Manual Harbor Freight Tools 66098

13 pages 1.24 mb
Download

Go to site of 13

Summary
  • Harbor Freight Tools 66098 - page 1

    1600W HEA VY DUTY HEA T GUN Model 66098 SET UP AND OPERA TING INSTRUCTIONS Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright ...

  • Harbor Freight Tools 66098 - page 2

    Page 2 SKU 66098 For technical questions, please call 1-800-444-3353. SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures. Write the product’s seria l number in the back of the manua l near the assem bly diagr am (or month and year of purchase if product ...

  • Harbor Freight Tools 66098 - page 3

    Page 3 SKU 66098 For technical questions, please call 1-800-444-3353. A void body contact with grounded b. surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. Do not expose power tools to rain c. or wet conditions. Water entering a power tool will increase the risk of e ...

  • Harbor Freight Tools 66098 - page 4

    Page 4 SKU 66098 For technical questions, please call 1-800-444-3353. moving parts, breakage of parts and any other condition that may affect the power tool’ s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Keep cutting tools sharp and f. clean. Properly maintained cutti ...

  • Harbor Freight Tools 66098 - page 5

    Page 5 SKU 66098 For technical questions, please call 1-800-444-3353. Place drop clothes in the work area c. to catch any paint chips or peelings. Wear protective clothing such as extra work shirts, overalls and hats. Work in one room at a time. d. Furnishings should be removed or placed in the center of the room and covered. Work areas should be s ...

  • Harbor Freight Tools 66098 - page 6

    Page 6 SKU 66098 For technical questions, please call 1-800-444-3353. to cause burns during use and immediately afterwards. Do not use the Heat Gun on glass. 10. Do not use the Heat Gun as a hair 1 1. dryer or to heat up materials that can be damaged by high temperatures. Maintain labels and nameplates on 12. the tool. These carry important safety ...

  • Harbor Freight Tools 66098 - page 7

    Page 7 SKU 66098 For technical questions, please call 1-800-444-3353. GROUNDING TO PREVENT ELECTRIC SHOCK AND DEA TH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualied electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding pro ...

  • Harbor Freight Tools 66098 - page 8

    Page 8 SKU 66098 For technical questions, please call 1-800-444-3353. If you are using one extension cord 4. for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See T able A.) If you are using an extension cord 5. outdoors, make sure it is marked with the sufx “W-A” (“W” in Cana ...

  • Harbor Freight Tools 66098 - page 9

    Page 9 SKU 66098 For technical questions, please call 1-800-444-3353. SPECIFICA TIONS Electrical Requirements 120 V~ / 60 Hz / 13 A T emperature 1 100° F Maximum E179876 UNP ACKING When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight T ools at the number shown on t ...

  • Harbor Freight Tools 66098 - page 10

    Page 10 SKU 66098 For technical questions, please call 1-800-444-3353. leave the Heat Gun unattended while pointed at surfaces or objects. The Heat Gun can be used for: 8. Shrinking of shrink tubing, • packaging and electrical components. Deforming of articles made from • acrylic, PVC, and polystyrene tubing, plates, and proles as well as mo ...

  • Harbor Freight Tools 66098 - page 11

    Page 1 1 SKU 66098 For technical questions, please call 1-800-444-3353. MAINTENANCE AND SER VICING Procedures not specically explained in this manual must be performed only by a qualied technician. TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: T urn the Power Switch of the tool to its “OFF” position and unplug the tool from its ...

  • Harbor Freight Tools 66098 - page 12

    Page 12 SKU 66098 For technical questions, please call 1-800-444-3353. P ARTS LIST Part Description Qty 1 Nose Cone 1 2 Air Duct 1 3 Pad 1 4 Heat Element 1 5 Under Pan 1 6 Block 1 7 Knob 1 8 V ent Cover 1 9 Left Housing 1 10 Spring 1 11 End Stop 1 12 Nut 1 13 Fan 1 P ARTS LIST Part Description Qty 14 Motor 1 15 Cord Stop 1 1 16 Cord Stop 2 1 17 Pad ...

  • Harbor Freight Tools 66098 - page 13

    Page 13 SKU 66098 For technical questions, please call 1-800-444-3353. LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materials and workmanship for the period of 90 days f ...

Manufacturer Harbor Freight Tools Category Heat Gun

Documents that we receive from a manufacturer of a Harbor Freight Tools 66098 can be divided into several groups. They are, among others:
- Harbor Freight Tools technical drawings
- 66098 manuals
- Harbor Freight Tools product data sheets
- information booklets
- or energy labels Harbor Freight Tools 66098
All of them are important, but the most important information from the point of view of use of the device are in the user manual Harbor Freight Tools 66098.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Harbor Freight Tools 66098, service manual, brief instructions and user manuals Harbor Freight Tools 66098. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Harbor Freight Tools 66098.

A complete manual for the device Harbor Freight Tools 66098, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Harbor Freight Tools 66098 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Harbor Freight Tools 66098.

A complete Harbor Freight Tools manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Harbor Freight Tools 66098 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Harbor Freight Tools 66098, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Harbor Freight Tools 66098, that we can find in the current document
3. Tips how to use the basic functions of the device Harbor Freight Tools 66098 - which should help us in our first steps of using Harbor Freight Tools 66098
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Harbor Freight Tools 66098
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Harbor Freight Tools 66098 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Harbor Freight Tools 66098?

Use the form below

If you did not solve your problem by using a manual Harbor Freight Tools 66098, ask a question using the form below. If a user had a similar problem with Harbor Freight Tools 66098 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)