Manual Omega Speaker Systems FPU5-MT-220

83 pages 1.57 mb
Download

Go to site of 83

Summary
  • Omega Speaker Systems FPU5-MT-220 - page 1

    www .omega.com e-mail: info@omega.com U ser ’ s Guide FPU 5 -M T - 1 10 , F P U 5 - M T - 2 2 0 OM EG AFL E X ® Per i s t a l t ic P u m p M o t o r Shop online at MADE IN ...

  • Omega Speaker Systems FPU5-MT-220 - page 2

    Servicing Nor th America: USA: One Omega Drive, P.O. Box 4047 ISO 9001 Certified Stamford CT 06907-0047 TEL: (203) 359-1660 FAX: (203) 359-7700 e-mail: info@omega.com Canada: 976 Bergar Laval (Quebec) H7L 5A1 TEL: (514) 856-6928 FAX: (514) 856-6886 e-mail: info@omega.ca For immediate technical or application assistance: USA and Canada: Sales Servic ...

  • Omega Speaker Systems FPU5-MT-220 - page 3

    Remove the Packing List and verify that you have received all equipment, including the following (quantities in parentheses): FPU5-MT -1 10 or FPU5-MT -220 Peristaltic Pump Motor (1) Power Cord (1) Spare Fuse (1) Peristaltic Pump Quick Start Manual (Manual Number MQS2219) (1) Peristaltic Pump Motor Quick Start Manual (Manual Number MQS2299) (1) Ope ...

  • Omega Speaker Systems FPU5-MT-220 - page 4

    Page Unpacking Instructions ............................................................................ i Chapter 1 Introduction ....................................................................... 1-1 1.1 Description .................................................................................... 1-1 1.2 Features .......................... ...

  • Omega Speaker Systems FPU5-MT-220 - page 5

    Peristaltic Pump Motor iii TABLE OF CONTENTS Page 6.6 Other Pumping Options ........................................................... 6-21 6.6.1 Auxiliary Out (Remote Monitor) .............................................. 6-21 6.6.2 Auxiliary In (Remote Start/Stop) ............................................. 6-22 Chapter 7 T roubleshooting Gui ...

  • Omega Speaker Systems FPU5-MT-220 - page 6

    Peristaltic Pump Motor iv TABLE OF CONTENTS Notes ...

  • Omega Speaker Systems FPU5-MT-220 - page 7

    Index I I A Accessories ............................................ 10-1 Auxiliary In ........................................... 6-22 Auxiliary Out ....................................... 6-21 C Calibrating the Tubing .......................... 5-6 Calibration Accuracy ............................. 9-1 Creeping, Preventing ....................... ...

  • Omega Speaker Systems FPU5-MT-220 - page 8

    Index I II Notes ...

  • Omega Speaker Systems FPU5-MT-220 - page 9

    Index I III ...

  • Omega Speaker Systems FPU5-MT-220 - page 10

    Intr oduction 1-1 1 1.1 Description The peristaltic pump motor offers micr oprocessor control and a digital display , and is designed to be fully compatible with our peristaltic pump. No mounting plate is needed, just two mounting screws. A 1 ⁄ 10 HP (75W) motor provides flow rates of up to 2280 mL/minute. A convenient membrane keypad lets you en ...

  • Omega Speaker Systems FPU5-MT-220 - page 11

    Introduction 1 1-2 Notes ...

  • Omega Speaker Systems FPU5-MT-220 - page 12

    Par ts of the Pump Motor 2-1 2 2.1 Front View Figure 2-1. Front View of the Pump Motor T able 2-1. Front View Item Description Function 1 ON/OFF Switch Toggles the unit’s power on and off 2D isplay Displays the pump messages; provides information while the pump is running 3M embrane Keypad Allows you to select pump functions 4 Rubber Feet Support ...

  • Omega Speaker Systems FPU5-MT-220 - page 13

    Parts of the Pump Motor 2 2-2 2.2 Left Side V iew Figure 2-2. Left Side View of the Pump Motor T able 2-2. Left Side View Item Description Function 1 ON/OFF Switch Toggles the pump motor’s power on and off 5M ounting Holes Provides attachment sites for pump(s) 6 Top Alignment Pin Aligns the pump head during installation 7 Bottom Alignment Pin Ali ...

