Manual Oki 1145 MFP

177 pages 1.93 mb
Download

Go to site of 177

Summary
  • Oki 1145 MFP - page 1

    Operat ors Manua l for F ax Function CX1145 MFP 59313901, Rev . 1.0 ...

  • Oki 1145 MFP - page 2

    1 CONTENTS Preface ......... .............. ....................... .............. ...................... .............. ...................... .. ....... . .......... .......... 3 Features of the GD-1201 ............. .............. .............. .............. .............. .............. .............. ....... ............. .... 4 General Prec ...

  • Oki 1145 MFP - page 3

    2 CONTENTS (Cont.) 3. Lists/Reports Samples ... .............. .............. .............. .............. .............. .............. .............. ... ........... 129 7. REGISTERING AND SETTING IT EMS........... ..................................................... ...................... ......... 1 43 1. Setting the Initial Transmission Mo d ...

  • Oki 1145 MFP - page 4

    3 Preface Thank you for purchasing the OKI fax unit GD -1201. This Operato r ’s Manual describes the following: • How to use the Fax functions • How to perform a Fax communication • How to inspect this equipment and perform its maintenance • How to remedy Fax com munication problem s Before using this equipment, thoroughly read and und er ...

  • Oki 1145 MFP - page 5

    4 Features of the GD-1201 • Super G3 Hi gh-Speed Communication High-speed communication in th e Super G3 mode is enabled. * “Super G3 Fax” is an appellation of Fax machin es with a modem compatible with ITU-T V .34, which is a new high-speed modem standard. • JBIG Encoding System This device uses a JBIG encoding system compatib le with stan ...

  • Oki 1145 MFP - page 6

    5 General Precautions When power failure occurs • Neither Fax nor telephon e functions of the device are available in th e event of a power failure. • Y o u can use the external telephone to dial a number to make a call or to receive a call. (See the oper- ator ’s manual of your telephone set for details.) • The originals stored in the memo ...

  • Oki 1145 MFP - page 7

    ...

  • Oki 1145 MFP - page 8

    7 1 1. BEFORE USING 1. Description of Each Component ... ................ ................ .................... ................ ................ ..... 8 • Main components ............ .............. ...................... .............. ...................... .............. ............. .... .............8 • Configuration of options ......... ...

  • Oki 1145 MFP - page 9

    8 1.BEFORE USING FAX 1 1. Description of Each Component Main component s OKI CX 1 145 MFP 1. Front cover 10. Receiving tray 2. Drawers 1 1. Color toner (Cyan/Magenta/Y ellow) 3. Operator ’s Manual pocket (Back side) 12. Original glass 4. Power switch 13. T ouch panel 5. Automati c duplexer 14. Control panel 6. Bypass tray 15. Black toner 7. Paper ...

  • Oki 1145 MFP - page 10

    9 1 Configuration of options 1. F AX Unit (GD-1201) This unit enables you to transmit and receive F AX data. 2. 2nd Line Board (GD-1260 ) This board enables the use of 2 lines. 2 1 ...

  • Oki 1145 MFP - page 11

    10 1.BEFORE USING FAX 1.Description of Each Co mponent (Cont.) 1 Control p anel Use the buttons on the control panel for various operations and settings. 1. [HELP] button Use this button to display a desired operation procedure. 2. [USER FUNCTIONS] button Use this button for paper size or media type setting of drawers, and registration of the copy ...

  • Oki 1145 MFP - page 12

    11 1 11 . [JOB ST A TUS] button Use this button to confirm the job status, printing status, and F AX transmission/reception status of a print job, scan job and F AX job. (  P .62 “1.Checking T ransmission Resul t”) 12. [ACCESS] button Use this button when the equipment is managed u nder the de partment man agement or the user man- agement. I ...

  • Oki 1145 MFP - page 13

    12 1.BEFORE USING FAX 1.Description of Each Co mponent (Cont.) 1 T ouch panel When you press the [F AX] button on the control panel, the fun ctions currently selected or used and the status of the equipment are displayed on the touch panel. When a graphic symbol indicating an erroneou s status such as a paper jam is blinking, see Chapter 9 “BLINK ...

  • Oki 1145 MFP - page 14

    13 1 Clearing and cancel ing function selected When you press the selected button (h i ghlighted or shaded) again, the func tion selected with this button is cleared. T o quit (can cel) the sett ing, press the [CANCEL] button at the bottom of the touch panel (or the [ALL CLEAR] button on the address book menu). Buttons on the touch panel which are ...

  • Oki 1145 MFP - page 15

    14 1.BEFORE USING FAX 1.Description of Each Co mponent (Cont.) 1 Connecting cables Be sure that the power of the equipment is turned OFF before connecting the cables. Do not connect this equipment and a telepho ne to a telephone connector in parallel. OKI CX 1 145 MFP 1. LINE2 Connect a telephone line when the 2 nd Lin e Board (optional) is install ...

  • Oki 1145 MFP - page 16

    15 2 2. SENDING A F AX 1. T rans mission Mode .......... ................ ................. ................ ................... ................ .............. .. 16 2. Preparation for T rans mission ........... ................. ................ ................ ................ ................ ... 18 3. About Originals ......................... ...

  • Oki 1145 MFP - page 17

    16 2.SENDING A FAX 2 1. T ransmission Mode • Memory T ransmission The original is scanned into memory and automatically starts to be sent once a connection has been made. Using this mode, you can send the same original to 2 or more remote Faxes (multi-address transmission). • Direct T ransmission The remote Fa x is dialed immediately , and the ...

  • Oki 1145 MFP - page 18

    17 2 • Delayed Communica tions Y o u can send the original to a specified remote Fax at a specified time. This mode is useful when you are making use of night-time discounts or sending originals overseas. • Chain Dial Communication When using the Fax communica tion network, you can combine 2 or more dialing ope rations (by address book and dire ...

  • Oki 1145 MFP - page 19

    18 2.SENDING A FAX 2 2. Prep aration for T ransmission Switching to the Fax mode When the use of the equipm ent is managed un der certain functions such as dep artment manag ement When the use of the equipment is managed unde r the department management or the user management, each user needs to enter the depart ment code, user ID, password, etc. T ...

  • Oki 1145 MFP - page 20

    19 2 3. About Originals Original size/Origi nal scanning range Original size The following table shows the size a nd thickness of original s that can be transmitted via this system . Original scanning range As shown in the figu res below , even if the original that you a re sending contains information in th e shaded section, this information is no ...

  • Oki 1145 MFP - page 21

    20 2.SENDING A FAX 3.About Originals (Cont.) 2 Setting originals When setting originals on the glass Originals are sent in the order they are place d on the original glass in both memory TX and direct TX modes. 3 Lower the Original Cover (optional) or the Reversing Automatic Docu- ment Feeder (optional) slowly . 1 Raise the Original Cover (optional ...

  • Oki 1145 MFP - page 22

    21 2 Precautions for using the Revers ing Automatic Document Feeder Do not use the following 1 to 8 type origin als as they may misfeed or become damaged: Also, the following 9 to 10 type originals should be handled carefully: 1: Badly wrinkled or folded original s; in particular , originals whose leading edge is curled may fail to be correctly fed ...

  • Oki 1145 MFP - page 23

    22 2.SENDING A FAX 3.About Originals (Cont.) 2 When using the Reversing Automa tic Document Feeder (optional) When the originals are placed on the Reversing Automatic Document Feeder , the uppermost page is the first to be scanned and sent. 1 Af ter alignin g the edges of originals, place them with thei r face up and slide the guides to the width o ...

  • Oki 1145 MFP - page 24

    23 2 4. Setting the T ransmission Conditions V ariety of optional functions Originals can be sent using different transmission c onditi ons (resolution, original mode, exposure, trans- mission mode, original si ze, ECM, quality TX, Line, SUB/SEP , SID/PWD, subjec t and body). Settings for the subject and body are available onl y when you are using ...

