Manual Sears SRCD227

64 pages 1.32 mb
Download

Go to site of 64

Summary
  • Sears SRCD227 - page 1

    COLOR TV/D VD/VHS SRCD223 (23 inc h) SRCD227 (27 inc h) O WNER’S MANU AL As an E NERGY S TAR Partner, our company has determined that this product meets the E NERGY S TAR guidelines for energy efficiency. E NERGY S TAR is a U.S. registered mark. ® ® ® If you need additional oper ating assistance after reading this owner’ s ma n ual, please c ...

  • Sears SRCD227 - page 2

    1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed W arnings -All warnings on the appliance and in the operating instructions should be adhered to. 4.Follow Instructions- All opera ...

  • Sears SRCD227 - page 3

    - 3 - EN 1B15 13.Outdoor Antenna gr ounding- If an outside antenna or cable system is connected to the TV/DVD/VHS, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFP A No. 70, provides information with respect to p ...

  • Sears SRCD227 - page 4

    - 4 - EN 1B15 RADIO-TV INTERFERENCE This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio fr ...

  • Sears SRCD227 - page 5

    - 5 - EN 1C29 A V OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE LOCA TION For safe operation and satisfactory performance of your TV/DVD/VHS, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • A void dusty or humid places. • A void places wit ...

  • Sears SRCD227 - page 6

    - 6 - EN 1C29 T ABLE OF CONTENTS C IMPORT ANT SAFEGUARDS . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . .4 LOCA TION . . . . . . . . . . . . . . . . . . .5 A VOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE .5 W ARNING . . . . . . . . . . . . . . . . . . . .5 C FEA TURES . . . . . . . . . . . . . . . . . . . .7 C OPERA TING CONTROLS AND FUNCTI ...

  • Sears SRCD227 - page 7

    - 7 - EN 1C29 • Hi-Fi system – The Hi-Fi stereo recording system offers you excellent sound quality with a dynamic range of 80dB, frequency response from 20Hz to 20kHz, and 0.005% wow and flutter . • Rotary 4-head Record/Playbac k System – Four heads ensure excellent picture quality and special ef fects playback. • Index Sear ch – Fast- ...

  • Sears SRCD227 - page 8

    - 8 - EN 1C29 DV D ¡ Dolby Digital surr ound This player can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder . ¡ Still/fast/slow/step pla yback V arious playback modes are available including still pic- tures, fast forward/reverse, slow motion and step frames. ¡ Random playbac k for audio CD and ...

  • Sears SRCD227 - page 9

    - 9 - EN 1C29 OPERA TING CONTROLS AND FUNCTIONS 6. OPEN/CLOSE button [DVD P .37] Press to insert discs into or remove them from the tray . 7. Disc loading tray 8. D VD indicator Lights on during DVD mode. 9. SELECT button Press to change to TV/VCR mode or DVD mode. NOTE: For about 4 seconds just after the DVD mode has switched to the TV mode, the b ...

  • Sears SRCD227 - page 10

    - 10 - EN 1C29 20. A UDIO L/R input jacks Connect to the audio output jacks of a video camera or VCR. T o access the front A/V input see ITEM 1 1 or ITEM 23. 21. Cassette compartment 22. PICTURE button Press to adjust the picture. 23. Number buttons TV Mode: [P .15] Press two digits to directly access the desired channel. Remember to press a " ...

  • Sears SRCD227 - page 11

    - 11 - EN 1C29 CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SA TELLITE BOX If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the ilustration. By using this connection you can also record scram- bled channels. However , channel selection must be made with the converter box ...

  • Sears SRCD227 - page 12

    - 12 - EN 1C29 TO RECORD A SCRAMBLED/UNSCRAM- BLED CHANNEL 1. Set the TV/DVD/VHS channel selector to the out- put channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2.Select the channel to record from your Cable Converter Box or Satellite Box. INST ALLING THE BA TTERIES 1)Open the battery compartment cover by pressing the cover on the r ...

