Manual Texas Instruments TVP5146EVM

56 pages 1.86 mb
Download

Go to site of 56

Summary
  • Texas Instruments TVP5146EVM - page 1

    TVP5160EVM User’s Guide SLEU063 – March 2005 1 TVP5160EVM User’s Guide Digital Video Department Contents 1 Functional Description ...................................................................................................................... 3 1.1 Description Overview .................................................................... ...

  • Texas Instruments TVP5146EVM - page 2

    SLE U063 2 TVP5160EVM User’s Guide Figures Figure 1. TVP5160EVM Block Diagram .............................................................................................. 4 Figure 2. TVP5160EVM System Level Block Diagram ..................................................................... 8 Figure 3. WinVCC4 – I 2 C Configuration Screen .... ...

  • Texas Instruments TVP5146EVM - page 3

    SLE U063 TVP5160EVM User’s Guide 3 1 Functional Description The TVP5160EVM refers to both the TVP5160 board and the ADV7311 board when they are connected together. Both boards share a common interface via a 120 - pin connector . This interface provides all data, clocks, I 2 C communication , and 5 - V power to each board. The ADV7311 is a profess ...

  • Texas Instruments TVP5146EVM - page 4

    SLE U063 4 TVP5160EVM User’s Guide 2 Board Level Description Figure 1 illustrates the various features available on the TVP5160EVM . Figure 1. TVP5160 EVM Block Diagram 2.1 Analog Inputs The TVP5160EVM makes use of all the available inputs on the TVP5160 decoder . The following inputs are available for use: ? Composite (CVBS) ? S - Video ? YPbPr ...

  • Texas Instruments TVP5146EVM - page 5

    SLE U063 TVP5160EVM User’s Guide 5 Table 1. Analog Inputs and Pin Terminals Input Type TVP5160 Pin(s) CVBS VI_1 S - Video VI_3(Y), VI_9(C) YPbPr VI_5(Y), VI_11(Pb), VI_8(Pr) SCART VI_3(CVBS), VI_9(R), VI_6(G), VI_12(B) Tuner i nterface (CVBS) VI_2 VBI d ecoder i nterface ( a nalog RGB) V I_7(R), VI_4(G), VI_10(B) 2.2 Anti - Aliasing Filters Each ...

  • Texas Instruments TVP5146EVM - page 6

    SLE U063 6 TVP5160EVM User’s Guide 2.5 VBI Decoder Interface This interface provides a method of connecting an external VBI decoder module to the TVP5160EVM via the H3 and H4 headers . The VBI decoder may be a c losed - c aption decoder, t eletext decoder , or any other VBI de coder currently available on the market that prov ides the same signal ...

  • Texas Instruments TVP5146EVM - page 7

    SLE U063 TVP5160EVM User’ s Guide 7 2.7 SDRAM On the TVP5160EVM , there are three SDRAM footprints : 50 - pin, 54 - pin , and 86 - pin. Th e s e are provided to accommodate the us er’s choice of SDRAM that will be used in their final product. By default , the TVP5160EVM is provided with 64 - Mbit SDRAM (54TSOPII). If the SDRAM is changed , then ...

  • Texas Instruments TVP5146EVM - page 8

    SLE U063 8 TVP5160EVM User’s Guide 3 System Level Description The system block diagram ill ustrated in F igure 2 provides an example of how the TVP5160EVM may be used for evaluation. Typically , the analog input is a CVBS signal provided by a video source such as a pattern generator or a DVD player running a test DVD. The TVP5160EVM itself is c o ...

  • Texas Instruments TVP5146EVM - page 9

    SLE U063 TVP5160EVM User’s Guide 9 4 Required Hardware and Equipment The following lists the required hardware and equipment necessary to use the TVP5160EVM: - TVP5160EVM (provided) - Universal 5 - V power supply (provided) - Parallel cab le (provided) - Windows - based PC - 1 composite RCA video cable - 1 YPbPr component RCA video cable - Video ...

  • Texas Instruments TVP5146EVM - page 10

    SLE U063 10 TVP5160EVM User’s Guide 5 Hardware Setup The following describes how to s et up the hardware for the TVP5160EVM. 1. Connect the TVP5160EVM boards together using the 120 - pin board connector on each board . 2. Connect a CVBS input to the TVP5160 board and a component cable to the YPbPr outputs of the ADV7311 board. NOTE : For evaluati ...

