English dropdown-ico

Manual HP ProLiant DL160

39 pages 0.82 mb
Download

Go to site of 39

Summary
  • HP ProLiant DL160 - page 1

    Hot Plug SAS/SATA and Non-Hot Plug SATA Models Front View: Rear View: 1. Access panel 1. Power Supply Cable Socket 2. Quad-Core Intel® Xeon® 5400 series processors (supports up to two) 2. PS/2 Mouse Port 3. PS/2 Keyboard Port 3. Eight PC2-5300 (DDR2-667) or PC2-6400 (DDR2-800) fully buffered DIMM memory slots 4. Two GbE LAN ports for NIC 1 and NI ...

  • HP ProLiant DL160 - page 2

    Quad-Core Intel® Xeon® processors 5400 sequence with 12 MB Level 2 cache Dual-Core Intel® Xeon® processors 5200 sequence with 6 MB Level 2 cache Intel® 5400 Chipset Memory : Supports up to 64 GB of PC2-5300 (DDR2-667) and up to 32 GB of PC2-6400 (DDR2-800) fully buffered DIMMs (DDR2-667) with Advanced ECC Internal Drive Support : Support for u ...

  • HP ProLiant DL160 - page 3

    Deployment/Serviceability : Tool-less access to all system components for easy in rack serviceability Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement Warranty : This product is covered by a global limited warranty and support ...

  • HP ProLiant DL160 - page 4

    NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA1-6954ENW.pdf NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integra ...

  • HP ProLiant DL160 - page 5

    Network Controller Two embedded NC105i PCIe Gigabit Server Adapters Expansion Slots # Technology Bus Width Connector Width * Bus Number * Device No . ** Form Factor Notes 1 PCI-Express 2.0 x16 x16 1 0 Full length, full height 3.3 volts 1 PCI-X *** 64-bit N/A 5 1 Full length, full height 3.3 volts 2 PCI-Express 2.0 x16 x16 6 3 Low Profile 3.3 volts ...

  • HP ProLiant DL160 - page 6

    Interfaces Parallel None Network RJ-45(Ethernet) 2 10/100/1000 NIC ports (plus 1 dedicated for the HP ProLiant Lights Out 100i Remote Management) Serial 1 Pointing Device (Mouse) 1 Graphics 1 Keyboard 1 USB 5 (two front, one internal, two rear) NOTE: Please see the following URL for additional information regarding USB support: http://h18004.www1.h ...

  • HP ProLiant DL160 - page 7

    HP Systems Insight Manager HP Systems Insight Manager (HP SIM) provides a unified, secure and extensible standards-based environment to centrally manage servers, storage and other infrastructure devices, (both HP and non-HP) across multiple operating system platforms. Core Infrastructure Management Subscriber's Choice Subscriber's Choice ...

  • HP ProLiant DL160 - page 8

    Disaster Tolerant Solutions HP Serviceguard for Linux Extended Distance Cluster (XDC) extends cluster distances up to 100 km, utilizes software RAID mirroring for data replication and is storage array independent HP StorageWorks XP/EVA Cluster Extension Software for Linux (CLX) works seamlessly with HP Serviceguard for Linux, HP StorageWorks Contin ...

  • HP ProLiant DL160 - page 9

    Server Power Cords One 6' Highline (IEC-IEC) power cord ships standard NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PD ...

  • HP ProLiant DL160 - page 10

    NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server, or to the server documentation located in the Support section at the following URL: www.hp.com/servers/dl160 . Rack Support The DL Fixed Rail System supports installation in racks with square or round mounting holes (includi ...

  • HP ProLiant DL160 - page 11

    Support Service – 3 Year, 9x5 Next Business Day coverage, excluding HP holidays only Deployment Service – Hardware Installation only Enhanced Service – Optimize service level to increase IT performance and availability Support Service – 3 Year 13x5 Same Business Day, 4-Hour response coverage Deployment Service – Installation and Start-up ...

  • HP ProLiant DL160 - page 12

    NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL160 G5 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Pleas ...

