English dropdown-ico

Manual Siemens 5551

35 pages 2.56 mb
Download

Go to site of 35

Summary
  • Siemens 5551 - page 1

    EN Operating instructions FR Mode d’emploi ES Instrucciones de funcionamiento 5551 McFadden Avenue, Huntington Beach, CA 92649 866/447-4363 • BSH Home Appliance Corp. 2002 Litho in U.S.A. Siemens - Electrogeräte GmbH Code. 900025 5809 A ...

  • Siemens 5551 - page 2

    ...

  • Siemens 5551 - page 3

    Dear Customer , We thank and congratulate you on your choice. This practical, modern and functional appliance has been built with top quality materials. These materials have been subjected to thorough quality control in the manufacturing process, and meticulously tested in order for this appliance to meet your every need, achieving perfect cooking. ...

  • Siemens 5551 - page 4

    FOR YOUR SAFETY 3 Important information for installation and usage Important instructions For your safety Before set-up For appliance usage Gas burners Cooking tips Appropriate cooking utensils Home troubleshooting Installation instructions Fitting measurements Electrical connection Change of gas type: from natural gas to propane Convert the pressu ...

  • Siemens 5551 - page 5

    For your safety building. PLEASE READ THE INSTRUCTIONS BEFORE CONTINUING IMPORT ANT : Keep these instructions for the local electrical inspector to use. OWNER: Keep these instructions for future use. may result causing property damage, personal injury or death. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of th ...

  • Siemens 5551 - page 6

    and usage 1 - For safety reasons, do not allow the flames to extend beyond the edge of the cooking appliance. 2 - Remember that the appliance heats up when in use. Remember to use common sense. The absence of a flame does not mean that the appliance parts are no longer hot. 3 - For safety reasons, this appliance should 4 - Make sure the power suppl ...

  • Siemens 5551 - page 7

    For US installations only: This installation must comply with local Gas Code, ANSI Z 223.1/NFP A 54, current edition. If an external electrical source is used, the appliance must be electrically grounded in exists, the National Electrical Code ANSI/NFP A 70, current edition. For Canada installations only: The installation must comply with CAN 1- B1 ...

  • Siemens 5551 - page 8

    Important instructions Carefully read this Operation and Maintenance As its user , you are responsible for the proper maintenance and use of this appliance in your home. When using cooking appliances, the following basic safety precautions must be observed: • Ensure proper installation and service. Follow the installation instructions provided wi ...

  • Siemens 5551 - page 9

    • This appliance has been designed for the Spillovers will cause smoke and grease spills that can ignite. • Do not heat food containers without opening them. An accumulation of pressure can trigger the explosion of the container . • While cooking, adjust the burner control so of the pot or pan. Do not allow the flame to extend beyond it. to c ...

  • Siemens 5551 - page 10

    • T o reduce the risk of burns, ignition of inflammable materials and unintentional spills, point the handles of the utensils inward, so that they do not hang over adjacent working areas, handle of the pot or pan firmly , to prevent it from moving. cool before handling it. Prevent the formation of every use. • In order for the burners to ignite ...

  • Siemens 5551 - page 11

    Remove the packaging from the appliance and dispose of it as per local laws. Remember that there are other accessories in addition to packaging materials. Keep packaging materials Check the condition of the appliance before installing it, to ensure that it has suffered no damage during transport. its first start-up in compliance with the regulation ...

  • Siemens 5551 - page 12

    looks like This is what your new Cooktop Control knobs Large double flame Grates Burner up to 9.800 Btu/hr burner up to 20.000 Btu/hr Burner up to 3.900 Btu/hr 6.500 Btu/hr Burner up to 6.500 Btu/hr 10 Burner up to ...

  • Siemens 5551 - page 13

    The gas burners There are indications to show which burner each control knob operates. Fig. 1. T o light a burner , press the chosen control knob and turn it toward the left, holding it in the maximum setting for a few seconds until the burner is lit, then release it, and adjust to the desired setting. If it does not light, repeat the procedure. to ...

  • Siemens 5551 - page 14

    V ery high High Medium Low Cooking recommendations Large burner Rapid Semi-rapid Auxiliary Boiling, cooking, roasting, browning, "paellas" and Reheating and keeping food warm: ready and pre-cooked meals. omelettes and fried dishes. Rice, “bechamel” (sauce) Steaming: fish and vegetables. Steamed potatoes, fresh Reheating and keeping fo ...