  • Texas Instruments TVP5146EVM - page 11

    SLE U063 TVP5160EVM User’s Guide 11 6 Software Install ation WinVCC4 is a Windows application that uses the PC parallel port to emulate I 2 C , providing access to each device on the I 2 C bus. WinVCC4 makes use of CMD files, a text editable file that allows preset video setups to be programmed easily. This feat ure allows the user to easily set ...

  • Texas Instruments TVP5146EVM - page 12

    SLE U063 12 TVP5160EVM User’s Guide 7 WinVCC4 Quick Start The following describes the steps to take within WinVCC4 in order to get video out of the TVP51 60EVM. 1. Once WinVCC4 is executed, the WinVCC4 Configuration screen appear s . This dialog box is used to configure the I 2 C bus. Next to VID_DEC, select the TVP5160 and ensure the I 2 C addre ...

  • Texas Instruments TVP5146EVM - page 13

    SLE U063 TVP5160EVM User’s Guide 13 5. At the Real - Time Polling window, ensure that VIDEO - STANDA RD AUTO_SWITCH POLLING is enabled and click OK. Figure 4. WinVCC4 – Real Time Polling Screen 6. Load the provided TVP5160EVM.CMD file into WinVCC4 by clicking on Tools - > System Initialization - > Browse . The CMD should be available by d ...

  • Texas Instruments TVP5146EVM - page 14

    SLE U063 14 TVP5160EVM User’s Guide 8. With a video source provided at the composite video input, video should be vie wable on the TV/display monitor. All ADV7311 outputs are enabled simultaneously. NOTE : To ensure the TVP5160 is working properly, go to Video Status by clicking on Edit - > Property Sheets - > TVP5160PNP - > Video Decode ...

  • Texas Instruments TVP5146EVM - page 15

    SLE U063 TVP5160EVM User’s Guide 15 8 WinVCC4 in Depth The following describes how to use WinVCC4 in depth. It discusses various features and screens which the user m ay encounter while evaluating the TVP5160EVM. 8.1 Starting WinVCC4 The Port95NT parallel port driver must be installed before using WinVCC4. WinVCC4 may be started by clicking on St ...

  • Texas Instruments TVP5146EVM - page 16

    SLE U063 16 TVP5160EVM User’s Guide 8.2 WinVCC4 Co nfiguration Dialog Box The WinVCC4 Configuration dialog box, as seen in F igure 8 , should now be visible. This dialog configures the I 2 C bus on the TVP5160EVM. All settings from this dialog box are stored in the Windows registry and are restored the next time the program is started. After init ...

  • Texas Instruments TVP5146EVM - page 17

    SLE U063 TVP5160EVM User’s Guide 17 8.3 I 2 C System Test The I 2 C system test of selected registers runs immed iately after closing the WinVCC4 Configuration dialog box with OK (unless the I 2 C system test program options button was disabled). If the I 2 C system test passes, then only a PASS message will appear. If the test failed, then a dia ...

  • Texas Instruments TVP5146EVM - page 18

    SLE U063 18 TVP5160EVM User’s Guide If the WinVCC4 auto switch polling function is enabled, the n the detected video standard status from the TVP5160 decoder is polled until a change in the input video standard (or in the TVP5160 sampling mo de) is detected. When a change is detected, the video encoder is reprogrammed as needed for the detected s ...

  • Texas Instruments TVP5146EVM - page 19

    SLE U063 TVP5160EVM User’s Guide 19 8.5 Main Menu After closing the Real – Time Polling dialog, the main menu is displayed as shown in F igure 11 . The menus, which are used to operate WinVCC4, are File , Edit , Tools , Wi ndow , and Help . The File menu’s only function is Exit , which terminates the program. The following table summar izes t ...

  • Texas Instruments TVP5146EVM - page 20

    SLE U063 20 TVP5160EVM User’s Guide 8.5.1 System Initialization Clicking System Initialization in the Tools menu displays the dialo g shown below . This provides the means for initializing the video decoder and/or video encoder for a particular video mode. The details of the initialization are contained in the command file (with a CMD file extens ...

