Manual Epson ELPLL02

31 pages 0.74 mb
Download

Go to site of 31

Summary
  • Epson ELPLL02 - page 1

    9 User ’ s Man ual f or ELPLL02 Long-Focal Length Zoom Lens • This long-focal length zoom lens is designed for use only with EPSON multimedia projectors. • It makes it possible to increase the distance between the projector and the screen. • Please read this manual completely before use to assure maximum per - formance. • Note that illust ...

  • Epson ELPLL02 - page 2

    10 1. Bef ore mounting the zoom lens 1-1 Safety precautions W arning Be sure to scre w the Long-F ocal Length lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you have all t ...

  • Epson ELPLL02 - page 3

    11 2. Mounting the zoom lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations belo w ma y not match your pa ...

  • Epson ELPLL02 - page 4

    12 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws. Be sure that the seal reading “UPPER” is on t ...

  • Epson ELPLL02 - page 5

    13 (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo Be sure to remov e the front lens cap bef ore turning on the power , or it may melt from the heat. 02_LTZL_DTP_E.pm6 01.2.15, 4:20 PM Page 13 Adob ...

  • Epson ELPLL02 - page 6

    15 4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 68.3 to 1 16.2 mm 2. Zoom ratio 1.7 x 3. f number 2.14 to 2.98 4. Projection size 60 to 300 inches 5. Mass 2100 g 4-2 Appearance with zoom lens mounted About 505mm 02_LTZL_DTP_E.pm6 01.2.15, 4:20 PM Page 15 Adobe PageMaker 6.0J/PPC ...

  • Epson ELPLL02 - page 7

    9 User ’ s Manual f or Long Thr ow Zoom Lens ELPLL03 • This long throw zoom lens is designed for use only with EPSON multi- media projectors. • It makes it possible to increase the distance between the projector and the screen. • Please read this manual completely before use to assure maximum per - formance. • Note that illustrations may ...

  • Epson ELPLL02 - page 8

    10 1. Bef ore mounting the zoom lens 1-1 Safety precautions W arning Be sure to screw the Long thro w zoom lens and adapter ring down completely . Unless the y are securely scre wed on, they could f all off and cause damage or injur y (es- pecially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you have all t ...

  • Epson ELPLL02 - page 9

    11 2. Mounting the zoom lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations belo w ma y not match your pa ...

  • Epson ELPLL02 - page 10

    12 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws. Be sure that the seal reading “UPPER” is on t ...

  • Epson ELPLL02 - page 11

    13 (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo Be sure to remov e the front lens cap bef ore turning on the power , or it may melt from the heat. 02_LTZL_DTP_E.pm6 01.2.15, 4:23 PM Page 13 Adob ...

  • Epson ELPLL02 - page 12

    15 4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 144.1 to 194.5mm 2. Zoom ratio 1.35 x 3. f number 2.60 to 3.27 4. Projection size 80 to 300 inches 5. Mass 2100 g 4-2 Appearance with zoom lens mounted About 505mm 02_LTZL_DTP_E.pm6 01.2.15, 4:23 PM Page 15 Adobe PageMaker 6.0J/PPC ...

  • Epson ELPLL02 - page 13

    11 User ’ s Manual f or ELPLR01 Rear Projector wide Lens • This wide-angle lens is designed for use only on EPSON multimedia projectors. • This lens is designed for use only on rear projection and rear projection box systems. • Please read this manual completely before use to assure maximum per - formance. • Note that illustrations may di ...

  • Epson ELPLL02 - page 14

    12 1. Bef ore mounting the wide-angle lens 1-1 Safety precautions W arning Be sure to scre w the Rear Projector wide lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you hav ...

  • Epson ELPLL02 - page 15

    13 2. Mounting the rear -pr ojection wide-angle lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations below ...

  • Epson ELPLL02 - page 16

    14 Rear lens cap (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the rear -pr ojection wide-angle lens (1) Mounting the rear-projection wide-angle lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the rear projector wide lens with ...

  • Epson ELPLL02 - page 17

    15 (2) Adjusting the wide lens f or a rear projector • This lens must be adjusted to match the screen size. Adjust the lens as follows, before installing the front case. 1. T urn the lens shift button to move the lens all the way down. 2. Loosen the 2 focus ring mounting screws by using the hex wrench that came in the same package. 3. Loosen the ...

  • Epson ELPLL02 - page 18

    16 (3) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . 02_RPWL_DTP_E.pm6 01.2.15, 4:17 PM Page 16 Adobe PageMaker 6.0J/PPC ...