  • Omega Speaker Systems FPU5-MT-220 - page 14

    2.3 Right Side V iew Figure 2-3. Right Side View of the Pump Motor T able 2-3. Right Side View Item Description Function 1 ON/OFF Switch Toggles the pump motor’s power on and off 5 Safety Cover Screws Secure safety cover to the motor - if safety cover is not in place, the exposed holes are the Mounting Holes 6 Top Alignment Pin Aligns the pump he ...

  • Omega Speaker Systems FPU5-MT-220 - page 15

    2.4 Membrane Keypad and Display Figure 2-4. Membrane Keypad and Display T able 2-4. Membrane Keypad Detail Item Description Function 2D isplay Shows pump messages; provides quantitative information while the pump is running 14 Left Pump Icon Side view of a pump(s); associated with two green LEDs 15 Green LEDs for left pump Indicate left-mounted pum ...

  • Omega Speaker Systems FPU5-MT-220 - page 16

    T able 2-4. Membrane Keypad Details (cont’d) Item Description Function 21 FLOW RATE key Initiates the FLOW RATE Mode of pumping and displays the FLOW RATE setting of the pump motor; displays the actual fluid flow rate, as it occurs in time 22 TUBE ID key Selects the inner diameter of a tube 23 TIME key Initiates the TIME Mode of pumping and displ ...

  • Omega Speaker Systems FPU5-MT-220 - page 17

    T able 2-5. UP and DOWN ARROW Keys Scrolling Limits If you last pressed the: The ARROW Keys Will Scroll Through: RPM key RPM settings from 10 RPM to 600 RPM TIME key SECONDS (from 0 to 59), MINUTES (from 0 to 59), and HOURS (from 0 to 12); for overall TIME settings from 00:00:00 to 12:59:59 FLOW RATE key FLOW RATE settings that depend on the tube s ...

  • Omega Speaker Systems FPU5-MT-220 - page 18

    T able 2-6. Rear View (cont’d) Item Description Function 33 Auxiliary OUT Terminals Allow remote monitoring of the motor’s start or stop status 34 LANGUAGE Button Changes the language of the pump messages in the display window 35 SMP Type K Thermocouple Allows the user to connect a Type K Connector thermocouple probe and measure a fluid’s tem ...

  • Omega Speaker Systems FPU5-MT-220 - page 19

    Parts of the Pump Motor 2 2-8 Notes ...

  • Omega Speaker Systems FPU5-MT-220 - page 20

    Getting Star ted 3-1 3 3.1 Attaching the Pump 3.1.1 Introduction There ar e five possible mounting configurations for using the peristaltic pump motor . T able 3-1 describes these mounting configurations. T able 3-1. Pump Motor Mounting Configurations Number of Pumps on Number of Pumps on Reference Section Left Side Right Side 10 3.1.2 01 3.1.2 20 ...

  • Omega Speaker Systems FPU5-MT-220 - page 21

    Getting Started 3 3-2 3.1.2 Attaching a Single Pump Directly to the Motor Perform ALL of the steps in Chapter 3 before turning the motor on. Refer to Figures 3-1 thr ough 3-4. Figure 3-1. Pump in Closed Position Figure 3-2. Aligning the Rotor Shaft Figure 3-3. Pump in Closed Position Figure 3-4. Aligning the Rotor Shaft 1. Remove the safety cover i ...

  • Omega Speaker Systems FPU5-MT-220 - page 22

    5. Refer to Figure 3-4. With the pump and motor aligned, insert the mounting screws through the mounting holes in the pump, until they make contact with the threaded mounting holes in the face of the motor . 6. Tighten the screws fully with a 9/64 (M3.5) allen wrench. 3.1.3 Stacking T wo Pumps on One Side of the Motor Perform ALL of the steps in Ch ...

  • Omega Speaker Systems FPU5-MT-220 - page 23

    3.2 Selecting T ubing Select a tubing material and size that is right for your application (the fluid and flow rate that you are pumping). T able 9-2 in Chapter 9, shows the average flow rates for different size tubing. Normalized flow rates (mL per revolution) vary significantly , based on motor speed, tubing materials, viscosity , and mechanical ...

  • Omega Speaker Systems FPU5-MT-220 - page 24

    Figure 3-11. Closing the Stator Figure 3-12. Adjusting the Clamp Screw 1. Refer to Figure 3-8 and Figure 3-9. Snap open the Stator by pushing the spring-loaded area of the Latch. Remove any old tubing from the pump, if necessar y . 2. Refer to Figure 3-8 and Figure 3-10. Loop the T ubing over the rollers. This is easy to do even for stacked pumps. ...

