Manual Hitachi SV 12SG

52 pages 1.3 mb
Download

Go to site of 52

Summary
  • Hitachi SV 12SG - page 1

    DOUBLE INSULATION DOUBLE ISOLATION AISLAMIENTO DOBLE INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI AVERTISSEMENT Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort ou de sérieuses blessures corporelles ! Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit. Prière de ...

  • Hitachi SV 12SG - page 2

    English Page IMPORTANT SAFETY INFORMATION ................ 3 MEANINGS OF SIGNAL WORDS ........................ 3 SAFETY ...................................................................... 4 GENERAL SAFETY RULES ................................... 4 SPECIFIC SAFETY RULES AND SYMBOLS ......... 6 DOUBLE INSULATION FOR SAFER OPERATION .............. ...

  • Hitachi SV 12SG - page 3

    English 3 IMPORTANT SAFETY INFORMATION Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before operating or maintaining this power tool. Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety rules or precautions. An accid ...

  • Hitachi SV 12SG - page 4

    English 4 SAFETY GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS 1. Work Area (1) Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. (2) Do not operat ...

  • Hitachi SV 12SG - page 5

    English 5 (4) Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury. (5) Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations. (6) Use safety e ...

  • Hitachi SV 12SG - page 6

    English 6 SPECIFIC SAFETY RULES AND SYMBOLS 1. Hold tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “ live ” wire will make exposed metal parts of the tool “ live ” and shock the operator. 2. ALWAYS wear ear protectors when using the tool for ...

  • Hitachi SV 12SG - page 7

    English 7 13. NEVER use a tool which is defective or operating abnormally. If the tool appears to be operating unusually, making strange noises, or otherwise appears defective, stop using it immediately and arrange for repairs by a Hitachi authorized service center. 14. NEVER leave tool running unattended. Turn power off. Don’t leave tool until i ...

  • Hitachi SV 12SG - page 8

    English 8 DOUBLE INSULATION FOR SAFER OPERATION To ensure safer operation of this power tool, HITACHI has adopted a double insulation design. “ Double insulation “ means that two physically separated insulation systems have been used to insulate the electrically conductive materials connected to the power supply from the outer frame handled by ...

  • Hitachi SV 12SG - page 9

    English 9 FUNCTIONAL DESCRIPTION NOTE: The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the power tool. NEVER operate, or attempt any maintenance on the tool unless you have first read and understood all safety instructions contained in this manual. Some illustrations in this In ...

  • Hitachi SV 12SG - page 10

    English 10 ASSEMBL Y AND OPERA TION APPLICATIONS 䡬 Finish polishing of woodwork surfaces. 䡬 Sanding surfaces of woodwork or sheet metal prior to painting, etc. PRIOR TO OPERATION 1. Power source Ensure that the power source to be utilized conforms to the power source requirements specified on the product nameplate. 2. Power switch Ensure that t ...

  • Hitachi SV 12SG - page 11

    English 11 6. Installing the sanding paper (1) Peel off the paper on the backside of the quick stick sanding paper. Since adhesive agent is applied on the paper on the backside of the quick stick sanding paper, make sure that it is not exposed to dust or other particles. Fig. 2. (2 ) To attach the quick stick sanding paper, match its holes to the h ...

  • Hitachi SV 12SG - page 12

    English 12 ORBITAL SANDER OPERATION WARNING: Never apply water or grinding fluid when sanding. This could result in electrical shock. 1. How to hold the orbital sander While gripping the housing, lightly press the sander against the surface to be sanded so that the sanding paper uniformly contacts the surface, as shown in Fig. 6. DO NOT apply exces ...

  • Hitachi SV 12SG - page 13

    English 13 HOW TO INSTALL THE OPTIONAL ACCESSORIES WARNING: Be sure to switch power OFF and disconnect the plug to avoid accidents. 1. Installing the s ponge pad (velcro type), the felt pad and the round rubber pad. Fig. 7 CAUTION: Replace only the pad and use the other parts just as they are. The sander will vibrate greatly if parts other than the ...

  • Hitachi SV 12SG - page 14

    English 14 2. Installing the sanding paper [4-1/2” × 5-1/2” (114 × 140 mm) sanding paper (Clip type)] (1) Bending the sanding paper: 䡬 Position the sander with its pad side facing upward as shown in Fig. 8. Place the sanding paper on the pad so that the center of the sanding paper is aligned with the center of the pad, and bend both ends of ...

