English dropdown-ico

Manual Nilfisk-ALTO 05210G

68 pages 3.71 mb
Download

Go to site of 68

Summary
  • Nilfisk-ALTO 05210G - page 1

    Form No. 70935A 1 1/07, Revised 12/09 Printed in the U.S.A. SCRUBTEC 770 S SCRUBTEC 770 L SCRUBTEC 784 S SCRUBTEC 784 L SCRUBTEC 795 S SCRUBTEC 795 L U.S. Patent No. 6,760,947; No. 6,105,192; No. RE39,581 (Deluxe Machines) Operator's Manual MODELS: 05210F , 05210G, 0521 1F , 05220F , 05220G, 05221F 05230F , 05231F READ THIS MANUAL English (2-3 ...

  • Nilfisk-ALTO 05210G - page 2

    -2- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 READ THIS BOOK This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your Nil fi sk AL TO machine could result in injury to you or to ...

  • Nilfisk-ALTO 05210G - page 3

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 3 - OPERA T OR SAFETY INSTRUCTIONS DANGER! Failure to read and observe all DANGER statements could result in severe bodily injury or death. Read and observe all DANGER statements found in your Owner ’s Manual and on your machine. W ARNING! Failure to read and obs ...

  • Nilfisk-ALTO 05210G - page 4

    -4- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 OPERA T OR SAFETY INSTRUCTIONS W ARNING! Electrical components of this machine can “short-out” if exposed to water or moisture. Keep the electrical components of the machine dry . Wipe the machine down after each use. For storage, keep the machine in a dry bu ...

  • Nilfisk-ALTO 05210G - page 5

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 5 - INTRODUCTION Nil fi sk AL TO’ s newly designed Scrubtec 795, 784 & 770 automatic scrubbers are ef fi cient and superior fl oor cleaning machines. The Scrubtec 795 uses two brushes or pads to scrub a path 97 cm wide. The Scrubtec 784 uses two brushes or ...

  • Nilfisk-ALTO 05210G - page 6

    -6- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 SPECIFICA TIONS: Model Scrubtec 795L Scrubtec 784L Scrubtec 770L Model Number 05231F 05221F 0521 1F Motor , V ac 1 HP (.74kw) three 1HP (.74kw) three 1HP (.74kw) three stage tangential stage tagential stage tagential discharge discharge discharge Power Supply 36 ...

  • Nilfisk-ALTO 05210G - page 7

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 7 - PROCEDURES FOR TRANSPORTING How T o Put The Machine In A V an Or T ruck W ARNING: The machine is heavy . Make sure you use two able persons to assist the machine in climbing the ramp. 1. Make sure the loading ramp is at least eight (8) feet long, and strong eno ...

  • Nilfisk-ALTO 05210G - page 8

    -8- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 SYMBOLS USED ON SCRUBTEC 770, 784, 795 SYMBOLS USED ON SCRUBTEC 770S, 784S, 795S / 770L, 784L, 795L Hazard Alert Symbol On/Off Key Switch Power T raverse Speed Control SYMBOLS USED ON SCRUBTEC 770S, 784S, 795S Additional Brush Pressure Brush Up/Down Solution Cont ...

  • Nilfisk-ALTO 05210G - page 9

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 9 - 71018A 71015A 71017A W ARNING READ OPERA TOR'S MANUAL BEFORE OPERA TING THIS MACHINE RISK OF FIRE • Use only com- mercially available fl oor cleaners and waxes intended for machine operation. • Do not use fl am- mable materials. RISK OF INJUR Y OR DA ...

  • Nilfisk-ALTO 05210G - page 10

    -10- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 MACHINE CONTROL P ANEL 770S, 784S & 795S Key Switch (See Figure #1, Item “A”) The key switch turns “ON” the power to the control panel. “0” is “OFF” and “I” is “ON”. T raverse Speed Switch (See Figure #1, Item “B”) The speed contr ...

  • Nilfisk-ALTO 05210G - page 11

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 1 1 - F G B F E C D A N I J K L M H1 H2 MACHINE CONTROL P ANEL 770S, 784S & 795S Figure #1 ...

