English dropdown-ico

Manual NEC 2000 IVS

156 pages 1.25 mb
Download

Go to site of 156

Summary
  • NEC 2000 IVS - page 1

    ND-45504 (E ) ISSU E 2 PART OF STOCK # 151900 Circuit Card Manual DECEMBER, 19 97 NEC America, Inc. ® ...

  • NEC 2000 IVS - page 2

    LIA BILI TY D IS CLA IM ER NEC Am eri ca Inc. reserves the right to change t he s pecifications, functions, or features, at any time, without notice. NEC America Inc . has prepared this document for use by its em- ployees and customers . The i nform ation contained herein is the property of NEC Am erica Inc. and shall not be reproduced without prio ...

  • NEC 2000 IVS - page 3

    ADDENDUM -001 ADDENDU M-002 ADDENDUM-003 ADDENDUM-004 DA T E JUL Y , 19 98 DA TE OC TOBER, 1998 DA T E DA T E ADDENDUM -005 ADDENDUM-006 ADDENDUM-007 ADDE NDUM-008 DA T E DA TE DA TE DA T E NE AX 2 000 I V S Ci rc uit Ca rd M a nua l Adde nd um Re visi on Sh eet 1 /2 ND-45504 (E) ISSUE 2 PA G E N o . ADD . No. 001 002 003 0 04 005 00 6 007 00 8 i 2 ...

  • NEC 2000 IVS - page 4

    ADDENDUM -001 ADDENDU M-002 ADDENDUM-003 ADDENDUM-004 DA T E JUL Y , 19 98 DA T E OCT OBER, 19 98 DA T E DA T E ADDENDUM -005 ADDENDUM-006 ADDENDUM-007 ADDE NDUM-008 DA T E DA TE DA T E DA T E NE AX 2 000 I V S Ci rc uit Ca rd M a nua l Adde ndum Re visi on Sh eet 2 /2 ND-45504 (E) ISSUE 2 68- 1 2. 1 68- 2 2. 1 68- 3 2. 1 68- 4 2. 1 69 70 2. 1 71 2 ...

  • NEC 2000 IVS - page 5

    ND-45504 (E ) ISSU E 2 DECEMBER, 199 7 NEAX2000 IVS Cir cui t Card Manua l T ABLE OF CONTENTS Pa g e ND-45504 (E ) T ABLE O F CONTEN TS Add end um- 002 P age i OCT OBER, 1998 Re vision 2.2 LIS T OF F IGURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • NEC 2000 IVS - page 6

    T ABLE OF CONTENTS ND -45504 (E) P age ii Ad d e nd um - 001 Revision 2.1 JUL Y , 1998 Pa g e 3. LAMP I NDICATIO NS AND SWITCH SET TINGS O F APPL ICATI ON CIRCUIT CARDS . . . . . . . . . . . . . 52 PN- AP00- A ( AP00) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • NEC 2000 IVS - page 7

    LIST OF FIG URES Figu re Tit le Pa g e ND -45504 (E) LIST OF FIGURES Page iii Revision 2.0 3-1 Circuit Card Mounting Slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3-2 MP/F P Card Mounti ng Slo ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • NEC 2000 IVS - page 8

    LIST OF T ABLE S Ta b l e T i t l e Pa g e LIST OF T ABLES ND -45504 (E) Pa g e i v Re vision 2.0 2-1 Func tio nal Outli ne o f Co ntro l Ci rcui t Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2-2 Fu ncti onal O utli ne o f Ap plic at ion Ci rcui t Card s . . . . . . . . . . . . . . . . . . . ...

  • NEC 2000 IVS - page 9

    ND -45504 (E) CHAPTER 1 Pa g e 1 Revision 2.0 CHAPTER 1 INTR ODUCTION 1. PURP O SE For inst a l lers and maintena nce t echnicians of the NEAX2000 IVS (PBX), this m a nual expla ins the funct ional outline and in stallation co nditi ons of the c irc uit card s, and expl a ins the mea ning of each indi c ator lamp (LED) and the switc h settings on t ...

  • NEC 2000 IVS - page 10

    CHAPTER 1 ND -45504 (E) Pa g e 2 Re vision 2.0 This page is for your notes. ...

  • NEC 2000 IVS - page 11

    ND-45504 (E ) CHAPTER 2 Add e nd um - 002 P ag e 3 OCT OBER, 1998 Re vision 2.2 CHAPTER 2 FUNCTIONAL OUTLINE OF CIRCUIT CARDS This chapte r e xpla ins the functi onal outlin e of v ario us circuit c ards used in the NEAX2000 IVS. Expla na tions are gi ven in alphab etical order of the circ uit card names for each kind (Control, Applicat ion, and Li ...

  • NEC 2000 IVS - page 12

    CHAPTER 2 N D - 4 5504 ( E ) P a g e 4 A dd e n d um - 0 0 1 R e vision 2.1 JU L Y , 1998 2 . A P P LIC A T I O N CIRCUI T CARDS T a bl e 2 - 2 sh o w s t h e f un c t ion a l out l in e o f e ac h a ppl i c a t i on c i rc ui t c a r d. T ab l e 2- 1 F u nct i o n al O ut l i ne o f C o nt r o l C ircu i t C ard s ( C o n t i nu e d) CARD N A M E ...

  • NEC 2000 IVS - page 13

    ND -45504 (E) CHAPTER 2 Ad de ndu m -0 01 Pa ge 5 JULY, 1998 Revision 2.1 PN- CC01 ETH ER Ethern et Co ntrol ca rd. T h is ca r d is use d w it h th e PN - A P 0 1 card to ac co m m o d at e th e Et h er n et , tr a n s mi t- ting/re cei ving a sig na l of TCP/IP prot oc ol. 10 BAS E -T twis te d pair cabl e can be conne cted dire ct ly to this car ...

  • NEC 2000 IVS - page 14

    CHAPTER 2 ND -45504 (E) Pa g e 6 Re vision 2.0 3. LINE/TR UNK CIRCUI T CARDS Table 2-3 sho ws th e funct ional outl ine of eac h l ine/trunk c ircui t ca rd. T able 2-3 Fu nct i ona l Ou tli ne of Li ne / T ru nk C ircuit Ca rds CARD NAME FU N CTIONA L NAME FUNCTIONAL O UTLINE PN-2AMP A AMP 2-line Ampli f ier T runk card. This ca rd is equ ipped wi ...

  • NEC 2000 IVS - page 15

    ND -45504 (E) CHAPTER 2 Pa g e 7 Revision 2.0 PN - 4DLCA DLC 4-line Digital L ine Circui t card for D term Series E/Series III/Ele ctraPro/DSS Con- sole. [–27 V V ersion, 2-wire type , line l ength: max. 200 m (656 ft.)] This car d is equip ped wit h quic k diagnost ics to de te ct short line conditi ons and the normality (S ynchro nous/Asynchron ...

  • NEC 2000 IVS - page 16

    CHAPTER 2 ND -45504 (E) Pa g e 8 Re vision 2.0 PN-4LCJ LC 4-line Analo g Line Circuit car d for si ngle l ine te lephone s. This car d prov ides 4 ci rcu its with Di sconn ec t Su perv ision . Loop resist a nce: Ma x. 60 0 ohms. This ca rd is e quipp ed wi th qui ck dia gnosti c s to detec t short and op en li ne cond i- tions . PN-M03 M03 V .35 DT ...

  • NEC 2000 IVS - page 17

    ND-45504 (E ) CHAPTER 3 Ad de n dum - 00 2 Page 9 OCTO BE R, 1998 Revision 2.2 CHAPTER 3 CIRCUIT CARD INST ALLA TION CONDITIONS This c hapte r ex plains the condi tions for insta lli ng v arious kinds of cir cuit cards used in t he P BX. 1. CIRCUIT CARD MO UNTING S LO TS Figure 3-1 bel ow shows circuit card mount ing slot s all ocated in the PIM ba ...

  • NEC 2000 IVS - page 18

    CHAPTER 3 ND-4550 4 (E) P age 10 Addendum-002 Re vision 2 .2 OCT O BE R, 1998 Figu re 3- 1 Circuit Card Mo un ting Sl ots (C on tinue d) L T00 - L T15 : Line/ trunk circ uit card mounting slot s AP0 - AP8 : Applic ation ci rcuit card mounting slo ts MP0, MP1 : PN-CP02/P N-CP02-C m ounting sl ot FP : PN-CP01 mounti ng slots BUS : PN-BS0 0-A/PN-BS00- ...

  • NEC 2000 IVS - page 19

    ND-45504 (E ) CHAPTER 3 Ad den dum- 00 2 Pag e 1 1 OCTO BE R, 1998 Revision 2.2 2. INST ALLA TION CONDITIONS FOR CONTR OL CIRCUIT CARDS 2.1 PN-CP00/PN-CP00-B/P N-CP00-C (MP ) Mount t he P N-CP00/PN-CP00-B /PN-CP00-C in the MP sl ot of PIM0. 2.2 PN-CP01 (F P) 1. The PN- CP01 i s requir ed o nly if a ny o f the f ol lowi ng is t rue. • More than on ...

  • NEC 2000 IVS - page 20

    CHAPTER 3 ND-4550 4 (E) P age 12 Addendum-002 Re vision 2 .2 OCT O BE R, 1998 2.3 PN-CP02/PN-CP02-C (MP) Mount t he P N-CP02/PN-CP02-C in the MP0 and M P 1 sl ot of P IM(H)0. This card is used only f or Back up MP system. Figure 3-3 MP/FP Ca rd Mounting Slots f or Back up MP System PIM3 PIM7 PIM2 PIM6 F P F P PIM1 PIM5 PIM(H)0 PIM 4 F P M P F P P M ...

