Manual Vivitek D5110W-WNL

94 pages Not applicable
Download

Go to site of 94

Summary
  • Vivitek D5110W-WNL - page 1

    ...

  • Vivitek D5110W-WNL - page 2

    Copyright This publication, includin g all photographs, illustrati ons and softwa re, is protected under international copyright laws, with all rig hts reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. © Copyright 2013 Disclaimer The information in this docu ment is su ...

  • Vivitek D5110W-WNL - page 3

    DLP Projector—User’s Manual — ii — Important Safety Information Important: It is strongly recommended that you read this sect ion carefully be fore using the projector. These safety and usage instructions will ensure that you enj oy many years of safe use of the pr ojector. Keep this manual for future reference. Symbols Used Warning symbols ...

  • Vivitek D5110W-WNL - page 4

    P P P r r r e e e f f f a a a c c c e e e Projector Installation Notice ¾ Place the projector in a horizontal p osition The tilt angle of the projector please see Tilt Up/Down caution on page 52 . ¾ Allow at least 50 cm clearance around th e exhaust vent. ¾ Ensure that the intake vents do not recy cle hot air from the exhaust vent. ¾ When opera ...

  • Vivitek D5110W-WNL - page 5

    DLP Projector—User’s Manual — iv — Verify Installation Location ¾ To supply power, the 3-blade (with earth ing lead) socket should be used to en sure proper grounding and equalize d ground potential for all of the equipment in the Projector System. ¾ The power code provided with the Proje ctor should be used. In case of any missing item, ...

  • Vivitek D5110W-WNL - page 6

    P P P r r r e e e f f f a a a c c c e e e Power Safety ¾ Only use the supplied power cord. ¾ Do not place anything on the powe r cord. Place the power cord where it will not be in the way of foot traffic. ¾ Remove the batteries from the remote control whe n storing or not in use for a prolonged period. Replacing the Lamp Replacing the lamp can b ...

  • Vivitek D5110W-WNL - page 7

    DLP Projector—User’s Manual — vi — Main Features • Lightweight unit, easy to p ack away and transport. • Compatible with all m ajor video standards includ ing NTSC, P AL, and SECAM. • A high brightness rating allows for presentations in daylight or in lit rooms. • Supports resolutions up to WUXGA at 16.7 million colors to deliver cr ...

  • Vivitek D5110W-WNL - page 8

    P P P r r r e e e f f f a a a c c c e e e – vii – Table of Contents GETTING STARTED ........................................................................................................................................................... 1 P ACKING C HECKLIST .................................................................................... ...

  • Vivitek D5110W-WNL - page 9

    DLP Projector—User’s Manual — viii — TROUBLESHOOTING ...................................................................................................................................................... 62 C OMMON PROBLEMS AN D SOLUTIONS ....................................................................................................... ...

  • Vivitek D5110W-WNL - page 10

    DLP Projector – User’s Manual — 1 — G ETTING S TARTED Packing Checklist Carefully unpack the projector and che ck that the following items are included: P ROJECTOR W ITH L ENS C AP R EMOTE CONTROL (W ITH T WO AA B ATTERIES ) P OWER CORD VGA CABLE (1.8 M ) T ILT L AMP MODULE (O PTIONAL ) CD-ROM (T HIS U SER ’ S MANUAL ) W ARRANTY C ARD Q U ...

  • Vivitek D5110W-WNL - page 11

    DLP Projector—User’s Manual Views of Projector Parts Front-right View 2 3 4 5 6 7 8 1 0 11 1 9 I TEM L ABEL D ESCRIPTION S EE PAGE : 1. Screw For ensure the lens positio n 2. Vertical lens shift Adjusts the image position vertically 18 3. Lens release button Press the release button before removing the lens 11 4. Horizontal lens shift Adjusts t ...

  • Vivitek D5110W-WNL - page 12

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Top view—On-screen Displa y (OSD) buttons and LEDs I TEM L ABEL D ESCRIPTION S EE PAGE : 1. MENU Opens and exits OSD me nus 2. Navigates and changes settings in the OSD Quick Menu – Fo ...

  • Vivitek D5110W-WNL - page 13

    DLP Projector—User’s Manual Rear view 12 3 4 56 7 8 9 10 1 1 12 13 14 15 16 1 7 18 19 20 21 22 2 3 24 2 5 26 27 28 29 30 31 I TEM L ABEL D ESCRIPTION S EE PAGE : 1. VGA1 Connect a RGB cable from a computer or a video en abled device. 2. AUDIO IN 1 Connect the AUDIO cable from an input device. 3. VGA2 Connect a RGB cable from a computer or a vid ...

  • Vivitek D5110W-WNL - page 14

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l – 5 – I TEM L ABEL D ESCRIPTION S EE PAGE : 15. VGA OUT Connect the RGB cable to a display. (Pass through by VGA1 only) 16. AUDIO OUT Connect an AUDIO cable for au dio loop through. 17 ...

