Manual Planar PR5020

54 pages 4.55 mb
Download

Go to site of 54

Summary
  • Planar PR5020 - page 1

    ...

  • Planar PR5020 - page 2

    Planar Systems, Inc. Corporate Headquarters 1195 NW Compton Drive Beaverton, OR 97006-1992 Planar Customer Support Telephone: US: 1-866-PLANAR1 (866) 752-6271 Outside US: (503) 748-5799 E-mail: PlanarSupport@planar.com Online Technical Library: http://www.planar.com/support Hours: M-F, 8am - 8pm ET, 12pm - 12am GMT – i – ...

  • Planar PR5020 - page 3

    User’s Manual — ii — Copyright This publication, including all photographs, illustratio ns and software, is protected under international copy- right laws, with all rights reserved. Neither this man ual, nor any of the material contained herein, may be reproduced without written consent of the autho r. © Copyright June, 2006 Disclaimer The i ...

  • Planar PR5020 - page 4

    Preface – iii – Important Safety Information Congratulations on purchasing the Plan ar DLP® projector! Important: It is strongly recommended that you read this sect ion carefully be fore using the projector. These safety and usage instructions will ensure that you enj oy many years of safe use of the pr ojector. Keep this manual for future ref ...

  • Planar PR5020 - page 5

    User’s Manual Power Safety ¾ Only use the supplied power cord. ¾ Do not place anything on the powe r cord. Place the power cord where it will not be in the way of foot traffic. ¾ Remove the batteries from the remote control whe n storing o r not in use for a prolonged period. Replacing the Lamp Replacing the lamp can be hazardou s if done inco ...

  • Planar PR5020 - page 6

    Preface Main Features • Lightweight unit, easy to p ack away and transport • Compatible with all m ajor video stan dards including NTSC, P AL, and SECAM • A high brightness rating allows for present ations in daylight or in lit rooms • Supports resolution s up to SXGA+ at 16.7 million colors to deliver crisp , clear images • Flexible setu ...

  • Planar PR5020 - page 7

    User’s Manual — vi — Table of contents GETTING STARTED .......................................................................................................................................................... 1 P ACKING C HECKLIST ................................................................................................................ ...

  • Planar PR5020 - page 8

    Preface – vii – PR5020 Projecti on di st a nce and size tabl e ................................................................................................................... 42 T IMING M ODE T ABLE ............................................................................................................................................... ...

  • Planar PR5020 - page 9

    – 1 – G ETTING S TARTED Packing Checklist Carefully unpack the projector and check that the following items are included: DLP® PROJECTOR R EMOTE CONTROL ( W ITH TWO AAA BATTERIES ) P OWER CORD USB CABLE (USB TYPE A- TO -B USB) C OMPOSITE VIDE O CABLE (RCA 3- TO -R CA 3) C OMPUTER CAB LE (VGA-VGA) A UDIO CABLE ( MINI JACK - TO - MINI JACK ) CD- ...

  • Planar PR5020 - page 10

    User’s Manual Views of Projector Parts Front-right View I TEM L ABEL D ESCRIPTIO N S EE PAGE : 1. Focus Focuses the projected image 17 2. Lens zoom Enlarges the projected image 17 3. Screws Holds lamp to projector 4. See “Top view—OSD buttons and LEDs” 3 5. Front IR receiver Receiver for IR signal from remote control 7 6. Lens Slide lens ca ...

  • Planar PR5020 - page 11

    DLP® Projector – User’s Manual – 3 – I TEM L ABEL D ESCRIPTIO N S EE PAGE : 8. Height-adjuster button Push to release height adjuster 16 Important: Ventilation openings on the projector allow for good air circulation, which keeps the proje ctor lamp cool. Do not obstruct any of the ventilation openings. Top view—On-screen Display (OSD) b ...

  • Planar PR5020 - page 12

    User’s Manual – 4 – I TEM L ABEL D ESCRIPTIO N S EE PAGE : 7. VOL+/ Right cursor Increases volume Navigates and changes settings in the OSD 18 8. Auto Optimizes image size, position, and resolution Navigates and changes settings in the OSD 9. Menu Opens and exits the OSD 10. Source Detects the input device 11. Power Turns the projector on or ...

