Manual Seagate ST400FM0073

82 pages Not applicable
Download

Go to site of 82

Summary
  • Seagate ST400FM0073 - page 1

    Product Manual Seagate ® 1200 SSD 100708406 Rev. A July 2013 High Endurance Limited Warranty with Media Usage 2.5” models Standard drives ST400FM0093 ST200FM0093 ST100FM0093 Self-Encrypting drives ST400FM0103 ST200FM0103 ST100FM0103 High Endurance Managed Life 2.5” models Standard drives ST400FM0113 ST200FM0113 ST100FM0113 High Endurance SED d ...

  • Seagate ST400FM0073 - page 2

    © 2012 Seagate Technology LLC. All rights reserved. Publication number: 100708406, Rev. A July 2013 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Seagate 1200 SSD and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or ...

  • Seagate ST400FM0073 - page 3

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A I C ONTENTS S EAGATE T ECHNOLOGY S UPPORT S ERVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.0 S COPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 A P ...

  • Seagate ST400FM0073 - page 4

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A II C ONTENTS 5.3.3 Hot plugging the drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5.3.4 S.M.A.R.T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 5.3.5 Thermal monitor . . . . . . . . . . . . ...

  • Seagate ST400FM0073 - page 5

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A III C ONTENTS 10.0 I NSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 10.1 D RIVE ORIENTATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 1 ...

  • Seagate ST400FM0073 - page 6

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A IV F IGURES Figure 1. Current profiles for 800GB standard and 400GB High Endurance models . . . . . . . . . . . . . . . 31 Figure 2. Current profiles for 400GB standard and 200GB high endurance models . . . . . . . . . . . . . . . 32 Figure 3. Current profiles for 200GB standard and 100GB high endurance ...

  • Seagate ST400FM0073 - page 7

    Seagate 1200 SSD Product Manual, Rev. A 1 For information regarding online support and services, visit http://www.seagate.com/about/contact-us/technical-support/ Available services include: • Presales & Technical support • Global Support Services telephone numbers & business hours • Authorized Service Centers Warranty terms will vary ...

  • Seagate ST400FM0073 - page 8

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 2 1.0 S COPE This manual describes Seagate Technology ® LLC, Seagate ® 1200 SSD (Serial Attached SCSI) drives. Seagate 1200 SSD drives support the SAS Protocol specifications to the extent described in this manual. The SAS Interface Manual (part number 100293071) describes the general SAS characterist ...

  • Seagate ST400FM0073 - page 9

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 3 2.0 A PPLICABLE STANDARDS AND REFERENCE DOCUMENTATION The drives documented in this manual have been developed as system peripherals to the highest standards of design and construction. The drives depend on host equipment to provide adequate power and environment for optimum performance and compliance ...

  • Seagate ST400FM0073 - page 10

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 4 Australian C-Tick If this model has the C-Tick Marking it complies with the Australia/New Zealand Standard AS/NZ CISPR22 and meets the Electromagnetic Compatibility (EMC) Framework requirements of Australia’s Spectrum Management Agency (SMA). Korean KCC If these drives have the Korean Communications ...

  • Seagate ST400FM0073 - page 11

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 5 2.2 R EFERENCE DOCUMENTS SCSI Commands Reference Manual Seagate part number: 100293068 SAS Interface Manual Seagate part number: 100293071 ANSI SAS Documents SFF-8144 54mm x 78.5mm Form Factor with micro serial connector SFF-8223 2.5” Drive Form Factor with Serial Connector SFF-8460 HSS Backplane De ...

  • Seagate ST400FM0073 - page 12

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 6 3.0 G ENERAL DESCRIPTION Seagate 1200 SSD drives provide high performance, high capacity data storage for a variety of systems with a Serial Attached SCSI (SAS) interface. The Serial Attached SCSI interface is designed to meet next-generation computing demands for performance, scalability, flexibility ...