  • Oki 1145 MFP - page 25

    24 2.SENDING A FAX 4.Setting the Transmission Conditions (Cont.) 2 • Quality TX: Set whether or not to specify Quality TX. This fu nction makes the communica tion less affected by line condition when transmitting docu ment to overseas. When this mode is set to “ON” , originals are sent at a slower speed than normal. ON, OFF • Line: S pecify ...

  • Oki 1145 MFP - page 26

    25 2 Setting the transmission conditions 1 Place the original(s). •  P .20 “Setting originals” 2 Press the [F AX] button on the control p anel. 3 Press the [ADDRESS] button to en ter the address menu, and then press the [OPTION] button. 4 Press the desired buttons to set the transmission co nditions, and then press the [E NTER] button. • ...

  • Oki 1145 MFP - page 27

    26 2.SENDING A FAX 4.Setting the Transmission Conditions (Cont.) 2 5 Specify the remote Fax and press the [ST ART] button. ...

  • Oki 1145 MFP - page 28

    27 2 Sending diffe rent wid th originals When you select the [DIFFERENT WI DTH] button in the “ORIGINAL” of the transmission conditi on, the originals with different width can be sent at a time using Reversing Automatic Document F eeder . Available combinations of the original size are as fo llows. (Not ava ilable for the combination of L T for ...

  • Oki 1145 MFP - page 29

    28 2.SENDING A FAX 4.Setting the Transmission Conditions (Cont.) 2 5 Specify the remote Fax and press the [ST ART] button. ...

  • Oki 1145 MFP - page 30

    29 2 Setting the scanning conditions for each p age When you want to send multi-page originals by pla ci ng them on the origina l glas s, you can change the fol- lowing scanning conditions for each page: Resolution Exposure Original mode Original size This function is co nvenient for newspapers and books can be placed on the original glass and sent ...

  • Oki 1145 MFP - page 31

    30 2.SENDING A FAX 4.Setting the Transmission Conditions (Cont.) 2 8 Press the [ST ART] button. • The second original is scanned. • If there is another original to be scanned, repeat steps 6 through 8. Be sure to carry out the operations within 45 seconds after the “T o continue place document on glass, and press ST ART” appears. If the equ ...

  • Oki 1145 MFP - page 32

    31 2 5. S pecifying the Remote Fax Direct entry with digit al keys Direct entry is the method for specifying remote Fax numbers using the digital keys. 1 Place the original(s). •  P .20 “Setting originals” 2 Press the [F AX] button on the control p anel. 4 If you make a mist ake, press the [CLEAR] button on the control p anel or the [BACK ...

  • Oki 1145 MFP - page 33

    32 2.SENDING A FAX 5.S pecifying the Re mote Fax (Cont.) 2 Address book entry Address boo k entry is t h e method for spec ifying remo te Fax numbers by pressing the remote Fax buttons which have previously been registered. It is con venient if frequently used destinatio ns are registere d in the address book. • Registering the address book, see ...

  • Oki 1145 MFP - page 34

    33 2 Group entry Group entry is the method of specifying remote Fax numbers by pressin g the group button which has pre- viously been ente red. It is convenient if fre quently use d multiple destinations are ente red into a group. • Creating Groups, see the [User Functions Guide] or the [T opAccess Guide]. 1 Place the original(s). •  P .20 ? ...

  • Oki 1145 MFP - page 35

    34 2.SENDING A FAX 5.S pecifying the Re mote Fax (Cont.) 2 Searching by ID number When selecting the remo te Faxes registered in the a ddress and group by searching by the ID numb er immediately displays the screen i ncl uding the searched-for ID number . 1 Place the original(s). •  P .20 “Setting originals” 2 Press the [F AX] button on th ...

  • Oki 1145 MFP - page 36

    35 2 5 Press the button for the remote Fa x that you want to send to. • Each screen displays 8 destinations. T o view destinations not displayed on the screen, press the [Prev] or [Next] button to switch the screens. • T o continue searching by ID num ber , press the [KNOWN ID] button. • T o continue searching by address (  P .36 “Search ...

  • Oki 1145 MFP - page 37

    36 2.SENDING A FAX 5.S pecifying the Re mote Fax (Cont.) 2 Searching by address (Search address) When selecting the remote F axes registered in the address b ook and group, pressing a letter butto n leads to display the remote Faxes whose names start with the letter and/or numbers, which makes it easy to choose the desire d remote Faxes. 1 Place th ...

  • Oki 1145 MFP - page 38

    37 2 5 Enter the ideal button or number , and then press th e [ENTER] button. 6 Press the [SEARCH] button. ...

  • Oki 1145 MFP - page 39

    38 2.SENDING A FAX 5.S pecifying the Re mote Fax (Cont.) 2 7 Press the button for the remote Fax th at you want to send to, and then press the [ENTER] button. • If the remote F AX to be selected is one, the direct tr ansmission (On-hook T r ans mission) can be performed. • Each screen displays 8 destinations. T o view destinations not displayed ...

  • Oki 1145 MFP - page 40

    39 2 Searching address using LDAP server Without using the address book in this equipment, yo u can select the remote Faxes registered in the address book of the LDAP (Li ghtweight Directory Access Pro tocol) server via n etwor k. In this case, it is required to register the directory se arch name usin g T opAcce ss via network beforehan d. (Y ou c ...

  • Oki 1145 MFP - page 41

    40 2.SENDING A FAX 5.S pecifying the Re mote Fax (Cont.) 2 5 Press the directory search name that you want to search, and then press the [ENTER] button 6 Search the remote Fax, and then send it. • Follow the procedure from step 4 in  P .36 “Searching by addre ss (Search address)”. * Searching using the LDAP ser ver is available for Fax num ...

  • Oki 1145 MFP - page 42

    41 2 Multi-address transmission The multi-address transmission functi on allows you to send the same document to 2 or more remote Faxes in a single operatio n, which can be done by combining direct, address bo ok and group entry . Com- bining with the Internet Fax function is also availa bl e. This eliminate s the need of placing the original and t ...

  • Oki 1145 MFP - page 43

    42 2.SENDING A FAX 5.S pecifying the Re mote Fax (Cont.) 2 Confirming the destinations After specifying multiple destinations by using mu lti-address transmitting, you can confirm the addresses in the list by pressing the [DESTINA TION] button. Y ou can also delete the addresses by pressing the [DELETE] button. 1 Press the [DESTINA TION] button. ? ...

  • Oki 1145 MFP - page 44

    43 2 6. Sending Originals Direct transmission In the direct tran smission mode, the remote F ax is immediately dialed , and the origin als are sent after a successful connection with the remote Fax that has been completed. • Users can check immediately if the orig inal has been sent to the re mote Fax. • Once scanned, the ori ginals ar e not st ...

  • Oki 1145 MFP - page 45

    44 2.SENDING A FAX 6.Sending Originals (Cont.) 2 5 Specify the remote Fax. • S pecifying by digital keys (  P .3 1 “Direct entry with digital keys”) • S pecifying by address book (  P .32 “Address book entry”) 6 Press the [ST ART] button. • The remote Fax is dialed immediately and communication is initiated. • Canceling the di ...

  • Oki 1145 MFP - page 46

    45 2 Memory transmission In the memory transmission mode, originals are scanned at high speed and temp or arily stored in memory before transmitting. • Up to 100 transmissions can be reserved. • Up to 1000 pages can be stored in 1 transmission. • Y ou ca n specify two or more remote Faxes at one time. • If the origina l cannot be sent (the ...

  • Oki 1145 MFP - page 47

    46 2.SENDING A FAX 6.Sending Originals (Cont.) 2 5 Specify the remote Fax. • S pecifying by digital keys (  P .3 1 “Direct entry with digital keys”) • S pecifying by address book (  P .32 “Address book entry”) • S pecifying by group (  P .33 “Group entry”) • S pecifying by multi-address transmission (  P .41 “Multi ...

