Manual Fujitsu Siemens Computers M5000

162 pages 2.21 mb
Download

Go to site of 162

Summary
  • Fujitsu Siemens Computers M5000 - page 1

    Dynamic Reconfiguration (DR) User’s Guide SPARC Enterprise M4000 / M5000 / M8000 / M9000 Servers Englis h ...

  • Fujitsu Siemens Computers M5000 - page 2

    ...

  • Fujitsu Siemens Computers M5000 - page 3

    SP ARC ® Enter pr ise M4000/M5000/M8000/M9000 Ser v ers Dynamic Reconfiguration (DR) User's Guide Order No . U41684-J-Z816-2-76 P ar t No .819-7898-11 September 2007, Revision A ...

  • Fujitsu Siemens Computers M5000 - page 4

    Please Recycle Copyright 2007 FUJITSU LIMITED, 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki-shi, Kanagawa-ken 21 1-8588, Japan. All rights reserved. Sun Microsystems, Inc. pr ovided technical input and review on portions of this material. Sun Microsystems, Inc. and Fujitsu Limited each own or control intellectual pr operty rights relating to pr ...

  • Fujitsu Siemens Computers M5000 - page 5

    Copyright 2007 FUJITSU LIMITED, 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki-shi, Kanagawa-ken 21 1-8588, Japon. T ous droits réservés. Entrée et revue tecnical fournies par Sun Microsystems, Incl sur des parties de ce matériel. Sun Microsystems, Inc. et Fujitsu Limited détiennent et contrôlent toutes deux des dr oits de propriété intel ...

  • Fujitsu Siemens Computers M5000 - page 6

    ...

  • Fujitsu Siemens Computers M5000 - page 7

    v Contents Preface xiii 1. Overview of Dynamic Reconf iguration 1–1 1.1 DR 1–1 1.2 Basic DR Functions 1–5 1.2.1 Adding a System Board 1–6 1.2.2 Deleting a System Board 1–6 1.2.3 Moving a System Board 1–6 1.2.4 Replacing a System Board 1–7 1.3 Security 1–7 1.4 Overview of DR User Interfaces 1–7 2. What Y ou Must Know Before Using D ...

  • Fujitsu Siemens Computers M5000 - page 8

    vi SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 2.1.4 Checklists for System Configuration 2–1 1 2.1.5 Reservation of Domain Configuration Changes 2–12 2.2 Conditions and Settings Using XSCF 2–12 2.2.1 Conditions Using XSCF 2–12 2.2.2 Settings Using XSCF 2–13 2.2.2.1 Configuration Policy Option 2 ...

  • Fujitsu Siemens Computers M5000 - page 9

    Contents vii 2.5.6 XSCF Failover 2–29 2.5.7 Kernel Memory Board Deletion 2–29 2.5.8 Deletion of Board with DVD Drive 2–30 3. DR User Interface 3–1 3.1 How T o Use the DR User Interface 3–1 3.1.1 Displaying Domain Information 3–2 3.1.2 Displaying Domain Status 3–5 3.1.3 Displaying System Board Information 3–6 3.1.4 Displaying Device ...

  • Fujitsu Siemens Computers M5000 - page 10

    viii SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 4.5 Examples: Replacing a System Board 4–12 4.5.1 Example: Replacing a Uni-XSB System Board 4–13 4.5.2 Example: Replacing a Quad-XSB System Board 4–16 4.6 Examples: Reserving Domain Configuration Changes 4–20 4.6.1 Example: Reserving a System Board ...

  • Fujitsu Siemens Computers M5000 - page 11

    ix Figur es FIGURE 1-1 Uni-XSB and Quad-XSB (Midrange Servers) 1–2 FIGURE 1-2 Uni-XSB and Quad-XSB (High-end Servers 1–3 FIGURE 1-3 DR Processing Flow 1–5 FIGURE 2-1 Example of Hardware Configuration (with Uni-XSB of Midrange Server) 2–2 FIGURE 2-2 Example of Hardware Configuration (with Quad-XSBs of Midrange Server) 2–3 FIGURE 2-3 Exampl ...

  • Fujitsu Siemens Computers M5000 - page 12

    x SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 FIGURE 4-10 Example: Reserve a System Board Add 4–20 FIGURE 4-11 Example: Reserving a System Board Delete 4–22 FIGURE 4-12 Example: Reserving a System Board Move 4–23 ...

  • Fujitsu Siemens Computers M5000 - page 13

    xi T ables T ABLE 1-1 Basic DR Terms 1–3 T ABLE 1-2 Terms Related to Hardware Configurations 1–4 T ABLE 2-1 Unit of Degradation 2–14 T ABLE 2-2 Domain Status 2–18 T ABLE 2-3 System Board Management Items 2–18 T ABLE 2-4 System Board Management Items 2–19 T ABLE 3-1 DR Display Commands 3–1 T ABLE 3-2 DR Operation Commands 3–2 T ABLE ...

  • Fujitsu Siemens Computers M5000 - page 14

    xii SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 T ABLE 3-15 Options of the moveboard Command 3–20 T ABLE 3-16 DR Display Commands 3–25 T ABLE 3-17 DR Operation Commands 3–25 T ABLE 3-18 DR-related Commands 3–26 ...

  • Fujitsu Siemens Computers M5000 - page 15

    Preface xiii Pr eface This manual describes the Dynamic Reconfiguration (DR hereafter) function provided by SP ARC Enterprise servers. This manual is intended for users, specifically system management administrators who conduct operations on systems and domains. In addition, before r eading this manual, it is necessary to have read the Servers Over ...

  • Fujitsu Siemens Computers M5000 - page 16

    xiv SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 Audience This manual is intended for users, who administrate SP ARC Enterprise M4000/M5000/M8000/M9000 servers (hereinafter refer enced to as XSCF user). The XSCF user is requir ed to have the following knowledge: ■ Solaris TM Operating System and Unix co ...

  • Fujitsu Siemens Computers M5000 - page 17

    Preface xv Glossary and Index ■ Glossary The glossary explains the terms used in this manual ■ Index The index provides keywor ds and corresponding r eference page numbers so that the reader can easily sear ch for items in this manual as necessary . SP ARC Enterprise Mx000 Servers Documentation The manuals listed below are pr ovided for refer e ...

  • Fujitsu Siemens Computers M5000 - page 18

    xvi SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 Note – " x " in the order number is the version number of the manual. 1. Manuals on the W eb The latest versions of all the SP ARC Enterprise Series manuals are available at the following websites. http://manuals.fujitsu-siemens.com/ 2. Provided ...

  • Fujitsu Siemens Computers M5000 - page 19

    Preface xvii Contact the field engineer . The following files or document are pr ovided. i. Firmware pr ogram file (XSCF Control Package (XCP) f ile) ii. XSCF extension MIB definition file Note – XSCF Control Package (XCP) : XCP is a package which has the contr ol programs of har dware that conf igures a computing system. The XSCF f irmware and t ...