  • Planar PR5020 - page 13

    DLP® Projector – User’s Manual Rear view I TEM L ABEL D ESCRIPTIO N S EE PAGE : 1. Rear IR receiver Receiver for IR signal from remote control 7 2. DVI-D (For PR5020 only) Connect a DVI-D cable (not supplied) from a computer 3. VGA IN Connect a VGA cable (supplied) from a computer 4. VGA OUT Connect to a monitor (not supplied) 5. S-video Conne ...

  • Planar PR5020 - page 14

    User’s Manual – 6 – I TEM L ABEL D ESCRIPTIO N S EE PAGE : 14. Security Lock Secure to permanent object with a Kensington® Lock system 36 Note: If your video equipment has both S-video and RCA jacks (composite video) connect to the S-video connector. S-video provides a better quality signal. Bottom view I TEM L ABEL D ESCRIPTIO N S EE PAGE : ...

  • Planar PR5020 - page 15

    DLP® Projector – User’s Manual Remote Control Par ts Important: 1. Avoid using the projector with bright fluoresc ent lighting turned on. Certain high-frequency fluo- rescent lights can disrupt remote control operation. 2. Be sure nothing obstructs the path between the re mote control and the proj ector. If the path be- tween the remote contro ...

  • Planar PR5020 - page 16

    User’s Manual – 8 – I TEM L ABEL D ESCRIPTION S EE PAGE : 7. Page Down Page down when connected through USB to a PC 8. Up cursor 9. Right cursor 10. Down cursor Navigates and changes settings in the OSD 18 11. Volume +/- Adjusts volume 17 12. Mute Mutes the built-in speaker 13. Zoom+ Zoom in 14. Zoom- Zoom out 15. Freeze Freeze/unfreezes the ...

  • Planar PR5020 - page 17

    DLP® Projector – User’s Manual Remote Control Operating Range The remote control uses infrared transmission to cont rol the projector. It is not necessary to point the remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or the rear of the projector, the re mote will function well within a radi u ...

  • Planar PR5020 - page 18

    – 10 – S ETUP AND O PERATION Inserting the Remote Control Batteries 1. Remove the battery compartment cover by sliding the cover in the direction of the arrow. 2. Insert the supplied batteries taking note of the polarity (+/-) as shown here. 3. Replace the cover. Caution: 1. Only use AAA alkaline batteries. 2. Dispose of used batteries accordi ...

  • Planar PR5020 - page 19

    DLP® Projector – User’s Manual Connecting Input Devices A PC or notebook computer as well as video devices can be connected to the projector at the same time. Video devices include DVD, VCD, and VHS play ers, as well as movie camcorders and digital still cameras. Check the user manual of the connec ting device to confirm it has the appropriate ...

  • Planar PR5020 - page 20

    User’s Manual – 12 – Warning: As a safety precaution, disconnect all power to the projector and connecti ng devices before making connections. ...

  • Planar PR5020 - page 21

    DLP® Projector – User’s Manual Starting and Shutting down t he Projec tor 1. Slide the lens cover. 2. Connect the power cord to the projector [A] Connect the other end to a wall outlet. Switch [B] from on (O) to off ( — ) 3. The POWER and READY LEDs on the pro- jector turn on. Turn on the connected devices. 4. Ensure the Ready LED is on a st ...

  • Planar PR5020 - page 22

    User’s Manual 7. When the “Power Off?/Press Power again” message appears, press the Power button. The projector turns off. 8. Turn off the main Power switch when the Ready LED stops flashing. Caution: Do not unplug the power cord until the Ready LE D stops flashing, indica ting the projector has cooled down. – 14 – ...

