-
TP-Link 54Mbps Wireless Router - page 1
TL-WR340G/TL-WR340GD User Guide 54M Wireless Router Rev: 1.0.2 1910010064 ...
-
TP-Link 54Mbps Wireless Router - page 2
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other br ands and product names are trademarks or registered trademarks of t heir respective holders. No part of the specificat ions may be reproduced in any form or b y any means or used to make any derivativ ...
-
TP-Link 54Mbps Wireless Router - page 3
FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Ru les. These limits are designed to pr ovide reasonable protectio n against harmful interference in a residential installation. This equipment ge nerates, uses and can radiate radio frequency energy and, if ...
-
TP-Link 54Mbps Wireless Router - page 4
National Restrictions 2400.0-2483.5 MHz Country Restriction Reason/remark Bulgaria General authorization requ ired for outdoor use and public service France Outdoor use limited to 10 mW e.i.r.p. w ithin the b and 2454-2483.5 MHz Military Radiolocatio n use. Re farming of the 2.4 GHz band has been ongoing in rec ent years to allo w current relaxed r ...
-
TP-Link 54Mbps Wireless Router - page 5
TP-LINK TECHNOLOGIES CO., LTD DECLARA TION OF CONFORMITY For the following equipment: Product Description: 54M Wireless Router Model No.: TL-WR340G T rademark: TP-LINK We declare under our own respon sibility that the above products satisfy all the technical regulations applicable to the product with in the scope of Council Directives: Directives 1 ...
-
TP-Link 54Mbps Wireless Router - page 6
Package contents The following contents should be found in your box: ¾ One TL-WR340G/TL-WR340GD 54Mbps Wireless Router ¾ One AC power Adapter for TL-WR340G/TL-WR340GD 54Mbps Wireless Router ¾ Quick Installation Guide ¾ One Resource CD for TL-WR340G/TL-WR3 40G D 54Mbps Wireless Router, including: • This Guide • Other Helpful Information ) No ...
-
TP-Link 54Mbps Wireless Router - page 7
CONTENTS Chapter 1. Introducti on ........................................................................................ 1 1.1 Product Overview ...................................................................................................... 1 1.2 Main Features ................................................................................. ...
-
TP-Link 54Mbps Wireless Router - page 8
3.8.3 Domain Filt ering ............................................................................................................. 41 3.8.4 MAC Filt ering .................................................................................................................. 43 3.8.5 Remote Man agement ................................................. ...
-
TP-Link 54Mbps Wireless Router - page 9
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 1 Chapter 1. Introduction Thank you for choosing the TL-WR340G/ TL-WR340GD 54Mbp s Wireless Router. 1.1 Product Overview Thank you for choosing the TL -WR3 40G/TL-WR340GD 54Mbps Wireless Router. This router provides dedicated solution for Small Office/Home Office (SOHO) networks. With your network ...
-
TP-Link 54Mbps Wireless Router - page 10
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 2 ¾ Supports connecting/disconnecti ng from the Internet on a specified time of day. ¾ Supports access control, parents and network ad ministrators can estab lish restricted access policies based on time of day for children or staff. ...
-
TP-Link 54Mbps Wireless Router - page 11
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The Router’s LEDs are located on the fr ont panel (View from left to right). LED Explanation: Name Status Indication Off No Power PWR On Power on Off The Router has an error On The Router is initializing SYS Flashing The Router is w ...
-
TP-Link 54Mbps Wireless Router - page 12
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 4 2.2 The Back Panel Figure 2-2 The following parts are located on the rear panel (View from left to right). ¾ Antenna: Used for wireless operation and data transmit. ¾ Reset Button: There are two ways to reset the Router 's factory defaults. With the router powered on, use a pin to press a ...
-
TP-Link 54Mbps Wireless Router - page 13
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 5 ¾ Each PC in the LAN needs a working Ether net Adapter and an Ether net cable with RJ45 connectors ¾ TCP/IP protocol must be installed on each PC ¾ Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or l ater 2.4 Inst allation Environment Requirements ¾ The ...