  • Oki 1145 MFP - page 48

    47 2 Other transmissions On-hook transmission In this mode, you can confirm the answering tone fr om the re mote F AX witho ut picking up the handset of the external telephone. When the other party receives the call as a telephone ca ll, you can talk by picking up the handset of the external telephone. • This operation is availabl e when the Line ...

  • Oki 1145 MFP - page 49

    48 2.SENDING A FAX 6.Sending Originals (Cont.) 2 Off-hook transmission This mode is available by picking up the handset of the externa l tel ephone to dial. When the other party receives the call a s a telephone call, you can talk with him/her . • This operation is availabl e when the Line 1 lamp is OFF . • An external telephone is required (no ...

  • Oki 1145 MFP - page 50

    49 2 Sending a T one T one services can be used even o n pulse dial lines. This function can be used when a user uses “Pulse Dial” line. 1 T o receive a tone service, press the [#] button of the digit al key to switch over to tone transmission. • For details of services and how to receive Fax information ser- vices, contact your service provi ...

  • Oki 1145 MFP - page 51

    2 50 2.SENDING A FAX ...

  • Oki 1145 MFP - page 52

    51 3 3. RECEIVING A F AX 1. Reception Modes .... ................ ................ ................ ................ ................ .................... ...... ... 52 2. Reception Settings ........................ ................ ................ ................. ................ ................ .. .... 53 3. Relationship between Original and ...

  • Oki 1145 MFP - page 53

    52 3.RECEIVING A FAX 3 1. Reception Modes • Automatic Reception Faxes are automatically receiv ed d uring the incoming call. The line is designated for use exclusively by the Fax. • Manual Re ception Faxes are received when the user confirms the call on the telephone, pre s s the [MANUAL RECEIVE] button in the advance d menu and then the [ST AR ...

  • Oki 1145 MFP - page 54

    53 3 2. Reception Settings There are 2 reception modes: auto reception and manual reception. • AUTO receptio n Set this mode when the phone line is used exclusively for Faxing. The Fax automatically receives incoming originals. The reception mode of li ne 2 is "Auto reception". • MANUAL reception Set this mode when the Fax is connecte ...

  • Oki 1145 MFP - page 55

    54 3.RECEIVING A FAX 2.Reception Settings (Cont.) 3 3 Enter the administrator p assword (6 to 10 digits), and then press the [ENTER] button. • Ask your administrator for the administrator password. 4 Press the [F AX] button. 5 Press the [INITIAL SETUP] button. ...

  • Oki 1145 MFP - page 56

    55 3 6 Press the [AUT O] or [MANUAL] butto n to select the reception mode, and then press th e [ENTER] button . ...

  • Oki 1145 MFP - page 57

    56 3.RECEIVING A FAX 2.Reception Settings (Cont.) 3 Manual reception * An external telephone is required (not avail able for the European version). 1 When the bell rings, pick up the handset of the external telephone. • If the incoming call is a telephone call, start talking with the other party . 3 Press the [ADV ANCED] button to en ter the adva ...

  • Oki 1145 MFP - page 58

    57 3 3. Relationship between Original and Paper Accept able size of paper Originals received by Fax can be printed on LD, LG , L T , ST , A3, B4, A4, B5 and A5 size paper , and are printed in the printing range of each size of paper . No printing will occur in the margins borders of the received originals as indicated by the gray borders on the fig ...

  • Oki 1145 MFP - page 59

    58 3.RECEIVING A FAX 3.Relationship between Orig inal and Paper (Cont.) 3 Paper priority when there is n o same size p aper When RX reduction printing and disca rd printing are set to “ON”, paper is selected according to the follow- ing priority: 1. Paper of the same size and same orientation as the received original 2. Paper of the same size b ...

  • Oki 1145 MFP - page 60

    59 3 • European Size The paper priority varies according to the RX reduction printing and discard printing setti ngs. For details, contact your service technician. Size of Original being Received Priority A3 B4 A4 A4 A5 FOLIO A3 B4 B4 A4 A4 A4 A5 FOLIO A3 A3 A3 FOLIO B4 FOLIO B5 B4 A3 B5 B4 A3 A4 A4 A4 FOLIO 1. 2. 3. 4. 5. 6. 7. 8. A4 Reduced to ...

  • Oki 1145 MFP - page 61

    3 60 3.RECEIVING A FAX ...

  • Oki 1145 MFP - page 62

    61 4 4. CHECKING AND CANCELING THE COMMUNICA TIONS 1. Checking T ransmission Result ................ ...... .......... ................... ................. ................ ......... 62 • Checking reserved transmissions .......................... ................... ............ ........... .............. ............. ...... 62 • Checking com ...

  • Oki 1145 MFP - page 63

    62 4.CHECKING AND CANCELING THE COMMUNICATIONS 4 1. Checking T ransmission Result Checking reserved transmissions Y ou can check the following information of the transmission status (job) in the list on the touch panel. • File number • Receiver • Accepted date • Number of originals • T ran smission status Line1: Sending on line 1 Line2: S ...

  • Oki 1145 MFP - page 64

    63 4 Releasing the department code error In the status column of “Fax/Internet F AX JOB” li st, the job which is in “Invalid” status may appear . In this case, release the invalid job as follows. 1. Enter user information required to use the equipment from the control panel. 2. Select the file with the invalid code, and press the [RELEASE] ...

  • Oki 1145 MFP - page 65

    64 4.CHECKING AND CANCELING THE COMMUNICATIONS 1.Checking T r ansmission Result (Cont.) 4 Checking communicat ion status (log) Y ou can check the following information of the commun ication status (log) in the list on the touch panel. • File number • Receiver or sender • Accepted date • Number of originals • Communica tion result OK: T ra ...

  • Oki 1145 MFP - page 66

    65 4 • If the desired file columns are not displayed, press the [Prev] or [Next] button to switch the screens. • T o output the list with the transmission or re ception result, press the [JOURNAL] butt on. (  P .1 16 “1.Manually Printing Lists & Reports”) ...

  • Oki 1145 MFP - page 67

    66 4.CHECKING AND CANCELING THE COMMUNICATIONS 1.Checking T r ansmission Result (Cont.) 4 Address registration fr om send/receive log Y ou can register the information such as the remo te Fax numbers and E-mail addresses in the address book from the send/receive l og screen. * The following informa tion can be registered from the Send log: • Remo ...

  • Oki 1145 MFP - page 68

    67 4 4 Select the item button y ou want to register , and then enter the recipi- ent's or sender's information. • See the [Operator's Manual for Basi c Function] for entering letters. • ID number is automatically numbered. • See the [User Functions Guide] for registering and correcting the address book. 5 Press the [ENTER] butt ...

  • Oki 1145 MFP - page 69

    68 4.CHECKING AND CANCELING THE COMMUNICATIONS 4 2. Canceling T ransmissions Canceling transmissions (during scanning) When an or iginal is being scan ned on the orig inal glass: 1 When scanning of the original is finished, press the [JOB CANCEL]. • If you press the [JOB FINISH] button or do nothing for about 45 seconds after finishing the scanni ...

  • Oki 1145 MFP - page 70

    69 4 2 T o cancel the job, press the [JOB CANCEL] button while scanning is p aused. • T o resume scanning, press the [ST ART] button on the control panel. • When the [JOB FINISH] button is pressed, the sc anned data of the original(s) start to be transmitted. • T o change the setting of the scanning condi tions, press the [OPTION] button. ( ? ...

  • Oki 1145 MFP - page 71

    70 4.CHECKING AND CANCELING THE COMMUNICATIONS 2.Canceling T ransmissions (Cont.) 4 Canceling reserved memory transmissions This function allows you to cance l reserved memory transmissions that are current l y stored in the memory and waiting to be sent (including Delayed Transmi ssion Reservation and Poling Transmission/Reception). 1 Press the [J ...

