Manual Generac 1292-2

20 pages 1.25 mb
Download

Go to site of 20

Summary
  • Generac 1292-2 - page 1

    High Pressure W asher Owner’ s Manual This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. 230 0 PSI Model No. 1292-2 (2300 PSI High Pressure W asher) Manual No. B5715 Revision 2 (8/3/2000) Visit our Generac website: w w w ...

  • Generac 1292-2 - page 2

    Generac Portable Product s 2,300 PSI High Pressure W asher 2 EQUIPMENT DESCRIPTION CONGRA TULA TIONS on your purchase of a GENERAC high pressure washer . It has been designed, engineered and manufactured to give you the best possible dependability and performance. This manual contains information for a high pressure washer that operates at 2,300 PS ...

  • Generac 1292-2 - page 3

    Generac Portable Product s 2,300 PSI High Pressure W asher 3  Operate engine only at governed speed. Running the engine at excessive speeds increases the hazard of personal injury . Do Not tamper with parts which may change the governed speed.  Do Not wear loose clothing, jewelry or anything that may be caught in the starter or other rotating ...

  • Generac 1292-2 - page 4

    Generac Portable Product s 2,300 PSI High Pressure W asher 4 KNOW YOUR PRESSURE W ASHER Read this owner  s manual and safety rules before operating your high pressure washer . Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future refere ...

  • Generac 1292-2 - page 5

    Generac Portable Product s 2,300 PSI High Pressure W asher 5 W ARNING! Read entire owner s manual before you attempt to assemble or operate your new pressure washer . REMOVE PRESSURE W ASHER FROM CARTON  Remove the high pressure hose and part s box included with pressure washer .  Slice two corners at the end of carton from top to bottom s ...

  • Generac 1292-2 - page 6

    Generac Portable Product s 2,300 PSI High Pressure W asher 6 NOTE : It may be necessary to move the handle supports from side to side in order to align the handle so it will slide over the handle supports.  Insert the carriage bolts through the holes on the handle and attach the plastic knobs. T ighten the knobs by hand (Figure 3).  Attach si ...

  • Generac 1292-2 - page 7

    Generac Portable Product s 2,300 PSI High Pressure W asher 7  Install the fuel cap and wipe up any spilled gasoline. Connect Hose and W ater Supply to Pump IMPORT AN T : Y ou must assemble the nozzle extension to the spray gun and attach all hoses before you start the engine. S tarting engine without all hoses connected and water supplied will d ...

  • Generac 1292-2 - page 8

    Generac Portable Product s 2,300 PSI High Pressure W asher 8  Check to make sure that there are no kinks, cuts, or damage to the high pressure hose.  Check that oil has been added to the proper level in the engine crankcase.  Add the proper gasoline to fuel tank.  Provide a proper water supply (not to exceed 140°F) at an adequate flow ...

  • Generac 1292-2 - page 9

    Generac Portable Product s 2,300 PSI High Pressure W asher 9 How to Use the Adjust able Nozzle Y ou now should know how to ST ART your pressure washer and how to STOP it. The information in this section will tell you how to adjust the spray pattern and to apply detergent or other cleaning chemicals. DANGER! Never adjust spray pattern when spraying. ...

  • Generac 1292-2 - page 10

    Generac Portable Product s 2,300 PSI High Pressure W asher 10 Applying Detergent with the Adjust able Nozzle IMPORT AN T : Use soaps designed specifically for pressure washers . Household detergents could damage the pump. IMPORT AN T : Y ou must attach all hoses before you start the engine. S tarting the engine without all the hoses connected and w ...

  • Generac 1292-2 - page 11

    Generac Portable Product s 2,300 PSI High Pressure W asher 11 SPECIFICA TIONS Outlet Pressure 2300 psi Flow Rate 2.9 gallons per minute (gpm) Detergent Use detergent approved for pressure washers W ater Supply Not to Exceed 140°F T emperature Automatic Cool Will cycle when water Down System reaches 140°-145°F GENERAL MAINTENANCE RECOMMENDA TIONS ...