  • NEC 2000 IVS - page 21

    ND -45504 (E) CHAPTER 3 Page 1 3 Revision 2.0 2.4 PN-BS00-A/PN-BS00-B (BS00), PN-BS01-A/PN-BS01-B (BS01) 1. In a one-PIM system , neither the PN-BS00-A/PN-BS0 0-B nor the PN-BS01- A/P N-BS01-B is needed. 2. When the sy stem is equippe d with more than on e PIM, mount a PN-BS00-A/P N-BS00-B in the B US slot of P IM 0 or PIM (H) 0. 3. When the syst e ...

  • NEC 2000 IVS - page 22

    CHAPTER 3 ND -45504 (E) P age 14 Ad d e nd um - 001 Revision 2.1 JUL Y , 1998 3. INST ALLA TION CONDITIONS F OR APPLICA TION CIRCUIT CARD S 1. When t he sys tem is equi pped wit h only one PIM: • An applica tion cir cui t card can be mounted in the AP0 through AP6, and AP8 slots. • An applica tion cir cui t card can not be mounted in the AP6 sl ...

  • NEC 2000 IVS - page 23

    ND -45504 (E) CHAPTER 3 Page 1 5 Revision 2.0 Fi gu re 3 -5 A pp li cat io n C ir cuit Car d M ou nt ing S lo ts • Line/tr unk cir cuit car ds can also be mounted in AP0 - AP5 slot s. BUS/AP8 FP /AP6 MP/ FP/A P7 BUI LT-IN BA TTER Y PIM0-7 AP5 AP4 AP3 AP2 AP1 AP0 PWR * LT SL OTS (00-09) • Line/t runk cir cuit car ds can also be mo unted i n AP0 ...

  • NEC 2000 IVS - page 24

    CHAPTER 3 ND -45504 (E) Pa g e 1 6 Re vision 2.0 4. INST ALLA TION CONDI TIONS FOR LINE/TRUNK CIRCUIT CARDS Mount the line /trunk c ir cuit car ds in the LT00 through LT15 slot s of PIM0/PIM(H)0 thr ough PIM7. Figu re 3- 6 Line/ T ru nk C ircuit Ca rd Mou ntin g S lo t s • Applic ation cir cuit c ards c a n also be mou nted i n the LT 10 thr ough ...

  • NEC 2000 IVS - page 25

    ND -45504 (E) CHAPTER 4 Page 1 7 Revision 2.0 CHAPTER 4 LAMP INDICA TIONS AND SWITCH SET TINGS This chapte r expl ains variou s circuit c ards used in the PBX with respe ct to the fol lowing items. Explan ations are given in the alphabeti cal order of the circuit car d names within eac h circ uit card categor y (Control , Appli- cation, and Line /T ...

  • NEC 2000 IVS - page 26

    CHAPTER 4 ND -45504 (E) Pa g e 1 8 Re vision 2.0 1. PRECA UTION IN HANDLING When handling a circuit c ard, the install e r must we a r a grou nded wrist str ap to protec t the cir c uit car d fr o m static elec tric ity. Figure 4-1 Static Electricity Precautions (1 of 2) CARD FRONT PBX WR IST STRA P • WHEN PL UGGING/UNPLUGGING A CIRCUIT C ARD • ...

  • NEC 2000 IVS - page 27

    ND -45504 (E) CHAPTER 4 Page 1 9 Revision 2.0 Figure 4-1 Static Electricity Precaution s (2 of 2) WEAR A WRI ST STRAP AND P ERFORM THE WORK ST ANDING ON A GROUNDED CONDUCTIVE WORK SURF A CE. WHEN CA RR YING A CI RCUIT CARD AROUN D , KEEP THE CARD IN T HE CONDUCTIVE POL YETHYLENE BAG. CONDUCTIVE POL YETHYL ENE BA G CIRCUIT CARD CIRCUIT CARD • WHEN ...

  • NEC 2000 IVS - page 28

    CHAPTER 4 ND -45504 (E) Pa g e 2 0 Re vision 2.0 Figu re 4-2 C ircui t Card H andli ng P re cauti on s CARD FRONT NEVER TOUCH T HE COM PONENTS OR SOL DERED S URFACE WITH BASE HANDS. PBX The i nstall e r m ust hold the edge of circ uit card, when plug ging or unplug ging the cir cuit c ard. If you touc h anoth er area, y ou ma y be e xposed to hazar ...

  • NEC 2000 IVS - page 29

    ND-45504 (E ) CHAPTER 4 Ad den dum- 00 2 Pag e 2 1 OCTO BE R, 1998 Revision 2.2 2. LAMP INDICA TIONS AND SWITCH SETTINGS OF CONTRO L CIRCUIT CARDS Table 4- 1 below shows the control circuit car ds to be explained in this se ction. * MB = M ake Busy T able 4 -1 T able of Co ntrol Ci rcuit C ards NAME ( FUNCT IO NAL NAME) EXISTENC E O F LAM PS X: PR ...

  • NEC 2000 IVS - page 30

    CHAPTER 4 ND -45504 (E) Pa g e 2 2 Re vision 2.0 PN- BS00- A /PN-BS0 0-B ( BS00) PN-BS00- A/PN-BS00-B (BS0 0) 1. Locations of Lamps, Switc hes, and C onnector s PN- BS00- A/PN-BS00 -B (BS0 0) C ar d 2. Lamp Indica tions This card h as no i ndicator l a mps. MB CN2 CN1 ...

  • NEC 2000 IVS - page 31

    ND -45504 (E) CHAPTER 4 Page 2 3 Revision 2.0 PN-BS00-A/PN-BS00-B (BS 00) (3) Switc h Setti ngs The f igure in the S WITCH NAME colum n and the position i n in the SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the swit ch v ar ie s with the syste m c ...

  • NEC 2000 IVS - page 32

    CHAPTER 4 ND -45504 (E) Pa g e 2 4 Re vision 2.0 PN- BS01- A (BS01 ) PN-BS01- A (BS01) 1. Locations of Lamps, Switc hes, and C onnector s PN-BS01-A (BS01) Card 2. Lamp Indica tions This card h as no i ndicator l a mps. MB CN2 CN1 SW 13 ...

  • NEC 2000 IVS - page 33

    ND -45504 (E) CHAPTER 4 Page 2 5 Revision 2.0 PN-BS01-A (BS01) (3) Switc h Setti ngs The fi gure in the SWITCH N AME column and the positio n in in t he SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the swit ch v ar ie s with the syste m con cerne d. ...

  • NEC 2000 IVS - page 34

    CHAPTER 4 ND -45504 (E) Pa g e 2 6 Re vision 2.0 PN- BS01- B (BS01 ) PN-BS01- B (BS01) 1. Locations of Lamps, Switc hes, and C onnector s PN-BS01-B (BS01) Card 2. Lamp Indica tions This card h as no i ndicator l a mps. MB CN2 CN1 SW0 ...

  • NEC 2000 IVS - page 35

    ND -45504 (E) CHAPTER 4 Page 2 7 Revision 2.0 PN-BS01-B (BS01) (3) Switc h Setti ngs The fi gure in the SWITCH N AME column and the positio n in in t he SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the swit ch v ar ie s with the syste m con cerne d. ...

  • NEC 2000 IVS - page 36

    CHAPTER 4 ND -45504 (E) Pa g e 2 8 Re vision 2.0 PN- CP00 (MP) PN-CP00 (MP) 1. Locations of Lamps, Switc hes, and C onnector s PN-CP0 0 ( MP) C ar d 2. Lamp Indica tions Lamp I ndica tion s LAMP NAME COLOR FUNCTION R UN Green Flas hes at 120 IPM while the cir cuit ca rd is opera ti ng normally . CLK IN Gre en Lig ht s w hi le re cei ving cl ock s i ...

  • NEC 2000 IVS - page 37

    ND -45504 (E) CHAPTER 4 Ad de ndu m -0 01 Pag e 2 9 JULY, 1998 Revision 2.1 PN-CP0 0 (M P) (3) Switc h Setti ngs Switc h Settin g s SWITCH NAME SWITCH NUMBER SETTING POSI TI ON FUNCTION CHECK SW3 (Rotary SW) Note 0 ~ F On Line (Call proce ssing is in prog re ss) 2 Of f Line ( Ca ll proces sing is stop ped) • I/ O port: Depending on CM40 YY= 08 3 ...

  • NEC 2000 IVS - page 38

    CHAPTER 4 ND -45504 (E) Pa g e 3 0 Re vision 2.0 PN- CP00 (MP) The fi gure in the SWITCH N AME column and the positio n in in t he SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the swit ch v ar ie s with the syste m con cerne d. Note: Set the gr oove ...

  • NEC 2000 IVS - page 39

    ND-45504 (E ) CHAPTER 4 Add end um- 002 P age 3 1 OCT OBER, 1998 Re vision 2.2 PN-CP 0 0-B/ PN-CP0 0-C ( MP) PN-CP00-B/PN-C P00-C (MP) 1. Locations of Lamps, Switches , and Connectors PN-CP00-B/PN-CP00-C (M P) Car d 2. Lamp Indicat ions L am p In di ca ti ons LAMP NAME COLOR F UNCTION R UN Green Fl as he s at 120 IPM while the ci rcu it c ard is op ...

