English dropdown-ico

Manual Emerson 00809-0100-4102

154 pages 6.05 mb
Download

Go to site of 154

Summary
  • Emerson 00809-0100-4102 - page 1

    Reference Manual 00809-0100-4102, Rev AA May 2013 R osemount 2051 Wireless Pre ssure T ransmitters Pressure , Le v el, and Flow Solutions with WirelessHART™ Prot ocol ...

  • Emerson 00809-0100-4102 - page 2

    ...

  • Emerson 00809-0100-4102 - page 3

    i Reference Manu al 00809-0100-4102, Rev AA R osemount 2051 Wireless Pressure , Flow , and Lev el Solutions Re ad this manual before working with the prod uc t. For pe rsonal and system sa fety , and for optimum produc t per formance , make sure you thoroughly understand t he conte nts before installing, u sing, or main taining this product. For t ...

  • Emerson 00809-0100-4102 - page 4

    ii Reference Ma nual 00809-0100-4102, Rev AA Explosions could result in d eath or se rious injur y: Installat ion of this tr ansmitte r in an explosiv e en vironmen t must be in acc ord ance with th e appropriat e local, nation al, and inte rnation al st andards, code s, and prac tices. Ple ase review the appro vals section of the 2051 ref ere nce ...

  • Emerson 00809-0100-4102 - page 5

    iii Reference Manu al 00809-0100-4102, Rev AA Shipping considerations for wire less produc ts (Lithium Batteries : Green Powe r Module, model numbe r 701PGNKF): The unit was shipped t o you without the Po we r Module inst alled. Please re move the Power Module from the unit prio r to shipping. Each powe r module con tains one “D” size primar y ...

  • Emerson 00809-0100-4102 - page 6

    iv Reference Ma nual 00809-0100-4102, Rev AA ...

  • Emerson 00809-0100-4102 - page 7

    i Reference Manu al 00809-0100-4102, Rev AA Table of Contents May 2013 Ta b l e o f C o n t e n t s 1 Section 1: Introduction 1.1 Using this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Models covered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson 00809-0100-4102 - page 8

    ii Reference Manu al 00809-0100-4102, Rev AA Table of Contents May 2013 T a ble of Cont ents 2.6.2 Re-Mapping device variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 2.6.3 Set range points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 2.7 Review configurat ...

  • Emerson 00809-0100-4102 - page 9

    iii Reference Manu al 00809-0100-4102, Rev AA Table of Contents May 2013 Ta b l e o f C o n t e n t s 3.5.1 Rosemount 305 Integral Manifold installati on procedure . . . . . . . . . . . . . 48 3.5.2 Rosemount 306 Integral Manifold installati on procedure . . . . . . . . . . . . . 49 3.5.3 Rosemount 304 Conventional Manifold installati on procedure ...

  • Emerson 00809-0100-4102 - page 10

    iv Reference Manu al 00809-0100-4102, Rev AA Table of Contents May 2013 T a ble of Cont ents A Appendix A: Specifications and Reference Data A.1 Per formance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 A.1 . 1 Conformance to specification (±3s (Sigma)) . . . . . . . . . . . . . . . . ...

  • Emerson 00809-0100-4102 - page 11

    v Reference Manu al 00809-0100-4102, Rev AA Table of Contents May 2013 Ta b l e o f C o n t e n t s C Appendix C: Field Communica tor Menu Trees and Fast Keys C.1 Field Communicator menu trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 D Appendix D: Net work de sign best practices D.1 Effective range . . . . . ...

  • Emerson 00809-0100-4102 - page 12

    vi Reference Manu al 00809-0100-4102, Rev AA Table of Contents May 2013 T a ble of Cont ents ...

  • Emerson 00809-0100-4102 - page 13

    1 Reference Manu al 00809-0100-4102, Rev AA Section 1: Introduction May 2013 Introduc tion Sec t ion 1 Introduc tion Using this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p a g e 1 Models cov ered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson 00809-0100-4102 - page 14

    2 Reference Manu al 00809-0100-4102, Rev AA Section 1: Introduc tion May 2013 Introduction 1.2.3 R ose moun t 2051L Lev e l T ransmitte r  Mea sures lev el and s pecific gravi t y up to 300 psi (20,7 bar) 1.2.4 R ose moun t 2051CF Flowmete r s  Mea sures flo w in line si zes fr om 1 / 2 in. (15 mm) to 96 in. (2400 mm) ...

  • Emerson 00809-0100-4102 - page 15

    3 Reference Manu al 00809-0100-4102, Rev AA Section 1: Introduction May 2013 Introduc tion 1.3 WirelessHART installation flo wchart Figure 1-1. W irelessHART installa tion flowchar t Ye s ST ART HERE Bench Configuratio n and Calibration Field Install No Set Pressure to PV ( page 13 ) Set Range Poin ts ( page 14 ) Select T ransfer F unction for Perc ...

  • Emerson 00809-0100-4102 - page 16

    4 Reference Manu al 00809-0100-4102, Rev AA Section 1: Introduc tion May 2013 Introduction 1.4 T ransmitter ov er view The Ro semoun t 2051C Coplanar de sign is offe red for Diffe renti al Pressure (DP), G age Pressure (GP) and Absolute Pressure (A P) measure ments. The R osemount 2051C utilize s capacita nce sensor t echnology f or DP and GP measu ...

  • Emerson 00809-0100-4102 - page 17

    5 Reference Manu al 00809-0100-4102, Rev AA Section 1: Introduction May 2013 Introduc tion Figure 1-3. Block di agram of operation A. Sensor Module B. Ele ctronics Board C. WirelessHART Signal to Control Sys tem D. Field Communicator 1.5 Considerations bef ore transmitt er installation 1 . 5. 1 W i rel e ss co n s id er at i o n s Power up se q ue ...

  • Emerson 00809-0100-4102 - page 18

    6 Reference Manu al 00809-0100-4102, Rev AA Section 1: Introduc tion May 2013 Introduction Network design be st practices When mounting the de vice , recommended practice s should be c onsidered to ac hieve the best wirele ss per forma nce . See Appendix D: Network design best prac tices for m o r e i nfo r m at io n o n recommen ded prac tices. Fi ...

  • Emerson 00809-0100-4102 - page 19

    7 Reference Manu al 00809-0100-4102, Rev AA Section 1: Introduction May 2013 Introduc tion 701PGNKF). Each ba ttery contains appro xima tely 5 gr ams of lith ium. Under normal conditions, the batte r y mate rial s are self-c ontained and are no t reactive as long as t he batte r y and the Power Module are maintain ed. Care sh ould be ta k en to pre ...