  • Sears SRCD227 - page 13

    - 13 - EN 1C29 CONNECTING TV/DVD/VHS TO AUDIO SYSTEM ANT. L AUDIO OUT R COAXIAL 1 T o Right (red) and Left (white) A UDIO OUT jacks Stereo system T o ANALOG A UDIO INPUT jacks • Using industry standard audio patch cords, connect one end to the Audio Output Left (white) and Right (red) jacks on the rear of the TV/DVD/VCR, and the other end to the ...

  • Sears SRCD227 - page 14

    - 14 - EN 1C29 CONNECTING T O A DOLBY DIGIT AL DECODER, DTS DECODER, OR MPEG DECODER (for DVD) If using this TV/DVD/VHS to play back a TV/DVD/VHS in a 5.1 channel Dolby Digital surround, DTS sur- round, or MPEG surround format, the TV/DVD/VHS outputs a Dolby Digital, DTS, or MPEG data stream from its COAXIAL DIGIT AL AUDIO OUT jack. By hooking the ...

  • Sears SRCD227 - page 15

    - 15 - EN 1C29 SET UP FOR USE Y ou can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/DVD/VHS channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed ...

  • Sears SRCD227 - page 16

    - 16 - EN 1C29 CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/DVD/VHS. 1 Select “ CHANNEL SET UP ” Press the SETUP button on the remote control. Press the Arrow K or L button to point to “ CHANNEL SET UP ” . Then, press the Arrow B button. 2 Begin auto preset Press the Arrow K or L button to point to “ AUT ...

  • Sears SRCD227 - page 17

    - 17 - EN 1C29 CLOCK SET UP (AUTO / MANUAL) Set the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is available in your area, follow “ AUTO CLOCK SET- TING ” . If it is not, follow “ MANUAL CLOCK SET- TING ” . AUTO CLOCK SETTING Y ou can have the TV/DVD/VHS set the clock auto- matically by us ...

  • Sears SRCD227 - page 18

    - 18 - EN 1C29 MANUAL CLOCK SETTING Make sure ... • TV/DVD/VHS power must be turned on. In the example below , the clock is to be set to: DA TE May 7th, 2002 SETTING TIME 5:40PM 1 Select “ SETTING CLOCK ” Press the SETUP button on the remote control. Press the Arrow K or L button to point to “ SETTING CLOCK ” . Then, press the Arrow B but ...

  • Sears SRCD227 - page 19

    - 19 - EN 1C29 TV OPERA TION W A TCHING A TV PROGRAM 1 T urn on the TV/D VD/VHS Press the POWER button to turn on the TV/DVD/VHS. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control. Remember: If the TV/DVD/VHS is connected to a cable box or satellite bo ...

  • Sears SRCD227 - page 20

    - 20 - EN 1C29 CLOSED CAPTION SYSTEM Y ou can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dia- logue caption or text display . CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: By choosing the text mode, yo ...

  • Sears SRCD227 - page 21

    - 21 - EN 1C29 V -CHIP SET UP V -CHIP enables parents to prevent their children from watching inappropriate material on TV . V -CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program ’ s rating ...

  • Sears SRCD227 - page 22

    - 22 - EN 1C29 4 Select your desired item Press the Arrow K or L button to point to your desired item. Then, press the Arrow B button to select [BLOCK] or [VIEW]. • When you select the rating cate- gory and turn it [BLOCK], the higher rating will turn [BLOCK] automatically . Also, the lower rat- ing will turn [VIEW] automatically . • When you t ...

  • Sears SRCD227 - page 23

    - 23 - EN 1C29 MTS(Multi-Channel T elevision sound)SYSTEM Y ou can record or listen to a program in MTS stereo. CHECKING THE SELECTED MTS MODE When you play a VHS tape, or receive a broadcast on the TV/DVD/VHS tuner channel you are watching, the status shown below will appear when you press the DISPLA Y button on the remote control. PLA Y B 12:00AM ...