  • Texas Instruments TVP5146EVM - page 21

    SLE U063 TVP5160EVM User’s Guide 21 8.5.1.1 Adding a Custom Data Set After you program the EVM via the System Initialization tool using the factory - supplied command file , and by us ing the Property Sheets tool, you can customize the device register settings to suit your needs. To save your custom settings: 1. Reopen the System Initialization d ...

  • Texas Instruments TVP5146EVM - page 22

    SLE U063 22 TVP5160EVM User’s Guide 8.5.1.3 Example Command Fil e An example of one data set within a command file is shown below. Each command file may contain individual write to register (WR_REG) commands. BEGIN_DATASET // Data set 1 DATASET_NAME,"TVP5160 (SD) & ADV7311 - CVBS in, 10 - bit ITU - 656, 3DYC, 3DNR En abled, CVBS, SV & ...

  • Texas Instruments TVP5146EVM - page 23

    SLE U063 TVP5160EVM User’s Guide 23 7. The write to register command is written as follows: WR_REG, <DeviceFamily>, <Number of data bytes (N)>, <subaddress>, <Data1>, … , <DataN> or WR_REG, <Literal slave address>, <Number of data bytes (N)>, <subaddress>, <Data1>, … , <DataN> The va ...

  • Texas Instruments TVP5146EVM - page 24

    SLE U063 24 TVP5160EVM User’s Guide 8.5.2 Register Editing T he next section describe s the four available modes of register editing: Register Map Editor , Encoder Module Editor , Generic I2C Register Editor , and Property Sheets . Each of these functions can be selected from the Edit menu. 8.5.2.1 Re gister Map Editor The register map editor, as ...

  • Texas Instruments TVP5146EVM - page 25

    SLE U063 TVP5160EVM User’s Guide 25 Table 5. Register Map Editor Controls Control Definition Register Window Scrolling text box that displays the address and data for the I 2 C registers that are defined for the device. Address Edit Box This contains the I 2 C subaddress that will be accessed using the Write and Read buttons. Clicking on a row se ...

  • Texas Instruments TVP5146EVM - page 26

    SLE U063 26 TVP5160EVM User’s Guide 8.5.2.2 Encoder Module Editor Th e encoder module editor, as shown in F igure 14, allows the display and editing of the video encoder registers. This editor works like the Register Map Editor . To open this, click on Edit Register Map in the Edit menu and click on Encoder Module . Figure 14. Encoder Module Edit ...

  • Texas Instruments TVP5146EVM - page 27

    SLE U063 TVP5160EVM User’s Guide 27 8.5.2.3 Generic I 2 C Register Editor The Generic I2C Editor , as shown in F igure 15, allows the display and editing of any device on the I 2 C bus. This editor works like the Register Map Editor , except that the I 2 C slave address must be entered and the Read All button is disabled. To open this, click on E ...

  • Texas Instruments TVP5146EVM - page 28

    SLE U063 28 TVP5160EVM User’s Guide 8.5.2.4 Indirect Register Editor The indirect register editor, as shown in F igure 16, allows the display and editing of the indirect registers (or hardware registers) of the device. To open this, first open the register map editor in the Edit menu for the TVP5160 . Then, click the Edit Indirect Registers butto ...

  • Texas Instruments TVP5146EVM - page 29

    SLE U063 TVP5160EVM User’s Guide 29 8.5.3 Property Sheets The Property Sheets represent the register data in a user - friendly format. The data is organized by function, with each function having its own page and being selectable via tabs at the top. To open th is, click on Edit Property Sheets in the Edit menu and select the device type to edit. ...

  • Texas Instruments TVP5146EVM - page 30

    SLE U063 30 TVP5160EVM User’s Guide 8.5.3.2 Auto – Update from Device Items 4 and 5 above are r eferred to as the Auto – Update feature. Auto – Update can be disabled by setting its program option button to DISABLED. This button is located on the initial dialog bo x (WinVCC4 C onfiguration). With Auto – Update enabled (default), the user ...

  • Texas Instruments TVP5146EVM - page 31

    SLE U063 TVP5160EVM User’s Guide 31 Table 7. Use of Property Sheet Controls Dialog Control What Do I Do With It? When is Hardware Updated? Read – Only Edit Box Read status informati on N/A Check Box Toggle a single bit After Apply Drop – Down List Select from a text list After Apply Edit Box Type a number After Apply Edit Box with Up/Down arr ...

