Manual EAW DX8

36 pages 3.08 mb
Download

Go to site of 36

Summary
  • EAW DX8 - page 1

    DX 8 OL 2 4 7 10 15 20 25 30 35 40 50 OL 2 4 7 10 15 20 25 30 35 40 50 OL 2 4 7 10 15 20 25 30 35 40 50 OL 2 4 7 10 15 20 25 30 35 40 50 OL 2 4 7 10 15 20 25 30 35 40 50 OL 2 4 7 10 15 20 25 30 35 40 50 OL 2 4 7 10 15 20 25 30 35 40 50 12 15 9 6 3 0 3 6 9 12 15 2 OL 4 7 10 15 20 25 30 35 40 50 A B LOCK MODE POWER COMM PORT 1 2 3 4 5 6 7 8 HI LO EQ ...

  • EAW DX8 - page 2

    2 – DX8 1. SAFETY INSTRUCTIONS 1. Read Instructions — Read all the safety and operation instructions before operating the DX8. 2. Retain Instructions — The safety and operating instructions should be kept for future reference. 3. HEED ALL W ARNINGS — Follow all warnings on the DX8 and in these operating instructions. 4. FOLLOW ALL INSTRUCTI ...

  • EAW DX8 - page 3

    DX8 – 3 2. INTRODUCTION The DX8 is a DSP-based digital audio mixer and signal processor designed for use in a variety of installations such as churches, courtrooms, convention centers, and hotels. It provides eight universal inputs and two balanced outputs allowing true 8x2 mixing for stereo or dual-zone applications. The DX8 includes powerful si ...

  • EAW DX8 - page 4

    4 – DX8 OL 2 4 7 10 15 20 25 30 35 40 50 OL 2 4 7 10 15 20 25 30 35 40 50 OL 2 4 7 10 15 20 25 30 35 40 50 OL 2 4 7 10 15 20 25 30 35 40 50 OL 2 4 7 10 15 20 25 30 35 40 50 OL 2 4 7 10 15 20 25 30 35 40 50 OL 2 4 7 10 15 20 25 30 35 40 50 12 15 9 6 3 0 3 6 9 12 15 2 OL 4 7 10 15 20 25 30 35 40 50 1 2 3 4 5 6 7 8 HI LO EQ A MASTE TRIM BUS A U +20 ...

  • EAW DX8 - page 5

    DX8 – 5 2 OL 4 7 10 15 20 25 30 35 40 50 A B LOCK MODE POWER COMM PORT B A MASTER DX8 DIGIT AL MIXER B REMOTE BUS A RECORD A B OUTPUTS LOGIC I/O TRIM 8 M I C G A I N 0 60 T URING DA TE COMM PORT 12345678 LINE MIC - 30dB +30dB U N 0 0 dB PHANTOM POWER 48V DC 12 1 +5V 11 G1 G + – G + – G + – INPUTS OUTPUTS ON MODE This switch changes the fron ...

  • EAW DX8 - page 6

    6 – DX8 B REMOTE BUS TRIM BUS A U +20 -20 A TRIM 1 RECORD A B OUTPUTS LOGIC I/O TRIM BUS B U +20 -20 TRIM 2 TRIM 3 TRIM 4 TRIM 5 TRIM 6 TRIM 7 TRIM 8 M I C G A I N 0 60 – + SERIAL NUMBER MANUFA CTURING DA TE COMM PORT DIRECT OUTPUTS 12345678 POWER INPUT 22 - 28V DC, 3A MAX 2345678 1 – + G G + – MIC LINE LINE LINE LINE MIC LINE MIC LINE MIC ...

  • EAW DX8 - page 7

    DX8 – 7 3. INST ALLA TION APPLICA TION DIAGRAMS B REMOTE BUS TRIM BUS A U +20 -20 A TRIM 1 RECORD AB OUTPUTS LOGIC I/O TRIM BUS B U +20 -20 TRIM 2 TRIM 3 TRIM 4 TRIM 5 TRIM 6 TRIM 7 TRIM 8 M I C G A I N 06 0 – + SERIAL NUMBER MANUFA CTURING DA TE COMM PORT DIRECT OUTPUTS 12345678 POWER INPUT 22 - 28V DC, 3A MA X 2345678 1 – + G G + – MIC LI ...