  • Emerson 00809-0100-4102 - page 20

    8 Reference Manu al 00809-0100-4102, Rev AA Section 1: Introduc tion May 2013 Introduction The Power Module contains a pr imar y li thium-thionyl ch loride batter y (Green Power Module, model number 701PGNKF). Each P ower Module c ontains approxim ate ly 5 grams of lithium. Under normal conditions, the Power Module mate rials are self-contained and ...

  • Emerson 00809-0100-4102 - page 21

    Reference Manual 00809-0100-4102, Rev AA Section 2: Configuration May 2013 9 Configu ration Sec tion 2 Con figura tion Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9 Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson 00809-0100-4102 - page 22

    10 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration Wa r n i n g s ( ) 2.3 Required benc h top configur ation Bench top c onfiguration requires a Field Communicator , AMS, or any Wire lessHART Communicator . Connect the Field Communicator le ads to the te rminals l abeled “ COMM” on the Power Modu le. S ...

  • Emerson 00809-0100-4102 - page 23

    11 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration 2.3.1 Connection diagrams Bench hook-up Connec t the bench equipment as shown in Figure 2-1 on pa ge 11 , and turn on the F ield Communicator by pres sing the ON/O FF ke y or log into AMS. The Field Communicator or AM S will searc h for a HAR T-compatible ...

  • Emerson 00809-0100-4102 - page 24

    12 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration 2.4.2 Join de vice t o net work In order to c ommunicate with the Smar t Wireless Gatewa y , and ultimate ly the H ost Syste m, the transmitter must be configured to c ommunicate over the wireless net work. This step is the wirele ss equivalen t of connect ...

  • Emerson 00809-0100-4102 - page 25

    13 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration 2.4.4 Set proc ess vari able units The PV Unit c ommand se ts the proc ess vari able un its to a llow yo u to mo nito r your p rocess using the appropriat e units of measure . T o se lec t a unit of me a sure for t he PV: 1. F rom the Home screen, selec t ...

  • Emerson 00809-0100-4102 - page 26

    14 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration T able 2-1. V ariable Mapping Note The varia ble assigned t o the primary variable drive s the output. This va lue can be selected as Pressure or Scaled V ariable . Re-mapping using a Field Communicator Re-mapping using AMS De vice Manager Right click on t ...

  • Emerson 00809-0100-4102 - page 27

    15 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration 2.5.3 Set transmitt er pe rce nt o f range (transf er function) The Ro semoun t 2051 Wireles s transmitter h as t wo tr ansfe r functions for pressure applica tions: Linear and Square R oot. As shown in Figure 2-2 on page 15 , activating the square root op ...

  • Emerson 00809-0100-4102 - page 28

    16 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration 2.6 Configure for Le vel and Flo w 2.6.1 Con figuring scaled v ariable The Scaled V ariable configuration allows the use r to create a rel ationship/conve rsio n bet ween the pressure units and u ser-defined/cu stom units. The re are t wo use ca ses f or S ...

  • Emerson 00809-0100-4102 - page 29

    17 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration a. When con figuring for lev el applications, select Lin ear under Select Scaled data options . b. When con figuring for flow applications, select Square R oot unde r Select Scaled data options . DP Le vel Example Figure 2-3. Example tank A. 230 in. B. 200 ...

  • Emerson 00809-0100-4102 - page 30

    18 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration recomme nded to use the low flo w cutoff function in order t o hav e a stable output and avoid problems due to process noise at a low flow or no flow condition. A l ow flow cutoff value that is prac tical for the flow eleme nt in the application sh ould be ...

  • Emerson 00809-0100-4102 - page 31

    19 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration 1. Select Manual Set up and click on the HART tab. 2. Assign Primar y , secondar y , ter tiar y and quat ernary variables under Var i a b l e M a p p i n g . 3. Click Send . 4. Carefully re ad the warning and c lick Ye s if it is safe to apply the changes. ...

  • Emerson 00809-0100-4102 - page 32

    20 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration 2.7 Re view configuration data The following is a list of fac tor y default con figurations that can be viewed by using the Field Communicator or AMS. Follow the steps belo w to review t he transmit ter c onfiguration inf ormati on. Note Informa tion and p ...

  • Emerson 00809-0100-4102 - page 33

    21 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration 2.7.3 R eview radio in f ormation To v i e w r a d i o i n f o r m a t i o n : 1. F rom the Home screen, selec t 1: Over view . 2. Select 7: Devi ce Informati on . 3. Select 3: Radio . 4. Select from the corresponding number to view eac h field: 2.7.4 R ev ...

  • Emerson 00809-0100-4102 - page 34

    22 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration 2.8 Configuring the L CD displa y The LCD Displa y configuration command allows cust omization of the LCD to suit application requireme nts. The L CD will altern ate be t ween the selected ite ms. In the following instr ucti ons, the LCD can also be config ...

  • Emerson 00809-0100-4102 - page 35

    23 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration 2.9 Detailed transmitter setup 2.9.1 Con figure proces s aler ts Proce ss ale r ts allow the transmitt er to indi cate when the c onfigured data point is exc eeded. Pro cess al er t s ca n b e s et for pr ess ur e, temper atu re, or both. An aler t will be ...

  • Emerson 00809-0100-4102 - page 36

    24 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration 2051 Wirele ss pressure tr ansmitter , damping only take s effect when the devic e is plac ed in high powe r refresh mode and during calibration. In norm al power mode , the eff ec tive da mping is 0. N ot e t h at w h e n t h e d ev i c e i s i n h i gh p ...

  • Emerson 00809-0100-4102 - page 37

    25 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration 2.10.1 De vice re set The maste r reset f unc tion will reset the devi ce e lectronics. T o perform a devic e reset: Performing master re set us ing a Field Communicator Performing master re set using AMS Devic e Manager 1. F rom the Home screen, selec t 3 ...

  • Emerson 00809-0100-4102 - page 38

    26 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration 2.10.3 Numbe r of a vailable ne ighbor s Viewing number of a vailable ne ighbor s using a Field Communicator Viewing number of a vailable neighbors using AMS Devic e Manager In a self-organizing net work, the more neighbor s a device has, the more robust t ...

  • Emerson 00809-0100-4102 - page 39

    27 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration 2.11 Adv anced F unc tions for HART Prot ocol 2.11.1 Sa ving, R ecalling, and Cloning Con figuration Da ta Use the c loning f eatur e of the Fie ld Communica tor or the AM S “Use r Confi guration ” f eatur e to configure several 2051 Wireless transmitt ...

  • Emerson 00809-0100-4102 - page 40

    28 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration When finished, the Fie ld Communicator informs y ou of the statu s. Re peat Ste ps 3 through 13 to configure ano ther transmitter . Note The transmit ter rec eiving cloned data must have the same soft ware ve rs ion (or later) a s the original transmitter ...