  • Fujitsu Siemens Computers M5000 - page 20

    xviii SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 Models The model names used in this manual are as follows. T ext Conventions This manual uses the following fonts and symbols to express specif ic types of information. Server class Model name Midrange SP ARC Enterprise M4000 SP ARC Enterprise M5000 High- ...

  • Fujitsu Siemens Computers M5000 - page 21

    Preface xix Pr ompt Notations The prompt notations used in this manual are as follo ws. Syntax of the Command Line Interface (CLI) The command syntax is described below . Command syntax The command syntax is as follows: ■ A variable that requir es input of a value must be enclosed in <>. ■ An optional element must be enclosed in []. ■ A ...

  • Fujitsu Siemens Computers M5000 - page 22

    xx SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 ■ The command syntax is shown in a frame such as this one. Example:: Softwar e License The function to explain in this manual uses the softwares of GPL,LGPL and others. For the information of the license, see Appendix E, "Software License Condition&qu ...

  • Fujitsu Siemens Computers M5000 - page 23

    Preface xxi Reader's Comment Form ...

  • Fujitsu Siemens Computers M5000 - page 24

    xxii SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 FOLD AND T APE FOLD AND T APE BUSINESS REPLY MAIL FIRST -CLASS MAIL PERMIT NO 74 1 SUNNYV ALE CA NO POST AGE NECESSAR Y IF MAILED IN THE UNITED ST ATES POST AGE WILL BE P AID BY ADDRESSEE FUJITSU COMPUTER SYST EMS AT T E N T I O N ENGINEERING OPS M/S 249 1 ...

  • Fujitsu Siemens Computers M5000 - page 25

    1-1 CHAPTER 1 Overview of Dynamic Reconf iguration This chapter provides an overview of Dynamic Reconfiguration, which is controlled by the eXtended System Control Facility (XSCF). 1.1 DR Dynamic Reconfiguration (r eferred to as DR, in this document) enables har dware resour ces such as processors, memory , and I/O to be added and deleted even whil ...

  • Fujitsu Siemens Computers M5000 - page 26

    1-2 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 into four boards is called a Quad-XSB. Each composition of physical unit of the divided PSB is called an eXtended System Board (XSB). These XSBs can be combined freely to cr eate domains. DR functions on these servers are performed on an XSB. This manual us ...

  • Fujitsu Siemens Computers M5000 - page 27

    Chapter 1 Overview of Dynamic Reconfiguration 1-3 FIGURE 1-2 Uni-XSB and Quad-XSB (High-end Servers T ABLE 1-1 and T ABLE 1-2 list DR-related terms. T ABLE 1-1 Basic DR T erms T erm Definition Add T o connect a system board to a domain and conf igure it into the Solaris OS of the domain. Delete T o unconfigur e a system board fr om the Solaris OS o ...

  • Fujitsu Siemens Computers M5000 - page 28

    1-4 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 Unconfigur e T o unconfigur e a system board in the Solaris OS. Reserve T o reserve a system board such that it is assigned to or unassigned from a domain on the next r eboot or power-cycle. Install T o insert a system board into a system. Remove T o remove ...

  • Fujitsu Siemens Computers M5000 - page 29

    Chapter 1 Overview of Dynamic Reconfiguration 1-5 1.2 Basic DR Functions This section describes the basic DR functions. FIGURE 1-3 shows DR processing. FIGURE 1-3 DR Pr ocessing Flow System board The hardwar e resour ces of a PSB or an XSB. A System board is used to describe the hardwar e r esources for operations such as domain construction and id ...

  • Fujitsu Siemens Computers M5000 - page 30

    1-6 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 In the example shown in FIGURE 1-3 , system board #2 is deleted fr om domain A and added to domain B. In this way , the physical configuration of the hardwar e (mounting locations) is not changed but the logical configuration is changed for management of th ...

  • Fujitsu Siemens Computers M5000 - page 31

    Chapter 1 Overview of Dynamic Reconfiguration 1-7 1.2.4 Replacing a System Boar d Y ou can use DR to remove a system board from a domain and either add it back later , or replace it with another system board, provided both boar ds satisfy DR requir ements as described in this document. Y ou can do so without stopping the Solaris OS running in eithe ...

  • Fujitsu Siemens Computers M5000 - page 32

    1-8 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 For details of XSCF shell commands provided for DR, see Section 3.1, “How T o Use the DR User Interface” on page 3-1 . XSCF W eb is beyond the scope of this document. See the SP ARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF User ’ s Guide for fu ...

  • Fujitsu Siemens Computers M5000 - page 33

    2-1 CHAPTER 2 What Y ou Must Know Befor e Using DR This chapter provides information you must know to successfully use the DR functions. 2.1 System Conf iguration This section describes the conditions, premises, and actions for operating the DR functions to construct a system. 2.1.1 System Boar d Components There ar e three types of system boar d c ...

  • Fujitsu Siemens Computers M5000 - page 34

    2-2 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 FIGURE 2-1 Example of Har dware Configuration (with Uni-XSB of Midrange Server) CMU IOU Memory Memory Memory Memory XSB 00-0 I/O device I/O device Memory Memory Memory Memory XSB 01-0 I/O device I/O device MBU ...

  • Fujitsu Siemens Computers M5000 - page 35

    Chapter 2 What Y ou Must Know Bef ore Using DR 2-3 FIGURE 2-2 Example of Har dware Configuration (with Quad-XSBs of Midrange Server) CMU IOU Memory XSB 00-2 Memory XSB 00-3 XSB 00-0 Memory I/O device XSB 00-1 Memory I/O device Memory XSB 01-2 Memory XSB 01-3 XSB 01-0 Memory I/O device XSB 01-1 Memory I/O device MBU ...

  • Fujitsu Siemens Computers M5000 - page 36

    2-4 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 FIGURE 2-3 Example of a Har dware Configuration (with Uni-XSBs of High-end Server) FIGURE 2-4 Example of a Har dware Configuration (with Quad-XSBs of High-end Server) 2.1.1.1 CPU Using DR to change a CPU configuration is easier than using it to change the c ...

  • Fujitsu Siemens Computers M5000 - page 37

    Chapter 2 What Y ou Must Know Bef ore Using DR 2-5 A CPU to be deleted must meet the following conditions: ■ No running process is bound to the CPU to be deleted. If a running process is bound to the target CPU, you must unbind or stop the pr ocess. ■ The CPU to be deleted does not belong to any processor set. If the target processor belongs to ...

  • Fujitsu Siemens Computers M5000 - page 38

    2-6 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 ■ T o control whether a system board contains kernel memory , use one or more of the following features, which ar e described below: kernel cage, floating boar ds, and kernel memory assginment. ■ T o copy kernel memory from one board to another , use th ...

  • Fujitsu Siemens Computers M5000 - page 39

    Chapter 2 What Y ou Must Know Bef ore Using DR 2-7 When the kernel cage is enabled, kernel memory is assigned to system boards in the order of their addr ess spaces. The kernel cage begins in the first addr ess space (which initially corresponds to the non-floating boar d with the lowest LSB number). If the kernel requir es more memory , then the k ...