  • Seagate ST400FM0073 - page 13

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 7 3.2 M EDIA DESCRIPTION The media used on the drive consists of Multi Layer Cell (MLC) NAND Flash for improved reliability and performance. 3.3 P ERFORMANCE • Firmware controlled multi-segmentable cache buffer • Up to 1200MB/s maximum instantaneous data transfers on 12Gb capable configurations. • ...

  • Seagate ST400FM0073 - page 14

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 8 3.6 P ROGRAMMABLE DRIVE CAPACITY Using the MODE SELECT command, the drive can change its capacity to something less than maximum. See the MODE SEL ECT (6) pa ramete r list tab le in the SAS Interface Manual , part number 100293071. A value of zero in the Number of Blocks field indicates that the drive ...

  • Seagate ST400FM0073 - page 15

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 9 3.8.4 FORMAT UNIT command A device which supports Thin Provisioning will be capable of performing a SCSI FORMAT UNIT command which allocates Logical Blocks Addresses that are not linked to Physical Block Locations. A FORMAT command will cause all LBAs to become unmapped. 3.8.5 Protection Information ( ...

  • Seagate ST400FM0073 - page 16

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 10 4.0 P ERFORMANCE CHARACTERISTICS This section provides detailed information concerning performance-related characteristics and features of Seagate 1200 SSD drives. 4.1 I NTERNAL DRIVE CHARACTERISTICS Flash Memory Type NAND MLC Emulated LBA Size 512, 520, 524, 528, 4096, 4160, 4192 or 4224 Native Prog ...

  • Seagate ST400FM0073 - page 17

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 11 4.2.2 FORMAT UNIT command execution time for 512-byte LBA’s (minutes) The device may be formatted as either a Thin Provisioned device or a Fully Provisioned device. The default format is Thin Provisioned and is recommended for most applications. Thin Provisioning provides the most flexibility for t ...

  • Seagate ST400FM0073 - page 18

    Standard 1.8” Models - Managed Life Notes ST400FM0023 ST400FM0043 ST200FM0023 ST200FM0043 Maximum Burst Transfer Rate 600MB/s Peak sequential 128KB read/write data transfer rate (MB/s max) [1] 550/500 Sustained sequential 128KB read/ write data transfer rate (MB/s) [1] 550/195 550/95 Peak 4KB random read/write command rate (IOPs) [2] 110,000/30,0 ...

  • Seagate ST400FM0073 - page 19

    High Endurance 2.5” Models - Limited Warranty with Media Usage Notes ST400FM0093 ST400FM0103 ST200FM0093 ST200FM0103 ST100FM0093 ST100FM0103 Maximum Burst Transfer Rate 1200MB/s Peak sequential 128KB read/write data transfer rate (MB/s max) [1] 750/500 750/400 Sustained sequential 128KB read/ write data transfer rate (MB/s) [1] Peak 4KB random re ...

  • Seagate ST400FM0073 - page 20

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 14 4.4 C ACHE CONTROL All default cache mode parameter values (Mode Page 08h) for standard OEM versions of this drive family are given in Section 11.3.2. 4.4.1 Caching write data Write caching is a write operation by the drive that makes use of a drive buffer storage area where the data to be written to ...

  • Seagate ST400FM0073 - page 21

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 15 5.0 R ELIABILITY SPECIFICATIONS The following reliability specifications assume correct host and drive operational interface, including all interface timings, power supply voltages, environmental requirements and drive mounting constraints. Read Error Rates 1 1. Error rate specified with automatic re ...

  • Seagate ST400FM0073 - page 22

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 16 5.1 E RROR RATES The error rates stated in this manual assume the following: • The drive is operated in accordance with this manual using DC power as defined in paragraph 6.3, "DC power require - ments." • Errors caused by host system failures are excluded from error rate computations. ...

  • Seagate ST400FM0073 - page 23

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 17 5.2.5 Data Retention Data Retention is another major characteristic of SSD's that must be accounted for by all the algorithms that the SSD implements. While powered up, the Data Retention of SSD cells are monitored and rewritten if the cell levels decay to an unexpected level. Data Retention whe ...