  • Emerson 00809-0100-4102 - page 41

    Reference Manual 00809-0100-4102, Rev AA Section 3: Installation May 2013 29 Installa tion Sec tion 3 Installa tion Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 29 Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson 00809-0100-4102 - page 42

    30 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion 3.2.1 W ar nings ( ) F ailu re to follow these insta llation guidelines could result in death or serious injur y .  Make sure only qualified pe rs onnel pe r form the install ation. Explosions could result in death or serious injury : Installation o f thi ...

  • Emerson 00809-0100-4102 - page 43

    31 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion 3.3 Considerations 3.3.1 Installation c o nside rations Meas uremen t per formanc e depe nds upon proper installa tion of the transmitt er and impulse piping. Mount the transmit ter clo se to the proces s and use a minimum of piping t o achieve best performa ...

  • Emerson 00809-0100-4102 - page 44

    32 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Internal antenna po sition The intern al antenna is designed for multiple mounting orientations. The tran smitter should be mounted acc ording to me asureme nt best practice s for yo ur pressure measure men t application. The antenn a should be approxim ate ...

  • Emerson 00809-0100-4102 - page 45

    33 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-2. Installa tion Flowch ar t 3.3.5 Draf t range conside rations Installation For the R ose mount 2051CD0 dra f t range pressure transmitte r , it is best to mount the transmitte r with the is olat ors parallel to the ground . See Figure 3-3 on p age ...

  • Emerson 00809-0100-4102 - page 46

    34 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Tilting of the transmitte r may cau se a z ero shi f t in the transmitte r output, but can be elimin ated by performing a trim procedure. Figure 3-3. Draft range inst allation example A. Isolators Reduc ing process noise R osemount 2051CD0 draft transmitters ...

  • Emerson 00809-0100-4102 - page 47

    35 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion 3.4 Installation procedures For dimension al drawing informa tion refe r to Appendix A: Specifications and Ref ere nce Data on page 89 . Process flange orientation Mount the proce ss flanges with suffic ient cle arance f or proces s connections. For safe t y ...

  • Emerson 00809-0100-4102 - page 48

    36 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Environmental se al for housing Always e nsure a proper se al by installing the e lectronics housing co ve r(s) so that polyme r contact s polymer (i.e. no o-ring visi ble). Use R osemount O-rings. 3.4.1 Mount the transmitt er Mounting br ack ets R ose mount ...

  • Emerson 00809-0100-4102 - page 49

    37 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-5. Mounting bracket option code B4 A. 5 / 16 x 1 1 / 2 Bolts for Panel Moun ting (Not Supplied) B. 3.4 (85) C. 3 / 8 -16 x 1 1 / 4 Bolts for Mounting to T ransmitter D. 2.8 (71) Note : Dimensions a re in inches (millimeters). Flange bolts The Ro sem ...

  • Emerson 00809-0100-4102 - page 50

    38 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Bolt installation Only use bolts supp lied with the Ro semoun t 2051 or sold by Emerson Proc ess Man ageme nt as spare parts. When installing the transmitte r to one o f the option al mounting bra cke ts, torque the bolts to 125 in-lb . (0,9 N-m). Use the f ...

  • Emerson 00809-0100-4102 - page 51

    39 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-7. Mounting bolts and bolt configurations for coplanar flange A. T ransmitter with flange bolts B.T ransmitter w ith flange ada p ters and flange/adapter bolts C. 1.75 (44) × 4 D. 2.88 (73) × 4 Note : Dimensions are in inches (millimeters). Figure ...

  • Emerson 00809-0100-4102 - page 52

    40 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-9. Panel mounting brack et option codes B2 and B8 Figure 3-10. Flat mounting br acket option codes B3 and BC A. 1.625 (41) B. 2.125 (54) C. 2.81 (71) D. 8 .00 (203) Note: Dimensions are in inches (millimeter s). A. 3.75 (95) B. 1.63 (41) C. 4.09 (10 ...

  • Emerson 00809-0100-4102 - page 53

    41 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion 3.4.2 Impulse pip ing Best practices The piping between the process and the transmitte r must accura tely tr ansfe r the pressure t o obtain accurate measureme nts. There are five possible sources of error: leaks, fric tion loss (par ticularly if purging is ...

  • Emerson 00809-0100-4102 - page 54

    42 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Mounting Require ments Ref er t o Figure 3-11 on page 43 f or examples of the following mounting con figurations: Liquid Flow Measurement  Plac e taps to the side o f the line to prev en t sediment de posits on the proces s isolat ors.  Mount the trans ...

  • Emerson 00809-0100-4102 - page 55

    43 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-1 1. Installat ion example s A. Drain/ve nt valv es 3.4.3 Proce ss c onnec tions Coplanar or traditio nal process c onnec tion Install and tighten all four fl ange bolts before applying pre ssure to a void leakage . When prope rly installed, the fla ...

  • Emerson 00809-0100-4102 - page 56

    44 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion 1. Re mov e the flange bolts. 2. Leaving the flange in plac e, mov e the adapte rs into position with t he O-ring inst alled. 3. Clamp the adapters and the Coplanar flange to the transmitte r module usin g the longer of the bolts supplied. 4. Tighten the bol ...

  • Emerson 00809-0100-4102 - page 57

    45 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-12. Inline gage low side pressure port A. Low side pressure por t (atmospheric reference) a 3.4.5 Po wer Module installation Figure 3-13. P ower Module A. Power Mo dule (5/64 -in ch hex wren ch re qui red) Do not apply tor que directly to the sensor ...

  • Emerson 00809-0100-4102 - page 58

    46 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion T o mak e connections, perform the following proc edure: 1. Re move the hou sing cove r on the Power Module compartment side. The Po wer Module supplies all power to the transmit ter . 2. Connect Powe r Module 701PGNKF . 3. Re place the Po wer Module co ver ...

  • Emerson 00809-0100-4102 - page 59

    47 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-14. Op tional LCD Display 3.5 R osemount 304, 305 and 306 integral manifolds The Ro semo unt 305 Int egral Manif old mounts direct ly to the transmitte r and is avail able in t wo designs: T radit ional and Coplanar . The tradit ional 305 Integral M ...

  • Emerson 00809-0100-4102 - page 60

    48 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-15. Integral Manif old Designs A. 2051C and 304 Conv entional B. 2051C and 305 Int egral Coplanar C. 2051C and 305 Integral T raditional D. 2051T a nd 306 In-Line 3.5.1 R ose mount 305 In tegral Manifold installation proc edure T o inst all a 305 In ...

