Push open the tabs and insert exposed wire. 3 Release the tabs. VSX-516 model 1 Twist exposed wire strands together. 2 Loosen terminal and insert exposed wire. 3 Tighten terminal. Speaker terminals Make sure that all ...

  • Pioneer 516-S/-K - page 18

    Connecting up 04 18 En Speaker placement diagrams The following illustrations show a 6.1 channel speaker setup. 1 3-D view of 6.1 channel speaker setup Overhead view of speaker setup Extra Power mode speaker setup VSX-416 model only – S ee Using the Advanced surround effects on page 26 to switch on the Extra Power mode ( EX POWER ). Note 1 VSX-41 ...

  • Pioneer 516-S/-K - page 19

    Controls and displays 05 19 En English Français Deutsch Nederlands Italiano Español Chapter 5: Controls and displays Front panel Illustration shows the VSX-516 model 1 Input select buttons Selects an input source. 2 Character display See Display on page 21. 3 MCACC indicator (VSX-516 model only) Lights when Acoustic Calibration EQ (page 27) is on ...

  • Pioneer 516-S/-K - page 20

    Controls and displays 05 20 En 8 ACOUSTIC EQ (VSX-516 model only) Press to select an Acoustic Calibration EQ setting (page 27). 9 VSB MODE (VSX-416 model only) Switches on Virtual surround back processing (page 28). 10 DIALOGUE ENHANCEMENT (VSX-416 model only) Use to make dialog stand out when watching TV or a movie (page 29). 11 USB terminal (VSX- ...

  • Pioneer 516-S/-K - page 21

    Controls and displays 05 21 En English Français Deutsch Nederlands Italiano Español Display Illustration shows the VSX-516 model 1 SIGNAL SELECT indicators Lights to indicate the type of input signal assigned for the current component: AUTO Lights when AUTO signal select is on. SB (VSX-516 model only) Depending on the source, this lights when a s ...

  • Pioneer 516-S/-K - page 22

    Controls and displays 05 22 En 10 Tuner indicators / MONO Lights when the mono mode is set using the MPX button. / STEREO Lights when a stereo FM broadcast is being received in auto stereo mode. / TUNED Lights when a broadcast is being received. 11 EON/RDS indicators EON – Lights when the EON mode is set, and flashes during an EON broadcast. The ...

  • Pioneer 516-S/-K - page 23

    Controls and displays 05 23 En English Français Deutsch Nederlands Italiano Español 1 RECEIVER  Switches the receiver between standby and on. 2 Listening mode buttons STANDARD Press for Standard decoding and to switch between 2 Pro Logic II and (VSX-516 model only) Neo:6 options (page 25). ADV.SURR Switches between the various surround modes ( ...

  • Pioneer 516-S/-K - page 24

    Controls and displays 05 24 En 10  / ENTER Use the arrow buttons when setting up your surround sound system (page 31). Also used for DVD menus. 11 RETURN Confirm and exit the current menu screen. ONE TOUCH COPY * Copies the currently playing title from DVD to HDD or vice-versa. 12 DVD/DVR control buttons Use these buttons to control a P ...

  • Pioneer 516-S/-K - page 25

    Listening to your system 06 25 En English Français Deutsch Nederlands Italiano Español Chapter 6: Listening to your system Important • Certain features explained in this section will not be possible depending on the source (for example, PCM 88.2 kHz / 96 kHz, DTS 96 kHz (24 bit) or WMA 9 Pro sources). Auto playback The simplest, most direct lis ...

  • Pioneer 516-S/-K - page 26

    Listening to your system 06 26 En • 2 PRO LOGIC – 4.1 channel surround sound • Neo:6 CINEMA – 6.1 channel sound, especially suited to movie sources • Neo:6 MUSIC 1 – 6.1 channel sound, espe- cially suited to music sources VSX-516 model only – With multichannel sources, if you have connected surround back speaker and have selected SB O ...

  • Pioneer 516-S/-K - page 27

    Listening to your system 06 27 En English Français Deutsch Nederlands Italiano Español 3 Press EFFECT/CH SEL again to adjust other settings . Listening in stereo When you select STEREO or DIRECT , you will hear the source through just the front left and right speakers (and possibly your subwoofer depending on your speaker settings). Dolby Digital ...