  • EAW DX8 - page 8

    8 – DX8 B REMOTE BUS TRIM BUS A U +20 -20 A TRIM 1 RECORD AB OUTPUTS LOGIC I/O TRIM BUS B U +20 -20 TRIM 2 TRIM 3 TRIM 4 TRIM 5 TRIM 6 TRIM 7 TRIM 8 M I C G A I N 06 0 – + SERIAL NUMBER MANUFA CTURING DATE COMM PORT DIRECT OUTPUTS 12345678 POWER INPUT 22 - 28V DC, 3A M AX 2345678 1 – + G G + – MIC LINE LINE LINE LINE MIC LINE MIC LINE MIC L ...

  • EAW DX8 - page 9

    DX8 – 9 B REMOTE BUS TRIM BUS A U +20 -20 A TRIM 1 RECORD AB OUTPUTS LOGIC I/O TRIM BUS B U +20 -20 TRIM 2 TRIM 3 TRIM 4 TRIM 5 TRIM 6 TRIM 7 TRIM 8 M I C G A I N 06 0 – + SERIAL NUMBER MANUFACTURING D ATE COMM PORT DIRECT OUTPUTS 12345678 POWER INPUT 22 - 28V DC, 3A MAX 2345678 1 – + G G + – MIC LINE LINE LINE LINE MIC LINE MIC LINE MIC LI ...

  • EAW DX8 - page 10

    10 – DX8 B REMOTE BUS TRIM BUS A U +20 -20 A TRIM 1 RECORD AB OUTPUTS LOGIC I/O TRIM BUS B U +20 -20 TRIM 2 TRIM 3 TRIM 4 TRIM 5 TRIM 6 TRIM 7 TRIM 8 M I C G A I N 06 0 – + SERIAL NUMBER MANUFACTURING DATE COMM PORT DIRECT OUTPUTS 12345678 POWER INPUT 22 - 28V DC, 3A MAX 2345678 1 – + G G + – MIC LINE LINE LINE LINE MIC LINE MIC LINE MIC LI ...

  • EAW DX8 - page 11

    DX8 – 11 Application Diagrams A: T ypical Stereo Application This diagram depicts a simple setup, using the DX8 in a stereo application. A microphone is connected to the MIC input on channel 1 for paging purposes, and several program sources are connected to the LINE inputs on channels 3 through 8. B: T ypical T wo-Zone Application This configura ...

  • EAW DX8 - page 12

    12 – DX8 CONNECTIONS Connecting Balanced Sources Use high-quality three-conductor cable for balanced connections, such as Star Quad by Belden, Canare, Mogami, etc. The better the shield, the better the audio signal is protected from induced EMI and RFI. Note: With screw-down connectors, it's best to use stranded wire that is not tinned. Sold ...

  • EAW DX8 - page 13

    DX8 – 13 Strip the wire back about 1/4" inch, insert the wire as far as it will go into the appropriate hole in the supplied Phoenix-type connector , and tighten down the screw with a small slot-head screwdriver . It is recommended that you use 20 or 22 gauge wire with the Phoenix-type connectors. The OUTPUT connectors are wired as follows: ...

  • EAW DX8 - page 14

    14 – DX8 4. OPERA TION Set the Levels MIC and LINE Input T rim The analog trim controls on the rear panel are not adjustable via the control software since these are in the analog domain, prior to the A/D converters. T o adjust the MIC and LINE TRIM controls: 1. Start the program source playback for Input 1 or , if a microphone is connected, have ...

  • EAW DX8 - page 15

    DX8 – 15 Bus A and B Input T rim There is no metering after the BUS A and B input TRIM controls. These controls must be adjusted by ear . Start the program source playback for all sources connected to the BUS A or BUS B input. Slowly increase the TRIM control to the center position (12 o'clock), which is unity gain. Then adjust the TRIM cont ...

  • EAW DX8 - page 16

    16 – DX8 DIRECT OUTPUTS The DIRECT OUTPUTS provide an unbalanced line- level signal from each of the 8 Input channels. This signal comes from the output of the preamplifier stage on each input channel, prior to the A/D converter and subsequent digital signal processing. Use the DIRECT OUTPUTS to connect a continuous music source (e.g., satellite ...