-
TP-Link 54Mbps Wireless Router - page 14
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 6 Figure 2-3 Hardware Installation of the Router 2.6 Configure PC Your PC needs a network adapter. You may directly connect your adapter to the Router, or you may connect your adapter to a Hub/Switch, and then connect the Hub/Switch to the Router. Follow the instructions below to configure a compu ...
-
TP-Link 54Mbps Wireless Router - page 15
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 7 Figure 2-4 2. In the Network Connections window, right-click on LAN (Local Area Conn ection), then click Properties. Figure 2-5 3. In the General tab of Internet Protocol (TCP/IP) Properties menu, highlight Internet Protocol (TCP/IP) under “This c onnection uses the following item s:” by cli ...
-
TP-Link 54Mbps Wireless Router - page 16
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 8 Click on the Properties button. Figure 2-6 4. Select “Obtain an IP address automatically ” by clicking the radio-button. Click OK Figure 2-7 ¾ Configure the IP address manually 1. Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192.168.1.* (* is any value between ...
-
TP-Link 54Mbps Wireless Router - page 17
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 9 Now, you can run the Ping command in the command prompt to verify the network connection between your PC and the Router. The following example is in Windows XP Operating System. 2. Open a command prompt, From the Start m enu on your desktop, select run tab, type cmd in the field, and type ping 1 ...
-
TP-Link 54Mbps Wireless Router - page 18
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 10 Chapter 3. Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation, For advanced users, if you want to know more abo ut this device and make use of its functions adequately, you nee d to read this chapter and configure advance d set ...
-
TP-Link 54Mbps Wireless Router - page 19
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 11 Figure 3-1 Router S tatus 3.3 Quick Setup Please refer to Quick Installation Guide ...
-
TP-Link 54Mbps Wireless Router - page 20
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 12 3.4 Network Figure 3-2 the Network menu There are three submenus under the Network me nu (shown in Figure 3-2 ): LAN , WAN and MAC Clone. Click any of them, and you will be able to configure the corres ponding function. The detailed explanations for eac h submenu are provided below. 3.4.1 LAN Y ...
-
TP-Link 54Mbps Wireless Router - page 21
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 13 are not sure which connection type you use curr ently, please contact y our ISP to obtain the correct information. 1. If you choose Dynamic I P, the router will automatically get IP parameters from your ISP. You can see the page as follows ( Figure 3-4 ): Figure 3-4 W AN – Dynam ic IP This pa ...
-
TP-Link 54Mbps Wireless Router - page 22
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 14 2. If you choose Static IP, you should have fixed IP Parameters specified by your ISP. The Static IP settings page will appear, shown in Figure 3-5 : Figure 3-5 W AN - S tatic IP You should type the following paramet ers into the spaces provided: ¾ IP Address - Enter the IP address in dotted-d ...
-
TP-Link 54Mbps Wireless Router - page 23
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 15 Figure 3-6 W AN - PPPoE ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Connect on Demand - You can configure the router to disconnect your Internet connection after a specified period of inactivity ( Max Idle Time ). If your In ...
-
TP-Link 54Mbps Wireless Router - page 24
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 16 Caution :Sometimes the connection cannot be disconnect ed although you specify a time to Max Idle Time, since some applications are visiti ng the Internet continually in the background. Click the Connect button to connect imm ediately. Click the Disconnect button to disconnect immediately. Clic ...
-
TP-Link 54Mbps Wireless Router - page 25
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 17 Figure 3-8 802.1X + Dynamic IP Settings ¾ User Name - Enter the user name for 802.1X auth entication provided by your ISP ¾ Password - Enter the password for 802.1X authe ntication provided by you r ISP. Click Login to start 802.1X authentication. Click Logout to end 802.1X authentication. ¾ ...