  • Oki 1145 MFP - page 72

    71 4 Canceling transmissions (d uring memory transmission) 1 Press the [JOB ST A TUS] button on the control p anel. 2 Press the [F AX] button. 3 Select the file that is currently being transmitted. • Check that the status column indicates “Line1” (trans mitting via line 1) or “Line2” (transmitting via line 2). 4 Press the [DELETE] button. ...

  • Oki 1145 MFP - page 73

    72 4.CHECKING AND CANCELING THE COMMUNICATIONS 2.Canceling T ransmissions (Cont.) 4 Canceling direct transm ission (during scanning) 1 Press the [STOP] button during transmis- sion (scanning). • The transmission (scanning) operation is stopped. Even if you cancel transmission in the direct TX mode, the part of the original that was scanned before ...

  • Oki 1145 MFP - page 74

    73 5 5. ADV ANCED FUNCTIONS 1. T rans mitting 2-Sided Originals ............. ................... ....................... ................... ................... 74 2. Priority T ransmiss ion ........... ................. ................ ................... ................ ................ ......... .... 76 3. Polling Communication ....... ...... ...

  • Oki 1145 MFP - page 75

    74 5.ADVANCED FUNCTIONS 5 1. T ransmitting 2-Sided Originals This function is used to scan and transmit 2-si ded originals with the Reversing Automatic Document Feeder (optional ). • Placing 2-sided A4/L T originals When you place a 2-sided original on the Reversing Automatic Document Feeder (optional ), change the direction of the original depen ...

  • Oki 1145 MFP - page 76

    75 5 4 Press the [ADV ANCED] button to en ter the advanced menu, and then press the [2-SIDED SCAN] button. 5 Press the [BOOK] or [T ABLET] button depending on the b ound posi- tion of the original(s), and then press the [ENTER] button. 6 Specify the remote Fax • Entering the Fax number (  P .31 “Direct entry with digital keys”) • Selecti ...

  • Oki 1145 MFP - page 77

    76 5.ADVANCED FUNCTIONS 5 2. Priority T ransmission Priority T ransmission allows you to perform a transmissi on prior to other reserved transmissions (including redial standby). • For this function, on ly a direct dialing method ( with digital keys) and an address book e ntry method are available. • Only one remote Fax can be specified per one ...

  • Oki 1145 MFP - page 78

    77 5 3. Polling Communication This function is used when you want to rece ive a Fax from a sender upon your request. The receiver can receive the Fax whenever he or she wan t s. This function is set at the sender's side by storing the data of an original into memory . This operation is called polling transmissio n. The polling reser- vation is ...

  • Oki 1145 MFP - page 79

    78 5.ADVANCED FUNCTIONS 3.Polling Communication (Cont.) 5 6 Press the [ST ART] button. • Scanning start s and the scanned data will be stored in a memory . • Canceling the poll ing transmission (  P .70 “ Canceling reserved memory transmissions”) ...

  • Oki 1145 MFP - page 80

    79 5 Polling reception There are 2 types of polling reception as follows: • Individual polling recep tion: Receiving a Fax from one sender • Multi-polling reception: Rece iving a Fax from 2 or more senders in a singl e operation. This function can be used in combination with the di rect dialing, ad dress book entry and group entry . 1 Press the ...

  • Oki 1145 MFP - page 81

    80 5.ADVANCED FUNCTIONS 5 4. Mailbox Communication This function is used to commu nicate between Fax mach ines compatible with a mailbox function (ITU-T compatible). The owners of these Fax machines can input or retrieve the data of original s in the mailbox. There are 3 types of mailbox; confid ential mailbox, bulleti n board mailbox and multi-add ...

  • Oki 1145 MFP - page 82

    81 5 Setting up mailbox for confidential and bulletin boa rd communication How to create a confidential mailbox or bulleti n box mailbox on sender's side is explained here. 1 Press the [F AX] button on the control p anel. 2 Press the [ADV ANCED] button to en ter the advanced menu, and then press the [ITU MAILBOX] button. 3 Press the [CONFIDENT ...

  • Oki 1145 MFP - page 83

    82 5.ADVANCED FUNCTIONS 4.Mailbox Communication (Cont.) 5 5 Press the [BOX NUMBER] button to en ter the next me nu, key in the box number(s) (maximum 20 digit s), and then press the [ENTER] but- ton. • If you want to set up a password, press the [P ASSWORD] button to enter the next menu, key in the p assword (maximum 20 digits) and then press the ...

  • Oki 1145 MFP - page 84

    83 5 Setting up relay mailbox How to create a relay mailbox on sender's side is explain ed here. 1 Press the [F AX] button on the control p anel. 2 Press the [ADV ANCED] button to en ter the advanced menu, and then press the [ITU MAILBOX] button. 3 Press the [RELA Y] button, and then press the [BOX SETUP] button. 4 Press the [ENTER] button. ...

  • Oki 1145 MFP - page 85

    84 5.ADVANCED FUNCTIONS 4.Mailbox Communication (Cont.) 5 5 Press the [BOX NUMBER] button to en ter the next me nu, key in the box number(s) (maximum 20 digit s), and then press the [ENTER] but- ton. • If you want to set up a password, press the [P ASSWORD] button to enter the next menu, key in the p assword (maximum 20 digits) and then press the ...

  • Oki 1145 MFP - page 86

    85 5 8 If you want to send the relay dest ination transmission report, press the [YES] button. • If you press the [NO] button here, steps 9 and 10 are not necessary . • For the relay destination transmission report, see  P .120 “2.Automatically Printing Lists & Reports”. The default operation of the relay destination transmission rep ...

  • Oki 1145 MFP - page 87

    86 5.ADVANCED FUNCTIONS 4.Mailbox Communication (Cont.) 5 11 Press the [AL W A YS] button to always print out th e received Fax, or press the [ON ERROR] button to print it out only when the relay trans- mission has failed. ...

  • Oki 1145 MFP - page 88

    87 5 Deleting mailbox How to delete a mai lbox no longe r needed is explai ned here. 1 Press the [F AX] button on the control p anel. 2 Press the [ADV ANCED] button to en ter the advanced menu, and then press the [ITU MAILBOX] button. 3 Press the [CONFIDENTIAL] (or [BUL LETIN BD.] or [RELA Y]) button, and then press the [BOX DELETE] button. 4 Press ...

  • Oki 1145 MFP - page 89

    88 5.ADVANCED FUNCTIONS 4.Mailbox Communication (Cont.) 5 5 Press the [BOX NUMBER] button to en ter the next me nu, key in the box number(s) (maximum 20 digit s), and then press the [ENTER] but- ton. • If a password h as been set, press the [P ASSWORD] button to enter the next menu, key in the p assword (max- imum 20 digits) and then press the [E ...

  • Oki 1145 MFP - page 90

    89 5 Modifying relay mailbox How to modify the content of a relay mailbox is explained here. 1 Press the [F AX] button on the control p anel. 2 Press the [ADV ANCED] button to en ter the advanced menu, and then press the [ITU MAILBOX] button. 3 Press the [RELA Y] button, and th en press the [MODIFY] button. 4 Press the [ENTER] button. • If the se ...

  • Oki 1145 MFP - page 91

    90 5.ADVANCED FUNCTIONS 4.Mailbox Communication (Cont.) 5 5 Press the [BOX NUMBER] button to en ter the next me nu, key in the box number(s) (maximum 20 digit s), and then press the [ENTER] but- ton. • If a password h as been set, press the [P ASSWORD] button to enter the next menu, key in the p assword (max- imum 20 digits) and then press the [E ...

  • Oki 1145 MFP - page 92

    91 5 9 If you want to send the relay dest ination transmission report, press the [YES] button. • If you press the [NO] button here, steps 10 and 1 1 are not necessary . • For the relay destination transmission report, see (  P .120 “2.Automatically Printing Lists & Reports”). 10 Specify the remote Fax to receive the relay destinat io ...

