English dropdown-ico

Manual Q-See QH32DVR4C

90 pages 4.9 mb
Download

Go to site of 90

Summary
  • Q-See QH32DVR4C - page 1

    QH32DVR4C User ’ s Manual 1 QH32DV R4C Net DVR Bundle User ’ s Manual V2.1 Contact U s: Q-See Products 8015 E. Cr ysta l Dr Anaheim, CA 92807 W ebsite: http://www .q-see.com Customer Ser vice: Phone: 877-998-344 0 x 538 Email: cs@dps i-usa.com T ec h Suppor t: Phone: 877-998-344 0 x 539 Email: ts@dpsi -usa.com Fa x: 714-998-3509 Rev 101107 ...

  • Q-See QH32DVR4C - page 2

    QH32DVR4C User ’ s Manual 2 Index Chapter 1 Product Int rod ucti o n .......................... ........................................................................ ... 5 1.1 Summary ............................................ ........................................................................... 5 1.2 Features ......................... ...

  • Q-See QH32DVR4C - page 3

    QH32DVR4C User ’ s Manual 3 Chapter 6 Utiliti es ........................................................... ............................................................. 71 6.1 Restore Paramet ers ..... ............ .......... ............ ......... ............. ......... .......... ............ ......... . 71 6.2 Upgrade ..... ................ ...

  • Q-See QH32DVR4C - page 4

    QH32DVR4C User ’ s Manual 4 Thank y ou for purchasing our Net DVR. T his manual applies to the QH32DVR4C model. Please read this Manual carefully to e nsure th at you can use the device correctly and s afely . The contents of this Manual are subject to change without notice. Contact Us: Q-See Products 8015 E. Cr ystal Dr Anaheim, CA 92807 We bsit ...

  • Q-See QH32DVR4C - page 5

    QH32DVR4C User ’ s Manual 5 Chapter 1 : Pro duct Intro duct ion 1.1 Summar y The QSC26404 network digital video r ecorder is a n excellent digital surveillance product. It uses embedded MCU and Linux, comb inin g the most a d vanced technology in the Information Industry such as video and a udi o encodi ng/decoding, hard d isk recording a nd TCP/ ...

  • Q-See QH32DVR4C - page 6

    QH32DVR4C User ’ s Manual 6 Prev iew & Playback Functions : Supports one com posite and one spot vide o output, and one VGA output. Supports fast/ slow playback, pause, forward, backward, fra me by frame, etc. Uses define pre view layout. Supports one cha nnel playback Network Functions : Supports TCP , UTP , R TP , Multicast, DHCP , etc. Sup ...

  • Q-See QH32DVR4C - page 7

    QH32DVR4C User ’ s Manual 7 Chapter 2: Install ation W ar ning: Before you ins tall the DVR, please make s ur e the power to the DVR i s switched off. 2.1 Chec king the DVR a nd Its Acces sories When you get the product, check that all the items are included in your product package. The Package should include: 1-QSC26404 D VR 1-5 wa y power suppl ...

  • Q-See QH32DVR4C - page 8

    QH32DVR4C User ’ s Manual 8 2.3 Rear Panel De scription Fig 2-1 QSC26404 Rear Panel 1- V ideo in 2- V ideo out 3-VGA video out 4- Ala rm ou t 5- RS485 T+ T - R+ R- 6- Power sw itch 7-USB 2.0 Port 8- Audio in 9- Audio out 10- Ethernet port 1 1- Alarm in 12- +12V DC po w er supply 2.4 System S etup ...

  • Q-See QH32DVR4C - page 9

    QH32DVR4C User ’ s Manual 9 Chapter 3: Operati onal Instruc tions 3.1 Front Panel Fig 3-1 Front Panel Form 3-1 It ems on Front Panel Index T y pe Name Description 1 Light IR receiver for remote c ontrol. 2 St atus Lights Power ST A TUS Tx/Rx Green means DVR is working; Red means DVR is p ower ed off; Green means you can use IR remote control. Bli ...

  • Q-See QH32DVR4C - page 10

    QH32DVR4C User ’ s Manual 10 SHIFT 1. Manual record; 2. SHOT in PTZ control (adjust preset). 1. Enter into PTZ cont ro l m ode; 2. IRIS- in PTZ control.. 1. Multi screen preview switch; 2. Switch m en u mode into pre view; FOCUS- in PTZ contr o l. 1. Input switch (number , lower case, upper case and symbol); 2. FOCUS+ in PTZ control; 3. In previe ...

  • Q-See QH32DVR4C - page 11

    QH32DVR4C User ’ s Manual 1 1 3.2 IR Remote C ontrol Fig 3-2 IR Re mote Control Layout Form 3-2 Func tions of Remote Control Index Name Description 1 POWER T urnoff device. 2 DEV Enable/Disable IR r em o te control 3 Numeric Keys Same as num eric k eys on front panel. 4 EDIT Same as EDIT key on front panel. 5 A Same as A key on front panel. 6 REC ...