  • Sears SRCD227 - page 24

    - 24 - EN 1C29 SELECTING THE MTS SYSTEM Make sure ... • TV/DVD/VHS power must be turned on. TO SELECT HIFI MODE 1 Select “ USER ’ S SET UP ” Press the SETUP button on the remote control. Press the Arrow K or L button to point to “ USER ’ S SET UP ” . Then, press the Arrow B button. 2 Select “ VCR A UDIO ” Press the Arrow K or L bu ...

  • Sears SRCD227 - page 25

    - 25 - EN 1C29 VIDEO CASSETTE This TV/DVD/VHS will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. REMOVING A CASSETTE 1)In the Stop mode, press the EJECT button on the remote control or press the STOP/EJECT button on the TV/DVD/VHS. The cassette wi ...

  • Sears SRCD227 - page 26

    - 26 - EN 1C29 PLA YBACK NORMAL PLA YBACK Make sure ... • TV/DVD/VHS power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, the TV/DVD/VHS will start playback automatically . 2 T o begin playbac k Press the PLA Y button. 3 T o stop playbac k Press the STOP button when play- back is completed. NOTES: • ...

  • Sears SRCD227 - page 27

    - 27 - EN 1C29 SPECIAL PLA YBACK This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 Select “ USER ’ S SET UP ” Press the SETUP button on the remote control. Press the Arrow K or L button to point to “ USER ’ S SET UP ” . Then, press the Arrow B button. 2 Set “ RENT AL ” ...

  • Sears SRCD227 - page 28

    - 28 - EN 1C29 SEARCH Make sure ... • TV/DVD/VHS power must be turned on. • Insert a tape. This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape. 1 Stop a tape at your desired point Rewind or fast forward t ...

  • Sears SRCD227 - page 29

    - 29 - EN 1C29 INDEX SEARCH This feature provides a method of indexing the start- ing point so that it can be easily returned to in either fast forward or rewind mode. • The index mark will be made automatically when the REC button is pressed. It will also be marked at the starting point of T imer recording and OTR. • The index mark will not be ...

  • Sears SRCD227 - page 30

    - 30 - EN 1C29 RECORDING Make sure ... • TV/DVD/VHS power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: • This unit will ONL Y record and view the same channel. • This unit cannot record the conten ...

  • Sears SRCD227 - page 31

    - 31 - EN 1C29 This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/DVD/VHS. Make sure ... • TV/DVD/VHS power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.) NOTES ...

  • Sears SRCD227 - page 32

    - 32 - EN 1C29 TIMER Y ou may set the TV/DVD/VHS to start and end a recording while you are away . Y ou can set 8 pro- grams to record on specific days, daily or weekly within a 1 year period. In the example below , the timer is being set to r ecord: DA TE: July 6th, 2001 SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61 T APE SPEED: SP Make sure . ...

  • Sears SRCD227 - page 33

    - 33 - EN 1C29 T o shift the time schedule of an automatic timer recording. 1)Press the POWER button. 2)Repeat step [1] on page 32. 3)Press the RECORD button and select the desired program using the Arrow K or L button. 4)Press the RECORD button again. Each additional push will shift forward the begin/end time for recording by 10 minutes. When the ...

  • Sears SRCD227 - page 34

    - 34 - EN 1C29 TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the REC indicator goes off. 2)Press the SETUP button on the remote control. 3)Confirm “ TIMER PROGRAMMING ” is pointed. 4)Press the Arrow B button. The details of programs appear on the TV screen. 5)Press the SETUP button on the remote control to return to TV mode. HINT ...

  • Sears SRCD227 - page 35

    - 35 - EN 1C29 ON SCREEN DISPLA Y T o check the Counter , Clock and Channel number on the TV screen, press the DISPLA Y button on the remote control. Each time you press the DISPLA Y button on the remote control, the TV screen will change as follows: When the Closed Caption mode is OFF: • Counter mode: After 5 seconds, only the counter remains. T ...

