English dropdown-ico

Manual Ricoh 106

422 pages 7.89 mb
Download

Go to site of 422

Summary
  • Ricoh 106 - page 1

    Spain RICOH ESP AÑA S.A. Avda. Litoral Mar , 12-14, 08005 Barcelona Phone: +34-(0)93-295-7600 Italy RICOH IT ALIA SpA Via della Metallurgia 12, 37139 V erona Phone: +39-(0)45-8181500 Hong Kong RICOH HONG KONG L TD. 23/F ., China Overseas Building, 139, Hennessy Road, W an Chai, Hong Kong Phone: +852-2862-2888 Singapore RICOH ASIA P ACIFIC PTE.L TD ...

  • Ricoh 106 - page 2

    CLASS 1 LASER PRODUCT IN ACCORDANCE WITH IEC 825 LASER KLASSE 1 nach IEC 825 © Copyright 1999, RICOH CO., L TD. Introduction This manual contains detailed instructions on the operation and maintenance of this machine. T o get maximum versatility from this machine, all operators should carefully read and follow the instructions in this manual. Plea ...

  • Ricoh 106 - page 3

    i Safety Inf or mation When using your machine, the following safety pr ecautions should always be followed. Types of w ar nings used in this manual W ARNING Ignoring this warning could cause ser ious inj ury o r e v e n death. CAUTION Ignoring this caution could cause injur y or damage to property . Symbol examples The d d d d d symbol means a sit ...

  • Ricoh 106 - page 4

    ii • Use of controls or adjustment or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. • Only connect the machine to the power source described on the inside of the front cover . • A void multi-wiring. • Do not damage, break or make any modifications to the power cord. Do not pl ...

  • Ricoh 106 - page 5

    iii CAUTION: • Keep the machine away from humidity and dust. A fire or an electric shock might occur . • Do not place the machine on an unstable or tilted surface. If it topples over , it could cause injury . • When you move the machine, unplug the power cord from the wall outlet to avoid fire or electric shock. • When the machine is not be ...

  • Ricoh 106 - page 6

    iv Energy Star program As an Energy Star partner , we have determined that this machine model meets the Energy Star Guide- lines for energy efficiency . The Energy Star Guidelines intend to establish an international energy- saving system for developing and introducing energy-efficient office equipment to deal with environmen- tal issues, such as g ...

  • Ricoh 106 - page 7

    v Contents Safety Information .............................................................................. i Energy Star program .......................................................................... iv Part Names ......................................................................................... x Operation Panel ...................... ...

  • Ricoh 106 - page 8

    vi Installing the Paper Size Indicator ................................................. 21 Selecting the Paper Source ............................................................. 22 Upgrading Memory ............................................................................ 23 3. PRINTING AND SCANNING Setting up ................................. ...

  • Ricoh 106 - page 9

    vii TEL Model ........................................................................... 45 Switcing between F AX Mode and TEL Mode ..................... 46 Receving calls in TEL Mode ................................................ 46 Screening out Unwanted Faxes with Authorized Reception .......... 46 T urning Authorized Reception on/of f ...... ...

  • Ricoh 106 - page 10

    viii 5. COPYING Making a Copy ................................................................................... 69 Making Multiple Copies ..................................................................... 72 Reduction and Enlar gement ............................................................... 73 T o Set the Reduction Factor .............. ...

  • Ricoh 106 - page 11

    ix 8. TECHNIC AL REFERENCE Printing the Help List ......................................................................... 98 Customising Default Settings with the User Parameters .................... 99 Changing the User Parameters ....................................................... 99 User Parameter Switch Summary ........................... ...

  • Ricoh 106 - page 12

    x Part Names Automatic Document Feeder (ADF) Holds up to 10 sheets of paper for automatic feeding. Place originals face down. Document guides Slide the left guide to fit the size of the paper you are feeding. Operation panel Key panel for controlling the machine. Upper paper tray Holds up to 100 sheets of plain paper . Original guide Guides the ori ...

  • Ricoh 106 - page 13

    xi GENERAL DESCRIPTION Upper tray extension Extend to support originals. Document output tray Scanned documents are delivered here. Power socket Small size paper feed access panel Second (A dd itional) Printer port Y ou can connect a second printer to this port. Computer port Connect your computer here. SIMM cover Open this cover when you want to i ...

  • Ricoh 106 - page 14

    xii <General> 1 1 1 1 1 Display Messages and prompts appear here. 2 2 2 2 2 Fax/Copy key Press to switch between fax operation mode and copy operation mode. The indicators to the left of this key show which mode the machine is currently in. 3 3 3 3 3 Numeric keypad Use these keys to enter the number of copies, dial a fax number or specify val ...

  • Ricoh 106 - page 15

    xiii GENERAL DESCRIPTION 0 0 0 0 0 Zoom keys In copy mode, press these keys to fine-tune the preset reduction and enlargement ratios. Also use to select function settings and navigate the function menus. A A A A A OK key Press to enter values or execute an operation when prompted by a message on the display . B B B B B Original T ype Select key Pre ...

  • Ricoh 106 - page 16

    xiv J J J J J Paper Select key Press to select the copy paper size. When the optional paper feed unit is installed, press to switch between paper sources. <Faxing> K K K K K Receive File indicator Lights to let you know there is received fax data in memory that could not be printed for some reason. ☛ Substitute Reception, page 45. L L L L L ...

  • Ricoh 106 - page 17

    xv GENERAL DESCRIPTION <Printing> Q Q Q Q Q Second Printer key Press this key to select between printing to this machine (indicator off), and printing to a second printer connected to the machine (indicator on). O P N ...

  • Ricoh 106 - page 18

    xvi This page is intentionally blank ...

  • Ricoh 106 - page 19

    1 1. SETTING UP 1. SETTING UP P ackage Contents Make sur e that all of the items shown in the P ackage Contents sheet that comes with the machine are included. W ARNING Make sure the wall outlet is near the machine and freely accessible so that in event of an emergency it can be unplugged easily . Do not put any metal objects or containers holding ...

  • Ricoh 106 - page 20

    2 SETTING UP Installing the Starter T oner Cassette Handle 1 1 Raise the document trap. 2 Lift up the tabs located on the sides of the machine and open the front unit. 2 Hold the starter toner cassette by its handle, and remove it from its vinyl bag. C A UTION Keep all plastic bags out of the reach of chil- dren. Important! Be sur e to hold the sta ...

  • Ricoh 106 - page 21

    3 SETTING UP 1. SETTING UP 5 Make sure the plastic pins (marked with “ * ” in the illustration next to step 3 ) on either side of the starter toner cas- sette slide along the guides inside the machine. Note Be sur e to hold the starter toner cassette by its handle. 6 T o close the front unit, press down firmly but gently on both sides of it unt ...

  • Ricoh 106 - page 22

    4 SETTING UP Installing Other Hardw are Remo ving the Protectiv e Sheet 1 Open the ADF cover ( 1 ) and then re- move the protective sheet ( 2 ). 2 Close the ADF cover and make sure it locks securely into place. Installing the Upper P a per Tray 1 Look at the rear of the machine and note the locations of the slots for in- sertion of the upper paper ...

  • Ricoh 106 - page 23

    5 SETTING UP 1. SETTING UP Preparing the Output T ray 1 Pull out the output tray extension as shown. ...

  • Ricoh 106 - page 24

    6 SETTING UP Connecting to a Computer Important! Make sur e that the power of both the machine and your computer is turned off befor e making the connection. 1 Plug one end of the provided parallel cable into the lower port on the side of the machine, and secure it in place as shown in the illustration. Note • The machine must be connected to a c ...

  • Ricoh 106 - page 25

    7 SETTING UP 1. SETTING UP Choosing Where Pr inted Output is Deliver ed Where pr inted output is deliver ed depends on the position of the ADF . <Position A> When the ADF is in the lower position, copies, prints and incoming faxes are delivered face- up at the lower output slot. Sheets stack in reverse order . <Position B> When the ADF ...

  • Ricoh 106 - page 26

    8 SETTING UP Connecting the T elephone Line and Op- tional T elephone Handset Ther e are two similar sockets located at the r ear of the machine. • LINE – the telephone line connection • TEL – for an optional handset when sharing the line with a telephone 1 Plug the line cable into the LINE socket at the rear of the machine. 2 Connect the o ...

  • Ricoh 106 - page 27

    9 SETTING UP 1. SETTING UP 1 Attach the power cable to the machine and plug the other end into an outlet. 2 T urn on the machine. Note Y ou can select your pr eferr ed language used on the operation panel and on r eports. ☛ Selecting the Language, see page 104. W ARNING • Only connect the machine to the power source described on the inside of t ...

  • Ricoh 106 - page 28

    10 2. GETTING ACQUAINTED Important! ☛ The default display language is English. For how to change to your pr eferred language, see page 104. Paper and Other Media The machine supports printing on the following types of paper/media fr om the upper paper tray . Refer to the follo wing pages for details. Paper/Media type (Paper size) Display Page A4 ...

  • Ricoh 106 - page 29

    11 GETTING ACQUAINTED 2. GETTING ACQUAINTED Loading P a per After you have set up the machine you need to load paper then specify the paper size using the procedur e below . Important! When loading paper into the upper paper tray , do not load mor e than 100 sheets of plain paper (80 g/m 2 or 20 lb). Overloading the upper paper tray can cause misfe ...

  • Ricoh 106 - page 30

    12 GETTING ACQUAINTED 5 Press . 6 Press . 7 Press . 61 Tray Pap.Size Prt Help List Note If the paper feed unit (option) is installed, r efer to page 19 for details on how to specify the paper size. 9 Press . Then press or until the correct paper size appears. 10 When the correct paper size is on the dis- play , press . If the paper feed unit (optio ...

  • Ricoh 106 - page 31

    13 GETTING ACQUAINTED 2. GETTING ACQUAINTED Loading Small Size P a per Note W e r ecommend that you always feed small size paper vertically with the shorter edge feeding into the machine first. 1 Remove all paper before loading small size paper in the upper paper tray . 2 Open the small size paper feed access panel on the back of the machine by unl ...

  • Ricoh 106 - page 32

    14 GETTING ACQUAINTED 5 Press . 6 Press . 7 Press . 61 Tray Pap.Size Prt Help List Note If the paper feed unit (option) is installed, r efer to page 19 for details on how to specify the paper size. 8 Press . 9 Press . Then press or until the correct paper size appears. 10 When the correct paper size is on the display , press . Registered A5 : ? Tra ...

  • Ricoh 106 - page 33

    15 GETTING ACQUAINTED 2. GETTING ACQUAINTED Loading Other Media U se the following procedur es to load envelopes, transparencies, and label paper . Loading En velopes Load up to 5 envelopes at a time using the same procedur e for loading small size paper on page 13. • Insert envelopes print side up with the stamp position as shown. • Envelope f ...

  • Ricoh 106 - page 34

    16 GETTING ACQUAINTED Second (Additional) Printer This machine featur es a port for connecting a second printer . When con- nected, pr ess the key to switch between the two printers. Note Make sur e that the power of your computer is turned off before making the con- nection. Connecting to a Second Printer 1 T urn off both the machine and your sec- ...

  • Ricoh 106 - page 35

    17 GETTING ACQUAINTED 2. GETTING ACQUAINTED P a per Feed Unit (Option) This section describes how to install the paper feed unit (option) and ho w to load paper in it. Addition of a paper feed unit pr ovides you with a second paper source that holds up to 250 sheets of A4 or Letter siz e paper . Important! Make sur e that machine power is turned of ...

  • Ricoh 106 - page 36

    18 GETTING ACQUAINTED 3 The machine has handholds at the lo- cations shown in the illustration. Note that the illustration shows the machine as viewed from above. 4 Carefully lower the machine onto the paper feed unit, making sure that the dowels on the paper feed unit fit into holes in the bottom of the machine properly . CAUTION When lifting the ...

  • Ricoh 106 - page 37

    19 GETTING ACQUAINTED 2. GETTING ACQUAINTED Loading Paper into the P a per F eed Unit Y ou can load either A4 or Letter size paper into the paper feed unit. Refer to page 20 for details on ho w to change the positions of the paper guides inside of the tray to match the type of paper you ar e using. 3 Up to 250 sheets of plain paper (80 g/m 2 or 20 ...

  • Ricoh 106 - page 38

    20 GETTING ACQUAINTED Chang ing the P a per Size U se the following pr ocedure to set the positions of the paper guides inside the paper tray for either A4 or Letter paper . 1 Squeezing in on both sides of the front guide, slide it to the correct position for the desired paper size. 2 Squeezing in on both sides of the side guide, slide it to the co ...

  • Ricoh 106 - page 39

    21 GETTING ACQUAINTED 2. GETTING ACQUAINTED Lower Tray? O K Registered 5 Press . Then press or until the correct paper size appears. 6 When the correct size is on the display , press . 7 Press to return to the standby display . Note The actual message that appears on the ma- chine's display depends on the paper sour ce you last used. If " ...

  • Ricoh 106 - page 40

    22 GETTING ACQUAINTED Selecting the P a per Source 100% U 01 100% L 01 1 Press until the desired pa- per source appears. The upper paper tray is selected when "U" is on the display , and the paper feed unit is selected when "L" is on the display . ...

  • Ricoh 106 - page 41

    23 GETTING ACQUAINTED 2. GETTING ACQUAINTED Upgrading Memor y Y ou can install a Single I nline Memory Module (SIMM) to upgrade the on- boar d memor y of the machine. The machine is shipped from the factory with a 4MB SIMM which can be r eplaced with an 8MB, 16MB or 32MB SIMM. U se the follo wing procedure to install an 8MB, 16MB or 32MB SIMM. Note ...

  • Ricoh 106 - page 42

    24 GETTING ACQUAINTED SIMM 4 Carefully lift out the currently installed SIMM board. 5 Angle the new SIMM board as shown in the illustration, and insert it down into the slot. Gently rock it back and forth until you hear it snap into place. Important! Make sur e the SIMM board is oriented cor - r ectly when you insert it into the slot. 6 Make sure t ...

  • Ricoh 106 - page 43

    25 3. PRINTING AND SCANNING 3. PRINTING AND SCANNING When connected to a compatible PC, you can use this machine as a high performance laser printer and black and white scanner . Important! • Make sure that your PC parallel port is set to ECP . If it is not, please consult your PC manual on how to change it. Note • For information on PC har dwa ...

  • Ricoh 106 - page 44

    26 PRINTINGAND SCANNING 4 Do one of the following according to your operating system: • Windows ® 95/98 Run the setup application. For example, if your CD-ROM is assigned to D, run “D:Scan- inSetup.exe”. • Windows ® 3.1 First copy the disk images under the directory named “3.1” on the CD-ROM to floppy disks. Then insert the first fl ...

  • Ricoh 106 - page 45

    27 PRINTINGAND SCANNING 3. PRINTING AND SCANNING Features Y ou Can Access From the Printer Driver Printer Driver Contents ■ Paper Defaults Paper size : Size, Measurement Unit Page orientation : Portrait, Landscape Output : Copies, Print in reverse order Paper source : Source About ■ N-Up Printing Select a Layout Option : Normal, Reduce for N-up ...

  • Ricoh 106 - page 46

    28 PRINTINGAND SCANNING Using the Second Pr inter (Additional Printer) U se the following pr ocedure to switch betw een this machine and a second printer when a second printer is connected. Important! If the second printer has a bi-dir ectional mode, make sure you turn it off. ☛ Refer to page 15 for details on connecting a second printer . Pr int ...

  • Ricoh 106 - page 47

    29 4. F AXING 4. FAXING Y our machine is furnished with superior faxing capabilities and wide a range of powerful fax featur es. Her e are some of the things you can do: • Send and receive fax messages • Store fax numbers you often use and recall them with a single key press • Redial the previous fax number • Share your fax line with a tele ...

  • Ricoh 106 - page 48

    30 F AXING Enter ing Characters on the Operation Panel Enter ing Numbers Enter digits when dialling inputting or fax numbers, specifying function codes, or register ing various information, such as your o wn fax number . T o enter digits - , pr ess the appropriate key on the numer ic keypad. E.g. to enter the number 12345678, pr ess 12345678 ☛ En ...

  • Ricoh 106 - page 49

    31 F AXING 4. F AXING Note Some special characters in lower case appear identical in upper case on the display due to space limitations. These characters ar e printed correctly on lists and r eports. Deleting Characters and Moving the Cursor When entering names and storing numbers: • T o delete the character to the left of the cursor , pr ess . N ...

  • Ricoh 106 - page 50

    32 F AXING Setting up Please Read This First Before y ou can send or receive fax es you must connect the machine to a telephone line and stor e the following settings: ☛ Own Name/TTI, see page 33. ☛ Dial Mode, see page 34. ☛ Own Fax Number , see page 36. ☛ Date and T ime see page 38. In addition, you may wish to adjust the following: ☛ Se ...

  • Ricoh 106 - page 51

    33 F AXING 4. F AXING Stor ing y our Own Name/TTI S tore y our name or name of your organisation. When you send a fax, this identification appears at the top of the page when printed at the other end. I t is also shown on the other party ’ s display during communication. I t can be up to 32 characters long. ☛ Entering Characters on the Operatio ...

  • Ricoh 106 - page 52

    34 F AXING 6 Press . The display opposite will flash briefly on the display and then the function menu will reappear . Note Do not carry out any operations while “Reg- ister ed” appears on the display . 7 Do one of the following: • Enter another function number . • Press to return to standby mode. 1 Press . 2 Press . 3 Press . 4 Press . 5 P ...

  • Ricoh 106 - page 53

    35 F AXING 4. F AXING 6 Press . • If the display opposite does not appear , press to finish. 7 Press or to select whether your fax machine is behind a P ABX. 8 Press . • If you chose “No” in step 7 , proceed to step 12 . • If you chose “Y es”, proceed to step 9 . 9 Enter the digit or digits that give you an outside dial tone on the nu ...

  • Ricoh 106 - page 54

    36 F AXING 12 Press . The display opposite will flash briefly on the display and then the function menu will reappear . Note Do not carry out any operations while “Reg- ister ed” appears on the display . 13 Do one of the following: • Enter another function number . • Press Help/Function to return to standby mode. Prt Help List Function no.: ...

  • Ricoh 106 - page 55

    37 F AXING 4. F AXING 3 Press . 4 Press . 5 Enter your own fax number on the numeric keypad. E.g. press Note T o clear the entir e setting, make sur e the cursor is at the far left position then pr ess . The display opposite will appear . Pr ess to clear the setting, or pr ess to cancel this operation. 6 Press . Note Do not carry out any operations ...