  • Omega Speaker Systems FPU5-MT-220 - page 25

    Getting Started 3 3-6 Notes ...

  • Omega Speaker Systems FPU5-MT-220 - page 26

    Tu rning on the Power 4-1 4 4.1 Introduction to the T wo Display Modes The pump motor has two modes of operation defined by whether or not the motor is running. Refer to T able 4-1. These two modes are known as the STOPPED Display Mode and the RUNNING Display Mode . T able 4-1. STOPPED vs. RUNNING Display Modes Condition Status During Status During ...

  • Omega Speaker Systems FPU5-MT-220 - page 27

    Turning on the Power 4 4-2 3. T urn on the unit’ s power . Y ou are now in the STOPPED Display Mode (refer to Figure 4-1). The motor and the pump(s) are stopped. The display flashes, indicating that the pump motor is waiting for you to do something. The non- flashing, green LEDs indicate the tubing inlets (refer to Section 5.2), but fluid is not ...

  • Omega Speaker Systems FPU5-MT-220 - page 28

    Operating the Pump Motor in the STOPPED Display Mode 5-1 5 5.1 Displaying Pump Messages in Five Different Languages The LANGUAGE button , located toward the bottom on the back of the pump motor , changes the language of the pump messages. 1. T o display pump messages in another language, press the LANGUAGE button . The language of the pump messages ...

  • Omega Speaker Systems FPU5-MT-220 - page 29

    T able 5-1. Pump Messages English French Spanish German Italian CAL OVERFLOW DÉPASSEM-ÉTALON! EXCES. CAL.! KAL ÜE BERLAUF! ECCEDENZA CALIB CALIBRATED! ÉTALONNE! CALIBRADO! KALIBRIERT! CALIBRATO Calibration FAIL ÉCHEC d’étalon FALLA Cal. KalibrierFEHLER Calib. FALLITA Dispensing... Remplissage... Bombeando... Pumpe läuft... Erogaz. in corso ...

  • Omega Speaker Systems FPU5-MT-220 - page 30

    5.2 Defining the Direction of Pumping The INLET SELECT key , left and right pump icons, and green LEDs define the direction of pumping by specifying the tubing inlets and outlets. 1. Refer to Figure 5-1. 2. T o determine the direction of pumping, look at the left and right pump icons and green LEDs. Only one of each pair of LEDs is lit. The lit LED ...

  • Omega Speaker Systems FPU5-MT-220 - page 31

    Figure 5-1. Defining the Direction of Pumping 3. T o change the direction of pumping, press the INLET SELECT key . The lit, green LEDs change positions. Fluid flows in the opposite direction. 4. T o change back to the original direction of pumping, simply press the INLET SELECT key again. 5.3 Selecting the T ubing Inner Diameter The TUBE ID , and U ...

  • Omega Speaker Systems FPU5-MT-220 - page 32

    1. Press the TUBE ID key . The display shows the last TUBE ID setting used, in inches or millimeters. T able 5-2 lists all the pre-programmed tubing inner diameters. 2. Use the UP and DOWN ARROW keys to enter a TUBE ID on the display . Once you start the pump motor , after selecting a mode (refer to Chapter 6), the pump will dispense fluid at a flo ...

  • Omega Speaker Systems FPU5-MT-220 - page 33

    5.4 Priming the T ubing Pressing the PRIME key causes the tubing to fill with fluid. 1. T o prime the tubing, press and hold down the PRIME key . As long as you hold down the PRIME key , fluid flows in the tubing, and the display shows “Priming...”. 2. T o stop priming a tube, simply release the PRIME key . The pump motor stops running, and flu ...

  • Omega Speaker Systems FPU5-MT-220 - page 34

    Since tubes of differ ent materials, sizes, ages, and durometers produce dif ferent flow rates, the CALIBRA TE key allows you to calibrate each piece of tubing you use. Calibration accuracy data is shown in T able 9-1 in Chapter 9. Once the tubing is calibrated, you no longer need to be concerned about flow rate variances outlines in T able 9-3. Al ...

  • Omega Speaker Systems FPU5-MT-220 - page 35

    10. After you have finished dispensing, press the ST ART/STOP key to stop the pump motor . Then measure the dispensed fluid’ s volume using your calibrated beaker . 11. When you have determined the volume of the dispensed fluid, use the UP and DOWN ARROW keys to enter this volume on the display . 12. Once the display shows the correct volume of f ...