  • Q-See QH32DVR4C - page 12

    QH32DVR4C User ’ s Manual 12 14 ESC Same as ESC key on fr ont panel. 15 Reserved 16 F1 Same as F1 ke y on front panel. 17 Lens control IRIS, FOCUS ZOOM for lens control on PTZ camera. 18 F2 Same as F2 ke y on front panel. Loading the Batteries Into the Remote Contr ol 1. Remove the battery cover . 2. Insert the battery . Make sure that the poles ...

  • Q-See QH32DVR4C - page 13

    QH32DVR4C User ’ s Manual 13 3.3 Menu Descripti on 3.3.1 Menu Opt ions Form 3-3 List of Menu Options Menu Name Function Menu Name Function Display Unit name Device ID Require passw o rd Screen saver V ideo standard Enable scalar Brightness Menu transparency VGA resolution Date and Ti me Preview Image Select camera Camera name Color setup Date - s ...

  • Q-See QH32DVR4C - page 14

    QH32DVR4C User ’ s Manual 14 3.3.2 Menu Opera tion How to Enter Into Menu Mode  Press MENU key to enter into DVR main menu.  Press PLA Y short ke y to enter into playback me nu.  Press R EC short key to enter into manual record menu.  Press PT Z short k ey to enter into PTZ control interfac e. Note: Y ou must input user name and p ass ...

  • Q-See QH32DVR4C - page 15

    QH32DVR4C User ’ s Manual 15 Fig 3.4 Camera input a djustments Each men u cont ains different k inds of items. There is a small highlighted fra me called the “Ac tive Frame” wh ich is used to point to th e selected item. T his “Active Frame” can be moved by direction keys ( ) . The dif fere nt kinds of menu items are: 1. Check Box : Provi ...

  • Q-See QH32DVR4C - page 16

    QH32DVR4C User ’ s Manual 16 c) Use EDIT k ey to delete the character in f ront of cursor; d) Press E NTER to save & exit or ESC to exit without saving. 4. Button: T rigger a specific func tion or enter into ne xt sub-menu. For example, press “Polic y” button to enter into sub-menu. Press Confirm to save pa rameters and return to parent m ...

  • Q-See QH32DVR4C - page 17

    QH32DVR4C User ’ s Manual 17 Chapter 4: Basic O peration Gu ide 4.1 Power O n Note: Please make sure the power supply is the c orr ect one for the DVR and the AC adapter is connec ted c orr ectly . Before swi tching DVR on, ple ase co nnect one monitor to VOUT or VGA interface, otherwise you can not see graphic use r interface and can not operate ...

  • Q-See QH32DVR4C - page 18

    QH32DVR4C User ’ s Manual 18 Fig 4.1 Recording status Form 4-1 Camera record sta tus Icon Icon Color S tatus Description White N o vi deo sign al Y ellow V ideo input Pink Manual recording Green Real tim e r ecording Blue Motion detection re c ording Red External ala r m r eco rd ing ...

  • Q-See QH32DVR4C - page 19

    QH32DVR4C User ’ s Manual 19 Fig 4.2 Alarm status Form 4.2 Cam era ala rm status Icon Icon Color S tatus Description White V ideo signal lost Y ellow V iew tampering alarm Pink Motion & Ext ernal alarm Green No alarm Blue Motion alarm Red External alarm Press numeric keys to switch to individual camera view . For exa mple, press 2 key to view ...

  • Q-See QH32DVR4C - page 20

    QH32DVR4C User ’ s Manual 20 4.3 User Name an d Passw ord Note: When the DVR is delivered f rom the fac tory , ther e is only one default administrator n a med “adm in”, and the passwor d is “12345”. The administrator ’ s name can not be modified, w hile the password c an be modified. The administrator can create 15 users and define the ...

  • Q-See QH32DVR4C - page 21

    QH32DVR4C User ’ s Manual 21 Fig 4.5 Ma in menu S tep 2: Select the user name by using , then move th e “Active Frame” to “Password” icon by using  /  keys. As fi g 4.6 shows: Fig 4.6 C hange users’ password ...

  • Q-See QH32DVR4C - page 22

    QH32DVR4C User ’ s Manual 22 S tep 3: Input new password Use numeric keys to input new pass word. The password can be blank. It also can be 1 6 numbe rs. Press ENTER to e xit e dit box, and move to “ V erify” item to verify password . Note: In edit box, use     /     to move cursor and EDIT key to delete the number in ...

  • Q-See QH32DVR4C - page 23

    QH32DVR4C User ’ s Manual 23 Currently c ontrolled c amera’ s na me is displayed in the position is selected by the user . Select Channel In PTZ control mode, you can press numeric ke ys to select channel. For example; press 2 key to select the PTZ camer a on channel 2. After you select t he PTZ camera, you can use the c ontrol keys to control ...