  • Fujitsu Siemens Computers M5000 - page 40

    2-8 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 Once the copy-destination board has been selected, the Solaris OS performs a memory deletion on the selected user memory board. Then, the kernel memory on the system board to be deleted is copied into memory on the selected copy-destination system board. Th ...

  • Fujitsu Siemens Computers M5000 - page 41

    Chapter 2 What Y ou Must Know Bef ore Using DR 2-9 Deleting or moving a user memory board fails if either of the following statements is true: ■ The swap area does not have suf ficient fr ee space to save data from the user memory to be deleted. ■ There ar e too many locked or ISM pages to be covered by the memory on other system boards. 2.1.1. ...

  • Fujitsu Siemens Computers M5000 - page 42

    2-10 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 Note – Do not move a device that is part of a redundant configuration fr om one domain to another domain. The consequences of two domains simultaneously accessing the same device through differ ent paths could be disastrous, such as data corruption. 2.1. ...

  • Fujitsu Siemens Computers M5000 - page 43

    Chapter 2 What Y ou Must Know Bef ore Using DR 2-11 Moreover , a system board that is pooled can be assigned to a domain only when it is register ed on DCL. Pooled system boards must be pr operly managed. Y ou can add and delete system boards by combining the system board pooling function with the floating boar d, omit-memory , and omit-I/O options ...

  • Fujitsu Siemens Computers M5000 - page 44

    2-12 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 When kernel memory is copied, the Solaris OS is temporarily suspended. Therefor e, you must understand the effect of disconnecting the network connection with remote systems and other influences of the DR operation on job processes befor e determining syst ...

  • Fujitsu Siemens Computers M5000 - page 45

    Chapter 2 What Y ou Must Know Bef ore Using DR 2-13 operation. As a matter of course, system boards to be deleted, moved, or replaced have alr eady been register ed in the DCL. Y ou need not confirm that these boards have been register ed in the DCL. For details about the DCL and how to register system boards in the DCL and to confirm r egistration ...

  • Fujitsu Siemens Computers M5000 - page 46

    2-14 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 Note – Enable the configuration policy option when the power supply of the domain is turned off. 2.2.2.2 Floating Board Option The floating boar d option controls kernel memory allocation. Upon deletion of a system board on which kernel memory is loaded, ...

  • Fujitsu Siemens Computers M5000 - page 47

    Chapter 2 What Y ou Must Know Bef ore Using DR 2-15 2.2.2.3 Omit-memory Option When the omit-memory option is enabled, the memory on a system board cannot be used in the domain. Even when a system board actually has memory , this option enables you to make the memory on the system board unavailable through a DR operation to add or move the system b ...

  • Fujitsu Siemens Computers M5000 - page 48

    2-16 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 Note – Enable the omit-I/O option when the system board is in the system board pool or when the system board is not connected to the domain conf iguration. 2.3 Conditions and Settings Using Solaris OS This section describes the operating conditions and s ...

  • Fujitsu Siemens Computers M5000 - page 49

    Chapter 2 What Y ou Must Know Bef ore Using DR 2-17 If the kernel cage is disabled, the system may run more ef ficiently , but kernel memory will be spread among all boar ds and DR operations will not work on memory . T o determine whether kernel cage memory is enabled after the system has been rebooted, check the following message output fr om the ...

  • Fujitsu Siemens Computers M5000 - page 50

    2-18 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 XSCF manages the following aspects of domain status: T o perform a DR operation for a system board, you must determine the method of DR operation according to the status of the relevant domain. The conditions of domain status available for DR operation are ...

  • Fujitsu Siemens Computers M5000 - page 51

    Chapter 2 What Y ou Must Know Bef ore Using DR 2-19 The table below lists the status types available for individual management items. XSCF changes and configur es system board status accor ding to the conditions under which a system board is installed, removed, or r egistered in the DCL, or when a domain is started or stopped. System board status a ...

  • Fujitsu Siemens Computers M5000 - page 52

    2-20 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 T o perform a DR operation for a system board, you must determine the method of DR operation according to the status of the target system boar d. Y ou can display and reference the status of each system board via a user interface provided by XSCF . For det ...

  • Fujitsu Siemens Computers M5000 - page 53

    Chapter 2 What Y ou Must Know Bef ore Using DR 2-21 FIGURE 2-5 Flow of System Board Addition Pr ocessing 2.4.3.2 Flowchart: Deleting a System Board The flow of DR operations and the transition of system board status when a system board has been deleted or r eserved for deletion are described in the schematic flowchart, below . System board pool DCL ...

  • Fujitsu Siemens Computers M5000 - page 54

    2-22 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 Each system board status indicated in FIGURE 2-6 is the main status that is changed. FIGURE 2-6 Flow of System Board Deletion Pr ocessing Status of deletion from OS T est: passed Status of addition into OS T est: passed Request of Domain configuration T es ...

  • Fujitsu Siemens Computers M5000 - page 55

    Chapter 2 What Y ou Must Know Bef ore Using DR 2-23 2.4.3.3 Flowchart: Moving a System Board The flow of DR operations and the transition of system board status when a system board has been moved or r eserved for a move are described in the schematic flowchart, below . Each system board status indicated in FIGURE 2-7 is the main status that is chan ...

  • Fujitsu Siemens Computers M5000 - page 56

    2-24 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 FIGURE 2-7 Flow of System Board Move Pr ocessing Process to change domain Assignment: assigned Assignment:unav ailable Unassignment Deletion of system board Reser vation to delete system board Deletion Reboot of Mov e process Mov e reser vation process Con ...

  • Fujitsu Siemens Computers M5000 - page 57

    Chapter 2 What Y ou Must Know Bef ore Using DR 2-25 2.4.3.4 Flowchart: Replacing System Board The flow of DR operations and the transition of system board status when a system board has been r eplaced are described using the schematic flowchart. Each system board state indicated in FIGURE 2-8 is the main status that is changed. The sample status be ...

  • Fujitsu Siemens Computers M5000 - page 58

    2-26 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 FIGURE 2-8 Flow of System Board Replacement Processing Deletion process Deleting a system board DCL registration status Assignment: assigned System board pool Assignment: av ailable Deletion of system boards also Request to delete from Replacement Replacem ...

  • Fujitsu Siemens Computers M5000 - page 59

    Chapter 2 What Y ou Must Know Bef ore Using DR 2-27 2.5 Operation Management This section describes the premises and the actions for DR operations. 2.5.1 I/O Device Management Upon the addition of a system board, device information is reconf igured automatically . However , addition of the system board and the reconf iguration of device information ...

  • Fujitsu Siemens Computers M5000 - page 60

    2-28 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 memory contents. Be aware that some of the total swap space may be supplied by disks that are attached to the board to be deleted. When making your assessment, be certain to also account for the swap space that will be lost. ■ If the size of available me ...