  • Pioneer 516-S/-K - page 28

    Listening to your system 06 28 En • F. ALIGN – All speakers are heard in accordance with the front speaker settings. • CUSTOM 1/2 – Custom settings • EQ OFF – Switches Acoustic Calibration EQ off. The MCACC indicator on the front panel lights when Acoustic Calibration EQ is active. 1 Choosing the input signal • Default setting: AUTO Y ...

  • Pioneer 516-S/-K - page 29

    Listening to your system 06 29 En English Français Deutsch Nederlands Italiano Español with no surround back channel information, or if the material sounds better in the format (for example, 5.1) for which it was originally encoded, you can have the receiver only apply this effect to 6.1 encoded sources like Dolby Digital EX or DTS-ES. 1 VSX-516 ...

  • Pioneer 516-S/-K - page 30

    Listening to your system 06 30 En Using the tone controls Depending on what you are listening to, you may want to adjust the bass or treble using the front panel tone control. 1 Press TONE to select the frequency you want to adjust. Press to switch between BASS and TREBLE . 2 Use the MULTI JOG dial to change the amount of bass or treble as necessar ...

  • Pioneer 516-S/-K - page 31

    The System Setup menu 07 31 En English Français Deutsch Nederlands Italiano Español Chapter 7: The System Setup menu Using the System Setup menu The following section shows you how to make detailed settings to specify how you’re using the receiver. It also explains how to fine-tune individual speaker system settings. 1 Press RECEIVER on the rem ...

  • Pioneer 516-S/-K - page 32

    The System Setup menu 07 32 En • SP DISTN. – Make precise delay settings for your speaker system (see Fine Channel Distance below). The last five settings are specifically for customizing the parameters explained in Acoustic Calibration EQ on page 33: • EQ A. SET – Measure the acoustic characteristics of your room and automatically adjust t ...

  • Pioneer 516-S/-K - page 33

    The System Setup menu 07 33 En English Français Deutsch Nederlands Italiano Español Try to make the two tones sound as if they are arriving simultaneously at a position slightly in front of you and between your arm span. When it sounds like the delay settings are matched up, press  (cursor down) to confirm and continue to the next channel. • ...

  • Pioneer 516-S/-K - page 34

    The System Setup menu 07 34 En 2 Use / to select C1 or C2 then use the / buttons to select the setting you want to copy. • You can also copy from one custom setting to another. For more on the A. CH and F.ALG settings, see Setting the Acoustic Calibration EQ automatically above. 3 Use / to select ‘COPY? YES’ to copy and conf ...

  • Pioneer 516-S/-K - page 35

    The System Setup menu 07 35 En English Français Deutsch Nederlands Italiano Español 3 Use / to select the channel you want, using / to check the settings. The MCACC channel EQ indicators in the front panel display will light accordingly. 4 When you're finished, press RETURN. You will return to the Manual MCACC setup menu. Manual ...

  • Pioneer 516-S/-K - page 36

    The System Setup menu 07 36 En come out the front and center speakers are also routed to the subwoofer). 1 If you did not connect a subwoofer choose NO (the bass is output from other speakers). Crossover network • Default setting: 100Hz This setting decides the cutoff between bass sounds playing back from the speakers selected as LARGE , or the s ...

  • Pioneer 516-S/-K - page 37

    The System Setup menu 07 37 En English Français Deutsch Nederlands Italiano Español You only need to do this if you didn’t connect your digital components according to the defaults above. This tells the receiver what component is connected to which terminal so it corresponds to the buttons on the remote. 1 Select ‘IN ASSIG.’ from the System ...

  • Pioneer 516-S/-K - page 38

    Using the tuner 08 38 En Chapter 8: Using the tuner Listening to the radio The following steps show you how to tune in to FM and AM radio broadcasts and memorize the frequency for recall later. 1 Press AM or FM to select the tuner band. 2 Tune to a station. There are three ways to do this: Automatic tuning – Press and hold TUNING +/– for about ...