  • Seagate ST400FM0073 - page 24

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 18 5.3.4 S.M.A.R.T. S.M.A.R.T. is an acronym for Self-Monitoring Analysis and Reporting Technology. This technology is intended to recognize conditions that indicate imminent drive failure and is designed to provide sufficient warning of a failure to allow administrators to back up the data before an ac ...

  • Seagate ST400FM0073 - page 25

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 19 Predictive failures S.M.A.R.T. signals predictive failures when the drive is performing unacceptably for a period of time. The firmware keeps a running count of the number of times the error rate for each attribute is unacceptable. To accomplish this, a counter is incremented each time the error rate ...

  • Seagate ST400FM0073 - page 26

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 20 5.3.6.2 Implementation This section provides all of the information necessary to implement the DST function on this drive. 5.3.6.2.1 State of the drive prior to testing The drive must be in a ready state before issuing the SEND DIAGNOSTIC command. There are multiple reasons why a drive may not be rea ...

  • Seagate ST400FM0073 - page 27

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 21 5.3.6.2.5 Abort There are several ways to abort a diagnostic. Applications can use a SCSI Bus Reset or a Bus Device Reset message to abort the diagnostic. Applications can abort a DST executing in background mode by using the abort code in the DST Function Code field. This will cause a 01 (self-test ...

  • Seagate ST400FM0073 - page 28

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 22 6.0 P HYSICAL / ELECTRICAL SPECIFICATIONS This section provides information relating to the physical and electrical characteristics of the drive. 6.1 P OWER SPECIFICATIONS The 2.5” drive receives DC power (+5V and +12V) through the standard SAS interface. The 1.8" drive receives DC power (+3.3 ...

  • Seagate ST400FM0073 - page 29

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 23 6.3 DC POWER REQUIREMENTS Table 4 800GB standard 2.5” model DC power requirements (Models ST800FM0013, ST800FM0023, ST800FM0033, ST800FM0043, ST800FM0053, ST800FM0063) P ARAMETER 800GB (6.0Gb) Regulation [4] ±5% ±5% [2] Voltage +5V +12V [2] C URRENT (A) C URRENT (A) P OWER (W) Average idle curren ...

  • Seagate ST400FM0073 - page 30

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 24 Table 5 400GB standard 2.5” model DC power requirements (Models ST400FM0013, ST400FM0033, ST400FM0053, ST400FM0073) P ARAMETER 400GB (6.0Gb) Regulation [4] ±5% ±5% [2] Voltage +5V +12V [2] C URRENT (A) C URRENT (A) P OWER (W) Average idle current [1] DC  0.40 0.06 2.72 Maximum starting current ...

  • Seagate ST400FM0073 - page 31

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 25 Table 6 200GB standard 2.5” model DC power requirements (Models ST200FM0013, ST200FM0033, ST200FM0053, ST200FM0073) P ARAMETER 200GB (6.0Gb) Regulation [4] ±5% ±5% [2] Voltage +5V +12V [2] C URRENT (A) C URRENT (A) P OWER (W) Average idle current [1] DC  0.41 0.07 2.89 Maximum starting current ...

  • Seagate ST400FM0073 - page 32

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 26 Table 7 400GB high endurance 2.5” model DC power requirements (Models ST400FM0093, ST400FM0103, ST400FM0113, ST400FM0123) P ARAMETER 400GB H IGH E NDURANCE (6.0Gb) Regulation [4] ±5% ±5% [2] Voltage +5V +12V [2] C URRENT (A) C URRENT (A) P OWER (W) Average idle current [1] DC  0.42 0.10 3.30 M ...

  • Seagate ST400FM0073 - page 33

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 27 Table 8 200GB high endurance 2.5” model DC power requirements (Models ST200FM0093, ST200FM0103, ST200FM0113, ST200FM0123) P ARAMETER 200GB H IGH E NDURANCE (6.0Gb) Regulation [4] ±5% ±5% [2] Voltage +5V +12V [2] C URRENT (A) C URRENT (A) P OWER (W) Average idle current [1] DC  0.40 0.06 2.72 M ...