  • Fujitsu Siemens Computers M5000 - page 61

    Chapter 2 What Y ou Must Know Bef ore Using DR 2-29 For example, when a kernel memory board with memory mirr or mode enabled is deleted or moved, kernel memory is moved from the kernel memory boar d to another system board. Kernel memory is moved normally even if memory mirror mode is disabled for the move-destination system board. However , this o ...

  • Fujitsu Siemens Computers M5000 - page 62

    2-30 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 2.5.8 Deletion of Boar d with DVD Drive T o delete the system board to which the server ’s DVD drive is connected, execute the following steps: 1. Stop the vold (1M) daemon by disabling the volfs service. 2. Execute the DR operation. 3. Restart the vold ...

  • Fujitsu Siemens Computers M5000 - page 63

    3-1 CHAPTER 3 DR User Interface This chapter describes the user interfaces for DR. 3.1 How T o Use the DR User Interface XSCF provides two user interfaces for DR: the command line interface by XSCF shell, and the browser -based user interface by XSCF W eb. This section describes the main XSCF shell commands used for DR. For other related commands, ...

  • Fujitsu Siemens Computers M5000 - page 64

    3-2 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 The sections below describe the DR display and DR operation commands in detail and show examples. For details of the options, operands, and usage of these commands, refer to SP ARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF Reference Manual . Note – ...

  • Fujitsu Siemens Computers M5000 - page 65

    Chapter 3 DR User Interface 3-3 T ABLE 3-3 Options of the showdcl Command Option Description -a Displays configuration information and status of all domains. -v Displays detailed domain configuration information. -h Displays usage information. -d domain_id Displays information about the specified domain, where domain_id is the domain number , possi ...

  • Fujitsu Siemens Computers M5000 - page 66

    3-4 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 The table below lists the items displayed by the showdcl (8) command. The following shows examples of displays by the showdcl (8) command. ■ Example 1: Display of information on domain #0 ■ Example 2: Display of detailed information on domain #0 Float S ...

  • Fujitsu Siemens Computers M5000 - page 67

    Chapter 3 DR User Interface 3-5 3.1.2 Displaying Domain Status The showdomainstatus (8) command lists the domains in the system and their status. This command displays the same domain status information as the showdcl (8) command. Use the showdomainstatus (8) command to check domain status before and after a DR operation. The following examples sho ...

  • Fujitsu Siemens Computers M5000 - page 68

    3-6 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 The following example shows a display of the showdomainstatus (8) command. ■ Example: Display of information on all domains 3.1.3 Displaying System Boar d Information The showboards (8) command displays system board information including the domain ID of ...

  • Fujitsu Siemens Computers M5000 - page 69

    Chapter 3 DR User Interface 3-7 The following examples show the format and options of the showboards (8) command. The table below lists the items displayed by the showboards (8) command. showboards [-v] -a [-c sp] showboards [-v] -d domain _id [-c sp] showboards [-v] xsb showboards -h T ABLE 3-7 Options of the showboards Command Option Description ...

  • Fujitsu Siemens Computers M5000 - page 70

    3-8 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 Assignment Status of assignment to domain configuration Unavailable The system board cannot be used. The system board may be unrecognizable because it is not mounted or it is faulty , the domain or system board may not have been conf igured, or the system b ...

  • Fujitsu Siemens Computers M5000 - page 71

    Chapter 3 DR User Interface 3-9 The following examples show displays of the showboards (8) command ■ Example 1 : Display of information on all system boards T est Diagnostic status of system board Unmount The system board is not mounted or cannot be recognized because it is faulty . Unknown The system board is not being diagnosed. T esting testin ...

  • Fujitsu Siemens Computers M5000 - page 72

    3-10 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 ■ Example 2 : Display of detailed information on all system boards ■ Example 3 : Display of information on the system board in the system board pool in domain #0 3.1.4 Displaying Device Information Use the showdevices (8) command to display device info ...

  • Fujitsu Siemens Computers M5000 - page 73

    Chapter 3 DR User Interface 3-11 Note – The showdevices (8) command only reports information about a r unning domain. T ABLE 3-9 Options of the showdevices Command Option Description -v Specifies that the command displays information about all devices. Information about not only the management target devices but also other devices is displayed. H ...

  • Fujitsu Siemens Computers M5000 - page 74

    3-12 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 The following example shows a display by the showdevices (8) command. T ABLE 3-10 Domain Information Displayed by the showdevices command Display items Description CPU CPU information. DID Domain ID. XSB System board number . id CPU ID. state CPU status. s ...

  • Fujitsu Siemens Computers M5000 - page 75

    Chapter 3 DR User Interface 3-13 ■ Example: Display of device information on XSB00-0 3.1.5 Displaying System Boar d Conf iguration Information Use the showfru (8) command to display system board conf iguration information. The showfru (8) command displays information about the PSB division type and memory mirroring mode settings in list format. T ...

  • Fujitsu Siemens Computers M5000 - page 76

    3-14 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 The table below lists the items displayed by the showfru (8) command. The following example shows a display of the showfru (8) command. ■ Example : Display of configuration information on all system boards T ABLE 3-11 Options of the showfru Command Optio ...

  • Fujitsu Siemens Computers M5000 - page 77

    Chapter 3 DR User Interface 3-15 3.1.6 Adding a System Boar d Use the addboard (8) command to add a system board to a domain or reserve the addition of a system board to a domain based on the DCL. The system boar d must already be r egistered in the tar get domain’s DCL. Use the showdcl (8) command to check whether a system board is r egistered i ...

  • Fujitsu Siemens Computers M5000 - page 78

    3-16 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 Note – (Note 1) In the system board addition pr ocessing executed by this command, a diagnosis of the system board to be added is performed first, and then the system board is added to the tar get domain. For this reason, much time may be r equired for t ...

  • Fujitsu Siemens Computers M5000 - page 79

    Chapter 3 DR User Interface 3-17 Note – (Note 3) If a system board has been forcibly added to a domain by the addboard (8) command with the -f option specified, normal operation of all added hardwar e resour ces may be disabled. For this reason, you should avoid using the -f option for normal DR operations. After adding a system board by using th ...

  • Fujitsu Siemens Computers M5000 - page 80

    3-18 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 T ABLE 3-14 Options of the deleteboard Command Option Description -q Specifies the suppr ession of output message display . The -y or -n option determines how output messages are automatically answered, whether or not the messages themselves are suppressed ...

  • Fujitsu Siemens Computers M5000 - page 81

    Chapter 3 DR User Interface 3-19 Note – (Note 1) The time requir ed for system board deletion pr ocessing depends on the amount of hardwar e resour ces mounted on the target system board. For this reason, much time may be r equired for the command to end its operation. If the system board contains kernel memory , the OS is suspended for a while. ...

  • Fujitsu Siemens Computers M5000 - page 82

    3-20 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 The following examples show the format and options of the moveboard (8) command. moveboard [[-q] -{y|n}][-f][-v][-c configure] -d domain_id xsb [ xsb ...] moveboard [[-q] -{y|n}][-f][-v] -c assign -d domain_id xsb [ xsb ...] moveboard [[-q] -{y|n}][-f][-v] ...