  • Ricoh 106 - page 56

    38 F AXING 4 Press . 5 Press . 6 Enter the year on the numeric keypad. E.g. to enter the year 2000, press . 7 Press . 8 Enter the month on the numeric keypad. E.g. press . Month: 05 O K Month: 02 O K Year: 00 O K Time: 01:13 O K Year: 99 O K Setting the Date and Time This is printed on r eports to help you keep track of machine usage. • If you ma ...

  • Ricoh 106 - page 57

    39 F AXING 4. F AXING Day: 23 O K Registered 1 Set up O K 9 Press . 10 Enter the date on the numeric keypad. E.g. press . 11 Press . The display opposite will flash briefly on the display and then the function menu will reappear . Note Do not carry out any operations while “Reg- ister ed” appears on the display . 12 Do one of the following: • ...

  • Ricoh 106 - page 58

    40 F AXING Dial number Sending F axes Ho w to Send a Fax This is the basic procedur e for sending a fax message. F or detailed informa- tion and explanations of the advanced featur es available, see the following pages: ☛ Economy Mode, see page 105. ☛ Quick Dials, see page 53. ☛ Name Dials, see page 58. ☛ Redialling a Number , see page 43. ...

  • Ricoh 106 - page 59

    41 F AXING 4. F AXING 12345678_ B: XYZ CO. ABC CO. 4 Adjust the scan settings if necessary . • E.g. if your document is a photograph, press the Original T ype Select key twice to select Photo 1. Setting Use for: [T ext] Standard text [T ext Fine] Detail text [Photo1] Photographs [Photo2] Mixed text and photographs ☛ T o select the Resolution/Ph ...

  • Ricoh 106 - page 60

    42 F AXING 001- T o enter a pause in a fax number , press . The pause is shown on the display as a “-” character . ● Entering T ones Some organisations offer you special services by telephone which y ou can access using T ouch T one or DTMF tones. T o enter a tone, press the or keys. ☛ Setting the Dial Mode, see page 34. Enter ing P auses a ...

  • Ricoh 106 - page 61

    43 F AXING 4. F AXING Redialling a Number The machine remembers the last fax or telephone number dialled with the numeric keys, a Quick D ial or a N ame D ial. T o redial a fax number , follow the procedure belo w . Note • If you dialled the last number with a Quick Dial or Name Dial, the number will be displayed instead of the stor ed label. • ...

  • Ricoh 106 - page 62

    44 F AXING Cancelling T ransmission of a Fax T o cancel a fax transmission while dialling or during transmission, pr ess the S top key and r emove your document. Trans. canceled Note Once a connection has been established and transmission has begun, you cannot cancel transmission of data alr eady sent. ...

  • Ricoh 106 - page 63

    45 F AXING 4. F AXING Receiving F axes Choosing a Reception Mode This machine has two r eception modes: • FAX mode • TEL mode ● F AX Mode In this mode the machine automatically answers incoming calls. When a call is receiv ed, the machine rings a few times to alert y ou that a message is being sent, then starts receiving and printing the mess ...

  • Ricoh 106 - page 64

    46 F AXING ● Receiving calls in TEL Mode When the machine is switched to TEL mode, follow these steps to answ er incoming calls. Connecting ... Telephone call 1 When the machine rings, press or lift the handset and listen. • If you hear a voice and you lifted the habdset, continue the conversation as normal and replace the handset when finished ...

  • Ricoh 106 - page 65

    47 F AXING 4. F AXING When a fax message comes in, the machine checks to see if the sender ’ s fax number is stor ed in any of the Quick Dials or N ame Dials. If it is found and you have used that Quick D ial or N ame Dial to send at least one message to that destination, the message is accepted. Note Y ou can stor e up to 30 Specified Senders (2 ...

  • Ricoh 106 - page 66

    48 F AXING 6 Press . The display opposite will flash briefly on the display and then the function menu will reappear . Note Do not carry out any operations while “Reg- ister ed” appears on the display . 7 Do one of the following. • Enter another function number . • Press to return to standby mode. Recep. canceled Cancelling Reception of a F ...

  • Ricoh 106 - page 67

    49 F AXING 4. F AXING Making T elephone Calls If you connect an optional telephone handset, y ou can use the same line for both telephone calls and fax messages. Note If you wish to be able to r eceive telephone calls, be sur e to select TEL mode. ☛ Choosing a Reception Mode, see page 45. 1 Do one of the following: • Pick up the telephone hands ...

  • Ricoh 106 - page 68

    50 F AXING 2 Listen to the line. • If a voice answers, continue your conversation as normal. • When you wish to send a fax, listen for the fax tone of the other party , then continue from step 3 below . • When you wish to receive a fax, listen for the fax tone of the other party , then continue from step 5 below . ● Sending a Fax during a T ...

  • Ricoh 106 - page 69

    51 F AXING 4. F AXING Monitor ing the Line while Dialling with On Hook This feature lets y ou dial a telephone number without lifting the optional external handset. Y ou can listen to what is happening on the line through the machine ’ s internal speaker . Dial/Set orig. Dial number 12345 Dial/Set orig. 1 If necessary , press to switch to fax ope ...

  • Ricoh 106 - page 70

    52 F AXING 1 Press . 2 Press . 3 Press . 4 Press . 5 Press or to turn Remote Change on or off. 6 Press and do one of the follow- ing: • If you turned Remote Change on, go to step 7 . • If you turned Remote Change off, go to step 8 . 7 Press a digit on the numeric keypad to select the Remote Change digit. E.g. press . 8 Press . The display oppos ...

  • Ricoh 106 - page 71

    F AXING 4. F AXING 53 Stor ing F ax and T elephone Number s This machine provides two useful methods for stor ing fax and telephone numbers: • Quick Dials • Name Dials Note The maximum length of a fax number you can dial, or store in Quick Dials/Name Dials, is 40 digits. Quick Dials If you often dial certain numbers, you can save time and effor ...

  • Ricoh 106 - page 72

    54 F AXING ● Storing Quick Dials ☛ Entering Characters on the Operation Panel, see page xiv . ☛ Entering Pauses and T ones in Fax Numbers, see page 42. Function no.: _ _ B: Printing... 123456789 Prt Help List 1 Press . 2 Press . 3 Press . 4 Press . 5 T o select a Quick Dial, press a Quick Dial key . E.g. press to select Quick dial ( ). Note T ...

  • Ricoh 106 - page 73

    F AXING 4. F AXING 55 7 Press . 8 Enter or edit the name for this Quick Dial. E.g. press 9 Press . Note Do not turn off the machine while “Please wait” or “Register ed” is shown on the op- eration panel display . 10 Do one of the following: • T o store another Quick Dial, go back to step 5 . • T o return to standby mode, press twice. ? ...

  • Ricoh 106 - page 74

    56 F AXING 4 Press . 5 Press the Quick Dial key you wish to edit. 111 234567989 12 3 456789 120 3 456789 Print List Blink Press Quick or B: A XYZ Registered Print List Blink Press Quick or 1 2 3456789 2 3456789 B: X YZ 6 Press twice then press . Note T o clear the Lefrmost digit, pr ess . Then pr ess . 7 Press . 8 Edit the name stored in this Quick ...

  • Ricoh 106 - page 75

    F AXING 4. F AXING 57 ● Clearing Quick Dials 1 Press . 2 Press . 3 Press . 4 Press . 5 Press the Quick Dial key you wish to delete. E.g. press to select Quick dial ( ). 6 Press . Note If you do not wish to clear this Quick Dial, pr ess twice to r eturn to standby mode. 7 Press . 8 Press twice to return to standby mode. Prt Help List Function no.: ...

  • Ricoh 106 - page 76

    58 F AXING Name Dials N ame Dials are a handy way of stor ing fax numbers that y ou dial r egularly in machine memory . When you store a number in a N ame Dial, you must also give it a name up to 10 characters long. When dialling, you enter the first letter of this name to quickly find the N ame Dial you r equire. Y ou can store multiple N ame Dial ...

  • Ricoh 106 - page 77

    F AXING 4. F AXING 59 6 Enter the fax number you wish to store with the numeric keypad. E.g. press 7 Press . 8 Enter or edit the name for this Name Dial. E.g. press 9 Press . Note • Do not turn off the machine while “Please wait” or “Register ed” is shown on the op- eration panel display . • If a Name Dial with the same name is al- r ea ...

  • Ricoh 106 - page 78

    60 F AXING Delete? O K Select letter Marty Delete? O K Function no.: _ _ Delete? 14 Name Dial O K ● Deleting Name Dials 1 Press . 2 Press . 3 Press . 4 Press . 5 Press . 6 Enter the first letter of the Name Dial label. E.g. press . • If Name Dial you are looking for does not ap- pear , keep pressing the key until it does. E.g. press again Note ...

  • Ricoh 106 - page 79

    F AXING 4. F AXING 61 • T o cancel this operation, press ei- ther enter another function number , or press to return to standby mode. 9 Do one of the following. • T o delete another Name Dial, go to step 5 . • T o return to standby mode, press twice. • T o access another function, press once and enter another function number . Select letter ...

  • Ricoh 106 - page 80

    62 F AXING Reports and Lists Pr inting the Journal The J ournal is a r ecord of fax messages that w ere r ecently sent or received by your machine. B y default, it is printed automatically after every 35 commu- nications. Y ou can print it out whenever you wish to check on machine usage, or to find out if a communication was successful or not. The ...

  • Ricoh 106 - page 81

    F AXING 4. F AXING 63 Printing the Dial List P rint this list to check on the names and numbers of Quick D ials and Name Dials stor ed in the machine. Y ou can print the Dial list using the pr ocedure belo w , or when storing Quick Dials. The following items ar e included on the D ial List: • Own name—this machine’ s Own name/TTI identificati ...

  • Ricoh 106 - page 82

    64 F AXING • Duration—how long the communication lasted • Result—whether the transmission was successful ☛ T o turn automatic printing of this r eport on or off, see Customising Default Set- tings with the User Parameters, see page 100. Err or Repor t B y default, this report is printed automatically if a r eception or transmis- sion fail ...

  • Ricoh 106 - page 83

    F AXING 4. F AXING 65 Adv anced Features Making Machine Sounds Louder or Quieter This machine makes various sounds during operation. Y ou can adjust the vol- ume of these sounds, or turn them off completely accor ding to y our taste. Y ou can change the following: • TX—the sound of a fax being sent • RX—the sound of a fax being received • ...

  • Ricoh 106 - page 84

    66 F AXING Registered 3 FaxSwitch O K 22 Slow(4800bps) 4800bps: No? O K Prt Help List Function no.: _ _ 7 Repeat steps 5 and 6 for all adjust- able volumes. After adjusting the Ring volume and pressing , the display opposite will appear . Now go to step 8 . Note Do not turn off the machine while “Please wait” or “Register ed” is shown on th ...

  • Ricoh 106 - page 85

    F AXING 4. F AXING 67 4800bps: Yes? O K Registered 2 Communication O K 5 Press or to adjust the setting. 6 Press . The display opposite will flash briefly on the display and then the function menu will reappear . Note Do not carry out any operations while “Reg- ister ed” appears on the display . 7 Do one of the following: • Enter another func ...

  • Ricoh 106 - page 86

    68 F AXING 51 Select O K Function no.: _ _ Mode: Off? O K Mode: On? O K Summer Time O K Registered 5 Select O K Prt Help List 1 Press . 2 Press . 3 Press . 4 Press . 5 Press or until the setting you wish to change appears on the display . E.g. press once. 6 Press . 7 Press or to adjust the change. 8 Press . The display opposite will flash briefly o ...

  • Ricoh 106 - page 87

    69 5. COPYING 5. COPYING Making a Cop y Y ou can load up to 10 sheets of plain paper (80 g/m 2 or 20 lb) at a time into the Automatic D ocument Feeder (ADF). Important! Check to make sur e that the ADF cover is secur ely closed befor e using it. 1 Fan the stack of originals. Never try to place more than 10 sheets of plain pa- per onto the ADF . 2 S ...

  • Ricoh 106 - page 88

    70 COPYING 3 Carefully insert the document stack face-down into the ADF . Note The side of the original to be copied should be face down. 4 Insert the stack of originals along the document guide into the ADF . Note Insert your stack of originals into the ADF until it stops. If you do not push it right in, the machine will not detect the stack. 5 Ma ...

  • Ricoh 106 - page 89

    71 COPYING 5. COPYING Originals that do not meet the follo wing requirements can cause paper misfeeds, and even damage the machine. ■ Requirements • Thickness 0.05mm to 0.2mm (0.002" to 0.08") • Weight 60 to 90 g/m 2 (16lb to 24lb) • Clear markings Markings on the originals must be clear to be read correctly . • Uniform page siz ...

  • Ricoh 106 - page 90

    72 COPYING Making Multiple Copies 1 Carefully insert the document stack face-down into the ADF . 2 Enter the number of copies you wish to make using the numeric keypad. E.g. to make ten copies, press . Note If your document is not scanned in even when you pr ess , ther e is a chance it is not set corr ectly in the ADF . Reset your document and try ...

  • Ricoh 106 - page 91

    73 COPYING 5. COPYING Reduction and Enlargement P r ess or to select preset reduction or enlargement factors for the copy operation. T o Set the Reduction F actor 1 Carefully insert the document stack face-down into the ADF . 2 Press until the desired size ra- tio appears. The sizes change in the fol- lowing order . 100% → 93% → 87% → 82% 50% ...

  • Ricoh 106 - page 92

    74 COPYING Ratio (%) Original ➝ Paper size 1 15 B5 ➝ A4, B6 ➝ A5 122 A5 ➝ B5 141 A5 ➝ A4 200 A6 ➝ A4 1 Carefully insert the document stack face-down into the ADF . 2 Press until the desired size ratio appears. The sizes change in the fol- lowing order . 100% → 115% → 122% 200% ← “141% A5 A4” 3 Press to perform the copy opera- ...

  • Ricoh 106 - page 93

    75 COPYING 5. COPYING Zoom (In 1% Increments) Zoom allows y ou to tune the pr eset reduction and enlargement factors to ex- actly the value you want. Y ou can change the zoom factor in increments of 1%. T o Use Zoom 1 Carefully insert the document stack face-down into the ADF . 2 Press (decrease) or (increase) until the desired size ratio appears. ...

  • Ricoh 106 - page 94

    76 COPYING Adjusting the Cop y Image T o Select the Resolution/Photo Setting 1 Carefully insert the document stack face-down into the ADF . 4 Press to perform the copy opera- tion. Note After copying finishes, pr ess to clear any settings. Choose a setting that matches your original: Setting Use for: [T ext Fine] Copying text [Photo1] Copying photo ...

  • Ricoh 106 - page 95

    77 COPYING 5. COPYING T o Adjust the Image Density 1 Carefully insert the document stack face-down into the ADF . 3 Press to perform the copy opera- tion. Note After copying finishes, pr ess to clear any settings. 2 Press the Density key to select the im- age density . • Select [Lighter] to make the image lighter . • Select [Darker] to make the ...

  • Ricoh 106 - page 96

    78 COPYING Sor ting Output The following example sho ws how output is affected by tur ning sorting on and off. Important! The sort operation r equires scanning of all your originals into memory befor e starting the copy operation. The number of originals that can be scanned at one time depends on how much memory you have installed. Refer to page 23 ...

  • Ricoh 106 - page 97

    79 COPYING 5. COPYING 3 When you press to start the copy operation, all of the originals on the ADF are scanned into memory before they are printed. Note After copying finishes, pr ess to clear any settings. ...

  • Ricoh 106 - page 98

    80 6. TROUBLESHOOTING General Status Nothing happens when the machine is turned on. Paper misfeeds when the machine is turned on for the first time after the installation. After installing a SIMM board, the memory value that appears on the machine's display does not match the amount of memory in- stalled. Cause Power cord is not con- nected. S ...

  • Ricoh 106 - page 99

    81 TROUBLESHOOTING 6. TROUBLE- SHOOTING Printing Status Frequent paper mis- feeds. Part of the image is unclear . Black lines on the printout. Dark areas along the sides of the printout. Printing and Copying ( 2 / 2 ) Page p.11,19 p.15 p.15 p.94 p.94 p.94 Status Abnormal or unex- pected printing results. Parts of the image are not printed out. Cann ...

  • Ricoh 106 - page 100

    82 TROUBLESHOOTING Page p.39,69 p.39,69 p.39,69 p.70 p.69 p.39,69 p94 p.93 p.78 p.76 p.11,13,19 p.9 p.32 p.34 Status Frequent original mis- feeds with ADF . Original is not fed from the ADF . Periodic black marks on printed output. Black and white lines on printed output when using the ADF . Output too light. Unclear photographic images. Parts of t ...

  • Ricoh 106 - page 101

    83 TROUBLESHOOTING 6. TROUBLE- SHOOTING Copying and Faxing (2/2) Remedy Press the Fax/Copy key to switch to fax operation mode. Fax reception is not possible while the machine is processing or printing PC print data. Fax reception is not possible while making copies. Load more paper . If small size paper is loaded, load A4 size paper so you can rec ...

  • Ricoh 106 - page 102

    84 TROUBLESHOOTING Error Messages ( 1 / 3 ) The table below explains the error messages that may appear on the display and the appropriate action to take. Message “Close cover” “Add paper” “T oner near end” “Add T oner” “Clear paper” “Memory overflow” “Remove original” (when original is set in ADF) “Memory full” and ...

  • Ricoh 106 - page 103

    85 TROUBLESHOOTING 6. TROUBLE- SHOOTING Message Cause Remedy Error Messages ( 2 / 3 ) Page — P .61 P .51 P. 8 — — P .58 — Press to clear the error message. Delete some Name Dials or enter a shorter number . If scanning from the exposure glass, press and remove your document. When scanning from the ADF , the machine will automatically enter ...

  • Ricoh 106 - page 104

    86 TROUBLESHOOTING If you have a pr oblem with the machine and you cannot resolve it by r eferring to the information in this chapter , please contact your service repr esentative. If an “Err or XX” message is displayed, be sur e to turn off the machine befor e calling. Message Cause Page Error Messages ( 3 / 3 ) Remedy “Check fax no.” and ...

  • Ricoh 106 - page 105

    87 TROUBLESHOOTING 6. TROUBLE- SHOOTING When the Receiv e File Indicator is Lit This indicator lights to inform you that a page of an incoming fax message could not be printed for some r eason (e.g. paper has run out) and that page has been stored in memory . Important! The machine cannot r eceive any more messages until you solve the pr oblem. T u ...