  • Omega Speaker Systems FPU5-MT-220 - page 36

    5.6 Measuring the T emperature of a Fluid The TEMP key displays the temperature of the fluid, as measur ed via an optional T ype K thermocouple probe. The pump motor is equipped with an SMP T ype K female thermocouple jack, located near the bottom on the back of the pump motor . 1. T o measure the temperature of the fluid, plug one end of an option ...

  • Omega Speaker Systems FPU5-MT-220 - page 37

    Operating the Pump Motor in the STOPPED Display Mode 5 5-10 xxx mL/min FLOW RA TE ACTION Displays current FLOW RA TE setting Display shows Using the UP ARROW key (  ) will cause the FLOW RATE value to scroll up to the maximum FLOW RATE determined by TUBE ID then scrolls over to the minimum FLOW RATE. Using the DOWN ARROW key (  ) will cause t ...

  • Omega Speaker Systems FPU5-MT-220 - page 38

    Operating the Pump Motor in the RUNNING Display Mode 6-1 6 6.1 The RPM Mode Figure 6-1 shows the overall block diagram of the RPM Mode in the RUNNING Display Mode . Figure 6-1. Block Diagram: Pumping in the RPM Mode In the RPM Mode , you pump fluid at a certain motor speed, without setting the amount of time you pump or the volume you dispense. The ...

  • Omega Speaker Systems FPU5-MT-220 - page 39

    5. Use the UP and DOWN ARROW keys to enter the RPM setting you desire. Figure 6-2 shows the range of the RPM numbers you can work with. Figure 6-2. RPM Range 5. Once the display shows the RPM setting you desire, press the ST AR T/STOP key . As the fluid begins to dispense, the non-flashing display shows the actual RPM value of the pump. For details ...

  • Omega Speaker Systems FPU5-MT-220 - page 40

    6-3 T able 6-1 RPM MODE KEY DISPLA Y ACTION T AKEN SHOWS AND PROCEDURE xxx rpm Pump motor’s power NOTE: if you turn off the pump motor’s power, the pump stops running. To continue pumping, turn on the unit’s power. The display returns to the STOPPED Display Mode and shows the current RPM setting. The accumulated time of pumping and volume dis ...

  • Omega Speaker Systems FPU5-MT-220 - page 41

    6-4 T able 6-1 (cont’d) RPM MODE KEY DISPLA Y ACTION T AKEN SHOWS AND PROCEDURE FLOW RA TE xxx mL/min or xxx Liter/min Displays actual FLOW RATE Press the FLOW RATE key . The display flashes the fluid flow rate calculated for the RPM setting previously selected (xxx mL/min or xxx L/min). TOTAL VOLUME TUBE ID xxx mL or xxx Liters Displays current ...

  • Omega Speaker Systems FPU5-MT-220 - page 42

    6.2 The FLOW RA TE Mode Figure 6-3 shows the overall block diagram of the FLOW RA TE Mode in the RUNNING Display Mode . Figure 6-3. Block Diagram: Pumping in the FLOW RATE Mode In the FLOW RA TE Mode , you pump fluid at a certain flow rate, without setting the amount of time you pump or the amount of fluid you dispense. The pump motor measures the ...

  • Omega Speaker Systems FPU5-MT-220 - page 43

    5. Use the UP and DOWN ARROW keys to enter the FLOW RA TE setting you desire. Figure 6-4 shows the ranges allowed for the various tubing sizes. Figure 6-4. FLOW RATE Ranges Range (3/16” tube ID)  19 mL/min 20 mL/min . 499 mL/min 500 mL/min . 1 139 mL/min 1 140 mL/min Range (3/16” tube ID)  1 140 mL/min 1 139 mL/min . 500 mL/min 499 mL/min ...

  • Omega Speaker Systems FPU5-MT-220 - page 44

    Figure 6-4. FLOW RATE Ranges (cont’d) Range (4.0 mm tube ID)  15 mL/min 16 mL/min . 399 mL/min 400 mL/min . 856 mL/min 857 mL/min Range (4.0 mm tube ID)  857 mL/min 856 mL/min . 400 mL/min 399 mL/min . 16 mL/min 15 mL/min Range (5.0 mm tube ID)  21 mL/min 22 mL/min . 599 mL/min 600 mL/min . 1256 mL/min 1257 mL/min Range (5.0 mm tube ID) ...