  • Hitachi SV 12SG - page 15

    English 15 [4-3/8 ” × 4 ” (110 × 100 mm) sanding paper (Velcro type)] (1) Match the holes in the sanding paper (Velcro type) to the holes in the sponge pad (velcro type). Sanding paper (Velcro type) (2 ) Surely attach the sanding paper (Velcro type) by strongly and evenly pressing with your palm. (Fig. 12) Press strongly [5 ” (125 mm) quick ...

  • Hitachi SV 12SG - page 16

    English 16 MAINTENANCE AND INSPECTION WARNING: Be sure to switch power OFF and disconnect the plug from the receptacle during maintenance and inspection. 1. Emptying and cleaning the dust bag If the dust bag contains too much saw dust, dust collection will be affected. Empty the dust bag when it gets full. Remove the dust bag, open the fastener, an ...

  • Hitachi SV 12SG - page 17

    English 17 ACCESSORIES WARNING: ALWAYS use Only authorized HITACHI replacement parts and accessories. NEVER use replacement parts or accessories which are not intended for use with this tool. Contact HITACHI if you are not sure whether it is safe to use a particular replacement part or accessory with your tool. The use of any other attachment or ac ...

  • Hitachi SV 12SG - page 18

    18 Français INFORMATIONS IMPORTANTES DE SÉCURITÉ Lire et comprendre toutes les précautions de sécurité, les avertissements et les instructions de fonctionnement dans ce mode d’emploi avant d’utiliser ou d’entretenir cet outil motorisé. La plupart des accidents causés lors de l’utilisation ou de l’entretien de l’outil motorisé p ...

  • Hitachi SV 12SG - page 19

    19 Fran ç ais SECURITE REGLES GENERALE DE SECURITE AVERTISSEMENT: Lire et coxmprendre toutes les instructions. Un non respect de toutes les instructions ci-dessous peut entra î ner une é lectrocution, un incendie et/ou de s é rieuses blessures personnelles. CONSERVER CES INSTRUCTIONS 1. Zone de travail (1) Garder la zone de travail propre et bi ...

  • Hitachi SV 12SG - page 20

    20 Fran ç ais (2) S ’ habiller correctement. Ne pas porter des v ê tements larges ou des bijoux. Attacher les cheveux longs. Tenir ses cheveux, v ê tements et ses gants é loign é s des parties mobiles. Les v ê tements larges, les bijoux et les cheveux longs peuvent se prendre dans les parties mobiles. (3) Eviter tout d é marrage accidentel ...

  • Hitachi SV 12SG - page 21

    21 Fran ç ais (2) Lors de la r é paration d ’ un outil, utiliser uniquement des pi è ces de rechange identiques. Suivre les instructions de la section d ’ entretien de ce mode d ’ emploi. L ’ utilisation de pi è ces non autoris é es ou un non respect des instructions d ’ entretien peut cr é er un risque d ’é lectrocution ou de bl ...

  • Hitachi SV 12SG - page 22

    22 Fran ç ais 9. Ne pas utiliser les outils motoris é s si le rev ê tement de plastique ou la poign é e est fendu. Des fentes dans le rev ê tement ou la poign é e peuvent entra î ner une é lectrocution. De tels outils ne doivent pas ê tre utilis é s avant d ’ê tre r é par é . 10. Les lames et les accessoires doivent ê tre fermement ...

  • Hitachi SV 12SG - page 23

    23 Fran ç ais Cette ponceuse orbitale est une ponceuse à surface plane s è che portable qui a é t é con ç ue pour le pon ç age des surfaces en bois ou en m é tal et des couches de fond. 22. TOUJOURS installer la ponceuse orbitale solidement. 23. TOUJOURS porter un masque de protection lors de l ’ utilisation de la ponceuse orbitale dans u ...

  • Hitachi SV 12SG - page 24

    24 Français DESCRIPTION FONCTIONNELLE REMARQUE: Les informations contenues dans ce mode d’emploi sont conçues pour assister l’utilisateur dans une utilisation sans danger et un entretien de l’outil motorisé. NE JAMAIS utiliser ni entreprendre une révision de l’outil sans avoir d’abord lu et compris toutes les instructions de sécurit? ...