  • Ricoh 106 - page 106

    88 TROUBLESHOOTING Clearing a Paper Misfeed This section describes ho w to clear a paper misfeed when one occurs. CAUTION When removing misfed paper , do not touch the fusing section because it could be very hot. Important! Hold a misfed sheet with both hands and slowly pull it out. Do not use a tool, such as a scr ewdriver or tweezers as this may ...

  • Ricoh 106 - page 107

    89 TROUBLESHOOTING 6. TROUBLE- SHOOTING 3 Push back the blue paper release lever located on the right. Note The lever r eleases pr essure on the paper . If you do not push it back, you could damage the machine when r emoving paper . 4 Pull out the misfed paper in the direc- tions indicated by the arrows in the il- lustrations. Note • If you ar e ...

  • Ricoh 106 - page 108

    90 TROUBLESHOOTING Clearing a Misfeed in the ADF 1 Open the ADF cover . Note Be sur e to open the ADF cover befor e pulling out the misfed original. Failur e to do so can r esult in damage to the original. 2 Pull out the misfed original. 3 Close the ADF cover , and make sure it locks securely into place. Important! If copying was in pr ogress, be s ...

  • Ricoh 106 - page 109

    91 TROUBLESHOOTING 6. TROUBLE- SHOOTING T ip If you cannot find a remedy for unexpected printout results here, check the printer driver's online help for other useful information. When Paper Will Not F eed If paper has completely stopped feeding, check using the following pr oce- dure. 1 Remove all paper . 2 1 Raise the document trap. 2 Lift u ...

  • Ricoh 106 - page 110

    92 TROUBLESHOOTING 4 Pull the blue key-shaped pawl located deep inside on the right where the toner cassette was set forward. 5 Install the toner cassette into the ma- chine. 6 Close the front unit. When the front unit is closed, the mo- tor will start running. When the sound of the motor stops, set paper in the original position and continue with ...

  • Ricoh 106 - page 111

    93 7. USER MAIN- TENANCE 7. USER MAINTENANCE Daily Maintenance Clean with a damp cloth and wipe dry . Note T urn off the machine befor e cleaning ADF Lower output slot Output bin ...

  • Ricoh 106 - page 112

    94 USER MAINTENANCE Replacing the T oner Cassette And the Cleaning P ad P rinting on A4 size paper under the recommended temperatur e and hu- midity conditions noted in the table under “Environment ” on page 1, you can expect a toner cassette to print appro ximately 3,000 pages when you are printing typical business letters that hav e text cove ...

  • Ricoh 106 - page 113

    95 USER MAINTENANCE 7. USER MAIN- TENANCE 4 Remove the old cleaning pad. Note Be sur e to grasp the green handle when r e- moving the cleaning pad. 5 Grasp the new cleaning pad by the green handle and insert it into place. 6 Press down gently but firmly on both sides of the pad to make sure that it is inserted as far as it can go. Do not forget to ...

  • Ricoh 106 - page 114

    96 USER MAINTENANCE 9 Make sure the plastic pins (marked with “*” in the illustration next to step above) on either side of the toner cas- sette slide along the guides inside the machine. Note Be sur e to hold the toner cassette by its handle. 10 T o close the front unit, press down firmly but gently on both sides of it un- til the top unit clo ...

  • Ricoh 106 - page 115

    97 USER MAINTENANCE 7. USER MAIN- TENANCE Storage P a per P aper should always be stored properly . Improperly stor ed paper might r esult in poor image r eproduction, cr eased copies, or paper misfeeds. G en- erally , avoid paper curling and absorption of moistur e. • A void storing paper in humid areas. In high-temperature and high-humidity , o ...

  • Ricoh 106 - page 116

    98 8. TECHNICAL REFERENCE Pr inting the Help List P rint this list to get a quick guide to fr equently used fax features. Prt Help List O K Press Start 1 While the machine is not performing any other operation, press . 2 Press . 3 Press to print the Help List. Note Print on A4, Letter , or Legal paper . ...

  • Ricoh 106 - page 117

    99 TECHNICAL REFERENCE 8. TECHNICAL REFERENCE 1 Press . 2 Press . 3 Press . 4 Press . 5 Press or until the switch you wish to edit appears. E.g. press twice to show switch 02. Prt Help List Function No.:__ 52 User Param. O K Customising Default Settings with the User Parameters Changing the User Parameters The U ser Parameters allo w you to customi ...

  • Ricoh 106 - page 118

    100 TECHNICAL REFERENCE Registered 5 Select O K 02 :1110 1000 O K 6 T o toggle the value of a single bit, press the number on the numeric keypad that corresponds to the number of the bit you wish to change. E.g. press to change bit 3. 7 Press . The display opposite will flash briefly on the display and then the function menu will reappear . Note Do ...

  • Ricoh 106 - page 119

    101 TECHNICAL REFERENCE 8. TECHNICAL REFERENCE SWITCH 00 ( 2 / 2 ) Explanation Automatically print the Journal after every 35 com- munications Print the Unauthorized Call Report when an unregis- tered caller tries to send you a fax ( when Author - ized Reception is switched on) Do not change this setting Automatically reduce re- ceived images to fi ...

  • Ricoh 106 - page 120

    102 TECHNICAL REFERENCE Explanation PCL Resolution Set the printer to 300 dpi if the designated output is not obtained when printing using a DOS application compatible with the 300 dpi PCL printer . T oner Saving mode When T oner Saving is turned on, the machine prints using less toner . Use this mode if you wish to save on toner and do not mind li ...

  • Ricoh 106 - page 121

    103 TECHNICAL REFERENCE 8. TECHNICAL REFERENCE Function List Function Number Function Name Page Reference 11 Date/T ime 38 12 Dial Mode 34 13 Quick Dial/Print Dial List 53 14 Name Dial 58 15 Language 104 16 Own name/TTI 33 17 Own Fax No. 36 21 Authorized Reception 47 22 Slow (4800bps) 66 31 Adjust V olume 65 32 Remote Change 51 41 Journal 62 42 Dia ...

  • Ricoh 106 - page 122

    104 TECHNICAL REFERENCE Registered Prt Help List O K 15 Language O K Selecting the Language 1 Press . 2 Press . 3 Press and press or until the desired language appears. 4 Press . Note • Do not turn off the machine while “Regis- ter ed” is displayed. • If you do not pr ess , the setting is not changed. 5 Press to return to the standby displa ...

  • Ricoh 106 - page 123

    105 TECHNICAL REFERENCE 8. TECHNICAL REFERENCE Economy Mode Economy mode is a pow er saving feature and is tur ned on by default. If no operation is performed for 5 minutes, the display becomes blank and all the indicators go out. If no operation is performed in the next 10 minutes or 235 minutes (accor ding to the setting), the heater turns off. E ...

  • Ricoh 106 - page 124

    106 Paper Capacity Upper tray plain paper (80 g/m 2 : 20 lb.) 100 sheets Optional paper unit plain paper (80 g/m 2 : 20 lb.) 250 sheets ADF (Auto Document Feeder) Capacity plain paper: A4, L T · LG (80 g/m 2 : 20 lb) 10 sheets Output tray plain paper (80 g/m 2 : 20 lb.) 50 sheets Memory 4 MB (Expandable to 8 MB, 16MB or 32MB) EDO SIMM, 60 ns, 72 p ...

  • Ricoh 106 - page 125

    107 SPECIFIC ATIONS 9. SPECIFICA- TIONS Printer Language PCL 5e compatible Print Resolution 600 dpi × 600 dpi 1200 dpi × 600 dpi (enhanced) Print Speed 6 ppm (pages per minute) Paper/Media T ypes Plain paper Envelopes T ransparencies Label paper Paper Weight 60 to 90 g/m 2 (16 to 24 lb) Interface IEEE 1284 Printing Specifications Resident Font ? ...

  • Ricoh 106 - page 126

    108 SPECIFIC ATIONS Copy Speed 6 cpm (copies per minute) Warm-up T ime 30 seconds or less First copy 17 seconds or less Mulitiple Copies Up to 99 copies Copy Reduction and Enlargement 50%, 71%, 82%, 87%, 93%, 115%, 122%, 141%, 200% Paper/Media T ypes Plain paper Envelopes T ransparencies Label paper Paper Weight 60 to 90 g/m 2 (16 to 24 lb) Origina ...

  • Ricoh 106 - page 127

    109 INDEX INDEX INDEX 1 1 to 1 Copy ........................................................... 69 A Additional printer ................................................ 16 Auto image density .............................................. 76 Automatic Document Feeder (ADF) ..................... x Setting an original ................................. ...

  • Ricoh 106 - page 128

    INDEX 110 Loading Plain paper ..................................................... 11 Small size paper ............................................. 13 Other media ................................................... 15 Location ................................................................. 1 M Metal plate ....................................... ...

  • Ricoh 106 - page 129

    111 INDEX INDEX S Safety information ................................................ i Scanner lock .......................................................... x Unlocking ......................................................... 4 Second (Additional) printer ................................ xi Connecting ........................................... ...

  • Ricoh 106 - page 130

    INDEX 112 EE G025 GS10(GB)_index p109-112 99.8.3, 1:39 PM 112 ...

  • Ricoh 106 - page 131

    Operation Manual Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual Spain RICOH ESP AÑA S.A. A vda. Litoral Mar , 12-14, 08005 Barcelona Phone: +34-(0)93-295-7600 Italy RICOH IT ALIA SpA Via della Metallurgia 12, 37139 V erona Phone: +39-(0)45-818 ...

  • Ricoh 106 - page 132

    CLASS 1 LASER PRODUCT IN ACCORDANCE WITH IEC 825 LASER KLASSE 1 nach IEC 825 © Copyright 1998, RICOH CO ., L TD . Introduction This manual contains detailed instructions on the operation and maintenance of this machine. T o get maximum versatility from this machine, all operators should carefully read and follow the instructions in this manual. Pl ...

  • Ricoh 106 - page 133

    In accordance with ISO Standard 7001, this machine uses the following symbols for the main switch: a means POWER ON. b means POWER OFF . “The Product complies with the requirements of the EMC Directive 89/336/EEC and the Lo w V oltage Directive 73/23/EEC.” Declaration of Conformity ...

  • Ricoh 106 - page 134

    i Safety Information When using your machine, the following safety pr ecautions should always be followed. Types of warnings used in this manual W ARNING Ignoring this warning could cause serious in jury or even death. CAUTION Ignoring this caution could cause injury or damage to pr operty. Symbol examples The d d d d d symbol means a situation tha ...

  • Ricoh 106 - page 135

    ii • Use of controls or adjustment or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. • Only connect the machine to the power source described on the inside of the front cover . • A void multi-wiring. • Do not damage, break or make any modifications to the power cord. Do not pl ...

  • Ricoh 106 - page 136

    iii CAUTION: • Keep the machine away from humidity and dust. A fire or an electric shock might occur . • Do not place the machine on an unstable or tilted surface. If it topples over , it could cause injury . • When you move the machine, unplug the power cord from the wall outlet to avoid fire or electric shock. • When the machine is not be ...

  • Ricoh 106 - page 137

    iv Energy Star pr ogram As an Energy Star partner , we have determined that this machine model meets the Energy Star Guide- lines for energy efficiency . The Energy Star Guidelines intend to establish an international energy- saving system for developing and introducing energy-efficient office equipment to deal with environmen- tal issues, such as ...

  • Ricoh 106 - page 138

    v Contents Safety Information .............................................................................. i Energy Star program .......................................................................... i v General Description ............................................................................ viii Operation Panel ...................... ...

  • Ricoh 106 - page 139

    vi 3. PRINTING Setting Up For Printing ...................................................................... 23 T o install the printer driv er under W indows ® 95 ............................ 23 T o install the printer driv er under W indows ® 3.1x ......................... 24 Ne w Hardware Found W indo w ....................................... ...

  • Ricoh 106 - page 140

    vii 7. TECHNICAL REFERENCE Printing the Help List ......................................................................... 54 Selecting the Language ...................................................................... 55 Selecting 300 dpi or 600 dpi ............................................................... 56 Economy Mode ................. ...

  • Ricoh 106 - page 141

    viii General Description T ype 1 The following descr ibes the T ype 1 machine. This information also applies to the T ype 2 machine, except wher e specifically noted in the next page. Small size paper feed access panel This panel can be lowered to pro vide easier handling when printing on or copying to small size paper . Scanner lock Locks the scan ...

  • Ricoh 106 - page 142

    ix GENERAL DESCRIPTION T ype 2 The following describes the T ype 2 machine. Automatic Document Feeder (ADF) Holds up to 10 sheets of paper for automatic feeding. Place originals face down. Platen cover Lift this cov er to access the exposure glass when you want to scan a page from a book, magazine, or any other original that cannot be fed using the ...

  • Ricoh 106 - page 143

    x 1 Check Display This indicator lights up to alert you to read the message on the display . 2 PC Interface This indicator lights while the machine is recei ving data from a connected computer . 3 Second Printer Pressing this ke y switches between printing on the machine (Second Printer indicator off) and printing on a second printer connected to t ...

  • Ricoh 106 - page 144

    xi GENERAL DESCRIPTION 0 Stop Press this ke y to interrupt the current ongoing procedure and return to the stand by state. This k ey operates as a kind of escape key . Holding down this key for 3 seconds resets the printer mode. A Economy Mode/ Clear Modes key Pressing this ke y cancels the ongoing operation and clears the settings of the current m ...

  • Ricoh 106 - page 145

    ...

  • Ricoh 106 - page 146

    1 1. SETTING UP 1. SETTING UP Package Contents Make sur e that all of the items shown in the P ackage Contents sheet that comes with the machine ar e included. W ARNING Make sure the wall outlet is near the machine and freely accessible so that in event of an emergency it can be unplugged easily . Do not put any metal objects or containers holding ...

  • Ricoh 106 - page 147

    2 SETTING UP Installing the Starter T oner Cassette Handle 2 1 1 Pull the top release lever ( 1 ) and open the top unit ( 2 ). 2 Hold the starter toner cassette by its handle, and remove it from its vinyl bag. CAUTION Keep all plastic bags out of the reach of chil- dren. Important! Be sur e to hold the starter toner cassette by its handle. Note K e ...

  • Ricoh 106 - page 148

    3 SETTING UP 1. SETTING UP 5 Make sure the plastic pins (marked with “ * ” in the illustration next to step 3 ) on either side of the starter toner cas- sette slide along the guides inside the machine. Note Be sur e to hold the starter toner cassette by its handle. 6 T o close the top unit, press down firmly but gently on both sides of it until ...

  • Ricoh 106 - page 149

    4 SETTING UP Installing the Upper Paper T ray 1 Look at the rear of the machine and note the locations of the holes for in- sertion of the upper paper tray on both sides. 2 T o install the upper paper tray , press down on both sides of the tray , making sure that it is inserted as far as it will go. Note P aper will not be fed corr ectly into the m ...

  • Ricoh 106 - page 150

    5 SETTING UP 1. SETTING UP Other Settings for Type 2 T o remove the pr otective sheet 1 Open the ADF cover ( 1 ) and then re- move the protective sheet ( 2 ). 2 Close the ADF cover and make sure it locks securely into place. 1 2 ...

  • Ricoh 106 - page 151

    6 SETTING UP T o install the document output tray 1 Look at the rear of the machine to con- firm where the document output tray should fit. 2 Insert the pin at one side of the tray by gently bending the document tray until it fits in the insert hole. 3 Make sure the small pieces of plastic film curl upwards as shown. Important! The original will no ...

  • Ricoh 106 - page 152

    7 SETTING UP 1. SETTING UP Connecting to a computer Important! Make sur e that the power of both the machine and your computer is turned off befor e making the connection. 1 Plug one end of the your printer cable into the lower port on the side of the machine, and secure it in place as shown in the illustration. Note • The machine must be connect ...

  • Ricoh 106 - page 153

    8 SETTING UP 1 Attach the power cord to the machine and plug the other end into a outlet. 2 T urn on the machine. W ARNING • Only connect the machine to the power source described on the inside of the front cover . • Avoid multi-wiring. • Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it, pull ...

  • Ricoh 106 - page 154

    9 2. GETTING A CQU AINTED 2. GETTING A CQU AINTED Paper and Other Media The machine supports printing on the following types of paper/media fr om the upper paper tray . Refer to the follo wing pages for details on loading each type of paper/media into the upper paper tray . P aper/Media type (P aper size) Displa y P age A4 (210mm × 297mm) A4 p .10 ...

  • Ricoh 106 - page 155

    10 GETTING ACQUAINTED Loading Paper After you set up the machine and specify the paper size, y ou are r eady to actually load paper . Important! When loading paper into the upper paper tray , make sure that you load maximum 100 sheets of plain paper (80 g/m 2 or 20 lb). Overloading the upper paper tray can cause misfeeds. T o load plain paper into ...

  • Ricoh 106 - page 156

    11 GETTING ACQUAINTED 2. GETTING A CQU AINTED 5 Press . “Prt Help List” appears. 6 Press or until “1 T ray Pap. Size” appears. 1 T ray Pap. Size 3 User Param. 2 Language 1 Tray Pap. Size Prt Help List Note If the paper feed unit (option) is installed, r efer to page 19 for details on how to specify the paper size. 7 Press .“T ray guide OK ...

  • Ricoh 106 - page 157

    12 GETTING ACQUAINTED T o load small size paper Note W e r ecommend that you always feed small size paper vertically , with one of its shorter edges feeding into the mac hine. 1 Remove all paper before loading small size paper in the upper paper tray . 2 Open the small panel on the back of the machine by unlatching it as shown in the illustration. ...

  • Ricoh 106 - page 158

    13 GETTING ACQUAINTED 2. GETTING A CQU AINTED 5 Press . “Prt Help List” appears. 6 Press or until “1 T ray Pap.Size” appears. 1 T ray Pap. Size 3 User Param. 2 Language 1 Tray Pap. Size Prt Help List Note If the paper feed unit (option) is installed, r efer to page 19 for details on how to specify the paper size. 7 Press . “T ray guide OK ...

  • Ricoh 106 - page 159

    14 GETTING ACQUAINTED Loading Other Media U se the following pr ocedures to load envelopes, transpar encies, and label paper . T o load envelopes Load up to 5 envelopes at a time, using the same procedur e for loading small size paper on page 12. • Insert en velopes print side up with the stamp position as shown. • En velope flaps should be sec ...

  • Ricoh 106 - page 160

    15 GETTING ACQUAINTED 2. GETTING A CQU AINTED Connecting a Second Printer (Additional Printer) The machine featur es a port that you can use to connect your curr ent printer as a second printer (additional printer). Once you do, y ou have a selection of this machine or the second printer at the touch of key . Note Make sur e that the power of your ...