  • Emerson 00809-0100-4102 - page 61

    49 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-16. Bolt tight ening pattern 3. If the PTFE sensor module O-rings hav e been repl aced, the fl ange bolts should be re- tig htene d af ter i nst a llatio n to comp ensate for col d f low of the O- ri ngs. 4. If applicable , install flange a dapt ers ...

  • Emerson 00809-0100-4102 - page 62

    50 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Note If using thread tape , be sure the thread tape does not strip whe n the manifold a sse mbly is star ted. 5. W rench ti ghten m anif old into pro ces s connection. (Note : Minimum toqu e value is 425 in-lbs) 6. Coun t how many threads are still showing. ...

  • Emerson 00809-0100-4102 - page 63

    51 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Drain/ Ve n t Va l v e Drain/ Ve n t Va l v e Equalize (closed) Process Isolat e (open) Isolate (open) H L In normal operation the two block valves between the proces s and instrument por ts will be open and the equalizing valv e will be closed. Drain/ Ve n ...

  • Emerson 00809-0100-4102 - page 64

    52 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Fi ve- val ve Nat ur al Gas conf igu rat ion s s how n: Note Do not open the low side equalize valve bef ore the h igh side equalize valve . Doing so will ove rpressure the tran smitter . Te s t (Plugged) Te s t (Plugged) Equalize (closed) Process Isolate (o ...

  • Emerson 00809-0100-4102 - page 65

    53 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion 3. Ope n the equali ze v alve on the low pres sure (downstream) side of the transmitter . The manifold is now in the prope r configuration for z eroing the transmitt er . Te s t (Plugged) Te s t (Plugged) Equalize (open) Process Isolate (closed) Isolate (ope ...

  • Emerson 00809-0100-4102 - page 66

    54 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion ...

  • Emerson 00809-0100-4102 - page 67

    Reference Manual 00809-0100-4102, Rev AA Section 4: Commissioning May 2013 55 Commis sioning Sec tion 4 Commis sioning Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pag e 55 Viewing network status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson 00809-0100-4102 - page 68

    56 Reference Ma nual 00809-0100-4102, Rev AA Section 4: Commissionin g May 2013 Commis sioning 4.2.1 W ar nings ( ) F ailu re to follow these insta llation guidelines could result in death or serious injur y .  Make sure only qualified pe rs onnel pe r form the install ation. Explosions could result in death or serious injury : Installation o f ...

  • Emerson 00809-0100-4102 - page 69

    57 Reference Manu al 00809-0100-4102, Rev AA Section 4: Commissioning May 2013 Commis sioning 4.3 Viewing network status If the R osemoun t 2051 Wirele ss was c onfigured with the Ne t work ID and Join Ke y and sufficien t time f or network polling ha s pa ssed, the tr ansmitter should be c onnec ted to the network. T o ve rif y connec tivit y , op ...

  • Emerson 00809-0100-4102 - page 70

    58 Reference Ma nual 00809-0100-4102, Rev AA Section 4: Commissionin g May 2013 Commis sioning Figure 4-1. Diagnostic Screen S equence Figure 4-2. Net work Join Status Screens Field Communicator For HAR T Wireless transmitter c ommunication, a Ro semoun t 2051 Wireless DD is required. T o obtain the late st DD, visit the Eme rson Process Man ageme ...

  • Emerson 00809-0100-4102 - page 71

    59 Reference Manu al 00809-0100-4102, Rev AA Section 4: Commissioning May 2013 Commis sioning Figure 4-3. Smart Wireless Gatewa y Explorer page. AMS Suite Wireless Configurator When the device ha s joined the net work, it will appear in the Devic e Manage r as illu strated in Figur e 4-4 . For HART Wirele ss transmitte r communication, a R osemoun ...

  • Emerson 00809-0100-4102 - page 72

    60 Reference Ma nual 00809-0100-4102, Rev AA Section 4: Commissionin g May 2013 Commis sioning Figure 4-5. Smar t Wireless Gate way Network Settings 4.4.1 Using the Fie ld Communica tor Note In orde r to co mmunicat e with a Fiel d Communica tor , powe r the R ose mount 2051 Wire les s T r ansmitter b y connecting the Power Module . Fo r more in fo ...

  • Emerson 00809-0100-4102 - page 73

    61 Reference Manu al 00809-0100-4102, Rev AA Section 4: Commissioning May 2013 Commis sioning T able 4-1. Rosemount 2051 Wireless F ast Ke y Sequence Figure 4-6. Field Co mmunicator Connec tions 4.5 Configuring transmitt er securit y There are t wo securit y metho ds with the Rose mount 2051 Wireless transmitter .  HART Lock  Configuration Bu ...

  • Emerson 00809-0100-4102 - page 74

    62 Reference Ma nual 00809-0100-4102, Rev AA Section 4: Commissionin g May 2013 Commis sioning Configuring HART Lock using Field Communicat or Configuring HART Lock us ing AM S Device Manager 1. Right c lick on the devic e and se lect Configure . 2. Under Manual Setup se lec t the Securit y tab. 3. Click Lock/Unlock button un der HART Lock (Sof t w ...

  • Emerson 00809-0100-4102 - page 75

    63 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e Sec tion 5 Ope ration and m aint e n anc e Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 63 Calibration overview . . . . . . . . . . . ...

  • Emerson 00809-0100-4102 - page 76

    64 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance T able 5-1. Rec ommend ed Calibration T asks Note : For 2051CA , 2051T A range 0 and range 5 devices, an acc urate ab solute pressur e source is required. 5.3.1 Dete r mining nece ssar y Sensor T rims Bench calibrations allow for c ...

  • Emerson 00809-0100-4102 - page 77

    65 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e For transmitters that are field installed, the ma nifolds discus sed in “Ros emount 304, 305 and 306 int egral mani folds ” on page 47 allow the diff ere ntial transmitt e r to be z eroed using the ze ro trim function. Both ...

  • Emerson 00809-0100-4102 - page 78

    66 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance Sample calculation for 2051 (0.04% accuracy & 5-year stability) St ep 1: Dete rmine the per formance required f or your application. St ep 2: Determine the operating conditions. St ep 3: Calcu late t otal prob able error (TPE). ...

  • Emerson 00809-0100-4102 - page 79

    67 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e Example A range 4 diff ere ntial pressure HAR T transmitte r (2051CD4...) will be u sed in an applica tion with a static line pre ssure of 1200 psi (83 ba r). Th e transmitte r output is ranged with the Low er Range V alue at 50 ...

  • Emerson 00809-0100-4102 - page 80

    68 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance position. Since this correc tion maintains the slo pe of the characterization cur ve, it should not be used in place o f a sensor trim over the full sensor range . When pe r forming a z ero trim, e nsure tha t the equalizing valv e ...