  • NEC 2000 IVS - page 40

    CHAPTER 4 ND-4550 4 (E) P age 32 Addendum-002 Re vision 2 .2 OCT O BE R, 1998 PN-CP0 0-B /PN -CP00 -C ( MP) (3) Switc h Se ttings Switch Settings SWITCH NAME S WITCH NUMBER SE T TI N G POSIT ION F UNCTION CHECK SW3 (Rot ary SW) Note 0 ~ F On Line (Cal l process ing is in pro gress) 2 Of f Line (Call proc essin g is sto pped) • I /O po r t : D ep ...

  • NEC 2000 IVS - page 41

    ND-45504 (E ) CHAPTER 4 Add end um- 002 P age 3 3 OCT OBER, 1998 Re vision 2.2 PN-CP 0 0-B/ PN-CP0 0-C ( MP) The figur e in the SWITCH NAME c olumn and the positi on in in the SETTING POSITION column indicate t he standa rd settin g of the swi tc h. When t he switch i s not set as s hown by the f igur e and , th e setti ng of the switch varie s wit ...

  • NEC 2000 IVS - page 42

    CHAPTER 4 ND-4550 4 (E) P age 34 Addendum-002 Re vision 2 .2 OCT O BE R, 1998 PN-CP0 3/ PN-C P03- C (M P) PN-CP03/PN-CP0 3-C (MP) 1. Locations of Lamps, Switches , and Connectors PN-CP03/PN-CP03-C (M P) Car d 2. Lamp Indicat ions L am p In di ca ti ons LAMP NAME COLOR F UNCTION R UN Green Fl as he s at 120 IPM while the ci rcu it c ard is ope ra ti ...

  • NEC 2000 IVS - page 43

    ND-45504 (E ) CHAPTER 4 Add end um- 002 P age 3 5 OCT OBER, 1998 Re vision 2.2 PN- CP03/ PN-C P03- C ( MP) (3) Switc h Se ttings Switch Setti ngs SWITCH NAME S WITCH NUMBER SE T TI N G POSIT ION F UNCTION CHECK SW3 (Rot ary SW) Note 0 ~ F On Line (Cal l process ing is in pro gress) 2 Of f Line (Call proc essin g is sto pped) • I /O po r t : D ep ...

  • NEC 2000 IVS - page 44

    CHAPTER 4 ND-4550 4 (E) P age 36 Addendum-002 Re vision 2 .2 OCT O BE R, 1998 PN-CP0 3/ PN-C P03- C (M P) The f igur e in the SWITCH N AME column and the positi on in in the SETTING P O SITI ON col- umn indicat e the standa rd setting of the switch. When the switc h is not set as sho wn by the f igure and , the setting of the switch v aries with th ...

  • NEC 2000 IVS - page 45

    ND -45504 (E) CHAPTER 4 Page 3 7 Revision 2.0 PN-CP0 1 (F P) PN-CP01 (F P) 1. Locations of Lamps, Switc hes, and C onnector s PN-CP01 (FP) Car d 2. Lamp Indica tions Lamp I ndica tion s LAMP NAME COLOR FUNCTION R UN Green Flas hes at 120 IPM while the cir cuit ca rd is opera ti ng normally . MB RUN SW 1 ...

  • NEC 2000 IVS - page 46

    CHAPTER 4 ND -45504 (E) Pa g e 3 8 Re vision 2.0 PN -C P0 1 (F P) (3) Switc h Setti ngs The f igure in the S WITCH NAME colum n and the position i n in the SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , th e settin g of the switc h v a ries with the s ystem concerne ...

  • NEC 2000 IVS - page 47

    ND-45504 (E ) CHAPTER 4 Ad den dum- 00 2 Pag e 3 9 OCTO BE R, 1998 Revision 2.2 PN- CP02/ PN-C P02- C ( MP) PN-CP02/PN-CP0 2-C (MP) 1. Locations of Lamps, Switches , and Connectors PN-CP02/PN-CP02-C (M P) Car d 2. Lamp Indicat ions L am p In di ca ti ons LAMP NAME COLOR F UNCTION RU N G r ee n • Fl ashes at 120 IP M while t he circ uit card is ac ...

  • NEC 2000 IVS - page 48

    CHAPTER 4 ND-4550 4 (E) P age 40 Addendum-002 Re vision 2 .2 OCT O BE R, 1998 PN-CP0 2/ PN-C P02- C (M P) (3) Switc h Se ttings Switch Setti ngs SWITCH NAME S WITCH NUMBER SE T TI N G POSIT ION F UNCTION CHECK SW3 (Rot ary SW) Note 1 0 ~ F Note 2 On Line (Cal l process ing i s in progress) 2 Of f Line (Call proc essin g is sto pped) • I /O po r t ...

  • NEC 2000 IVS - page 49

    ND-45504 (E ) CHAPTER 4 Ad den dum- 00 2 Pag e 4 1 OCTO BE R, 1998 Revision 2.2 PN- CP02/ PN-C P02- C ( MP) The f igur e in the SWITCH N AME column and the positi on in in the SETTING P O SITI ON col- umn indicat e the standa rd setting of the switch. When the switc h is not set as sho wn by the f igure and , the setting of the switch v aries with ...

  • NEC 2000 IVS - page 50

    CHAPTER 4 ND -45504 (E) Pa g e 4 2 Re vision 2.0 PN- PW00 (EXT PWR) PN-PW00 (EXTPWR) 1. Locations of Lamps, Switc hes and C onnector s PN- PW00 (EXT PWR) Car d 2. Lamp Indica tions Lamp I ndica tion s LAMP NAME CO L OR FUNCTION RUN G r ee n R e m a in s li t w h il e –4 8 V pow er is be i ng s u pp l ie d RUN MB CONN ...

  • NEC 2000 IVS - page 51

    ND -45504 (E) CHAPTER 4 Page 4 3 Revision 2.0 PN-PW00 (E XTPWR) (3) Switc h Setti ng The f igure in the S WITCH NAME colum n and the position i n in the SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the swit ch v ar ie s with the syste m con cerne d. ...

  • NEC 2000 IVS - page 52

    CHAPTER 4 ND -45504 (E) Pa g e 4 4 Re vision 2.0 PZ-PW86 (PWR) PZ- PW 86 (PW R) 1. Locations of Lamps, Switc hes, and C onnector s PZ - P W 86 (P W R) C a r d 2. Lamp Indica tions Lamp I ndica tion s LAMP NAME COLOR FUNCTION MJ Red L ights upo n occ urrence of a maj or trou ble MN Y ell o w Light s upo n o ccurre nce o f a m in or troub le ON Green ...

  • NEC 2000 IVS - page 53

    ND -45504 (E) CHAPTER 4 Page 4 5 Revision 2.0 PZ-PW86 (PWR) (3) Switc h Setti ngs The f igure in the S WITCH NAME colum n and the position i n in the SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the swit ch v ar ie s with the syste m con cerne d. Sw ...

  • NEC 2000 IVS - page 54

    CHAPTER 4 ND -45504 (E) Pa g e 4 6 Re vision 2.0 PZ-PW86-A (PWR) PZ -PW 86 -A (P WR) 1. Locations of Lamps, Switc hes, and C onnector s PZ - P W 86 - A (P W R ) C a r d 2. Lamp Indica tions Lamp I ndica tion s LAMP NAME COLOR FUNCTION MJ Red L ights upo n occ urrence of a maj or trou ble MN Y ell o w Light s upo n o ccurre nce o f a m in or troub l ...

  • NEC 2000 IVS - page 55

    ND -45504 (E) CHAPTER 4 Page 4 7 Revision 2.0 PZ-PW86-A (PWR) (3) Switc h Setti ngs The f igure in the S WITCH NAME colum n and the position i n in the SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the swit ch v ar ie s with the syste m con cerne d. ...

  • NEC 2000 IVS - page 56

    CHAPTER 4 ND -45504 (E) Pa g e 4 8 Re vision 2.0 PZ-PW86 (C) (PWR) PZ -PW 86 (C) (PWR ) 1. Locations of Lamps, Switc hes, and C onnector s PZ-PW86(C) (PWR ) Card 2. Lamp Indica tions Lamp I ndica tion s LAMP NAME COLOR FUNCTION MJ Red L ights upo n occ urrence of a maj or trou ble MN Orang e L ights upon o c currence of a min or t rouble ON Green R ...

  • NEC 2000 IVS - page 57

    ND -45504 (E) CHAPTER 4 Page 4 9 Revision 2.0 P Z - P W 86 (C ) (P W R ) (3) Switc h Setti ngs The fi gure in the SWITCH N AME column and the positio n in in t he SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the swit ch v ar ie s with the syste m co ...

  • NEC 2000 IVS - page 58

    CHAPTER 4 ND -45504 (E) Pa g e 5 0 Re vision 2.0 PZ-PW86 (D) (PWR) PZ -PW 86 (D) (PWR ) 1. Locations of Lamps, Switc hes, and C onnector s PZ-PW86(D) (PWR ) Card 2. Lamp Indica tions Lamp I ndica tion s LAMP NAME COLOR FUNCTION MJ Red Li ghts upon oc cu rrence of a major trouble MN Orange Light s upon occu rrence of a mino r t rouble ON Green Remai ...

  • NEC 2000 IVS - page 59

    ND -45504 (E) CHAPTER 4 Page 5 1 Revision 2.0 P Z - P W 86 (D ) (P W R ) (3) Switc h Setti ngs The fi gure in the SWITCH N AME column and the positio n in in t he SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the swit ch v ar ie s with the syste m co ...

  • NEC 2000 IVS - page 60

    CHAPTER 4 ND -45504 (E) P age 52 Ad d e nd um - 001 Revision 2.1 JUL Y , 1998 3. LAMP INDICA TIONS AND SWITCH SETTINGS OF APPLICA TION CIRCUIT CARDS Table 4-2 below shows the a pplic ation c ircuit cards to be expl a ined in this s ection. * MB=Make Busy T able 4-2 T able of Application Cir cu it Car ds NAME (FUNCTIONAL NAME) EXIS TENCE O F LAMP S ...