  • Ricoh 106 - page 161

    16 GETTING ACQUAINTED Installing the Paper Feed Unit (Option) This section describes how to install the paper feed unit (option) and ho w to load paper in it. Addition of a paper feed unit pr ovides you with a second paper source that holds up to 250 sheets of A4 or Letter siz e paper . Important! Make sur e that machine power is turned off and tha ...

  • Ricoh 106 - page 162

    17 GETTING ACQUAINTED 2. GETTING A CQU AINTED 3 The machine has handhold at the loca- tions shown in the illustration. Note that the illustration shows the machine as viewed from above. 4 Carefully lower the machine onto the paper feed unit, making sure that the dowels on the paper feed unit fit into holes in the bottom of the machine properly . CA ...

  • Ricoh 106 - page 163

    18 GETTING ACQUAINTED T o load paper into the paper feed unit Y ou can load either A4 or Letter size paper into the paper feed unit. Refer to page 19 for details on ho w to change the positions of the paper guides inside of the tray to match the type of paper you ar e using. 3 Up to 250 sheets of plain paper (80 g/m 2 or 20 lb) can be inserted into ...

  • Ricoh 106 - page 164

    19 GETTING ACQUAINTED 2. GETTING A CQU AINTED T o change the paper size U se the following procedur e to set the positions of the paper guides inside the paper tray for either A4 or Letter paper . 1 Squeezing in on both sides of the front guide, slide it to the correct position for the desired paper size. 2 Squeezing in on both sides of the side gu ...

  • Ricoh 106 - page 165

    20 GETTING ACQUAINTED Lower Tray? O K Registered 4 After pressing , press or until the desired size ap- pears. Letter (8 1 / 2 × 11) ? ↔ A4 ? 5 When the correct size is on the display , press . “Registered” appears. 1 Press until the desired pa- per source appears. The upper paper tray is selected when "U" is on the display , and t ...

  • Ricoh 106 - page 166

    21 GETTING ACQUAINTED 2. GETTING A CQU AINTED Upgrading Memory Y ou can install Single Inline M emor y M odule (SIMM) to upgrade the on- boar d memor y of the machine. The machine is shipped from the factory with a 4MB SIMM, which can be r eplaced with an 8MB, 16MB or 32MB SIMM. U se the following pr ocedure to install 8MB, 16MB or 32MB SIMM. Note ...

  • Ricoh 106 - page 167

    22 GETTING ACQUAINTED SIMM 4 Carefully lift out the SIMM board cur - rently installed on your printer . 5 Angle the new SIMM board as shown in the illustration, and insert it down into the slot. Gently rock it back and forth until you hear it snap into place. Important! Make sur e the SIMM board is oriented cor - r ectly when you insert it into the ...

  • Ricoh 106 - page 168

    23 3. PRINTING 3. PRINTING Setting Up For Printing In or der to use the machine as a printer , you must install its printer driv er on your computer . The printer driver can be found on the diskette that comes with the machine. U se the follo wing procedure to install the printer driver . Note • The following pr ocedur e assumes that you ar e alr ...

  • Ricoh 106 - page 169

    24 PRINTING T o install the printer driver under Windows ® 3.1x 1 Quit all applications except Program Manager . • Press [Alt] + [T ab] to display the T ask List window . • Select the application you want to quit. • Click [End T ask] and then press [Enter] to quit the program. • Repeat the above steps as many times as necessary to quit all ...

  • Ricoh 106 - page 170

    25 PRINTING 3. PRINTING Features Y ou Can Access Fr om the Printer Driver Printer Driver Contents ■ Paper Defaults Paper size : Size, Measurement Unit Page orientation : Portrait, Landscape Output : Copies, Print in reverse order Paper source : Source About ■ N-Up Printing Select a Layout Option : Normal, Reduce for N-up printing (Print page bo ...

  • Ricoh 106 - page 171

    26 PRINTING Using the Second Printer (Additional Printer) U se the following procedur e to switch between this machine and a second printer when a second printer is connected. Important! If the second printer has a Bi-Dir ection mode, make sur e to set the Bi-Dir ection mode to Off. Note Refer to page 15 for details on connecting a second printer . ...

  • Ricoh 106 - page 172

    27 4. COPYING 4. COPYING Making a Copy 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). Alignment of Originals Align the original with the scale of the exposure glass. • W hen the original is a standar d size such as A4 or Letter , align it to the indexes on the scale. ...

  • Ricoh 106 - page 173

    28 COPYING Making Multiple Copies You can specify the number of copies to be printed by pr essing (to increase the number) or (to reduce the number). 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). 2 Press or until the de- sired number of copies appears. Note Y ou can s ...

  • Ricoh 106 - page 174

    29 COPYING 4. COPYING Making a Book Copy When copying from a book, the thickness of the book should be no mor e than 30mm (1.18"). 1 Lift the platen cover . 2 Open to the page you want to copy and lay the page face down on the exposure glass. Be sure to align one of the cor - ners of the page with the arrow mark on the scale. 3 Lower the plate ...

  • Ricoh 106 - page 175

    30 COPYING Reduction and Enlargement P r ess or to select preset r eduction or enlargement factors for the copy operation. T o set the reduction factor 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). 2 Press until the desired size ra- tio appears. The sizes change in th ...

  • Ricoh 106 - page 176

    31 COPYING 4. COPYING 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). 2 Press until the desired size ra- tio appears. The sizes change in the fol- lowing order . 100% → 115% → 122% 200% ← “141% A5 A4” 3 Press to perform the copy op- eration. Note Pr ess to cle ...

  • Ricoh 106 - page 177

    32 COPYING Zoom (In 1% Increments) Zoom allo ws you to tune the pr eset reduction and enlargement factors to ex- actly the value you want. Y ou can change the zoom factor in incr ements of 1%. T o use zoom 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). 2 Press (decreas ...

  • Ricoh 106 - page 178

    33 COPYING 4. COPYING Adjusting Copy Image T o select the resolution/photo setting 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). 2 Press the Copy Mode key to specify the resolution or halftoning method for the copy operation. 3 A pointer ( T ) moves on the display to ...

  • Ricoh 106 - page 179

    34 COPYING T o adjust the image density 1 3 2 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). 3 Press to perform the copy op- eration. Note Pr ess to clear the setting after copying. 2 Press the Density key to select the im- age density settings. • Select [Lighter] to ...

  • Ricoh 106 - page 180

    35 COPYING 4. COPYING Setting an Original on the ADF (Type 2 only) Y ou can load up to 10 sheets of plain paper (80 g/m 2 or 20 lb) at a time into the Automatic D ocument Feeder (ADF). Important! Check to mak e sur e that the ADF cover is secur ely closed befor e using it. 1 Fan the stack of originals. Never try to place more than 10 sheets of plai ...

  • Ricoh 106 - page 181

    36 COPYING 5 Stretch the extend tray that supports the originals. Originals that do not meet the follo wing requir ements can cause paper misfeeds, and even damage the machine. ■ Requirements • Thickness 0.05mm to 0.2mm (0.002" to 0.08") • Weight 60 to 90 g/m 2 (16lb to 24lb) • Clear markings Markings on the originals must be clea ...

  • Ricoh 106 - page 182

    37 COPYING 4. COPYING Sorting Output (Type 2 only) The following example sho ws how output is affected b y turning sorting on and off. Important! The sort operation r equir es scanning of all your originals into memory befor e starting the copy operation. The number of originals that can be scanned at one time depends on how much memory you have in ...

  • Ricoh 106 - page 183

    38 COPYING 3 When you press to start the copy operation, all of the originals on the ADF are scanned into memory before they are printed. Note Pr ess to clear the setting after copying. ...

  • Ricoh 106 - page 184

    39 5. TROUBLE- SHOO TING 5. TROUBLESHOOTING General Status Nothing happens when the machine is turned on. Paper misfeeds when the machine is turned on for the first time after the installation. After installing a SIMM board, the memory value that appears on the machine's display does not match the amount of memory in- stalled. Cause Power cord ...

  • Ricoh 106 - page 185

    40 TROUBLESHOOTING Printing Status Frequent paper mis- feeds. Part of the image is unclear . Black lines on the printout. Dark areas along the sides of the printout. Printing and Copying ( 2 / 2 ) Page p.10,18 p.14 p.14 p.50 p.50 p.50 Status Abnormal or unex- pected printing results. Parts of the image are not printed out. Cannot print from a secon ...

  • Ricoh 106 - page 186

    41 TROUBLESHOOTING 5. TROUBLE- SHOO TING Copying Page p.3 p.35 p.35 p.35 p.36 p.35 p.6 p.50 p.27 p.34 p.49 p.49 p.34 p.33 p.19 Status "Error 90" appears on the display , and the copy operation is aborted when copying from the exposure glass. Frequent original mis- feeds with ADF . Original is not fed from the ADF . Original is not fed out ...

  • Ricoh 106 - page 187

    42 TROUBLESHOOTING Message Close cover Add paper T oner near end Add T oner Clear paper Memory overflow Remove original (when original is set in ADF) “Remove original” and “from glass” “Memory full” and “Press Stop” “Memory full” and “Press Start” Error 90 Error XX Cause T op unit is open. Machine is out of paper . Machine i ...

  • Ricoh 106 - page 188

    43 TROUBLESHOOTING 5. TROUBLE- SHOO TING 2 1 Clearing a Paper Misfeed This section describes how to clear a paper misfeed when one occurs. CAUTION When removing misfed paper , do not touch the fusing section because it could be very not. Important! Hold a misfed sheet with both hands and slowly pull it out. Do not use a tool such as a scr ewdriver ...

  • Ricoh 106 - page 189

    44 TROUBLESHOOTING 3 Pressing down on the paper release le- ver (blue) on the right side, pull out the misfed paper . 4 Pull out the misfed paper in the direc- tions indicated by the arrows in the il- lustrations. Note • If you ar e using the paper feed unit (op- tion) and cannot clear the misfeed using this pr ocedure , use the pr ocedure on pag ...

  • Ricoh 106 - page 190

    45 TROUBLESHOOTING 5. TROUBLE- SHOO TING T ype 2 Area 1 or 2 1 Pull the top release lever ( 1 ) and open the top unit ( 2 ). 2 Pull out the toner cassette. Note • Be sure to hold the toner cassette by its handle . • K eep the toner cassette horizontal to avoid spilling the toner . Area 1 Area 2 Area 3 Area 4 1 2 ...

  • Ricoh 106 - page 191

    46 TROUBLESHOOTING 3 Pressing down on the paper release le- ver (blue) on the right side, pull out the misfed paper . 4 Pull out the misfed paper in the direc- tions indicated by the arrows in the il- lustrations. Note • If you ar e using the paper feed unit (op- tion) and cannot clear the misfeed using this pr ocedure , use the pr ocedur e on pa ...

  • Ricoh 106 - page 192

    47 TROUBLESHOOTING 5. TROUBLE- SHOO TING Area 3 or 4 1 Open the ADF cover . Note Be sur e to open the ADF cover befor e pulling out the misfed original. F ailure to do so can r esult in damage to the original. 2 Pull out the misfed original. 3 Close the ADF cover , and make sure it locks securely into place. Important! Make sur e to specify the des ...

  • Ricoh 106 - page 193

    48 TROUBLESHOOTING 2 Pull out the misfed paper . 3 Slide the paper tray back into the paper feed unit until it locks into place. Ti p If you cannot find a remedy for unexpected printout results here, check the printer driver's online help for other useful information. ...

  • Ricoh 106 - page 194

    49 6. USER MAIN- TENANCE 6. USER MAINTENANCE Daily Maintenance Clean with a damp cloth and wipe dry . Note T urn off the mac hine befor e cleaning Exposure glass Platen cov er (T ype 2) Exposure glass ADF Platen cov er Platen (T ype 1) ...

  • Ricoh 106 - page 195

    50 USER MAINTENANCE Replacing the T oner Cassette And the Cleaning Pad P rinting on A4 size paper under the r ecommended temperature and hu- midity conditions noted in the table under “Conditions ” on page 1, you can expect a toner cassette to print appro ximately 3,000 pages when you are printing typical business letters that have text co veri ...

  • Ricoh 106 - page 196

    51 USER MAINTENANCE 6. USER MAIN- TENANCE 4 Remove the old cleaning pad. Note Be sur e to grasp the gr een handle when re- moving the cleaning pad. 5 Insert the new cleaning pad into place by grasping the green handle. 6 Press down gently but firmly on both sides of the pad to make sure that it is inserted as far as it can go. Do not forget to inst ...

  • Ricoh 106 - page 197

    52 USER MAINTENANCE 9 Make sure the plastic pins (marked with “ * ” in the illustration next to step above) on either side of the toner cas- sette slide along the guides inside the machine. Note Be sur e to hold the toner cassette by its handle. 10 T o close the top unit, press down firmly but gently on both sides of it until the top unit close ...

  • Ricoh 106 - page 198

    53 USER MAINTENANCE 6. USER MAIN- TENANCE Storage Paper P aper should always be stored properly . Improperly stor ed paper might r esult in poor image r eproduction, cr eased copies, or paper misfeeds. G en- erally , avoid paper curling and absorption of moistur e. • A void storing paper in humid areas. In high-temperature and high-humidity , or ...

  • Ricoh 106 - page 199

    54 7. TECHNICAL REFERENCE Printing the Help List Y ou can print out the help list. Prt Help List O K Press Start 1 While the machine is not performing any other operation, press . The message “Prt Help List” appears. 2 Press . “Press Start” appears. 3 Press to print the Help List. Note Print on A4, Letter , or Le gal paper . ...

  • Ricoh 106 - page 200

    55 TECHNICAL REFERENCE 7. TECHNICAL REFERENCE Please wait Registered Prt Help List O K 2 Language Selecting the Language The language for the display can be selected from the follo wing: English, F rench, S panish, Italian, German, S wedish 1 Press . “Prt Help List” appears. 2 Press or until "2 Language" appears. The messages change i ...

  • Ricoh 106 - page 201

    56 TECHNICAL REFERENCE 02:0010 000 Selecting 300 dpi or 600 dpi Set the printer to 300 dpi if the designated output is not obtained when printing using a DOS application compatible with the 300 dpi PCL printer . Prt Help List O K 3 User param. 1 Press . “Prt Help List” ap- pears. 2 Press or until “3 User Param.” appears. The messages change ...

  • Ricoh 106 - page 202

    57 TECHNICAL REFERENCE 7. TECHNICAL REFERENCE Please wait Registered 5 Press . “Please wait”, then “Reg- istered” appears. Note • T o cancel this chang e, pr ess or instead of . “Please wait” and “Not Re gistered” appear on the display . • Do not turn off the mac hine while “Please wait”, “Re gistered” or “Not Re giste ...

  • Ricoh 106 - page 203

    58 TECHNICAL REFERENCE Economy Mode The Economy mode can be selected to save po wer . If no operation is per- formed for 5 minutes, the display becomes blank and all the indicators go out. If no operation is performed in the next 10 minutes or 235 minutes (accor ding to the setting), the heater turns off. The economy mode is on as the default setti ...

  • Ricoh 106 - page 204

    59 TECHNICAL REFERENCE 7. TECHNICAL REFERENCE Selecting T oner Saving Mode The toner saving mode status has two settings. 3 User param. 02:00 00 0 00 Prt Help List O K 1 Press . “Prt Help List” appears. 2 Press or until “3 User Param.” appears. The messages change in the following order . 1 T ray Pap. Size 3 User Param. 2 Language 3 Press a ...

  • Ricoh 106 - page 205

    60 T ype 1 Paper Capacity Upper tray plain paper (80 g/m 2 : 20 lb.) 100 sheets Option paper unit plain paper (80 g/m 2 : 20 lb.) 250 sheets Output tray Capacity plain paper (80 g/m 2 : 20 lb.) 50 sheets Memory 4 MB (Expandable to 8 MB, 16 MB or 32 MB) EDO SIMM, 60 ns, 72 pin Dimensions 249mm × 352mm × 576mm (H × W × D) 9.81" × 13.87" ...

  • Ricoh 106 - page 206

    61 SPECIFICA TIONS 8. SPECIFICA- TIONS Printer Language PCL 5e emulation Print Resolution 600 dpi × 600 dpi 1200 dpi × 600 dpi (enhanced) Print Speed 6 ppm (page per minute) Paper/Media T ypes Plain paper Envelopes T ransparencies Label paper Paper Weight 60 to 90 g/m 2 (16 to 24 lb) Interface IEEE 1284 compartible Printing Specifications Residen ...

  • Ricoh 106 - page 207

    62 SPECIFICA TIONS Copy Speed 6 cpm (copy per minute) Warm-up T ime 30 seconds or less First copy 17 seconds or less Mulitiple Copies Up to 99 copies Copy Reduction and Enlargement 50%, 71%, 82%, 87%, 93%, 115%, 122%, 141%, 200% Paper/Media T ypes Plain paper Envelopes T ransparencies Label paper Paper Weight 60 to 90 g/m 2 (16 to 24 lb) Original T ...

  • Ricoh 106 - page 208

    63 INDEX INDEX INDEX 1 1 to 1 Copy ........................................................... 27 A Additional Printer ................................................ 15 Auto image density .............................................. 34 Automatic Document Feeder (ADF) ................... ix Setting an original ................................... ...

  • Ricoh 106 - page 209

    INDEX 64 P Paper and Other Media ......................................... 9 Paper Select ........................................................... x paper size Changing ........................................................ 19 Specifying (upper) ................................... 11, 13 Specifying (lower) ..................................... ...

  • Ricoh 106 - page 210

    Operation Manual Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual Spain RICOH ESP AÑA S.A. A vda. Litoral Mar , 12-14, 08005 Barcelona Phone: +34-(0)93-295-7600 Italy RICOH IT ALIA SpA Via della Metallurgia 12, 37139 V erona Phone: +39-(0)45-818 ...

  • Ricoh 106 - page 211

    Operation Manual Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual. RICOH CORPORATION CALLING FOR SERVICE For service in the United States, call: 1-800-RICOH38 (1-800-742-6438) Spain RICOH ESP AÑA S.A. Avda. Litoral Mar , 12-14, 08005 Barcelona P ...

  • Ricoh 106 - page 212

    © Copyright 1999, RICOH CO., L TD. Introduction This manual contains detailed instructions on the operation and maintenance of this machine. T o get maximum versatility from this machine, all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. Please read the safety ...

  • Ricoh 106 - page 213

    i Safety Inf or mation When using your machine, the following safety pr ecautions should always be followed. Types of w ar nings used in this manual W ARNING Ignoring this warning could cause ser ious inj ury o r e v e n death. CAUTION Ignoring this caution could cause injur y or damage to property . Symbol examples The d d d d d symbol means a sit ...