  • Nilfisk-ALTO 05210G - page 12

    -12- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 MACHINE CONTROL P ANEL 770L, 784L & 795L Key Switch (See Figure #2 Item “A”) The key switch turns “ON” the power to the control panel. “O” is “OFF” and “I” is “ON”. T raverse Speed Switch (See Figure #2, Item “B”) The speed contro ...

  • Nilfisk-ALTO 05210G - page 13

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 13 - F G B F E C D A H I J K L M MACHINE CONTROL P ANEL 770L, 784L & 795L Figure #2 ...

  • Nilfisk-ALTO 05210G - page 14

    -14- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Position arrow indicating current position of squeegee (up or down) Indicators are on all the time showing current settings. Screens A vailable to Operator “Battery” blinks when low voltage occurs. W ater “droplets” off when solution is off and they are ...

  • Nilfisk-ALTO 05210G - page 15

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 15 - Figure #3a Figure #3b Figure #3c Figure #5 Figure #4 EN MACHINE CONTROLS & FEA TURES Squeegee Lift Handle (“S Class” models only) See Figure #3a, 3b, & 3c. The squeegee lift handle is located below the control handles on the right side. It is used ...

  • Nilfisk-ALTO 05210G - page 16

    -16- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Figure #6a Figure #6b 38722B 38722B 38722B 38720B 38720B 38722B 38720B 38722B 38722B HOW TO PREP ARE THE MACHINE FOR OPERA- TION How T o Install The Batteries The Scrubtec machines use six 6-volt batteries. The batteries are located in the battery compartment un ...

  • Nilfisk-ALTO 05210G - page 17

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 17 - Figure #7 Correct fi ll level HOW TO PREP ARE THE MACHINE FOR OPERA TION Battery Maintenance The electrical power to operate the machine comes from the storage batteries. Storage batteries need preventive maintenance. W ARNING! Working with batteries can be d ...

  • Nilfisk-ALTO 05210G - page 18

    -18- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Figure # 8 Figure 8A HOW TO PREP ARE THE MACHINE FOR OPERA TION How T o Charge The Batteries W ARNING! Charging the batteries in an area without adequate ventilation could result in an explosion. T o prevent an explosion, charge the batteries only in an area wit ...

  • Nilfisk-ALTO 05210G - page 19

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 19 - Figure #9 Figure #10 HOW TO PREP ARE THE MACHINE FOR OPERA TION How T o Install The Brushes Or Pad Drivers T o install the brushes or pad drivers on the machine, follow this procedure: 1. T urn the key switch “ON”. 2. Put the brush switch in the “UP” p ...

  • Nilfisk-ALTO 05210G - page 20

    -20- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 B A Figure #1 1 HOW TO OPERA TE THE MACHINE How to Operate the One T ouch System (“L Class” models only) One touch cleaning is a feature on the new Scrubtec W alk-behind Scrubber . The factory defaults for this setting are two bars of brush pressure and four ...

  • Nilfisk-ALTO 05210G - page 21

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 21 - Figure #14 Figure #12 Figure #13 Figure #15 Figure #16 HOW TO OPERA TE THE MACHINE How T o Operate the Squeegee (“S Class” models only) The squeegee wipes the fl oor while the vacuum motor removes the dirty solution from the fl oor . Use your right hand ...

  • Nilfisk-ALTO 05210G - page 22

    Figure # 17 Figure #18 Figure #19 Page -22- Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 HOW TO OPERA TE THE MACHINE How T o Traverse Machine NOTE: Put the machine in the slow traverse speed (see fi gure #17). Use the machine in an area that has no furniture and objects until you can do the following: 1. Move the machine in a ...

  • Nilfisk-ALTO 05210G - page 23

    Figure #20 Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 - 23 - HOW TO OPERA TE THE MACHINE How to Clean a V ery Dirty Floor T o clean a very dirty fl oor , follow this procedure: 1. Apply solution to the fl oor. 2. Do not lower the squeegee. 3. Do not activate the vacuum motor . 4. Lower the brushes and scrub the fl oor. 5. ...

  • Nilfisk-ALTO 05210G - page 24

    -24- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Figure #21 Figure #22 Figure #23 B A MAINTENANCE Do These Procedures When Y ou End Y our Work 1. Drain the solution tank (Figure #21, item A) and the recovery tank (Figure #21, item B). T o drain the tanks , follow this procedure: a. T urn the key switch “OFF? ...

