Manual Nady Systems MXE-1212

15 pages 0.56 mb
Download

Go to site of 15

Summary
  • Nady Systems MXE-1212 - page 1

    MXE-1212 12 Channel Mic/Line Mixer with Internal DSP Effects OWNER’S MANUAL ...

  • Nady Systems MXE-1212 - page 2

    2 MXE-1212 12-CHANNEL MIC/LINE MIXER WITH INTERNAL DSP EFFECTS Congratulations on your choice of mixers — you have pur- chased one of the finest compact mixing consoles on the market today . This unit was developed using the expertise of professional sound engineers and working musicians. Y ou will find that your new NADY AUDIO MXE-1212 has super ...

  • Nady Systems MXE-1212 - page 3

    W ARNING 3 IMPORT ANT SAFETY INSTRUCTIONS When using this electronic device, basic precautions should always be taken, including the following: 1. Read all instructions before using the product. 2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, etc.). 3. This product sho ...

  • Nady Systems MXE-1212 - page 4

    FEA TURES 4 The MXE-1212 is a compact, versatile console or rackmountable mixer with 16 built-in selectable DSP echo and reverb effects that is ideal for many small venue, live sound reinforcement applications • Superb performance with low noise and smooth, transpar- ent audio across the full audio spectrum and natural sound- ing selectable echo/ ...

  • Nady Systems MXE-1212 - page 5

    5 INST ALLA TION T o ensure years of enjoyment from your NADY AUDIO MXE-1212 mixing console, please read and understand this manual thoroughly before using the unit. 1. INSPECTION Y our NADY AUDIO MXE-1212 was carefully packed at the factory in packaging designed to protect the units in shipment. Before installing and using your unit, carefully exa ...

  • Nady Systems MXE-1212 - page 6

    CONTROLS AND CONNECTIONS 6 (1) MIC INPUT The Mic input is an elec- tronically balanced XLR type designed to accept signals from any bal- anced low impedance (Low Z) microphone. T o accommodate condenser microphones, this input is also equipped with +48VDC phantom power globally switchable to all XLR input jacks with the Phantom Power switch (38) on ...

  • Nady Systems MXE-1212 - page 7

    CONTROLS AND CONNECTIONS nates when a channel is going into overload. It detects the peak level after the EQ and will light at approximately 5dB before clipping to warn that the signal is approaching overload. Y ou do not want the Peak LED to light except very intermittently during a take or a mix. If it does light persistently , reduce input gain ...

  • Nady Systems MXE-1212 - page 8

    CONTROLS AND CONNECTIONS 8 2. STEREO INPUT SECTION (12A) L (MONO) LINE INPUT On stereo input channels 5-12, the 1/4 ” line inputs are designed for stereo or mono line-level signals such as those from key- boards, drum machines, CD players, tape decks, or samplers. However , these inputs can also be used as standard mono line inputs by connecting ...

  • Nady Systems MXE-1212 - page 9

    CONTROLS AND CONNECTIONS 9 3. MASTER SECTION a. AUX Send/Return Function and Operation (18) AUX RETURN (29) AUX RETURN CONTROL The Aux Return jack enables a convenient input to the left and right Master Mix busses. If you connect a signal to the Return jack, the Aux Return will operate in mono and the sig- nal will be routed to the Aux Return Contr ...

  • Nady Systems MXE-1212 - page 10

    CONTROLS AND CONNECTIONS 10 c. Digital Echo Effects Function and Operation (22) EFFECTS DISPLA Y (23) ECHO EFFECT SELECT BUTTONS (30) EFFECT SEND (31) EFFECT (ECHO) REPEA T (32) EFFECT P AN (33) EFFECT PFL (26) EFFECT F ADER The built-in DSP (Digital Sound Processor) offers 16 different preset level and echo intervals selectable by the Echo Effect ...

  • Nady Systems MXE-1212 - page 11

    BACK P ANEL CONTROLS AND CONNECTIONS 11 Check the power source for the voltage (1 15V AC or 230V AC) in your area and switch the Power Selector switch (40) to select the proper voltage. Once you have con- nected the AC power cord (39) to the AC power source, switch on your mixer with the Power On switch (36) . The Power ON LED (20) will light up. A ...

  • Nady Systems MXE-1212 - page 12

    CONNECTIONS This NADY AUDIO mixer uses 4 different types of audio connectors for the various input/output connections: (1) XLR bal- anced; (2) 1/4” TRS phone jacks for balanced, unbalanced, stereo, or in/out inserts; (3) 1/4” TS unbalanced; (4) RCA pin unbalanced 1 2 3 2 1 3 Figures 1. Balanced XLR input/output connections 2. Stereo headphone c ...

  • Nady Systems MXE-1212 - page 13

    SPECIFICA TIONS 13 The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice. 3. FREQUENCY RESPONSE ANY INPUT T O ANY OUTPUT ....................20 Hz to 20 KHz =/- 3dB @ 0 dBm 4. TOT AL HARMONIC ...

  • Nady Systems MXE-1212 - page 14

    BLOCK DIAGRAM 14 ...

  • Nady Systems MXE-1212 - page 15

    NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET , EMERYVILLE, CA 94608 T el: 510.652.2411 • Fax: 510.652.5075 • www .nadywireless.com SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via tele- phone at (510) 652-241 1, or e-mail at service@nadywireless.com. (Inte ...

Manufacturer Nady Systems Category Network Card

Documents that we receive from a manufacturer of a Nady Systems MXE-1212 can be divided into several groups. They are, among others:
- Nady Systems technical drawings
- MXE-1212 manuals
- Nady Systems product data sheets
- information booklets
- or energy labels Nady Systems MXE-1212
All of them are important, but the most important information from the point of view of use of the device are in the user manual Nady Systems MXE-1212.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Nady Systems MXE-1212, service manual, brief instructions and user manuals Nady Systems MXE-1212. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Nady Systems MXE-1212.

A complete manual for the device Nady Systems MXE-1212, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Nady Systems MXE-1212 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Nady Systems MXE-1212.

A complete Nady Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Nady Systems MXE-1212 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Nady Systems MXE-1212, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Nady Systems MXE-1212, that we can find in the current document
3. Tips how to use the basic functions of the device Nady Systems MXE-1212 - which should help us in our first steps of using Nady Systems MXE-1212
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Nady Systems MXE-1212
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Nady Systems MXE-1212 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Nady Systems MXE-1212?

Use the form below

If you did not solve your problem by using a manual Nady Systems MXE-1212, ask a question using the form below. If a user had a similar problem with Nady Systems MXE-1212 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)