  • Seagate ST400FM0073 - page 34

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 28 Table 9 100GB high endurance 2.5” model DC power requirements (Models ST100FM0093, ST100FM0103, ST100FM0113, ST100FM0123) P ARAMETER 100GB H IGH E NDURANCE (6.0Gb) Regulation [4] ±5% ±5% [2] Voltage +5V +12V [2] C URRENT (A) C URRENT (A) P OWER (W) Average idle current [1] DC  0.41 0.07 2.89 M ...

  • Seagate ST400FM0073 - page 35

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 29 Table 10 400GB standard 1.8” model DC power requirements (Models ST400FM0023, ST400FM0043, ST400FM0063, ST400FM0083) P ARAMETER 400GB (6.0Gb) Regulation [4] ±5% ±5% Voltage +3.3V +5V C URRENT (A) C URRENT (A) P OWER (W) Average idle current DC  TBD TBD TBD Maximum starting current (peak DC) DC ...

  • Seagate ST400FM0073 - page 36

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 30 [1] Measured with average reading DC ammeter. Instantaneous +12V current peaks will exceed these values. Power sup - ply at nominal voltage. N (number of drives tested) = 6, 60 Degrees C ambient. [2] For +12 V, a –10% tolerance is allowed during initial start but must return to ±5% before reaching ...

  • Seagate ST400FM0073 - page 37

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 31 6.3.1 Conducted noise immunity Noise is specified as a periodic and random distribution of frequencies covering a defined frequency. Maximum allowed noise values given below are peak-to-peak measurements and apply at the drive power connector. 6.3.2 Power sequencing The drive does not require power s ...

  • Seagate ST400FM0073 - page 38

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 32 Figure 2. Current profiles for 400GB standard and 200GB high endurance models Figure 3. Current profiles for 200GB standard and 100GB high endurance models ...

  • Seagate ST400FM0073 - page 39

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 33 Figure 4. Current profiles for 400GB 1.8” models Figure 5. Current profiles for 200GB 1.8” models ...

  • Seagate ST400FM0073 - page 40

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 34 6.4 P OWER DISSIPATION 800GB standard 2.5” models in 6Gb operation (Models ST800FM0013, ST800FM0023, ST800FM0033, ST800FM0043, ST800FM0053, ST800FM0063) Typical power dissipation under idle conditions in 6Gb operation is 3.30 watts (11.26 BTUs per hour). To obtain operating power for typical random ...

  • Seagate ST400FM0073 - page 41

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 35 200GB standard 2.5” models in 6Gb operation (Models ST200FM0013, ST200FM0033, ST200FM0053, ST200FM0073) Typical power dissipation under idle conditions in 6Gb operation is 2.89 watts (9.86 BTUs per hour). To obtain operating power for typical random write operations, refer to the following I/O rate ...

  • Seagate ST400FM0073 - page 42

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 36 200GB high endurance 2.5” models in 6Gb operation (Models ST200FM0093, ST200FM0103, ST200FM0113, ST200FM0123) Typical power dissipation under idle conditions in 6Gb operation is 2.72 watts (9.28 BTUs per hour). To obtain operating power for typical random write operations, refer to the following I/ ...

  • Seagate ST400FM0073 - page 43

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 37 400GB standard 1.8” models in 6Gb operation (Models ST400FM0023, ST400FM0043, ST400FM0063, ST400FM0083) Typical power dissipation under idle conditions in 6Gb operation is TBD watts ( TBD BTUs per hour). To obtain operating power for typical random write operations, refer to the following I/O rate ...

  • Seagate ST400FM0073 - page 44

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 38 6.5 E NVIRONMENTAL LIMITS Temperature and humidity values experienced by the drive must be such that condensation does not occur on any drive part. Altitude and atmospheric pressure specifications are referenced to a standard day at 58.7°F (14.8°C). Maximum wet bulb temperature is 84.2°F (29°C). ...