-
TP-Link 54Mbps Wireless Router - page 26
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 18 Figure 3-9 802.1X + S tatic IP Settings ¾ User Name - Enter the user name for 802.1X auth entication provided by your ISP ¾ Password - Enter the password for 802.1X authe ntication provided by you r ISP. Click Login to start 802.1X authentication. Click Logout to end 802.1X authentication. ¾ ...
-
TP-Link 54Mbps Wireless Router - page 27
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 19 Figure 3-10 Big Pond Settings ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Auth Server - Enter the authenticating server IP address or host name. ¾ Auth Domain - Type in the domain suffix server name based on your location. ...
-
TP-Link 54Mbps Wireless Router - page 28
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 20 soon as you attempt to access the Internet again. To use this option, click the radio button. If you want your Internet connection to remain active at all times, enter "0" in t he Max Idle Time field. Otherwise, enter the number in minutes t hat you wish to have the Internet connectin ...
-
TP-Link 54Mbps Wireless Router - page 29
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 21 connection after a specified period of inactivity ( Max Idle Time ). If your Internet connection has been terminated due to inactivity, Connect on Demand enable s the router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activat ...
-
TP-Link 54Mbps Wireless Router - page 30
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 22 Figure 3-12 PPTP Settin gs ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Dynamic IP/ Static IP – Choose either as you are given by your ISP and enter the ISP’s IP address or the domain name. If you choose static IP and ent ...
-
TP-Link 54Mbps Wireless Router - page 31
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 23 Caution : Sometimes the connection cannot be disc onnected although you s pecify a time to Max Idle Time, since some applications are visiting the Internet continually in the background. ¾ Connect Automatically - Connect automatically after the rout er is disconnected. To use this option, clic ...
-
TP-Link 54Mbps Wireless Router - page 32
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 24 3.5 Wireless Figure 3-14 Wireless menu There are three submenus under the Wireless menu (shown in Figure 3-14 ): Wireless Settings , MAC Filtering and Wireless Statistics. Click any of them, and you w ill be able to configure the corresponding function. The det ailed explanations for each subme ...
-
TP-Link 54Mbps Wireless Router - page 33
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 25 ¾ SSID - Enter a value of up to 32 characters. The same name (SSID) must be assigned to all wireless de vices in your n etwork. The default SSID is T P-LINK, but it is re commended strongly that you change your networks name (SSI D) to a different value. This value is case-sensitive. For examp ...
-
TP-Link 54Mbps Wireless Router - page 34
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 26 The APs can communicate with each other in Bridge mode unless they know each other’s MAC address. For example, if the router whose MAC addres s is 00-13-56-A8-9E-1A wants to communicate with an AP whose MAC address is 00-13-56 -A8-9E-1B in Bridge mode, you should do as following: 1. Select En ...
-
TP-Link 54Mbps Wireless Router - page 35
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 27 ¾ WEP Ke y settings - Select which of the four keys w ill be used and enter the matching WEP key information for your network in the selected key radio bu tton. These values must be identical on all wireless st ations in your network. ¾ Ke y Type - You can select the WEP key length ( 64-bit , ...
-
TP-Link 54Mbps Wireless Router - page 36
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 28 ¾ Radius Port - Enter the port number that the radius service used. ¾ Radius Passw ord - Enter the password for the Radius Server. Be sure to click the Save button to save your settings on this page. ) Note: The router will reboot automatically after you click save. 3.5.2 MAC Filter ing The W ...
-
TP-Link 54Mbps Wireless Router - page 37
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 29 Figure 3-20 Add or Modify Wireless MAC Address Filtering entry To add or modify a MAC Address Filter ing entry, follow these instructions: 1. Enter the appropriat e MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is an y hexadecimal digit). For exam ...
-
TP-Link 54Mbps Wireless Router - page 38
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 30 by following t hese steps: 1. Click the Enable button to enable this function. 2. Select the radio button: Deny the stations not specified b y any enabled entries in the list to access for Filtering Rules. 3. Delete all or disable all entries if there are any entri es already. 4. Click the Add ...
