Manual Q-Logic APS-30

6 pages 0.11 mb
Download

Go to site of 6

Summary
  • Q-Logic APS-30 - page 1

    KEYLESS ENTR Y ALARM UPGRADE MODULE INST ALLA TION INSTRUCTIONS PRE - INSTALLATION NOTES : STAND ALONE PASSIVE ALARM When installing the APS-30 as a stand alone passive alarm system, the dip switches must be set as follows; Dip Switc h#1=O N Dip Switc h#2=O N Dip Switc h#3=O F F Dip Switc h#4=O F F Dip Switc h#5=O F F Dip Switc h#6=O F F PASSIVE / ...

  • Q-Logic APS-30 - page 2

    This alarm can be programmed to drive an electronic siren, or pulse the vehicle's horn. In the siren mode, the audible output will deliver a switched + 12 VDC output when the system is triggered. This allows for direct connection to an optional electronic siren. In the horn mode, the audible output ( WHITE w/ BLACK tracer wire ) will deliver a ...

  • Q-Logic APS-30 - page 3

    SCENARIO A SCENARIO B SCENARIO C SCENARIO D RESULT APS-30 DISARMS NO CHANGE IN ALARM STATUS APS-30 DISARMS NO CHANGE IN ALARM STATUS DISARM #2 RED / BLACK WIRE NEGATIVE POSITIVE POSITIVE NEGATIVE DISARM #1 RED WIRE POSITIVE POSITIVE NEGATIVE NEGATIVE VALET AND EMERGENCY OVERRIDE SWITCHES This system provides individual inputs for two switches, a va ...

  • Q-Logic APS-30 - page 4

    Two pin switches are included for use in protecting the hood and trunk ( or hatchback ) of the vehicle. The switches must always be mounted to a grounded, metal surface of the vehicle. It is important to select a location where water cannot flow or collect, and to avoid all drip gutters on hood and trunk fender walls. Choose locations that are prot ...

  • Q-Logic APS-30 - page 5

    Connect this wire to the DARK BLUE wire from the push-button manual override switch. Connect the BLACK wire from the switch to chassis ground. BLACK WIRE : CHASSIS GROUND Connect this wire to a solid, metal part of the vehicle’s chassis. ORANGE WIRE : 300 mA GROUND OUTPUT WHEN ARMED This wire is provided to control the starter cut relay. Connect ...

  • Q-Logic APS-30 - page 6

    Printed in Taiwan Audiovox Corp., 150 Marcus Blvd. Hauppauge, N.Y. 11788 Form No. 128-4515         + FACTORY REMOTE KEYLESS ENTRY MODULE    +      TYPICAL 2-STEP DIAGRAM TYPICAL ONE-STEP DIAGRAM           +     FACTORY REMOTE KEYLESS ENTRY MODULE ALL UNLOCK OU ...

Manufacturer Q-Logic Category Automobile Electronics

Documents that we receive from a manufacturer of a Q-Logic APS-30 can be divided into several groups. They are, among others:
- Q-Logic technical drawings
- APS-30 manuals
- Q-Logic product data sheets
- information booklets
- or energy labels Q-Logic APS-30
All of them are important, but the most important information from the point of view of use of the device are in the user manual Q-Logic APS-30.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Q-Logic APS-30, service manual, brief instructions and user manuals Q-Logic APS-30. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Q-Logic APS-30.

Similar manuals

A complete manual for the device Q-Logic APS-30, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Q-Logic APS-30 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Q-Logic APS-30.

A complete Q-Logic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Q-Logic APS-30 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Q-Logic APS-30, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Q-Logic APS-30, that we can find in the current document
3. Tips how to use the basic functions of the device Q-Logic APS-30 - which should help us in our first steps of using Q-Logic APS-30
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Q-Logic APS-30
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Q-Logic APS-30 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Q-Logic APS-30?

Use the form below

If you did not solve your problem by using a manual Q-Logic APS-30, ask a question using the form below. If a user had a similar problem with Q-Logic APS-30 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (1)

Serge

The letters are difficult to read as it prints in a blury way