  • Fujitsu Siemens Computers M5000 - page 83

    Chapter 3 DR User Interface 3-21 Note – (Note 1) The time requir ed for system board deletion pr ocessing in the move-source domain depends on the amount of hardwar e resources mounted on the target system boar d. Moreover , in the system board addition pr ocessing in the move- destination domain, the system board to be added is first diagnosed, ...

  • Fujitsu Siemens Computers M5000 - page 84

    3-22 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 Note – (Note 2) If the DR processing executed by the moveboard (8) command fails, the target system boar d cannot be restored to the pr evious status. If DR processing fails, identify the cause of failure based on the error message output by the moveboar ...

  • Fujitsu Siemens Computers M5000 - page 85

    Chapter 3 DR User Interface 3-23 Note – (Note 1) Before r eplacing a system board, you must know the division type of the replacement-tar get PSB and the configurations and operation status of all domains to which all XSBs on the PSB belong. If the division type of the replacement-tar get PSB is Quad-XSB and the XSBs on the replacement-tar get PS ...

  • Fujitsu Siemens Computers M5000 - page 86

    3-24 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 3.1.10 Reserving a Domain Conf iguration Change Use the addboard (8), deleteboard (8), or moveboard (8) command to reserve a domain configuration change. A domain configuration change is r eserved when a system board cannot be added, deleted, or moved imme ...

  • Fujitsu Siemens Computers M5000 - page 87

    Chapter 3 DR User Interface 3-25 3.2 Command Refer ence This section lists the DR commands and other commands related to DR. For details of the commands, refer to SP ARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF Reference Manual . For the DR commands, see Section 3.1, “How T o Use the DR User Interface” on page 3-1 . Note – (Note 1) Use ...

  • Fujitsu Siemens Computers M5000 - page 88

    3-26 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 T ABLE 3-18 DR-related Commands Command name Function poweron T urns on the power of all domains or a specified domain. poweroff T urns off the power of all domains or a specif ied domain. setdscp Configur es DSCP network. showdscp Displays the DSCP networ ...

  • Fujitsu Siemens Computers M5000 - page 89

    Chapter 3 DR User Interface 3-27 3.3 XSCF W eb XSCF W eb lets you execute DR functions from a br owser . XSCF W eb is beyond the scope of this document. For details, refer to SP ARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF User ’ s Guide . 3.4 RCM Script Reconfiguration Coor dination Manager (RCM) is a framework used to manage the dynamic ...

  • Fujitsu Siemens Computers M5000 - page 90

    3-28 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 ...

  • Fujitsu Siemens Computers M5000 - page 91

    4-1 CHAPTER 4 Practical Examples of DR This chapter provides examples of DR operations, such as the addition, deletion, move, and replacement of system boards. Each example shows an operation procedur e using the command line interface of the XSCF shell. Similar procedures can also be applied to DR operations using the browser -based interface of t ...

  • Fujitsu Siemens Computers M5000 - page 92

    4-2 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 4.1.1 Flow: Adding a System Boar d FIGURE 4-1 Flow: Adding a System Board Checking the domain status DR The domain Normal Addition operation f or Addition processing of Hardware P ower-on or restar t Error Reser ve oper ation DR operation Stop status DR ope ...

  • Fujitsu Siemens Computers M5000 - page 93

    Chapter 4 Practical Examples of DR 4-3 4.1.2 Flow: Deleting a System Boar d FIGURE 4-2 Flow: Deleting a System Board Checking oper ation and Checking the domain status DR operation The domain is Checking the status of DR operation Deletion operation f or Deletion processing of Reser ve oper ation P ower-on or restar t DR operation DR operation DR S ...

  • Fujitsu Siemens Computers M5000 - page 94

    4-4 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 4.1.3 Flow: Moving a System Boar d FIGURE 4-3 Flow: Moving a System Board Checking oper ation and selecting Confirmation of the move-source Checking the status of the system Mov e operation for the Mov e processing of the system DR operation DR operation DR ...

  • Fujitsu Siemens Computers M5000 - page 95

    Chapter 4 Practical Examples of DR 4-5 4.1.4 Flow: Replacing a System Boar d FIGURE 4-4 Flow: Replacing a System Board Deletion reser vation operation f or the system board in its domain Checking oper ation and selecting a DR operation Deletion reser vation Deletion DR P ower-off of Hardware replacement Stop status Stop status P ooled There is a do ...

  • Fujitsu Siemens Computers M5000 - page 96

    4-6 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 4.2 Example: Adding a System Boar d This section provides an example of the DR operation to add a system board to a domain. In the example, a procedure conforming to section <LinkColor>4.1.1, "Flow: Adding a System Board." , is used, and the ...

  • Fujitsu Siemens Computers M5000 - page 97

    Chapter 4 Practical Examples of DR 4-7 If you need to change the PSB configuration, use the setupfru (8) command. If the system board to be added is not register ed in the DCL, register the system board in the DCL of the tar get domain by using the setdcl (8) command. 4. Add the new system board. Execute the addboard (8) command to add the system b ...

  • Fujitsu Siemens Computers M5000 - page 98

    4-8 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 4.3 Example: Deleting a System Boar d This section provides an example of operation to delete a system board from a domain. In the example, a procedure conforming to Section 4.1.2, “Flow: Deleting a System Board” on page 4-3 , is used, and the system bo ...

  • Fujitsu Siemens Computers M5000 - page 99

    Chapter 4 Practical Examples of DR 4-9 3. Check the status of the system board to be deleted. Execute the showboards (8) command to display system board information, and then check the status of the system board to be deleted. 4. Delete the system board. Execute the deleteboard (8) command to delete the system board and pool it in the system board ...

  • Fujitsu Siemens Computers M5000 - page 100

    4-10 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 4.4 Example: Moving a System Boar d This section provides an example of an operation to move a system board between domains. In the example, a procedure conforming to Section 4.1.3, “Flow: Moving a System Board” on page 4-4 , is used, and the system bo ...

  • Fujitsu Siemens Computers M5000 - page 101

    Chapter 4 Practical Examples of DR 4-11 3. Check the status of the move-destination domain. Execute the showdcl (8) command to display domain information, and then check the operation status of the move-destination domain. Based on the operation status of the move-source and move-destination domains, determine whether to perform the DR operation or ...

  • Fujitsu Siemens Computers M5000 - page 102

    4-12 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 7. Check the status of the move-destination domain and moved system board. Execute the showdcl (8) command to check the operation status of the move- destination domain, and then execute the showboards (8) command to check the status of the moved system bo ...

  • Fujitsu Siemens Computers M5000 - page 103

    Chapter 4 Practical Examples of DR 4-13 4.5.1 Example: Replacing a Uni-XSB System Boar d FIGURE 4-8 Example: Replacing a Uni-XSB System Board 1. Login to XSCF . 2. Check the status of the domain. Execute the showdcl (8) command to display domain information, and then check the operation status of the domain. Based on the operation status of the dom ...