  • Vivitek D5110W-WNL - page 15

    DLP Projector—User’s Manual Bottom view I TEM L ABEL D ESCRIPTION S EE PAGE : 1. Tilt adjustor Rotate adjuster lever to adjust angl e position. 17 2. Ceiling support holes Contact your dealer for information on m ounting the projector on a ceiling Note: When installing, ensure that you us e only UL Listed ceiling mounts. For ceiling installatio ...

  • Vivitek D5110W-WNL - page 16

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Remote Control Par ts Important: 1. Avoid using the projector with bright fluore scent lighting turned on. Certain high-frequency fluorescent lights can disrupt remote control operation. 2 ...

  • Vivitek D5110W-WNL - page 17

    DLP Projector—User’s Manual — 8 — I TEM L ABEL D ESCRIP TION S EE PAGE : 1. Power OFF Turns the projector off 13 2. DVI Displays the DVI source selection 3. VGA Displays the VGA source selection 4. DP Displays the DisplayPort source selection 5. Up cursor / Keystone+ Navigates and changes settings in the OSD Quick Menu – For Keystone 6. E ...

  • Vivitek D5110W-WNL - page 18

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l – 9 – Remote Control Operating Range The remote control uses infrared transmission to c ontrol the projector. It is not necessary to point the remote directly at the projector. Provide ...

  • Vivitek D5110W-WNL - page 19

    DLP Projector—User’s Manual — 10 — S ETUP AND O PERATION Inserting the Remote Control Batteries 1. Remove the battery compartment cover by sliding the cover in the direction of the arrow. 2. Insert the battery with the positive side facing up. 3. Replace the cover. Caution: 1. Only use AA batteries (Alkali ne batteries are recommended). 2. ...

  • Vivitek D5110W-WNL - page 20

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Installing or Removing the Optional Lens Caution: y Do not shake or place excessive pressure on the projector or the lens components as the projector and lens component s contain precision ...

  • Vivitek D5110W-WNL - page 21

    DLP Projector—User’s Manual Installing the New Lens 1. Align the notches and correctly position the electrical co ntact pad as shown in the picture. Note: Pin of Electrical contact pins should be in the direction as shown in the picture. 2. Rotate the lens clockwise until you feel it click into place. El ectr i ca l contact p i ns — 12 — ...

  • Vivitek D5110W-WNL - page 22

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Starting and Shutting down t he Projec tor 1. Remove the lens cap. 2. Securely connect the power cord and signal cable. When connected, the power led will turn red. 3. Turn on the lamp by ...

  • Vivitek D5110W-WNL - page 23

    DLP Projector—User’s Manual 4. If more than one input device is connected, press the SOURCE button and use ▲▼ to scroll among devices. • DVI: Digital Visual Interface • HDMI: High-Definition Multimedia Interface compatible • DisplayPort: Digital display interface • VGA 1 / 2: Analog RGB 1 / 2 • BNC: Analog RGB (BNC connector) • ...

  • Vivitek D5110W-WNL - page 24

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Setting an Access Password (Security L ock) You can use the four (arrow) buttons to se t a password and prevent unauthorized use of the projector. When enabled, the password must be entere ...

  • Vivitek D5110W-WNL - page 25

    DLP Projector—User’s Manual 5. You can use the cursor buttons ▲▼◄► either on keypad or IR remote control for password entry. You can use any combination including the same arrow five times, but not less than five. Press the cursor buttons in any order to set the password. Push the MENU button to exit the dialog box. 6. The password conf ...

  • Vivitek D5110W-WNL - page 26

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Adjusting the Projector Level Take note of the following when setting up the projector: • The projector t able or stand should be level and sturdy . • Position the projector so that it ...

  • Vivitek D5110W-WNL - page 27

    DLP Projector—User’s Manual Adjusting Projected Imag e Position Using Shift Note: Suggest to loosen the screw before lens shift adjustment and tighten up after finished adjustment. The Shift feature provides a lens shift functi on that can be used to adj ust the position of th e projected image either horiz ontally or vertically within the rang ...

  • Vivitek D5110W-WNL - page 28

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l XGA Screen Distance (L) 100% Screen H eight (H) -20% +100% X GA 100% x (H/2 ) 1080P S creen Distance (L) (H/2) x 20% 100% Screen Height (H) +120% -40% 0% 1 080 P 40% x (H/2) 120% x (H/2 ) ...

  • Vivitek D5110W-WNL - page 29

    DLP Projector—User’s Manual Adjusting the horizontal image position With the lens in the center posit ion the horizontal image pos ition can be adjusted to the left or right by up to a maximum of 10% of the half image wi dth. Note that the maximum horizontal image height adjustment can be limited by the vertical image position. For example it i ...

  • Vivitek D5110W-WNL - page 30

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l XGA The max H up shift = H/2 x 100% The max H down shift = H/2 x 20% The max W shift = W/2 x 10% When max W shift is W/2 x 10% max H shift = H/2 x 90% When max H shift is H/2 x 100% max W ...