  • Generac 1292-2 - page 12

    Generac Portable Product s 2,300 PSI High Pressure W asher 12  When the water supply is steady and constant, engage the safety latch. T o remove contaminant s from the pump, follow these step s:  Set up the pressure washer as described in Preparing Pressure W asher For Use (page 5). Connect the water supply and turn water on.  Remove ...

  • Generac 1292-2 - page 13

     Use the wire included in the kit (Figure 17) or a small paper clip to free the foreign material clogging or restricting the nozzle.  Remove additional debris by back flushing water through the nozzle extension (Figure 18). Back flush between 30 to 60 seconds. T urn the nozzle extension to stream spray and move the nozzle from low to high whi ...

  • Generac 1292-2 - page 14

    Generac Portable Product s 2,300 PSI High Pressure W asher 14 NOTES ...

  • Generac 1292-2 - page 15

    Generac Portable Product s 2,300 PSI High Pressure W asher 15 TROUBLESHOOTING Problem Ca use Corre ction Pump has following problems: failure to produc e pressure, er ratic pres sure, chattering, loss of pressur e, low wa te r v o lu me . 1. Nozzle in l ow pr essure m ode. 2. W ater inlet is blocked. 3. Inadequate water su ppl y. 4. Inlet hose is k ...

  • Generac 1292-2 - page 16

    Generac Portable Product s 2,300 PSI High Pressure W asher 16 EXPLODED VIEW  UNIT ...

  • Generac 1292-2 - page 17

    Generac Portable Product s 2,300 PSI High Pressure W asher 17 P ARTS LIST  UNIT Item Part # Qty . Description 1 AB5721 1 BASE 2 52858 8 LOCKNUT , M8 3 42909 2 HHCS, M8 1.25 x 30 4 50190 2 W ASHER, Flat .34" x 1" 5 27007 2 MOUNT , Donut T ype Vibration 7 B4099 1 DECAL, IMP . Purge Air 8 B2150 1 HOOK, Gun 9 B2516 1 CAP , Vinyl (black) 10 ...

  • Generac 1292-2 - page 18

    Generac Portable Product s 2,300 PSI High Pressure W asher 18 EXPLODED VIEW  PUMP 48 52 53 45 44 43 ...

  • Generac 1292-2 - page 19

    Generac Portable Product s 2,300 PSI High Pressure W asher 19 P ARTS LIST  PUMP Item Part # Qty Description 0 187264 0 Complete Pump Assy . 1 100B3699 1 Manifold 2 165B3169 6 O-ring 12.42 x 1.78 3 102B3699 6 V alve unit 4 103B3699 6 O-ring 5.60 x 1.78 5 104B3699 3 V alve cap 6 105B3699 1 Unloader valve screw 7 106B3699 3 O-ring 9.92 x 2.62 8 107 ...

  • Generac 1292-2 - page 20

    LIMITED PRESSURE W ASHER W ARRANTY GENERAC PORT ABLE PRODUCTS (hereafter referred to as the COMP ANY) warrants to the original ret ail purchaser , the pressure washer manufactured by the COMP ANY to be free from defect s in material and workmanship for the period(s) set forth below from the date of original purchase. This warranty is not transferab ...

Manufacturer Generac Category Pressure Washer

Documents that we receive from a manufacturer of a Generac 1292-2 can be divided into several groups. They are, among others:
- Generac technical drawings
- 1292-2 manuals
- Generac product data sheets
- information booklets
- or energy labels Generac 1292-2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Generac 1292-2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Generac 1292-2, service manual, brief instructions and user manuals Generac 1292-2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Generac 1292-2.

Similar manuals

A complete manual for the device Generac 1292-2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Generac 1292-2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Generac 1292-2.

A complete Generac manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Generac 1292-2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Generac 1292-2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Generac 1292-2, that we can find in the current document
3. Tips how to use the basic functions of the device Generac 1292-2 - which should help us in our first steps of using Generac 1292-2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Generac 1292-2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Generac 1292-2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Generac 1292-2?

Use the form below

If you did not solve your problem by using a manual Generac 1292-2, ask a question using the form below. If a user had a similar problem with Generac 1292-2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)