-
TP-Link 54Mbps Wireless Router - page 39
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 31 ¾ Current Status - The connected wi reless station's running status, one of STA-AUTH / STA-ASSOC / AP-UP / WPA / W PA-PSK /WPA2/WPA2-PSK/None ¾ Received Packets - Packets received by the station ¾ Sent Packets - Packets sent by the station You cannot change any of the val ues on this pa ...
-
TP-Link 54Mbps Wireless Router - page 40
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 32 have another DHCP server within your network or else you must manually configure the computer. ¾ Start IP Address - This field specifies the first of the addresses in the IP address pool. 192.168.1.100 is the def ault start address. ¾ End IP Address - This field specifies the last of the addr ...
-
TP-Link 54Mbps Wireless Router - page 41
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 33 3.6.3 Address Reservation When you specify a reserved IP address for a PC on the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses should be assigned to servers that require permanent IP settings. This page is used for address ...
-
TP-Link 54Mbps Wireless Router - page 42
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 34 Click the Delete All button to delete all entries Click the Next button to go to the next page and Click the Previous button to return the previous ) Note: The function won't take effect until the router reboots. 3.7 Forwarding Figure 3-27 The Forwarding menu There are four submenus under ...
-
TP-Link 54Mbps Wireless Router - page 43
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 35 Service Port list does not have the serv ice that you want to us e, type the number of the service port or service port range in the Service Port box. 3. Type the IP Address of the computer in the Server IP Address box. 4. Select the protocol used for this application, either TCP or UDP , or Al ...
-
TP-Link 54Mbps Wireless Router - page 44
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 36 Figure 3-30 Port T riggering Once configured, operation is as follows: 1. A local host makes an outgoing connection using a destination port number defined in the Trigger Port field. 2. The router records this connection, opens t he incoming port or ports associated with this entry in the Port ...
-
TP-Link 54Mbps Wireless Router - page 45
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 37 Figure 3-31 Add or Modify a T riggering Entry There are many popular applications in the Popular Application list. You can select it, and the application will fill in the Trigger Port , incoming Ports Range boxes and select the Enable checkbox. It has the same effect as adding a new rule. T o m ...
-
TP-Link 54Mbps Wireless Router - page 46
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 38 Figure 3-32 DMZ To assign a computer or server to be a DMZ server: 1. Click the Enable radio button 2. Enter the local host IP Address in the DMZ Host IP Address field ) Note: After you set the DMZ host, the firewa ll related to the host will not work. 3.7.4 UPnP The Universal Plug and Play (UP ...
-
TP-Link 54Mbps Wireless Router - page 47
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 39 3.8 Security Figure 3-34 The Security menu There are six submenus under t he Se curity menu (shown in Figure 3-34 ): Fire w all , IP Address Filtering, Domain Filter ing, M AC Filtering, Remote Management and Advanced Security. Click any of them, and you will be able to c onfigure the correspon ...
-
TP-Link 54Mbps Wireless Router - page 48
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 40 ¾ Enable MAC Filtering - set MAC Address Filtering is enabled or disabled. You can select the default filtering rules of MAC Address Filtering, either Allow or Deny accessing the router. 3.8.2 IP Address Filter ing The IP address Filtering feature allows you to c ontrol Internet Access by spec ...
-
TP-Link 54Mbps Wireless Router - page 49
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 41 open, which means all LAN IP Addresse s have been put into the field. 3. LAN Port - Enter a LAN Port or a range of LAN ports in the fie ld. For example, 1030 - 2000. Keep the field open, which means all LAN ports have been put into the field. 4. WAN IP Address - Enter a WAN IP Address or a rang ...
-
TP-Link 54Mbps Wireless Router - page 50
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 42 Figure 3-38 Domain Filtering Before adding a Domain Filtering entry, you must ensure that Enable Firewall and Enable Domain Filtering have been selected on the Fire wa ll page. To Add a Domain filtering en try, click the Add New… button. The page " Add or Modify a Domain Filtering entry ...