  • Q-See QH32DVR4C - page 24

    QH32DVR4C User ’ s Manual 24 S ta rt/S top Auto in PTZ Co ntr o l Mode In PTZ control mode , press P LA Y/AUTO key to start PTZ auto function. Press PLA Y/AUT O key a gain to stop. When PTZ is in a uto mode, i f you e xit PTZ control mode, PTZ will continue auto function unless y ou enter into PTZ control mode ag a in, and press PLA Y/AUT O key t ...

  • Q-See QH32DVR4C - page 25

    QH32DVR4C User ’ s Manual 25 Description Manual rec ord interface has the following pa rts: channel num ber , channel status, start/stop record, s tart all and stop all buttons. Channel : Lists the cha nnel numbers that the DVR ha s. S tatus : Channel work status has 4 status options: means idle. G reen mea ns the channel is recording (including ...

  • Q-See QH32DVR4C - page 26

    QH32DVR4C User ’ s Manual 26 Description Select a Channel: Move the “ Active Frame” to “c han”, press “e dit” button, then use or key to select a cha nnel. Rec T ype : Use or to select recorded file type. The file type options are “All”, “All T ime”, “Motion Detect”, “ Alarm” and “Manual”. Time Secti on : Y ou c an ...

  • Q-See QH32DVR4C - page 27

    QH32DVR4C User ’ s Manual 27 At the bottom of the image, there is an information bar and the following information is include d: V olume, Play Progress, Play Speed, Played T ime and File T otal T ime. Display/Hide i nformation bar: MENU Open/Clo s e s ound: PL A Y Adjust play progress: (Backw ard), (Forward). The unit is “%”. Adjust play spee ...

  • Q-See QH32DVR4C - page 28

    QH32DVR4C User ’ s Manual 28 Playback W it h Mo use Attached If you playback with a mouse attached t he interface will be a l ittle diff e rent, and you can acquire m ore functions to operate in t he playba ck menu, shown in fig 4. 1 1: Fig 4.11 Play ba c k control bar There is an ad ditional bar that appears. W e call it the control bar . Contr ...

  • Q-See QH32DVR4C - page 29

    QH32DVR4C User ’ s Manual 29 4.7 Bac kup Recorde d Files Note: The user must have “Playback” rights. Please c onnect backup devices before you start to backup. In the playback interface, you can backup the recorded files. In the preview mode , press PLA Y key , in the login dia log box, select username and input the correc t password, you wil ...

  • Q-See QH32DVR4C - page 30

    QH32DVR4C User ’ s Manual 30 Fig 4.12 Playba ck list S tep 3: Select backup device Please confirm t he backup device: USB flash me mory , USB HDD, U SB DVD/CD-R W , and se lect the corresponding backup device. S tep 4: S tart and finish backup Move “Active Fram e” to “Save” button and press ENTER key to start bac kup . When backup s ta rt ...

  • Q-See QH32DVR4C - page 31

    QH32DVR4C User ’ s Manual 31 Playback the vi deo segm e nt Y o u can use our file player software to playback the video segment on a PC. Y ou can find the player software on the included CD. Exit playback interface Please refer to C hapt e r 4.6. 4.8 Shut ting Dow n the DVR Note: Do not switch off the power directly by turning off the power switc ...

  • Q-See QH32DVR4C - page 32

    QH32DVR4C User ’ s Manual 32 Chapter 5: Param eters Setu p Guide Only the users that have “Parameters Setup” right need to read t his chapter . When the f ollowing parameters a re modified and saved, you m ust reboot the DVR to m ake the new parameters ef fective. O ther parameters do not require a reboot.  Any network para meters  Reso ...

  • Q-See QH32DVR4C - page 33

    QH32DVR4C User ’ s Manual 33 Fig 5.1 Ente r into user menu Move “ Active Fram e” to “ User” icon, press ENTER key to enter into “User Management” me nu shown in fig 5.2 Fig 5.2 User managem ent ...

  • Q-See QH32DVR4C - page 34

    QH32DVR4C User ’ s Manual 34 In the user name list box, by default only “admin” exist s . Y ou can use key , to move “Active Frame” to password edit box, and press EDIT key to enter into edit s tatus. Press numeric ke ys to i nput a new password. The pa ssword is made up of 16 numbers a t most. After you finish inputting password, press E ...

  • Q-See QH32DVR4C - page 35

    QH32DVR4C User ’ s Manual 35 Fig 5.4 user managem ent S tep 2: Add new user name In the “User Mana gement” menu, move “Active Frame” to “A dd” button and press ENTER , in the pop-up di alog box input the new user name (ref er to Chapter 3.4), press ENTER a nd return to “User Mana ge m ent” menu. A total of 15 users can be added. S ...

  • Q-See QH32DVR4C - page 36

    QH32DVR4C User ’ s Manual 36 S tep 3: Setup the right s fo r new user The new added user does n ot have any operational rights. Y ou must setup rights for him. In the use r ’ s li st box of “User Management” menu, u se   keys to select the new user name, then use  key to “Default Privileges” button , press ENTER , the user will ...