  • Oki 1145 MFP - page 93

    92 5.ADVANCED FUNCTIONS 4.Mailbox Communication (Cont.) 5 Printing Fax out of mailbox How to print a Fax out of a confidential mailbox or a bulletin board mailbox on the sender's side is explained here. 1 Press the [F AX] button on the control p anel. 2 Press the [ADV ANCED] button to en ter the advanced menu, and then press the [ITU MAILBOX] ...

  • Oki 1145 MFP - page 94

    93 5 5 Press the [BOX NUMBER] button to en ter the next me nu, key in the box number(s) (maximum 20 digit s), and then press the [ENTER] but- ton. • If a p assword has been set, press the [P ASSWORD] button to enter the next menu, key in the password (max- imum 20 digits) and then press the [ENTER] button. 6 Press the [ST ART] button. • If ther ...

  • Oki 1145 MFP - page 95

    94 5.ADVANCED FUNCTIONS 4.Mailbox Communication (Cont.) 5 5 Press the [CONFIDENTIAL] (or [BUL LETIN BD.]) butt on, and then press the [INPUT] button. 6 Press the [ENTER] button. • If the selected mailbox has not been set, "No entry" appears. 7 Press the [BOX NUMBER] button to en ter the next me nu, key in the box number(s) (maximum 20 d ...

  • Oki 1145 MFP - page 96

    95 5 Canceling dat a in mailbox How to delete Fax data in a confidential mailbox or a bulletin board mailbox on the sender's side is explained here. 1 Press the [F AX] button on the control p anel. 2 Press the [ADV ANCED] button to en ter the advanced menu, and then press the [ITU MAILBOX] button. 3 Press the [CONFIDENTIAL] (or [BUL LETIN BD.] ...

  • Oki 1145 MFP - page 97

    96 5.ADVANCED FUNCTIONS 4.Mailbox Communication (Cont.) 5 7 Press the [YES] button. • The data has been deleted from the mailbox. • If the box number keyed in is not correct, "No entry" appear s. If the password keyed in is not correct, "Invalid number" appears. Key in the correct box numb er or password. T ransmitting Fax t ...

  • Oki 1145 MFP - page 98

    97 5 5 Press the [CONFIDENTIAL] (or [BUL LETIN BD.] or [RELA Y]) button, and then press the [TRANSMIT] button. 6 Press the [ENTER] button. 7 Press the [BOX NUMBER] button to en ter the next me nu, key in the box number(s) (maximum 20 digit s), and then press the [ENTER] but- ton. • If a p assword has been set, press the [P ASSWORD] button to ente ...

  • Oki 1145 MFP - page 99

    98 5.ADVANCED FUNCTIONS 4.Mailbox Communication (Cont.) 5 Polling dat a out of mailbox How to poll (retrieve) Fax data out of a confidential ma ilbox or a bulletin board ma ilbox on receiver's side (remote Fax) is explained here. 1 Press the [F AX] button on the control p anel. 2 Press the [ADV ANCED] button to en ter the advanced menu, and th ...

  • Oki 1145 MFP - page 100

    99 5 5 Press the [BOX NUMBER] button to en ter the next me nu, key in the box number(s) (maximum 20 digit s), and then press the [ENTER] but- ton. • If a p assword has been set, press the [P ASSWORD] button to enter the next menu, key in the password (max- imum 20 digits) and then press the [ENTER] button. A password entry is necessary for the da ...

  • Oki 1145 MFP - page 101

    100 5.ADVANCED FUNCTIONS 5 5. Chain Dial Communication This function is used when you want to combine seve ral numbers to select re mote Fax machine s using long distance carriers and specialized access lines. Y ou can combine sets of nu mbers (address book entry and direct entry) by first pressi ng the [CHAIN DIAL COMM.] button. * 128 digits of nu ...

  • Oki 1145 MFP - page 102

    101 5 6 Specify the number to be dialed next either from the address book or by direct dialing. • e.g. Press the [Italy 39] button in the address book as an international code, and then press the [Rome Office] button in the address book. 7 Press the [ST ART] button. • The transmission will start in the order of the remote Fax machines entered. ...

  • Oki 1145 MFP - page 103

    102 5.ADVANCED FUNCTIONS 5 6. Delayed T ransmission Reservation This function is used when you want to transmit a Fax at a specified date and ti me. It is useful when you want to make use of off-peak discounts (e.g. nighttime) or you want to tra nsmit a Fax to a country which has a time difference. • The acceptable range of reservation is up to o ...

  • Oki 1145 MFP - page 104

    103 5 6 Press the [ENTER] button. 7 Specify the remote Fax • Entering the Fax number (  P .31 “Direct entry with digital keys”) • Selecting from address book (  P .32 “Address boo k entry”) • Selecting by group registration (  P .33 “Group entry”) • Selecting using multi- address transmission (  P .41 “Multi-addres ...

  • Oki 1145 MFP - page 105

    104 5.ADVANCED FUNCTIONS 6.Delayed T ransmission Reservation (Cont.) 5 4 Press the [RELEASE] button. • The reservation is canceled and the memory transmission is performed . • Canceling the delayed transmission reserv ation of which status is "Wait" (  P .70 “C anceling reserved mem- ory transmissions”) • Canceling delayed tr ...

  • Oki 1145 MFP - page 106

    105 5 7. Recovery T ransmission This function is used to tran smit a Fax without pla c ing an original again when the Fax wa s not transmitted after the specified number of redial. The Fax data of the failed transmission wil l be retained in a memory , and you can select and retrieve the data to tran smit again in the operation on the touch panel. ...

  • Oki 1145 MFP - page 107

    106 5.ADVANCED FUNCTIONS 7.Recovery T ransmission (Cont.) 5 Canceling recovery transmission 1 Press the [F AX] button on the control p anel. 2 Press the [ADV ANCED] button to en ter the advanced menu, and then press the [RECOVER Y TX] button. 3 Select the dat a you wan t to cancel. 4 Press the [JOB CANCEL] button. 5 Press the [YES] button. ...

  • Oki 1145 MFP - page 108

    107 5 8. Onramp Gateway Onramp gateway overview This function is used to transmi t a Fax from a Fax machine with a mailbox function to an E-mail address registered in the mailbo x of a relay station through the relay station. Rela y Bo x OKI CX1145 MFP Mail Serv er ITU-T compatible G3 F AX Internet F AX machine Mail Serv er P ersonal Computer Mail ...

  • Oki 1145 MFP - page 109

    108 5.ADVANCED FUNCTIONS 8.Onramp Gateway (Cont.) 5 Setting relay mailbox T o use this equipment as a relay station for an onramp gateway transmission, set up a relay mailbox on this equipment and then register an E-mail address as a relay desti nation. When the onramp gateway function is used, al l Fax machines with the mai lbox function can trans ...

  • Oki 1145 MFP - page 110

    109 5 9. Offramp Gateway Offramp gateway overview This function is used to convert an E-mail, received at thi s equipment as a relay station, into a Fax dat a and forward it to another Fax machine through a public te lephone line. It is useful when you want to reduce communication cost by using both the Intern et and public telephone lines. For exa ...

  • Oki 1145 MFP - page 111

    110 5.ADVANCED FUNCTIONS 9.Offramp Gateway (Cont.) 5 T o receive an E-mail using SMTP This equipment receives E-mails using a Simple Mail Transfer Protocol (SMTP) to enable the offramp gateway transmission. SMTP is a server protocol for se nding E-mails fro m a client PC to a mail server or between servers. When the SMTP server setting is enable d ...

  • Oki 1145 MFP - page 112

    111 5 10. Save as File This function is used to save tran smitted Fax data to t he shared folder of this device or a network folder you specify . Once the data is saved to the desir ed location, you can access the files using Windows Explorer or My Network Pl aces. * T o save a Fax data into a client PC, the network ad ministrator has to make so me ...