  • Pioneer 516-S/-K - page 39

    Using the tuner 08 39 En English Français Deutsch Nederlands Italiano Español An introduction to RDS Radio Data System (RDS) is a system used by most FM radio stations to provide listeners with various kinds of information—the name of the station and the kind of show they’re broadcasting, for example. One feature of RDS is that you can search ...

  • Pioneer 516-S/-K - page 40

    Using the tuner 08 40 En 5 If you want to keep listening to the station, press ENTER within the 5 seconds. If you don’t press ENTER , searching resumes. If NO PTY is displayed it means the tuner couldn’t find that program type at the time of the search. 1 Using EON When EON (Enhanced Other Network information) is turned on, the receiver jumps t ...

  • Pioneer 516-S/-K - page 41

    Making recordings 09 41 En English Français Deutsch Nederlands Italiano Español Chapter 9: Making recordings Making an audio or a video recording You can make an audio or a video recording from the built-in tuner, or from an audio or video source connected to the receiver (such as a CD player or TV). Keep in mind you can’t make a digital record ...

  • Pioneer 516-S/-K - page 42

    USB playback 10 42 En Chapter 10: USB playback Using the USB interface VSX-516 model only It is possible to listen to two-channel audio 1 using the USB interface on the front of this receiver. Connect a USB mass storage device 2 as shown below. 1 Press USB ( SHIFT +CD). 2 Connect your USB device. The USB terminal is located on the front panel. 3 Pr ...

  • Pioneer 516-S/-K - page 43

    USB playback 10 43 En English Français Deutsch Nederlands Italiano Español • Select another input source (like DVD/CD ), then switch back to USB . • Use a dedicated AC adapter (supplied with the device) for USB power. If this doesn’t remedy the problem, it is likely your USB device is incompatible. Compressed audio compatibility Note that a ...

  • Pioneer 516-S/-K - page 44

    Additional information 11 44 En Chapter 11: Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliance ...

  • Pioneer 516-S/-K - page 45

    Additional information 11 45 En English Français Deutsch Nederlands Italiano Español No sound from surround back speaker . • Refer to Speaker setting on page 35 to check the surround back speaker settings. • Refer to Channel level on page 36 to check the speaker levels. • Refer to Using surround back channel processing on page 28 to make su ...

  • Pioneer 516-S/-K - page 46

    Additional information 11 46 En Resetting the main unit Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this. 1 Switch the receiver into standby. 2 While holding down the TONE button, press and hold the  STANDBY/ON button for about three seconds. 3 When you see RESET? appear in ...

  • Pioneer 516-S/-K - page 47

    Additional information 11 47 En English Français Deutsch Nederlands Italiano Español Video Section • Input (Sensitivity/Impedance) DVR/VCR, DVD/LD, TV/SAT . . . . . . . . 1 Vp-p/75 Ω • Output (Level/Impedance) DVR/VCR, MONITOR OUT . . . . . . . . . 1 Vp-p/75 Ω • Frequency response DVR/VCR, DVD/LD, TV/SAT  MONITOR . . . . . . 5 Hz to ...

  • Pioneer 516-S/-K - page 48

    Grazie per aver acquistato questo prodotto Pioneer . Leggere attentamente questo manuale di istruzioni per familiarizzarsi con l’uso dell’apparecchio. Conservare poi il manuale per ogni eventuale futuro riferimento. D O W N D O W N Il punto esclamativo in un triangolo equilatero serve ad avvisare l’utilizzatore della presenza di importanti is ...

  • Pioneer 516-S/-K - page 49

    K058_It Se si vuole eliminare questo prodotto, non gettarlo insieme ai rifiuti domestici. Esiste un sistema di raccolta differenziata in conformità alle leggi che richiedono appositi trattamenti, recupero e riciclo. I privati cittadini dei venticinque paesi membri dell’UE, di Svizzera e Norvegia, possono restituire senza alcun costo i loro prodo ...