  • Q-See QH32DVR4C - page 37

    QH32DVR4C User ’ s Manual 37 User ri ghts description “Local”: Local rights a re for local operation, s uch as using the fr ont panel, remote con trol and RS-485 keyboard. PTZ cont rol: Locally control PTZ came ras; Record: Manual start/stop recording; Set para meters Setup: Locally setup the DVR parame ters; Log: Locally view the log on DVR; ...

  • Q-See QH32DVR4C - page 38

    QH32DVR4C User ’ s Manual 38 Fig 5.7 Delete user 5.3 Unit Name and D evice ID Unit Nam e In the “Dis play” menu, shown as fig 5.8: Fig 5.8 Displa y menu There is an i tem called “ Unit N ame”. The d efault unit name i s “Embe dded Net DVR”. Move “ Active Frame” to unit nam e edit box, press EDIT key to enter into edit s tatus, you ...

  • Q-See QH32DVR4C - page 39

    QH32DVR4C User ’ s Manual 39 Device ID: When you use the remote c ontrol to operate the DVR, you m ust use the device ID to select the DVR. The defaul t device ID is “ 88”. If there is more tha n one DVR in one place, p lease setup different device IDs for each DV R, othe rwis e the r em ote control will control al l the DVRs with the same de ...

  • Q-See QH32DVR4C - page 40

    QH32DVR4C User ’ s Manual 40 5.5 Came ra name a nd OSD (On Screen Dis pla y ) Setup Camera Nam e In “Camera” me nu, you can input a name for each camera. See fig 5.9 Please note tha t a camera’ s name can not be copied. Fig 5.9 Input cam er a num ber The ste ps to setup camera name: S te p 1: Select a camera. S te p 2: Move “Active Fram e ...

  • Q-See QH32DVR4C - page 41

    QH32DVR4C User ’ s Manual 41 S te p 1: Enter into “Camera” menu. S te p 2: Select a camera. S te p 3: Enable the check box on the right side of ca mera name, then move “Active Frame” to “Position” button, press ENTER to enter i nto camera name position setup interfac e, as shown below , in that interface you can use     ke ...

  • Q-See QH32DVR4C - page 42

    QH32DVR4C User ’ s Manual 42 Date OSD Positi on In “Camera” menu you c an adjust the position where you want the Dat e to display , m ove active frame to “Positi on” on the right side of “ Date OSD” a nd pr ess the ENTER button. Then you will see the picture be low . Use to adjust the pos ition of the date. Fig 5.1 1 Set positi on of ...

  • Q-See QH32DVR4C - page 43

    QH32DVR4C User ’ s Manual 43 Fig 5.12 Col or setu p S te p 2: Select camera: Please use   ke ys to select a camera. S te p 3: Adjust brightne ss, contrast, saturation and hue: M ove “ Active Frame” to the “Adjust” button on the right side of Bri ghtness, Co ntrast, Sat uration and Hue, press ENTER key , y ou will enter into the corr ...

  • Q-See QH32DVR4C - page 44

    QH32DVR4C User ’ s Manual 44 5.7 Mas k Area Setup In som e cas es you might want t o mask a sensitive area. This area will not be viewed or recorde d. T he ma sk area setup steps are as follows: S te p 1: Enter into “Camera” menu: S te p 2: Select a camera: Y ou ca n use   ke ys to select the camera. S te p 3:Enter into “Advanced sett ...

  • Q-See QH32DVR4C - page 45

    QH32DVR4C User ’ s Manual 45 After you finish setup, press ENTER key to return to “Advanced settings” menu. Y ou can press A ke y to clear all mask areas. S te p 5: S a ve mask area: Y ou c a n repeat step 2, step 3 and s tep 4 to setup mask area for other cameras. In “Advanced setting” menu, press the “Confirm” button to save the mas ...

  • Q-See QH32DVR4C - page 46

    QH32DVR4C User ’ s Manual 46 5.8 V iew T a mpering Al arm If you enable this function, when so meone blocks the camera spitefully , the DVR will send a warning alarm. S t ep 1: Enter into “Cam era” menu: S tep 2: Select cam era: Please use   k eys to select a camera. S tep 3: Select sensi t i vity: move active frame to sensitivity item ...

  • Q-See QH32DVR4C - page 47

    QH32DVR4C User ’ s Manual 47 S tep 6 : Alarm schedule setup: When a view tampering alarm occurs, the DVR will handle the alarm based on the schedule. Y ou c an set 4 p e r iods for each d ay o f the week. Y ou can a ls o copy the sche d ule of any one day to other days. Note: Tim e periods can not be r epea ted. Please reboot DV R t o make the pa ...