  • Seagate ST400FM0073 - page 45

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 39 6.5.2 Relative humidity The values below assume that no condensation on the drive occurs. a. Operating 5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour. b. Non-operating 5% to 95% non-condensing relative humidity. 6.5.3 Effective altitude (sea level) a. Operating – ...

  • Seagate ST400FM0073 - page 46

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 40 Figure 16. Recommended mounting Note. Image may not represent actual product, for reference only. 6.5.4.2 Vibration a. Operating—normal The drive as installed for normal operation, shall comply with the complete specified performance while subjected to vibration: Vibration may be applied in the X, ...

  • Seagate ST400FM0073 - page 47

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 41 c. Non-operating The limits of non-operating vibration shall apply to all conditions of handling and transportation. This includes both iso - lated drives and integrated drives. The drive shall not incur physical damage or degraded performance as a result of vibration. Vibration may be applied in the ...

  • Seagate ST400FM0073 - page 48

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 42 6.6 M ECHANICAL SPECIFICATIONS Refer to Figure 17 or 18 for detailed mounting configuration dimensions. See Section 10.3, “Drive mounting.” Note. These dimensions conform to the Small Form Factor Standard documented in SFF-8201 and SFF-8223 found at www.sffcommittee.org . Figure 17. Mounting conf ...

  • Seagate ST400FM0073 - page 49

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 43 Note. These dimensions conform to the Small Form Factor Standard documented in SFF-8120 and SFF-8144 found at www.sffcommittee.org Figure 18. Mounting configuration dimensions (1.8” models) Weight: 0.220 pounds 100 grams ...

  • Seagate ST400FM0073 - page 50

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 44 7.0 A BOUT FIPS The Federal Information Processing Standard (FIPS) Publication 140-2 is a U.S. Government Computer Security Standard used to accredit cryptographic modules. It is titled 'Security Requirements for Cryptographic Modules (FIPS PUB 140-2)' and is issued by the National Institut ...

  • Seagate ST400FM0073 - page 51

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 45 8.0 A BOUT SELF - ENCRYPTING DRIVES Self-encrypting drives (SEDs) offer encryption and security services for the protection of st ored data, commonly known as “protection of data at rest.” These drives are compliant with the Trusted Computing Group (TCG) Enterprise Storage Specifications as detai ...

  • Seagate ST400FM0073 - page 52

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 46 8.4 D RIVE LOCKING In addition to changing the passwords, as described in Section 8.2.3, the owner should also set the data access controls for the individual bands. The variable "LockOnReset" should be set to "PowerCycle" to ensure that the data bands will be locked if power is l ...

  • Seagate ST400FM0073 - page 53

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 47 8.8 P OWER REQUIREMENTS The standard drive models and the SED drive models have identical hardware, however the security and encryption portion of the drive controller ASIC is enabled and functional in the SED models. This represents a small additional drain on the 5V supply of about 30mA and a comme ...

  • Seagate ST400FM0073 - page 54

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 48 9.0 D EFECT AND ERROR MANAGEMENT Seagate continues to use innovative technologies to manage defects and errors. These technologies are designed to increase data integrity, perform drive self-maintenance, and validate proper drive operation. SCSI defect and error management involves drive internal def ...

  • Seagate ST400FM0073 - page 55

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 49 9.4 A UTO -R EALLOCATION Auto-Reallocation allows the drive to reallocate unreadable locations on a subsequent write command if the recovery process deems the location to be defective. The drive performs auto-reallocation on every WRITE command. With each write to a Logical LBA, the drive writes the ...

  • Seagate ST400FM0073 - page 56

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 50 10.0 I NSTALLATION Seagate 1200 SSD drive installation is a plug-and-play process. There are no jumpers on the drive. SAS drives are designed to be used in a host system that provides a SAS-compatible backplane with bays designed to accommodate the drive. In such systems, the host system typically pr ...

  • Seagate ST400FM0073 - page 57

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 51 Figure 21. Air flow Note. Image may not represent actual product, for reference only. 10.3 D RIVE MOUNTING Mount the drive using the bottom or side mounting holes. If mounting the drive using the bottom holes, ensure not to physically distort the drive by attempting to mount it on a stiff, non-flat s ...