  • Fujitsu Siemens Computers M5000 - page 104

    4-14 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 4. Delete the system board. Execute the deleteboard (8) command to delete the system board. 5. Check the status of the system board. Execute the showboards (8) command to display system board information, and then check the status of the system board. 6. P ...

  • Fujitsu Siemens Computers M5000 - page 105

    Chapter 4 Practical Examples of DR 4-15 8. Check the status of the domain. Execute the showdcl (8) command to display domain information, and then check the operation status of the domain. Based on the operation status of the domain, determine whether to perform the DR operation or reboot the domains. 9. Add the new system board to the domain. Exec ...

  • Fujitsu Siemens Computers M5000 - page 106

    4-16 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 4.5.2 Example: Replacing a Quad-XSB System Boar d FIGURE 4-9 Example: Replacing a Quad-XSB System Board 1. Login to XSCF . 2. Check the conf igurations and status of all domains to which the relevant system boards belong. Execute the showdcl (8) command to ...

  • Fujitsu Siemens Computers M5000 - page 107

    Chapter 4 Practical Examples of DR 4-17 3. Check the status of all related system boards. Execute the showboards (8) command to display system board information, and then check the status of all system boards related to the PSB to be r eplaced. The DR operation for replacement may not be possible if the board to be r eplaced does not support the DR ...

  • Fujitsu Siemens Computers M5000 - page 108

    4-18 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 6. Check the status of all related system boards. Execute the showboards (8) command to display system board information, and then check the status of all related system boards. 7. Physically replace the system board. Execute the replacefru (8) command, th ...

  • Fujitsu Siemens Computers M5000 - page 109

    Chapter 4 Practical Examples of DR 4-19 9. Check the status of all related domains. Execute the showdcl (8) command to display domain information, and then check the operation status of all related domains. Based on the operation status of the domain, determine whether to perform the DR operation or reboot the domains. 10. Add the new system board ...

  • Fujitsu Siemens Computers M5000 - page 110

    4-20 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 4.6 Examples: Reserving Domain Conf iguration Changes This section provides examples of operations to reserve a change in domain configuration by DR. In the examples, the XSCF shell is used to r eserve the addition, deletion, and movement of a system board ...

  • Fujitsu Siemens Computers M5000 - page 111

    Chapter 4 Practical Examples of DR 4-21 2. Check the status of the system board to be added. Execute the showboards (8) command to display system board information, and then check the status of the system board to be added and confirm its r egistration in the DCL. If you need to change the PSB configuration, use the setupfru (8) command. If the sys ...

  • Fujitsu Siemens Computers M5000 - page 112

    4-22 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 4.6.2 Example: Reserving a System Boar d Delete FIGURE 4-11 Example: Reserving a System Board Delete 1. Login to XSCF . 2. Check the status of the domain. Execute the showdcl (8) command to display domain information, and then check the operation status of ...

  • Fujitsu Siemens Computers M5000 - page 113

    Chapter 4 Practical Examples of DR 4-23 5. Check the reserved status of the system board. Execute the showboards (8) command with the -v option specified to display system board information, and then conf irm that deletion of the system board has been reserved. 6. Stop or reboot the domain. This operation changes the domain’s configuration, r ese ...

  • Fujitsu Siemens Computers M5000 - page 114

    4-24 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 3. Check the status of the move-destination domain. Execute the showdcl (8) command to display domain information, and then check the operation status of the move-destination domain. Based on the operation status of the move-source and move-destination dom ...

  • Fujitsu Siemens Computers M5000 - page 115

    Chapter 4 Practical Examples of DR 4-25 8. Check the status of the move-destination domain and moved system board. Execute the showdcl (8) command to check the operation status of the move- destination domain, and then execute the showboards (8) command to check the status of the system board and confirm that addition of the system boar d has been ...

  • Fujitsu Siemens Computers M5000 - page 116

    4-26 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 ...

  • Fujitsu Siemens Computers M5000 - page 117

    A-1 APPENDIX A Message Meaning and Handling This appendix explains the meaning and handling of DR-related messages. A.1 Solaris OS Messages This section explains the console messages printed by the DR driver . The output for messages that do not have an output field is console. A.1.1 T ransition Messages DR: PROM detach board X [Explanation] Detach ...

  • Fujitsu Siemens Computers M5000 - page 118

    A-2 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 OS unconfigure dr@0:SB X ::memory [Explanation] Unconfigure memory on system boar d X . OS unconfigure dr@0:SB X ::pci Y [Explanation] Unconfigure PCI Y on system boar d X . suspending <device name>@<device info> (aka <alias>) [Explanation ...

  • Fujitsu Siemens Computers M5000 - page 119

    Appendix A Message Meaning and Handling A-3 [Explanation] Suspending device drivers DR: in-kernel unprobe board <board> [Explanation] Unprobing the boar d. A.1.2 P ANIC Messages URGENT_ERROR_TRAP is detected during FMA. [Explanation] A fatal HW error was encountered during copy-r ename. [Remedy] Please contact customer service. Failed to remo ...

  • Fujitsu Siemens Computers M5000 - page 120

    A-4 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 [Explanation] Internal error during kernel migration [Remedy] Please contact customer service. CPU nn hang during Copy Rename [Explanation] A fatal HW error was encountered during copy-r ename. [Remedy] Please contact customer service. A.1.3 W arning Messag ...

  • Fujitsu Siemens Computers M5000 - page 121

    Appendix A Message Meaning and Handling A-5 [Remedy] Disable interrupt on cpu X with psradm -I and if this command fails again, respond in the manner dir ected by command message. dr_cancel_cpu: failed to online cpu X [Explanation] Failed to online CPU X . [Remedy] Repeat the action. If this error message appears again, please contact customer serv ...

  • Fujitsu Siemens Computers M5000 - page 122

    A-6 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 [Explanation] There may be inconsistency in the system. [Remedy] Please contact customer service. dr_status: failed to copyout status for board # [Explanation] There may be inconsistency in the system. [Remedy] Please contact customer service. dr_status: un ...

  • Fujitsu Siemens Computers M5000 - page 123

    Appendix A Message Meaning and Handling A-7 dr_pre_release_cpu: thread(s) bound to cpu X [Explanation] The thread in the pr ocess is bound to the detached CPU X . [Remedy] Check if the process bound to the CPU exists by pbind (1M) command. If it exists, unbind from the CPU and r epeat the action. dr_pre_release_mem: unexpected kphysm_del_release re ...

  • Fujitsu Siemens Computers M5000 - page 124

    A-8 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 [Remedy] Please repeat the action. If the problem r emains, please contact customer service. dr_release_mem_done: <device path>: error <error code> noted [Explanation] Error noted for a device during releasing memory . [Remedy] Please contact cu ...