  • Q-See QH32DVR4C - page 48

    QH32DVR4C User ’ s Manual 48 Fig 5.16 V ideo signal l oss handle setup S tep 4: Setup a larm schedule: Y ou can setup a workin g schedule. The DVR will o nly respond when the vi deo loss occurs during the schedule. Note: The 4 time pe riods can no t be repeated. Please reboot the DVR t o make p aram eters ef fective. S tep 5: Se tup alarm policy: ...

  • Q-See QH32DVR4C - page 49

    QH32DVR4C User ’ s Manual 49 5.10 Mot ion Detecti on If you e na ble this function, when there is motion d etecte d by a camera, t he DVR will send an alarm. S tep 1: Enter in to “Ca m e ra” m enu: S tep 2: Select cam era: Use   key to select a camera after pressing edit key . S tep 3: Select motion detection sensiti vity: On the r ight ...

  • Q-See QH32DVR4C - page 50

    QH32DVR4C User ’ s Manual 50 The whole screen is divided into 22 *18 panels (NTSC: 22*15). There is one yellow panel on the upper left side. T he motion area setup steps are the same as that of mask area setup (re fer to Chapter 5.7) . The only d if ferences are that you c an use the PTZ key to set the w hole screen as motion sensiti ve, and mult ...

  • Q-See QH32DVR4C - page 51

    QH32DVR4C User ’ s Manual 51 Fig 5.18 Motion alarm handle setup S tep 6: Mo tion a larm record channel setup: When a moti o n alarm o ccurs, you can trigger related c amera to start to record. In “Moti o n Alarm Handle” m enu, yo u can select one or more recording channels. P lease use ENTE R o r EDIT key to chan ge the flag into “  ”e ...

  • Q-See QH32DVR4C - page 52

    QH32DVR4C User ’ s Manual 52 S tep 9: Save motion alarm setup: Press “Confirm” button t o return to “Image Setup” menu. In the “Image Set up” m enu, press “Confirm” button to save the current came ra parameters. S tep 10: Save all cameras: Y ou can repea t step 2 t o step 8 to s etup m otion detec tion parameters for other cam era ...

  • Q-See QH32DVR4C - page 53

    QH32DVR4C User ’ s Manual 53 S tep 2: Pre view p r o per ties: Pr eview m ode: For preview m ode item, you can use key to select one mode. If DVR has o nly 1 channel, you can select only “1 Screen” op ti on. If DVR has 4 channels, there are “1 Screen” and “4 Screen” options. If DVR has more than 4 but less t han 9 channel s, ther e ar ...

  • Q-See QH32DVR4C - page 54

    QH32DVR4C User ’ s Manual 54 5.12 Recordin g Setup In the main menu, there is an icon called “Recording”. Y ou can ente r into recording menu as follows: Fig 5.20 Recording ch annel configuration “Recording” m enu description: If HDD is Full: T her e are two options: “Overw r ite” and “S top recording”. If you select the “Overwr ...

  • Q-See QH32DVR4C - page 55

    QH32DVR4C User ’ s Manual 55 Bit Rate T ype: The DVR w ill use the fixed bit r ate to compress image. Th e bit r ate size is defined in “Bit Rate” option. W ith this option we can calculate the r eco rded file size and network bandwidth that we need. The maxim um bit rate selection is related t o resolut ion. If you select high r esolut ion, ...

  • Q-See QH32DVR4C - page 56

    QH32DVR4C User ’ s Manual 56 S tep 3: Record type For “Rec T ype”, the options are: All Time , M otion Detect, Alarm, Mo ti on|Alarm, and Motion&Alarm , command. For all day r ecord m ode, only one record ty pe ca n be selected. S tep 4: Copy to other days Y ou can r epea t step 2 and step 3 to setup for other days. Y o u can also copy th ...

  • Q-See QH32DVR4C - page 57

    QH32DVR4C User ’ s Manual 57 5.13 Extern al Alar m Input and R elay Out put For Q SC 26404 ther e are 4 alarm in and 1 relay out po rt s. In “Alarms” menu, yo u can setup each external alarm input. In main menu, move the “ Active Frame” to “Alarms” icon and pre ss ENTER key to enter into alarms m enu as shown in fig 5.22 5.22 Alarms s ...

  • Q-See QH32DVR4C - page 58

    QH32DVR4C User ’ s Manual 58 Fig 5.23 Alarm in hand ling s etup S tep 4: Alarm trigger r ecord channel setup Y ou can select channels to rec ord for ea ch alarm input. In the sub m enu, you can use ENTER or EDIT key to enable record chan nel. “ ” mea ns d isable d an d “  m eans enabled. Note: In order t o trigger t h e channel to r eco ...

  • Q-See QH32DVR4C - page 59

    QH32DVR4C User ’ s Manual 59 S tep 8: PTZ Linkage Move the “A ctive Frame ” to the “PTZ L inkage” button, press ENTER key to enter t he “PTZ Linkage” setup menu as shown in fig 5.24 Fig 5.24 PTZ linkage s etup First select a came ra, then select one of foll owing PTZ linkage options:  Preset: Se t the flag as “  ” t o ena b ...