  • Ricoh 106 - page 214

    ii • Use of controls or adjustment or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. • Only connect the machine to the power source described on the inside of the front cover . • A void multi-wiring. • Do not damage, break or make any modifications to the power cord. Do not pl ...

  • Ricoh 106 - page 215

    iii CAUTION: • Keep the machine away from humidity and dust. A fire or an electric shock might occur . • Do not place the machine on an unstable or tilted surface. If it topples over , it could cause injury . • When you move the machine, unplug the power cord from the wall outlet to avoid fire or electric shock. • When the machine is not be ...

  • Ricoh 106 - page 216

    iv Energy Star program As an Energy Star partner , we have determined that this machine model meets the Energy Star Guide- lines for energy efficiency . The Energy Star Guidelines intend to establish an international energy- saving system for developing and introducing energy-efficient office equipment to deal with environmen- tal issues, such as g ...

  • Ricoh 106 - page 217

    v Contents Safety Information .............................................................................. i Energy Star program .......................................................................... iv Part Names ......................................................................................... viii Operation Panel ................... ...

  • Ricoh 106 - page 218

    vi T o select the paper source .............................................................. 20 Upgrading Memory ............................................................................ 21 3. PRINTING AND SCANNING Setting up ............................................................................................ 23 Installing the Software ...

  • Ricoh 106 - page 219

    vii 7. TECHNICAL REFERENCE Printing the Help List ......................................................................... 56 Selecting the Language ...................................................................... 57 Selecting 300 dpi or 600 dpi ............................................................... 58 Economy Mode ................. ...

  • Ricoh 106 - page 220

    viii Part Names T ype 1 The following descr ibes the T ype 1 machine. This information also applies to the T ype 2 machine, except wher e specifically noted in the next page. Small size paper feed access panel This panel can be lowered to provide easier handling when printing on or copying to small size paper . Scanner lock Locks the scanner to pre ...

  • Ricoh 106 - page 221

    ix GENERAL DESCRIPTION T ype 2 The following describes the T ype 2 machine. Automatic document feeder (ADF) Holds up to 10 sheets of paper for automatic feeding. Place originals face down. Platen cover Lift this cover to access the exposure glass when you want to scan a page from a book, magazine, or any other original that cannot be fed using the ...

  • Ricoh 106 - page 222

    x 1 Check Display This indicator lights up to alert you to read the message on the display . 2 PC Interface This indicator lights while the machine is receiving data from a connected computer . 3 Second Printer Pressing this key switches between printing on the machine (Second Printer indicator off) and printing on a second printer connected to the ...

  • Ricoh 106 - page 223

    xi GENERAL DESCRIPTION 0 Stop Press this key to interrupt the current ongoing procedure and return to the stand by state. This key operates as a kind of escape key . Holding down this key for 3 seconds resets the printer mode. A Economy Mode/ Clear Modes key Pressing this key cancels the ongoing operation and clears the settings of the current mode ...

  • Ricoh 106 - page 224

    xii ...

  • Ricoh 106 - page 225

    1 1. SETTING UP 1. SETTING UP Package Contents Make sur e that all of the items shown in the P ackage Contents sheet that comes with the machine are included. W ARNING Make sure the wall outlet is near the machine and freely accessible so that in event of an emergency it can be unplugged easily . Do not put any metal objects or containers holding w ...

  • Ricoh 106 - page 226

    2 SETTING UP Installing the Star ter T oner Cassette Handle 2 1 1 Pull the top release lever ( 1 ) and open the top unit ( 2 ). 2 Hold the starter toner cassette by its handle, and remove it from its vinyl bag. CAUTION Keep all plastic bags out of the reach of chil- dren. Important! Be sur e to hold the starter toner cassette by its handle. Note Ke ...

  • Ricoh 106 - page 227

    3 SETTING UP 1. SETTING UP 5 Make sure the plastic pins (marked with “ * ” in the illustration next to step 3 ) on either side of the starter toner cas- sette slide along the guides inside the machine. Note Be sur e to hold the starter toner cassette by its handle. 6 T o close the top unit, press down firmly but gently on both sides of it until ...

  • Ricoh 106 - page 228

    4 SETTING UP Installing the Upper P a per T ray 1 Look at the rear of the machine and note the locations of the slots for in- sertion of the upper paper tray on both sides. 2 T o install the upper paper tray , press down on both sides of the tray , making sure that it is inserted as far as it will go. Note Paper will not be fed corr ectly into the ...

  • Ricoh 106 - page 229

    5 SETTING UP 1. SETTING UP Other Settings f or Type 2 T o remove the protective sheet 1 Open the ADF cover ( 1 ) and then re- move the protective sheet ( 2 ). 2 Close the ADF cover and make sure it locks securely into place. 1 2 T o install the document output tray 1 Look at the rear of the machine to con- firm where the document output tray should ...

  • Ricoh 106 - page 230

    6 SETTING UP 3 Make sure the small pieces of plastic film curl upwards as shown. Important! The original will not be deliver ed properly , if the films ar e not set as shown. T o pull out the output tray extension 1 T o pull out the output tray extension as shown. ...

  • Ricoh 106 - page 231

    7 SETTING UP 1. SETTING UP Connecting to a computer Important! Make sur e that the power of both the machine and your computer is turned off befor e making the connection. 1 Plug one end of the your parallel cable into the lower port on the side of the machine, and secure it in place as shown in the illustration. Note • The machine must be connec ...

  • Ricoh 106 - page 232

    8 SETTING UP 1 Attach the power cable to the machine and plug the other end into a outlet. 2 T urn on the machine. W ARNING • Only connect the machine to the power source described on the inside of the front cover . • Avoid multi-wiring. • Do not damage, break or make any modifications to the power cable. Do not place heavy objects on it, pul ...

  • Ricoh 106 - page 233

    9 2. GETTING ACQUAINTED 2. GETTING ACQUAINTED Important! ☛ The default display language is English. For how to change to your pr eferr ed language, see page 57. Paper and Other Media The machine supports printing on the following types of paper/media from the upper paper tray . Refer to the follo wing pages for details. Paper/Media type (Paper si ...

  • Ricoh 106 - page 234

    10 GETTING ACQUAINTED Loading Paper After you have set up the machine y ou nee to load paper then specify the paper size using the procedur e below . Important! When loading paper into the upper paper tray , do not load mor e than 100 sheets of plain paper (80 g/m 2 or 20 lb). Overloading the upper paper tray can cause misfeeds. T o load plain pape ...

  • Ricoh 106 - page 235

    11 GETTING ACQUAINTED 2. GETTING ACQUAINTED 5 Press . 6 Press . 1 Tray Pap. Size Prt Help List Note If the paper feed unit (option) is installed, r efer to page 19 for details on how to specify the paper size. 7 Press . 8 After pressing , press or until the desired size ap- pears. 9 When the correct paper size is on the display , press . If the pap ...

  • Ricoh 106 - page 236

    12 GETTING ACQUAINTED T o load small size paper Note W e r ecommend that you always feed small size paper vertically , with one of its shorter edges feeding into the machine. 1 Remove all paper before loading small size paper in the upper paper tray . 2 Open the small panel on the back of the machine by unlatching it as shown in the illustration. O ...

  • Ricoh 106 - page 237

    13 GETTING ACQUAINTED 2. GETTING ACQUAINTED 5 Press . 6 Press . 1 Tray Pap. Size Prt Help List Note If the paper feed unit (option) is installed, r efer to page 19 for details on how to specify the paper size. 7 Press . 8 After pressing , press or until the desired size appears. 9 When the correct paper size is on the display , press . Registered 5 ...

  • Ricoh 106 - page 238

    14 GETTING ACQUAINTED Loading Other Media U se the following procedur es to load envelopes, transparencies, and label paper . T o load en velopes Load up to 5 envelopes at a time, using the same procedur e for loading small size paper on page 12. • Insert envelopes print side up with the stamp position as shown. • Envelope flaps should be secur ...

  • Ricoh 106 - page 239

    15 GETTING ACQUAINTED 2. GETTING ACQUAINTED Connecting a Second Printer (Additional Printer) The machine features a port that y ou can use to connect your curr ent printer as a second printer (additional printer). O nce you do, you have a selection of this machine or the second printer at the touch of key . Note Make sur e that the power of your co ...

  • Ricoh 106 - page 240

    16 GETTING ACQUAINTED Installing the Paper Feed Unit (Option) This section describes how to install the paper feed unit (option) and ho w to load paper in it. Addition of a paper feed unit pr ovides you with a second paper source that holds up to 250 sheets of A4 or Letter size paper . Important! Make sur e that machine power is turned off and that ...

  • Ricoh 106 - page 241

    17 GETTING ACQUAINTED 2. GETTING ACQUAINTED 3 The machine has handhold at the loca- tions shown in the illustration. Note that the illustration shows the machine as viewed from above. 4 Carefully lower the machine onto the paper feed unit, making sure that the dowels on the paper feed unit fit into holes in the bottom of the machine properly . CAUT ...

  • Ricoh 106 - page 242

    18 GETTING ACQUAINTED T o load paper into the pa per feed unit Y ou can load either A4 or Letter size paper into the paper feed unit. Refer to page 19 for details on ho w to change the positions of the paper guides inside of the tray to match the type of paper you ar e using. 3 Up to 250 sheets of plain paper (80 g/m 2 or 20 lb) can be inserted int ...

  • Ricoh 106 - page 243

    19 GETTING ACQUAINTED 2. GETTING ACQUAINTED T o change the paper size U se the following pr ocedure to set the positions of the paper guides inside the paper tray for either A4 or Letter paper . 1 Squeezing in on both sides of the front guide, slide it to the correct position for the desired paper size. 2 Squeezing in on both sides of the side guid ...

  • Ricoh 106 - page 244

    20 GETTING ACQUAINTED Lower Tray? O K Registered 4 After pressing , press or until the desired size ap- pears. 5 When the correct size is on the display , press . 1 Press until the desired pa- per source appears. The upper paper tray is selected when "U" is on the display , and the paper feed unit is selected when "L" is on the ...

  • Ricoh 106 - page 245

    21 GETTING ACQUAINTED 2. GETTING ACQUAINTED Upgrading Memory Y ou can install Single Inline M emor y Module (SIMM) to upgrade the on- boar d memor y of the machine. The machine is shipped from the factory with a 4MB SIMM, which can be r eplaced with an 8MB, 16MB or 32MB SIMM. U se the following pr ocedure to install 8MB, 16MB or 32MB SIMM. Note The ...

  • Ricoh 106 - page 246

    22 GETTING ACQUAINTED SIMM 4 Carefully lift out the SIMM board cur - rently installed on your printer . 5 Angle the new SIMM board as shown in the illustration, and insert it down into the slot. Gently rock it back and forth until you hear it snap into place. Important! Make sur e the SIMM boar d is oriented cor- r ectly when you insert it into the ...

  • Ricoh 106 - page 247

    23 3. PRINTING AND SCANNING 3. PRINTING AND SCANNING When connected to a compatible PC, you can use this machine as a high performance laser printer and black and white scanner . Important! • Make sure that your PC parallel port is set to ECP . If it is not, please consult your PC manual on how to change it. Note • For information on PC hardwar ...

  • Ricoh 106 - page 248

    24 PRINTINGAND SCANNING 4 Do one of the following according to your operating system: • Windows ® 95/98 Run the setup application. For example, if your CD-ROM is assigned to D, run “D:Scan- inSetup.exe”. • Windows ® 3.1 First copy the disk images under the directory named “3.1” on the CD-ROM to floppy disks. Then insert the first fl ...

  • Ricoh 106 - page 249

    25 PRINTINGAND SCANNING 3. PRINTING AND SCANNING Features Y ou Can Access Fr om the Pr inter Driver Printer Driver Contents ■ Paper Defaults Paper size : Size, Measurement Unit Page orientation : Portrait, Landscape Output : Copies, Print in reverse order Paper source : Source About ■ N-Up Printing Select a Layout Option : Normal, Reduce for N- ...

  • Ricoh 106 - page 250

    26 PRINTINGAND SCANNING Using the Second Printer (Additional Printer) U se the following procedur e to switch between this machine and a second printer when a second printer is connected. Important! If the second printer has a bi-dir ectional mode, make sure you turn it off. Note ☛ Connecting a second printer , see page 15. T o pr int to the seco ...

  • Ricoh 106 - page 251

    27 4. COPYING 4. COPYING Making a Copy 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). Alignment of Originals Align the original with the scale of the exposure glass. • When the original is a standar d size such as A4 or Letter , align it to the indexes on the scale. ...

  • Ricoh 106 - page 252

    28 COPYING Making Multiple Copies You can specify the number of copies to be printed by pr essing (to increase the number) or (to reduce the number). 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). 2 Press or until the de- sired number of copies appears. Note Y ou can s ...

  • Ricoh 106 - page 253

    29 COPYING 4. COPYING Making a Book Copy When copying from a book, the thickness of the book should be no mor e than 30mm (1.18"). 1 Lift the platen cover . 2 Open to the page you want to copy and lay the page face down on the exposure glass. Be sure to align one of the cor - ners of the page with the arrow mark on the scale. 3 Lower the plate ...

  • Ricoh 106 - page 254

    COPYING Reduction and Enlargement Press Reduce 0 Or En8 to select preset reduction or enlargement factors for the copy operation. 0 Lift the platen cover (0). Place the original face down at the arrow mark on the scale (a). Close the platen cover (@I). Reduce Press 0 until the desired size ra- tio appears. The sizes change in the fol- lowing order. ...

  • Ricoh 106 - page 255

    Q Q Lift the platen cover (0). Place the original face down at the arrow mark on the scale (0). Close the platen cover (0). Press Enlarge 0 until the desired size ra- tio appears. The sizes change in the fol- lowing order. Press + 121% 4 129% + 155% LTR. LGL c 200% J @Start ..O to perform the copy op- eration. & Note Press Clear Modes 0 to clea ...

  • Ricoh 106 - page 256

    32 COPYING Zoom (In 1% Increments) Zoom allows y ou to tune the pr eset reduction and enlargement factors to ex- actly the value you want. Y ou can change the zoom factor in increments of 1%. T o use zoom 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). 2 Press (decrease ...

  • Ricoh 106 - page 257

    33 COPYING 4. COPYING Adjusting the Copy Image T o select the resolution/photo setting 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). 2 Press the Copy Mode key to specify the resolution or halftoning method for the copy operation. 3 A pointer ( T ) moves on the display ...

  • Ricoh 106 - page 258

    34 COPYING T o adjust the image density 1 3 2 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). 3 Press to perform the copy op- eration. Note Pr ess to clear the setting after copying. 2 Press the Density key to select the im- age density . • Select [Lighter] to make th ...

  • Ricoh 106 - page 259

    35 COPYING 4. COPYING Setting an Or ig inal on the ADF (Type 2 only) Y ou can load up to 10 sheets of plain paper (80 g/m 2 or 20 lb) at a time into the Automatic D ocument F eeder (ADF). Important! Check to make sur e that the ADF cover is secur ely closed befor e using it. 1 Fan the stack of originals. Never try to place more than 10 sheets of pl ...

  • Ricoh 106 - page 260

    36 COPYING 5 Stretch the extend tray that supports the originals. Originals that do not meet the follo wing requir ements can cause paper misfeeds, and even damage the machine. ■ Requirements • Thickness 0.05mm to 0.2mm (0.002" to 0.08") • Weight 60 to 90 g/m 2 (16lb to 24lb) • Clear markings Markings on the originals must be clea ...

  • Ricoh 106 - page 261

    37 COPYING 4. COPYING Sor ting Output (T ype 2 only) The following example shows ho w output is affected b y turning sorting on and off. Important! The sort operation r equires scanning of all your originals into memory befor e starting the copy operation. The number of originals that can be scanned at one time depends on how much memory you have i ...

  • Ricoh 106 - page 262

    38 COPYING 3 When you press to start the copy operation, all of the originals on the ADF are scanned into memory before they are printed. Note Pr ess to clear the setting after copying. ...

  • Ricoh 106 - page 263

    39 5. TROUBLE- SHOOTING 5. TROUBLESHOOTING General Status Nothing happens when the machine is turned on. Paper misfeeds when the machine is turned on for the first time after the installation. After installing a SIMM board, the memory value that appears on the machine's display does not match the amount of memory in- stalled. Cause Power cord ...

  • Ricoh 106 - page 264

    40 TROUBLESHOOTING Printing Status Frequent paper mis- feeds. Part of the image is unclear . Black lines on the printout. Dark areas along the sides of the printout. Printing and Copying ( 2 / 2 ) Page p.10,18 p.14 p.14 p.52 p.52 p.52 Status Abnormal or unex- pected printing results. Parts of the image are not printed out. Cannot print from a secon ...

  • Ricoh 106 - page 265

    41 TROUBLESHOOTING 5. TROUBLE- SHOOTING Copying Page p.3 p.35 p.35 p.35 p.36 p.35 p.6 p.51 p.27 p.34 p.51 p.51 p.34 p.33 p.19 Status "Error 90" appears on the display , and the copy operation is aborted when copying from the exposure glass. Frequent original mis- feeds with ADF . Original is not fed from the ADF . Original is not fed out ...

  • Ricoh 106 - page 266

    42 TROUBLESHOOTING Message “Close cover” “Add paper” “T oner near end” “Add T oner” “Clear paper” “Memory overflow” “Remove original” (when original is set in ADF) “Original left” and “on glass” “Memoly full” and “Press Stop” Cause T op unit is open. Machine is out of paper . Machine is almost out of tone ...

  • Ricoh 106 - page 267

    43 TROUBLESHOOTING 5. TROUBLE- SHOOTING Error Messages ( 2 / 2 ) “Memory full” and “Press Start” “Error 90” “Error XX” T oo many sort copy pages. Locked scanner . Possible machine defect. Press to print pages already stored in memory to cancel the job, press . If you need to print big sort copy jobs, increase memory capacity . Unloc ...

  • Ricoh 106 - page 268

    44 TROUBLESHOOTING 2 1 Clearing a Paper Misfeed This section describes ho w to clear a paper misfeed when one occurs. CAUTION When removing misfed paper , do not touch the fusing section because it could be very hot. Important! Hold a misfed sheet with both hands and slowly pull it out. Do not use a tool, such as a scr ewdriver or tweezers. as this ...

  • Ricoh 106 - page 269

    45 TROUBLESHOOTING 5. TROUBLE- SHOOTING 3 Pressing down on the paper release le- ver (blue) on the right side, pull out the misfed paper . 4 Pull out the misfed paper in the direc- tions indicated by the arrows in the il- lustrations. Note • If you ar e using the paper feed unit (op- tion) and cannot clear the misfeed using this pr ocedure, use t ...