  • Sears SRCD227 - page 36

    – 36 – EN 01A1 1 D VD SECTION ABOUT THE DISCS The following discs can be played back on this DVD player . This player conforms to the NTSC color system. Y ou can- not play discs recorded in other color systems such as P AL or SECAM. ¡ Some discs include region codes as shown below . ¡ The number inside the symbol refers to a region of the wor ...

  • Sears SRCD227 - page 37

    – 37 – EN 01A1 1 USING THE TITLE MENU W ith a DVD containing a title menu, you can select desired titles from the menu. 1 Press the TITLE button. ¡ The title menu will appear . 2 Select the desired title. ¡ Press the arrow buttons ( L / K / B / s ) to change the setting, and then press the ENTER button. CALLING UP A MENU SCREEN DURING PLA YBA ...

  • Sears SRCD227 - page 38

    1 Press the ST OP b utton during playbac k. ¡ Playback will stop, and then appear the resuming message at the center . 2 Press the PLA Y button. Playbac k will start from the point where the pre vious playbac k session was stopped. Notes ¡ Resuming playback is not available with some discs. ¡ It is possible to switch from the DVD play mode to th ...

  • Sears SRCD227 - page 39

    – 39 – EN 01A1 1 1 Press the numeric buttons to enter the desired track n umber . ¡ The selected track will be located, and playback will start. Y ou can also press the SEARCH MODE button, use the numeric buttons to enter the track number . When the track number is entered in the entry box, playback of the desired track will start automaticall ...

  • Sears SRCD227 - page 40

    – 40 – EN 01A1 1 REPEA T 1 Press the REPEA T button. For DVDs ¡ A single title or chapter is played back repeatedly . ¡ Pressing the REPEA T button cycles the display on the screen as follows. For audio CDs ¡ The whole disc or a single track is played back repeatedly . ¡ Pressing the REPEA T button cycles the display on the screen through O ...

  • Sears SRCD227 - page 41

    – 41 – EN 01A1 1 PROGRAM (Audio CD) 1 Press the MODE button in stop mode. ¡ The program screen will appear . CD PROGRAM TIME 0:00:00 2/2 RANDOM : MODE EXIT : RETURN START: PLAY DELETE : CLEAR -- 2 Press the numeric buttons to enter the desired track n umbers. ¡ 50 programs can be displayed at once on the screen. Press “ L ” to go to the n ...

  • Sears SRCD227 - page 42

    – 42 – EN 01A1 1 Note ¡ Zooming function does not work while disc menu is shown. ZOOM PLA YBACK (enlargement onscreen) Images can be enlarged four times on the screen to your taste. 1 Press the ZOOM button during pla yback. ¡ An image will be enlarged at the center of the screen. ¡ Press the ZOOM button again, and the image will be back to t ...

  • Sears SRCD227 - page 43

    1 Press the MODE button in ST OP mode . ¡ The program screen shows up. MP3 1 Press the SEARCH MODE button during pla y- back. ¡ The SEARCH menu shows up. ¡ A track currently in play or under RESUME ON will be highlight- ed. In the case of RESUME OFF , the first track of the disc will be highlighted. ¡ Press the RETURN button, and the SEARCH men ...

  • Sears SRCD227 - page 44

    – 44 – EN 01A1 1 SETTINGS CHANGING THE AUDIO LANGUAGE OR SOUND MODE The DVD player has a function which allows you to select the desired audio language and sound mode. For DVDs Press the A UDIO button during playbac k, and then press the A UDIO button to select the desired audio language. ¡ The audio language can be changed if multiple languag ...

  • Sears SRCD227 - page 45

    – 45 – EN 01A1 1 CHANGING THE SUBTITLE LANGUAGE The DVD player has a function which allows you to select the desired language for subtitles. 1 Press the SUBTITLE button during pla ybac k, and then press the SUBTITLE b utton to select the desired subtitle language. ¡ The subtitle language can be changed if the subtitles are recorded in multiple ...

  • Sears SRCD227 - page 46

    Y ou can enjoy stereophonic sound system when you playback Dolby Digital and PCM 48kHz sound. 1 Press the MODE button twice during pla yback. ¡ The setup screen will appear . 2 Press the ENTER button to set it on or off . ON : T ruSurround ON.(Default : OFF) OFF : T ruSurround OFF . ¡ Press the DISPLA Y button or the RETURN button to exit the dis ...