  • HP ProLiant DL160 - page 13

    Non-Hot Plug Serial ATA (SATA) Models NOTE: Non-Hot Plug models are not upgradeable to Hot Plug. Non-Hot Plug models require the addition of the HP HBA SAS-SATA 4x1LN Cable Kit (P/N: 452130-B21) in order to connect a hardware RAID controller. HP DL160 G5 X5472 Non-Hot Plug SATA, 2GB, (1P) 445198-xx1 HP DL160 G5 E5430 Non-Hot Plug SATA, 1GB, (1P) 44 ...

  • HP ProLiant DL160 - page 14

    Country Code Key xx = 00 U.S. xx = 20 Brazil (P/N 445202-201 only) xx = 29 Japan xx = 37 APD xx = 42 Euro xx = AA PRC QuickSpecs HP ProLiant DL160 Generation 5 Models DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 Page 14 ...

  • HP ProLiant DL160 - page 15

    NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information. NOTE: HP does not allow factory integration of options into standard models listed abo ...

  • HP ProLiant DL160 - page 16

    Quad-Core Intel® Xeon® processor X5472 (3.00 GHz, 120W, 1600MHz FSB), FIO NOTE: If 2 processors are desired, select one 462465-L21 and one 462465- B21. 462465-L21 Quad-Core Intel® Xeon® processor X5470 (3.33 GHz, 120W, 1333MHz FSB), FIO NOTE: If 2 processors are desired, select one 495612-L21 and one 495612- B21. 495612-L21 Quad-Core Intel® Xe ...

  • HP ProLiant DL160 - page 17

    Memory 1 GB FBD PC2-5300 2 X 512 MB Kit 397409-B21 2 GB FBD PC2-5300 2 X 1 GB Kit 397411-B21 4 GB FBD PC2-5300 2 X 2 GB Kit 397413-B21 8 GB FBD PC2-5300 2 X 4 GB Kit 397415-B21 Dual Rank 4 GB FBD PC2-6400 800MHz 2 x 2 GB Dual Rank Kit 484060-B21 8 GB FBD PC2-6400 2 x 4 GB Dual Rank Kit 484062-B21 16 GB FBD PC2-5300 2 x 8 GB Dual Rank Kit 413015-B21 ...

  • HP ProLiant DL160 - page 18

    NOTE: This option is required for any internal port HBA or controller that has a standard 4 port SAS/SATA connector. Step 3: Choose Additional Factory Integratable Options (only one of the following from each list unless otherwise noted) Power Supply HP High Efficiency Power Supply Kit, FIO NOTE: Selection of the HE Power Supply Unit will remove th ...

  • HP ProLiant DL160 - page 19

    Server Management Stand Alone Software Product and ProLiant Essentials NOTE: Electronic licensing options are available for Insight Control suites and select ProLiant Essentials software products. Please see the appropriate Insight Control and ProLiant Essentials QuickSpecs for additional information. Control Lights-Out 100i Advanced Pack HP Lights ...

  • HP ProLiant DL160 - page 20

    Memory 1 GB FBD PC2-5300 2 X 512 MB Kit 397409-B21 2 GB FBD PC2-5300 2 X 1 GB Kit 397411-B21 4 GB FBD PC2-5300 2 X 2 GB Kit 397413-B21 8 GB FBD PC2-5300 2 X 4 GB Kit 397415-B21 Dual Rank 4 GB FBD PC2-6400 2 X 2 GB Dual Rank Kit 484060-B21 8 GB FBD PC2-6400 2 x 4 GB Dual Rank Kit 484062-B21 16 GB FBD PC2-5300 2 x 8 GB Dual Rank Kit 413015-B21 64 GB ...

  • HP ProLiant DL160 - page 21

    NOTE: SATA hard drives have a 1-year warranty. Please see QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11940_div/11940_div.html (Worldwide) http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html (Worldwide) SAS Hot Plug 3.5" Midline (MDL) Drives HP 1TB 7.2K 3. ...

  • HP ProLiant DL160 - page 22

    HP SC44Ge Host Bus Adapter NOTE: PCI-Express SAS HBA. NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS. 416096-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18004.www1.hp.com/products/quickspecs/12332_div/12332_div.h ...