  • Emerson 00809-0100-4102 - page 81

    69 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e Note Use a pre ssure input source th at is at le a st four time s more accura te th an the transmitte r , and allow the input pressure to stabiliz e for te n seconds bef ore ent ering any value s. Performing a Sensor T rim with ...

  • Emerson 00809-0100-4102 - page 82

    70 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance 5.4.3 R ecall F ac tor y T r im—Se nsor T rim The Recall F ac tor y T rim —Sensor T rim command allows the restoration of the as-shipped fac tor y sett ings o f the Se nsor T rim. This comm and can be u seful f or recov ering f ...

  • Emerson 00809-0100-4102 - page 83

    71 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e Zero Eff ec t: ± 0.1% of the upper range limit pe r 1000 psi (69 bar) f or line pressures from 0 t o 2000 psi (0 to 138 bar) For line pre ssures abov e 2000 psi (138 bar), the z ero eff ect error is ± 0.2% of the upper range l ...

  • Emerson 00809-0100-4102 - page 84

    72 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance T o calculate the low trim (L T) value : T o calculate the high trim (HT) value : Complete a 2051 Wireless sensor trim and ente r the corrected va lues for low trim (L T ) and high trim (HT), refe r to “Sens or T rim” on pa ge ...

  • Emerson 00809-0100-4102 - page 85

    73 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e 5.5 LCD Screen Messages 5.5.1 S tar tup Screen Seque nce The following screens will dis play when the Pow er Module is first connected to the Ro semount 2051 Wire less. All Segments On : used to vis ually dete rmine if there are ...

  • Emerson 00809-0100-4102 - page 86

    74 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance SV Scree n - sensor t empe rature value T V Sc re en - dev ice tem per atu re value QV Screen - voltag e reading at the powe r supply terminals Pe rcen t Range Screen - pe rce nt range reading Aler t Screen - at lea st one al ert i ...

  • Emerson 00809-0100-4102 - page 87

    75 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e 5.5.2 Diagnostic Butt on Screen Seque nc e The following five screens will displa y when the device is opera ting properly and the Diagnostic Button has been pressed. Device In forma tion - T ag: use r en tered tag which is eigh ...

  • Emerson 00809-0100-4102 - page 88

    76 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance 5.5.3 Net work Diagno stic S tatus Scree ns These scree ns display the network status of the devic e . Only one will be shown dur ing the star tup sequence or d iagnostic seque nce . Diagno stic Button Screen 5: voltage re ading a ...

  • Emerson 00809-0100-4102 - page 89

    77 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e Diagno stic Button Scree n 4.4: the devic e is in a disconnected state and requires a “Force Join ” com ma n d t o jo in t h e n et w or k Diagno stic Button Scree n 4.5: the devic e is searching for the Net work Diagno stic ...

  • Emerson 00809-0100-4102 - page 90

    78 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance Diagno stic Button Screen 4.9: the devic e ha s joined a network and has bee n fully confi gured and ha s multiple pare nts n e t w k O K ...

  • Emerson 00809-0100-4102 - page 91

    79 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e 5.5.4 Dev ice Di agnostic Screens The following screens will show the device diagnostics depending on the state of the device . Dev ice Infor mat ion - Status: th ere is a critical error which ma y preve nt the devic e from ope ...

  • Emerson 00809-0100-4102 - page 92

    80 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance QV Screen - voltag e reading at the powe r supply terminals Pe rcen t Range Screen - pe rce nt range reading Aler t Screen - at lea st one al ert i s present - this screen will not display if n o al er ts are present Diagno stic Bu ...

  • Emerson 00809-0100-4102 - page 93

    81 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e Diagno stic Button Scree n 7.1: the terminal v oltage has dropped below leve l of operating limit. Re place the Po wer Module (Part Number: 701PGNKF) Diagno stic Button Scree n 7.2: the terminal v olt age is below the recommende ...

  • Emerson 00809-0100-4102 - page 94

    82 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance Note Use the R ose mount Wireless LCD P ar t Number: 00753-9004-0002. Diagno stic Button Screen 9.2: configura tion of the transmitter is invalid such that non-critical operat ion of the devic e may be aff ected - check th e ex te ...

  • Emerson 00809-0100-4102 - page 95

    Reference Manual 00809-0100-4102, Rev AA Section 6: Troubleshooting May 2013 83 Tr o u b l e s h o o t i n g Sec tion 6 T roubleshoo ting Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 83 Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson 00809-0100-4102 - page 96

    84 Reference Manu al 00809-0100-4102, Rev AA Section 6: Troubleshooting May 2013 Tr o u b l e s h o o t i n g 6.2.1 W ar nings ( ) T able 6-1. Rosemount 2051 Wireless Devic e Status Information Explosions could result in death or serious injury : Installation o f this transmitter in an explo sive en vironment mu st be in accor dance with the approp ...

  • Emerson 00809-0100-4102 - page 97

    85 Reference Manu al 00809-0100-4102, Rev AA Section 5: Troubleshooting May 2013 Tr o u b l e s h o o t i n g Pressure ha s Exc eeded Limits The sens or has ex ceeded the maximum measuremen t rang e. 1. Check process f or possible saturation cond ition 2. V erif y tha t the appropri at e sensor w as cho sen f or the application 3. Reconfirm sensor ...

  • Emerson 00809-0100-4102 - page 98

    86 Reference Manu al 00809-0100-4102, Rev AA Section 6: Troubleshooting May 2013 Tr o u b l e s h o o t i n g LO A l ar m The p rimar y variable has surpas sed the us er defi ned limit. 1. V erif y that the process variable is within user specified limits 2. Reco nf ir m t h e us er d ef in ed a lar m li mi t 3. If not ne eded, disable t his alert ...

  • Emerson 00809-0100-4102 - page 99

    87 Reference Manu al 00809-0100-4102, Rev AA Section 5: Troubleshooting May 2013 Tr o u b l e s h o o t i n g T able 6-2. Rosemount 2051 Wireless T roubleshooting T a ble 6-3. Wireless Network T roubleshooting Sympto m Rec om me nd ed Ac tio ns T ransmitte r will not re spond to c hanges in applied pres sure Check test equipme nt Check impulse pipi ...

  • Emerson 00809-0100-4102 - page 100

    88 Reference Manu al 00809-0100-4102, Rev AA Section 6: Troubleshooting May 2013 Tr o u b l e s h o o t i n g 6.3 Remo ving from ser v ice Fol l ow t h es e st ep s: 1. Follow all plant safety rules and pro cedures. 2. Isola te and ve nt the proces s from the transm itter be fore re moving the transmitte r from ser vice. 3. Re move the transmitte r ...