  • NEC 2000 IVS - page 61

    ND -45504 (E) CHAPTER 4 Page 5 3 Revision 2.0 PN-AP00-A (AP00) PN-AP00- A (AP00) 1. Locations of Lamp, Switches , and Connect ors PN-AP00-A (AP00) Card MB SW0 SENSE RUN MB SW1 WE RS3 L3 L2 L1 L0 RS2 RS1 RS0 J16 ...

  • NEC 2000 IVS - page 62

    CHAPTER 4 ND -45504 (E) Pa g e 5 4 Re vision 2.0 PN- AP00- A (AP00 ) (2) Lamp Indic ations Lamp Ind ica tion s LAMP NAME COLOR FUNCTION R UN Green Flashes at 120 IPM while this card is operat ing norma lly . WE Red Not used. L0 - L3 Green Second dat a settin g v alue for the fi rst data 250 of CM D001 0 1 (port 0) - 3 (port 2) L3 Indi catio n of t ...

  • NEC 2000 IVS - page 63

    ND -45504 (E) CHAPTER 4 Page 5 5 Revision 2.0 PN-AP00-A (AP00) (3) Switc h Setti ngs Switc h Settin g s SWITCH NAME SWITC H NUMBER SET TI N G POSIT ION FUNCTION C HECK SE NS E (Rotary S W) Note 1 4 - F S et th e s w it ch to m at ch th e A P N um ber ( 04 - 15 ) to be se t by CM05. 0 - 3 N ot used MB (T oggle S W) Note 2 UP F or make -b us y For no ...

  • NEC 2000 IVS - page 64

    CHAPTER 4 ND -45504 (E) Pa g e 5 6 Re vision 2.0 PN- AP00- A (AP00 ) SW0 (D ip S W) 1 Note 3 ON Ena bles th e rece i ve cl ock fro m th e DCE (Mo- dem) si de when the No. 0 P ort i s s ynchronous. (Cl ock i s rece ived at th e RX C ter m in al.) OFF • Us e s t he in ter nal cloc k as the r ecei v e cl ock when the No. 0 Port is syn chro nous • ...

  • NEC 2000 IVS - page 65

    ND -45504 (E) CHAPTER 4 Page 5 7 Revision 2.0 PN-AP00-A (AP00) The fi gure in the SWITCH N AME column and the positio n in in t he SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the swit ch v ar ie s with the syste m con cerne d. Switch Setti ngs (Con ...

  • NEC 2000 IVS - page 66

    CHAPTER 4 ND -45504 (E) Pa g e 5 8 Re vision 2.0 PN- AP00- A (AP00 ) Note 1: Set the gr oo ve on the switc h k nob to the desir ed switch posi tion. Note 2: When th e power is on, flip the MB swit ch t o ON (UP p osition) be for e plugging/ unplug ging the cir cuit card. Note 3: The SW 1 is us ed to sele ct t he AP o pe rat ing mode as shown b e lo ...

  • NEC 2000 IVS - page 67

    ND -45504 (E) CHAPTER 4 Page 5 9 Revision 2.0 PN-AP01 (AP01) PN-AP01 (AP01 ) 1. Locations of Lamps, Switc hes, and C onnector s PN-AP01 (AP0 1) Card 2. Lamp Indica tions Lamp I ndica tion s LAMP NAME COLOR FUNCTION R UN Green Flashe s at 120 IPM while thi s card is ope rating norm a lly . L0-L3 L3 Green Indica tio n of the s ta tus of CTS s igna l ...

  • NEC 2000 IVS - page 68

    CHAPTER 4 ND -45504 (E) Pa g e 6 0 Re vision 2.0 PN- AP01 (A P0 1 ) (3) Switc h Setti ngs Switc h Settin g s SWITCH NAME SWITCH NUMBER SETTI N G POSIT ION FUNCTION C H ECK SE NS E (Rotary S W) Note 1 4 - F Set th e s wit ch to mat ch the AP Num ber (04 - 15) to be se t b y CM05. 0 - 3 Not used MB(T oggle SW) Note 2 UP F or make -b us y For no rm a ...

  • NEC 2000 IVS - page 69

    ND -45504 (E) CHAPTER 4 Page 6 1 Revision 2.0 PN-AP01 (AP01) The fi gure in the SWITCH N AME column and the positio n in in t he SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the swit ch v ar ie s with the syste m con cerne d. Note 1: Set the gr oo v ...

  • NEC 2000 IVS - page 70

    CHAPTER 4 ND -45504 (E) Pa g e 6 2 Re vision 2.0 PN-BR T A (BRI) PN-BR T A (BRI) 1. Locations of Lamps, Switc hes, and C onnector s PN-BRT A (BRI) Card SENS RUN MB B1 B2 D ALM SW0 SW1 ...

  • NEC 2000 IVS - page 71

    ND -45504 (E) CHAPTER 4 Page 6 3 Revision 2.0 PN-BRT A (BRI) (2) Lamp Indic ations Lamp Indications on the P N-BRT A (BRI) Car d LAMP NAME COLOR FUNCTION RUN Gre en Flashe s at 120 IPM while thi s card is oper a ting norm ally . B1 Gre en B1 channe l st atus ON: B usy OFF: Idle Flas h (6 0 I P M): Make Bus y B2 Gre en B2 channe l st atus ON: B usy ...

  • NEC 2000 IVS - page 72

    CHAPTER 4 ND -45504 (E) Pa g e 6 4 Re vision 2.0 PN-BR T A (BRI) (3) Switc h Setti ngs The f igure in the S WITCH NAME colum n and the position i n in the SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the switc h v aries with the system concerne d. N ...

  • NEC 2000 IVS - page 73

    ND -45504 (E) CHAPTER 4 Page 6 5 Revision 2.0 PN-BRT A (BRI) Note 3: Set SW0-2 and SW0-3 as foll ows. BRI 0 B RI 1 BRI 2 .... BRI 11 REMARKS SW 0-2 SW 0- 3 SW 0-2 SW 0-3 SW 0-2 SW 0-3 .... SW 0-2 SW 0-3 When one BRI i s prov ided. ON ON T he M P ca r d wi ll r ec eive th e cl ock si g nal from BRI 0 at it s PLO 0 inp ut. W hen m ore t han one BRI i ...

  • NEC 2000 IVS - page 74

    PN-2BRTC (BRI) CHAPTER 4 ND -45504 (E) Page 65-1 Adde ndum-001 Revision 2.1 JULY, 19 98 PN-2BRT C (BRI) 1. Location s of Lamps, Switche s, a nd connectors PN-2BRT C (BRI) Car d RU N SEN S MB SW0 D1 ALM 1 B20 B10 SW11 SW 10 D0 AL M0 B21 B11 ...

  • NEC 2000 IVS - page 75

    PN-2BRTC (BRI) ND -45504 (E) CHAPTER 4 Ad d e nd um - 001 P age 6 5- 2 JUL Y , 1998 Revisi on 2.1 2. Lamp Indic ations Lamp In dica tions LAMP NAME COLOR FUNCTION R UN Gree n Flashes at 12 0 IPM while this c ard i s o perating normall y . B21 Red No.1 Circuit B2 channel sta tus ON: Busy OFF: Idle Flash (60 IPM): Ma k e Busy B11 Red B1 channe l sta ...

  • NEC 2000 IVS - page 76

    PN-2BRTC (BRI) CHAPTER 4 ND -45504 (E) Page 65-3 A dde ndum-001 Revision 2.1 JULY, 19 98 3. Switch Setti ngs Switch Setti ngs SWITCH NAME SWITCH NUMBER SETTING POSI TI ON FUNCTION CHECK SENS (Rotary SW) Note 1 4 ~ F Set the s w itch to m atch t he AP Nu mber ( 04- 15) as se t b y CM05. 0 ~ 3 Not used MB (T ogg le S W ) Note 2 UP For make- busy For ...

  • NEC 2000 IVS - page 77

    PN-2BRTC (BRI) ND -45504 (E) CHAPTER 4 Ad d e nd um - 001 P age 6 5- 4 JUL Y , 1998 Revisi on 2.1 The fi gure in the SWITCH N AM E colum n and the posit ion in in the SETTING POSI TION column indicate the stand ard setting of the switch. When the switch is not se t as sho wn by the f igure and , the setti ng of the switch v aries with the system co ...

  • NEC 2000 IVS - page 78

    CHAPTER 4 ND -45504 (E) Pa g e 6 6 Re vision 2.0 PN-CC00 (ET HER) PN-CC00 (ETHER) 1. Locations of Lamps, Switc hes, and C onnector s PN -CC 00 ( ET H ER ) C ard ETHER RUN IP SW31 SW ERR S1 S2 S3 RUN SW ERR S1 S2 S3 PN-CC00 P Z-M397 SW51 ...

  • NEC 2000 IVS - page 79

    ND -45504 (E) CHAPTER 4 Ad de ndu m -0 01 Pag e 6 7 JULY, 1998 Revision 2.1 PN-CC 00 ( ETHER) 2. La mp Indi catio ns Lamp I ndica tion s LAMP NAME COLOR FUNCTION R UN Green S tea dil y lights whil e this card is operat ing normall y . ERR Red Flashes at 120 IPM when syste m error occurs . S1 Green Lights when it is tr an smit ti ng or re cei ving t ...