  • Nilfisk-ALTO 05210G - page 25

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 25 - Figure #24 Figure #25 MAINTENANCE These Maintenance Procedures Must Be Done Every Week: W ARNING! Maintenance and repairs must be done by authorized personnel only . Always empty the solution tank and the recovery tank before doing any maintenance. Keep all fa ...

  • Nilfisk-ALTO 05210G - page 26

    -26- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Figure #26 Figure #27 Figure #28 MAINTENANCE 7. Check the squeegee and the scrub brushes or the pad drivers for damage. 8. Check the squeegee and the vacuum hose for damage, leaks and obstructions. Maintenance For The Squeegee T o remove the squeegee, follow thi ...

  • Nilfisk-ALTO 05210G - page 27

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 27 - Figure #29 Figure #30 Figure #31 A B 0.12" (3.0 mm) MAINTENANCE Adjusting Squeegee Blades When properly installed the front blade should be approximately .12 above the rear blade. See fi gure #29. W ARNING! Maintenance and repairs must be done by authori ...

  • Nilfisk-ALTO 05210G - page 28

    -28- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 HOW TO CORRECT PROBLEMS IN THE MACHINE PROBLEM CAUSE ACTION The machine does not remove all the water from the fl oor. The squeegee is up Lower the squeegee. The vacuum tank is full. Drain the tank. The screen fi lter is dirty . Clean the screen fi lter . The ...

  • Nilfisk-ALTO 05210G - page 29

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 29 - SCRUBTEC 770L / 784L / 795L WB Common Error Codes ERROR CODE CAUSE ACTION 3100 3101 3102 3103 3104 3105 Probable short circuit of output device. Check the traction, brush and vac motor connections on the trio and check wiring from these connectors down to the ...

  • Nilfisk-ALTO 05210G - page 30

    -30- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 ...

  • Nilfisk-ALTO 05210G - page 31

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 31 - Section II Parts and Service Manual (70935A) U.S. Patent No. 6,760,947; No. 6,105,192; No. RE39, 581 (Deluxe Machines) SCRUBTEC 770 S SCRUBTEC 770 L SCRUBTEC 784 S SCRUBTEC 784 L SCRUBTEC 795 S SCRUBTEC 795 L ...

  • Nilfisk-ALTO 05210G - page 32

    -32- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Solution T ank Assembly 12/09 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 12 19 20 24 21 22 23 25 27 26 47 21 24 45 21 28 29 31 31 30 30 32 46 33 34 35 36 37 38 40 39 41 42 43 44 ...

  • Nilfisk-ALTO 05210G - page 33

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 33 - Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Solution T ank Assembly 12/09 Item Ref. No. Qty Description 1 881317 6 Battery - 250 AH - 6 V olt 891384 6 Battery - 330 AH - 6 V olt 2 842406 3 Series Cable - 9” 3 40613A 1 Battery Cable, Black NOTE 1 4 40612A 1 Bat ...

  • Nilfisk-ALTO 05210G - page 34

    -34- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Recovery T ank Assembly 12/09 1 2 3 4 5 6 3 7 8 9 37 38 39 36 35 34 33 32 20 31 30 25 20 24 9 13 22 23 26 22 27 28 29 10 11 12 15 14 16 17 18 20 21 11 19 ...

  • Nilfisk-ALTO 05210G - page 35

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 35 - Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Recovery T ank Assembly 12/09 Item Ref. No. Qty Description 1 962798 1 Screw , 10-24 x 1/2 PN 2 30057A 1 Recovery Lid 3 920296 2 Nut, 10-24 ESNA 4 30065B 1 Gasket, Lid 5 38020A 1 Strap 6 962666 1 Screw , 10-24 x 3/4 PN ...

  • Nilfisk-ALTO 05210G - page 36

    -36- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 S / 784 S / 795 S Electrical Panel Assembly / Solo Speed Controller 12/09 43 38 51 42 41 44 45 46 54 40 39 47 48 49 50 52 54 36 37 5 34 33 35 26 5 53 18 21 20 16 5 6 13 12 7 11 10 9 5 30 14 15 5 29 27 28 32 18 17 31 18 5 25 24 23 20 ...