  • Texas Instruments TVP5146EVM - page 32

    SLE U063 32 TVP5160EVM User’s Guide 9 Troubleshooting This chapter discusses ways to troubleshoot the TVP5160 EVM. 9.1 Troubleshooting Guide If you are experiencing problems with the TVP5160 EVM hardware or the WinVCC4 software, see T able 9 for available solutions. Table 9. TVP51 60EVM Troubleshooting Symptom Cause Solution At startup, the error ...

  • Texas Instruments TVP5146EVM - page 33

    SLE U063 TVP5160EVM User’s Guide 33 Table 10. I 2 C Troubleshooting Symptom Cause Solution I 2 C sla ve address is wrong. Close and restart WinVCC4. Choose the alternate slave address in the WinVCC4 Configuration dialog. Parallel cable is not connected from PC parallel port to the EVM DB25 connector. Connect cable. EVM is not powered on. The powe ...

  • Texas Instruments TVP5146EVM - page 34

    SLE U063 34 TVP5160EVM User’s Guide Figure 18. I 2 C System Failure Dialog Box 9.2 Corrective Action Dialogs After closing the I 2 C system test report dialog box, the dialog in F igure 19 appears. Figure 19. Corrective Action Dialog Box 1. If the cable is NOT connected from the PC parallel port to the TVP51 60 EVM or if the EVM power is not on: ...

  • Texas Instruments TVP5146EVM - page 35

    SLE U063 TVP5160EVM User’s Guide 35 c. Correct the problem. d. Click OK to continue. The real - time polling dialog should appear. See S ection 3.2.3. Figure 20. Corrective Action Requi red 2. If the cable is connected from the PC parallel port to the TVP5160 EVM AND the EVM power is on: a. Click Yes . b. The dialog shown in Figure 21 appears. Th ...

  • Texas Instruments TVP5146EVM - page 36

    SLE U063 36 TVP5160EVM User’s Guide 1. Restart the PC. 2. During the boot process, enter the BIOS setup program by pressing the required key (usually the initial text screen tells you which key to press). 3. Find the place where the parallel port settings are made. 4. Set the parallel port LPT1 at address 378h to ECP mode or bidirectional mode (s ...

  • Texas Instruments TVP5146EVM - page 37

    SLE U063 TVP5160EVM User’s Guide 37 10 TVP5160 EVM Schematics This chapter contains the TVP 5160 EVM schematics. ...

  • Texas Instruments TVP5146EVM - page 38

    123456 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size C Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSADV7311EVM_MODULE_REV1.0ADV7311EVM_MODULE_REV1.0.Ddb Drawn By: ADV7311 MODULE REV 1.0 R/Pr SV B/Pb G/Y CVBS REV 1.0 ENCODER EVM - BLOCK DIAGRAM SCL SDA I2C I2C RESET CONN_RESET Power Power SDA SCL /HSYNC /V ...

  • Texas Instruments TVP5146EVM - page 39

    123456 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size C Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSADV7311EVM_MODULE_REV1.0ADV7311EVM_MODULE_REV1.0.Ddb Drawn By: REV 1.0 ENCODER EVM - I2C 11 10 U2E 74AHC05 R4 2.2k R5 2.2k SDA SCL C1 0.1uF R7 2.2k R8 2.2k R1 2.2k R2 2.2k R3 2.2k SCL R9 0 SDA R6 0 D3_3V DB ...

  • Texas Instruments TVP5146EVM - page 40

    123456 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size C Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSADV7311EVM_MODULE_REV1.0ADV7311EVM_MODULE_REV1.0.Ddb Drawn By: CONTROL 1 /RESIN 2 CT 3 GND 4 /RESET 5 RESET 6 SENSE 7 VDD 8 U3 TLC7733IPW C10 0.1uF C9 1uF R12 100k S1 PB RESET RESET ON POWER UP RESET D3_3V ...

  • Texas Instruments TVP5146EVM - page 41

    123456 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size C Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSADV7311EVM_MODULE_REV1.0ADV7311EVM_MODULE_REV1.0.Ddb Drawn By: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 H2 HEADER 10X2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 H3 HEADER 10X2 SDA SCL SDA ...