  • NEC 2000 IVS - page 80

    CHAPTER 4 ND -45504 (E) Pa g e 6 8 Re vision 2.0 PN-CC00 (ET HER) (3) Switc h Setti ngs Note: Eac h equipment mu st have a uni que MAC addr ess to dist inguis h betwee n systems. The r efor e, wh en mor e than one PBX i s installe d i n the same ne twork , assign t he lower 3 digi ts of the fol lowing MA C addr ess by SW31 and SW51 to pr event dupl ...

  • NEC 2000 IVS - page 81

    ND -45504 (E) CHAPTER 4 Adde ndum-001 Page 68-1 JULY, 1998 Revision 2.1 PN-CC 01 ( ETHER) PN-CC01 (ETHER) 1. Loc ation of Lamps, S witche s, a nd Connec tors P N -C C0 1 (E T H ER ) C a rd RUN MB LI NK XMT RCV RVP SW2 SW1 ERR 10 BA SE-T IP ...

  • NEC 2000 IVS - page 82

    CHAPTER 4 ND -45504 (E) P age 68 - 2 Ad dend um- 00 1 Revision 2.1 JUL Y , 1998 PN-CC01 (ET HER) 2. La mp Indi catio ns Lamp I ndica tion s LAMP NAME COLOR FUNCTION R UN Green F lashe s at 60 IPM while this ca rd is opera ti ng normally . LINK Green Lights when link is es ta bl ished . XMT Gre en L ights when it is t ran s mitti ng the data . RC V ...

  • NEC 2000 IVS - page 83

    ND -45504 (E) CHAPTER 4 Adde ndum-001 Page 68-3 JULY, 1998 Revision 2.1 PN-CC 01 ( ETHER) 3. S wit ch Sett ings Note 1: Whe n the power is on, set th e MB switch to ON (UP position) be for e plugg ing/unplug ging the Cir cuit car d. Note 2: Eac h equipment must hav e a unique MAC ad dr e ss to di stinguish between sy stems. Ther efor e, when mor e ...

  • NEC 2000 IVS - page 84

    CHAPTER 4 ND -45504 (E) P age 68 - 4 Ad dend um- 00 1 Revision 2.1 JUL Y , 1998 This page is for your notes. ...

  • NEC 2000 IVS - page 85

    ND -45504 (E) CHAPTER 4 Page 6 9 Revision 2.0 PN-CK00 (PL O) PN-CK00 (PLO) 1. Locations of Lamps, Switc hes, and C onnector s PN-CK00 (PLO) Card 2. Lamp Indica tions DRIFT: Means the st a tus which t he oscilla tio n of cloc k sig nal from the PN-CK00 is not s ynchroniz ed with the networ k. Lamp I ndica tion s LAMP NAME COLOR FUNCTION SYNC Green L ...

  • NEC 2000 IVS - page 86

    CHAPTER 4 ND -45504 (E) P age 70 Ad d e nd um - 001 Revision 2.1 JUL Y , 1998 PN-CK00 (PL O) (3) Switc h Setti ngs The f igure in the SWITCH N AM E colu m n and the posi tion in in the SETTING P OSITION column indic ate the sta ndard setti ng of the switch. When the switch is not se t as sho wn by the f igure and , the sett ing of the switch v ar i ...

  • NEC 2000 IVS - page 87

    ND -45504 (E) CHAPTER 4 Ad de ndu m -0 01 Pag e 7 1 JULY, 1998 Revision 2.1 PN-CK00 (PL O) Note 1: Whe n t he power is on, f lip the MB switc h ON (UP position) befo r e plug ging /unpluggi ng the c ir cuit c ar d. Note 2: Whe n using this car d, set the SW2 switc h on the PN-CP00/PN-CP00-B/PN -CP03 (MP) as follo ws. SW2-2: OFF SW2-3: ON Note 3: Wh ...

  • NEC 2000 IVS - page 88

    CHAPTER 4 ND -45504 (E) Pa g e 7 2 Re vision 2.0 PN- 24DT A (DTI ) PN-2 4DT A (DT I) 1. Locations of Lamps, Switc hes, and C onnector s PN-24DT A (DTI) Card 2. Lamp Indica tions Lamp I ndica tion s LAMP NAME COLOR FUNCTION RUN Green Flashe s at 120 IPM while thi s card is oper ating norm a lly . CRC R ed Lights when detect ing Cycli c Redunda ncy C ...

  • NEC 2000 IVS - page 89

    ND -45504 (E) CHAPTER 4 Page 7 3 Revision 2.0 PN-24DT A (DTI) (3) Switc h Setti ngs Switc h Settin g s SWIT CH NAME SWITCH NUMBER SETTING POSIT ION FUNCTION CHE C K SE NS (Rotary S W) Note 1 4 - F Set the swit ch to mat ch the AP Number (04 - 15) to be se t by CM05. 0 - 3 Not used MB (T oggle S W) Note 2 UP Fo r m a ke - bus y For nor mal operat io ...

  • NEC 2000 IVS - page 90

    CHAPTER 4 ND -45504 (E) Pa g e 7 4 Re vision 2.0 PN- 24DT A (DTI ) The f igure in the S WITCH NAME colum n and the position i n in the SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the switc h v aries with the system concerne d. Note 1: Set the gr oo ...

  • NEC 2000 IVS - page 91

    ND -45504 (E) CHAPTER 4 Page 7 5 Revision 2.0 PN-24DT A -A (DTI) PN-2 4D T A -A (D TI ) 1. Location of Lamps, Switches , and Connector s PN-24DT A-A (DTI) Card 2. Lamp Indica tions Lamp I ndica tion s LAMP NAME COLOR FUNCTION RUN Green Flashe s at 120 IPM while thi s card is oper ating norm a lly . CRC R ed Lights when detect ing Cycli c Redunda nc ...

  • NEC 2000 IVS - page 92

    CHAPTER 4 ND -45504 (E) Pa g e 7 6 Re vision 2.0 P N -2 4 D T A -A ( D T I) (3) Switc h Setti ngs Switc h Settin g s SWIT CH NAME SWITCH NUMBER SETTING POSIT ION FUNCTION CHE C K SENS (Rotary S W) Note 1 4 ~ F Set t h e s wit ch to m at ch th e A P Num b er ( 04 ~ 15) t o be s et b y CM05. 0 ~ 3 Not use d MB (T oggle SW) Note 2 UP F o r m a ke - bu ...

  • NEC 2000 IVS - page 93

    ND -45504 (E) CHAPTER 4 Page 7 7 Revision 2.0 PN-24DT A -A (DTI) The fi gure in the SWITCH N AME column and the positio n in in t he SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the swit ch v ar ie s with the syste m con cerne d. Note 1: Set the gr ...

  • NEC 2000 IVS - page 94

    CHAPTER 4 ND -45504 (E) Pa g e 7 8 Re vision 2.0 P N -2 4 D T A -A ( D T I) Note 3: Set SW -1 and SW-2 as foll ow s: Note 4: When the PBX is the master o ffice , se t the SW1- 1 and SW1-2 on all the DTI c ards mo unt ed in P IM 0 to “OFF”. DTI0 DT I1 DTI 2 DT I3 DTI4 REMARKS SW- 1 SW- 2 SW- 1 SW- 2 SW- 1 SW - 2 SW - 1 SW - 2 SW- 1 SW- 2 When on ...

  • NEC 2000 IVS - page 95

    ND-45504 (E ) CHAPTER 4 Add end um- 00 1 Pa ge 78- 1 JU LY, 199 8 Revi sion 2.1 PN-30DTC /30DTC-A (DTI) PN-3 0D T C/3 0D T C-A (D T I) 1. Location s of Lamps, Switche s, a nd Connectors PN-30DTC/30DTC-A (DTI) Card SENS RUN MB PCM SW FRM MF R M RMT MRM T AIS BL JP JPS JPR ...

  • NEC 2000 IVS - page 96

    CHAPTER 4 ND-45504 (E) Page 78-2 Adden dum-001 Revision 2.1 J ULY, 199 8 PN-30DT C/30D TC-A (DTI) 2. Lamp Indic ations La m p In di ca ti ons LAMP NAME COLOR FUNCTION RUN G reen Flash es at 120 IPM when this card is normal ly ope rati ng. PCM Red Lights when detecting PCM signal loss . FRM Red Lights when detecting Fra me Alignment si gnal loss. MF ...

  • NEC 2000 IVS - page 97

    ND-45504 (E ) CHAPTER 4 Add end um- 00 1 Pa ge 78- 3 JU LY, 199 8 Revi sion 2.1 PN-30DTC /30DTC-A (DTI) 3. Switch Setti ngs Sw itch Se ttin g s SW IT C H NAM E SWITCH NUMBER SETTING POSIT ION F UNCTION CHECK SENS (Ro t ary SW ) N o te 1 4 ~ F Set the switch to matc h the AP Number (04-15 ) as set by CM05. 0 ~ 3 Not use d MB (Toggle SW) N o te 2 UP ...

  • NEC 2000 IVS - page 98

    CHAPTER 4 ND-45504 (E) Page 78-4 Adden dum-001 Revision 2.1 J ULY, 199 8 PN-30DT C/30D TC-A (DTI) The figur e in the SWITCH NAME colu mn and the position in in the SETTING POSITION col- umn indicate the standard se tting of the switc h. When the switch is not set as shown b y the f igure and , the setting of the swit ch var ie s with the syste m co ...