  • Hitachi SV 12SG - page 25

    25 Fran ç ais ASSEMBLAGE ET FONCTIONNEMENT APPLICATIONS 䡬 Polissage de finition des surfaces en bois. 䡬 Pon ç age des surfaces en bois ou en m é tal avant l'application de peinture, etc. AVANT L ’ UTILISATION 1. Source d ’ alimentation S ’ assurer que la source d ’ alimentation qui doit ê tre utilis é e est conforme à la sour ...

  • Hitachi SV 12SG - page 26

    26 Français B A 6. Fixation de la toile émeri (1) Décoller le papier au dos de la toile émeri à fixation rapide. Etant donné qu’il y a un agent adhésif au dos de la toile émeri à fixation rapide, bien veiller à ne pas l’exposer à la poussière ni à aucune autre particule. Fig. 2 (2) Pour fixer la toile émeri à fixation rapide, fai ...

  • Hitachi SV 12SG - page 27

    27 Français UTILISATION DE LA PONCEUSE ORBITALE AVERTISSEMENT : Ne jamais utiliser d’eau ou de fluide de ponçage au cours des opérations de ponçage. Cela peut entraîner un risque de commotion électrique. 1. Comment tenir la ponceuse orbitale Tenir l’enveloppe et presser légèrement la ponceuse sur la surface à poncer de manière à ce q ...

  • Hitachi SV 12SG - page 28

    28 Fran ç ais INSTALLATION DES ACCESSOIRES EN OPTION AVERTISSEMENT : Pour é viter tout accident, bien couper l ’ interrupteur d ’ alimentation (OFF) et d é brancher la fiche. 1. Installation du plateau en mousse (type Velcro), du plateau en feutre et du plateau en caoutchouc rond. Fig. 7 ATTENTION : Remplacer seulement le plateau et utiliser ...

  • Hitachi SV 12SG - page 29

    29 Français 2. Mise en place du papier de verre [Toile émeri de 4-1/2” × 5-1/2” (114 × 140 mm) (type agrafe)] (1) Pliage du papier de verre: 䡬 Placer la ponceuse avec le coussinet dirigé vers le haut, comme indiqué par la Fig. 8. Placer le papier de verre sur le coussinet en prenant soin de faire coïncider la ligne médiane du papier a ...

  • Hitachi SV 12SG - page 30

    30 Fran ç ais [Toile é meri de 4-3/8 ” × 4 ” (110 × 100 mm) (type Velcro)] (1) Faire correspondre les orifices de la toile é meri (type Velcro) avec ceux du plateau en mousse (type Velcro). Toile é meri (type Velcro) (2) Fixer solidement la toile é meri (type Velcro) en appuyant dessus fortement et de fa ç on uniforme avec la paume. (Fi ...

  • Hitachi SV 12SG - page 31

    31 Français ENTRETIEN ET INSPECTION AVERTISSEMENT: S’assurer de mettre l’interrupteur d’alimentation sur la position OFF et de déconnecter la fiche de la prise secteur avant l’entretien et l’inspection de la meuleuse. 1. Vidage et nettoyage du sac à poussière Si le sac à poussière contient trop de sciure de bois, la récupération d ...

  • Hitachi SV 12SG - page 32

    32 Fran ç ais ACCESSOIRES AVERTISSEMENT: TOUJOURS utiliser uniquement des pi è ces de rechange et des accessoires HITACHI. NE JAMAIS utiliser de pi è ce de rechange ou d ’ accessoires qui ne sont pas pr é vus pour ê tre utilis é avec cet outil. En cas de doute, contacter HITACHI pour savoir si une pi è ce de rechange ou un accessoire parti ...

  • Hitachi SV 12SG - page 33

    33 Fran ç ais 䡬 Plateau en feutre de 4-3/8 ” × 4 ” (110 mm × 100 mm) (N ° de code 310354) 䡬 Plateau en mousse (type Velcro) de 4-3/8 ” × 4 ” (110 mm × 100 mm) (N ° de code 310355) 䡬 Plateau rond en caoutchouc de 5 ” (125 mm) (N ° de code 310356) 䡬 Plaque perfor é e (N ° de code 310340) REMARQUE: Les sp é cifications son ...

  • Hitachi SV 12SG - page 34

    34 Español INFORMACIÓN IMPORTANTE SOBRE SEGURIDAD Antes de utilizar o de realizar cualquier trabajo de mantenimiento de esta herramienta eléctrica, lea y comprenda todas las precauciones de seguridad, advertencias e instrucciones de funcionamiento de este Manual de instrucciones. La mayoría de los accidentes producidos en la operación y el man ...