  • Sears SRCD227 - page 47

    – 47 – EN 01A1 1 1 Press the SETUP button in ST OP mode . ¡ The setup screen appears. 2 Press the K / L buttons to select Langua ge, and then press the ENTER button. 3 Press the K / L buttons to select an item, and then press the ENTER button. AUDIO: (V oice is played back in selected language.) SUBTITLE: (Subtitles are shown in selected langu ...

  • Sears SRCD227 - page 48

    1 Press the SETUP button in ST OP mode . ¡ The setup screen will appear . 2 Press the K / L buttons to select DISPLA Y and then press the ENTER button. 3 Press the K / L buttons to select an item, and then press the ENTER button. TV MODE (Default : 4:3 LETTER BOX) 4:3 LETTER BOX : W ide screen with black bars on top and bottom 4:3 P AN & SCAN ...

  • Sears SRCD227 - page 49

    – 49 – EN 01A1 1 1 Press the SETUP button in ST OP mode . ¡ The setup screen will appear . 2 Press the K / L buttons to select A udio and then press the ENTER button. 3 Press the K / L buttons to select an item, and then press the ENTER button. DRC (Def ault : OFF) On : DRC (Dynamic Range Control) ¡ This function is for controlling the range ...

  • Sears SRCD227 - page 50

    1 Press the SETUP button. ¡ The setup screen will appear . 2 Press the K / L buttons to select P ARENT AL, and then press the ENTER button. 3 Press the numeric b uttons to enter the 4- digit passw ord, and then press the ENTER button. ¡ When doing this for the first time, enter any 4 digits. (except for 4737) That number will be used as the passw ...

  • Sears SRCD227 - page 51

    – 51 – EN 01A1 1 LANGUAGE CODE LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 No. Language Country code Af ar Abkhazian Afrikaans Amharic Arabic Assamese A ymara Azerbaijani Bashkir Byelorussia ...

  • Sears SRCD227 - page 52

    – 52 – EN 01A1 1 Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money . TV/VCR TROUBLESHOOTING GUIDE PROBLEM CORRECTIVE ACTION No power . • Make sure the AC cord is connected to an AC outlet. ? ...

  • Sears SRCD227 - page 53

    – 53 – EN 01A1 1 CLOSED CAPTION PROBLEM POSSIBLE REMEDY My TV/DVD/VHS is showing • Y ou are watching a live broadcast and spelling errors made by the captions that are misspelled. • closed captioning production company may pass through uncorrected. • A prerecorded program will not show any misspelled words because • of the normal time a ...

  • Sears SRCD227 - page 54

    – 54 – EN 01A1 1 Symptom Cause Remedy No power . • Loose power plug. • Insert the power plug firmly into the wall out let The player does not • The remote control is not aimed • Aim the remote control directly at the sensor respond to the • at the sensor on the TV/DVD. • on the TV/DVD. remote control. • Obstacles present between t ...

  • Sears SRCD227 - page 55

    – 55 – EN 01A1 1 EN 01A1 1 CABINET CLEANING • W ipe the front panel and other exterior surfaces of the TV/DVD with a soft cloth immersed in luke- warm water and wrung dry . • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV/DVD. Such chemicals may cause damage and discoloration to the exposed surfaces. AUTO HEAD ...

  • Sears SRCD227 - page 56

    – 56 – EN 01A1 1 CR T [23 inch model] : 23 inch in-line gun, 90 ˚ deflection tube [27 inch model] : 27 inch in-line gun, 1 10 ˚ deflection tube T elevision system : NTSC-M Closed caption system : § 15.1 19/FCC V ideo Heads : Rotary four-head T ape width : 1/2 inch T ape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 1 1.12mm/sec. T uner cha ...

  • Sears SRCD227 - page 57

    – 57 – EN 01A1 1 MEMO TD530/601_36-55 02.4.5 6:34 PM Page 57 ...