-
TP-Link 54Mbps Wireless Router - page 51
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 43 Click the Delete All button to delete all entries Click the Next button to go to the next page and the Previous button to return to the previous page. For example : if you want to block the PC(s) on your LAN to access websites www.xxyy.com.cn , www.aabbcc.com and w ebsites with .net in the end ...
-
TP-Link 54Mbps Wireless Router - page 52
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 44 To add or modify a MAC Address Filter ing entry, follow these instructions: 1. Enter the appropriat e MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is an y hexadecimal digit). For example: 00-0E-AE-B0-00-0B. 2. Type the des cription of the PC in t ...
-
TP-Link 54Mbps Wireless Router - page 53
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 45 ¾ Web Management Port - Web browser access normally uses the standard HTTP service port 80. This router’s default remo te management Web port number is 80 . For greater security, you can change the remote management Web interface to a custom port by entering that number in this box provi ded ...
-
TP-Link 54Mbps Wireless Router - page 54
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 46 60 seconds in the pull-down list. The Packets Statistic interval value indicates the time section of the packets statistic. The resu lt of the statistic used for analysis by SYN Flood , UDP Flood and ICMP-Flood . ¾ DoS protection - Enable or Disable the DoS protection function. Only when it is ...
-
TP-Link 54Mbps Wireless Router - page 55
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 47 will regain the capability to access Internet. Click the Return button to return to the Advanced Security page. 3.9 IP & MAC Binding Setting Figure 3-45 the IP & MAC Binding menu There are two submenus under the IP &MAC Binding menu (shown in Figure 3- 45 ): Binding Setting and ARP ...
-
TP-Link 54Mbps Wireless Router - page 56
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 48 Figure 3-47 IP & MAC Bin ding Setting (Add & Modify) To add IP & MAC Binding entries: 1. Click the Add New.. button. 2. Enter the MAC Address and IP Address. 3. Select the Bind checkbox. 4. Click the Save button to save it. To modify or delete an existing entry : 1. Find the desired ...
-
TP-Link 54Mbps Wireless Router - page 57
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 49 3.9.2 ARP List To manage the computer, you could observe the computers in the LAN by checking the relationship of MAC address and IP address on the ARP list, and you could configure the items on the ARP list also. This page displays the ARP Li st; it shows all the existing IP & MAC Binding ...
-
TP-Link 54Mbps Wireless Router - page 58
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 50 Figure 3-50 S tatic Routing To add static routing entries: 1. Click the Add New button. (pop-up Figure 3-51 ) 2. Enter the following data: ¾ Destination IP Address - The Destination IP Address is the address of the network or host that you want to assign to a static route. ¾ Subnet Mask - The ...
-
TP-Link 54Mbps Wireless Router - page 59
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 51 3.11 DDNS The router offers a Dynamic Domain Name System ( DDNS ) feature. DDNS lets you ass ign a fixed host and domain name to a dynamic Internet IP Addr ess. It is useful w hen you are hosting your own website, FTP server, or other server behind the router. Before using this feature, you nee ...
-
TP-Link 54Mbps Wireless Router - page 60
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 52 Figure 3-53 Oray .net DD NS Settings To set up for DDNS, follow these instructions: 1. Type the User Name for your DDNS account. 2. Type the Password for your DDNS account. 3. Click the Login button to login the DDNS service. ¾ Connection Status - The status of the DDNS servic e connection is ...
-
TP-Link 54Mbps Wireless Router - page 61
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 53 Figure 3-54 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: 1. Type the domain names your dynamic DNS service provider gave. 2. Type the User Name for your DDNS account. 3. Type the Password for your DDNS account. 4. Click the Login button to login to the DDNS service. ¾ ...