  • Seagate ST400FM0073 - page 58

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 52 11.0 I NTERFACE REQUIREMENTS This section partially describes the interface requirements as implemented on Seagate 1200 SSD drives. Additional information is provided in the SAS Interface Manual (part number 100293071). 11.1 SAS FEATURES This section lists the SAS-specific features supported by Seaga ...

  • Seagate ST400FM0073 - page 59

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 53 11.3 SCSI COMMANDS SUPPORTED Table 15 lists the SCSI commands supported by Seagate 1200 SSD drives. Table 15 Supported commands C OMMAND NAME C OMMAND CODE S UPPORTED CHANGE DEFINITION 40h N FORMAT UNIT [1] 04h Y DPRY bit supported N DCRT bit supported Y STPF bit supported Y IP bit supported Y DSP bi ...

  • Seagate ST400FM0073 - page 60

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 54 Information Exceptions Log page (2Fh) Y Last n Deferred Errors or Asynchronous Events page (0Bh) N Last n Error Events page (07h) N Non-medium Error page (06h) Y Pages Supported list (00h) Y Power Conditions Transitions page (1Ah) Y Protocol-Specific Port log pages (18h) Y Read Error Counter page (03 ...

  • Seagate ST400FM0073 - page 61

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 55 READ (10) 28h Y DPO bit supported Y FUA bit supported Y READ (12) A8h N READ (16) 88h Y READ (32) 7Fh/0009h Y READ BUFFER (modes 0, 2, 3, Ah And Bh supported) 3Ch Y (non-SED drives only) READ CAPACITY (10) 25h Y READ CAPACITY (16) 9Eh/10h Y READ DEFECT DATA (10) 37h Y READ DEFECT DATA (12) B7h Y READ ...

  • Seagate ST400FM0073 - page 62

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 56 [1] Seagate 1200 SSD drives can format to 512, 520, 524, 528, 4096, 4160, 4192 and 4224 bytes per logical block. [2] Warning. Power loss during a firmware upgrade can result in firmware corruption. This usually makes the drive inoper - able. [3] Reference MODE SENSE command 1Ah for mode pages support ...

  • Seagate ST400FM0073 - page 63

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 57 11.3.1 INQUIRY data Ta bl e 16 li st s the I NQ UIR Y com ma nd da ta t hat t he d riv e sh oul d re tur n to th e in iti at or pe r th e for ma t giv en in t he SAS Interface Manual . Table 16Seagate 1200 SSD INQUIRY data B YTES D ATA ( HEX ) 0-15 00 00 xx** 12 8B 01 PP 02 53 45 41 47 41 54 45 20 Ve ...

  • Seagate ST400FM0073 - page 64

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 58 ST100FM0023 53 54 31 30 30 46 4D 30 30 32 33 ST100FM0033 53 54 31 30 30 46 4D 30 30 33 33 ST100FM0043 53 54 31 30 30 46 4D 30 30 34 33 ST100FM0053 53 54 31 30 30 46 4D 30 30 35 33 ST100FM0063 53 54 31 30 30 46 4D 30 30 36 33 ST100FM0073 53 54 31 30 30 46 4D 30 30 37 33 ST100FM0083 53 54 31 30 30 46 4 ...

  • Seagate ST400FM0073 - page 65

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 59 Table 17 MODE SENSE data for 800GB drives MODE DATA HEADER: 01 5a 00 10 01 00 00 10 BLOCK DESCRIPTOR: 00 00 00 00 5d 26 ce b0 00 00 00 00 00 00 02 00 MODE PAGES: DEF 81 0a c0 01 5a 00 00 00 0b 00 ff ff CHG 81 0a 38 00 00 00 00 00 ff 00 00 00 DEF 82 0e 00 00 00 00 00 00 00 00 00 a0 00 00 00 00 CHG 82 ...