  • Oki 1145 MFP - page 113

    112 5.ADVANCED FUNCTIONS 10.Save as File (Cont.) 5 4 Press the [FILE NAME] button to ente r the file name (maximum 45 let- ters) of the original to be saved, and then press the [ENTER] button. • T o enter letters, see the Operator's Manual for Basic Function. 5 Select the location where the data is saved. • [MFP LOCAL]: Select it when the ...

  • Oki 1145 MFP - page 114

    113 5 6 Select the file format. • [PDF (MUL TI)]: Select it when the data should be saved as a multiple-page PDF file. • [PDF (SINGLE)]: Select it when the data should be saved as a single-page PDF file. • [TIFF (MUL TI)]: Select it when the data should be saved as a multiple-page TIFF file. • [TIFF (SINGLE)]: Select it when the data should ...

  • Oki 1145 MFP - page 115

    5 114 5.ADVANCED FUNCTIONS ...

  • Oki 1145 MFP - page 116

    115 6 6. PRINTING LISTS AND REPORTS 1. Manually Printing Lists & Reports ........ ......... ....... ................ ................ ................... ........... 1 16 2. Automatically Printing Lists & Reports ....... ... ............. ................ ................. ................ ....... 120 • Automatically printing lists & ...

  • Oki 1145 MFP - page 117

    116 6.PRINTING LISTS AND REPORTS 6 1. Manually Printing List s & Report s Y ou can print the following lists and reports. * Lists and reports are printed on L T/A4-size p aper . If the equipment has run o ut of L T/A4-size p ape r , lis ts and reports will be printed on l arger sized paper . • T ransmission jour nal: List of transmissions. Ou ...

  • Oki 1145 MFP - page 118

    117 6 2 Press the [LOG] button to enter th e log menu, and then press the [SEND] or [RECEIVE] button. 3 Press the [JOURNAL] button. • The journals will be output. • If the [JOURNAL] button is pressed with a file selected, the journal of the selected file for one tr ansmission is output. ...

  • Oki 1145 MFP - page 119

    118 6.PRINTING LISTS AND REPORTS 1.Manually Printing Lists & Reports (Cont.) 6 Error code t a ble If an error occurs during communicatio ns, an error c ode is indicated in the transmissio n journal, reception journal or memory transmission journal. See the following table for the remedy . If you encounter an error code not listed here, please r ...

  • Oki 1145 MFP - page 120

    119 6 Printing ITU mailbox list 2 Press the [ADV ANCED] button to en ter the advanced menu, and then press the [ITU MAILBOX LIST] button. • The ITU mailbox list is output. 1 Press the [F AX] button on the control pa n e l . ...

  • Oki 1145 MFP - page 121

    120 6.PRINTING LISTS AND REPORTS 6 2. Automatically Printing List s & Report s Automatically printing list s & reports Reports are automatica lly output if the conditions in the setting of the lists & reports output (  P .121 “Set- ting the lists and reports output”) are satisfied. * Lists and reports are printed on L T/A4-size p ...

  • Oki 1145 MFP - page 122

    121 6 Setting the list s and reports output Setting the (transmission/reception) journal output and its number • AUTO: ON, OFF Setting whether the transmission/receptio n journal should be output automatica lly . • T ran smission journal: 40,120 Setting the number of communicati ons on t he transmission jo urnal as 40 or 12 0. • Reception jou ...

  • Oki 1145 MFP - page 123

    122 6.PRINTING LISTS AND REPORTS 2.Automatically Printing Lists & Reports (Cont.) 6 4 Press the [LIST/REPORT] button. 5 Press the [REPORT SETTING] button. 6 Press the [JOURNAL] button. ...

  • Oki 1145 MFP - page 124

    123 6 7 Press the [ON] or [OFF] button. • The default setting is ON. 8 Select the desired number (eit her 40 or 120 commu nications). • The default setting is 40. 9 Press the [ENTER] button. Setting the communication report output The following condition s of the comm unication report output ca n be set. MEMORY TX: OFF , AL W A YS, ON ERROR DIR ...

  • Oki 1145 MFP - page 125

    124 6.PRINTING LISTS AND REPORTS 2.Automatically Printing Lists & Reports (Cont.) 6 2 Press the [ADMIN] button and then press the [P ASSWORD] button. 3 Enter the administrator p assword (6 to 10 digits), and then press the [ENTER] button. • Ask your administrator to the administrator password. 4 Press the [LIST/REPORT] button. ...

  • Oki 1145 MFP - page 126

    125 6 5 Press the [REPORT SETTING] button. 6 Press the [COMM. REPORT] button. 7 Press the desired buttons for each item. • If the button for the desired function is not shown, press the [Ne xt] button to switch screens. • The icons highlighted in the screen below are the default settings. However , the [AL WA YS] buttons are selected for all re ...

  • Oki 1145 MFP - page 127

    126 6.PRINTING LISTS AND REPORTS 2.Automatically Printing Lists & Reports (Cont.) 6 8 Press the [ENTER] button. Setting the reception list output • LOCAL: ON, OFF Setting whether the mailbox reception repo rt should be printed when the original is stored in the local mailbox. • REMOTE: ON, OFF Setting whether the mailbox reception report sh ...

  • Oki 1145 MFP - page 128

    127 6 3 Enter the administrator p assword (6 to 10 digits), and then press the [ENTER] button. • Ask your administrator to the administrator password. 4 Press the [LIST/REPORT] button. 5 Press the [REPORT SETTING] button. ...

  • Oki 1145 MFP - page 129

    128 6.PRINTING LISTS AND REPORTS 2.Automatically Printing Lists & Reports (Cont.) 6 6 Press the [RECEPTION LIST] button. 7 Press the desired buttons for each item. • The icons highlighted in the screen below are the default settings. However , the default setting for European versions is as follows: RELA Y ST A TION: ON LOCAL: OFF REMOTE: ON ...

  • Oki 1145 MFP - page 130

    129 6 3. List s/Report s Samples T ransmission journal (Manua lly and automatically output) This is the list of the transmissi on-related information such as comm unication results and remote Fax numbers. • Output information for the l ast 40 or 120 commu nicat ions can be confirmed. Switch ing the number of communications output. (  P .121 ? ...

  • Oki 1145 MFP - page 131

    130 6.PRINTING LISTS AND REPORTS 3.Lists/Reports Samples (Cont.) 6 NO. FILE NO. DATE TIME DURATION PGS TO DEPT MODE STATUS 001 002 07.10 16:59 00:23 1 Redfield HS EC 603 OK 002 010 07.10 17:33 00:00 0 2123456789 P 00B5 TRANSMISSION JOURNAL XXXXXXXXXXX XXXX-XXX TIME : 07-10-'05 17:55 FAX NO.1 : 2131234567 FAX NO.2 : 2131235678 NAME : Aaabbb L.A ...

  • Oki 1145 MFP - page 132

    131 6 Reception journal (Manually and automatically output) This is the list of the reception -related information such as communication resu lts and remo te Fax num- bers. • Output information for the l ast 40 or 120 commu nicat ions can be confirmed. Switch ing the number of communications output. (  P .121 “Setting the (tra nsmission/rec ...

  • Oki 1145 MFP - page 133

    132 6.PRINTING LISTS AND REPORTS 3.Lists/Reports Samples (Cont.) 6 Reservation list (Manually output) This is the list of the jobs that are standi ng by for transmission and recove ry transmission. • The mark on the “TO” refers to a manually input telephone number . • The mark G on the “TO” refers to a pre-programmed group. TX/RX FILE N ...

  • Oki 1145 MFP - page 134

    133 6 Mailbox/relay box report (Manually output) This is the report of the current status of the mailboxes. MAIL BOX BOX NO. BOX TYPE PGS FILE NO. DATE TIME FROM 11222 BULLETIN BD. 11231 CONFIDENTIAL 1 008 07.10 17:24 LOCAL MAILBOX/RELAY BOX REPORT TIME : 07-10-'05 18:00 FAX NO.1 : 2131234567 FAX NO.2 : 2131235678 NAME : Aaabbb L.A. RELAY BOX ...