  • Nilfisk-ALTO 05210G - page 37

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 37 - Nil fi sk AL TO SCRUBTEC 770 S / 784 S / 795 S Electrical Panel Assembly / Solo Speed Controller 12/09 Item Ref. No. Qty Description 1 40838A 1 Cord, Charger NOTE1 2 61598A 1 Bracket, Cord W rap NOTE1 3 85391A 4 Screw , 1/4-20 x 5/8 PN 4 30594A 1 Rear Cover 5 ...

  • Nilfisk-ALTO 05210G - page 38

    -38- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 S / 784 S / 795 S Electrical Panel Assembly / I-Drive Speed Controller 12/09 ...

  • Nilfisk-ALTO 05210G - page 39

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 39 - Nil fi sk AL TO SCRUBTEC 770 S / 784 S / 795 S Electrical Panel Assembly / I-Drive Speed Controller 12/09 Item Ref. No. Qty Description 1 40838A 1 Cord, Charger NOTE 1 2 61598A 1 Bracket, Cord Wrap NOTE 1 3 85391A 4 Screw , 1/4-20 x 5/8 PN (QTY of 2 on models ...

  • Nilfisk-ALTO 05210G - page 40

    -40- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 L / 784 L / 795 L Electrical Panel Assembly Drawing 2/07 Drawing # 10855E 22 6 3 7 8 4 37 29 30 18 10 5 20 21 5 5 17 27 18 26 20 25 28 24 23 11 7 13 12 31 32 31 35 33 5 34 5 19 2 9 5 6 14 15 16 1 ...

  • Nilfisk-ALTO 05210G - page 41

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 41 - Nil fi sk AL TO SCRUBTEC 770 L / 784 L / 795 L Electrical Panel Assembly Parts List 2/07 Drawing # 10855E Item Ref. No. Qty Description 1 962798 1 Screw 2 87624A 2 W asher, Pulley 3 85391A 2 Screw , 1/4-20 x 5/8 PN 4 30626A 1 Rear Cover 5 81 104A 10 Nut, ESNA ...

  • Nilfisk-ALTO 05210G - page 42

    -42- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770L / 784L / 795L Control Panel Assembly 12/09 1 2 3 4 3 5 6 7 7 9 8 10 12 13 15 16 17 18A 18B 19 20 21 22 23 24 25 26 28 29 27 30 30 31 32 Item Ref. No. Qty Description 1 30592A 1 Control Handle 2 85815A 2 Screw , 5/16-18 x 1 1/2 3 98 ...

  • Nilfisk-ALTO 05210G - page 43

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 43 - Nil fi sk AL TO SCRUBTEC 770S / 784S / 795S Control Panel Assembly / Solo Speed Controller 12/09 Item Ref. No. Qty Description 1 30592A 1 Control Handle 2 85815A 2 Screw , 5/16-18 x 1 1/2 3 980205 6 Washer , 5/16 Flat 4 85813A 4 Screw , 5/16-18 X 1 5 9201 10 ...

  • Nilfisk-ALTO 05210G - page 44

    -44- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770S / 784S / 795S Control Panel Assembly / I-Drive Speed Controller 12/09 ...

  • Nilfisk-ALTO 05210G - page 45

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 45 - Item Ref. No. Qty Description 1 30592A 1 Control Handle 2 85815A 2 Screw , 5/16-18 x 1 1/2 3 980205 6 Washer , 5/16 Flat 4 85813A 4 Screw , 5/16-18 X 1 5 9201 10 4 Nut, LK 5/16-18 6 52556A 1 Reverse Switch 7 40738A 1 Traverse Potentiometer “S” 8 50962A 1 K ...

  • Nilfisk-ALTO 05210G - page 46

    -46- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Squeegee Swing Arm Assembly 12/09 ...

  • Nilfisk-ALTO 05210G - page 47

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 47 - Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Squeegee Swing Arm Assembly 12/09 Item Ref. No. Qty Description 1 81303A 1 Nut, ¼-28 2 61679A 1 Cable, Lower 3 87625A 4 W asher,Nylon 1¼x¼x1/32 4 87623A 2 W asher , Nylon 1¼x¼x1/8 5 38021A 1 Strap 6 60678C 1 Pivot ...