  • Omega Speaker Systems FPU5-MT-220 - page 45

    Figure 6-4. FLOW RATE Ranges (cont’d) 6. Once the display shows the FLOW RA TE setting you desire, press the ST ART/STOP key . As the fluid begins to dispense, the non-flashing display shows the calculated fluid flow rate. Refer to Section 6.5 to learn about how to prevent tubing from moving through the pump. 7. T o stop pumping in the FLOW RA TE ...

  • Omega Speaker Systems FPU5-MT-220 - page 46

    6-9 T able 6-2 FLOW RA TE MODE KEY DISPLA Y ACTION T AKEN SHOWS AND PROCEDURE XXX mL/min or XXX L/min Pump motor’s power NOTE: if you turn off the pump motor’s power, the pump stops running. To continue pumping, turn on the unit’s power. The display returns to the STOPPED Display Mode and shows the current FLOW RATE setting. The accumulated t ...

  • Omega Speaker Systems FPU5-MT-220 - page 47

    6-10 T able 6-2 (cont’d) FLOW RA TE MODE KEY DISPLA Y ACTION T AKEN SHOWS AND PROCEDURE TIME FLOW RA TE xx:xx:xx Displays cumulative TIME since start Press the TIME key . The display flashes the time that the pump has been running (xx:xx:xx). xxx mL/min or xxx L/min Displays current FLOW RATE setting 1. Press the FLOW RATE key . The display flash ...

  • Omega Speaker Systems FPU5-MT-220 - page 48

    6.3 The TIME Mode Figure 6-5 shows the overall block diagram of the TIME Mode in the RUNNING Display Mode . Figure 6-5. Block Diagram: Pumping in the TIME Mode In the TIME Mode , you pump fluid at a certain motor speed or flow rate, for a particular amount of time. The pump motor uses the RPM or FLOW RA TE setting. It measures the volume of fluid d ...

  • Omega Speaker Systems FPU5-MT-220 - page 49

    4. When the display flashes the RPM or FLOW RA TE setting you desire, press the TIME key . The display shows the current TIME setting (xx:xx:xx) with either the HOURS, MINUTES, or SECONDS flashing. 5. T o change the HOURS setting, press the TIME key repeatedly , until the HOURS flash. Use the UP and DOWN ARROW keys to enter the HOURS setting you de ...

  • Omega Speaker Systems FPU5-MT-220 - page 50

    7. T o change the SECONDS setting, press the TIME key repeatedly , until the SECONDS flash. Use the UP and DOWN ARROW keys to enter the SECONDS setting you desire. 8. Once the display shows the TIME setting you desire, press the ST AR T/STOP key . As the fluid begins to dispense, the non-flashing display shows the actual time that the pump has been ...

  • Omega Speaker Systems FPU5-MT-220 - page 51

    6-14 T able 6-3 TIME MODE KEY DISPLA Y ACTION T AKEN SHOWS AND PROCEDURE xx:xx:xx Pump motor’s power NOTE: if you turn off the pump motor’s power, the pump stops running. To continue pumping, turn on the unit’s power. The display returns to the STOPPED Display Mode and shows the time elapsed during pumping. Then press the START/STOP key . ON/ ...

  • Omega Speaker Systems FPU5-MT-220 - page 52

    6-15 T able 6-3 (cont’d) TIME MODE KEY DISPLA Y ACTION T AKEN SHOWS AND PROCEDURE TIME xx:xx:xx Displays current TIME setting 1. Press the TIME key . The display flashes the TIME setting you selected just before starting the pump. 2. Use the UP and DOWN ARROW keys to enter the TIME setting you desire. As you use the UP and DOWN ARROW keys , the d ...

  • Omega Speaker Systems FPU5-MT-220 - page 53

    6.4 The TOT AL VOLUME Mode Figure 6-7 shows the overall block diagram of the TOT AL VOLUME Mode in the RUNNING Display Mode . Figure 6-7. Block Diagram: Pumping in the TOTAL VOLUME Mode In the TOT AL VOLUME Mode , you pump a specific quantity of fluid at a certain motor speed or flow rate. The pump motor uses the RPM or FLOW RA TE setting. It measu ...

  • Omega Speaker Systems FPU5-MT-220 - page 54

    Operating the Pump Motor in the RUNNING Display Mode 6 6-17 6.4.1 Pumping in the TOT AL VOLUME Mode To pump fluid in the TOT AL VOLUME Mode , do the following: 1. Set up the pump motor for pumping, according to Chapter 3. 2. T oggle the ON/OFF switch to turn on the unit’ s power . The display is in the STOPPED Display Mode . Refer to Figure 6-7. ...