  • Siemens 5551 - page 15

    Cooking warnings should not touch the sides of Do not cook without a lid, or if the lid moves, as this causes a partial energy loss. irregular bottoms as they lengthen cooking time and increase energy consumption. off-center over the burner , as tipping could result. the control knobs, which, once centered over the burner , could touch the knobs or ...

  • Siemens 5551 - page 16

    Advice on using the appliance Melted sugar and spilt foods that have a high sugar content should immediately be removed from the hotplate using the glass scraper . After washing the pan supports, dry them well before using them to cook again - if there are still any drops of water or damp patches left when you start cooking, they could damage the e ...

  • Siemens 5551 - page 17

    15 ...

  • Siemens 5551 - page 18

    Home troubleshooting Y ou do not always need to call the technical assistance service. In many cases, you can solve problems on your own. The following table contains useful advice. Important: Only authorized personnel from our T echnical Service can perfor m the necessary tasks relative to the gas and electrical systems. What's wrong? Cause P ...

  • Siemens 5551 - page 19

    Thoroughly follow the general safety instructions as well as the important information. Before using the appliance, an authorized technician must install and connect it. Additionally , this technician must ensure that the power supply and gas connections work properly . The technician performing the installation is responsible for the perfect opera ...

  • Siemens 5551 - page 20

    A D E C B F Fig. 1a The seal ensures that the entire work seepage. If this item has not been fitted in the factory , remove the pan supports and the gas burner covers and dif fusers from your cooking hob, adhesive appliance hob, Depending on the model, the clips and the may already be fitted; if this is the case, do not remove them under any circum ...

  • Siemens 5551 - page 21

    Connect the regulator Figure 3 (2) to the manifold Figure 3 (1) as shown by the arrow on the regulator , applying teflon to the threads. Connect the pressure regulator to the gas grid IMPORT ANT INFORMA TION Ensure that a bag containing component 2 is supplied with the appliance. If this component is missing, call our T echnical Service. Use the pa ...

  • Siemens 5551 - page 22

    IMPORT ANT INFORMA TION body of the burner . sealed. Figure 4. The adjustment of primary air must not be performed on these burners. From natural gas to propane It is necessary that all operations related with of our T echnical Service, and that the regulations in force, as well as the requisites of the gas companies, be followed. IMPORT ANT : Befo ...

  • Siemens 5551 - page 23

    Fig. 5 5 a 5 c 5 b X1 X2 X3 B) Changing the tips on the upper large double flame burner. following steps must be taken to remove both the glass panel and frames: 1 - Remove all the burners, caps, diffusers, 2 - Loosen the two screws on the rapid, semi- 3 - Loosen the three screws on the large double etc. Fig. 5 a. rapid and auxiliary burners. Fig. ...

  • Siemens 5551 - page 24

    K L Z L2 L1 M5 M2 M1 M3 M4 M5 Y M Fig N Fig O Fig W Screw in the new main burner tip, pushing the burner tip casing in the opposite direction with a 13 mm spanner. Loosen the holding screw Fig. L1 and set the regulating bushing of the air flow to the value indicated in the burner tip table.-Z- Tighten the locking screw. 7 - Changing the inner flame ...

  • Siemens 5551 - page 25

    Fig. 7 Fig. 8 Fig. 6 3 - It has a flexible rubber seal. Simply apply pressure with the tip of the screwdriver to release the thread toward the tap's adjusting Do not remove the disc seal. screw. Fig. 7. 4 - Adjust the by-pass screw . Fully tighten the by-pass screw . Fig. 8. Conversion of the 6” W .C. pres- sure regulator to 10” W .C. Remo ...

  • Siemens 5551 - page 26

    2 - Service visits to: • Correct the installation. Y ou are responsible limited warranty . IMPORT ANT INFORMA TION If you call the T echnical Service Department, please be sure to indicate: E - NR FD This information appears on the appliance W ARRANTY APPLICA TIONS CONSEQUENTIAL DAMAGES. Some states do not allow exclusion or limitation FOR REP AI ...