  • Q-See QH32DVR4C - page 60

    QH32DVR4C User ’ s Manual 60 Alarm r e lay output setup S t ep 1: I n “Al arms” menu, use k eys t o select one alarm o utput. S tep 2: Select delay tim e The delay time is when the al ar m ends, the alarm o utput will co ntin ue o utput time. The d elay time options are: 5 Seconds, 10 Seconds, 30 Sec o nds, 1 Minute, 2 Minutes, 5 Minut es, 10 ...

  • Q-See QH32DVR4C - page 61

    QH32DVR4C User ’ s Manual 61 Exceptions The exceptions that can currentl y be handled inclu d e: hard disk full, h a rd disk error, illegal access, IP address confli ct, network failure, and N TSC / P AL d if ference. Enter into the “ Exceptions” menu as shown i n fig 5.26 Fig 5.26 Excepti ons setup Includes the f ollowing handle methods: Aud ...

  • Q-See QH32DVR4C - page 62

    QH32DVR4C User ’ s Manual 62 5.14 Netw ork Parameter s If you want t o access th e DVR over a network y ou m ust setup network parameters. Note: If any network p aram eter is modified, yo u must save and r e boo t the DVR to make it ef fective. In main menu, mo ve the “Active Frame” to the “Network” icon and p ress ENTER , you will enter ...

  • Q-See QH32DVR4C - page 63

    QH32DVR4C User ’ s Manual 63 Remote Ho st IP and Port: I f you set this IP and po rt, wh en there is an alarm and exception happens, the DVR will send information to that host IP . T he cente r with this IP can receive alarm and exception inf ormation from the DVR. Y ou can use SDK t o d evel op this center software. HttpPort: T he port i s for I ...

  • Q-See QH32DVR4C - page 64

    QH32DVR4C User ’ s Manual 64 PPPoE: DVR su pports PPPoE dail-up functio n. Exampl e: T o use PPPoE function S tep 1: Enter in to “Network” m enu. S tep 2: Select NIC type. S tep 3: Input port number . In the port edit bo x, use numeric keys to inpu t port number . The port number mus t b e m ore than 2000. S tep 4 : Input IP Server: Input one ...

  • Q-See QH32DVR4C - page 65

    QH32DVR4C User ’ s Manual 65 5.15 A cce ssing the DVR o ver a net work T o access the DVR t hrough a computer you need to ma ke sure the default gatewa y on the DVR is the same IP address a s your router , and the fir st three sets of numbers of the DVR IP address are the same as the first t hree sets of numb ers of r outer’s address. Ex ample: ...

  • Q-See QH32DVR4C - page 66

    QH32DVR4C User ’ s Manual 66 5.16 A cce ssing the DVR fr om a remot e computer T o access t he DVR fr om a remote computer , i n addition to the above steps, you will also need to forward ports 80 and 8000 o n the router t he DVR is attached t o, to t he IP address of t he DVR. How you would do this depends on the brand and model number of your r ...

  • Q-See QH32DVR4C - page 67

    QH32DVR4C User ’ s Manual 67 5.17 PT Z ( Pan, T ilt, Zoom) There is one RS-485 port on the DVR rear panel u se d for PTZ camera control. Y ou can setup RS-485 p aram eters to match your PT Z pro tocol. In main menu , move the “Active F ram e” to PT Z icon and press ENTER key , you will enter into PTZ m enu as shown in fig 5.29 Fig 5.29 PTZ p ...

  • Q-See QH32DVR4C - page 68

    QH32DVR4C User ’ s Manual 68 Note: In the DVR “PTZ” menu, if you select Pelco-P p rotocol when yo u setup PT Z address please p lus o r minus o ne compared with Camera ID. For exam p le, if camera ID is 2, the DVR PTZ address is set as ID 3. Pr eset setup: Preset is using one number t o represent the cam era ’ s position, zoom, focus an d i ...

  • Q-See QH32DVR4C - page 69

    QH32DVR4C User ’ s Manual 69 Add pr eset num b er: Y ou can input p r eset number (am ong 1-128) in the edit box. Then press the “Adjust” b utton to enter into PTZ control interface. In PT Z control interface, you can use direction key s to a dju st PTZ position, and use IRIS+ IRIS- FOCUS+ FOCUS- ZOOM+ ZOOM- keys to a dj ust ir is, foc us a n ...

  • Q-See QH32DVR4C - page 70

    QH32DVR4C User ’ s Manual 70 In the “Se qu ence” setup menu , first input the sequence number . The sequence is from 1 to 16. Each sequence is made up o f cruise points, and each cruise po int inclu d es a preset number , dwell time and dwell sp eed. Dwell ti m e is t he time staying at that preset nu m ber . Dwell sp eed is the speed that th ...