  • HP ProLiant DL160 - page 23

    NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12616_div/12616_div.html (Smart Array P800 Controller) Riser Board Kits HP PCI-X Riser Board Kit NOTE: Replaces the standard Full Height PCI Express slot with a Full Height PCI-X slot. 445986-B21 HP PCI-X L/P Riser ...

  • HP ProLiant DL160 - page 24

    Tape Drives NOTE: For the complete listing of Tape Drive offerings, please see: http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html USB Rack-Mount Tape Drives HP StorageWorks 1U USB Rack-Mount Kit with one DAT 160 USB Tape Drive NOTE: Pre-configured with one DAT 160 USB tape drive. AG703A SAS Rack-Mount Tape Drives NOTE: HP ...

  • HP ProLiant DL160 - page 25

    HP StorageWorks D2D2503i Backup System NOTE: 3TB of Disk Storage. EH945A HP StorageWorks D2D4004i Backup System EH938A NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12651_div/12651_div.html (Worldwide) Tape Autoloaders HP StorageWorks DAT Autoloader HP StorageW ...

  • HP ProLiant DL160 - page 26

    HP StorageWorks 50 Modular Smart Array HP StorageWorks 50 Modular Smart Array 364430-B21 NOTE: Rack-mountable 10 SFF drive enclosure with single I/O module, redundant hot plug power supplies and hot plug fans. NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12245 ...

  • HP ProLiant DL160 - page 27

    (Worldwide) StorageWorks Options StorageWorks Fibre Channel HBA NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and Linux. For detailed compatibility information please see: http://h18006.www1.hp.com/storage/saninfrastructure/hba.html HP StorageWorks FC2142SR 4Gb PCI-e HBA A8002A HP StorageWorks FC2242SR Dual Channe ...

  • HP ProLiant DL160 - page 28

    HP Rack 10000 G2 Series (Carbon/Graphite Metallic) 10642 G2 (42U) Rack Cabinet 1200mm Deep - Shock Pallet AF034A 10642 G2 (42U) Rack Cabinet 1200mm Deep - Pallet AF038A 10647 G2 (47U) Rack Cabinet 1200mm Deep - Shock Pallet AF044A 10647 G2 (47U) Rack Cabinet 1200mm Deep - Pallet AF045A NOTE: It is mandatory to use a shock pallet when shipping racks ...

  • HP ProLiant DL160 - page 29

    Service and Support Offerings (HP Care Pack Services) Hardware Services 4-Hour On-site Service 13-Hour x 5-Day Coverage, 3 Years, Electronic U9509E 24-Hour x 7 Day Coverage, 3 Years, Electronic U9510E Hardware Services Next Business Day On-Site Service 9-Hour x 5-Day Coverage, 3 Years, Electronic U9508E Hardware Services 6-Hour Call to Repair On-Si ...

  • HP ProLiant DL160 - page 30

    HP ProLiant DL160 G5 (all models) NOTE: Memory configurations listed do not apply to "Factory Integrated Models". Standard Memory 1GB (2x512MB) or 2GB (2 x 1GB) depending on model, PC2-5300 Fully Buffered DIMM memory, with Advanced ECC. Maximum Memory Up to 32GB memory is available with the optional installation of PC2-5300 Fully Buffered ...

  • HP ProLiant DL160 - page 31

    1-4 Four Non-hot plug SATA or four 3.5" Hot-plug SAS/SATA hard drive bays A Optional DVD-ROM, or DVD/CD RW Drive Support Removable Media Quantity Supported Position Supported Controller DVD-ROM Up to 1 A Integrated IDE (ATAPI) (optional) DVD/CD RW Up to 1 A Integrated IDE (ATAPI) (optional) Hard Drives NOTE: Transfer rates of drives are depend ...

  • HP ProLiant DL160 - page 32

    Quantity Supported Position Supported Controller 1TB 3G 7.2K 750 3G 7.2K Up to 4 1-4 Embedded SATA with integrated SATA RAID 0,1 HP Smart Array E200/128 BBWC Controller HP Smart Array P400 Controller HP Smart Array E500/256MB Controller HP Smart Array P800 Controller SAS Hot Plug 3.5" Enterprise (ENT) Drives NOTE: Installation of the Hot Plug ...