  • Pioneer 516-S/-K - page 50

    Indice 01 Prima di cominciare Controllo dei contenuti della scatola . . . . . . . . 5 Installazione delle batterie . . . . . . . . . . . . . . . . 5 Gamma operativa del telecomando . . . . . . . . . 5 Installazione del ricevitore . . . . . . . . . . . . . . . . 5 02 Guida di 5 minuti Presentazione del sistema home theater . . . . . 6 Ascolto del su ...

  • Pioneer 516-S/-K - page 51

    5 It English Français Deutsch Nederlands Italiano Español Capitolo 1: Prima di cominciare Controllo dei contenuti della scatola Controllare che siano st ati inclusi i seguenti accessori in dotazione: • Antenna AM a telaio • Antenna FM a filo • Pile a secco AA IEC R6 (per verificare il funzionamento del sistema) x2 •T e l e c o m a n d o ? ...

  • Pioneer 516-S/-K - page 52

    6 It Capitolo 2: Guida di 5 minuti Presentazione del sistema home theater Home theater riguarda l’uso di piste audio multiple per creare un effetto sonoro surround, per farvi sentire al centro dell’azione o di un concerto. Il suono surrou nd che si ottiene da un sistema home theater non dipende solo dalla configurazione degl i altoparlanti in u ...

  • Pioneer 516-S/-K - page 53

    7 It English Français Deutsch Nederlands Italiano Español Uso della Configurazione rapida È possibile usare la Configurazione rapida per fare funzionare rapida mente il sistema solo premendo qualche pulsante. Il ricevitore effettua le opportune im postazioni dopo aver selezionato la configurazione degli altoparlanti, la dimensione della stanza e ...

  • Pioneer 516-S/-K - page 54

    8 It Capitolo 3: Impostazione rapida suono surround Solo per il modello VSX-516 Impostazione automatica del suono surround (MCACC) L’impostazione del sistema automatico di calibratura acustica multicanale (MCACC) misura le caratteristiche acustiche dell’area di ascolto, prendendo in co nsiderazione il rumore ambientale, la dimensione e la dista ...

  • Pioneer 516-S/-K - page 55

    9 It English Français Deutsch Nederlands Italiano Español Se si vede un messaggio ERR sul display, può esservi un problema legato al microfono o ai collegamenti degli altoparlanti. Togliere l’alimentazione e controllare il problema indicato dal messaggio ERR (vedere sotto), quindi riprovare l’impostazione automatica del surround. • ERR MIC ...

  • Pioneer 516-S/-K - page 56

    10 It Capitolo 4: Collegamento Come collegare i cavi Assicurarsi di non piegare i cavi sulla parte superiore di questa unità (come mostrato nell’illustrazione). Se ciò accade, il campo magnetico prodotto dai trasformatori in questa unità può provocare un ronzio dagli altoparlanti. Importante • Prima di effettuare o modificare i collegamenti ...

  • Pioneer 516-S/-K - page 57

    11 It English Français Deutsch Nederlands Italiano Español Collegamento di un lettore DVD e di un televisore Questa pagina mostra co me collegare il lettore DVD e il televisore al ricevitore. 1 Collegare un’uscit a audio digitale coassiale sul lettore DVD all’ingresso DIGITAL COAX 1 (DVD/LD) sul ricevitore. Usare un cavo audio digitale coassi ...

  • Pioneer 516-S/-K - page 58

    12 It Collegamento delle uscite analogiche multicanale Per la riproduzione DVD Audio e SACD, il lettore DVD potrebbe avere uscite analogiche a 5.1 canali. In questo caso, è possibile collegarle agli ingressi multicanale del ricevitore, come sotto mostrato. 1 Collegamento di ricevitori satellitari o di altri set-top digitali I ricevitori satellitar ...

  • Pioneer 516-S/-K - page 59

    13 It English Français Deutsch Nederlands Italiano Español Collegamento di altri componenti audio Il numero e il tipo di collegamenti dipende dal tipo di componente che si sta collegando. 1 Seguire le fasi successive per collegare un CD- R, un MD, un DAT, una piastra a cassette o altri componenti audio. 1 Se il componente dispone di un’uscita d ...