  • Planar PR5020 - page 23

    DLP® Projector – User’s Manual Setting an Access Password (Security L ock) You can use the cursor (arrow) buttons to set a password and prev ent unauthorized use of the pro- jector. When enabled, the password must be ent ered after you power on the projector. (See “Navigating the OSD” on page 18 and “Setting the OSD Langu age” on page ...

  • Planar PR5020 - page 24

    User’s Manual Adjusting the Projector Level Take note of the following when setting up the projector: • The projector t able or stand should be level and sturdy . • Position the projector so that it is perpendicular t o the screen. • Be sure cables are not in the way or can cause the projector to be knocked over . 1. To raise the level of t ...

  • Planar PR5020 - page 25

    DLP® Projector – User’s Manual Adjusting the Zoom, Focus and Keystone 1. Use the Image-zoom con- trol (on the projector only) to resize the projected im- age and screen size. B 2. Use the Image-focus con- trol (on the projector only) to sharpen the projected image A . 3. Press the Keystone button on the remote control. The keystone control ap- ...

  • Planar PR5020 - page 26

    User’s Manual – 18 – O N -S CREEN D ISPLAY (OSD) M ENU S ETTINGS OSD Menu Controls The projector has an OSD that lets you ma ke image adjustments and c hange various settings. Navigating the OSD You can use the remote control curs or buttons or the buttons on the top of the projector to navigate and make changes to the OSD. The following illu ...

  • Planar PR5020 - page 27

    DLP® Projector – User’s Manual Setting the OSD Language You may want to reference the OSD on your projec tor while reading this section. Set the OSD lan- guage to your preference before continui ng. (The default language is English.) 1. Press the Menu button. The Main menu appears. 2. Press the cursor button until Tool is highlighted. 3. Press ...

  • Planar PR5020 - page 28

    User’s Manual Setting the OSD Language Use the following illustration to quickly find a setting or determine the range for a setting. – 20 – ...

  • Planar PR5020 - page 29

    DLP® Projector – User’s Manual Main Menu Press the Menu button to open the OSD menu. Press the cursor button to move to the Main menu. Press the cursor button to move up and down in the Main menu. Pre ss to change values for settings, and then press Enter or to confirm the new setting. I TEM D ESCRIPTIO N D EFAULT Brightness Press the cursor b ...

  • Planar PR5020 - page 30

    User’s Manual – 22 – Main Menu Functions Available for Connected Source Function RGB DVI Component Video Composite Video S-video Brightness x x x x x Contrast x x x x x Sharpness x x x x x Color Temp x x x x x Color Saturation x x x Color Tint x x x Gamma x x x x x Color Space x x x x x Reset x x x x x x = available to video source ...

  • Planar PR5020 - page 31

    DLP® Projector – User’s Manual Setup Menu Press the Menu button to open the OSD menu. Press the cursor button to move to the Setup menu. Press the cursor button to move up and down in the Setup menu. Press to change values for settings, and then press Enter or to confirm the new setting. I TEM D ESCRIPTIO N D EFAULT Horizontal Position Press t ...

  • Planar PR5020 - page 32

    User’s Manual – 24 – Function RGB DVI Component Video Composite Video S-video Reset x x x x x x = available to video source Advance Feature Press the Menu button to open the OSD menu. Press to move to the Setup menu. Press to move to the Advance Feature menu and then press Enter or . Press to move up and down in the Advance Feature menu. Pres ...

  • Planar PR5020 - page 33

    DLP® Projector – User’s Manual – 25 – I TEM D ESCRIPTIO N D EFAULT Security Lock Press the cursor button to enable or disable Security Lock. When you enable Security Lock a Register Password dialog box appears: You can only use the following four cursor buttons, in the password fields. Press the cursor buttons five times in any order and c ...

  • Planar PR5020 - page 34

    User’s Manual User Color Press the Menu button to open the OSD menu. Press to move to the Setup menu. Press to move to the Advance Feature menu and then press Enter or . Press to move to the User Color menu and then press Enter or . Press to move up and down to select a color. Press to change values for settings, and then press Enter or to confir ...

