English dropdown-ico

Manual Haier HMS 800 TVE

30 pages Not applicable
Download

Go to site of 30

Summary
  • Haier HMS 800 TVE - page 1

    MODEL ： HMS800TVE FRONT LOADING W ASHING MACHINE Service Manual Suited model: HMS700TVE Features ： ● 300mm diameter porthole, door may be open at a 180 degrees. ● Multi-gear speed controller ● Unique gasket design featuring no residual water hidden inside ● Delay time adjustive Haier Gr oup MANUAL CODE ： N o . 1 ● Washing Programs-1 ...

  • Haier HMS 800 TVE - page 2

    1 1 、 Content s--------------------------------------- -------------------------------------------------1 2 、 Product code illumination and series introduction-----------------------------------2 3 、 Features ---------------------------------------------------------------------------------------3 4 、 S pecification ------------------------- ...

  • Haier HMS 800 TVE - page 3

    2 Model code rule description Model identification ： HMS 800 T V E A B C D E A ： Serial code B ： Max spin speed C ： T emprature adjustive D ： E ： S pin speed adjustive Computer control Examples ： HMS800TVE It represents HK series appearance ， with big window 、 180 ° opening window 、 800rpm spin speed.S pin speed is adjustive fr ...

  • Haier HMS 800 TVE - page 4

    3 ● 300mm diameter porthole, door may be open at a 180 degrees. Facilitate view of wash process, facilit ate unloading and easy to use with large port. ● Multi-gear speed controller According to different costuming ， you can slect corresponding spin speed ， from 0 to 800 rpm. ● Unique gasket design featuring no residual water hidden insid ...

  • Haier HMS 800 TVE - page 5

    ４ Proposal 2004 New Sensor Front loaders w ashing machines 　 HMS800TVE Brand position center upper frame of door / chromed sticker HMS700TVE Model number serigraphy right top corner control panel On white: silver / On silver : black or dark grey 1. Product identification 　 　 Description of appliance 　 W ashing machine T ype of appliance ( ...

  • Haier HMS 800 TVE - page 6

    ５ Delay timer (from - to) h 0.5-24 Self cleaning suds pump 　 W ater inlet hose cold water / hot water 　 W ater drain hose / -support 　 / Adjustable feet n° 4 4. Safety sy stems 　 Auto door lock ADL Motor overheating protection MOP No heating without water NHW Auto water cool-down (before drain 90°C boiled water) AWC W ater return protec ...

  • Haier HMS 800 TVE - page 7

    　 6 Matters Needing Attention ●　Ｓａｆｅｔｙ １． . A separate earthed socket is required for the power supply . The washing machine must be positioned so that the plug is accessible. 2. Hold the plug and not the electric cable when unplugging the washing machine. 3.Fuses in the power circuit should be rated for 15A. If the supply cor ...

  • Haier HMS 800 TVE - page 8

    7 9 . T h e c a r p e t m u s t n o t o b s t r u c t t h e v e n t i l a t i o n o p e n i n g s i n t h e b a s e o f t h e w a s h i n g m a c h i n e . ８ . T h e w a s h i n g m a c h i n e s h o u l d n o t b e i n s t a l l - e d o u t d o o r s o r i n a d a m p p l a c e . I n t h e e v e n t o f w a t e r l e a k a g e o r s p l a s h e ...

  • Haier HMS 800 TVE - page 9

    8 　 3. Do not place heavy , heating source or wet articles on the top of the washing machine. 4. Do not hot wash foam rubber or sponge-like materials. 6. Do not open the detergent distribution drawer during the wash cycle.. 　 7. The door is fitted with a self-lock device and will not open until 2~3 minutes after the washing machine stops. Do no ...

  • Haier HMS 800 TVE - page 10

    9 ● Ｒｅｍｏｖｅ　ａｌｌ　ｔｈｅ　ｐａｃｋｉｎｇ　ｍａｔｅｒｉａｌｓ　（ｉｎｃｌｕｄｉｎｇ　ｔｈｅ　ｆｏａｍ　ｂａｓｅ）　 　　ｔｏ　ｐｒｅｖｅｎｔ　ｖｉｂｒａｔｉｏｎ　ｄｕｒｉｎｇ　ｕｓｅ，　ａｓ　ｓｈｏｗｎ　ｉｎ　Ｆｉｇ．　１．　? ...