  • Omega Speaker Systems FPU5-MT-220 - page 55

    6. Once the display shows the TOT AL VOLUME setting you desire, press the ST ART/STOP key . As the fluid begins to dispense, the non-flashing display shows the calculated volume of dispensed fluid, as it occurs in time. In the TOTAL VOLUME Mode , the pump stops running after it dispenses the TOTAL VOLUME requested. To stop pumping before that time, ...

  • Omega Speaker Systems FPU5-MT-220 - page 56

    6-19 T able 6-4 T OT AL VOLUME MODE KEY DISPLA Y ACTION T AKEN SHOWS AND PROCEDURE xxx mL or xxx Liters Pump motor’s power NOTE: if you turn off the pump motor’s power, the pump stops running. To continue pumping, turn on the unit’s power. The display returns to the STOPPED Display Mode and shows the volume of fluid dispensed during pumping. ...

  • Omega Speaker Systems FPU5-MT-220 - page 57

    6-20 T able 6-4 (cont’d) T OT AL VOLUME MODE KEY DISPLA Y ACTION T AKEN SHOWS AND PROCEDURE FLOW RA TE TOTAL VOLUME xxx mL/min or xxx L/min Displays actual FLOW RATE Press the FLOW RATE key . The display flashes the calculated fluid flow rate (xxx mL/min or xxx L/min). xxx mL or xxx Liters Displays current TOTAL VOLUME setting 1. Press the TOTAL ...

  • Omega Speaker Systems FPU5-MT-220 - page 58

    6.5 Preventing T ubing from Moving During Pump Operation Once you start the pump, you may need to adjust the Clamp Screw slightly , to prevent the tube fr om creeping (moving) through the pump. Cr eeping tends to occur on tubing of larger sizes and tubing made fr om low friction materials (for example, Santoprene). Use the following pr ocedure to e ...

  • Omega Speaker Systems FPU5-MT-220 - page 59

    Figure 6-10. Schematic of Auxiliary Out Circuit 1. Connect the circuit shown to the Auxiliar y Out terminals with the motor stopped. 2. Press the ST ART/STOP key . The motor starts, and the LED in the circuit goes off. 3. Press the ST ART/STOP key . The motor stops, and the LED in the circuit lights up. 6.6.2 Auxiliary In (Remote Star t/Stop) The A ...

  • Omega Speaker Systems FPU5-MT-220 - page 60

    Tr oubleshooting Guide 7-1 7 7.1 Display Error Messages Error Message Problem Solution CAL OVERFLOW! While calibrating, you 1. Repeatedly press the have allowed the motor CALIBRATE key until to run at a high RPM the message “Prime or setting for a very long START?” appears. time, or you have entered a total volume that would result in an inappr ...

  • Omega Speaker Systems FPU5-MT-220 - page 61

    Error Message Problem Solution Illegal Op Code 3. If the line voltage is (continued) inappropriate for the pump motor, move it to another line voltage source. B B There may be significant Check the pumping environment for electrical noise affecting devices that could be creating the pump motor. electrical noise. If possible, shut off these devices ...

  • Omega Speaker Systems FPU5-MT-220 - page 62

    Error Message Problem Solution Locked Rotor? B B (continued) There may be an internal problem. For internal problems, call Customer Service. Lost PHASE SYNC! There may be an internal problem. 1. Turn the unit’s power off and on, adjust the settings, and attempt to resume pumping. 2. If the problem persists, call Customer Service. Must SET RPM! A ...

  • Omega Speaker Systems FPU5-MT-220 - page 63

    Error Message Problem Solution Must STOP first! You have attempted to calibrate 1. Press the START/STOP key or change the direction of to stop the pump. Verify pumping while the pump that the display is in the is running. STOPPED Display Mode . 2. For information on how to change the direction of pumping, refer to Section 5.2. not applicable You ha ...

  • Omega Speaker Systems FPU5-MT-220 - page 64

    Error Message Problem Solution OVERCURRENT! 6. Make sure the tubing is not caught on the bottom roller. Reposition the roller slightly and reload the tubing, if necessary. 7. Make sure no part of the tubing is being constricted by a clamp. Loosen clamps if necessary. 8. Turn the unit’s power off and on, adjust the settings, and attempt to resume ...

  • Omega Speaker Systems FPU5-MT-220 - page 65

    Error Message Problem Solution Short Circuit? The motor should have stopped, 1. Turn the unit’s power off and but instead, it is still running. on, adjust the settings, and attempt to resume pumping. 2. If the problem persists, call Customer Service. >10,000 Liters!!! Your pumping has exceeded the 1. If you need to keep track maximum volume of ...