  • Q-See QH32DVR4C - page 71

    QH32DVR4C User ’ s Manual 71 Chapter 6: Utilit ies There are many tools in the “ Utilities” menu. Including “SavePara”, “Rest orePara”, “Upgrade”, “Hard Disk”, “St op Alarm Out”, “Reboot”, “Power Of f”, “ V iew Log” a nd “System Info”. Enter into “Utili ties” menu as shown in fig 6.1 Fig 6.1 Util ities ...

  • Q-See QH32DVR4C - page 72

    QH32DVR4C User ’ s Manual 72 6.2 Upgra de Y ou can use thi s function to upg rade the firmware. Press “Upgrade” icon, in the pop-up dialog box you can select either “FTP” or “USB” upgrade mode as sh o wn in fig 6.3 Fig 6.3 Upgrade If you select “ FTP” mode, you will enter int o “FTP Upgrade” menu: Fig 6.4 FTP IP setu p Input t ...

  • Q-See QH32DVR4C - page 73

    QH32DVR4C User ’ s Manual 73 6.3 Hard Dis k Manage ment fig 6.5 Hard Disk se tup Check HDD w ork status Capacity , Free space, Stan d by or not, Norma l status or not. Format HDD Before formatting stop all r ecording. After formatt ing, yo u must reboot the DVR, o therw ise DVR will not w ork correctly . 6.4 S top Alarm Out Clear the ala rm ou t ...

  • Q-See QH32DVR4C - page 74

    QH32DVR4C User ’ s Manual 74 6.7 V iew Log T o view th e log recorded on the DVR HD D . In the “Utilities” menu, press “V iew Log” to enter in to “Log” menu as shown i n fig 6.6 Fig 6.6 V iew log If you want t o view the log based on the default option, just press ENTER key . The D VR will list all matched inf ormation. Y ou can also ...

  • Q-See QH32DVR4C - page 75

    QH32DVR4C User ’ s Manual 75 For exception major typ e , the minor type includes: Vi d eo Signal Lo ss, I llegal Access, H ard Disk Error , Hard Disk Full, IP Conflict, DCD Lost. For example: The s t e ps of viewing alarm log . S tep 1: For “Query” item , select “By T ype” to active “Major T ype” and “ M inor T ype” items. S tep 2 ...

  • Q-See QH32DVR4C - page 76

    QH32DVR4C User ’ s Manual 76 S tep 3: Input start tim e and st op time . S tep 4 : Move the “Active Frame” to “Search Log” button and press ENTER key to start searching. S tep 5: After finishing searc h, the DVR will list the matched log information. S tep 6: Press “Return” b utto n to re turn to “Utilities” menu. 6.8 Syst em Info ...

  • Q-See QH32DVR4C - page 77

    QH32DVR4C User ’ s Manual 77 Chapter 7: Firmw ar e Upgrade The DV R firmware is stored in FLASH ROM. Y ou c an use the DVR upgrade fu nction to write the f irmware file (digicap) into FLASH. There are tw o cases where y ou need to upg r ade DV R firm ware. One is to u pdate old firmware, the o the r is wh en the code in DVR FLAS H has cr ashe d . ...

  • Q-See QH32DVR4C - page 78

    QH32DVR4C User ’ s Manual 78 Fig 7.2 setup p aram eters 3. Select “Users/rights” under the “Security” menu item. The following d ialog b ox w ill b e displayed. Fig 7.3 Setup user name 4. Create new user . Click “new user ’. N ew u ser di al og bo x is displayed. Input user nam e “tar get”. Click “OK”. Fig 7.4 usernam e 5. In ...

  • Q-See QH32DVR4C - page 79

    QH32DVR4C User ’ s Manual 79 Fig 7.9 Setup home director y 7. Next time, you do not need t o setu p again, just do ub le c lick a nd o pen “wftpd32.exe” to upgrade the DV R/DVS firmware. 7.2 Upgrad e Mode 1. Use client softw are to up gr ade the firmware file. Y ou d o not need t o u se ftp server software. Please re fer to the client softw a ...

  • Q-See QH32DVR4C - page 80

    QH32DVR4C User ’ s Manual 80 A p pendix A : Mouse Co ntrol Funct ion 1. In the preview interface Double-click the left key 1. Switc h to the m ost pictures wh en v iewing single picture. 2. Switc h to full screen mo de when view ing multi-pictures. B ack to previous mult i-pictures when y o u double cl ick again . Scroll wheel forward Swi tch to ...

  • Q-See QH32DVR4C - page 81

    QH32DVR4C User ’ s Manual 81 5. T est input inter face Click the lef t key 1. pop u p soft key board 2. Input text 3. Save and exi t Click the right key Cancel the text a nd exit the edition Scroll wheel forward Cursor goes t o the f ront character 6. Playlist interface Click the lef t key Select the fi le to copy or cancel Scroll wheel forward S ...