  • Texas Instruments TVP5146EVM - page 42

    123456 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size C Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSADV7311EVM_MODULE_REV1.0ADV7311EVM_MODULE_REV1.0.Ddb Drawn By: FFOE/DIG_V 1 FFRE/DIG_H 2 FFRSTWIN/~SCLK 3 FFWE/DVALID 4 FFIE/CCVALID 5 VGAV/SYNC_T 6 FSY/HC/HSYA/~BLNK 7 FFRSTW/CBFLAG 8 FPDAT/VSYA/M2 9 CLK5/ ...

  • Texas Instruments TVP5146EVM - page 43

    123456 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size C Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSADV7311EVM_MODULE_REV1.0ADV7311EVM_MODULE_REV1.0.Ddb Drawn By: C12 0.1uF C11 0.1uF C13 0.1uF D3_3V CLKIN RTC /RESET ALSB REV 1.0 C[9..0] VDD_IO 1 Y0 2 Y1 3 Y2 4 Y3 5 Y4 6 Y5 7 Y6 8 Y7 9 VDD 10 DGND 11 Y8 12 ...

  • Texas Instruments TVP5146EVM - page 44

    1 2 3 4 5 6 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size B Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSTVP5160EVMTVP5160EVM_MODULE_REV2.0TVP5160EVM_MODULE_REV 2.0.ddb Drawn By: TVP5160EVM Rev 2.0 Y/G Pr/R SV Pb/B CVBS TVP5160EVM - BLOCK DIAGRAM REV 2.0 Tuner SCART SCL SDA I2C I2C SDA SCL TUNER_CVBS Tun ...

  • Texas Instruments TVP5146EVM - page 45

    123456 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size C Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSTVP5160EVMTVP5160EVM_MODULE_REV2.0TVP5160EVM_MODULE_REV 2.0.ddb Drawn By: TVP5160EVM - I2C REV 2.0 11 10 U2E 74AHC05 R53 2.2k R54 2.2k SDA C1 0.1uF R7 2.2k R9 2.2k R8 2.2k R24 2.2k R52 2.2k SCL R5 0 SDA R6 ...

  • Texas Instruments TVP5146EVM - page 46

    123456 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size C Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSTVP5160EVMTVP5160EVM_MODULE_REV2.0TVP5160EVM_MODULE_REV 2.0.ddb Drawn By: TVP5146EVM - TV TUNER INTERFACE REV 2.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 3 ...

  • Texas Instruments TVP5146EVM - page 47

    1 2 3 4 5 6 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size B Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSTVP5160EVMTVP5160EVM_MODULE_REV2.0TVP5160EVM_MODULE_REV 2.0.ddb Drawn By: TVP5160EVM - VBI DECODER INTERFACE CVBS_IN HSYNC VSYNC RED GREEN BLUE FSS_RGB D5V SDA SCL DR DG DB FSO REV 2.0 1 2 3 4 5 6 7 8 ...

  • Texas Instruments TVP5146EVM - page 48

    1 2 3 4 5 6 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size B Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSTVP5160EVMTVP5160EVM_MODULE_REV2.0TVP5160EVM_MODULE_REV 2.0.ddb Drawn By: REV 2.0 TVP5160EVM - ANTI-ALIASING FILTERS L4 2.2uH L3 1.8uH C13 330pF C15 330pF C11 8.2pF C12 220pF C4 5.6pF C14 220pF L8 2.2 ...

  • Texas Instruments TVP5146EVM - page 49

    123456 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size C Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSTVP5160EVMTVP5160EVM_MODULE_REV2.0TVP5160EVM_MODULE_REV 2.0.ddb Drawn By: C41 22uF C42 22uF R21 249k R22 249k R20 249k VOUT1 IS 3.3V 1A VOUT2 IS 1.8V 2A TVP5160 POWER SUPPLY R19 330 POWER ON LED (+5V) C49 ...

  • Texas Instruments TVP5146EVM - page 50

    1 2 3 4 5 6 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size B Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSTVP5160EVMTVP5160EVM_MODULE_REV2.0TVP5160EVM_MODULE_REV 2.0.ddb Drawn By: TVP5160EVM - SDRAM 50-PIN TSOP II DQ[15..0] /CAS /RAS DQM AQ[11..0] CLK /WE C51 0.1uF C52 0.1uF C53 0.1uF C54 0.1uF C55 0.1uF ...

