-
D-Link DWL-120+ - page 1
Manual Building Networks for People Air Plus DWL-120+ D-Link 2.4GHz Wireless USB Adapter ...
-
D-Link DWL-120+ - page 2
2 Contents Package Contents ................................................................................ 3 Introduction ............................................................................................ 4 Wireless Basics .................................................................................... 6 Getting S tarted ........... ...
-
D-Link DWL-120+ - page 3
3 Contents of Package: D-Link Air Plus DWL-120+ 2.4 GHz Wireless USB Adapter Manual on CD-ROM Quick Installation Guide Package Contents If any of the above items are missing, please contact your reseller . System Requirements: ! ! ! Windows XP/2000/Me/98SE ! A computer or laptop with an available USB port ! At least 32 MB of memory and a 300 MHz pr ...
-
D-Link DWL-120+ - page 4
4 Introduction The D-Link Air Plus DWL-120+ 2.4GHz Wireless USB Adapter is a convenient Plug & Play USB 1.1 solution that brings wireless networking to your laptop or desktop PC. It provides up to 256-bit level of WEP security to your wireless data transfers. After completing the step s outlined in the Quick Installation Guide (included in your ...
-
D-Link DWL-120+ - page 5
5 Features and Benefits Convenience of Plug & Play installation ! ** * Environmental factors may adversely affect range Three year warranty (USA only) ! Connects at up to 328 feet indoors* ! User-friendly configuration and diagnostic utilities ! Supports infrastructure networks via an Access Point or Router and Peer-to-Peer communication in Ad- ...
-
D-Link DWL-120+ - page 6
6 D-Link wireless products are based on industry standards to provide easy-to- use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. D-Link wireless products will allow you access to the data you want, when and where you want it. Y ou will be able to enjoy the freedom that wireless networ ...
-
D-Link DWL-120+ - page 7
7 Wireless Basics (continued) People use wireless LAN technology for many different purposes: Mobility - Productivity increases when people have access to data in any location within the operating range of the WLAN. Management decisions based on real-time information can significantly improve worker efficiency . Low Implementation Costs – WLANs a ...
-
D-Link DWL-120+ - page 8
8 Wireless Basics (continued) Installation Considerations The D-Link Air Plus DWL-120+ lets you access your network, using a wireless connection, from virtually anywhere within its operating range. Keep in mind, however , that the number , thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may l ...
-
D-Link DWL-120+ - page 9
9 Getting Started With its default settings, the DWL-120+ will connect with other D-Link Air Plus products, right out of the box. A wireless broadband Router- D-Link Air Plus DI-614+ A laptop computer with a USB wireless network adapter - D-Link Air Plus DWL-120+ A desktop computer with a USB wireless network adapter - D-Link AirPlus DWL-120+ A Cab ...
-
D-Link DWL-120+ - page 10
10 Y ou will need broadband Internet access (a Cable or DSL-subscriber line into your home or office) Consult with your Cable or DSL provider for proper installation of the modem Connect the Cable or DSL modem to your broadband router ( see the Quick Installation Guide included with your router . ) Install the D-Link Air Plus DWL-120 wireless USB a ...
-
D-Link DWL-120+ - page 11
11 Getting Started Setting up a Wireless Ad Hoc Network When assigning IP Addresses to the computers on the network, please remember that the IP Address for each computer must be in the same IP Address range as all the computers in the network , and the subnet mask must be exactly the same for all the computers in the network. For example: If the f ...
-
D-Link DWL-120+ - page 12
12 Using the Configuration Utility D-Link Air Plus DWL-120+ uses the Configuration Utility as the management software. The utility provides the user an easy interface to change any settings related to the wireless adapter . When the computer is started, the Configuration Utility starts automatically and the system tray icon is loaded in the toolbar ...
-
D-Link DWL-120+ - page 13
13 Configuration Using the Configuration Utility Wireless Mode: Infrastructure is the factory default setting. Ad-Hoc mode is used for peer- to-peer networking. See the Getting Started section in this manual for ex- amples of these network types. SSID: The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting ...
-
D-Link DWL-120+ - page 14
14 Using the Configuration Utility Encryption Data Encryption: Enable encryption by clicking in the box. Data encryption is de-selected as the default setting. Default Key: Enter a key in either ASCII (e.g., a word) or hexadecimal format. Select one of the 4 keys that you have created to be the default key . Authorization Mode: Click Apply if you h ...
-
D-Link DWL-120+ - page 15
15 Using the Configuration Utility Site Survey A vailable Networks: The top section of the window displays the A vailable Networks . Scroll up and down the list and highlight the network to which you wish to connect. Click on the Connect button. Profiles: In the lower half of the screen, you can manage the profiles that you have created for the wir ...
-
D-Link DWL-120+ - page 16
16 Using the Configuration Utility (continued) In this window you can configure all the properties of a profile in order to connect with a network of your choice. Click OK to save the changes. Properties Current Setting Current Setting/Default Setting default ...
-
D-Link DWL-120+ - page 17
17 Using the Configuration Utility About The About tab displays the utility and the firmware versions. ...
-
D-Link DWL-120+ - page 18
18 Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsof t Windows XP . Note: Please refer to websites such as http://www .homenethelp.com and http://www .microsof t.com/windows2000 for information about networking computers using Windows 2000, ME or 98SE. Go to Start& ...
-
D-Link DWL-120+ - page 19
19 Please follow all the instructions in this window: Networking Basics Click Next In the following window , select the best description of your computer . If your computer connects to the internet through a gateway/router , select the second option as shown. Click Next ...