  • Epson ELPLL02 - page 19

    18 4. Rear -pr ojection wide-angle lens specifications 4-1 Lens specifications 1. Focal length 27mm 2. f number 2.3 3. Projection size 60 to 100 inches 4. Mass 1600 g 4-2 Appearance with rear pr ojector wide lens mounted About 455mm 02_RPWL_DTP_E.pm6 01.2.15, 4:17 PM Page 18 Adobe PageMaker 6.0J/PPC ...

  • Epson ELPLL02 - page 20

    9 User ’ s Man ual f or ELPLS01 Standar d Lens • This standard lens is designed for use only with EPSON multimedia pro- jectors. • Please read this manual completely before use to assure maximum per - formance. • Note that illustrations may dif fer slightly from your actual product. • Specifications are subject to change without notice. S ...

  • Epson ELPLL02 - page 21

    10 1. Bef ore mounting the standard lens 1-1 Safety precautions W arning Be sure to scre w the Long-F ocal Length lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you have a ...

  • Epson ELPLL02 - page 22

    11 2. Mounting the standar d lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations belo w ma y not match yo ...

  • Epson ELPLL02 - page 23

    12 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the standar d lens (1) Mounting the standard lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the standard lens with the four mounting screws. Be sure that the seal reading “UP- ...

  • Epson ELPLL02 - page 24

    13 (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo Be sure to remov e the front lens cap bef ore turning on the power , or it may melt from the heat. 02_SL_DTP_E.pm6 01.2.15, 4:19 PM Page 13 Adobe ...

  • Epson ELPLL02 - page 25

    15 4. Standar d lens specifications 4-1 Lens specifications 1. Focal length 49.2 to 68.9 mm 2. Zoom ratio 1.4 x 3. f number 1.84 to 2.36 4. Projection size 30 to 300 inches 5. Mass 1300 g 4-2 Appearance with standar d lens mounted About 475mm 02_SL_DTP_E.pm6 01.2.15, 4:19 PM Page 15 Adobe PageMaker 6.0J/PPC ...

  • Epson ELPLL02 - page 26

    9 User's Manual f or the ELPL W01 Wide Zoom Lens • This wide zoom lens is designed for use only with EPSON multimedia projectors. • It makes it possible to decrease the distance between the projector and the screen. • Please read this manual completely before use to assure maximum per - formance. • Note that illustrations may dif fer s ...

  • Epson ELPLL02 - page 27

    10 1. Bef ore mounting the zoom lens 1-1 Safety precautions W arning Be sure to scre w the Long-F ocal Length lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you have all t ...

  • Epson ELPLL02 - page 28

    11 2. Mounting the zoom lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations belo w ma y not match your pa ...

  • Epson ELPLL02 - page 29

    12 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws. Be sure that the seal reading "UPPER" i ...

  • Epson ELPLL02 - page 30

    13 (2) Mounting the front case 1. Set the front case into position and tighten the three screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo • Be sure to remov e the front lens cap be- f ore tur ning on the po wer , or it ma y melt from the heat. • When handling the zoom lens , ta ...

  • Epson ELPLL02 - page 31

    15 4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 37.9 to 45.5 mm 2. Zoom ratio 1.2 x 3. f number 2.34 to 2.65 4. Projection size 60 to 200 inches 5. Mass 2600 g 4-2 Appearance with zoom lens mounted About 480mm 02_STZL_DTP_E.pm6 01.2.15, 4:22 PM Page 15 Adobe PageMaker 6.0J/PPC ...

Manufacturer Epson Category Camera Lens

Documents that we receive from a manufacturer of a Epson ELPLL02 can be divided into several groups. They are, among others:
- Epson technical drawings
- ELPLL02 manuals
- Epson product data sheets
- information booklets
- or energy labels Epson ELPLL02
All of them are important, but the most important information from the point of view of use of the device are in the user manual Epson ELPLL02.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Epson ELPLL02, service manual, brief instructions and user manuals Epson ELPLL02. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Epson ELPLL02.

Similar manuals

A complete manual for the device Epson ELPLL02, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Epson ELPLL02 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Epson ELPLL02.

A complete Epson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Epson ELPLL02 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Epson ELPLL02, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Epson ELPLL02, that we can find in the current document
3. Tips how to use the basic functions of the device Epson ELPLL02 - which should help us in our first steps of using Epson ELPLL02
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Epson ELPLL02
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Epson ELPLL02 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Epson ELPLL02?

Use the form below

If you did not solve your problem by using a manual Epson ELPLL02, ask a question using the form below. If a user had a similar problem with Epson ELPLL02 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)