  • Ricoh 106 - page 270

    46 TROUBLESHOOTING T ype 2 Area 1 or 2 1 Pull the top release lever ( 1 ) and open the top unit ( 2 ). 2 Pull out the toner cassette. Note • Be sur e to hold the toner cassette by its handle. • Keep the toner cassette horizontal to avoid spilling the toner . Area 1 Area 2 Area 3 Area 4 1 2 ...

  • Ricoh 106 - page 271

    47 TROUBLESHOOTING 5. TROUBLE- SHOOTING 3 Push back the blue paper release lever located on the right. Note The lever r eleases pr essur e on the paper . If you do not push it back, you could damage the machine when r emoving paper . 4 Pull out the misfed paper in the direc- tions indicated by the arrows in the il- lustrations. Note • If you are ...

  • Ricoh 106 - page 272

    48 TROUBLESHOOTING Area 3 or 4 1 Open the ADF cover . Note Be sur e to open the ADF cover befor e pulling out the misfed original. Failur e to do so can r esult in damage to the original. 2 Pull out the misfed original. 3 Close the ADF cover , and make sure it locks securely into place. Important! If copying was in pr ogr ess, be sure to specify th ...

  • Ricoh 106 - page 273

    49 TROUBLESHOOTING 5. TROUBLE- SHOOTING 2 Pull out the misfed paper . 3 Slide the paper tray back into the paper feed unit until it locks into place. Note For how to set paper in the optional paper feed unit, see page 16. T ip If you cannot find a remedy for unexpected printout results here, check the printer driver's online help for other use ...

  • Ricoh 106 - page 274

    50 TROUBLESHOOTING 3 Pull out the toner cassette. 4 Pull the blue key-shaped pawl located deep inside on the right where the toner cassette was set forward. 5 Install the toner cassette into the ma- chine. 6 Close the top unit. When the top unit is closed, the motor will start running. When the sound of the motor stops, set paper in the origi- nal ...

  • Ricoh 106 - page 275

    51 6 USER MAIN- TENANCE 6. USER MAINTENANCE Daily Maintenance Clean with a damp cloth and wipe dry . Note T urn off the machine befor e cleaning Exposure glass Platen cover (T ype 2) Exposure glass ADF Platen cover Platen (T ype 1) ...

  • Ricoh 106 - page 276

    52 USER MAINTENANCE Replacing the T oner Cassette And the Cleaning Pad P rinting on A4 size paper under the r ecommended temperature and hu- midity conditions noted in the table under “Environment ” on page 1, you can expect a toner cassette to print appro ximately 3,000 pages when you are printing typical business letters that have text co ver ...

  • Ricoh 106 - page 277

    53 USER MAINTENANCE 6. USER MAIN- TENANCE 4 Remove the old cleaning pad. Note Be sur e to grasp the green handle when r e- moving the cleaning pad. 5 Insert the new cleaning pad into place by grasping the green handle. 6 Press down gently but firmly on both sides of the pad to make sure that it is inserted as far as it can go. Do not forget to inst ...

  • Ricoh 106 - page 278

    54 USER MAINTENANCE 9 Make sure the plastic pins (marked with “ * ” in the illustration next to step above) on either side of the toner cas- sette slide along the guides inside the machine. Note Be sur e to hold the toner cassette by its handle. 10 T o close the top unit, press down firmly but gently on both sides of it until the top unit close ...

  • Ricoh 106 - page 279

    55 USER MAINTENANCE 6. USER MAIN- TENANCE Storage Paper P aper should always be stored properly . Improperly stor ed paper might r esult in poor image r eproduction, cr eased copies, or paper misfeeds. G en- erally , avoid paper curling and absorption of moistur e. • A void storing paper in humid areas. In high-temperature and high-humidity , or ...

  • Ricoh 106 - page 280

    56 7. TECHNICAL REFERENCE Printing the Help List Y ou can print out the help list. Prt Help List O K Press Start 1 While the machine is not performing any other operation, press . The message “Prt Help List” appears. 2 Press . 3 Press to print the Help List. Note Print on A4, Letter , or Legal paper . ...

  • Ricoh 106 - page 281

    57 TECHNICAL REFERENCE 7. TECHNICAL REFERENCE Registered Prt Help List O K 2 Language Selecting the Language The language for the display can be selected from the following: 1 Press . 2 Press or until "2 Language" appears. 3 Press and press or until the desired language appears. 4 Press . Note • Do not carry out any operations while “ ...

  • Ricoh 106 - page 282

    58 TECHNICAL REFERENCE 02:0010 Ç 000 Selecting 300 dpi or 600 dpi Set the printer to 300 dpi if the designated output is not obtained when printing using a DOS application compatible with the 300 dpi PCL pr inter . Prt Help List O K 3 User Param. 1 Press . 2 Press or until “3 User Param.” appears. The messages change in the following order . 3 ...

  • Ricoh 106 - page 283

    59 TECHNICAL REFERENCE 7. TECHNICAL REFERENCE Please wait Registered 5 Press . Note • T o cancel this change, pr ess or instead of . “Please wait” and “Not Register ed” appear on the display . • Do not carry out any operations while “Register ed” appears on the display . 100% 01 ...

  • Ricoh 106 - page 284

    60 TECHNICAL REFERENCE Economy Mode The Economy mode can be selected to save po wer . I f no operation is per- formed for 5 minutes, the display becomes blank and all the indicators go out. If no operation is performed in the next 10 minutes or 235 minutes (accor ding to the setting), the heater turns off. The economy mode is on as the default sett ...

  • Ricoh 106 - page 285

    61 TECHNICAL REFERENCE 7. TECHNICAL REFERENCE Selecting T oner Saving Mode The toner saving mode status has two settings. 3 User param. 02:00 10 0 Ç 00 Prt Help List O K 1 Press . “Prt Help List” appears. 2 Press or until “3 User Param.” appears. The messages change in the following order . 3 Press and press to move the flashing block curs ...

  • Ricoh 106 - page 286

    62 T ype 1 Paper Capacity Upper tray plain paper (80 g/m 2 : 20 lb.) 100 sheets Option paper unit plain paper (80 g/m 2 : 20 lb.) 250 sheets Output tray Capacity plain paper (80 g/m 2 : 20 lb.) 50 sheets Memory 4 MB (Expandable to 8 MB, 16 MB or 32 MB) EDO SIMM, 60 ns, 72 pin Dimensions 249mm × 352mm × 576mm (H × W × D) 9.81" × 13.87" ...

  • Ricoh 106 - page 287

    63 SPECIFIC ATIONS 8. SPECIFICA- TIONS Printer Language PCL 5e compatible Print Resolution 600 dpi × 600 dpi 1200 dpi × 600 dpi (enhanced) Print Speed 6 ppm (pages per minute) Paper/Media T ypes Plain paper Envelopes T ransparencies Label paper Paper Weight 60 to 90 g/m 2 (16 to 24 lb) Interface IEEE 1284 Printing Specifications Resident Font • ...

  • Ricoh 106 - page 288

    64 SPECIFIC ATIONS Copy Speed 6 cpm (copy per minute) Warm-up T ime 30 seconds or less First copy 17 seconds or less Mulitiple Copies Up to 99 copies Copy Reduction and Enlargement 50%, 65%, 77%, 93%, LGL LT R 121%, 129%, 155%, 200%, L TR LGL Paper/Media T ypes Plain paper Envelopes T ransparencies Label paper Paper Weight 60 to 90 g/m 2 (16 to 24 ...

  • Ricoh 106 - page 289

    65 INDEX INDEX INDEX 1 1 to 1 Copy ........................................................... 27 A Additional Printer ................................................ 15 Auto image density .............................................. 34 Automatic Document Feeder (ADF) ................... ix Setting an original ................................... ...

  • Ricoh 106 - page 290

    INDEX 66 P Paper and Other Media ......................................... 9 Paper Select ........................................................... x paper size Changing ........................................................ 19 Specifying (upper) ................................... 11, 13 Specifying (lower) ..................................... ...

  • Ricoh 106 - page 291

    Spain RICOH ESP AÑA S.A. Avda. Litoral Mar , 12-14, 08005 Barcelona Phone: +34-(0)93-295-7600 Italy RICOH IT ALIA SpA Via della Metallurgia 12, 37139 V erona Phone: +39-(0)45-8181500 Hong Kong RICOH HONG KONG L TD. 23/F ., China Overseas Building, 139, Hennessy Road, W an Chai, Hong Kong Phone: +852-2862-2888 Singapore RICOH ASIA P ACIFIC PTE.L TD ...

  • Ricoh 106 - page 292

    CLASS 1 LASER PRODUCT IN ACCORDANCE WITH IEC 825 LASER KLASSE 1 nach IEC 825 © Copyright 1999, RICOH CO., L TD. Introduction This manual contains detailed instructions on the operation and maintenance of this machine. T o get maximum versatility from this machine, all operators should carefully read and follow the instructions in this manual. Plea ...

  • Ricoh 106 - page 293

    i Safety Inf or mation When using your machine, the following safety pr ecautions should always be followed. Types of w ar nings used in this manual W ARNING Ignoring this warning could cause ser ious inj ury o r e v e n death. CAUTION Ignoring this caution could cause injur y or damage to property . Symbol examples The d d d d d symbol means a sit ...

  • Ricoh 106 - page 294

    ii • Use of controls or adjustment or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. • Only connect the machine to the power source described on the inside of the front cover . • A void multi-wiring. • Do not damage, break or make any modifications to the power cord. Do not pl ...

  • Ricoh 106 - page 295

    iii CAUTION: • Keep the machine away from humidity and dust. A fire or an electric shock might occur . • Do not place the machine on an unstable or tilted surface. If it topples over , it could cause injury . • When you move the machine, unplug the power cord from the wall outlet to avoid fire or electric shock. • When the machine is not be ...

  • Ricoh 106 - page 296

    iv Energy Star program As an Energy Star partner , we have determined that this machine model meets the Energy Star Guide- lines for energy efficiency . The Energy Star Guidelines intend to establish an international energy- saving system for developing and introducing energy-efficient office equipment to deal with environmen- tal issues, such as g ...

  • Ricoh 106 - page 297

    v Contents Safety Information .............................................................................. i Energy Star program .......................................................................... iv Part Names ......................................................................................... x Operation Panel ...................... ...

  • Ricoh 106 - page 298

    vi Specifying the Paper Size ............................................................... 20 Installing the Paper Size Indicator ................................................. 21 Selecting the Paper Source ............................................................. 22 Upgrading Memory ........................................................ ...

  • Ricoh 106 - page 299

    vii Choosing a Reception Mode .......................................................... 46 F AX Model .......................................................................... 46 TEL Model ........................................................................... 46 Switcing between F AX Mode and TEL Mode ..................... 47 Receving calls ...

  • Ricoh 106 - page 300

    viii 5. COPYING Making a Copy ................................................................................... 70 Making Multiple Copies ..................................................................... 71 Making a Book Copy ......................................................................... 72 Reduction and Enlar gement .............. ...

  • Ricoh 106 - page 301

    ix 8. TECHNIC AL REFERENCE Printing the Help List ......................................................................... 101 Customising Default Settings with the User Parameters .................... 102 Changing the User Parameters ....................................................... 102 User Parameter Switch Summary ........................ ...

  • Ricoh 106 - page 302

    x Part Names Automatic Document Feeder (ADF) Holds up to 10 sheets of paper for automatic feeding. Place originals face down. Platen cover Lift this cover to access the exposure glass when you want to scan a page from a book, magazine, or any other original that cannot be fed using the ADF . Document guides Slide the left guide to fit the size of t ...

  • Ricoh 106 - page 303

    xi GENERAL DESCRIPTION Upper tray extension Extend to support originals. Document output tray Scanned documents are delivered here. Power socket Small size paper feed access panel Scanner lock Locks the scanner to prevent damage during transport. Be sure to release this lock before using the machine. Second Printer (Additional Printer) port Y ou ca ...

  • Ricoh 106 - page 304

    xii <General> 1 1 1 1 1 Display Messages and prompts appear here. 2 2 2 2 2 Fax/Copy key Press to switch between fax operation mode and copy operation mode. The indicators to the left of this key show which mode the machine is currently in. 3 3 3 3 3 Numeric keypad Use these keys to enter the number of copies, dial a fax number or specify val ...

  • Ricoh 106 - page 305

    xiii GENERAL DESCRIPTION 0 0 0 0 0 Zoom keys In copy mode, press these keys to fine-tune the preset reduction and enlargement ratios. Also use to select function settings and navigate the function menus. A A A A A OK key Press to enter values or execute an operation when prompted by a message on the display . B B B B B Original T ype Select key Pre ...

  • Ricoh 106 - page 306

    xiv J J J J J Paper Select key Press to select the copy paper size. When the optional paper feed unit is installed, press to switch between paper sources. <Faxing> K K K K K Receive File indicator Lights to let you know there is received fax data in memory that could not be printed for some reason. ☛ Substitute Reception, page 46. L L L L L ...

  • Ricoh 106 - page 307

    xv GENERAL DESCRIPTION <Printing> Q Q Q Q Q Second Printer key Press this key to select between printing to this machine (indicator off), and printing to a second printer connected to the machine (indicator on). O P N b(GB)6.5_00_x-xvi 99.8.3, 1:12 PM 15 ...

  • Ricoh 106 - page 308

    xvi This page is intentionally blank b(GB)6.5_00_x-xvi 99.8.3, 1:12 PM 16 ...

  • Ricoh 106 - page 309

    1 1. SETTING UP 1. SETTING UP Package Contents Make sur e that all of the items shown in the P ackage Contents sheet that comes with the machine are included. W ARNING Make sure the wall outlet is near the machine and freely accessible so that in event of an emergency it can be unplugged easily . Do not put any metal objects or containers holding w ...

  • Ricoh 106 - page 310

    2 SETTING UP Installing the Star ter T oner Cassette Handle 2 1 1 Pull the top release lever ( 1 ) and open the top unit ( 2 ). 2 Hold the starter toner cassette by its handle, and remove it from its vinyl bag. CAUTION Keep all plastic bags out of the reach of chil- dren. Important! Be sur e to hold the starter toner cassette by its handle. Note Ke ...

  • Ricoh 106 - page 311

    3 SETTING UP 1. SETTING UP 5 Make sure the plastic pins (marked with “ * ” in the illustration next to step 3 ) on either side of the starter toner cas- sette slide along the guides inside the machine. Note Be sur e to hold the starter toner cassette by its handle. 6 T o close the top unit, press down firmly but gently on both sides of it until ...

  • Ricoh 106 - page 312

    4 SETTING UP Installing Other Hardw are Unlocking the Scanner Important Be sur e to unlock the scanner before using the machine. The machine will not operate corr ectly if the scanner is locked. 1 Unlock the scanner by pulling the lever located at the back of the machine. 1 2 Remo ving the Pr otective Sheet 1 Open the ADF cover ( 1 ) and then re- m ...

  • Ricoh 106 - page 313

    5 SETTING UP 1. SETTING UP Installing the Document Output Tray 1 Look at the rear of the machine to con- firm where the document output tray should fit. 2 Insert one end of the document output tray into the slot provided. Then gently bend the tray so the other end fits into the second slot. 3 Make sure the small pieces of plastic film curl upwards ...

  • Ricoh 106 - page 314

    6 SETTING UP Preparing the Output T ray 1 Pull out the output tray extension as shown. Installing the Upper Paper T ray 1 Look at the rear of the machine and note the locations of the slots for in- sertion of the upper paper tray on both sides. 2 T o install the upper paper tray , press down on both sides of the tray , making sure that it is insert ...

  • Ricoh 106 - page 315

    7 SETTING UP 1. SETTING UP Connecting to a Computer Important! Make sur e that the power of both the machine and your computer is turned off befor e making the connection. 1 Plug one end of the provided parallel cable into the lower port on the side of the machine, and secure it in place as shown in the illustration. Note • The machine must be co ...

  • Ricoh 106 - page 316

    8 SETTING UP Connecting the T elephone Line and Op- tional T elephone Handset There ar e two similar sockets located at the rear of the machine. • LINE – the telephone line connection • TEL – for an optional handset when sharing the line with a telephone 1 Plug the line cable into the LINE socket at the rear of the machine. 2 Connect the ot ...

  • Ricoh 106 - page 317

    9 SETTING UP 1. SETTING UP 1 Attach the power cable to the machine and plug the other end into an outlet. 2 T urn on the machine. Note Y ou can select your pr eferr ed language used on the operation panel and on r eports. ☛ Selecting the Language, see page 107. W ARNING • Only connect the machine to the power source described on the inside of t ...

  • Ricoh 106 - page 318

    10 2. GETTING ACQUAINTED Important! ☛ The default display language is English. For how to change to your pr eferr ed language, see page 107 Paper and Other Media The machine supports printing on the following types of paper/media from the upper paper tray . Refer to the follo wing pages for details. Paper/Media type (Paper size) Display Page A4 ( ...

  • Ricoh 106 - page 319

    GETTING ACQUAINTED 2. GETTING ACQUAINTED 11 Loading Paper After you have set up the machine you need to load paper then specify the paper size using the procedur e below . Important! When loading paper into the upper paper tray , do not load mor e than 100 sheets of plain paper (80 g/m 2 or 20 lb). Overloading the upper paper tray can cause misfeed ...

  • Ricoh 106 - page 320

    12 GETTING ACQUAINTED 5 Press . 6 Press . 7 Press . 61 Tray Pap.Size Prt Help List Note If the paper feed unit (option) is installed, r efer to page 19 for details on how to specify the paper size. 8 Press . 9 Press . Then press or until the correct paper size appears. 10 When the correct paper size is on the dis- play , press . If the paper feed u ...

  • Ricoh 106 - page 321

    GETTING ACQUAINTED 2. GETTING ACQUAINTED 13 Loading Small Size Paper Note W e r ecommend that you always feed small size paper vertically with the shorter edge feeding into the machine first. 1 Remove all paper before loading small size paper in the upper paper tray . 2 Open the small size paper feed access panel on the back of the machine by unlat ...

  • Ricoh 106 - page 322

    14 GETTING ACQUAINTED 5 Press . 6 Press . 7 Press . 61 Tray Pap.Size Prt Help List Note If the paper feed unit (option) is installed, r efer to page 19 for details on how to specify the paper size. 8 Press . 9 Press . Then press or until the correct paper size appears. 10 When the correct paper size is on the display , press . Registered A5 : ? Tra ...