  • NEC 2000 IVS - page 99

    ND-45504 (E ) CHAPTER 4 Add end um- 00 1 Pa ge 78- 5 JU LY, 199 8 Revi sion 2.1 PN-30DTC /30DTC-A (DTI) Not e 3: Set SW -1 and SW -2 as follows. Not e 4: Coaxial c abl e conne ction to t he PN -30DTC/30DTC-A i s not avai lable in the U .S. D T I 0D T I 1D T I 2D T I 3 RE MARKS SW-1 S W-2 SW-1 SW-2 SW-1 SW -2 SW-1 SW-2 When on e DTI is pro vid ed. O ...

  • NEC 2000 IVS - page 100

    CHAPTER 4 ND-45504 (E) Page 78-6 Adden dum-001 Revision 2.1 J ULY, 199 8 This page is for your notes. ...

  • NEC 2000 IVS - page 101

    ND -45504 (E) CHAPTER 4 Page 7 9 Revision 2.0 PN-ME00 (EXTM EM) PN-ME00 (EXT MEM) 1. Locations of Lamps, Switc hes, and C onnector s PN-M E00 (EXT ME M) Ca r d 2. Lamp Indica tions Lamp Ind ica tions LAMP NAME COLOR FUNCTION R UN Green Flashes a t 120 IPM whil e thi s c ircuit car d i s op erati ng norm ally . WP Red Light s whe n t he RAM is be in ...

  • NEC 2000 IVS - page 102

    CHAPTER 4 ND -45504 (E) Pa g e 8 0 Re vision 2.0 PN- ME00 (E XTMEM) ■ Mounting the S RAM Card ① Slide the lock switch do wnw ard (Lock Release), the n remo v e the batte ry case from the SRAM card. ② Mount the batt ery on the batter y case , the n inse rt the batter y case into the SRAM card. ③ Slide the lock switch upw ard ( Lock). ④ Mou ...

  • NEC 2000 IVS - page 103

    ND -45504 (E) CHAPTER 4 Page 8 1 Revision 2.0 PN-ME00 (EXTM EM) ■ Removi ng the SRAM C ard ➀ Push the card slot bar of the PN-ME00 card. ➁ Remove t he SR AM ca rd. Remo ving the SRAM Card ■ Replacing the SRAM Batte ry ➀ Slide the lock switch do wnw ard (Lock Release), the n remo v e the batte ry case from the SRAM card. ➁ Replace the ba ...

  • NEC 2000 IVS - page 104

    CHAPTER 4 ND -45504 (E) Pa g e 8 2 Re vision 2.0 PN- ME00 (E XTMEM) R epl acing t he S RA M B att er y PN-ME0 0 REMO VE THE BA TTER Y CASE LITH IUM BA T TERY : B R23 25 OR CR 232 5 ...

  • NEC 2000 IVS - page 105

    ND -45504 (E) CHAPTER 4 Page 8 3 Revision 2.0 PN-ME00 (EXTM EM) (3) Switch Settings The fi gure in the SWITCH N AME column and the positio n in in t he SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the swit ch v ar ie s with the syste m con cerne d. ...

  • NEC 2000 IVS - page 106

    CHAPTER 4 ND -45504 (E) Pa g e 8 4 Re vision 2.0 P N -4 RST B (M F R ) PN-4RSTB (MFR) 1. Locations of Lamps, Switc hes and C onnector s PN-4RSTB (MFR) Card 2. Lamp Indica tions Lamp I ndica tion s LAMP NAME COLOR FUNCTION RUN Green F lashe s at 120 IPM wh ile t he c ircuit card i s ope ratin g n ormally . OPE Red • Lights when t he co rrespon din ...

  • NEC 2000 IVS - page 107

    ND -45504 (E) CHAPTER 4 Page 8 5 Revision 2.0 PN-4RSTB (MFR) (3) Switch Settings Note 1: Set the gr oo ve on the switc h k nob onto the desi r ed switch position . Note 2: When the power is on, flip the MB sw i tch to ON (UP posit ion) befor e pl uggi ng/unplug ging the cir cuit card. Switc h Settin g s SWIT CH NAME SWITCH NUMBER SE T TI N G POSIT ...

  • NEC 2000 IVS - page 108

    CHAPTER 4 ND -45504 (E) Pa g e 8 6 Re vision 2.0 P N -4 RST C (C I R ) PN-4 RSTC (C IR) 1. Locations of Lamps, Switc hes and C onnector s PN-4RST C (CIR) Card 2. Lamp Indica tions Lamp I ndica tion s LAMP NAME COLOR FUNCTION R UN Green Flashes at 120 IPM while the cir cuit ca rd is opera ti ng normally . BL0-3 Red L ight s whe n r ecei ving a CAL L ...

  • NEC 2000 IVS - page 109

    ND -45504 (E) CHAPTER 4 Page 8 7 Revision 2.0 PN-4RSTC (CIR) (3) Switch Settings Note 1: Set the gr oo ve on the switc h k nob onto the desi r ed switch position . Note 2: When the power is on, flip the MB sw i tch to ON (UP posit ion) befor e pl uggi ng/unplug ging the cir cuit card. Switc h Settin g s SWIT CH NAME SWITCH NUMBER SET TI N G POSIT I ...

  • NEC 2000 IVS - page 110

    CHAPTER 4 ND -45504 (E) Pa g e 8 8 Re vision 2.0 PN-SC00 (CCH) PN-SC00 (CCH) 1. Locations of Lamps, Switc hes and C onnector s PN-SC00 (CCH) Card 2. Lamp Indica tions Lamp I ndica tion s LAMP NAME COLOR FUNCTION RUN Green Flashes at 120 IPM while thi s card is oper a ting norm ally . LC Gr een L ights when communi cati ons are nor mall y ongoin g w ...

  • NEC 2000 IVS - page 111

    ND -45504 (E) CHAPTER 4 Page 8 9 Revision 2.0 PN-SC00 (CCH) (3) Switch Settings Switc h Settin g s SWIT CH NAME SWITCH NUMBER SETTING POSIT ION FUNCTION CHECK SENS (Rotary S W) Note 1 4 - F Set the swit c h to mat ch the AP Number (04 - 15) to be set by CM05. 0 - 3 Not u s ed MB(T oggle SW) Note 2 UP F o r m a ke - bus y For nor mal operat ion SW0 ...

  • NEC 2000 IVS - page 112

    CHAPTER 4 ND -45504 (E) Pa g e 9 0 Re vision 2.0 PN-SC00 (CCH) The f igure in the S WITCH NAME colum n and the position i n in the SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the switc h v aries with the system concerne d. Note 1: Set the gr oo ve ...

  • NEC 2000 IVS - page 113

    ND -45504 (E) CHAPTER 4 Page 9 1 Revision 2.0 PN-SC01 (DCH) PN-SC01 (DCH) 1. Locations of Lamps, Switc hes and C onnector s PN-SC01 (DCH) Card 2. Lamp Indica tions Lamp I ndica tion s LAMP NAME COLOR FUNCTION RUN Green Flashes at 120 IPM while thi s card is oper a ting norm ally . LC Gre en L ights when commu nications ar e normally on going with t ...

  • NEC 2000 IVS - page 114

    CHAPTER 4 ND -45504 (E) Pa g e 9 2 Re vision 2.0 PN-SC01 (DCH) (3) Switch Settings Switc h Settin g s SW IT C H NAME SWITCH NUMBER SETTING POSI TI ON FUNCTION C HECK SE NS (Rotary S W) Note 1 4 - F Set th e s wit ch to mat ch the AP Num b er ( 04 - 15) to be set b y CM05. 0 - 3 Not use d MB(T oggle SW) Note 2 UP For make- bus y Fo r normal ope rat ...

  • NEC 2000 IVS - page 115

    ND -45504 (E) CHAPTER 4 Page 9 3 Revision 2.0 PN-SC01 (DCH) The f igure in the S WITCH NAME colum n and the position i n in the SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the switc h v aries with the system concerne d. Note 1: Set the g r oove o n ...

  • NEC 2000 IVS - page 116

    CHAPTER 4 ND -45504 (E) Pa g e 9 4 Re vision 2.0 PN-SC02 (ICH) PN-SC02 (ICH) 1. Locations of Lamps, Switc hes, and C onnector s PN-SC02 (ICH) Card 2. Lamp Indica tions Lamp I ndica tion s LAMP NAME COLOR FUNCTION RUN Green Flashes at 120 IPM while thi s card is oper a ting norm ally . DOPE0 Green ON : No. 0 circuit D channel li nk is conn ected . O ...

  • NEC 2000 IVS - page 117

    ND -45504 (E) CHAPTER 4 Page 9 5 Revision 2.0 PN-SC02 (I CH) (3) Switch Settings The f igure in the S WITCH NAME colum n and the position i n in the SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the switc h v aries with the system concerne d. Note 1: ...

  • NEC 2000 IVS - page 118

    CHAPTER 4 ND -45504 (E) Pa g e 9 6 Re vision 2.0 PN-SC03 (ICH) PN-SC03 (ICH) 1. Locations of Lamps, Switc hes, and C onnector s PN-SC03 (ICH) Card 2. Lamp Indica tions Lamp Indi cat ions on IC H Card LAMP NAME CO L OR FUNCTION R UN Green Flashes at 120 IPM wh ile the c a rd i s operat ing normall y . DOPE7 Green L ights when No. 7 circui t D c hann ...

  • NEC 2000 IVS - page 119

    ND -45504 (E) CHAPTER 4 Page 9 7 Revision 2.0 PN-SC03 (I CH) (3) Switch Settings The fi gure in the SWITCH N AME column and the positio n in in t he SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the swit ch v ar ie s with the syste m con cerne d. Not ...