  • EAW DX8 - page 17

    DX8 – 17 The logic functions assigned to each individual logic input and output are configured using the DX8- PC application. In addition, each logic input and output can be assigned a descriptive name (up to 32 characters) for easier identification within the PC application. Note: Logic I/O functions are set from the PC application o n ly . Logi ...

  • EAW DX8 - page 18

    18 – DX8 4. T ype <drive>:DX8-PCSetup in the command line (where <drive> is the letter assigned to the CD drive, i.e., D drive, or the location on your hard drive where the file was downloaded). 5. Setup will install the DX8-PC application onto your PC. Y ou can accept the default directory , or specify a different location to insta ...

  • EAW DX8 - page 19

    DX8 – 19 OVERVIEW The DX8-PC software application provides real-time control and configuration editing for the DX8 using a laptop or other PC-compatible computer . In addition to input and output level control and output EQ gain control, which is available on the front panel, the DX8-PC application provides control over each individual channel EQ ...

  • EAW DX8 - page 20

    20 – DX8 Advanced DX8 Unit Info This opens a dialog box that contains the following information about the DX8 that is currently connected: Firmware Upgrade This allows you to select an OS Upgrade File to upload to the DX8 as they become available. Click on the Select File button in the Firmware Upgrade window and the Select OS Upgrade File window ...

  • EAW DX8 - page 21

    DX8 – 21 Windows About This provides information about the DX8-PC software application, including the version and personnel credits. Close Window (ESC) This closes the window that is currently selected (front-most) on-screen. Close All (Ctrl+/) This closes all windows that are currently open on the screen, leaving just the main window open. Graph ...

  • EAW DX8 - page 22

    22 – DX8 Presets The DX8 stores up to 16 presets, which can be recalled via the Presets drop-down box. Select a preset in the drop-down box and the settings are instantly recalled from the DX8 memory . Save T o Preset Click this button to save the current mixer settings on the DX8 to a preset. The "Save T o Preset" window opens. Enter a ...

  • EAW DX8 - page 23

    DX8 – 23 BUTTONS Views These four buttons open the Graphic EQ, Parametric EQ, Output Compressor , and Automix views, overlaid across the input section. Graphic EQ Click this button to open the 31-Band Graphic Equalizer window for the A and B outputs. Click and drag on a slider knob to adjust the EQ. The selected band ’ s GAIN and BAND (frequenc ...

  • EAW DX8 - page 24

    24 – DX8 Compress • Ratio: This determines the change in output level as a function of the change in input level, once the threshold has been exceeded. It is calibrated in decibels, with a range from 1:1 (off) to 20:1. Thus, if it is set to 10:1, an increase in input level of 10 dB (assuming the input is above the threshold level), results in a ...

  • EAW DX8 - page 25

    DX8 – 25 Each individual channel is attenuated by an amount, in dB, equal to the difference, in dB, between that channel ’ s level and the sum of all the channel levels. This keeps the overall system gain constant, and allows the system to deliver maximum acoustic gain without feedback. There are three parts to the automixing feature in the DX8 ...

  • EAW DX8 - page 26

    26 – DX8 Use a control group to adjust the volume of two or more channels at the same time. All faders that are assigned to a control group will have their gain settings modified by the amount the control group fader is increased or decreased. For example, a control group might be used to adjust the overall volume for all the choir mics in a chur ...

  • EAW DX8 - page 27

    DX8 – 27 Action Definitions Momentary means that the logic function is active as long as the Logic Input is held active. When the Logic Input is inactive, the logic function is inactive. Latch On means that the logic function is active and stays active once the Logic Input changes from inactive to active (logic high to logic low). Changing the Lo ...

  • EAW DX8 - page 28

    28 – DX8 Mid Peaking EQ These two knobs control the gain ( ± 15 dB) and the center frequency (20Hz-20kHz) of the channel mid- frequency peaking EQ. Click and drag up or down to increase or decrease the settings of these controls. The actual settings are displayed in the two boxes above the knobs. Low Shelf EQ These two knobs control the gain ( ? ...

  • EAW DX8 - page 29

    DX8 – 29 Output Strip Meter The output meter indicates the output signal level just after the output gain control and just prior to the D/A converter stage. These meters indicate the signal level in real time relative to maximum output level (+18 dBu) and follow the meters on the front panel, with the exception that they don't indicate gain ...