  • Siemens 5551 - page 27

    Cher/chère Client/e : Nous vous remercions et félicitons de votre choix. Cet appareil pratique, moderne et fonctionnel a été fabriqué avec des matériaux de toute première qualité. Ces matériaux ont été soumis à un contrôle de qualité très strict tout au long du processus de fabrication et ils ont été méticuleusement testés afin q ...

  • Siemens 5551 - page 28

    POUR VOTRE SECURITE Informations importantes pour l'installation et utilisation Indications importantes Pour la sécurité Avant la première mise en service Pour son utilisation Présentation de votre nouvelle table de cuisson Brûleurs à gaz Conseils pour cuisiner Ustensiles de cuisine appropriés A vertissements d'utilisation quant à ...

  • Siemens 5551 - page 29

    Pour votre sécurité VEUILLEZ LIRE LES INSTRUCTIONS A V ANT DE CONTINUER IMPORT ANT : Conservez ces instructions pour les fournir à l'inspecteur électricien local. INST ALLA TEUR : Joignez ces instructions à l'unité pour remettre l'ensemble au propriétaire. PROPRIÉT AIRE : Conservez ces instructions pour de futures consultatio ...

  • Siemens 5551 - page 30

    1 - Ne permettez pas que des flammes dépassent le bord de l'ustensile de cuisine. Cette instruction est fondée sur des considérations de sécurité. est en fonctionnement. Le sens commun est important. L'extinction des flammes ne signifie par que les pièces ne sont plus chaudes. 4 - Assurez-vous de déconnecter l'alimentation él ...

  • Siemens 5551 - page 31

    sécurité électrique de l'appareil, il est interdit d'utiliser des appareils de nettoyage à jet vapeur de haute pression. La plaque signalétique se trouve sur la partie inférieure de l'appareil. Uniquement si l'installation est effectuée aux USA : Cette installation doit respecter les lois locales ou, à défaut, le Nation ...

  • Siemens 5551 - page 32

    Indications importantes de sécurité Lisez attentivement toutes les instructions de ce Manuel de fonctionnement et de maintenance avant d'utiliser votre nouvelle table de cuisson. En tant qu'utilisateur , vous êtes responsable de la maintenance ainsi que de l'utilisation correcte de cet appareil chez vous. A VERTISSEMENT : Ces pré ...

  • Siemens 5551 - page 33

    • Cet appareil a été conçu pour la cuisson jamais la table de cuisson pour chauffer une pièce vu que l'appareil pourrait s'endommager . • Quand vous utilisez la table de cuisson : NE TOUCHEZ P AS LES GRILLES DES BRULEURS OU LES ZONES ENVIRONNANTES. Elles sont suffisamment chaudes pour provoquer des brûlures. • Ne laissez jamais ...

  • Siemens 5551 - page 34

    • Pour que les brûleurs s'allument et fonctionnent correctement, maintenez propres les sorties . Il faut nettoyer ces sorties quand il s'est produit un déversement ou quand le brûleur ne s'allume pas, même si les allumeurs électroniques font click. Consultez la section sur l'entretien et la maintenance. • Ne soulevez ja ...

  • Siemens 5551 - page 35

    Retirez l'emballage de l'appareil et éliminez-le conformément aux réglementations locales. N'oubliez pas qu'il existe d'autres accessoires en plus de l'emballage. Maintenez les éléments de l'emballage et les revêtements en plastique hors de portée des enfants. Vérifiez l'état de l'appareil avant ...

Manufacturer Siemens Category Cooktop

Documents that we receive from a manufacturer of a Siemens 5551 can be divided into several groups. They are, among others:
- Siemens technical drawings
- 5551 manuals
- Siemens product data sheets
- information booklets
- or energy labels Siemens 5551
All of them are important, but the most important information from the point of view of use of the device are in the user manual Siemens 5551.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Siemens 5551, service manual, brief instructions and user manuals Siemens 5551. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Siemens 5551.

Similar manuals

A complete manual for the device Siemens 5551, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Siemens 5551 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Siemens 5551.

A complete Siemens manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Siemens 5551 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Siemens 5551, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Siemens 5551, that we can find in the current document
3. Tips how to use the basic functions of the device Siemens 5551 - which should help us in our first steps of using Siemens 5551
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Siemens 5551
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Siemens 5551 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Siemens 5551?

Use the form below

If you did not solve your problem by using a manual Siemens 5551, ask a question using the form below. If a user had a similar problem with Siemens 5551 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)