  • NEC 2000 IVS - page 120

    CHAPTER 4 ND -45504 (E) Pa g e 9 8 Re vision 2.0 PN- SC03 (C SH) PN-SC03 (CSH) 1. Locations of Lamps, Switc hes, and C onnector s PN-SC03 (CS H) Card SENSE RUN MB DOPE7 DOPE6 DOPE5 DOPE4 DOPE3 DOPE2 DOPE1 DOPE0 ...

  • NEC 2000 IVS - page 121

    ND -45504 (E) CHAPTER 4 Page 9 9 Revision 2.0 PN- SC03 (C SH) (2) Lamp Indications 3. Switch Setti ngs The fi gure in the SWITCH N AME column and the positio n in in t he SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the swit ch v ar ie s with the sy ...

  • NEC 2000 IVS - page 122

    CHAPTER 4 ND -45504 (E) P age 100 Re vision 2.0 4. LAMP INDICA TI ONS AND SWITCH SETTINGS OF LINE/ TRUNK CIRCUIT CARDS T able 4- 3 belo w sho ws the line/tr unk c ircui t car ds to be expl a ined in this section. T ab le 4- 3 T ab le of Line /T runk Cir cui t Car ds NAM E (FUNCTIONAL NAME) EXI STENCE O F LAM PS X: PR OVIDED — : N OT P ROVID ED EX ...

  • NEC 2000 IVS - page 123

    ND -45504 (E) CHAPTER 4 Page 101 Revision 2.0 PN -2 A MP A (A MP ) PN-2 A MP A (AM P ) 1. Locations of Lamps, Switc hes and C onnector s PN-2AMP A (AMP) Card 2. Lamp Indica tions 3. Switch Setti ngs This card h as no s witches. Lamp I ndica tion s LAMP NAME COLOR FUNCTION BL 0 , 1 Red • Remains lit when the corres ponding ci rcuit is in use. • ...

  • NEC 2000 IVS - page 124

    CHAPTER 4 ND -45504 (E) P age 102 Re vision 2.0 PN-A UCA (A UC) PN-A UC A (A U C) 1. Locations of Lamps, Switc hes and C onnector s PN-A UCA (A UC) Card 2. Lamp Indica tions 3. Switch Setti ngs This card h as no s witches. Lamp I ndica tion s LAMP NAME COLOR FUNCTION BL 0 , 1 Red • Remains lit when the corres ponding ci rcuit is in use. • Flash ...

  • NEC 2000 IVS - page 125

    ND -45504 (E) CHAPTER 4 Page 103 Revision 2.0 PN-CFT A (CF T) PN-C F T A (CF T) 1. Locations of Lamps, Switc hes and C onnector s PN-CFT A (CFT) Card 2. Lamp Indica tions 3. Switch Setti ngs This card h as no s witches. Lamp I ndica tion s LAMP NAME COLOR FUNCTION BL 0 R ed • R e m a in s li t w h en th e ca rd is in u s e. • F la s hes ( 60 IP ...

  • NEC 2000 IVS - page 126

    CHAPTER 4 ND -45504 (E) P age 104 Re vision 2.0 P N -4 COTB (C OT ) PN -4 COTB (CO T ) 1. Locations of Lamps, Switc hes and C onnector s PN-4CO T B (COT) Card 2. Lamp Indica tions 3. Switch Setti ngs This card h as no s witches. Lamp I ndica tion s LAMP NAME COLOR FUNCTION BL0 - 3 Red • R emains lit when the corre spondi ng circui t is in us e. ? ...

  • NEC 2000 IVS - page 127

    ND -45504 (E) CHAPTER 4 Page 105 Revision 2.0 PN- 4CO TG (CO T) PN-4 C O TG (C O T ) 1. Locations of Lamps, Switc hes and C onnector s PN-4COTG ( CO T) Card 2. Lamp Indica tions 3. Switch Setti ngs This card h as no s witches. Lamp I ndica tion s LAMP NAME COLOR FUNCTION BL0 - 3 Red • R emains lit when the corre spondi ng circui t is in us e. • ...

  • NEC 2000 IVS - page 128

    CHAPTER 4 ND -45504 (E) P age 106 Re vision 2.0 PN- 2D A T A (D A T ) PN-2 D A T A (D A T ) 1. Locations of Lamps, Switc hes and C onnector s PN - 2 DA T A (DA T ) C a r d 2. Lamp Indica tions Lamp I ndica tion s LAMP NAME COLOR FUNCTION BL 0 , 1 Red • Remains lit when the corres ponding ci rcuit is in use. • Flashes at 60 IPM when the c orre s ...

  • NEC 2000 IVS - page 129

    ND -45504 (E) CHAPTER 4 Page 107 Revision 2.0 PN-2D A T A (D A T) (3) Switch Settings The f igure in the S WITCH NAME colum n and the position i n in the SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the swit ch v ar ie s with the syste m con cerne d ...

  • NEC 2000 IVS - page 130

    CHAPTER 4 ND -45504 (E) P age 108 Re vision 2.0 PN-DK00 (DK) PN-DK00 (DK) 1. Locations of Lamps, Switc hes and C onnector s PN-DK00 (DK) Card 2. Lamp Indica tions This card h as no i ndicator l a mps. 3. Switch Setti ngs This card h as no s witches. ...

  • NEC 2000 IVS - page 131

    ND -45504 (E) CHAPTER 4 Page 109 Revision 2.0 PN-4DITB (DIT) PN-4 DI TB (D I T) 1. Locations of Lamps, Switc hes, and C onnector s PN-4DITB (DIT) Car d 2. Lamp Indica tions 3. Switch Setti ngs This card h as no s witches. Lamp I ndica tion s LAMP NAME COLOR FUNCTION BL0 ~ 3 Re d • Light when the corres pondi ng ci rcuit is in use. • Fla shes at ...

  • NEC 2000 IVS - page 132

    CHAPTER 4 ND -45504 (E) P age 110 Re vision 2.0 PN-2DLCB (DLC) PN-2DLCB (DLC) 1. Locations of Lamps, Switc hes and C onnector s PN-2DLCB (DL C) Ca r d 2. Lamp Indica tions 3. Switch Setti ngs This card h as no s witches. Lamp I ndica tion s LAMP NAME COLOR FUNCTION BL 0 , 1 R ed • Remains lit when the corre s pondi ng ci rcuit is in use. • Flas ...

  • NEC 2000 IVS - page 133

    ND -45504 (E) CHAPTER 4 Page 111 Revision 2.0 PN-2DLCC (DLC) PN-2DLCC (DLC) 1. Locations of Lamps, Switc hes and C onnector s PN-2DLCC (DL C) Ca r d 2. Lamp Indica tions 3. Switch Setti ngs This card h as no s witches. Lamp I ndica tion s LAMP NAME COLOR FUNCTION BL 0 , 1 R ed • Remains lit when the corre s pondi ng ci rcuit is in use. • Flashe ...

  • NEC 2000 IVS - page 134

    CHAPTER 4 ND -45504 (E) P age 112 Re vision 2.0 PN-2DLCN (DLC) PN-2DLCN (DLC) 1. Locations of Lamps, Switc hes and C onnector s PN-2DLCN (DL C) Ca r d 2. Lamp Indica tions 3. Switch Setti ngs This card h as no s witches. Lamp I ndica tion s LAMP NAME COLOR FUNCTION BL 0 , 1 Red • Remains lit when the corres ponding ci rcuit is in use. • Flashes ...

  • NEC 2000 IVS - page 135

    ND -45504 (E) CHAPTER 4 Page 113 Revision 2.0 PN-4DLCA (DLC) PN-4DLCA (DLC) 1. Locations of Lamps, Switc hes and C onnector s PN-4DLCA (DL C) Ca r d 2. Lamp Indica tions 3. Switch Setti ngs This card h as no s witches. Lamp I ndica tion s LAMP NAME COLOR FUNCTION BL0 - 3 Red • R emains lit when the corre spondi ng circui t is in us e. • Flashes ...

  • NEC 2000 IVS - page 136

    CHAPTER 4 ND -45504 (E) P age 114 Re vision 2.0 PN-4DLCD (DLC) PN-4DLCD (DLC) 1. Locations of Lamps, Switc hes and C onnector s PN-4DLCD (DL C) Ca r d 2. Lamp Indica tions 3. Switch Setti ngs This card h as no s witches. Lamp I ndica tion s LAMP NAME COLOR FUNCTION BL0-3 Red • Remains l it when t he corre spondi ng cir c uit is i n use • Fl ash ...

  • NEC 2000 IVS - page 137

    ND -45504 (E) CHAPTER 4 Page 115 Revision 2.0 PN-4D LCF ( DLC) PN-4DLCF (DLC) 1. Locations of Lamps, Switc hes and C onnector s PN-4DLCF (DLC) Card 2. Lamp Indica tions 3. Switch Setti ngs This card h as no s witches. Lamp I ndica tion s LAMP NAME COLOR FUNCTION BL0 - 3 Red • R emains lit when the corre spondi ng circui t is in us e. • Flashes ...

  • NEC 2000 IVS - page 138

    CHAPTER 4 ND -45504 (E) P age 116 Re vision 2.0 PN-4DLCM (DLC) PN-4DLCM (DLC) 1. Locations of Lamps, Switc hes and C onnector s PN-4DLCM (DLC) Car d 2. Lamp Indica tions 3. Switch Setti ngs This card h as no s witches. Lamp I ndica tion s LAMP NAME COLOR FUNCTION BL0-3 Red • Re mains lit when the correspondi ng c i rcui t is in us e. • Flashes ...