  • Seagate ST400FM0073 - page 66

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 60 Table 18 MODE SENSE data for 400GB drives MODE DATA HEADER: 01 5a 00 10 01 00 00 10 BLOCK DESCRIPTOR: 00 00 00 00 2e 93 90 b0 00 00 00 00 00 00 02 00 MODE PAGES: DEF 81 0a c0 01 5a 00 00 00 0b 00 ff ff CHG 81 0a 38 00 00 00 00 00 ff 00 00 00 DEF 82 0e 00 00 00 00 00 00 00 00 00 a0 00 00 00 00 CHG 82 ...

  • Seagate ST400FM0073 - page 67

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 61 Table 19 MODE SENSE data for 200GB drives MODE DATA HEADER: 01 5a 00 10 01 00 00 10 BLOCK DESCRIPTOR: 00 00 00 00 17 49 f1 b0 00 00 00 00 00 00 02 00 MODE PAGES: DEF 81 0a c0 01 5a 00 00 00 0b 00 ff ff CHG 81 0a 38 00 00 00 00 00 ff 00 00 00 DEF 82 0e 00 00 00 00 00 00 00 00 00 a0 00 00 00 00 CHG 82 ...

  • Seagate ST400FM0073 - page 68

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 62 Table 20 MODE SENSE values for 100GB drives MODE DATA HEADER: 01 5a 00 10 01 00 00 10 BLOCK DESCRIPTOR: 00 00 00 00 0b a5 22 30 00 00 00 00 00 00 02 00 MODE PAGES: DEF 81 0a 00 01 5a 00 00 00 0b 00 ff ff CHG 81 0a 08 00 00 00 00 00 ff 00 00 00 DEF 82 0e 00 00 00 00 00 00 00 00 00 a0 00 00 00 00 CHG 8 ...

  • Seagate ST400FM0073 - page 69

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 63 11.4 M ISCELLANEOUS OPERATING FEATURES AND CONDITIONS Table 21 lists various features and conditions. A “Y” in the support column indicates the feature or condition is supported. An “N” in the support column indicates the feature or condition is not supported. 11.4.1 SAS physical interface Fi ...

  • Seagate ST400FM0073 - page 70

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 64 Figure 23. SAS device plug dimensions C OF DATUM B L 5.08 1.27 (6X) 1.27 (14X) 15.875 0.35MIN 15.875 33.43 0.05 B 4.90 0.08 0.84 0.05 (22X) 0.15 B P15 P1 S7 S1 SEE Detail1 0.30 0.05 (4X) 4.00 0.08 0.15 D 0.30 0.05 (2X) 41.13 0.15 B B C C A A 0.20 B 42.73 REF. C OF DATUM D L 1.10 R0.30 0.08 (4X) 2.00 ...

  • Seagate ST400FM0073 - page 71

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 65 Figure 24. SAS device plug dimensions (detail) 6.10 Detail A 0.30 0.05 x 45 (5X) 0.40 0.05 X 45 (3X) CORING ALLOWED IN THIS AREA. 2.25 0.05 4.85 0.05 0.10 B E S14 S8 4.40 0.15 SEE Detail 2 3.90 0.15 SECTION A - A SECTION C - C A 0.35 0.05 45 R0.30 0.08 C 1.95 0.08 0.08 0.05 1.23 0.05 0.08 0.05 Detail ...

  • Seagate ST400FM0073 - page 72

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 66 Figure 25. Micro SAS device plug dimensions ...

  • Seagate ST400FM0073 - page 73

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 67 Figure 26. Micro SAS device plug dimensions (detail) ...

  • Seagate ST400FM0073 - page 74

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 68 11.4.2 Physical characteristics This section defines physical interface connector. 11.4.3 Connector requirements Contact a preferred connector manufacturer for mating part information. Part numbers for SAS connectors will be provided in a future revision of this publication when production parts are ...

  • Seagate ST400FM0073 - page 75

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 69 Table 24 Micro SAS pin descriptions P IN S IGNAL NAME S IGNAL TYPE P IN S IGNAL NAME S IGNAL TYPE S1 Port A Ground P1* 3.3 Volts S2* +Port A_in Diff. input pair P2 3.3 Volts charge S3* -Port A_in P3 Ground S4 Port A Ground P4 Ground S5* -Port A_out Diff output pair P5 5 Volts charge S6* +Port A_out P ...

