Manual TP-Link MC200CM

16 pages 2.05 mb
Download

Go to site of 16

Summary
  • TP-Link MC200CM - page 1

    User Guide MC200CM MC210CS MC220L Gigabit Ethernet Media Converter ...

  • TP-Link MC200CM - page 2

    COPYRIGHT & TRADEMARKS S pecifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are tradem arks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative ...

  • TP-Link MC200CM - page 3

    i CONTENTS Package Contents........................................................................... 1 1. Introduction ............................................................................. 1 2. Features................................................................................... 2 3. Appearance Indication ........................... ...

  • TP-Link MC200CM - page 4

    1 Package Content s Before starting using the products, make sure what you have is what you ordered. The Converter includes: ¾ One Converter ¾ One AC-DC Power Adapter (DC9V/600mA) ¾ One Us er Guide 1. Introduction MC200CM, MC210CS and MC220L are Gigabit Ethernet Media Converters. The FX port of MC220L support s hot-swappable. The converter media ...

  • TP-Link MC200CM - page 5

    2 Rear Panel Front Panel MC220L Note: This media convertor can also be powered by 5VDC Adapter . 2. Features ¾ Comply with IEEE 802.3ab and IEEE 802.3z. ¾ Provide one SC/LC fiber co nnector and one RJ45 connector . Please check the table in p age 3 for the accurate c onnector of each model. ¾ Work at 1000Mbps in Full-Duple x mode for both TX por ...

  • TP-Link MC200CM - page 6

    3 ¾ FX port supports hot-swappable(only for MC220L). Connectors and Netw ork Cables Supported The connectors and network cables supported by the converter are listed as follows. ¾ Connectors: RJ-45, SC, LC. ¾ Network Cables : Cat.5 T wisted-Pair(below abbreviated as TP), 9/125um Single-mode fiber , 62.5/ 125,50/125um Multi-mode fiber . Model No. ...

  • TP-Link MC200CM - page 7

    4 When you take a look at these indicators, you will know what’s happening on your network. Name Status Indication On Power on PWR Off Power of f On There’s a valid link for FX Port. FX LINK Off There’s no valid link for FX Port. On There’s a valid link for TP Port. LINK Off There’s no valid link for TP Port. On The converter is receiving ...

  • TP-Link MC200CM - page 8

    5 ¾ AUTO : The FX port operates in Auto-Negotiation mode. Note: Be sure the opposite end is using the same setting. When using t wo converters at the same time, the two converte rs must be set to FORCE mode . When connected to other products, such as TL- SL2210WEB or TL-SL2428WEB, the converter must be set to Auto- Negotiation mode . We suggest le ...

  • TP-Link MC200CM - page 9

    6 Note: Either two MC200CM or two MC210CS could cooperate. MC220L can be plugged in with two kinds of SFP modu les, single-mode or multi-mode. Plug the SFP module into MC220L T ransmits and receives data between two MC220L Note: T wo MC220 L with the same SFP module could cooperate. ...

  • TP-Link MC200CM - page 10

    7 T ransmits and receives data between MC220L and MC200CM/MC210CS Note: MC220L could be connected to MC200CM or M C210CS, however , the SFP module in MC220L must use the same mode and the same wavelength as the opposite end. (Pleas e refer to the table below) And the connection fiber must be LC-SC fiber . Model No. MC220L connect with MC200CM MC210 ...

  • TP-Link MC200CM - page 11

    8 Note: For the correct connection between 2 Media Converters, please refer to connection diagram in 4.1 ---- two MC200CM, two MC210CS, two MC220L or one MC220L with another MC200CM/MC210CS. 2. Another effective application is to place one converter directly between a 1000Base-TX network and a fiber optic (FX) device. 4.3 Inst allation Pro cedure U ...

  • TP-Link MC200CM - page 12

    9 2. Connection of two Converters or a Converter and a 1000Base- FX Device: Use a SC fiber cable to connect the t wo Converters’ SC connectors or the SC connec ters of a Converter and a 1000Base-FX Device. 3. T urn on the power. 4.4 Inst all Media Co nverter into MC1400 T weak out the two screws located on either side of the Chassis’s one side, ...

  • TP-Link MC200CM - page 13

    10 POWER LED lit on. Then you can operate it as the boxlike Media Converter of the MC series. 5. T roubleshooting If you encounter some problems when you install or use this product, please try to solve the problem according to the following steps. If it still doesn’t work, please contact your dealer or ask for help from our technical support. 1. ...

  • TP-Link MC200CM - page 14

    11 6. Appendix: S pecifications MC200CM S tandards and Protocols IEEE802.3ab, IEEE 802.3z, IEEE 802.3 x Media Interface SC, RJ45 Cat.5: 100m Max. Distance Multi-mode Fiber: 0.55km Power External Power Adapter Operation: 0 ℃ ~40 ℃ T emperature S torage: -40 ℃ ~70 ℃ Operation: 10%~90% non-condensing Humidity S torage: 5%~90% non-condensing MC ...

  • TP-Link MC200CM - page 15

    12 MC220L S tandards and Protocols IEEE802.3ab, IEEE 802.3z, IEEE 802.3 x Media Interface LC, RJ45 Cat.5: 100m Max. Distance Multi/Single-mode Fiber: 0.55km/10km Power External Power Adapter Operation: 0 ℃ ~40 ℃ T emperature S torage: -40 ℃ ~70 ℃ Operation: 10%~90% non-condensing Humidity S torage: 5%~90% non-condensing ...

  • TP-Link MC200CM - page 16

    7106503685 ...

Manufacturer TP-Link Category Digital Camera

Documents that we receive from a manufacturer of a TP-Link MC200CM can be divided into several groups. They are, among others:
- TP-Link technical drawings
- MC200CM manuals
- TP-Link product data sheets
- information booklets
- or energy labels TP-Link MC200CM
All of them are important, but the most important information from the point of view of use of the device are in the user manual TP-Link MC200CM.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals TP-Link MC200CM, service manual, brief instructions and user manuals TP-Link MC200CM. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product TP-Link MC200CM.

Similar manuals

A complete manual for the device TP-Link MC200CM, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use TP-Link MC200CM by users. Manuals are usually written by a technical writer, but in a language understandable to all users of TP-Link MC200CM.

A complete TP-Link manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual TP-Link MC200CM - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the TP-Link MC200CM, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the TP-Link MC200CM, that we can find in the current document
3. Tips how to use the basic functions of the device TP-Link MC200CM - which should help us in our first steps of using TP-Link MC200CM
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with TP-Link MC200CM
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of TP-Link MC200CM in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning TP-Link MC200CM?

Use the form below

If you did not solve your problem by using a manual TP-Link MC200CM, ask a question using the form below. If a user had a similar problem with TP-Link MC200CM it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (1)

Jesus

Buenos dias!!! He adquirido hace pocos dias un convertidor de medios TP-Link MC200CM y me surge un problema. Si conecto a él un PC directamente con cable de cobre cat. 6, funciona perfectamente pero si en vez de conectar un pc lo conecto a un switch no detecta conexión ni se encienden los led´s de conexión ni en el switch ni en el TP-Link MC200CM y por tanto no tengo conexión a inernet. Quede claro q las fibras están bien conectadas al TP-Link MC200CM. Muchas gracias por su atención. Saludos!!