  • Haier HMS 800 TVE - page 11

    10 １００ｃｍ ８０ｃｍ 　　　　 The height of the drainage outlet must be 80-100cm. T o prevent the drainage hose from dropping off, fix it to the drainage hose clip at the back of the washing machine. B e f o r e c o n n e c t i n g t o t h e p o w e r s u p p l y , c h e c k : 　 　 　 　 　 　 　 Joining the Inlet Hose to the ...

  • Haier HMS 800 TVE - page 12

    11 　　 　 　 　 　 　 　 　 　 　 　 　 height: 860mm / width: 595mm / depth: 485mm Front Load Washer HMS800TVE 595 860 485 ...

  • Haier HMS 800 TVE - page 13

    12 T op handle Progtam selector Detergent dispenser Door Porthole Button Power supply cable Earth terminal Back plate screw(3) Drain hose Drain hose clip Ｐａｃｋｉｎｇ　ｂｌｏｔ（４） Back plate Bottom plaque Front Load Washer HMS800TVE ...

  • Haier HMS 800 TVE - page 14

    13 C o n t r o l P a n e l E: W ashing temperature button T ouch this button lightly , the washing temperature will be displayed on the screen. Select a temperature according to the type of laundry .  W ash programming knob By turning the knob clockwise/counterclockwise, the required program can be selected. There are 1 1 programs available. ...

  • Haier HMS 800 TVE - page 15

    14 G: Detergent distribution drawer Open the drawer , three compartments can be seen: Compartment 1: Pre-wash detergent Compartment 2: Normal - Quick wash detergent Compartment 3: Softener , conditioning agent, perfume, etc.  F: Delay Button T ouch this button lightly , the washing machine will start operation after a period of time and the corr ...

  • Haier HMS 800 TVE - page 16

    15 Guide to Operational Program Selection ８００ ８００ ８００ ６００ ８００ ２：３４ ２：１６ ３ １：３０ ０：５８ ０：５８ ０：５５ ０：２９ ０：５３ ０：２７ ０：１３ ０：０３ Delay ８００ ８ Program Detergent Compartment Y es Y es Y es Y es Y es Y es Y es Y es Y es Y es Y es Ironin ...

  • Haier HMS 800 TVE - page 17

    16 1. Control panel lock function: T o prevent children from accidentally starting the machine, the control panel can be locked by pressing the "T emp" and "Delay" buttons at the same time. After the panel is locked, the sign "LOCK" and the wash time are displayed alternately and all the keys are inactivated. Press the ...

  • Haier HMS 800 TVE - page 18

    17 I .The appliance does not work. P ossible causes 1.The socket is not the required one or the connection is loose. 2.The door is not properly closed or the switch of micro delay is in poor contact. 3.The plug wire of motor is in poor contact or the motor is broken. 4.Malfunction of PCB T roubleshooting 1.Check the socket and plug to make sure tha ...

  • Haier HMS 800 TVE - page 19

    18 water dr ainage outlet should be from 80 to100cm. 2).Check whether the program is properly selected. 3).Connect the power cable to the dr ainage pump to check whether the operation is normal. If not, make necessary replacement. IV .Unusual noise P ossible causes 1.The packing screws should be disassembled. 2.The washer is placed too near a w all ...

  • Haier HMS 800 TVE - page 20

    19 P ossible causes 1.Gas leakage at pressure system of water supply . 2.The pressure switch is broken. T roubleshooting 1.Check whether the pipeline of pressure system is block ed or there is gas leakage. The pressure system includes: (1) Gas-collecting valve (2) Rubber pipe (3) Pipe clip2.Blow on the pressure switch and "click, click" c ...

  • Haier HMS 800 TVE - page 21

    20 8).Dispenser 9)Condenser 10) Hose connecting condenser to hose of outer cylinder 2.Fasting the U-bolt. 3.Wipe off the foreign object from the cushion of sight window . IX .Improper distribution of dispenser P ossible causes 1.The plug wire of the water eletromagnetic valve is mistaked. 2.The PCB is broken. 3.F ault of assemblage of dispenser. T ...

  • Haier HMS 800 TVE - page 22

    21 XII.Control panel display Err message T roubleshooting 1.Reference user manual,finding the cause of Err message. 2.Following the instructions of the user manual,chenk the washing machine .if not , replace relating element. Front Load Washer HMS800TVE ...