  • Fujitsu Siemens Computers M5000 - page 125

    Appendix A Message Meaning and Handling A-9 Cannot stop user thread: <pid> <pid> ... [Explanation] The DR driver cannot stop all the user processes in the list. [Remedy] Please contact customer service. [Output] Console and Standard Output Cannot setup memory node [Explanation] DR is unable to read the HW information for the memory devi ...

  • Fujitsu Siemens Computers M5000 - page 126

    A-10 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 Invalid argument [Explanation] Invalid argument is passed to the driver or there may be inconsistency in the system. [Remedy] Repeat the action. If this error message appears again, please contact customer service. [Output] Console and Standard Output Inva ...

  • Fujitsu Siemens Computers M5000 - page 127

    Appendix A Message Meaning and Handling A-11 [Explanation] There may be inconsistency in the system. [Remedy] Please contact customer service. [Output] Console and Standard Output Cannot read property value: device node XXXXXX property: name [Explanation] Fail to get the property from OBP . [Remedy] Please contact customer service. [Output] Console ...

  • Fujitsu Siemens Computers M5000 - page 128

    A-12 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 [Explanation] DR fails to allocate enough memory to perform copy rename. [Remedy] Retry and if the problem persists, contact customer service. Failed to off-line: dr@0:SB X ::cpu Y [Explanation] Failed to off-line CPU Y on board X . [Remedy] Repeat the act ...

  • Fujitsu Siemens Computers M5000 - page 129

    Appendix A Message Meaning and Handling A-13 [Explanation] Detected lack of memory resource. [Remedy] Check the size of memory , detach the board and attach again. If the problem still exists, please contact customer service. [Output] Console and Standard Output Internal error: dr.c # [Explanation] There may be inconsistency in the system. [Remedy] ...

  • Fujitsu Siemens Computers M5000 - page 130

    A-14 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 Memory operation refused: dr@0:SBX::memory [Explanation] The DR operation is refused. [Remedy] Respond in the manner directed by the other message. Memory operation cancelled: dr@0:SBX::memory [Explanation] The DR operation is canceled. [Remedy] Respond in ...

  • Fujitsu Siemens Computers M5000 - page 131

    Appendix A Message Meaning and Handling A-15 [Remedy] Repeat the action. If this error message appears again, please contact customer service. [Output] Console and Standard Output Insufficient memory: dr@0:SB X ::cpu Y [Explanation] Lack of memory resources detected. [Remedy] Check the size of available memory and detach the board. If the problem s ...

  • Fujitsu Siemens Computers M5000 - page 132

    A-16 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 Operation already in progress: dr@0:SB X ::cpu Y [Explanation] The operation on cpu Y on system board X is in progr ess. [Remedy] Repeat the action. If the problem still exists, please contact customer service. [Output] Console and Standard Output dr_move_ ...

  • Fujitsu Siemens Computers M5000 - page 133

    Appendix A Message Meaning and Handling A-17 [Output] Console and Standard Output Cannot setup resource map opl-fcodemem [Explanation] Resource memory mapping cannot be set up. [Remedy] Please contact customer service. opl_cfg failed to load, error=<errno> [Explanation] opl_cfg module failed to load. [Remedy] Please contact customer service. ...

  • Fujitsu Siemens Computers M5000 - page 134

    A-18 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 [Explanation] A claim request with a nonzer o hint came from the fcode interpreter . [Remedy] If DR failed after this message, please contact customer service. opl_claim_memory - unable to allocate contiguous memory [Explanation] Memory allocation failed f ...

  • Fujitsu Siemens Computers M5000 - page 135

    Appendix A Message Meaning and Handling A-19 [Explanation] The node was not destroyed. [Remedy] Please contact customer service. IKP: destroy chip (<board>-<chip>) failed [Explanation] The node was not destroyed. [Remedy] Please contact customer service. dr_del_mlist_query: mlist=NULL [Explanation] The memory list to be deleted is NULL. ...

  • Fujitsu Siemens Computers M5000 - page 136

    A-20 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 [Remedy] Please contact customer service. I/O callback failed in post-attach [Explanation] I/O callback failed in post-attach [Remedy] Please contact customer service. Kernel Migration fails. 0x%x [Explanation] Internal error happened during kernel migrati ...

  • Fujitsu Siemens Computers M5000 - page 137

    Appendix A Message Meaning and Handling A-21 [Remedy] Please contact customer service. Failed to remove CMP xx on board n [Explanation] Internal error during DR operation. [Remedy] Please contact customer service. scf_fmem_cancel() failed rv=0x<error code> [Explanation] Internal error during kernel migration. [Remedy] Please contact customer ...

  • Fujitsu Siemens Computers M5000 - page 138

    A-22 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 [Explanation] An unknown resource type was found in the r esource list that is being freed while the board is unpr obed. [Remedy] Please contact customer service. VM viability test failed: dr@0:SBX::memory [Explanation] There is not enough r eal memory to ...

  • Fujitsu Siemens Computers M5000 - page 139

    Appendix A Message Meaning and Handling A-23 SCF error [Explanation] Internal error happened during kernel migration. [Remedy] Please contact customer service. A.2 Command Messages A.2.1 addboar d XSB#XX-X will be assigned to DomainID X. Continue? [y|n]: [Explanation] Confirming whether DR operation is going to be executed or not. Input "y&quo ...

  • Fujitsu Siemens Computers M5000 - page 140

    A-24 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 XSB#XX-X is currently unavailable for DR. Try again later. [Explanation] The specified system boar d (XSB#XX-X) has already been executed by another operation. [Remedy] DR or power-of f has been executing for another session. T ry again after waiting for a ...

  • Fujitsu Siemens Computers M5000 - page 141

    Appendix A Message Meaning and Handling A-25 [Remedy] Find out the cause of the DR failure r eferring monitoring message and errorlog. Conf irm the patch applying status and the XCP version DR failed. Domain (DomainID X) cannot communicate via DSCP path. [Explanation] DR processing cannot communicate with the domain. The reasons are that domain is ...

  • Fujitsu Siemens Computers M5000 - page 142

    A-26 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 An internal error has occurred. Please contact your system administrator. [Explanation] DR failed. There is a possibility that DR failed because of an internal error in XSCF . [Remedy] Find out the cause of the DR failure r eferring monitoring message and ...

  • Fujitsu Siemens Computers M5000 - page 143

    Appendix A Message Meaning and Handling A-27 [Explanation] The specified system boar d (XSB#XX-X) has already been executed by another operation. [Remedy] DR or power-of f has been executing for another session. T ry again after waiting for a while, with the confirmation of the XSB status. XSB#XX-X has not been registered to DCL. [Explanation] Syst ...

  • Fujitsu Siemens Computers M5000 - page 144

    A-28 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 Invalid parameter. [Explanation] There is an error in the specif ied argument or operand. [Remedy] Confirm the specif ied argument or operand and execute the command once again. Permission denied. [Explanation] Do not have privilege. [Remedy] Confirm the u ...