  • Planar PR5020 - page 35

    DLP® Projector – User’s Manual Config Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Config menu. Press the cursor button to move up and do wn in the Config menu. Press to change values for settings, and then press Enter or to confirm the new setting. I TEM D ESCRIPTIO N D EFAULT Blank Screen Press the ...

  • Planar PR5020 - page 36

    User’s Manual Utility Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Utility menu. Press the cursor button to move up and do wn in the Utility menu. Press to change values for settings, and then press Enter or to confirm the new setting. I TEM D ESCRIPTIO N D EFAULT Video Type Press the cursor button to s ...

  • Planar PR5020 - page 37

    DLP® Projector – User’s Manual – 29 – I TEM D ESCRIPTIO N D EFAULT Digital Zoom Digital operation for zoom and pan adjustment. Press En- ter or . The Zoom menu appears. Press to zoom in; press to zoom out. Press Enter or to open the Pan menu. (You m ust zoom in before you can open the Pan menu.) Use the cursor buttons to pan the zoomed ima ...

  • Planar PR5020 - page 38

    User’s Manual Tool Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Tool menu. Press the cursor button to move up and do wn in the Tool menu. Press Enter or to con- firm the new setting. I TEM D ESCRIPTIO N D EFAULT Language Press the cursor to select the desired language English Remote control test Follow ...

  • Planar PR5020 - page 39

    DLP® Projector – User’s Manual Status Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Status menu. Press the cursor button to move up and do wn in the Status menu. I TEM D ESCRIPTIO N D EFAULT Video Information Displays the resolution and refresh rate for RGB/DVI mode. Displays the color standard for vi ...

  • Planar PR5020 - page 40

    – 32 – M AINTENANCE AND S ECURITY Replacing the Projection Lamp The projection lamp should be replaced when it burns out. It should only be r eplaced with a certified replacement part, which you can order from your local dealer. Important: 1. The lamp contains a certain am ount of mercury and should be dis posed of according to local or- dinanc ...

  • Planar PR5020 - page 41

    DLP® Projector – User’s Manual 2. Open the lamp com- partment cover ( B ). B 3. Remove the two screws from the lamp module ( C ). 4. Lift the module handle up ( D ). – 33 – ...

  • Planar PR5020 - page 42

    User’s Manual 5. Pull firmly on the mod- ule handle to remove the lamp module ( D ) D 6. Reverse steps 1 to 5 to install the new lamp module. – 34 – ...

  • Planar PR5020 - page 43

    DLP® Projector – User’s Manual Resetting the Lamp After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following: 1. Press the Menu button to open the Main menu. 2. Press the cursor button to m ove to the Status menu. 3. Press the cursor button to move down to Lamp Hour Reset . 4. Press the cursor or Enter but ...

  • Planar PR5020 - page 44

    User’s Manual – 36 – Cleaning the Lens You can purchase optic lens cleaner from most camera stores . Refer to the following to clean the pro- jector lens. 1. Apply a little optic lens cleaner to a clean soft cloth. (Do not apply the cleaner directly to the lens.) 2. Lightly wipe the lens in a circular motion. Caution: 1. Do not use abrasive c ...

  • Planar PR5020 - page 45

    – 37 – T ROUBLESHOOTING Common problems and solut ions These guidelines provide tips to deal with problem s you may encounter while using the projector. If the problem remains unsolved, cont act your dealer for assistance. Often after time spent troubleshooting, the problem is traced to something as simple as a loose con- nection. Check the fol ...

  • Planar PR5020 - page 46

    User’s Manual – 38 – LED Error Messages E RROR CODE MESSAGE P OWER LED/ FLASHES R EADY LED/ FLASHES Lamp usage task created error 2 1 Environment usage task created error 2 2 Thermal break status error 3 0 T1 temperature over temperature 3 1 T1 sensor status fail 4 1 Lamp lit error 5 1 Ballast SCI error 5 2 Ballast UART error 5 3 Fan1 error ( ...