  • Q-See QH32DVR4C - page 82

    QH32DVR4C User ’ s Manual 82 Appendi x B: HDD Capaci ty Calcul ation T o calculate total ca pa city needed b y e ach DVR according t o vide o recording ( video recording type and video fil e stor a ge time). Ste p 1: U se Formula (1) to calculate storage capacity i q that is the capacity of each channel needed for every hour: unit Mbyte. 1024 360 ...

  • Q-See QH32DVR4C - page 83

    QH32DVR4C User ’ s Manual 83 Appendix C: DVR C onnect Cab le Definition 1 How to Make a RS-485 Con nect Cable Material and tool One twist cable (8 p ins), one standard RJ45 connecto r and one special tool f or R J45. RJ45 intr oduction Pin definiti on Make the connect cable acc ording the followi ng; to left p oint of RJ45 head, 1 st and 2 nd cab ...

  • Q-See QH32DVR4C - page 84

    QH32DVR4C User ’ s Manual 84 The correspon d ing rel ationship of the direct ca b le (2) Use the following method to ma ke the cross netw or k cable when DVR is directly connected with client-end PC. The corresponding r elationship of cross cable ...

  • Q-See QH32DVR4C - page 85

    QH32DVR4C User ’ s Manual 85 Appendi x D: DV R Specifi cations Model Name QSC26404 V ide o compression H.264 Preview resoluti on P AL: 352*288 (C I F), NTS C: 352*240 (CIF) Playback resol ution P AL: 352*288 (C I F), NTS C: 352*240 (CIF) V ide o input 4-ch BNC (Electrical Level: 1.0Vp-p, resistance: 75 Ω ) Composite video output 1-ch, BNC (Elec ...

  • Q-See QH32DVR4C - page 86

    QH32DVR4C User ’ s Manual 86 Appendi x D: Ca mera Spe cifications MODELS QOCDC60 QOCDC36 Image P ick-up Devices 1/4" CCD Picture Ele ment NTSC: 510(H)X 492(V) Sync Mode I n ternal Syn c Horizontal Resolution 420 TV Li nes Video Outpu t 1.0 V p-p, 75 ohm S/N Ratio >48 dB Gamma Characteristic 0.45 White Bal ance Auto Lens 2 wit h 6 mm / 2 w ...

  • Q-See QH32DVR4C - page 87

    QH32DVR4C User ’ s Manual 87 App endix E: T roublesh ooting Failure Possible r easons After p luggin g in power , turning on the p ower switch, “POWER” light in front Panel doe s not turn on, and fan does not work. 1) Power cable is d am aged. 2) Power supply is d am aged. After p luggin g in power , turning on the p ower switch, “POWER” ...

  • Q-See QH32DVR4C - page 88

    QH32DVR4C User ’ s Manual 88 Appendi x F: Product Service & W arranty Thank you for choosing our products. All o f our products u se rs have a conditi on al fr ee w arranty repair service for hardware wit hin 12 months starti ng from p ur chase date, and a free exchange service within one month (valid for manufacturing de fects ). Permanent u ...

  • Q-See QH32DVR4C - page 89

    QH32DVR4C User ’ s Manual 89 Appendix G Custom er Inform ation Card User ’ s Name Mr ./Mrs. Company Name Postal Address Postal code Phone Number E-mail Model Number of Product Serial N umb e r of Product Pur chase Date Distributor ...

  • Q-See QH32DVR4C - page 90

    QH32DVR4C User ’ s Manual 90 Notes: Contact Us: Q-See Products 8015 E. Cr ystal Dr Anaheim, CA 92807 We bsite: http://www .q-se e.com Customer Ser vice: Phone: 877-998 - 3440 x 538 Email: cs@dps i-usa.com T ech Suppor t: Phone: 877-998 - 3440 x 539 Email: ts@dpsi - usa .com F ax: 714-998-3509 ...

Manufacturer Q-See Category Cell Phone

Documents that we receive from a manufacturer of a Q-See QH32DVR4C can be divided into several groups. They are, among others:
- Q-See technical drawings
- QH32DVR4C manuals
- Q-See product data sheets
- information booklets
- or energy labels Q-See QH32DVR4C
All of them are important, but the most important information from the point of view of use of the device are in the user manual Q-See QH32DVR4C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Q-See QH32DVR4C, service manual, brief instructions and user manuals Q-See QH32DVR4C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Q-See QH32DVR4C.

Similar manuals

A complete manual for the device Q-See QH32DVR4C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Q-See QH32DVR4C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Q-See QH32DVR4C.

A complete Q-See manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Q-See QH32DVR4C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Q-See QH32DVR4C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Q-See QH32DVR4C, that we can find in the current document
3. Tips how to use the basic functions of the device Q-See QH32DVR4C - which should help us in our first steps of using Q-See QH32DVR4C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Q-See QH32DVR4C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Q-See QH32DVR4C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Q-See QH32DVR4C?

Use the form below

If you did not solve your problem by using a manual Q-See QH32DVR4C, ask a question using the form below. If a user had a similar problem with Q-See QH32DVR4C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)