  • NEC 2000 IVS - page 139

    ND -45504 (E) CHAPTER 4 Page 117 Revision 2.0 PN-4D LCQ ( DLC) PN-4DLCQ (DLC) 1. Locations of Lamps, Switc hes and C onnector s PN-4DLCQ (DLC) Car d 2. Lamp Indica tions 3. Switch Setti ngs This card h as no s witches. Lamp I ndica tion s LAMP NAME COLOR FUNCTION BL0-3 Red • Re mains lit when the correspondi ng c i rcui t is in us e. • Flashes ...

  • NEC 2000 IVS - page 140

    CHAPTER 4 ND -45504 (E) P age 118 Re vision 2.0 PN- 2DPCB (D PC) PN-2DPCB (DPC) 1. Location of Lamps, Switches and Connectors PN-2DPCB (DPC) Card RSC1 SDT1 RDR1 CDI1 RSC0 SDT0 RDR0 CDI0 SW1 SW0 BL1 LB1 1 LB1 2 BL0 LB0 1 LB0 2 XCN 1 XCN 0 RS1 RS0 ...

  • NEC 2000 IVS - page 141

    ND -45504 (E) CHAPTER 4 Page 119 Revision 2.0 PN- 2DPCB (D PC) (2) Lamp Indications La mp Indi cati ons LAMP NAME COLOR FUNCTION BL0 R ed No . 0 C ir c ui t ON: Rea dy for digita l da ta tra nsmis si on or the cir cuit is bu sy . OFF: Fix ed p a th i s not conne c ted. Fl ash (60IP M): Make-b usy s ta te or the system dat a for this card is not as- ...

  • NEC 2000 IVS - page 142

    CHAPTER 4 ND -45504 (E) P age 120 Re vision 2.0 PN- 2DPCB (D PC) (3) Switch Settings The f igure in the S WITCH NAME col um n and the posi tion in in the SETTING POSI TION col- umn indi cate the standar d setti ng of the switch. When the switc h is n ot set as sho wn by t he fi gur e and , the setti ng of the switc h v a ries with the syst em conce ...

  • NEC 2000 IVS - page 143

    ND -45504 (E) CHAPTER 4 Page 121 Revision 2.0 PN-2ILCA (ILC) PN-2 ILC A (IL C) 1. Locations of Lamps, Switc hes, and C onnector s PN-2ILCA (ILC) Card SW 1 ACT0 B20 PAL0 LPB0 ACT 1 B2 1 PAL 1 LPB1 B11 B10 SW0 ...

  • NEC 2000 IVS - page 144

    CHAPTER 4 ND -45504 (E) P age 122 Re vision 2.0 PN-2I LCA (ILC) (2) Lamp Indications Lamp I ndica tion s LAMP NAME COLOR F UNCTION AC T 1 G r e en No . 1 C ir c ui t ON: Normally oper ating. OFF: Not o pe rating. PA L 1 R e d ON: Line is sh ort- circui ti ng. OFF: Nor mally o perating. LPB 1 Red O F F : N o t us ed . B21 Green ON: B2 channe l is in ...

  • NEC 2000 IVS - page 145

    ND -45504 (E) CHAPTER 4 Page 123 Revision 2.0 PN-2ILCA (ILC) (3) Switch Settings The f igure in the S WITCH NAME colum n and the position i n in the SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the switc h v aries with the system concerne d. Switch ...

  • NEC 2000 IVS - page 146

    CHAPTER 4 ND -45504 (E) P age 124 Re vision 2.0 PN-4LCD/4LCD-A (L C) PN-4LCD/4LCD-A (LC) 1. Locations of Lamps, Switc hes and C onnector s PN-4LCD/4LCD-A (LC) Card 2. Lamp Indica tions 3. Switch Setti ngs This card h as no s witches. Lamp In di c at i ons LAMP NAME COLOR FUNCTION BL0-3 Red • Re mains lit when the correspondi ng c i rcui t is in u ...

  • NEC 2000 IVS - page 147

    ND -45504 (E) CHAPTER 4 Page 125 Revision 2.0 PN-4LCJ ( LC) PN -4LC J (LC ) 1. Locations of Lamps, Switc hes and C onnector s PN-4LCJ (LC) Car d 2. Lamp Indica tions 3. Switch Setti ngs This card h as no s witches. Lamp I ndica tion s LAMP NAME COLOR FUNCTION BL0 - 3 Red • R emains lit when the corre spondi ng circui t is in us e. • Flashes at ...

  • NEC 2000 IVS - page 148

    CHAPTER 4 ND -45504 (E) P age 126 Re vision 2.0 PN-M03 (M03) PN-M 03 (M 03) 1. Locations of Lamps, Switc hes and C onnector s PN-M 03 (M03) Card OPRS OP E RS SELCN0 V35 X21 OPER OPSD SW0 SD RD CD ER DR CS SELX21 CN0 JP 1B JP 1A ...

  • NEC 2000 IVS - page 149

    ND -45504 (E) CHAPTER 4 Page 127 Revision 2.0 PN-M03 (M03) (2) Lamp Indications Lamp I ndica tion s LAMP NAME COLOR FUNCTION OP E Gr e en ON: T his c a rd i s normall y connect ed to the P N-2DPCB. OFF: Thi s card is ab normally con nected to the PN -2D PCB . RS Gre en ON: R TS signal is ON. OFF: R TS signal is OFF . SD Green ON: TXD signal is “0 ...

  • NEC 2000 IVS - page 150

    CHAPTER 4 ND -45504 (E) P age 128 Re vision 2.0 PN-M03 (M03) (3) Switch Settings Note: The JP1A and JP1B must be set to the same posi tion e ach othe r . The fi gure in the SWITCH N AME column and the positio n in in t he SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and ...

  • NEC 2000 IVS - page 151

    ND -45504 (E) CHAPTER 4 Page 129 Revision 2.0 PN-2ODT A (ODT) PN-2 ODT A (OD T) 1. Locations of Lamps, Switc hes and C onnector s PN-2ODT A ( ODT) Card 2. Lamp Indica tions 3. Switch Setti ngs This card h as no s witches. Lamp I ndica tion s LAMP NAME COLOR FUNCTION BL 0 , 1 Red • Remains lit when the corres ponding ci rcuit is in use. • Flashe ...

  • NEC 2000 IVS - page 152

    CHAPTER 4 ND -45504 (E) P age 130 Re vision 2.0 PN- 8RST A ( PBR) PN-8RST A ( PBR) 1. Locations of Lamps, Switc hes and C onnector s PN-8RST A (PBR) Ca r d 2. Lamp Indica tions This card h as no i ndicator l a mps. 3. Switch Setti ngs This card h as no s witches. ...

  • NEC 2000 IVS - page 153

    ND -45504 (E) CHAPTER 4 Page 131 Revision 2.0 PN-TNT A (TN T) PN-TNT A (TNT) 1. Location of Lamps, Switches and Connectors PN-TNT A (TNT) Card 2. Lamp Indica tions This card h as no la mp s. SW JACK1 JACK0 ...

  • NEC 2000 IVS - page 154

    CHAPTER 4 ND -45504 (E) P age 132 Re vision 2.0 PN-TNT A (TNT) 3. Switch Setti ngs Switc h Settin g s SWITCH NAME SWITCH NUMBER SETTING POSIT ION F UNCTION CHECK SW (Piano Ke y SW) 1, 2 V o lum e adjus tment for No. 0 circui t 3, 4 V o lum e adjus tment for No. 1 circui t ON 4 3 2 1 OFF SW ITCH NUMBER VOLUM E 12 OFF OFF –10 dB ON OFF –7 dB OFF ...

  • NEC 2000 IVS - page 155

    ND -45504 (E) CHAPTER 4 Page 133 Revision 2.0 PN- 2CSIA (CS I) PN-2 CS IA (C SI ) 1. Locations of Lamps, Swtic hes, and C onnector s. PN-2CSIA (CSI) Card 2. Lamp Indica tions Lamp I ndica tion s LAMP NAME COLOR FUNCTION OPE Green Light s when the corre sp ondi ng cir cuit is in use. LB Red Light s when a loop -back is i n progres s. B13 R e d Not u ...

  • NEC 2000 IVS - page 156

    CHAPTER 4 ND -45504 (E) P age 134 Re vision 2.0 PN- 2CSIA (CS I) 3. Switch Setti ngs The fi gure in the SWITCH N AME column and the positio n in in the SETTING POSITION col- umn indicat e the standa rd setting of the switc h. When the switch is not set as shown by the f igure and , the setting of the swit ch va r ies with the syste m con cerne d. N ...

Manufacturer NEC Category Computer Hardware

Documents that we receive from a manufacturer of a NEC 2000 IVS can be divided into several groups. They are, among others:
- NEC technical drawings
- 2000 IVS manuals
- NEC product data sheets
- information booklets
- or energy labels NEC 2000 IVS
All of them are important, but the most important information from the point of view of use of the device are in the user manual NEC 2000 IVS.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals NEC 2000 IVS, service manual, brief instructions and user manuals NEC 2000 IVS. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product NEC 2000 IVS.

Similar manuals

A complete manual for the device NEC 2000 IVS, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use NEC 2000 IVS by users. Manuals are usually written by a technical writer, but in a language understandable to all users of NEC 2000 IVS.

A complete NEC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual NEC 2000 IVS - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the NEC 2000 IVS, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the NEC 2000 IVS, that we can find in the current document
3. Tips how to use the basic functions of the device NEC 2000 IVS - which should help us in our first steps of using NEC 2000 IVS
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with NEC 2000 IVS
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of NEC 2000 IVS in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning NEC 2000 IVS?

Use the form below

If you did not solve your problem by using a manual NEC 2000 IVS, ask a question using the form below. If a user had a similar problem with NEC 2000 IVS it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)