  • Planar PR5020 - page 47

    DLP® Projector – User’s Manual – 39 – 2. To ensure the problem is not cau sed by a connected PC’s vide o card, connect to a nother computer. Problem: The image is flat with no contrast Adjust the Contrast setting on the Main menu of the OSD. Problem: The color of the projected image does not match the source image. Adjust the Color Tempe ...

  • Planar PR5020 - page 48

    – 40 – S PECIFICATIO NS Input/output connectors PR3010 PR3020 PR5020 × × DVI-D Data in RGB HD-15 Data out RGB HD-15 composite video (RCAx1) Video S-video Stereo RCAx2 (L+R) Audio in Stereo Mini-jack Audio out Stereo Mini-jack × × RS-232 Control USB Security Kensington lock ...

  • Planar PR5020 - page 49

    DLP® Projector – User’s Manual Projection Distance V.S. Projection Size A B C D L Projection Distance PR3020 and PR3010 Projection distance and size table Max. Screen Size (Wide) 1.89 Max. Screen Size (Tele) 2.18 Projection Distance L Diagonal Width A Height C Diagonal Width B Height D 1.00 m 0.66 m 0.53 m 0.40 m 0.57 m 0.46 m 0.34 m 3.28 &apo ...

  • Planar PR5020 - page 50

    User’s Manual – 42 – 22.96 ' 182.27 '' 145.82 '' 109.36 '' 158.02 '' 126.42 '' 94.81 '' 10.00 m 6.61 m 5.29 m 3.97 m 5.73 m 4.59 m 3.44 m 32.80 ' 260.38 '' 208.31 '' 156.23 '' 225.75 '' 180.60 '' 135.45 '' PR5020 P ...

  • Planar PR5020 - page 51

    DLP® Projector – User’s Manual – 43 – Timing Mode Table The projector can display several resolutions. The following table outlines the resolutions that can be displayed by the projector. Signal Resolution Frequency H. (KHz) Frequency V. (Hz) Video Digital Analog NTSC - 15.734 60.0 Ο - - PAL/SECAM - 15.625 50.0 Ο - - 640 x 35 ...

  • Planar PR5020 - page 52

    User’s Manual Projector Dimensions 300 mm(1 1.8") 96 mm(3.8") 244 mm(9.6") – 44 – ...

  • Planar PR5020 - page 53

    – 45 – R EGULATORY C OMPLIANCE FCC Warning This equipment has been tested and found to comply wi th the limits for a Class B digital device pur- suant to Part 15 of the FCC Rules. These lim its are designed to provide reasonable protection against harmful interference when the equipm ent is operated in a commercial environment. This equipment g ...

  • Planar PR5020 - page 54

    Planar Systems, Inc. Corporate Headquarters 1195 NW Compton Drive Beaverton, OR 97006-1992 Planar Customer Support Telephone: US: 1-866-PLANAR1 (866) 752-6271 Outside US: (503) 748-5799 E-mail: PlanarSupport@planar.com Online Technical Library: http://www.planar.com/support Hours: M-F, 8am - 8pm ET, 12pm - 12am GMT © 2006 Planar Systems, Inc. Plan ...

Manufacturer Planar Category Projection Television

Documents that we receive from a manufacturer of a Planar PR5020 can be divided into several groups. They are, among others:
- Planar technical drawings
- PR5020 manuals
- Planar product data sheets
- information booklets
- or energy labels Planar PR5020
All of them are important, but the most important information from the point of view of use of the device are in the user manual Planar PR5020.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Planar PR5020, service manual, brief instructions and user manuals Planar PR5020. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Planar PR5020.

Similar manuals

A complete manual for the device Planar PR5020, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Planar PR5020 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Planar PR5020.

A complete Planar manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Planar PR5020 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Planar PR5020, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Planar PR5020, that we can find in the current document
3. Tips how to use the basic functions of the device Planar PR5020 - which should help us in our first steps of using Planar PR5020
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Planar PR5020
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Planar PR5020 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Planar PR5020?

Use the form below

If you did not solve your problem by using a manual Planar PR5020, ask a question using the form below. If a user had a similar problem with Planar PR5020 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)