  • Emerson 00809-0100-4102 - page 101

    Reference Manual 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 89 Specifications and Ref ere nce Data Appe ndix A S pecifica tions and Refer en ce Da t a Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 89 F unc tional Specifications . . . . . . . . . . . . . ...

  • Emerson 00809-0100-4102 - page 102

    90 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Refer e nce Acc ura c y (1) T otal P er formance Models (1) (1) T otal performanc e is determined b y performing a root sum sq uare calc ulation on refer ence a ccuracy , ambien t tempe rature effec t, and line pressure effect erro ...

  • Emerson 00809-0100-4102 - page 103

    91 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data Long T erm Stabilit y Dynamic Performance Line Pressure Effect per 1000 psi (6,9 MP a) (1) Models Long T erm S tability 2051C Ranges 2-5 ±0.125% of URL for 5 years ±50 °F (28 ° C) tem pera ture ch anges, and u p to 1000 p si (6,9 ...

  • Emerson 00809-0100-4102 - page 104

    92 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Ambient T emperature Effect per 50°F (28°C) Mounting Po sition Effects Vibrati on Effect Less th an ±0.1% of URL when tested pe r the requ iremen ts of IE C60770-1 fiel d or pipeline wi th high vibra tion leve l (10-60 Hz 0.21mm ...

  • Emerson 00809-0100-4102 - page 105

    93 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data A .2.2 R ange and Sens or Limits Zero and Span Adjustment R equirements Ze ro and sp an values can be se t anywhe re within the ra nge limits stated in Ta b l e A - 1 . Span mu st be gre ater than or equ al to the minimum s pan state ...

  • Emerson 00809-0100-4102 - page 106

    94 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Update rate User se lec table, 1 second to 60 minutes. Wireless sensor module for in-line tr ansmitters The 2051 wirele ss transmitter require s the engineered polyme r housing to be se lec ted. The standard sensor module will come ...

  • Emerson 00809-0100-4102 - page 107

    95 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data Ro semount 2051L Limit is flange rating or sensor rating, whichever is lower (see the table below). A .3.2 S t atic pres sure limit R osemount 2051CD Only Opera tes within s pecificat ions bet ween sta tic line pressure s of 0.5 psi ...

  • Emerson 00809-0100-4102 - page 108

    96 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Process T emperatur e Limits At atmo spheric pre ssures and abov e. A. 3 . 5 H um i di t y L im i ts 0–100% re lativ e humidity A. 3 . 6 V o l u m e tr i c D i s pl ac e me n t Less th an 0.005 in 3 (0,08 cm 3 ) A. 3 . 7 D am p i ...

  • Emerson 00809-0100-4102 - page 109

    97 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data A .4 Ph ysical specifications A .4.1 Electr ical connections HART int erface connections fixed to the Power Module . A .4.2 Proc ess c o nnec tions R osemount 2051C 1 / 4 –18 NPT on 2 1 / 8 -i n. ce nt ers 1 / 2 –14 NPT on 2-in. ...

  • Emerson 00809-0100-4102 - page 110

    98 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Process flange s and adapters Plat ed carbon steel SST: CF-8M (Ca st 316 SST) per ASTM A743 Cast C-276: CW-12MW pe r ASTM A494 Cast Allo y 400: M-30C per ASTM A494 We t t e d O - r i n g s Glas s-filled PTFE (Graphit e-filled PTFE ...

  • Emerson 00809-0100-4102 - page 111

    99 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data Bolts Plat ed carbon steel per ASTM A449, T y pe 1 Aust enitic 316 SST per ASTM F5 93 ASTM A453, Clas s D, Grad e 660 SST ASTM A193, Grade B7M alloy stee l ASTM A193, Class 2, Gra de B8M SST Alloy K-500 Sensor Module Fill Fluid Silic ...

  • Emerson 00809-0100-4102 - page 112

    100 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data A .4.6 Shipping W eights f or 2051 Wi reles s Pressure T ransmitte r T able A-2. T ransmitter weights without options T able A-3. 2051L weights without opti ons T able A-4. T ransmitter option we ights Compl ete T ran smitter (1) ...

  • Emerson 00809-0100-4102 - page 113

    101 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data A .5 Dimensional Drawings Dimensions are in inches (milli meters). Process adapte rs (option D2 ) and Ro semount 305 integral manif olds must be orde red with the transmitter . 2051 Wireless Housing with In-Line and Coplanar SuperMo ...

  • Emerson 00809-0100-4102 - page 114

    102 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data (1) T olerances are 0.040 (1,02), –0 .020 (0,51). T able A-5. 2051L Dimensional Specifications Exc ept whe re indica ted, dimen sions are in inche s (millimet ers). Class Pipe Size Flange Thickness A Bolt Circle Diameter B Outs ...

  • Emerson 00809-0100-4102 - page 115

    103 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data A .6 Ordering Information T able A-6. 2051C Coplanar Pressure T ransmitte rs O rdering Information ★ The Standard offering represents the most common options. The starred opti ons ( ★ ) should be selected for best delivery . __ ...

  • Emerson 00809-0100-4102 - page 116

    104 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data O-ring Stan dard St an da rd A Glass-f ille d PT FE ★ B Graphite-filled PTFE ★ Sensor Fill Fluid Stan dard St an da rd 1 Silicone ★ Housing Mat erial Conduit Entr y Size Stan dard St an da rd P Engineered Polyme r N/A ★ Wi ...

  • Emerson 00809-0100-4102 - page 117

    105 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data Seal Ass emblies (9) Stan dard St an da rd S1 (7) Asse mble to one R os emoun t 1199 se al ★ S2 (8) Assemble to t wo Rosemount 1199 seals ★ All-Welded Seal Assemblies (for high vacuum applications) (9) Stan dard St an da rd S0 O ...

  • Emerson 00809-0100-4102 - page 118

    106 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Calibration Cer tificate Stan dard St an da rd Q4 Calibration Cer tificate ★ QG Calibration Certificate and GOST V erification Certificate ★ QP Calibration cer tification and tamper evident seal ★ Material T raceability Cer ...

  • Emerson 00809-0100-4102 - page 119

    107 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data RC 1 / 4 RC 1 / 2 Process Connection Expanded D9 (14) R C ¼ Flange with R C ½ Flange Ad apter , C S - SST Max Static Line Pressure Stan dard St an da rd P9 4500 psig (310 bar) Static Pressure Limit (2051CD Range s 2–5 only) ★ ...

  • Emerson 00809-0100-4102 - page 120

    108 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data T able A-7. 2051T In-Line Pressure T ransmitter Ordering Information ★ The Standard offering represents the most common options. The starred opti ons ( ★ ) should be selected for best delivery . __ The Expanded offering is sub ...