  • EAW DX8 - page 30

    30 – DX8 DIRECT OUTPUT CHANNEL 1 32-BIT DSP CHANNELS 2-8 (IDENTICAL TO CH 1) INPUT METER INTERNAL DIGITAL BUSES ADC 24-BIT PHANTOM POWER +48 VDC DAC 24-BIT 31-BAND GRAPHIC EQ 5-BAND PARAMETRIC EQ MUTE ALC AUTO ALC AUTO A B TRIM +5V PC OR OTHER CONTROL DEVICE (OPTIONAL) PC OR OTHER CONTROL DEVICE (OPTIONAL) REMOTE CONTROL (OPTIONAL) DX8 OR eNET16 ...

  • EAW DX8 - page 31

    DX8 – 31 DX8 SPECIFICA TIONS INPUTS / OUTPUTS Inputs 1-8: Balanced, Phoenix-type terminals Bus A and B: Balanced, Phoenix-type terminals, Direct to Mix Buses Master Outputs: Balanced, Phoenix-type terminals Record Outputs A/B: Unbalanced, RCA Direct Outputs 1-8: Unbalanced on DB15 (bottom row is signal return) Logic Inputs: 10 Inputs on DB25 Seri ...

  • EAW DX8 - page 32

    32 – DX8 DX8 DIGITAL MIXER DX 8 Crosstalk (1kHz relative to 0 dBu, 20Hz-20kHz bandwidth, any line input to adjacent Direct Out): T rim to unity: < – 90 dB Frequency Response Mic input to any output: 20Hz – 20kHz, ± 0.5 dB Equivalent Input Noise (EIN) Mic in to Direct out, max gain, 150 ohm termination: – 129.5 dBm unweighted Common Mode ...

  • EAW DX8 - page 33

    DX8 – 33 DISCLAIMER EA W Commercial continually engages in research related to product improvement, new materials, and production methods. Design refinements are introduced into existing products without notice as a routine expression of that philosophy . For this reason, any current EA W Commercial product may differ in some respect from its pub ...

  • EAW DX8 - page 34

    34 – DX8 Appendix B: Logic Output Functions Logic Output Function Parameter Condition Inactive None None Inp Sig Present Input 1-8 Input Signal > – 40 dB Out Sig Present Output A Output A Signal > – 40 dB Output B Output B Signal > – 40 dB Input Chan Open Input 1-8 Input Gain > – 40 dB Output Chan Open Output A Output A Signal ...

  • EAW DX8 - page 35

    DX8 – 35 DX-SW4 Remote Switch Control (4-button/4-LED) Switch Positions ID 1 through 8 Function Control 1 Control 2 Control 3 Control 4 0 00000000 Mute Input 1-4 (1) Mute Input 1 Mute Input 2 Mute Input 3 Mute Input 4 1 10000000 Mute Input 1-4 (2) Mute Input 1 Mute Input 2 Mute Input 3 Mute Input 4 2 01000000 Mute Input 5-8 (1) Mute Input 5 Mute ...

  • EAW DX8 - page 36

    EA W Commercial A LOUD T echnologies Inc. Company EAW Commercial | Bldg 11 | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404 TEL outside US 425.892.6503 | F AX 425.485.1152 | www .eawcommercial.com © 2004 LOUD T echnologies Inc. All Rights Reserved. ...

Manufacturer EAW Category Music Mixer

Documents that we receive from a manufacturer of a EAW DX8 can be divided into several groups. They are, among others:
- EAW technical drawings
- DX8 manuals
- EAW product data sheets
- information booklets
- or energy labels EAW DX8
All of them are important, but the most important information from the point of view of use of the device are in the user manual EAW DX8.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals EAW DX8, service manual, brief instructions and user manuals EAW DX8. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product EAW DX8.

Similar manuals

A complete manual for the device EAW DX8, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use EAW DX8 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of EAW DX8.

A complete EAW manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual EAW DX8 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the EAW DX8, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the EAW DX8, that we can find in the current document
3. Tips how to use the basic functions of the device EAW DX8 - which should help us in our first steps of using EAW DX8
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with EAW DX8
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of EAW DX8 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning EAW DX8?

Use the form below

If you did not solve your problem by using a manual EAW DX8, ask a question using the form below. If a user had a similar problem with EAW DX8 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)