-
TP-Link 54Mbps Wireless Router - page 62
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 54 explanations for each submenu are provide d below. 3.12.1 Time You can set time manually or get GMT from the Internet for the router on this page (shown in Figure 3-56 ): Figure 3-56 T ime settings ¾ Time Zone - Select your local time zone from this pull down list. ¾ Date - Enter your local d ...
-
TP-Link 54Mbps Wireless Router - page 63
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 55 3.12.2 Firmware The page (shown in Figure 3-57 ) allo ws you to upgrade the latest version firmware to keep you r router up-to-date. Figure 3-57 Firmware Upgrade New firmware is posted at www.tp-link.com and can be downloaded for free. If the router is not experiencing difficulties, there is no ...
-
TP-Link 54Mbps Wireless Router - page 64
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 56 Figure 3-58 Restore Factory Default Click the Restore button to reset all configuration settings to their default values. ¾ The default User Name: admin ¾ The default Password: admin ¾ The default IP Address: 192.168.1.1 ¾ The default Subnet Mask: 255.255.255.0 ) Note: Any settings you have ...
-
TP-Link 54Mbps Wireless Router - page 65
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 57 Figure 3-60 Reboot the router Click the Reboot button to reboot the router. Some settings of the router will take effect only after rebooting, which include: ¾ Change LAN IP Address. (Sys tem will reboot automatically) ¾ MAC Clone (system will reboot automatically) ¾ DHCP service function. ? ...
-
TP-Link 54Mbps Wireless Router - page 66
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 58 3.12.7 Log This page (shown in Figure 3-62 ) allows you to query the logs of the router. Figure 3-62 System Log The router can keep logs of all traffic. You c an query the logs to find what happened to the router. Click the Refresh button to refresh the logs. Click the Clear Log button to clear ...
-
TP-Link 54Mbps Wireless Router - page 67
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 59 ineffective. ¾ Packet s Statistics Interval - The default value is 10. Select a value between 5 and 60 seconds in the pull-down list. The Packets Statisti c interval indicates t he time section of the packets statistic. ¾ Sorted Rules - Here displays sort as desired. Statistics Table: IP Addr ...
-
TP-Link 54Mbps Wireless Router - page 68
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 60 Appendix A: Glossary Access Point - A device that allows wireless-equipped computers and other devices to communicate with a wired network. Also us ed to expand the range of a wireless network. Ad-hoc Netw ork - An ad-hoc network is a group of co mputers, each with a wireless adapter, connected ...
-
TP-Link 54Mbps Wireless Router - page 69
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 61 Appendix B: Specifications General Standards and Protocols IEEE 802.3,IEEE 802.3u, IEEE 802.11b and IEEE 802.11g TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP Safety & Emission FCC 、 CE LEDs Power, SYS, WLAN, WAN, 1-4 Ports One 10/100M Auto-Negotiation WAN RJ45 port, Four 10/100M Auto-Negotiation ...
-
TP-Link 54Mbps Wireless Router - page 70
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Appendix C: FAQ 1. How do I configure the router to access Internet by ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Connect the Ethernet cable from your ADSL Modem to the WAN port on the router. The telephone cord plugs into the Line port of the ADSL Modem. ...
-
TP-Link 54Mbps Wireless Router - page 71
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 63 register, login to the router and click the "Net work" menu link on the left of your browser, and then click "MAC Clone" submenu link. On the "MAC Clone" page, if your PC’s MAC address is proper MAC address, click the "C lone MAC Address" button and you ...
-
TP-Link 54Mbps Wireless Router - page 72
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 64 5. I w ant to build a WEB Server on the LAN, w hat should I do? Because the WEB Server port 80 will interfere with the WEB management port 80 on the router, you must change the WEB management port number to avoid interference. To change the WEB management port number: Login to the router, click ...
Do you have a question concerning TP-Link 54Mbps Wireless Router?
Use the form below
If you did not solve your problem by using a manual TP-Link 54Mbps Wireless Router, ask a question using the form below. If a user had a similar problem with TP-Link 54Mbps Wireless Router it is likely that he will want to share the way to solve it.