  • HP ProLiant DL160 - page 33

    Tape and Disk-Based Backup NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following: http://h18000.www1.hp.com/products/quickspecs/division/10233.html (Worldwide) NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Autoloaders and Tape Lib ...

  • HP ProLiant DL160 - page 34

    External DAT 72x10 Autoloader 1/8 G2 Autoloader MSL2024 MSL4048 HP U320e SCSI Host Bus Adapter NOTE: Recommended for MSL tape libraries. AH627A HP StorageWorks SAS Tape Automation, External 1/8 G2 Autoloader MSL2024 MSL4048 External HP SC44Ge Host Bus Adapter NOTE: Please visit: http://www.hp.com/go/connect for details about minimum SAS controller ...

  • HP ProLiant DL160 - page 35

    Operational Input Voltage Range (Vrms) 90Vac to 264Vac full range Frequency Range (Nominal) (Hz) 47 Hz to 63 Hz Nominal Input Voltage (Vrms) 100 115 200 220 230 240 Max Rated Output Wattage Rating 653.10 653.19 653.08 652.96 653.08 652.96 Nominal Input Current (A rms) 8.55 7.31 4.12 3.77 3.6 3.46 Max Rated Input Wattage Rating (Watts) 855 840.72 82 ...

  • HP ProLiant DL160 - page 36

    Power ProLiant DL160 G5 Fully Configured 115V/60Hz 220V/50Hz Fully Loaded System Input Wattage (W) 651 638 Fully Loaded System Input Current (A rms) 5.7 3.0 Fully Loaded System Thermal (BTU- Hr) 2218 2174 Fully Loaded System VA (Volt-Amp) 657 657 System Leakage with all power supplies loaded (mA) 1.58 3.03 System Inrush Current with all power suppl ...

  • HP ProLiant DL160 - page 37

    System Unit Dimensions (H x W x D) (with bezel) 1.70 x 17.64 x 26.85 in (4.32 x 44.80 x 68.20 cm) Weight (approximate) Maximum (all hard drives, power supplies, and processors installed) 37.00 lb (16.78 kg) Minimum (one hard drive, power supply, and processor installed) 30.00 lb (13.69 kg) Input Requirements (per power supply) Rated Line Voltage 90 ...

  • HP ProLiant DL160 - page 38

    Non-operating 30,000 ft (9144 m). Maximum allowable altitude change rate is 1500 ft/min (457 m/min). Acoustic Noise Listed are the declared A-Weighted sound power levels (L WAd ) and declared average bystander position A-Weighted sound pressure levels (L pAm ) when the product is operating in a 23°C ambient environment. Noise emissions were measur ...

  • HP ProLiant DL160 - page 39

    Embedded NC105i PCIe Gigabit Server Adapter Network Interface Integrated 10/100/1000BASE-T Transceiver Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver. Data Transfer Method Compliant to x1 PCIe Specification Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s 10Base-T (Full-Du ...

Manufacturer HP Category Computer Hardware

Documents that we receive from a manufacturer of a HP ProLiant DL160 can be divided into several groups. They are, among others:
- HP technical drawings
- ProLiant DL160 manuals
- HP product data sheets
- information booklets
- or energy labels HP ProLiant DL160
All of them are important, but the most important information from the point of view of use of the device are in the user manual HP ProLiant DL160.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals HP ProLiant DL160, service manual, brief instructions and user manuals HP ProLiant DL160. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product HP ProLiant DL160.

Similar manuals

A complete manual for the device HP ProLiant DL160, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use HP ProLiant DL160 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of HP ProLiant DL160.

A complete HP manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual HP ProLiant DL160 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the HP ProLiant DL160, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the HP ProLiant DL160, that we can find in the current document
3. Tips how to use the basic functions of the device HP ProLiant DL160 - which should help us in our first steps of using HP ProLiant DL160
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with HP ProLiant DL160
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of HP ProLiant DL160 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning HP ProLiant DL160?

Use the form below

If you did not solve your problem by using a manual HP ProLiant DL160, ask a question using the form below. If a user had a similar problem with HP ProLiant DL160 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)