-
D-Link DWL-120+ - page 20
20 Enter a Computer description and a Computer name (optional.) Networking Basics Click Next Enter a Workgroup name. All computers on your network should have the same W orkgroup name. Click Next ...
-
D-Link DWL-120+ - page 21
21 Please wait while the Network Setup Wizard applies the changes. Networking Basics When the changes are complete, click Next . Please wait while the Network Setup Wizard configures the computer . This may take a few minutes. ...
-
D-Link DWL-120+ - page 22
22 Networking Basics In the window below , select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. Y ou will run this disk on each of the computers on your network. Click Next . Insert a disk into the Floppy Disk Drive, in this case drive A. ...
-
D-Link DWL-120+ - page 23
23 Networking Basics Please read the information under Here’ s how in the screen below . After you com- plete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. T o continue click Next. ...
-
D-Link DWL-120+ - page 24
24 Networking Basics Please read the information on this screen, then click Finish to complete the Network Setup Wizard . The new settings will take ef fect when you restart the computer . Click Ye s to restart the computer . Y ou have completed configuring this computer . Next, you will need to run the Network Setup Disk on all the other computers ...
-
D-Link DWL-120+ - page 25
25 ! Networking Basics Naming your Computer T o name your computer , please follow these directions:In Windows XP : Click Start (in the lower left corner of the screen) Right-click on My Computer Select Properties and click ! ! ! ! ! Select the Computer Name T ab in the System Properties window . Y ou may enter a Com- puter Description if you wish; ...
-
D-Link DWL-120+ - page 26
26 Networking Basics Naming your Computer ! In this window , enter the Computer name Select Workgroup and enter the name of the Workgroup All computers on your network must have the same Workgroup name. Click OK ! ! ! Checking the IP Address in W indows XP The wireless adapter-equipped computers in your network must be in the same IP Address range ...
-
D-Link DWL-120+ - page 27
27 Networking Basics Checking the IP Address in W indows XP This window will appear . Click the Support tab Click Close ! ! Assigning a Static IP Address in W indows XP/2000 Note: Residential Gateways/Broadband Routers will automatically assign IP Ad- dresses to the computers on the network, using DHCP (Dynamic Host Configura- tion Protocol) techno ...
-
D-Link DWL-120+ - page 28
28 Networking Basics Assigning a Static IP Address in W indows XP/2000 ! Double-click on Network Connections ! ! Double-click on Properties Right-click on Local Area Connections ...
-
D-Link DWL-120+ - page 29
29 Networking Basics Assigning a Static IP Address in W indows XP/2000 Input your IP address and subnet mask. (The IP Addresses on your network must be within the same range. For example, if one computer has an IP Address of 192.168.0.2, the other computers should have IP Addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet m ...
-
D-Link DWL-120+ - page 30
30 Networking Basics Checking the Wireless Connection by Pinging in Windows XP and 2000* Checking the Wireless Connection by Pinging in Windows Me and 98* Go to Start > Run > type cmd . A window similar to this one will appear . T ype ping xxx.xxx.xxx.xxx , where xxx is the IP Address of the Wireless Router or Access Point. A good wireless co ...
-
D-Link DWL-120+ - page 31
31 1. Check that the drivers for the DWL-120+ are inst alled properly . Click Device Manager ! Select the Hardware Ta b ! T roubleshooting Go to Start > My Computer > Properties ! This chapter provides solutions to problems that can occur during the installation and operation of the DWL-120+. Read the following descriptions if you are having ...
-
D-Link DWL-120+ - page 32
32 T roubleshooting ! ! ! ! ! Double-click on Network Adapters Right-click on D-Link Air Plus DWL-120+ Wireless USB Adapter Select Properties to check that the drivers are installed properly Look under Device Status to check that the device is working properly Click OK ...
-
D-Link DWL-120+ - page 33
33 T roubleshooting 2. What variables may cause my wireless products to lose reception? D-Link products let you access your network from virtually anywhere you want. However , the positioning of the products within your environment will affect the wireless range. Please refer to Installation Considerations in the Wireless Basics section of this man ...
-
D-Link DWL-120+ - page 34
34 T echnical S pecifications T emperature Operating: 0ºC to 55ºC (32ºF to 131ºF) Storing: -20ºC to 75ºC (-4ºF to 167ºF) ! ! IEEE 802.1 1b ! Standard Power Link Status Diagnostic LED ! ! 95%, non-condensing Humidity: ! Antenna T ype: Single External, Dual Diversity ! DSSS Modulation T echnique: ! L = 3 inches W = 2 inches H = 0.5 inches Phy ...
-
D-Link DWL-120+ - page 35
35 T echnical Support Y ou can find software updates and user document ation on the D-Link website. D-Link provides free technical support for customers within the United S tates and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link T echnical Support through our website, or by pho ...
-
D-Link DWL-120+ - page 36
36 Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: • D-Link or its authorized reseller or distributor and • Products purchased and delivered within the fif ty states of the United S ta ...
-
D-Link DWL-120+ - page 37
37 • The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same. • The original product owner must obtain a Return Material Authorization (“RMA”) number from the Authorized D-Link Service Office and, if reques ...
-
D-Link DWL-120+ - page 38
38 FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORT ANT NOTE: FCC Radiation Exposure Statement: This eq ...
Do you have a question concerning D-Link DWL-120+?
Use the form below
If you did not solve your problem by using a manual D-Link DWL-120+, ask a question using the form below. If a user had a similar problem with D-Link DWL-120+ it is likely that he will want to share the way to solve it.