  • Ricoh 106 - page 323

    GETTING ACQUAINTED 2. GETTING ACQUAINTED 15 Loading Other Media U se the following procedur es to load envelopes, transparencies, and label paper . Loading En velopes Load up to 5 envelopes at a time using the same procedur e for loading small size paper on page 13. • Insert envelopes print side up with the stamp position as shown. • Envelope f ...

  • Ricoh 106 - page 324

    16 GETTING ACQUAINTED Second (Additional) Printer This machine featur es a port for connecting a second printer . When con- nected, pr ess the key to switch between the two printers. Note Make sur e that the power of your computer is turned off before making the con- nection. Connecting to a Second Printer 1 T urn off both the machine and your sec- ...

  • Ricoh 106 - page 325

    GETTING ACQUAINTED 2. GETTING ACQUAINTED 17 P a per Feed Unit (Option) This section describes how to install the paper feed unit (option) and ho w to load paper in it. Addition of a paper feed unit pr ovides you with a second paper source that holds up to 250 sheets of A4 or Letter size paper . Important! Make sur e that machine power is turned off ...

  • Ricoh 106 - page 326

    18 GETTING ACQUAINTED 3 The machine has handholds at the lo- cations shown in the illustration. Note that the illustration shows the machine as viewed from above. 4 Carefully lower the machine onto the paper feed unit, making sure that the dowels on the paper feed unit fit into holes in the bottom of the machine properly . CAUTION When lifting the ...

  • Ricoh 106 - page 327

    GETTING ACQUAINTED 2. GETTING ACQUAINTED 19 Loading Paper into the Paper Feed Unit Y ou can load either A4 or Letter size paper into the paper feed unit. Refer to page 20 for details on ho w to change the positions of the paper guides inside of the tray to match the type of paper you ar e using. 3 Up to 250 sheets of plain paper (80 g/m 2 or 20 lb) ...

  • Ricoh 106 - page 328

    20 GETTING ACQUAINTED Changing the Paper Size U se the following pr ocedure to set the positions of the paper guides inside the paper tray for either A4 or Letter paper . 1 Squeezing in on both sides of the front guide, slide it to the correct position for the desired paper size. 2 Squeezing in on both sides of the side guide, slide it to the corre ...

  • Ricoh 106 - page 329

    GETTING ACQUAINTED 2. GETTING ACQUAINTED 21 Lower Tray? O K Registered 5 Press . Then press or until the correct paper size appears. 6 When the correct size is on the display , press . 7 Press to return to the standby display . Note The actual message that appears on the ma- chine's display depends on the paper sour ce you last used. If " ...

  • Ricoh 106 - page 330

    22 GETTING ACQUAINTED Selecting the P a per Source 100% U 01 100% L 01 1 Press until the desired pa- per source appears. The upper paper tray is selected when "U" is on the display , and the paper feed unit is selected when "L" is on the display . b(GB)6.5_Chapter 02_p10-24 99.8.3, 1:13 PM 22 ...

  • Ricoh 106 - page 331

    GETTING ACQUAINTED 2. GETTING ACQUAINTED 23 Upgrading Memor y Y ou can install a Single I nline Memory Module (SIMM) to upgrade the on- boar d memor y of the machine. The machine is shipped from the factory with a 4MB SIMM which can be r eplaced with an 8MB, 16MB or 32MB SIMM. U se the following pr ocedure to install an 8MB, 16MB or 32MB SIMM. Note ...

  • Ricoh 106 - page 332

    24 GETTING ACQUAINTED SIMM 4 Carefully lift out the currently installed SIMM board. 5 Angle the new SIMM board as shown in the illustration, and insert it down into the slot. Gently rock it back and forth until you hear it snap into place. Important! Make sur e the SIMM boar d is oriented cor- r ectly when you insert it into the slot. 6 Make sure t ...

  • Ricoh 106 - page 333

    25 3. PRINTING AND SCANNING 3. PRINTING AND SCANNING When connected to a compatible PC, you can use this machine as a high performance laser printer and black and white scanner . Important! • Make sure that your PC parallel port is set to ECP . If it is not, please consult your PC manual on how to change it. Note • For information on PC har dwa ...

  • Ricoh 106 - page 334

    26 PRINTINGAND SCANNING 4 Do one of the following according to your operating system: • Windows ® 95/98 Run the setup application. For example, if your CD-ROM is assigned to D, run “D:Scan- inSetup.exe”. • Windows ® 3.1 First copy the disk images under the directory named “3.1” on the CD-ROM to floppy disks. Then insert the first fl ...

  • Ricoh 106 - page 335

    27 PRINTINGAND SCANNING 3. PRINTING AND SCANNING Features Y ou Can Access Fr om the Pr inter Driver Printer Driver Contents ■ Paper Defaults Paper size : Size, Measurement Unit Page orientation : Portrait, Landscape Output : Copies, Print in reverse order Paper source : Source About ■ N-Up Printing Select a Layout Option : Normal, Reduce for N- ...

  • Ricoh 106 - page 336

    28 PRINTINGAND SCANNING Using the Second Printer (Additional Printer) U se the following procedur e to switch between this machine and a second printer when a second printer is connected. Important! If the second printer has a bi-dir ectional mode, make sure you turn it off. Note Refer to page 16 for details on connecting a second printer . Printin ...

  • Ricoh 106 - page 337

    29 4. F AXING 4. FAXING Y our machine is furnished with superior faxing capabilities and wide a range of powerful fax featur es. Her e are some of the things you can do: • Send and receive fax messages • Store fax numbers you often use and recall them with a single key press • Redial the previous fax number • Share your fax line with a tele ...

  • Ricoh 106 - page 338

    30 F AXING Entering Characters on the Operation Panel Entering Numbers Enter digits when dialling inputting or fax numbers, specifying function codes, or register ing various information, such as your o wn fax number . T o enter digits - , pr ess the appropriate key on the numer ic keypad. E.g. to enter the number 12345678, pr ess 12345678 ☛ Ente ...

  • Ricoh 106 - page 339

    31 F AXING 4. F AXING Note Some special characters in lower case appear identical in upper case on the display due to space limitations. These characters ar e printed correctly on lists and r eports. Deleting Characters and Moving the Cursor When entering names and storing numbers: • T o delete the character to the left of the cursor , pr ess . N ...

  • Ricoh 106 - page 340

    32 F AXING Setting up Please Read This First Before y ou can send or receive fax es you must connect the machine to a telephone line and stor e the following settings: ☛ Own Name/TTI, see page 33. ☛ Dial Mode, see page 34. ☛ Own Fax Number , see page 36. ☛ Date and T ime, see page 38. In addition, you may wish to adjust the following: ☛ S ...

  • Ricoh 106 - page 341

    33 F AXING 4. F AXING Storing your Own Name/TTI S tore y our name or name of your organisation. When you send a fax, this identification appears at the top of the page when printed at the other end. I t is also shown on the other party ’ s display during communication. I t can be up to 32 characters long. ☛ Entering Characters on the Operation ...

  • Ricoh 106 - page 342

    34 F AXING 6 Press . The display opposite will flash briefly on the display and then the function menu will reappear . Note Do not carry out any operations while “Reg- ister ed” appears on the display . 7 Do one of the following: • Enter another function number . • Press to return to standby mode. 1 Press . 2 Press . 3 Press . 4 Press . Prt ...

  • Ricoh 106 - page 343

    35 F AXING 4. F AXING 5 Press or to select Pulse or T one. 6 Press . • If the display opposite does not appear , press to finish. 7 Press or to select whether your fax machine is behind a P ABX. 8 Press . • If you chose “No” in step 7 , proceed to step 12 . • If you chose “Y es”, proceed to step 9 . 9 Enter the digit or digits that gi ...

  • Ricoh 106 - page 344

    36 F AXING 12 Press . The display opposite will flash briefly on the display and then the function menu will reappear . Note Do not carry out any operations while “Reg- ister ed” appears on the display . 13 Do one of the following: • Enter another function number . • Press Help/Function to return to standby mode. Prt Help List Function no.: ...

  • Ricoh 106 - page 345

    37 F AXING 4. F AXING 3 Press . 4 Press . 5 DEnter your own fax number on the numeric keypad. E.g. press Note T o clear the entir e setting, make sur e the cursor is at the far left position then pr ess . The display opposite will appear . Pr ess to clear the setting, or press to cancel this operation. 6 Press . Note Do not carry out any operations ...

  • Ricoh 106 - page 346

    38 F AXING • Enter another function number . • Press Help/Function to return to standby mode. 4 Press . 5 Press . 6 Enter the year on the numeric keypad. E.g. to enter the year 2000, press . 7 Press . 8 Enter the month on the numeric keypad. E.g. press . Day: 01 O K Month: 05 O K Month: 02 O K Year: 00 O K Time: 01:13 O K Year: 99 O K Setting t ...

  • Ricoh 106 - page 347

    39 F AXING 4. F AXING Day: 23 O K Registered 1 Set up O K 9 Press . 10 Enter the date on the numeric keypad. E.g. press . 11 Press . The display opposite will flash briefly on the display and then the function menu will reappear . Note Do not carry out any operations while “Reg- ister ed” appears on the display . 12 Do one of the following: • ...

  • Ricoh 106 - page 348

    40 F AXING Sending Faxes How to Send a Fax This is the basic procedur e for sending a fax message. F or detailed informa- tion and explanations of the advanced featur es available, see the follo wing pages: ☛ Economy Mode, see page 108. ☛ Setting Documents For Faxing, see page 40. ☛ Adjusting Scan Settings, see page 41. ☛ Quick Dials, see p ...

  • Ricoh 106 - page 349

    41 F AXING 4. F AXING 3 Set your document in one of the follow- ing ways: • In the ADF Carefully insert the document stack face-down into the ADF until the display changes to “Dial number”. • Make sure this message appears. If it does not, your document will not be scanned from the ADF . • Lift the platen cover 1 then place the first page ...

  • Ricoh 106 - page 350

    42 F AXING 5 Dial the fax number in one of the fol- lowing ways: • On the numeric keypad. E.g. press . • Press a Quick Dial key with a number stored in it. E.g. press ( ). • Press then enter the first letter of a previ- ously stored Name Dial. E.g. press then press until the Name Dial you require appears. 6 Press . If you set your document in ...

  • Ricoh 106 - page 351

    43 F AXING 4. F AXING 9 Do one of the following: • If all pages of your document have been scanned in, go to step 10 . • If your document contains more than one page, remove the page from the exposure glass and set the next page before the counter on the dis- play reaches zero. Then press or . Wait until the displays opposite appear and re- pea ...

  • Ricoh 106 - page 352

    44 F AXING ● Entering T ones Some organisations offer y ou special services by telephone which you can access using T ouch T one or DTMF tones. T o enter a tone, press the or keys. ☛ Setting the Dial Mode, see page 34. Redialling a Number The machine r emembers the last fax or telephone number dialled with the numeric keys, a Quick D ial or a N ...

  • Ricoh 106 - page 353

    45 F AXING 4. F AXING Automatic Redial If the machine cannot connect to the other party for some reason (e.g. the line is busy) when sending a document from the ADF , it will wait a while and then attempt to dial again. This will be r epeated until the con- nection is made, or the redial count maxi- mum is reached. Note The r edial interval and cou ...

  • Ricoh 106 - page 354

    46 F AXING Receiving Faxes Choosing a Reception Mode This machine has two reception modes: • FAX mode • TEL mode ● F AX Mode In this mode the machine automatically answers incoming calls. When a call is receiv ed, the machine rings a few times to alert y ou that a message is being sent, then starts receiving and printing the message. F AX mod ...

  • Ricoh 106 - page 355

    47 F AXING 4. F AXING ● Receiving calls in TEL Mode When the machine is switched to TEL mode, follow these steps to answer incoming calls. Mode: Recep.? O K Connecting ... Telephone call 1 When the machine rings remove all documents from the ADF then, press or lift the handset and listen. • If you hear a voice and you lifted the habdset, contin ...

  • Ricoh 106 - page 356

    48 F AXING Screening out Unw anted Fax es with A uthor ized Reception This feature lets you scr een out unwanted incoming fax messages. In this manual, the CSI of another machine which you wish to allo w to send you fax messages is r eferred to as a S pecified Sender . When Authoriz ed Reception is turned on, your machine will only r eceive fax mes ...

  • Ricoh 106 - page 357

    49 F AXING 4. F AXING 1 Press . 2 Press . 3 Press . 4 Press . 5 Press or to adjust the setting. 6 Press . The display opposite will flash briefly on the display and then the function menu will reappear . Note Do not carry out any operations while “Reg- ister ed” appears on the display . 7 Do one of the following. • Enter another function numb ...

  • Ricoh 106 - page 358

    50 F AXING Making T elephone Calls If you connect an optional telephone handset, y ou can use the same line for both telephone calls and fax messages. Note If you wish to be able to r eceive telephone calls, be sur e to select TEL mode. ☛ Choosing a Reception Mode, see page 46. 1 Do one of the following: • Pick up the telephone handset and dial ...

  • Ricoh 106 - page 359

    51 F AXING 4. F AXING 2 Listen to the line. • If a voice answers, continue your conversation as normal. • When you wish to send a fax, listen for the fax tone of the other party , then continue from step 3 below . • When you wish to receive a fax, listen for the fax tone of the other party , then continue from step 8 below . ● Sending a Fax ...

  • Ricoh 106 - page 360

    52 F AXING Monitoring the Line while Dialling with On Hook This feature lets you dial a telephone number without lifting the optional external handset. Y ou can listen to what is happening on the line through the machine ’ s internal speaker . Dial/Set orig. Dial number 12345 Dial/Set orig. 1 If necessary , press to switch to fax operation mode. ...

  • Ricoh 106 - page 361

    53 F AXING 4. F AXING 1 Press . 2 Press . 3 Press . 4 Press . 5 Press or to turn Remote Change on or off. 6 Press and do one of the follow- ing: • If you turned Remote Change on, go to step 7 . • If you turned Remote Change off, go to step 8 . 7 Press a digit on the numeric keypad to select the Remote Change digit. E.g. press . 8 Press . The di ...

  • Ricoh 106 - page 362

    54 F AXING Stor ing F ax and T elephone Number s This machine provides two useful methods for stor ing fax and telephone numbers: • Quick Dials • Name Dials Note The maximum length of a fax number you can dial, or store in Quick Dials/Name Dials, is 40 digits. Quick Dials If you often dial certain numbers, you can save time and effort by storin ...

  • Ricoh 106 - page 363

    F AXING 4. F AXING 55 ● Storing Quick Dials ☛ Entering Characters on the Operation Panel, see page xiv . ☛ Entering Pauses and T ones in Fax Numbers, see page 43. Function no.: _ _ B: Printing... 123456789 Prt Help List 1 Press . 2 Press . 3 Press . 4 Press . 5 T o select a Quick Dial, press a Quick Dial key . E.g. press to select Quick dial ...

  • Ricoh 106 - page 364

    56 F AXING 7 Press . 8 Enter or edit the name for this Quick Dial. E.g. press 9 Press . Note Do not turn off the machine while “Please wait” or “Register ed” is shown on the op- eration panel display . 10 Do one of the following: • T o store another Quick Dial, go back to step 5 . • T o return to standby mode, press twice. • T o acces ...

  • Ricoh 106 - page 365

    F AXING 4. F AXING 57 4 Press . 5 Press the Quick Dial key you wish to edit. 6 Press twice then press . Note T o clear the Lefrmost digit, pr ess . Then pr ess . 7 Press . 8 Edit the name stored in this Quick Dial. E.g. Press . • T o move the cursor , press or . 9 Press . Note Do not turn off the machine while “Please wait” or “Register ed? ...

  • Ricoh 106 - page 366

    58 F AXING ● Clearing Quick Dials 1 Press . 2 Press . 3 Press . 4 Press . 5 Press the Quick Dial key you wish to delet E.g. press to select Quick dial ( ). 6 Press . Note If you do not wish to clear this Quick Dial, pr ess twice to r eturn to standby mode. 7 Press . 8 Press twice to return to standby mode. Prt Help List Function no.: _ _ 13 Quick ...

  • Ricoh 106 - page 367

    F AXING 4. F AXING 59 Name Dials N ame Dials are a handy way of storing fax numbers that y ou dial r egularly in machine memory . When you stor e a number in a N ame Dial, you must also give it a name up to 10 characters long. When dialling, you enter the first letter of this name to quickly find the N ame Dial you r equire. Y ou can store multiple ...

  • Ricoh 106 - page 368

    60 F AXING 6 Enter the fax number you wish to store with the numeric keypad. E.g. press 7 Press . 8 Enter or edit the name for this Name Dial. E.g. press 9 Press . Note • Do not turn off the machine while “Register ed” is shown on the operation panel display . • If a Name Dial with the same name is al- r eady stored, “Name exists” will ...

  • Ricoh 106 - page 369

    F AXING 4. F AXING 61 Delete? O K Select letter Marty Delete? O K Function no.: _ _ Delete? 14 Name Dial O K ● Deleting Name Dials 1 Press . 2 Press . 3 Press . 4 Press . 5 Press . 6 Enter the first letter of the Name Dial label. E.g. press . • If Name Dial you are looking for does not ap- pear , keep pressing the key until it does. E.g. press ...

  • Ricoh 106 - page 370

    62 F AXING 9 Do one of the following. • T o delete another Name Dial, go to step 5 . • T o return to standby mode, press twice. • T o access another function, press once and enter another function number . Select letter Marty Main Off ● Dialling with Name Dials Instead of dialling the number on the numeric keypad, do the follo wing in fax o ...

  • Ricoh 106 - page 371

    F AXING 4. F AXING 63 Reports and Lists Pr inting the Journal The J ournal is a recor d of fax messages that wer e recently sent or r eceived by your machine. B y default, it is printed automatically after every 35 commu- nications. Y ou can print it out whenever you wish to check on machine usage, or to find out if a communication was successful o ...

  • Ricoh 106 - page 372

    64 F AXING Printing the Dial List P rint this list to check on the names and numbers of Quick D ials and N ame Dials stor ed in the machine. Y ou can print the Dial list using the procedur e below , or when storing Quick Dials. The following items ar e included on the D ial List: • Own name—this machine’ s Own name/TTI identification • Own ...

  • Ricoh 106 - page 373

    F AXING 4. F AXING 65 • Duration—how long the communication lasted • Result—whether the transmission was successful ☛ T o turn automatic printing of this r eport on or off, see Customising Default Set- tings with the User Parameters, see page 102. Err or Repor t By default, this r eport is printed automatically if a reception or transmis- ...