  • Sears SRCD227 - page 58

    – 58 – ES 1D18 INDICE ■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 58 P ANEL FRONT AL DEL televisor/DVD/VHS . . . . . . . . . 58 MANDO A DIST ANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 58 VIST A POSTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 ■ PREP ARACIÓN P ARA LA UTILIZACIÓN . . . . . . . . . . 60 C ...

  • Sears SRCD227 - page 59

    – 59 – ES 1D18 23. Botones de númer os Modo del televisor: Pulse dos dígitos para tener acceso directamente al canal deseado. Recuerde pulsar "0" antes de elegir un canal de un solo dígito. Botón +100 Púlselo para seleccionar canales de televisión por cable cuyo número sea igual o superior al 100. Modo D VD: Púlselo para intro ...

  • Sears SRCD227 - page 60

    – 60 – ES 1D18 fuente a las tomas AUDIO L/R y VIDEO de este tele- visor/DVD/VHS. Y luego pulse el botón SELECT hasta que "VIDEO" aparezca en la pantalla. NOT A: • Cuando conecte una videograbadora monoaural (otra fuente) a este televisor/DVD/VHS, conecte la toma de salida de audio de la videograbadora monoaural (otra fuente) a la t ...

  • Sears SRCD227 - page 61

    – 61 – ES 1D18 Fabricado bajo licencia de Dolb y Laboratories. “Dolby” y el símbolo de la D doble son mar cas de fábrica de Dolby Laboratories. T rabajos confidenciales sin publicar . “DTS” y “DTS Digital Out” son marcas de fábrica de Digital Theater Systems, Inc. NOT AS: • La fuente de audio de un disco del formato de sonido a ...

  • Sears SRCD227 - page 62

    – 62 – ES 1D18 1 Conecte el cable de alimentación a una toma de CA convencional. NOT A: Si aparecen algunos dígitos en la esquina de la pantalla, pulse el botón POWER sin des- enchufar el cable de alimentación. 2 Pulse el botón POWER para encender el televisor/DVD/VHS. 3 Seleccione "ESP AÑOL" o "ENGLISH" (inglés), &qu ...

  • Sears SRCD227 - page 63

    – 63 – ES 1D18 REPRODUCCIÓN DE UN DVD DE VÍDEO O UN CD DE AUDIO P ara empezar Conecte la alimentación del televisor , amplificador y cualquier otro componente que esté conectado al reproductor DVD. (Cambie el sistema de entrada para adaptarlo al reproductor DVD, y compruebe que el volumen del sonido sea correcto.) 1 Pulse el botón PO WER. ...

  • Sears SRCD227 - page 64

    Printed in Malaysia 0EMN01969 TD530UA/601UB ★★★★★ FULL 90 D A Y W ARRANTY F or 90 da ys from the date of purchase, Sears will repair an y def ect in material or workmanship in this TV , free of charge. F or one y ear from the date of purchase, SEARS will supply at no charge , replacement f or def ective parts. T wo (2) years f or Picture ...

Manufacturer Sears Category TV DVD Combo

Documents that we receive from a manufacturer of a Sears SRCD227 can be divided into several groups. They are, among others:
- Sears technical drawings
- SRCD227 manuals
- Sears product data sheets
- information booklets
- or energy labels Sears SRCD227
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sears SRCD227.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sears SRCD227, service manual, brief instructions and user manuals Sears SRCD227. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sears SRCD227.

Similar manuals

A complete manual for the device Sears SRCD227, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sears SRCD227 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sears SRCD227.

A complete Sears manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sears SRCD227 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sears SRCD227, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sears SRCD227, that we can find in the current document
3. Tips how to use the basic functions of the device Sears SRCD227 - which should help us in our first steps of using Sears SRCD227
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sears SRCD227
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sears SRCD227 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sears SRCD227?

Use the form below

If you did not solve your problem by using a manual Sears SRCD227, ask a question using the form below. If a user had a similar problem with Sears SRCD227 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)