  • Haier HMS 800 TVE - page 23

    22 Wiring Circuit Ｎ Ｇ Ｌ F A Switch P Heat NTC PCB Motor EVP MR N C L PCB-Printed Circuit Board F A-Interference Suppresser Switch-Power Swittch P-Pressure Switch Heat-Heating element NTC-T emperature Sensor MR-Door Lock EVP ,EVF-W ater Inlet Magnetic V alve PS-Drainage Pump Motor-Motor EVF PS Front Load Washer HMS800TVE ...

  • Haier HMS 800 TVE - page 24

    23 Exploded view 1 4 3 5 6 7 10 1 1 19 38 20 37 27 21 28 36 31 30 26 35 34 33 24 32 2 8 9 12 13 14 １５ 16 17 18 22 23 25 29 Front Load Washer HMS800TVE ...

  • Haier HMS 800 TVE - page 25

    Num b e r S p e c ia l c o de Na m e o f pa r t QT Y U n it Re m a r k １ ０ ０ ２ ０ ２ ０ ２ ０ ５ ８ T op c ove r １ ＥＡ ● ２ ０ ０ ２ １ ８ ２ ３ ０ ７ ０ ０ ６ １ １ A bl e c l a m p ４ ＥＡ ３ ０ ０ ２ １ ６ ０ ０ ０ ４ ８ ６ １ ０ ２ W a t er e l e c t roma g net ic １ ＥＡ ● ４ ０ ０ ...

  • Haier HMS 800 TVE - page 26

    25 ４０ ４１ ４２ ４３ ４４ ４５ ４６ ４７ ４８ ４９ ５１ ５０ ５２ ５４ ５３ ５５ ５６ ５７ ５８ ５９ ６０ ６１ ６２ ６３ ６４ ６５ ６７ ６６ ６８ ６９ ７０ ７１ ７２ ７４ ７５ ７７ ７８ ３９ ７６ ７３ Front Load Washer HMS800TVE ...

  • Haier HMS 800 TVE - page 27

    26 F ront t ig ht eni ng ring of cushion of s i g ht w i ndow １ ＥＡ ４ ０ ０ ０ ２ ０ ３ ０ ０ ３ ９ ３ Cus hi on of s ig ht window １ ＥＡ ● ４ １ ０ ０ ２ ０ ６ ０ ０ ０ ６ ３ Ba c k t ig ht eni ng ring of cushion of s i g ht w i ndow １ ＥＡ ４ ２ ０ ０ ２ ０ ３ ０ ０ ４ ２ ２ F ront bal anc e １ ...

  • Haier HMS 800 TVE - page 28

    27 Sincere Forever Haier Gr oup T el:86-532-8939999 W eb site:http://www .haier .com Front Load Washer HMS800TVE ...

  • Haier HMS 800 TVE - page 29

    HAIER Front Load W asher HMS800TVE ...

  • Haier HMS 800 TVE - page 30

    HAIER Front Load W asher HMS800TVE ...

Manufacturer Haier Category Washing Machine

Documents that we receive from a manufacturer of a Haier HMS 800 TVE can be divided into several groups. They are, among others:
- Haier technical drawings
- HMS 800 TVE manuals
- Haier product data sheets
- information booklets
- or energy labels Haier HMS 800 TVE
All of them are important, but the most important information from the point of view of use of the device are in the user manual Haier HMS 800 TVE.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Haier HMS 800 TVE, service manual, brief instructions and user manuals Haier HMS 800 TVE. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Haier HMS 800 TVE.

Similar manuals

A complete manual for the device Haier HMS 800 TVE, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Haier HMS 800 TVE by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Haier HMS 800 TVE.

A complete Haier manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Haier HMS 800 TVE - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Haier HMS 800 TVE, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Haier HMS 800 TVE, that we can find in the current document
3. Tips how to use the basic functions of the device Haier HMS 800 TVE - which should help us in our first steps of using Haier HMS 800 TVE
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Haier HMS 800 TVE
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Haier HMS 800 TVE in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Haier HMS 800 TVE?

Use the form below

If you did not solve your problem by using a manual Haier HMS 800 TVE, ask a question using the form below. If a user had a similar problem with Haier HMS 800 TVE it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)