  • Pioneer 516-S/-K - page 60

    14 It Microsoft, Windows Media ® e il logo Windows sono marchi commerciali o marchi commerci ali registrati di Microsoft Corporation negli Stati Uniti e/o altri Paesi. Collegamento di altri componenti video Questo ricevitore ha in gressi e uscite audio/ video adatti alla connessione di apparecchi di registrazione video analogici o digitali, inclus ...

  • Pioneer 516-S/-K - page 61

    15 It English Français Deutsch Nederlands Italiano Español Collegamento delle antenne Collegare l’antenna AM a telaio e l’antenna FM a filo come segue. Per migliorare la ricezione e la qualità sonora, collegare le antenne esterne (vedi Uso delle antenne esterne qui sotto). 1 Rimuovere gli schermi protettivi da entrambe le antenne AM a filo. ...

  • Pioneer 516-S/-K - page 62

    16 It Collegamento degli altoparlanti Di seguito è visualizzata una configurazione di altoparlanti completa, tuttavia si possono avere impostazioni differenti. Collegare semplicemente gli altoparlanti nel modo illustrato. Il ricevitore funziona anche con due soli diffusori stereo (i diffu sori frontali presenti nello schema); si consiglia tuttavia ...

  • Pioneer 516-S/-K - page 63

    17 It English Français Deutsch Nederlands Italiano Español Modello VSX-416 1 Attorcigliare la parte scoperta dei cavi. 2 Premere le linguette per aprirle e inserire la parte scoperta del cavo. 3 Rilasciare le linguette. Modello VSX-516 1 Attorcigliare i trefoli esposti. 2 Allentare il terminale e inserire il filo esposto. 3 Serrare il terminale. ...

  • Pioneer 516-S/-K - page 64

    18 It Diagrammi di posizionamento degli altoparlanti Le illustrazioni che seguono mostrano una configurazione altoparlanti a 6.1 canali. 1 Vista 3-D dell’impostazione dell’altoparlante 6,1 canali Vista generale dell’impostazione dell’altoparlante Configurazione altoparlanti in modalità Extra Power Solo per il modello VSX-416 – V edere Us ...

  • Pioneer 516-S/-K - page 65

    19 It English Français Deutsch Nederlands Italiano Español Capitolo 5: Controlli e display Pannello anteriore L’illustrazione mostra il modello VSX-516 1 Tasti di selezione dell’ingresso Consente di selezionare una sorgente di ingresso. 2 Display dei caratteri Vedi a Display a pagina 21. 3 Indicatore MCACC (Solo per il modello VSX- 516) Si il ...

  • Pioneer 516-S/-K - page 66

    20 It 8 ACOUSTIC EQ (Solo per il modello VSX-516) Premere questo per selezionare un’impostazione EQ della calibratura acustica (pagina 27). 9 VSB MODE (Solo per il modello VSX-416) Consente di passare alla modalità di elaborazione posteriore Virtual surround (pagina 28). 10 DIALOGUE ENHANCEMENT (Solo per il modello VSX-416) Usato per dar rilievo ...

  • Pioneer 516-S/-K - page 67

    21 It English Français Deutsch Nederlands Italiano Español Display L’illustrazione mostra il modello VSX-516 1S p i e SIGNAL SELECT Si illumina per indicare il tipo di segnale di ingresso assegnato al componente corrente: AUTO S’illumina quando è attiva la selezione di segnale AUTO . SB (Solo per il modello VSX-516) A seconda della fonte, s? ...

  • Pioneer 516-S/-K - page 68

    22 It 10 Spie del Sintonizzatore / MONO S’illumina quando si imposta modalità mono usando il tasto MPX . / STEREO S’illumina quando la trasmissione FM stereo è in fase di ricezione nella modalità stereo automatica. / TUNED S’illumina alla ricezione di una trasmissione. 11 Spia del dell’altoparlante EON – Si illumina quando è impostata ...

  • Pioneer 516-S/-K - page 69

    23 It English Français Deutsch Nederlands Italiano Español 1 RECEIVER  Commuta il ricevitore tra standby e on. 2T a s t i Listening mode STANDARD Premere questo tasto per la decodifica Standard e per usare alternativamente le opzioni 2 Pro Logic II e Neo:6 (Solo per il modello VSX-516) (pagina 25). ADV.SURR Consente di alternare le varie modal ...