  • Emerson 00809-0100-4102 - page 121

    109 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data Mounting Brack et Stan dard St an da rd B4 Brack et f or 2-in. Pip e or Pane l Mounting , All SST ★ Product Certifications Stan dard St an da rd I1 A TE X Intrinsic Safe t y ★ I2 INMETRO Intrinsic Saf ety ★ I3 China Intrinsic ...

  • Emerson 00809-0100-4102 - page 122

    110 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Surface Finish Stan dard St an da rd Q16 Sur face finish certification for sanitar y remote se als ★ T oolkit T ot al System Per formance Reports Stan dard St an da rd QZ Re mot e Se al Syste m Pe r forma nce Calc ulati on Re po ...

  • Emerson 00809-0100-4102 - page 123

    111 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data T able A-8. Ros emount 2051L Liquid Lev el T ransmitter Ordering Information ★ The Standard offering represents the most common options. The starred opti ons ( ★ ) should be selected for best delivery . __ The Expanded offering ...

  • Emerson 00809-0100-4102 - page 124

    112 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data P 2-in. ANSI/ASME B16.5 Class 600 CS ★ E 3-in. ANSI/ASME B16.5 Class 600 CS ★ X (1) 2-in. ANSI/ASME B16.5 Clas s 150 SS T ★ F (1) 3-in. ANSI/ASME B16.5 Clas s 150 SS T ★ G (1) 4-in. ANS I/A SME B16.5 Class 150 SS T ★ Y ( ...

  • Emerson 00809-0100-4102 - page 125

    113 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data O-ring Stan dard St an dar d A Glass-filled PTFE ★ Housing Mat eri al Cond uit En tr y Size Stan dard St an dar d P Enginee red Polym er N/A ★ Wireless Options (Re quires Wireless output c ode X and Engineered Poly mer housing c ...

  • Emerson 00809-0100-4102 - page 126

    114 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data T oolkit T ot al System Per formance Reports Stan dard St and ard QZ Re mote Se al System Pe r formance Calcula tion Re por t ★ Hardware A djustments Stan dard St and ard DZ Digital Zero T rim ★ Soft ware Conf iguration Stan d ...

  • Emerson 00809-0100-4102 - page 127

    115 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data T able A-9. Rosemount 2051CF A Annubar Flowmeter Ordering Information ★ The Standard offering represents the most common options. The starred opti ons ( ★ ) should be selected for best delivery . __ The Expanded offering is subj ...

  • Emerson 00809-0100-4102 - page 128

    116 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Pipe Material / Mountin g Assemb ly Material Stan dard St a n dar d C Carbon steel (A105) ★ S 31 6 St ai n l ess St ee l ★ 0 No Mount ing (Cu stomer S upplied) ★ Expanded G Chrome-Moly Grade F-11 N Chrome-Moly Grade F-22 J C ...

  • Emerson 00809-0100-4102 - page 129

    117 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data R6 600# RTJ Flange R9 (1) 900# RTJ Flange RF (1) 1500# RTJ Flange RT (1) 2500# RTJ Flange Opposite Side Support or Packing G land Stan dard St a n dar d 0 No opposite side suppor t or pac king gland (Required for Pak-Lok and Flange- ...

  • Emerson 00809-0100-4102 - page 130

    118 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Opt io ns (Include with selec ted model number) Pressure T esting Expanded P1 (2) Hydrostatic T esting with Certificate PX (2) Extended Hydrostatic T esting Special Cle aning Expanded P2 Cleaning for Speci al Ser vices PA Cleaning ...

  • Emerson 00809-0100-4102 - page 131

    119 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data Expanded G1 Needle V alves, Carbon Stee l G3 Needle V alves, All oy C-276 G5 OS&Y G ate V alve, Carbon Stee l G7 OS&Y Gat e Valve , Alloy C-276 Special Shipme nt Stan dard St a n dar d Y1 Mounting Hardware Shipped Separate l ...

  • Emerson 00809-0100-4102 - page 132

    120 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data T able A-10. Rosemount 2051CFC Compact Flowmet er Ordering Information ★ The Standard offering represents the most common options. The starred opti ons ( ★ ) should be selected for best delivery . __ The Expanded offering is s ...

  • Emerson 00809-0100-4102 - page 133

    121 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data T ransmitter Housin g Material Conduit Entr y Siz e Stan dard St a n dar d P Engineered Po lymer N/A ★ Tr a n s m i t t e r P e r f o r m a n c e C l a s s Stan dard St a n dar d 1 Up to ±2.00% flow rate accurac y , 8:1 flow turn ...

  • Emerson 00809-0100-4102 - page 134

    122 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data T ransmitter Calibration Cer tification Stan dard St a n dar d Q4 Calibration Certificate for T ransmitter ★ Mate rial T raceability Cer tification Stan dard St a n dar d Q8 Mate rial T raceabilit y Certification per EN 10204:20 ...

  • Emerson 00809-0100-4102 - page 135

    123 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data T able A-11. Rosemount 2051CFP Integr al Orifice Flowmeter Ordering Information ★ The Standard offering represents the most common options. The starred opti ons ( ★ ) should be selected for best delivery . __ The Expanded offeri ...

  • Emerson 00809-0100-4102 - page 136

    124 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data 0250 0.250-in. (6.35 mm) for 1-in. Pipe ★ 0345 0.345-in. (8.76 mm) for 1-in. Pipe ★ 0500 0.500-in. (12 .70 mm) for 1-i n. Pipe ★ 0630 0.630-in. (16 .00 mm) for 1-i n. Pipe ★ 0800 0.800-in. (20 .32 mm) for 1-i n. Pipe ★ 0 ...

  • Emerson 00809-0100-4102 - page 137

    125 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data Stan dard WP5 Inte rnal Antenn a, Compatible with Green Powe r Module (I.S . Powe r Module Sold Separately) Opt io ns (Include with selec ted model number) T ransmitte r Body / Bolt Mate rial Expanded GT High T empera ture (850 °F ...

  • Emerson 00809-0100-4102 - page 138

    126 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data T ransmitter Calibration Cer tification Stan dard St a n da rd Q4 Calibration Cer tificate for T ransmitter ★ Produc t Certifications Stan dard St a n da rd I1 A TE X Intrinsic Saf ety ★ I2 INMETRO Intrinsic Saf ety ★ I3 Chi ...

  • Emerson 00809-0100-4102 - page 139

    127 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data A. 7 Op ti on s Standard c onfiguration Unless otherwi se specified, transmitter is shipped as follows : Custom c onfiguration If Option Code C1 is orde red, the custome r may ha ve the factor y pre-con figure speci al parameters in ...