  • Seagate ST400FM0073 - page 76

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 70 11.4.7 Power The drive receives power (+3.3 volts, +5 volts and +12 volts) through the SAS device connector. Three +12 volt pins provide power to the drive, 2 short and 1 long. The current return for the +12 volt power supply is through the common ground pins. The supply current and return current mu ...

  • Seagate ST400FM0073 - page 77

    S EAGATE 1200 SSD P RODUCT M ANUAL , R EV . A 71 11.5.2 Differential signals The drive SAS differential signals comply with the intra-enclosure (internal connector) requirements of the SAS standard. Table 27 defines the general interface characteristics 11.6 SAS-3 S PECIFICATION COMPLIANCE Seagate SAS-3 drives are entirely compatible with the SAS-3 ...

  • Seagate ST400FM0073 - page 78

    Seagate 1200 SSD Product Manual, Rev. A 72 Index Numerics 12 volt pins 70 5 volt pins 70 6 Gbps 71 A abort task set function 52 AC coupling 69 AC power requirements 22 ACA active status 63 ACA active, faulted initiator status 63 access time average latency 10 average typical 10 page to page typical 10 active LED Out signal 70 Admin SP 45 AES-256 da ...

  • Seagate ST400FM0073 - page 79

    Seagate 1200 SSD Product Manual, Rev. A 73 electromagnetic susceptibility 41 EMI requirements 3 encryption engine 45 encryption key 46 Endurance 15 Endurance Management 16 environment 50 environmental limits 38 requirements 15 environmental control 41 EraseMaster 45 error management 48 rates 16 Error reported to Host 9 errors 48 European Union Rest ...

  • Seagate ST400FM0073 - page 80

    Seagate 1200 SSD Product Manual, Rev. A 74 Condition met/good 63 Good 63 Reservation conflict 63 Task set full 63 miscorrected media data 15 Mode sense data, table 58 , 59 , 60 , 61 mounting 51 holes 51 orientations 50 mounting configuration 42 mounting configuration dimensions 42 , 43 MSID 45 MTBF 15 , 17 N NIST website 44 noise audible 3 noise im ...

  • Seagate ST400FM0073 - page 81

    Seagate 1200 SSD Product Manual, Rev. A 75 SAS Interface Manual 3 , 5 SAS-2 Specification 71 SCSI interface commands supported 53 Seagate Technology Support Services 1 Secure ID 45 Security Protocol In 45 Security Protocol Out 45 security providers 45 segmented caching 63 self-encrypting drives 45 Self-Monitoring Analysis and Reporting Technology 7 ...

  • Seagate ST400FM0073 - page 82

    Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Bo ...

Manufacturer Seagate Category Solid state drive (SSD)

Documents that we receive from a manufacturer of a Seagate ST400FM0073 can be divided into several groups. They are, among others:
- Seagate technical drawings
- ST400FM0073 manuals
- Seagate product data sheets
- information booklets
- or energy labels Seagate ST400FM0073
All of them are important, but the most important information from the point of view of use of the device are in the user manual Seagate ST400FM0073.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Seagate ST400FM0073, service manual, brief instructions and user manuals Seagate ST400FM0073. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Seagate ST400FM0073.

Similar manuals

A complete manual for the device Seagate ST400FM0073, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Seagate ST400FM0073 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Seagate ST400FM0073.

A complete Seagate manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Seagate ST400FM0073 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Seagate ST400FM0073, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Seagate ST400FM0073, that we can find in the current document
3. Tips how to use the basic functions of the device Seagate ST400FM0073 - which should help us in our first steps of using Seagate ST400FM0073
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Seagate ST400FM0073
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Seagate ST400FM0073 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Seagate ST400FM0073?

Use the form below

If you did not solve your problem by using a manual Seagate ST400FM0073, ask a question using the form below. If a user had a similar problem with Seagate ST400FM0073 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)