  • Pioneer 516-S/-K - page 70

    24 It 10  / ENTER Usare i tasti freccia quando per la configurazione del sistema di suono surround (pagina 31). Si utilizza anche per i menu DVD. 11 RETURN Confermare e uscire dallo schermo di menu attuale. ONE TOUCH COPY* Consente di copiare il titolo in riproduzione da DVD ad HDD o viceversa. 12 Tasti di controllo DVD/DVR Usare questi ...

  • Pioneer 516-S/-K - page 71

    25 It English Français Deutsch Nederlands Italiano Español Capitolo 6: Ascolto del sistema Importante • Alcune funzioni spiegate in questa sezione non saranno possibili a seconda della fonte (ad esempio, PCM 88,2 kHz / 96 kHz, DTS 96 kHz (24 bit) o fonti WMA 9 Pro). Riproduzione automatica L’opzione di ascolto più semplice e diretta consiste ...

  • Pioneer 516-S/-K - page 72

    26 It • 2 PRO LOGIC – Suono surround a 4.1 canali • Neo:6 CINEMA – Suono a 6.1 canali, particolarmente adatto per i film • Neo:6 MUSIC 1 – Suono a 6.1 canali, particolarmente adatto per le fonti musicali Solo per il modello VSX-516 – Con le fonti multicanale, se si sono collegati gli altoparlanti posteriori surround e se è stato sele ...

  • Pioneer 516-S/-K - page 73

    27 It English Français Deutsch Nederlands Italiano Español 3 Premere EFFECT/CH SEL nuovamente per regolare le altre impostazioni. Ascolto stereo Alla selezione STEREO o DIRECT , sentirete la fonte solo attraverso gli altoparlanti anteriori di sinistra e destra (e possibilmente anche attraverso il subwoofer, secondo le impostazioni dell’altoparl ...

  • Pioneer 516-S/-K - page 74

    28 It • F. ALIGN – Tutti gli altoparlanti sono allineati in conformità con le impostazioni degli altoparlanti anteriori. • CUSTOM 1/2 – Impostazioni personalizzate • EQ OFF – Spegne la calibratura acustica EQ. L’indicatore MCACC s’illumina sul pannello anteriore quando è attivata la funzione Acoustic Calibration EQ. 1 Come sceglie ...

  • Pioneer 516-S/-K - page 75

    29 It English Français Deutsch Nederlands Italiano Español posteriore surround oppure - nel caso in cui il suono risulti migliore nel formato di codifica originale del materiale (ad esempio 5.1) - è possibile specificare al ricevitore che questo effetto sia applicato solo alle sorgenti con codifica 6.1, quali Dolby Digital EX o DTS-ES. 1 Solo pe ...

  • Pioneer 516-S/-K - page 76

    30 It Uso dei controlli del tono Secondo l’ascolto, può essere utile regolare i bassi o gli acuti usando il controllo del tono del pannello anteriore. 1 Premere TONE per selezionare la frequenza da regolare. Premere per commutare tra BASS e TREBLE . 2 Usare il controllo MULTI JOG per cambiare la quantità dei bassi o degli acuti se necessario. A ...

  • Pioneer 516-S/-K - page 77

    31 It English Français Deutsch Nederlands Italiano Español Capitolo 7: Menù System Setup Uso del menu System Setup La sezione che segue spiega come impostare in dettaglio i parametr i che consentono di specificare l’utilizzo del ricevitore. Viene inoltre descritta la regolazion e di precisione delle impostazioni di si stema per i singoli altop ...

  • Pioneer 516-S/-K - page 78

    32 It • SP DISTN. – Effettuare impostazioni di ritardo precise per il sistema dei diffusori (vedere Distanza ottimale dei diffusori sotto). Le ultime cinque impostazioni sono in modo specifico per personalizzare i parametri spiegati in Calibratura acustica EQ a pagina 33: • EQ A. SET – Misurare le caratteristiche acustiche dell’ambiente e ...