  • Oki 1145 MFP - page 135

    134 6.PRINTING LISTS AND REPORTS 3.Lists/Reports Samples (Cont.) 6 Memory transmission repor t (Automatically output) After memory transmission has ended, this report is out put. A reduced image of t he fi rst page of the docu- ment transmitted is appended on the report. • This will be output "ON ERROR" or "AL W A YS". (  P ...

  • Oki 1145 MFP - page 136

    135 6 T ransmission report (Automatically output) After direct transmission has ended, this report is output. • This will be output "ON ERROR" or "AL W A YS". (  P .12 3 “Setting the communication report output”) • If an error occurs during dire ct transmission, the error code will be indicated on the “ST A TUS”. ...

  • Oki 1145 MFP - page 137

    136 6.PRINTING LISTS AND REPORTS 3.Lists/Reports Samples (Cont.) 6 Multi transmissi on report (Automatically output) After multi-address transmission has ended, this report is output. A reduced image of the first page of the document transmitted is appended on th e report. • This will be output "ON ERROR" or "AL W A YS". (  ...

  • Oki 1145 MFP - page 138

    137 6 Polling report (Automatically output) After multi-polling reception has ended, this report is output. • This will be output "ON ERROR" or "AL W A YS". (  P .12 3 “Setting the communication report output”) • The mark on the “F AX NUMBER” refers to a manually input telephone number . FILE NO. : 014 DATE : 07.1 ...

  • Oki 1145 MFP - page 139

    138 6.PRINTING LISTS AND REPORTS 3.Lists/Reports Samples (Cont.) 6 Mailbox reception report (Automatically output) This report is output when an o riginal is received in a confidential or bulletin board . Relay st ation report (A utomatically output) This report is output when an o riginal is received in a relay mailbox . FILE NO. : 016 DATE : 07.1 ...

  • Oki 1145 MFP - page 140

    139 6 Relay transmission originator term inal report (Automatically output) When this equi pment is setup as a relay originator , the report of the transmission to the relay stations is output. • This will be output "ON ERROR" or "AL W A YS". (  P .12 3 “Setting the communication report output”) • The mark on the “T ...

  • Oki 1145 MFP - page 141

    140 6.PRINTING LISTS AND REPORTS 3.Lists/Reports Samples (Cont.) 6 Relay transmission relay st atio n report (Automatically output) When this equi pment is setup as a relay station, the repo rt of the transmission to the relay destination s is output. A reduced image of the first page of th e document transmitted is append ed on the report. • Thi ...

  • Oki 1145 MFP - page 142

    141 6 Relay transmission end terminal report (Automatically output) When this equi pment is setup as a relay station, the repo rt of the transmission to the relay destination s is transferred to the desti nation regist ered. A reduced image of the first pa ge of the document transmi tted is appended on the report. • This will be output "ON E ...

  • Oki 1145 MFP - page 143

    142 6.PRINTING LISTS AND REPORTS 3.Lists/Reports Samples (Cont.) 6 Power failure list (A utomatically output) A list of the jobs which were erased will be output if there is so mething wro ng with the contents of the image memory when the main powe r switch is turned ON a fter a power failure during Fax commun ication. TX/RX FILE NO. FUNCTION 044 P ...

  • Oki 1145 MFP - page 144

    143 7 7. REGISTERING AND SETTING ITEMS 1. Setting the Initial T ransmission Mode ............... ................... ................... ....................... .... 144 2. Registering the T erminal ID .................. ................... ................... .................... ................... . 14 6 3. Setting the Reception Mode ........... ...

  • Oki 1145 MFP - page 145

    144 7.REGISTERING AND SETTING ITEMS 7 1. Setting the Initial T ransmission Mode Set the initial settings fo r the original transmission conditions and transmis sion type. When you send an original without chang ing the original conditions and tr ansmission mode settings, the original is sent with the initial setting values. • Resolution: ST ANDAR ...

  • Oki 1145 MFP - page 146

    145 7 3 Press the desired buttons for each item. • The screen below shows the default setting. • Press the [Next] or [Prev] button to switch the screens as requir ed. 4 Press the [ENTER] button. ...

  • Oki 1145 MFP - page 147

    146 7.REGISTERING AND SETTING ITEMS 7 2. Registering the T erminal ID If you register the ID name in advance, you can pr int sender informatio n on the leading edge of originals that are transmitted and receiver informatio n on the trailing edge of origi nals that are re ceived. • Deta ils to register : ID name (max. 20 characters) ID number (max ...

  • Oki 1145 MFP - page 148

    147 7 1 Press the [USER FUNCTIONS] but ton on the control panel. 2 Press the [ADMIN] button and th en the [P ASSWORD] button. 3 Enter the administrator p assword (6 to 10 digits), and then press the [ENTER] button. • Ask your administrator for the administrator password. 4 Press the [F AX] button. ...

  • Oki 1145 MFP - page 149

    148 7.REGISTERING AND SETTING ITEMS 2.Registering the T erminal ID (Cont.) 7 5 Press the [TERMINAL ID] button. 6 Press the [ID NAME] button and enter th e ID name in the letter entry screen (up to 20 characters). When you have finished entering the let- ters, press the [ENTER] button. • Entering letters, see the [Operat or's Manual for Basic ...

  • Oki 1145 MFP - page 150

    149 7 8 Press either the [YES] or [NO] but ton for adding the international code. If you add the international code (your country/re gion code) in advance, you can let the remote Fax know your country/region when comm unicating overseas. <Example> Registration by adding internati onal code in the terminal ID (2 34-567-8901). 9 Key in the term ...

  • Oki 1145 MFP - page 151

    150 7.REGISTERING AND SETTING ITEMS 2.Registering the T erminal ID (Cont.) 7 11 Check the settings. If they are co rrect, press the [ENTER] button to complete entry . • T o change the settings, press the [ID NAME], [F AX NUMBER] or [LINE2 NUMBER] button again. ...

  • Oki 1145 MFP - page 152

    151 7 3. Setting the Reception Mode Set reception mo de such as the volume settings and line -related item s. • Reception mode AUTO, MANUAL • Monitor tone volume Adjustable 0-7 steps (0: tone OFF) The “monitor tone” refers to the line monitor to ne when the [MONI TOR/P AUSE] button is pressed. • Reception completion tone volume Adjustable ...

  • Oki 1145 MFP - page 153

    152 7.REGISTERING AND SETTING ITEMS 3.Setting the Reception Mode (Con t.) 7 4 Press the [F AX] button. 5 Press the [INITIAL SETUP] button. 6 Press the desired buttons for each item. • Press the [Prev] or [Next] button to switch the screens. • The screen below shows the default settings. • With the monitor tone volume, you can adjust the volum ...

  • Oki 1145 MFP - page 154

    153 7 7 Press the [ENTER] button. • The registered items can be confirmed in the Administrator ’s Function List. T o print the list, see the [User Func- tions Guide]. There is no second screen to display the dial types for the European versio n. ...

  • Oki 1145 MFP - page 155

    154 7.REGISTERING AND SETTING ITEMS 7 4. 2nd Line Board (optional) Inst allation Installing the 2nd line board (option) all ows simult aneous dual communications of transmi ssion/reception like transmission during reception and reception during transmission. When the 2n d line is used, the fol- lowing function setting a nd registration are required ...

  • Oki 1145 MFP - page 156

    155 7 4 Press the [F AX] button. 5 Press the [INITIAL SETUP] button. 6 Select either of the [DP] or [MF] buttons for the dial type (line 2) set- ting • Press the [Next] or [Prev] button to switch the screens as requir ed. • DP , MF . (  P .151 “3.Setting the Reception Mode”) 7 Press the [ENTER] button. ...