  • Emerson 00809-0100-4102 - page 140

    128 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Output information Output range points must be the same unit of measure . Available units of mea sure include: Display and interface options Digital displa y option provides di agnostic mess ages f or local trou blesho ot ing and ...

  • Emerson 00809-0100-4102 - page 141

    129 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data R osemount 2051C T raditiona l Flange br acke t options B1 Brack et f or 2-in. Pipe Moun ting  For use with t he tradition al flan ge optio n  Bracke t for mounting on 2-in. pipe  Carbon steel construc tion with carbon stee ...

  • Emerson 00809-0100-4102 - page 142

    130 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data A .8 Spare par ts Meter Kit 02051-9020-0001 Mete r Cove r O-ring, Silic one, #2 35 grea se, o-ring LC D A s s e m b l y Con nec t or , 4 -Pos it ion LCD Assembly Kit 02051-9020-0002 LC D A s s e m b l y Con nec t or , 4 -Pos it io ...

  • Emerson 00809-0100-4102 - page 143

    Reference Manual 00809-0100-4102, Rev AA Appendix B: Product Certifications May 2013 131 Produc t Cer tifications Appe ndix B Produc t Ce r t ifications Wireless Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 131 B.1 Wireless Cer tifications B.1.1 Approv ed manufactur ing lo ...

  • Emerson 00809-0100-4102 - page 144

    132 Reference Manu al 00809-0100-4102, Rev AA Appendix B: Product Ce rtifications May 2013 Produc t Cer tifications B.1. 5 Ordinar y locat ion cer tificat ion for FM As st andard , the transmitter h as been examined and tested to de termine th at the design meets basic e lec trical, mech anical, and fire pro tection requireme nts by FM, a n ationa ...

  • Emerson 00809-0100-4102 - page 145

    133 Reference Manu al 00809-0100-4102, Rev AA Appendix B: Product Certifications May 2013 Produc t Cer tifications Special Conditions for Safe Use (X) The plastic e nclosure ma y constitute a pote ntial e lec trostatic ignition risk and must not be rubbed or cle aned with a dr y cloth. For u se with R ose mount 701PGNKF only . I7 IECEx Intrinsic Sa ...

  • Emerson 00809-0100-4102 - page 146

    134 Reference Manu al 00809-0100-4102, Rev AA Appendix B: Product Ce rtifications May 2013 Produc t Cer tifications ...

  • Emerson 00809-0100-4102 - page 147

    Reference Manual 00809-0100-4102, Rev AA Appendix C: Field Co mmunicator Menu Trees May 2013 135 Fiel d Communi cator Menu T rees and F ast Ke ys Appe ndix C F ie ld Communica t or Me nu T ree s and F a st K eys Field Communicator menu trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 135 C .1 Field Comm ...

  • Emerson 00809-0100-4102 - page 148

    136 Reference Manu al 00809-0100-4102, Rev AA Appendix C: Field Communicator Menu Trees May 2013 Field Communicat or Menu T rees and F ast K eys Figure C-2. Rosemount 2051 Field Communicator menu tree: Configure Home 1 Overview 2 Configure 3 Service T ools Configure 1 Guided Setup 2 Manual Setup 3 Alert Setup Alert Setup 1 Pressure 2 Sensor T emper ...

  • Emerson 00809-0100-4102 - page 149

    137 Reference Manu al 00809-0100-4102, Rev AA Appendix C: Fiel d Communicator Menu Trees May 2013 Fiel d Communi cator Menu T rees and F ast Ke ys Figure C-3. Rosemount 2051 Field Communicator menu tree: Manual Set up Home 1 Overview 2 Configure 3 Service T ools Configure 1 Guided Setup 2 Manual Setup 3 Alert Setup Device Display 1 Display options ...

  • Emerson 00809-0100-4102 - page 150

    138 Reference Manu al 00809-0100-4102, Rev AA Appendix C: Field Communicator Menu Trees May 2013 Field Communicat or Menu T rees and F ast K eys Figure C-4. Rosemount 2051 Field Communicator menu tree: Manual Set up Home 1 Overview 2 Configure 3 Service T ools T rends 1 Pressure 2 Sensor T emperature 3 Scaled V ariable 4 Data History Pressure 1 Pre ...

  • Emerson 00809-0100-4102 - page 151

    Reference Manual 00809-0100-4102, Rev AA Appendix D: Network de sign best practices May 2013 139 Appendix D: Network design best prac tices Appe ndix D Net work design be st prac tice s Effective range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 139 All recommended pract i ...

  • Emerson 00809-0100-4102 - page 152

    140 Reference Manu al 00809-0100-4102, Rev AA Appendix D: Network design best practices May 2013 Appendix D: Network design best prac tices For example s and complet e explana tions, ref er to the IEC62591 Wireless HAR T System Engineering Guide : http ://www2.eme rsonproces s.com/sit ead minc ente r/PM%20Ce ntral%20W eb%20Docu- ments/EMR_Wire less ...

  • Emerson 00809-0100-4102 - page 153

    ...

  • Emerson 00809-0100-4102 - page 154

    Reference Manual 00809-0100-4102, Rev AA May 2013 St andard T erms and C onditions of Sale can be found at www .rosem ount.com/terms_of_sale The Em erso n lo go is a t rad emar k a nd ser v ice m ar k of Em er son E le c tric Co. Ro semoun t. the Ros emount logo t ype, and S MART F AMIL Y are regis tered tra demarks of R osem ount Inc. Co planar is ...

Manufacturer Emerson Category Sleep Apnea Machine

Documents that we receive from a manufacturer of a Emerson 00809-0100-4102 can be divided into several groups. They are, among others:
- Emerson technical drawings
- 00809-0100-4102 manuals
- Emerson product data sheets
- information booklets
- or energy labels Emerson 00809-0100-4102
All of them are important, but the most important information from the point of view of use of the device are in the user manual Emerson 00809-0100-4102.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Emerson 00809-0100-4102, service manual, brief instructions and user manuals Emerson 00809-0100-4102. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Emerson 00809-0100-4102.

Similar manuals

A complete manual for the device Emerson 00809-0100-4102, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Emerson 00809-0100-4102 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Emerson 00809-0100-4102.

A complete Emerson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Emerson 00809-0100-4102 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Emerson 00809-0100-4102, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Emerson 00809-0100-4102, that we can find in the current document
3. Tips how to use the basic functions of the device Emerson 00809-0100-4102 - which should help us in our first steps of using Emerson 00809-0100-4102
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Emerson 00809-0100-4102
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Emerson 00809-0100-4102 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Emerson 00809-0100-4102?

Use the form below

If you did not solve your problem by using a manual Emerson 00809-0100-4102, ask a question using the form below. If a user had a similar problem with Emerson 00809-0100-4102 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)