  • Nilfisk-ALTO 05210G - page 48

    -48- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 / 784 Squeegee Assembly 12/09 ...

  • Nilfisk-ALTO 05210G - page 49

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 49 - Nil fi sk AL TO SCRUBTEC 770 / 784 Squeegee Assembly 12/09 Item Ref. No. Qty Description 10803KL Squeegee Asm. 1 25201B 2 Knob 2 34260B 1 Squeegee Gasket 3 81301A 2 Nut, 3/8-16 Jam SS 4 30048A 2 Wheel, Gide 4” Diam. 5 53185A 2 Ring, 3/8 ID Snap 6 60272B 1 C ...

  • Nilfisk-ALTO 05210G - page 50

    -50- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 795 Squeegee Assembly 12/09 ...

  • Nilfisk-ALTO 05210G - page 51

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 51 - Item Ref. No. Qty Description 10817KL 1 Squeegee Assy (STD) 1 25201B 2 Knob 2 34260B 1 Squeegee Gasket 3 81301A 2 Nut, Jam SS 4 60248A 2 Sleeve 5 30048A 2 Guide Wheel 6 81217A 2 Nut, 1/4-20 ESNA 7 80316A 2 Screw , ¼-20 x 1 Flat SS 8 38715A 2 Spacer (38) 9 627 ...

  • Nilfisk-ALTO 05210G - page 52

    -52- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 T raverse System Assembly 2/05 12 13 31 32 30 13 21 20 15 14 3 19 28 19 9 29 30 11 16 18 8 10 27 26 25 24 23 7 6 7 23 5 4 2 1 3 ...

  • Nilfisk-ALTO 05210G - page 53

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 53 - Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 T raverse System Assembly 2/05 Item Ref. No. Qty Description 1 66531A 1 Swing Arm Pin 2 83671 1 1 Hair Pin 3 81 104A 2 Nut, .25-20 ESNA 4 69877A 1 Swing Bracket 5 8581 1A 2 Screw , .312-18 x .75 6 57275A 1 Cable Pulley ...

  • Nilfisk-ALTO 05210G - page 54

    -54- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Brush Head Assembly Drawing 2/05 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 13 19 13 20 21 22 23 17 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 27 44 45 46 20 47 52 48 49 50 51 49 53 54 2 1 55 ...

  • Nilfisk-ALTO 05210G - page 55

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 55 - Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Brush Head Assembly Parts List 1 1/07 Item Ref. No. Qty Description 1 82501A 2 Pin 2 766780 2 Hair Pin 3 38723A 2 Nylon Spacer 4 52497A 1 Actuator & T ube Asm. (S) 52499A 1 Actuator & Tube Asm. (L) [ ] 40910a 1 ...

  • Nilfisk-ALTO 05210G - page 56

    -56- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Brush Motor #45036A 2/05 13 Seam Location 7 12 15 5 6 4 1 2 3 14 16 17 12 13 Rotation 8 9 10 11 Item Ref. No. Qty Description 1 46734A 1 Stator Assembly (w/Magnets & Clips) 2 40318A 1 Armature Asm.(w/B.E. & F .E. ...

  • Nilfisk-ALTO 05210G - page 57

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 57 - Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Gear Box #54238A 2/05 9 8 7 6 5 4 3 2 1 Item Ref. No. Qty Description 1 57846A 1 Ring, Snap 2 507641 1 Seal, Oil, Small 3 52050A 1 Cap End 4 56668A 1 O’Ring 5 51 176A 1 Bearing, Large 6 58316A 1 Shaft & Gear , Ge ...

  • Nilfisk-ALTO 05210G - page 58

    -58- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Imperial T ransaxle Parts 2/05 PN 591 16A To replace coupler remove these two screws (Black) to separate the motor from gearbox to allow access to coupler PERMANENT MAGNET MOTOR MFG. IN USA Model 4BC-2800 HP .50 RPM 1200 ...