  • Hitachi SV 12SG - page 35

    35 Espa ñ ol SEGURIDAD NORMAS GENERALES DE SEGURIDAD ADVERTENCIA: Lea y entienda todas las instrucciones. Si no sigue las instrucciones indicadas a continuaci ó n, pueden producirse descargas el é ctricas, incendios, y/o lesiones serias. GUARDE ESTAS INSTRUCCIONES 1. Á rea de trabajo (1) Mantenga el á rea de trabajo limpia y bien iluminada. Lo ...

  • Hitachi SV 12SG - page 36

    36 Espa ñ ol (2) V í stase adecuadamente. No utilice ropa floja ni joyas. Si tiene pelo largo, rec ó jaselo. Mantenga su pelo, ropa, y guantes alejados de las partes m ó viles. La ropa floja, las joyas, o el pelo largo pueden engancharse en las partes m ó viles. (3) Evite la puesta en marcha accidental. Cerci ó rese de que la alimentaci ó n ...

  • Hitachi SV 12SG - page 37

    37 Espa ñ ol (2 ) Para el servicio de mantenimiento o reparaci ó n de una herramienta, utilice solamente piezas de repuesto id é nticas. Siga las instrucciones de la secci ó n de mantenimiento de este manual. La utilizaci ó n de piezas no autorizadas, o el no seguir las indicaciones del Manual de instrucciones puede crear el riesgo de descarga ...

  • Hitachi SV 12SG - page 38

    38 Español 9. No utilice herramientas eléctricas si la carcasa o la empuñadura de plástico está rajada. Las rajas en la carcasa o en la empuñadura de plástico pueden conducir a descargas eléctricas. Tales herramientas no deberán utilizarse mientras no se hayan reparado. 10. Las cuchillas y los accesorios deberán montarse con seguridad en ...

  • Hitachi SV 12SG - page 39

    39 Espa ñ ol 24. Definiciones para los s í mbolos utilizados en esta herramienta V ............ voltios Hz .......... hertzios A ............ amperios no .......... velocidad sin carga W ........... vatios ........... Construcci ó n de clase II ---/min ... revoluciones por minuto AISLAMIENTO DOBLE PARA OFRECER UNA OPERACI Ó N M Á S SEGURA Para ...

  • Hitachi SV 12SG - page 40

    40 Español DESCRIPCIÓN FUNCIONAL NOTA: La información contenida en este Manual de instrucciones ha sido diseñada para ayudarle a utilizar con seguridad y mantener esta herramienta eléctrica. NUNCA haga funcionar ni efectúe el mantenimiento de la herramienta antes de leer y comprender todas las instrucciones de seguridad contenidas en este man ...

  • Hitachi SV 12SG - page 41

    41 Espa ñ ol MONT AJE Y OPERACI Ó N APLICACIONES 䡬 Para pulir superficies de madera. 䡬 Para lijar superficies de madera o chapas de metal antes de pintarlas. ANTES DE LA OPERACI Ó N 1. Fuente de alimentaci ó n Cerci ó rese de que la fuente de alimentaci ó n que vaya a utilizar cumpla los requisitos indicados en la placa de caracter í sti ...

  • Hitachi SV 12SG - page 42

    42 Español B A 6. Fijación del papel de lija (1) Despegue el papel de la parte de atrás del papel de lija adhesivo. Como este papel de la parte de atrás contiene un producto adhesivo, procure no exponerlo al polvo o a otras partículas. Fig. 2. (2) Para colocar el papel de lija adhesivo, sitúelo de forma que sus orificios queden encima de los ...

  • Hitachi SV 12SG - page 43

    43 Espa ñ ol Fig. 6 UTILIZACI Ó N DE LA LIJADORA ORBITAL ADVERTENCIA : No aplicar runca agua ni fluido abrasivo cuando se est á lijando. Esto podr í a causar una descarga el é ctrica. 1. Modo de sujetar la lijadora orbital Mientras se agarra la lijadora, apretarla ligeramente contra la superficie a lijar de forma que el papel de lija toque uni ...

  • Hitachi SV 12SG - page 44

    44 Español MONTAJE DE LOS ACCESORIOS OPCIONALES ADVERTENCIA : Para evitar posibles accidentes, sitúe siempre el interruptor de encendido en OFF y desenchufe la lijadora. 1. Fijación de la almohadilla de esponja (tipo velcro), la almohadilla de fieltro y la almohadilla redonda de goma. 䡬 Afloje los cuatro tornillos M4 × 10 y extraiga la almoha ...