  • Oki 1145 MFP - page 157

    156 7.REGISTERING AND SETTING ITEMS 4.2nd Line Board (o ptional) Installation (Cont.) 7 2nd line setting When the optional 2nd line board is installed, its oper ation can be selected using the following procedure: • T ransmission/Recept ion Both transmission and reception are available all the time. • Reception only (24 hou rs) The 2nd line is ...

  • Oki 1145 MFP - page 158

    157 7 4 Press the [F AX] button. 5 Press the [LINE-2 MODE] button. ...

  • Oki 1145 MFP - page 159

    158 7.REGISTERING AND SETTING ITEMS 4.2nd Line Board (o ptional) Installation (Cont.) 7 T ransmission and reception (TX/RX) 6 Press the [TX/RX] button. 7 Press the [ENTER] button. Reception only (24HR) 6 Press the [RX ONL Y (24HR)] button. 7 Press the [ENTER] button. ...

  • Oki 1145 MFP - page 160

    159 7 Reception only (TIMER) 6 Press the [RX ONL Y (TIMER)] button. • Key in the ST AR T time and END time. • Press the [ ] or [ ] button to move the cursor. • T ime is displayed in the 24-hour system. 7 Press the [ENTER] button. ...

  • Oki 1145 MFP - page 161

    160 7.REGISTERING AND SETTING ITEMS 7 5. Setting RX Printing Setting RX printing Set print settings for originals received on the Fax that are to be printed. 2 print i nstallations are available: discard printing an d RX reduction printing. • Discard Printing ON (default setting): When originals are up to 10 mm large r than the prin ting area; th ...

  • Oki 1145 MFP - page 162

    161 7 3 Enter the administrator p assword (6 to 10 digits), and then press the [ENTER] button. • Ask your administrator for the administrator password. 4 Press the [F AX] button. 5 Press the [RX PRINT] button. ...

  • Oki 1145 MFP - page 163

    162 7.REGISTERING AND SETTING ITEMS 5.Setting RX Printing (Cont.) 7 6 Press the [ON] or [OFF] button of the [DISCARD] and/or [REDUC- TION], and then the [ENTER] button. • The registered items can be confirmed in the Administrator ’s Function List. T o print the list, see the [User Func- tions Guide]. ...

  • Oki 1145 MFP - page 164

    163 7 Setting duplex printing This printer setting determine s whether or not to print received F axes on both sides of the paper available for Fax reception. • Duplex printing is available only if the received original sizes and resolution are the same. • When the paper has run out during duple x printing, th e rest of the documen t is printed ...

  • Oki 1145 MFP - page 165

    164 7.REGISTERING AND SETTING ITEMS 5.Setting RX Printing (Cont.) 7 4 Press the [F AX] button. 5 Press the [RX PRINT] button. 6 Press the [ON] button for the duplex pr int function, and then press the [ENTER] button. • The registered items can be confirmed in the Administrator ’s Function List. T o print the list, see the [User Func- tions Guid ...

  • Oki 1145 MFP - page 166

    165 7 Duplex printing direction differs depending on the received original size. 1. Received LD, LG , L T , A3, A4, or B4-sized originals ar e printed so that they can be bound along the long edge of direction. 2. Received ST , A5 or B5-sized originals are printed so that they can be bound along the short edge of direction. Even when “Duplex Prin ...

  • Oki 1145 MFP - page 167

    166 7.REGISTERING AND SETTING ITEMS 5.Setting RX Printing (Cont.) 7 Setting the rot ate sort (Alternation) This printer setting d etermines whether or not to outpu t each se parate Fax job by rotated sort (90 degrees) alternately . * Rotate Sort is available only for L T /A4-sized paper . Set the L T and L T -R, or A4 and A4-R drawers. * If paper b ...

  • Oki 1145 MFP - page 168

    167 7 5 Press the [RX PRINT] button. 6 Press the [ON] button for the rotate sort function, and then press the [ENTER] button. • The registered items can be confirmed in the Administrator ’s Function List. T o print the list, see the [User Func- tions Guide]. ...

  • Oki 1145 MFP - page 169

    168 7.REGISTERING AND SETTING ITEMS 7 6. Setting Recovery T ransmission Setting the document-holding-time for retaining a document in memory using the Recove ry T ran smission function. 1 Press the [USER FUNCTIONS] but ton on the control panel. 2 Press the [ADMIN] button and th en the [P ASSWORD] button. 3 Enter the administrator p assword (6 to 10 ...

  • Oki 1145 MFP - page 170

    169 7 5 Press the [RECOVER Y TX] button. 6 Change the document-stored time wi th the [ 1H] or [24H ] button, and press the [ENTER] button. • The document-holding time can be changed in 1 hour increments. ...

  • Oki 1145 MFP - page 171

    7 170 7.REGISTERING AND SETTING ITEMS ...

  • Oki 1145 MFP - page 172

    171 8 8. TROUBLESHOOTING 1. When The Following Messages Appear .............. ...................... .................... ................... . 172 2. T rans mission T rouble .......... ................. ................ ................ ................ ................ .............. 173 3. Reception T r ouble ............ ................ ...... ...

  • Oki 1145 MFP - page 173

    172 8.TROUBLESHOOTING 8 1. When The Following Messages Appear When the fo llowing messages appea r on the touch p anel, press the [FUNCTION CLEAR] button to clear the error message and perform the ap propriate remedy for the error . For details of messages not listed below , see the [Operator ’s Manual for Basic Functions]. Message Caus e Remedy ...

  • Oki 1145 MFP - page 174

    173 8 2. T ransmission T rouble Check the following points if you are having trouble sending do cuments. If you cannot rectify the p roblem wit h the points below , or the problem is not listed below , call service for assistance. T rouble Check Point “TRANSMIT” is not displayed even if the [ST AR T] button is pressed. • Did you replace the h ...

  • Oki 1145 MFP - page 175

    174 8.TROUBLESHOOTING 8 3. Reception T rouble Check the following poi nts if you are having trouble receiving documents.If you cannot rectify the problem with the points below , or the problem not listed below , call servi ce for assistance. T rouble Check Point Originals cannot be received even if “RECEIVE” is displayed and the [ST AR T ] butt ...

  • Oki 1145 MFP - page 176

    175 9 9. SPECIFICA TIONS 1. Main S pecifications . ................ ................ ................ ................ ................ .................... ..... .. 176 ...

  • Oki 1145 MFP - page 177

    176 9.SPECIFICATIONS 9 1. Main S pecifications *1 For hard drives, MB means 1 million bytes. (T otal hard drive accessible capacity may vary depending on operating environme nt.) When the total time that the power is turned off for 12 hours a day becomes about 5 years, the battery will be dead. If the battery is run down, ask your servic e technici ...

Manufacturer Oki Category All in One Printer

Documents that we receive from a manufacturer of a Oki 1145 MFP can be divided into several groups. They are, among others:
- Oki technical drawings
- 1145 MFP manuals
- Oki product data sheets
- information booklets
- or energy labels Oki 1145 MFP
All of them are important, but the most important information from the point of view of use of the device are in the user manual Oki 1145 MFP.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Oki 1145 MFP, service manual, brief instructions and user manuals Oki 1145 MFP. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Oki 1145 MFP.

Similar manuals

A complete manual for the device Oki 1145 MFP, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Oki 1145 MFP by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Oki 1145 MFP.

A complete Oki manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Oki 1145 MFP - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Oki 1145 MFP, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Oki 1145 MFP, that we can find in the current document
3. Tips how to use the basic functions of the device Oki 1145 MFP - which should help us in our first steps of using Oki 1145 MFP
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Oki 1145 MFP
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Oki 1145 MFP in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Oki 1145 MFP?

Use the form below

If you did not solve your problem by using a manual Oki 1145 MFP, ask a question using the form below. If a user had a similar problem with Oki 1145 MFP it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)