  • Pioneer 516-S/-K - page 79

    33 It English Français Deutsch Nederlands Italiano Español Cercare di far suonare i due toni come se arrivassero contempo raneamente ad una posizione leggermente davanti a voi tra le braccia. Quando sembra che le impostazioni di ritardo siano corrispondenti, premere l  (cursor giù) per confermare e continuare sul canale successivo. • Per co ...

  • Pioneer 516-S/-K - page 80

    34 It 2 Usare / per selezionare C1 o C2, quindi usare i tasti / per selezionare le impostazioni che si intendono copiare. • Si può anche copiare da un’impostazione personalizzata ad un’altra. Per ulteriori informazioni sulle impostazioni A. CH e F.ALG , vedere Impostazione automatica della funzione Acoustic Calibration EQ . 3 Usa ...

  • Pioneer 516-S/-K - page 81

    35 It English Français Deutsch Nederlands Italiano Español 3U s a r e / per selezionar e il canale desiderato, usando / per controllare le impostazioni. Le spie MCACC canale EQ sul display del pannello anteriore s’illuminano di conseguenza. 4 Al termine, premere RETURN. L’unità ritornerà al menù d’impostazione manuale MCACC. ...

  • Pioneer 516-S/-K - page 82

    36 It dagli altoparlanti anteriori e centrale sono inviate al subwoofer) 1 . Se non si è collegato un subwoofer, selezionare NO (i bassi vengono emessi dagli altri altoparlanti). Rete Crossover • Impostazione standard: 100Hz Quest’impostazione decide il taglio tra i suoni dei bassi riproducendo i toni da tutti gli altoparlanti selezionati come ...

  • Pioneer 516-S/-K - page 83

    37 It English Français Deutsch Nederlands Italiano Español Queste operazioni devono essere eseguite solo nel caso in cui i componen ti digitali non siano stati collegati secondo le impostazioni predefinite sopraindicate. Questi parametri indicano al ricevitore il componente collegato a un terminale specifico, in modo che corrisponda ai tasti del ...

  • Pioneer 516-S/-K - page 84

    38 It Capitolo 8: Come usare il sintonizzatore Ascolto della radio I seguenti punti spiegano come sintonizzare le stazioni radio FM e AM e come memorizzare le frequenze per poterle richiamare successivamente. 1 Premere AM o FM per selezionare la banda di sintonizzazione desiderata. 2 Sintonizzare una stazione. Ci sono tre modi per fare questo: Sint ...

  • Pioneer 516-S/-K - page 85

    39 It English Français Deutsch Nederlands Italiano Español Un’introduzione al sistema RDS Radio Data System (RDS) è un sistema usato da gran parte delle stazioni radio FM per fornire agli ascoltatori vari tipi di informazioni: ad esempio il nome della stazione e il tipo di spettacolo che stanno trasmettendo. Una funzione del RDS è la possibil ...

  • Pioneer 516-S/-K - page 86

    40 It 5 Se desiderate continuare ad ascoltare la stazione, premere ENTER entro 5 secondi. Se non premete ENTER , la ricerca continua. Se l’indicazione NO PTY appare sul display, ciò significa che il sintoniz zatore non è stato in grado di trovare il tipo del programma nel momento della ricerca. 1 Utilizzo della funzione EON Quando è attivata l ...

  • Pioneer 516-S/-K - page 87

    41 It English Français Deutsch Nederlands Italiano Español Capitolo 9: Come fare le registrazioni Come fare una registrazione audio o video E’ possibile fare una registrazione audio o video dal sintonizzato re incorporato o da un’altra fonte audio o video collegata al ricevitore (ad esempio un lettore CD o un televisore). Non dimenticare che ...

  • Pioneer 516-S/-K - page 88

    42 It Capitolo 10: Riproduzione USB Uso dell’interfaccia USB Solo per il modello VSX-516 È possibile ascoltare audio a due canali 1 mediante l’interfaccia USB presente sul lato frontale del ricevitore. Collegare un dispositivo di archiviazione di massa USB 2 come indicato di seguito. 1 P remere USB (SHIFT+CD). 2 Collegare il dispositivo USB. I ...