  • Nilfisk-ALTO 05210G - page 59

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 59 - Item Ref. No. Qty Description Wheel Flange Kit (includes Flange, 1 10357A 2 Studs, Key , Snap Rings & Shims) 2 36508A 2 Rubber Mount 3 53374A 2 Axle Oil Seal 4 53375A 4 Axle Bearing 5 53376A 1 Short Axle 6 53377A 1 Output Gear 7 53378A 1 Input Plug 8 53379 ...

  • Nilfisk-ALTO 05210G - page 60

    -60- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 ACCESSORIES Description Part No. Power W and System Kit 10892A Soft Caster Asm. 52127A Drive Wheel, Foam Filled 59955A Imperial Electric Parking Brake Kit 10684B Clarke Battery Maintenance System (CBMS) 53390A Chemical Mixing System 1 1081A Chemical Mixing Syste ...

  • Nilfisk-ALTO 05210G - page 61

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 61 - Nil fi sk AL TO SCRUBTEC 770 S / 784 S / 795 S Electrical Schematic (Solo Controller) 9/05 ...

  • Nilfisk-ALTO 05210G - page 62

    -62- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 S / 784 S / 795 S Electrical Schematic (I-Drive Controller) 12/09 ...

  • Nilfisk-ALTO 05210G - page 63

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 63 - Nil fi sk AL TO SCRUBTEC 770 L / 784 L / 795 L Electrical Schematic 9/05 ...

  • Nilfisk-ALTO 05210G - page 64

    ...

  • Nilfisk-ALTO 05210G - page 65

    ...

  • Nilfisk-ALTO 05210G - page 66

    Overenstemmelseserklaering Declarati on de conformité Samsvarserklaering Declaration of conformity Verklaring van overeenstemming Vaatimust enmukaisuusvakuutus Konformitätserklärung Dichiarazione di conformità Atitikties deklaracija Declaración de conformidad Vastavussertifikaat Osv ě d č ení o shod ě Atbilst ī bas deklar ā cija Deklarac ...

  • Nilfisk-ALTO 05210G - page 67

    Nil fi sk AL TO reserves the right to make changes or improvements to its machine without notice. Always use genuine Nil fi sk AL TO Parts for repair . Nil fi sk AL TO LIMITED U.S. W ARRANTY This Nil fi sk AL TO Industrial/Commercial Product is warranted to be free from defects in materials and workmanship under normal use and service, when ope ...

  • Nilfisk-ALTO 05210G - page 68

    Division of Nil fi sk-Advance A/S Industrivej 1 9560 Hadsund Denmark T el.: (+45) 72 18 21 00 Fax: (+45) 72 18 21 1 1 E-mail: salg@nil fi sk-alto.dk E-mail: service@nil fi sk-alto.dk www .nil fi sk-alto.dk ...

Manufacturer Nilfisk-ALTO Category Carpet Cleaner

Documents that we receive from a manufacturer of a Nilfisk-ALTO 05210G can be divided into several groups. They are, among others:
- Nilfisk-ALTO technical drawings
- 05210G manuals
- Nilfisk-ALTO product data sheets
- information booklets
- or energy labels Nilfisk-ALTO 05210G
All of them are important, but the most important information from the point of view of use of the device are in the user manual Nilfisk-ALTO 05210G.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Nilfisk-ALTO 05210G, service manual, brief instructions and user manuals Nilfisk-ALTO 05210G. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Nilfisk-ALTO 05210G.

Similar manuals

A complete manual for the device Nilfisk-ALTO 05210G, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Nilfisk-ALTO 05210G by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Nilfisk-ALTO 05210G.

A complete Nilfisk-ALTO manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Nilfisk-ALTO 05210G - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Nilfisk-ALTO 05210G, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Nilfisk-ALTO 05210G, that we can find in the current document
3. Tips how to use the basic functions of the device Nilfisk-ALTO 05210G - which should help us in our first steps of using Nilfisk-ALTO 05210G
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Nilfisk-ALTO 05210G
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Nilfisk-ALTO 05210G in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Nilfisk-ALTO 05210G?

Use the form below

If you did not solve your problem by using a manual Nilfisk-ALTO 05210G, ask a question using the form below. If a user had a similar problem with Nilfisk-ALTO 05210G it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)