  • Omega Speaker Systems FPU5-MT-220 - page 66

    Error Message Problem Solution Watchdog Failure! A A The pump motor’s software was Turn the unit’s power off and on, unable to track whatever the adjust the settings, and attempt to pump was in the process of resume pumping. doing. B B The line voltage may be bad. 1. Use a multimeter to measure the line voltage used by the pump motor. 2. Compar ...

  • Omega Speaker Systems FPU5-MT-220 - page 67

    7.2 Other Pumping Problems Problem Solution 1. Make sure the line cord is plugged into an active wall socket. 2. Check to see if the fuse is blown. Replace if necessary. Refer to Chapter 9 for fuse ratings and chapter 8 for instructions on how to replace it. 3. Turn the unit’s power off and on, adjust the settings, and attempt to resume pumping. ...

  • Omega Speaker Systems FPU5-MT-220 - page 68

    Problem Solution No flow out of the tube outlet D (cont’d) If the previous solutions do not help your situation, there may be a problem with the way the tubing is loaded in the pump(s). 1. Observe how the tubing is loaded in the pump(s) and, if necessary, reload it. 2. Make sure the tubing has no holes or cracks. Replace with new tubing, or move ...

  • Omega Speaker Systems FPU5-MT-220 - page 69

    Problem Solution Motor will not turn 1. The tubing may be causing a jam. Observe how the tubing is loaded (OVERCURRENT condition) in the pump(s) and, if necessary, reload it. 2. Detach the pump(s) and check for a mechanical jam. Substitute another pump, if necessary. 3. Check to see if the fuse is blown. Replace if necessary. Refer to Chapter 9 for ...

  • Omega Speaker Systems FPU5-MT-220 - page 70

    Troubleshooting Guide 7 7-11 Notes ...

  • Omega Speaker Systems FPU5-MT-220 - page 71

    T echnical Details 8-1 8 8.1 Theor y of Operation The pump motor consists of an electric motor and a pulley assembly controlled by a micropr ocessor and circuit board. Driven by ac power , the motor produces a torque which drives the pulley assembly . The pulley assembly reduces the motor output speed and drives the pump. All of the pump motor ’s ...

  • Omega Speaker Systems FPU5-MT-220 - page 72

    Technical Details 8 8-2 Notes ...

  • Omega Speaker Systems FPU5-MT-220 - page 73

    Specifications 9-1 9 Maximum Fluid Back Pressure: 20 PSI Max Suction Lift: 20 feet of H 2 O (6.1 meters of H 2 O) Temperature Range (Fluid): -50°F to 300°F (-46°C to -149°C) Flow Rate: 1 to 2280 mL/min Motor: Reversible, 75 W ( 1 ⁄ 10 HP), 90 Vdc (10 to 600 rpm) Display: 16 character dot matrix LCD, 9 mm ( 3 ⁄ 8 ") high characters Powe ...

  • Omega Speaker Systems FPU5-MT-220 - page 74

    Flow rate tests were done with 20°C water at 0 PSI back pr essure. T able 9-2. A verage Flow Rates T ubing W all T ubing Size mL per Minimum Flow Maximum Flow Thickness Inner Diameter Revolution Rate at 600 RPM Rate at 600 RPM (mL/Minute) (mL/Minute) 1 ⁄ 16 " 1 ⁄ 32 " 0.05 1 30 1 ⁄ 16 " 1 ⁄ 16 " 0.22 3 132 1 ⁄ 16 &quo ...

  • Omega Speaker Systems FPU5-MT-220 - page 75

    T ubing operating life tests are done at 600 RPM, with 20°C water , 0 PSI back pressure until the tubing breaks. Average tubing life hours are shown. However , tubing life varies considerably depending on tubing formulation, tubing back pressure, and fluid pumped. T ubing should be inspected periodically for wear . T able 9-4. A verage T ubing Lif ...

  • Omega Speaker Systems FPU5-MT-220 - page 76

    T able 9-5. T ubing Size vs Min. Motor Speed Required for Priming * T ubing Size - ID Minimum Motor Speed (RPM) 1 ⁄ 32 " 300 1 ⁄ 16 " 250 1 ⁄ 8 " 100 3 ⁄ 16 "5 0 1 ⁄ 4 "5 0 5 ⁄ 16 "5 0 1mm 300 2mm 250 3mm 100 4mm 50 5mm 50 6mm 50 7mm 50 8mm 50 (* Tests are done using 20°C water, 0 psi back pressure) Specif ...