  • Hitachi SV 12SG - page 45

    45 Espa ñ ol 2. Instalaci ó n del papel de lija [Papel de lija (tipo velcro) de 4-1/2 ” × 5-1/2 ” (114 mm × 140 mm)] (1) Plegado del papel de lija: 䡬 Poner la lijadora con su almohadilla hacia arriba como se muestra en la Fig. 8. Poner el papel de lija sobre la almohadilla de forma que sus centros queden alineados y doblar ambos extremos ...

  • Hitachi SV 12SG - page 46

    46 Español [Papel de lija (tipo velcro) de 4-3/8” × 4” (110 mm × 100 mm)] (1) Haga coincidir los orificios del papel de lija (tipo velcro) con los orificios de la almohadilla de esponja (tipo velcro). Fig. 12 Fig. 11 Fig. 13 ( 2) Fije bien el papel de lija (tipo velcro) presionándolo con fuerza con la palma de la mano. (Fig. 12) [Papel de l ...

  • Hitachi SV 12SG - page 47

    47 Espa ñ ol MANTENIMIENTO E INSPECCI Ó N ADVERTENCIA: Antes de realizar el mantenimiento o la inspecci ó n de la amoladora, cerci ó rese de DESCONECTAR la alimentaci ó n y de desenchufar el cable de alimentaci ó n del tomacorriente. 1. Vaciar y limpiar el celector de polvo Si la bolsa para el serr í n contiene demasiado serr í n la recolec ...

  • Hitachi SV 12SG - page 48

    48 Español ACCESORIOS ADVERTENCIA: SIEMPRE utilice únicamente repuestos y accesorios autorizados por HITACHI. NO utilice NUNCA repuestos o accesorios no previstos para usar con esta herramienta. Si tiene dudas en cuanto a la seguridad de usar determinado repuesto o accesorio junto con su herramienta, póngase en contacto con HITACHI. La utilizaci ...

  • Hitachi SV 12SG - page 49

    49 Español 䡬 Almohadilla de fieltro de 4-3/8” × 4” (110 mm × 100 mm) (N.º de código 310354) 䡬 Almohadilla de esponja (tipo velcro) de 4-3/8” × 4” (110 mm × 100 mm) (N.º de código 310355) 䡬 Almohadilla redonda de goma de 5” (125 mm) (N.º de código 310356) 䡬 Placa perforadora (N.º de código 310340) NOTA: Las especificac ...

  • Hitachi SV 12SG - page 50

    50 ...

  • Hitachi SV 12SG - page 51

    51 A B C D 1 ––––––– 1 2 301-653 4 D4 × 20 3 322-766 1 5 322-764 1 6 322-761 1 7 984-750 2 D4 × 16 8 937-631 1 9 ––––––– 1 10 953-327 1 D8.8 11 ––––––– 1 12 930-483 2 13 999-041 2 14 322-756 2 15 311-945 2 D4 × 10 16 322-759 1 17 311-978 1 18 949-216 4 M4 × 10 19 938-307 1 20 311-948 1 21 626-VVM 1 626V ...

  • Hitachi SV 12SG - page 52

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known [to the State of California] to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: ● Lead from lead-based paints, ● Crystalline silica from bricks and cement and other mas ...

Manufacturer Hitachi Category Sander

Documents that we receive from a manufacturer of a Hitachi SV 12SG can be divided into several groups. They are, among others:
- Hitachi technical drawings
- SV 12SG manuals
- Hitachi product data sheets
- information booklets
- or energy labels Hitachi SV 12SG
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hitachi SV 12SG.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hitachi SV 12SG, service manual, brief instructions and user manuals Hitachi SV 12SG. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hitachi SV 12SG.

Similar manuals

A complete manual for the device Hitachi SV 12SG, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hitachi SV 12SG by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hitachi SV 12SG.

A complete Hitachi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hitachi SV 12SG - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hitachi SV 12SG, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hitachi SV 12SG, that we can find in the current document
3. Tips how to use the basic functions of the device Hitachi SV 12SG - which should help us in our first steps of using Hitachi SV 12SG
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hitachi SV 12SG
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hitachi SV 12SG in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hitachi SV 12SG?

Use the form below

If you did not solve your problem by using a manual Hitachi SV 12SG, ask a question using the form below. If a user had a similar problem with Hitachi SV 12SG it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)