  • Fujitsu Siemens Computers M5000 - page 145

    Appendix A Message Meaning and Handling A-29 [Explanation] Confirming whether DR operation is going to be executed or not. Input "y" to execute it and "n" to stop it. DR operation canceled by operator. [Explanation] DR operation canceled by operator . Domain (DomainID X) is not currently running. [Explanation] Destination domain ...

  • Fujitsu Siemens Computers M5000 - page 146

    A-30 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 [Remedy] Power off the domain by specifying "-c reserve". XSB#XX-X detected timeout by DR self test. [Explanation] The timeout occurred during DR processing because the har dware diagnosis did not complete. There is something wrong with the har d ...

  • Fujitsu Siemens Computers M5000 - page 147

    Appendix A Message Meaning and Handling A-31 [Remedy] Find out the cause of the DR failure r eferring monitoring message and console message. T ry again after taking out cause. Invalid parameter. [Explanation] There is an error in the specif ied argument or operand. [Remedy] Confirm the specif ied argument or operand and execute the command once ag ...

  • Fujitsu Siemens Computers M5000 - page 148

    A-32 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 [Explanation] Confirming whether DR operation is going to be executed or not. Input "y" to execute it and "n" to stop it. XSB#XX-Xwill be configured into DomainID X. Continue? [y|n]: [Explanation] Confirming whether DR operation is goin ...

  • Fujitsu Siemens Computers M5000 - page 149

    Appendix A Message Meaning and Handling A-33 Invalid parameter. [Explanation] There is an error in the specif ied argument or operand. [Remedy] Confirm the specif ied argument or operand and execute the command once again. Permission denied. [Explanation] Do not have privilege. [Remedy] Confirm the user privilege and the command privilege. In the c ...

  • Fujitsu Siemens Computers M5000 - page 150

    A-34 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 The specified parameter is not supported in this model. [Explanation] Unsupported parameter in this server is specified. For this reason, the command was canceled. [Remedy] Confirm the specif ied parameter and the server model, and execute the command once ...

  • Fujitsu Siemens Computers M5000 - page 151

    Appendix A Message Meaning and Handling A-35 [Remedy] Confirm that the DSCP setting is corr ect, confirm that the dsc pr ocess is running fine on the domain. ...

  • Fujitsu Siemens Computers M5000 - page 152

    A-36 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 ...

  • Fujitsu Siemens Computers M5000 - page 153

    B-1 APPENDIX B Example: Conf irm Swap Space Size This example shows one way to analyze the physical memory on a system board to determine whether the system has enough swap space to support deletion of a board. It explains how to collect and analyze information using the showdevice (8) command on the XSCF and the swap (1M) command on the Solaris OS ...

  • Fujitsu Siemens Computers M5000 - page 154

    B-2 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 Notice in the Memory section that 2048 MB (2GB) of physical memory is on this board. And in the I/O Devices section the /dev/dsk/c0t3d0s1 disk contains a configur ed swap space. 2. On the domain execute the swap (1M) command with its -l option specif ied to ...

  • Fujitsu Siemens Computers M5000 - page 155

    Glossar y-1 Glossary This glossary describes some of the terms used in this manual. Capacity on Demand (COD) An option that provides additional CPU pr ocessing resour ces when needed. These additional CPUs are pr ovided on COD CPU boards that ar e installed in the system. T o access the COD CPUs, you must purchase the COD right-to use (R TU) licens ...

  • Fujitsu Siemens Computers M5000 - page 156

    Glossar y-2 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 eXtended System Control facility unit (XSCFU) The XSCF board for this server which contains system administration function and operates with independent processor . f ield-replaceable unit (FRU) A part that can be replaced by f ield engineers when s ...

  • Fujitsu Siemens Computers M5000 - page 157

    Glossar y-3 privileges Specific permissions granted to users. This system has platform administrator , platform operator , domain administrator , domain operator , domain manager , user administrator , audit administrator , audit operator and field engineer privileges during the XSCF program running. Quad-XSB One of the division types for a PSB to ...

  • Fujitsu Siemens Computers M5000 - page 158

    Glossar y-4 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007 ...

  • Fujitsu Siemens Computers M5000 - page 159

    Index-1 Index A Add, 1-3 addboard, 3-2, 3-15, 3-22 addfru, 3-26 addition, 1-6, 2-20, 2-27, 3-15, 4-2, 4-6 Assign, 1-3 B Basic DR T erms, 1-3 C Capacity on Demand, 2-29 configuration policy, 2-13 Configure, 1-3 Copy-rename, 2-7 CPU, 2-4 D DCL, 1-3, 2-10 degradation, 2-13 Delete, 1-3 deleteboard, 3-2, 3-17, 3-22 deletefru, 3-26 deletion, 1-6, 2-21, ...

  • Fujitsu Siemens Computers M5000 - page 160

    Index-2 SP ARC Enter prise Mx000 Ser vers Dynamic Reconfiguration User’ s Guide • September 2007 move, 1-6, 2-23, 3-19, 4-4, 4-10 moveboard, 3-2, 3-19 O omit-I/O, 2-15 omit-memory, 2-15 P Physical System Board, 1-4 powerof f, 3-26 poweron, 3-26 PSB, 1-4 Q Quad-XSB, 1-5, 2-1, 2-10, 4-16 R RCM Script, 3-27 real-time pr ocesses, 2-28 Register, 1- ...

  • Fujitsu Siemens Computers M5000 - page 161

    ...

  • Fujitsu Siemens Computers M5000 - page 162

    Herausgegeben von / Published by Fujitsu Siemens Computers Gmb H *U416 84-J-Z81 6-2-76 * U41684- J-Z816-2 -76 Bes tell- Nr ./ Order No .: U41684-J- Z816-2-7 6 ...

Manufacturer Fujitsu Siemens Computers Category Server

Documents that we receive from a manufacturer of a Fujitsu Siemens Computers M5000 can be divided into several groups. They are, among others:
- Fujitsu Siemens Computers technical drawings
- M5000 manuals
- Fujitsu Siemens Computers product data sheets
- information booklets
- or energy labels Fujitsu Siemens Computers M5000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Fujitsu Siemens Computers M5000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Fujitsu Siemens Computers M5000, service manual, brief instructions and user manuals Fujitsu Siemens Computers M5000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Fujitsu Siemens Computers M5000.

A complete manual for the device Fujitsu Siemens Computers M5000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Fujitsu Siemens Computers M5000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Fujitsu Siemens Computers M5000.

A complete Fujitsu Siemens Computers manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Fujitsu Siemens Computers M5000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Fujitsu Siemens Computers M5000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Fujitsu Siemens Computers M5000, that we can find in the current document
3. Tips how to use the basic functions of the device Fujitsu Siemens Computers M5000 - which should help us in our first steps of using Fujitsu Siemens Computers M5000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Fujitsu Siemens Computers M5000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Fujitsu Siemens Computers M5000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Fujitsu Siemens Computers M5000?

Use the form below

If you did not solve your problem by using a manual Fujitsu Siemens Computers M5000, ask a question using the form below. If a user had a similar problem with Fujitsu Siemens Computers M5000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)