  • Omega Speaker Systems FPU5-MT-220 - page 77

    T able 9-6. A verage Flow Rates For Viscous Liquids T ubing W all T ubing Size Liquid Thickness Inner Diameter mL Per Revolution Viscosity Mineral Oil 1 ⁄ 16 " 1 ⁄ 32 "0 400 cps Mineral Oil 1 ⁄ 16 " 1 ⁄ 16 "0 . 005 400 cps Mineral Oil 1 ⁄ 16 " 1 ⁄ 8 " 0.04 400 cps Mineral Oil 1 ⁄ 16 " 3 ⁄ 16 " ...

  • Omega Speaker Systems FPU5-MT-220 - page 78

    Specifications 9 9-6 Notes ...

  • Omega Speaker Systems FPU5-MT-220 - page 79

    Spare Par ts and Accessories 10-1 10 The pump motor is equipped with a protective cover , which can be attached to whichever pump mounting site is not being used for pumping. Simply place the cover over the mounting site to avoid catching fingers or clothing in the groove of the motor shaft. Attach it with the two mounting screws pr ovided. T able ...

  • Omega Speaker Systems FPU5-MT-220 - page 80

    T able 10-2. Accessories (cont’d) Part Number * T ubing T ype Size Durometer (OD x ID) (Shore Hardness) RECOMMENDED TUBING TYPES AND SIZES TYVY Series Vinyl 3 ⁄ 16 x 1 ⁄ 16 68 TYVY Series Vinyl 1 ⁄ 4 x 1 ⁄ 8 68 TYVY Series Vinyl 5 ⁄ 32 x 1 ⁄ 32 68 TYVY Series Vinyl 5 ⁄ 16 x 3 ⁄ 16 68 TYVY Series Vinyl 3 ⁄ 8 x 1 ⁄ 4 68 TYVY Ser ...

  • Omega Speaker Systems FPU5-MT-220 - page 81

    Yo u can use optional Peristaltic Pumps (Part Number FPU500) with the motor . Figure 10-1 shows a pump. Y ou can attach one pump to each side of the motor or two pumps to either side. Contact Sales for more information about the pumps. Figure 10-1. Peristatic Pump Spare Parts and Accessories 10 10-3 ...

  • Omega Speaker Systems FPU5-MT-220 - page 82

    Spare Parts and Accessories 10 10-4 Notes ...

  • Omega Speaker Systems FPU5-MT-220 - page 83

    W ARRANTY / DISCLAIMER OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 25 months from date of purchase. OMEGA ’ s W ARRANTY adds an additional one (1) month grace period to the normal two (2) year product warranty to cover handling and shipping time. This ensures that OMEGA ’ s custo ...

Manufacturer Omega Speaker Systems Category Water System

Documents that we receive from a manufacturer of a Omega Speaker Systems FPU5-MT-220 can be divided into several groups. They are, among others:
- Omega Speaker Systems technical drawings
- FPU5-MT-220 manuals
- Omega Speaker Systems product data sheets
- information booklets
- or energy labels Omega Speaker Systems FPU5-MT-220
All of them are important, but the most important information from the point of view of use of the device are in the user manual Omega Speaker Systems FPU5-MT-220.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Omega Speaker Systems FPU5-MT-220, service manual, brief instructions and user manuals Omega Speaker Systems FPU5-MT-220. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Omega Speaker Systems FPU5-MT-220.

A complete manual for the device Omega Speaker Systems FPU5-MT-220, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Omega Speaker Systems FPU5-MT-220 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Omega Speaker Systems FPU5-MT-220.

A complete Omega Speaker Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Omega Speaker Systems FPU5-MT-220 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Omega Speaker Systems FPU5-MT-220, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Omega Speaker Systems FPU5-MT-220, that we can find in the current document
3. Tips how to use the basic functions of the device Omega Speaker Systems FPU5-MT-220 - which should help us in our first steps of using Omega Speaker Systems FPU5-MT-220
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Omega Speaker Systems FPU5-MT-220
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Omega Speaker Systems FPU5-MT-220 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Omega Speaker Systems FPU5-MT-220?

Use the form below

If you did not solve your problem by using a manual Omega Speaker Systems FPU5-MT-220, ask a question using the form below. If a user had a similar problem with Omega Speaker Systems FPU5-MT-220 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)