  • Ricoh 106 - page 374

    66 F AXING Adv anced Features Making Machine Sounds Louder or Quieter This machine makes various sounds during operation. Y ou can adjust the vol- ume of these sounds, or turn them off completely accor ding to y our taste. Y ou can change the following: • TX—the sound of a fax being sent • RX—the sound of a fax being received • On Hook— ...

  • Ricoh 106 - page 375

    F AXING 4. F AXING 67 Registered 3 FaxSwitch O K 22 Slow(4800bps) 4800bps: No? Prt Help List Function no.: _ _ 7 Repeat steps 5 and 6 for all adjust- able volumes. After adjusting the Ring volume and pressing , the display opposite will appear . Now go to step 8 . Note Do not carry out any operations while “Reg- ister ed” appears on the display ...

  • Ricoh 106 - page 376

    68 F AXING 4800bps: Yes? O K Registered 2 Communication O K 5 Press or to adjust the setting. 6 Press . The display opposite will flash briefly on the display and then the function menu will reappear . Note Do not carry out any operations while “Reg- ister ed” appears on the display . 7 Do one of the following: • Enter another function number ...

  • Ricoh 106 - page 377

    F AXING 4. F AXING 69 51 Select O K Function no.: _ _ Mode: Off? O K Mode: On? O K Summer Time O K Registered 5 Select O K Prt Help List 1 Press . 2 Press . 3 Press . 4 Press . 5 Press or until the setting you wish to change appears on the display . E.g. press once. 6 Press . 7 Press or to adjust the change. 8 Press . The display opposite will flas ...

  • Ricoh 106 - page 378

    70 5. COPYING Making a Cop y 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). Alignment of Originals Align the original with the scale of the exposure glass. • When the original is a standar d size such as A4 or Letter , align it to the indexes on the scale. • When y ...

  • Ricoh 106 - page 379

    71 COPYING 5. COPYING Making Multiple Copies 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). 2 Enter the number of copies you wish to make using the numeric keypad. E.g. to make ten copies, press . Note If your document is not scanned in even when you pr ess , ther e is ...

  • Ricoh 106 - page 380

    72 COPYING Making a Book Cop y When copying from a book, the thickness of the book should be no mor e than 30mm (1.18"). 1 Lift the platen cover . 2 Open to the page you want to copy and lay the page face down on the exposure glass. Be sure to align one of the cor - ners of the page with the arrow mark on the scale. 3 Lower the platen cover . ...

  • Ricoh 106 - page 381

    73 COPYING 5. COPYING Reduction and Enlargement P r ess or to select preset reduction or enlargement factors for the copy operation. T o Set the Reduction F actor 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). 2 Press until the desired size ra- tio appears. The sizes c ...

  • Ricoh 106 - page 382

    74 COPYING 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). 2 Press until the desired size ratio appears. The sizes change in the fol- lowing order . 100% → 115% → 122% 200% ← “141% A5 A4” 3 Press to perform the copy opera- tion. Note After copying finishes, pr ...

  • Ricoh 106 - page 383

    75 COPYING 5. COPYING Zoom (In 1% Increments) Zoom allows y ou to tune the pr eset reduction and enlargement factors to ex- actly the value you want. Y ou can change the zoom factor in increments of 1%. T o Use Zoom 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). 2 Pres ...

  • Ricoh 106 - page 384

    76 COPYING Adjusting the Cop y Image T o Select the Resolution/Photo Setting 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). 2 Press the Original T ype Select key to specify the resolution or halftoning method for the copy operation. 3 A pointer ( T ) moves on the displ ...

  • Ricoh 106 - page 385

    77 COPYING 5. COPYING T o Adjust the Image Density 2 1 3 1 Lift the platen cover ( 1 ). Place the original face down at the arrow mark on the scale ( 2 ). Close the platen cover ( 3 ). 3 Press to perform the copy opera- tion. Note After copying finishes, pr ess to clear any settings. 2 Press the Density key to select the im- age density . • Selec ...

  • Ricoh 106 - page 386

    78 COPYING Setting an Or ig inal on the ADF Y ou can load up to 10 sheets of plain paper (80 g/m 2 or 20 lb) at a time into the Automatic D ocument F eeder (ADF). Important! Check to make sur e that the ADF cover is secur ely closed befor e using it. 1 Fan the stack of originals. Never try to place more than 10 sheets of plain pa- per onto the ADF ...

  • Ricoh 106 - page 387

    79 COPYING 5. COPYING 5 Make sure the upper tray extension is pulled out. Originals that do not meet the follo wing requir ements can cause paper misfeeds, and even damage the machine. ■ Requirements • Thickness 0.05mm to 0.2mm (0.002" to 0.08") • Weight 60 to 90 g/m 2 (16lb to 24lb) • Clear markings Markings on the originals must ...

  • Ricoh 106 - page 388

    80 COPYING Sor ting Output The following example shows ho w output is affected b y turning sorting on and off. Important! The sort operation r equires scanning of all your originals into memory befor e starting the copy operation. The number of originals that can be scanned at one time depends on how much memory you have installed. Refer to page 23 ...

  • Ricoh 106 - page 389

    81 COPYING 5. COPYING 3 When you press to start the copy operation, all of the originals on the ADF are scanned into memory before they are printed. Note After copying finishes, pr ess to clear any settings. b(GB)6.5_Chapter 05_p76-81 99.8.3, 1:17 PM 81 ...

  • Ricoh 106 - page 390

    82 6. TROUBLESHOOTING General Status Nothing happens when the machine is turned on. Paper misfeeds when the machine is turned on for the first time after the installation. After installing a SIMM board, the memory value that appears on the machine's display does not match the amount of memory in- stalled. Cause Power cord is not con- nected. S ...

  • Ricoh 106 - page 391

    83 TROUBLESHOOTING 6. TROUBLE- SHOOTING Printing Status Frequent paper mis- feeds. Part of the image is unclear . Black lines on the printout. Dark areas along the sides of the printout. Printing and Copying ( 2 / 2 ) Page p.11,19 p.15 p.15 p.97 p.97 p.97 Status Abnormal or unex- pected printing results. Parts of the image are not printed out. Cann ...

  • Ricoh 106 - page 392

    84 TROUBLESHOOTING Page p.3 p.41,78 p.41,78 p.41,78 p.79 p.78 p.41,78 p.5 p.97 p.70 p.77 p.96 p.96 p.77 p.76 p.20 Status "Error 90" appears on the display , and the copy operation is aborted when copying from the exposure glass. Frequent original mis- feeds with ADF . Original is not fed from the ADF . Original is not fed out properly . P ...

  • Ricoh 106 - page 393

    85 TROUBLESHOOTING 6. TROUBLE- SHOOTING Copying and Faxing (2/2) Remedy T urn on the power . Check the line connection. Make sure that one end of the line cable is connected to the LINE socket at the rear of the machine and the other to your telephone line socket. Make sure you have selected the correct line type (pulse or tone). If behind a P ABX, ...

  • Ricoh 106 - page 394

    86 TROUBLESHOOTING Message “Close cover” “Add paper” “T oner near end” “Add T oner” “Clear paper” “Memory overflow” “Remove original” (when original is set in ADF) “Original left” and “on glass” Cause T op unit is open. Machine is out of paper . Machine is almost out of toner . T oner cassette is not loaded corre ...

  • Ricoh 106 - page 395

    87 TROUBLESHOOTING 6. TROUBLE- SHOOTING Message Cause Remedy Error Messages ( 2 / 4 ) Page “Memory full” and “Press Stop” “T ransm.error” and “Press Stop” “T oo many numbers” “No connection” “No loop current” “Printer in use” “Machine busy” T oo much sort copy data. T oo many sort copy pages. An error occurred du ...

  • Ricoh 106 - page 396

    88 TROUBLESHOOTING Message Cause Page Error Messages ( 3 / 4 ) Remedy “Name exists” “Unable” “Check fax no.” and “Press Stop” “No dial tone” “Set A4 paper” “Set paper size” “Error” and “Press Stop” “Not registered” “Name: No entry” The name you input for this Name Dial already ex- ists. The machine is una ...

  • Ricoh 106 - page 397

    89 TROUBLESHOOTING 6. TROUBLE- SHOOTING Message Cause Page Error Messages ( 4 / 4 ) Remedy If you have a pr oblem with the machine and you cannot resolve it by r eferring to the information in this chapter , please contact your service repr esentative. If an “Err or XX” message is displayed, be sur e to turn off the machine befor e calling. “ ...

  • Ricoh 106 - page 398

    90 TROUBLESHOOTING When the Receive File Indicator is Lit This indicator lights to inform you that a page of an incoming fax message could not be printed for some r eason (e.g. paper has run out) and that page has been stored in memory . Important! The machine cannot r eceive any more messages until you solve the pr oblem. T urning off the power wi ...

  • Ricoh 106 - page 399

    91 TROUBLESHOOTING 6. TROUBLE- SHOOTING Clearing a Paper Misfeed This section describes ho w to clear a paper misfeed when one occurs. CAUTION When removing misfed paper , do not touch the fusing section because it could be very hot. Important! Hold a misfed sheet with both hands and slowly pull it out. Do not use a tool, such as a scr ewdriver or ...

  • Ricoh 106 - page 400

    92 TROUBLESHOOTING 3 Push back the blue paper release lever located on the right. Note The lever r eleases pressur e on the paper . If you do not push it back, you could damage the machine when r emoving paper . 4 Pull out the misfed paper in the direc- tions indicated by the arrows in the il- lustrations. Note • If you ar e using the paper feed ...

  • Ricoh 106 - page 401

    93 TROUBLESHOOTING 6. TROUBLE- SHOOTING Clearing a Misfeed in the ADF 1 Open the ADF cover . Note Be sur e to open the ADF cover befor e pulling out the misfed original. Failur e to do so can r esult in damage to the original. 2 Pull out the misfed original. 3 Close the ADF cover , and make sure it locks securely into place. Important! If copying w ...

  • Ricoh 106 - page 402

    94 TROUBLESHOOTING T ip If you cannot find a remedy for unexpected printout results here, check the printer driver's online help for other useful information. When Paper Will Not F eed If paper has completely stopped feeding, check using the follo wing proce- dure. 1 Remove all paper . 2 Pull the top release lever 1 and open the top unit 2 . 3 ...

  • Ricoh 106 - page 403

    95 TROUBLESHOOTING 6. TROUBLE- SHOOTING 4 Pull the blue key-shaped pawl located deep inside on the right where the toner cassette was set forward. 5 Install the toner cassette into the ma- chine. 6 Close the top unit. When the top unit is closed, the motor will start running. When the sound of the motor stops, set paper in the origi- nal position a ...

  • Ricoh 106 - page 404

    96 7. USER MAINTENANCE Daily Maintenance Clean with a damp cloth and wipe dry . Note T urn off the machine befor e cleaning Exposure glass ADF Platen cover Platen b(GB)6.5_Chapter 07_p96-100 99.8.3, 1:18 PM 96 ...

  • Ricoh 106 - page 405

    97 USER MAINTENANCE 7. USER MAIN- TENANCE Replacing the T oner Cassette And the Cleaning P ad P rinting on A4 size paper under the r ecommended temperature and hu- midity conditions noted in the table under “Environment ” on page 1, you can expect a toner cassette to print appro ximately 3,000 pages when you are printing typical business letter ...

  • Ricoh 106 - page 406

    98 USER MAINTENANCE 4 Remove the old cleaning pad. Note Be sur e to grasp the gr een handle when r e- moving the cleaning pad. 5 Grasp the new cleaning pad by the green handle and insert it into place. 6 Press down gently but firmly on both sides of the pad to make sure that it is inserted as far as it can go. Do not forget to install the cleaning ...

  • Ricoh 106 - page 407

    99 USER MAINTENANCE 7. USER MAIN- TENANCE 9 Make sure the plastic pins (marked with “*” in the illustration next to step above) on either side of the toner cas- sette slide along the guides inside the machine. Note Be sur e to hold the toner cassette by its handle. 10 T o close the top unit, press down firmly but gently on both sides of it unti ...

  • Ricoh 106 - page 408

    100 USER MAINTENANCE Storage P a per P aper should always be stor ed properly . Improperly stor ed paper might r esult in poor image r eproduction, cr eased copies, or paper misfeeds. G en- erally , avoid paper curling and absorption of moistur e. • A void storing paper in humid areas. In high-temperature and high-humidity , or low- temperature a ...

  • Ricoh 106 - page 409

    101 8. TECHNICAL REFERENCE 8. TECHNICAL REFERENCE Printing the Help List P rint this list to get a quick guide to fr equently used fax features. Prt Help List O K Press Start 1 While the machine is not performing any other operation, press . 2 Press . 3 Press to print the Help List. Note Print on A4, Letter , or Legal paper . b(GB)6.5_Chapter 08_p1 ...

  • Ricoh 106 - page 410

    102 TECHNICAL REFERENCE 1 Press . 2 Press . 3 Press . 4 Press . 5 Press or until the switch you wish to edit appears. E.g. press twice to show switch 02. Prt Help List Function No.:__ 52 User Param. O K Customising Default Settings with the User Parameters Changing the User Parameters The U ser Parameters allo w you to customise various machine set ...

  • Ricoh 106 - page 411

    103 TECHNICAL REFERENCE 8. TECHNICAL REFERENCE Registered 5 Select O K 02 :1110 1000 O K 6 T o toggle the value of a single bit, press the number on the numeric keypad that corresponds to the number of the bit you wish to change. E.g. press to change bit 3. 7 Press . The display opposite will flash briefly on the display and then the function menu ...

  • Ricoh 106 - page 412

    104 TECHNICAL REFERENCE SWITCH 00 ( 2 / 2 ) Explanation Automatically print the Journal after every 35 com- munications Print the Unauthorized Call Report when an unregis- tered caller tries to send you a fax ( when Author - ized Reception is switched on) Do not change this setting Automatically reduce re- ceived images to fit page Default Yes No Y ...

  • Ricoh 106 - page 413

    105 TECHNICAL REFERENCE 8. TECHNICAL REFERENCE Explanation PCL Resolution Set the printer to 300 dpi if the designated output is not obtained when printing using a DOS application compatible with the 300 dpi PCL printer . T oner Saving mode When T oner Saving is turned on, the machine prints using less toner . Use this mode if you wish to save on t ...

  • Ricoh 106 - page 414

    106 TECHNICAL REFERENCE Function List Function Number Function Name Page Reference 11 Date/T ime 38 12 Dial Mode 34 13 Quick Dial/Print Dial List 54 14 Name Dial 59 15 Language 107 16 Own name/TTI 33 17 Own Fax No. 36 21 Authorized Reception 49 22 Slow (4800bps) 67 31 Adjust V olume 66 32 Remote Change 52 41 Journal 63 42 Dial List 64 51 Page Heade ...

  • Ricoh 106 - page 415

    107 TECHNICAL REFERENCE 8. TECHNICAL REFERENCE Registered Prt Help List 15 Language Selecting the Language 1 Press . 2 Press . 3 Press and press or until the desired language appears. 4 Press . Note • Do not carry out any operations while “Register ed” appears on the display . • If you do not pr ess , the setting is not changed. 5 Press to ...

  • Ricoh 106 - page 416

    108 TECHNICAL REFERENCE Economy Mode Economy mode is a pow er saving feature and is tur ned on by default. If no operation is performed for 5 minutes, the display becomes blank and all the indicators go out. If no operation is performed in the next 10 minutes or 235 minutes (accor ding to the setting), the heater turns off. Economy mode Heater turn ...

  • Ricoh 106 - page 417

    109 9. SPECIFICA- TIONS Paper Capacity Upper tray plain paper (80 g/m 2 : 20 lb.) 100 sheets Optional paper unit plain paper (80 g/m 2 : 20 lb.) 250 sheets ADF (Auto Document Feeder) Capacity plain paper: A4, L T · LG (80 g/m 2 : 20 lb) 10 sheets Output tray plain paper (80 g/m 2 : 20 lb.) 50 sheets Memory 4 MB (Expandable to 8 MB, 16MB or 32MB) E ...

  • Ricoh 106 - page 418

    110 SPECIFIC ATIONS Printer Language PCL 5e compatible Print Resolution 600 dpi × 600 dpi 1200 dpi × 600 dpi (enhanced) Print Speed 6 ppm (pages per minute) Paper/Media T ypes Plain paper Envelopes T ransparencies Label paper Paper Weight 60 to 90 g/m 2 (16 to 24 lb) Interface IEEE 1284 Printing Specifications Resident Font • Dutch 801 SWC • ...

  • Ricoh 106 - page 419

    111 SPECIFIC ATIONS 9. SPECIFICA- TIONS Copy Speed 6 cpm (copies per minute) Warm-up T ime 30 seconds or less First copy 17 seconds or less Mulitiple Copies Up to 99 copies Copy Reduction and Enlargement 50%, 71%, 82%, 87%, 93%, 115%, 122%, 141%, 200% Paper/Media T ypes Plain paper Envelopes T ransparencies Label paper Paper Weight 60 to 90 g/m 2 ( ...

  • Ricoh 106 - page 420

    INDEX 112 INDEX 1 1 to 1 Copy ........................................................... 70 A Additional printer ................................................ 16 Auto image density .............................................. 77 Automatic Document Feeder (ADF) ..................... x Setting an original ....................................... ...

  • Ricoh 106 - page 421

    113 INDEX INDEX Loading Plain paper ..................................................... 11 Small size paper ............................................. 13 Other media ................................................... 15 Location ................................................................. 1 M Metal plate ................................. ...

  • Ricoh 106 - page 422

    INDEX 114 EE G027 S Safety information ................................................ i Scanner lock .......................................................... x Unlocking ......................................................... 4 Second (Additional) printer ................................ xi Connecting ......................................... ...

Manufacturer Ricoh Category Copier

Documents that we receive from a manufacturer of a Ricoh 106 can be divided into several groups. They are, among others:
- Ricoh technical drawings
- 106 manuals
- Ricoh product data sheets
- information booklets
- or energy labels Ricoh 106
All of them are important, but the most important information from the point of view of use of the device are in the user manual Ricoh 106.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Ricoh 106, service manual, brief instructions and user manuals Ricoh 106. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Ricoh 106.

Similar manuals

A complete manual for the device Ricoh 106, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Ricoh 106 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Ricoh 106.

A complete Ricoh manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Ricoh 106 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Ricoh 106, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Ricoh 106, that we can find in the current document
3. Tips how to use the basic functions of the device Ricoh 106 - which should help us in our first steps of using Ricoh 106
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Ricoh 106
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Ricoh 106 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Ricoh 106?

Use the form below

If you did not solve your problem by using a manual Ricoh 106, ask a question using the form below. If a user had a similar problem with Ricoh 106 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)