  • Pioneer 516-S/-K - page 89

    43 It English Français Deutsch Nederlands Italiano Español • Ricollegare il disp ositivo USB con il ricevitore spento. • Selezionare una sorgente di ingresso differente (ad esempio DVD/CD ), quindi selezionare nuovamente USB . • Usare un alimentato re CA dedicato (in dotazione con il dispositivo) per l’alimentazione USB. Se il problema pe ...

  • Pioneer 516-S/-K - page 90

    44 It Capitolo 11: Informazioni addizionali Localizzazione dei guasti Le operazioni errate sono spesso interpretate come problemi o ma lfunzionamenti. Se si sospetta qualche problema nel componente, si prega di controllare i punti qui sotto. A volte, il problema rimane in un altro componente. Es aminare gli altri componenti ed a pparecchi elettrici ...

  • Pioneer 516-S/-K - page 91

    45 It English Français Deutsch Nederlands Italiano Español Assenza di audio dagli altoparlanti surround posteriori. • F are riferimento a Impostazione degli altoparlanti a pagina 35 per controllare le impostazioni dell’altoparlante posteriore surround. • F are riferimento Livello del canale a pagina 36 per controllare i livelli dell’altop ...

  • Pioneer 516-S/-K - page 92

    46 It Ripristino dell’unità principale Usare questa procedura per azzerare tutte le impostazioni del ricevitore ai valori di fabbrica. Usare i controlli sul pannello anteriore per effettuare questo. 1 Commutare il ricevitore nella modalità d’attesa. 2 Mantenendo premut o il tasto TONE, premere e mantenere premuto il tasto  STANDBY/ON per t ...

  • Pioneer 516-S/-K - page 93

    47 It English Français Deutsch Nederlands Italiano Español Sezione video • Ingresso (Sensibilità/Impedenza) DVR/VCR, DVD/LD, TV/SAT. . . . . . . . 1 Vp-p/75 Ω • Uscita (Livello/Impedenza) DVR/VCR, MONITOR OUT. . . . . . . . . 1 Vp-p/75 Ω • Risposta di frequenza DVR/VCR, DVD/LD, TV/SAT  MONITOR. . . . . . . 5 Hz a 7 MHz dB Rapporto s ...

  • Pioneer 516-S/-K - page 94

    48 It VSX_516_Italian.fm Page 48 Friday, January 6, 2006 2:46 PM ...

  • Pioneer 516-S/-K - page 95

    49 It English Français Deutsch Nederlands Italiano Español VSX_516_Italian.fm Page 49 Friday, January 6, 2006 2:46 PM ...

  • Pioneer 516-S/-K - page 96

    <05L00001> <XRE3121-A> P rinted in Published by P ioneer Corporation. Copyright © 2005 Pioneer Corporation . All rights reserved. PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CA ...

Manufacturer Pioneer Category Stereo Receiver

Documents that we receive from a manufacturer of a Pioneer 516-S/-K can be divided into several groups. They are, among others:
- Pioneer technical drawings
- 516-S/-K manuals
- Pioneer product data sheets
- information booklets
- or energy labels Pioneer 516-S/-K
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pioneer 516-S/-K.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pioneer 516-S/-K, service manual, brief instructions and user manuals Pioneer 516-S/-K. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pioneer 516-S/-K.

Similar manuals

A complete manual for the device Pioneer 516-S/-K, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pioneer 516-S/-K by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pioneer 516-S/-K.

A complete Pioneer manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pioneer 516-S/-K - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pioneer 516-S/-K, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pioneer 516-S/-K, that we can find in the current document
3. Tips how to use the basic functions of the device Pioneer 516-S/-K - which should help us in our first steps of using Pioneer 516-S/-K
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pioneer 516-S/-K
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pioneer 516-S/-K in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pioneer 516-S/-K?

Use the form below

If you did not solve your problem by using a manual Pioneer 516-S/-K, ask a question using the form below. If a user had a similar problem with Pioneer 516-S/-K it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)