  • Texas Instruments TVP5146EVM - page 51

    1 2 3 4 5 6 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size B Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSTVP5160EVMTVP5160EVM_MODULE_REV2.0TVP5160EVM_MODULE_REV 2.0.ddb Drawn By: TVP5160EVM - SDRAM 86-PIN TSOP II DQ[15..0] /CAS /RAS /CS DQM AQ[11..0] CLK /WE VDD 1 D0 2 VDDQ 3 D1 4 D2 5 VSSQ 6 D3 7 D4 8 V ...

  • Texas Instruments TVP5146EVM - page 52

    1 2 3 4 5 6 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size B Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSTVP5160EVMTVP5160EVM_MODULE_REV2.0TVP5160EVM_MODULE_REV 2.0.ddb Drawn By: TVP5160EVM - SDRAM 54-PIN TSOP II DQ[15..0] /CAS /RAS DQM AQ[11..0] CLK /WE Reference Vss 54 Vcc 1 DQ15 53 VssQ 52 DQ0 2 DQ14 ...

  • Texas Instruments TVP5146EVM - page 53

    123456 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size C Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSTVP5160EVMTVP5160EVM_MODULE_REV2.0TVP5160EVM_MODULE_REV 2.0.ddb Drawn By: FFOE/DIG_V 1 FFRE/DIG_H 2 FFRSTWIN/~SCLK 3 FFWE/DVALID 4 FFIE/CCVALID 5 VGAV/SYNC_T 6 FSY/HC/HSYA/~BLNK 7 FFRSTW/CBFLAG 8 FPDAT/VSY ...

  • Texas Instruments TVP5146EVM - page 54

    123456 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size C Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSTVP5160EVMTVP5160EVM_MODULE_REV2.0TVP5160EVM_MODULE_REV 2.0.ddb Drawn By: A1_8V A3_3V TVP5160EVM - TESTPOINTS TP 1 A1.8V 1_8V TP 1 A3.3V 3_3V REV 2.0 DATACLK FID VS_VBLNK HSYNC AVID INTREQ_TP INTREQ_TP AVI ...

  • Texas Instruments TVP5146EVM - page 55

    123456 A B C D 6 5 4 3 2 1 D C B A Title Number Revision Size C Date: 16-Feb-2005 Sheet of File: C:UserdataEVM Design FilesMODULARIZED_EVMSTVP5160EVMTVP5160EVM_MODULE_REV2.0TVP5160EVM_MODULE_REV 2.0.ddb Drawn By: C108 33pF R51 100k 14.31818MHz 14.31818MHz C107 33pF DATACLK FID VS_VBLNK HS_CS SDRAM_/CS R25 75 R35 75 R34 75 SV_C/SCRT_RED SV_Y/S ...

  • Texas Instruments TVP5146EVM - page 56

    IMPORT ANT NOTICE T exas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orde ...

Manufacturer Texas Instruments Category TV Receiver

Documents that we receive from a manufacturer of a Texas Instruments TVP5146EVM can be divided into several groups. They are, among others:
- Texas Instruments technical drawings
- TVP5146EVM manuals
- Texas Instruments product data sheets
- information booklets
- or energy labels Texas Instruments TVP5146EVM
All of them are important, but the most important information from the point of view of use of the device are in the user manual Texas Instruments TVP5146EVM.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Texas Instruments TVP5146EVM, service manual, brief instructions and user manuals Texas Instruments TVP5146EVM. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Texas Instruments TVP5146EVM.

A complete manual for the device Texas Instruments TVP5146EVM, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Texas Instruments TVP5146EVM by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Texas Instruments TVP5146EVM.

A complete Texas Instruments manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Texas Instruments TVP5146EVM - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Texas Instruments TVP5146EVM, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Texas Instruments TVP5146EVM, that we can find in the current document
3. Tips how to use the basic functions of the device Texas Instruments TVP5146EVM - which should help us in our first steps of using Texas Instruments TVP5146EVM
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Texas Instruments TVP5146EVM
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Texas Instruments TVP5146EVM in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Texas Instruments TVP5146EVM?

Use the form below

If you did not solve your problem by using a manual Texas Instruments TVP5146EVM, ask a question using the form below. If a user had a similar problem with Texas Instruments TVP5146EVM it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)