  • Vivitek D5110W-WNL - page 31

    DLP Projector—User’s Manual Adjusting the Zoom, Focus and Keystone 1. Use the Image-zoom control (on the projector only) to resize the projected image and screen size. 2. Use the Image-focus control (on the projector only) to sharpen the projected image. 3. Use the KEYSTONE buttons (on the projector or the remote control) to correct image-trape ...

  • Vivitek D5110W-WNL - page 32

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Adjusting the Volume 1. Press the Volume +/- buttons on the remote control. The volume control appears on the display. 2. Press the Left or Right Cursor buttons on the keypad to adjust Vol ...

  • Vivitek D5110W-WNL - page 33

    DLP Projector—User’s Manual — 24 — O N -S CREEN D ISPLAY (OSD) M ENU S ETTINGS OSD Menu Controls The projector has an OSD that lets you ma ke image adjustments and c hange various settings. Navigating the OSD You can use the remote control cursor buttons or the buttons on the top of the projector to navigate and make changes to the OSD. The ...

  • Vivitek D5110W-WNL - page 34

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Setting the OSD Language Set the OSD language to your pr eference before continuing. 1. Press the MENU button. Press the cursor ◄► button to navigate to Settings 1 . Press the cursor ? ...

  • Vivitek D5110W-WNL - page 35

    DLP Projector—User’s Manual OSD Menu Overview Use the following illustration to quickly find a se tting or determine the range for a setting. — 26 — ...

  • Vivitek D5110W-WNL - page 36

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Image Menu Attention ! All of display mode parameters when changed will be saved to user mode. Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Ima ...

  • Vivitek D5110W-WNL - page 37

    DLP Projector—User’s Manual Computer Menu Press the MENU button to open the OSD menu. Press ◄► to move to the Image menu. Press ▲▼ to move to the Computer menu and then press Enter or ► . Press ▲▼ to move up and down in the Computer menu. I TEM D ESCRIPTION Horizontal Position Press the cursor ◄► button to enter and adjust the ...

  • Vivitek D5110W-WNL - page 38

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Advanced menu and then press Enter or ► . Press ▼▲ to ...

  • Vivitek D5110W-WNL - page 39

    DLP Projector—User’s Manual Color Manager Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Color Manager menu and then press Enter or ► . Press ▼▲ to move up and down in the Color Manager menu. I TEM D ESCRIPTION Red Select to enter the Red Color Manager. Press the ◄► butt ...

  • Vivitek D5110W-WNL - page 40

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Settings 1 Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Settings 1 menu. Press the cursor ▲▼ button to move up and down in the Setting ...

  • Vivitek D5110W-WNL - page 41

    DLP Projector—User’s Manual Audio Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▼▲ to move to the Audio me nu and then press Enter or ► . Press ▼▲ to move up and down in the Audio menu. I TEM D ESCRIPTION Volume Press the cursor ◄► button to enter and adju st the audio volume. Mute ...

  • Vivitek D5110W-WNL - page 42

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Advanced 1 Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▲▼ to move to the Advanced 1 menu and then press Enter or ► . Press ...

  • Vivitek D5110W-WNL - page 43

    DLP Projector—User’s Manual 3D Setting I TEM D ESCRIPTION 3D Press the cursor ◄► button to enter and select different 3D mod e. 3D Sync Invert Press the cursor ◄► button to enter and enable or disable 3D Sync Invert. 3D Format Press the cursor ◄► button to enter and enable or disable different 3D Format. Note: 1. The 3D OSD menu ite ...

  • Vivitek D5110W-WNL - page 44

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Advanced 2 Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▲▼ to move to the Advanced 2 menu and then press Enter or ► . Press ...

  • Vivitek D5110W-WNL - page 45

    DLP Projector—User’s Manual Settings 2 Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Settings 2 menu. Press the cursor ▲▼ button to move up and down in the Settings 2 menu. I TEM D ESCRIPTION Auto Source Press the cursor ◄► button to enter and enable or disable auto matic source detection ...

  • Vivitek D5110W-WNL - page 46

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Status Press the cursor ▲▼ button to move up and down in the Settings 2 menu. Select the Status menu and press Enter or ► to enter. I TEM D ESCRIPTION Active Source Display the activ ...

  • Vivitek D5110W-WNL - page 47

    DLP Projector—User’s Manual Advanced 1 Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press ▲▼ to move to the Advanced 1 menu and then press Enter or ► . Press ▲▼ to move up and down in the Advanced 1 menu. Press ◄► to enter and change values for setting. I TEM D ESCRIP TION Menu P ...

  • Vivitek D5110W-WNL - page 48

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Lamp Hour Reset Please refer to Resetting the Lamp on page 57 to reset the lamp hour counter. Network I TEM D ESCRIPTION Network State Displays the network connection status. DHCP Press th ...

  • Vivitek D5110W-WNL - page 49

    DLP Projector—User’s Manual LAN_RJ45 Wired LAN Terminal functionalites Remote control and monitoring of a proje ctor from a PC (or Laptop) via wired LAN is also po ssible. Compatibility with Crestron / AM X (Device Discovery) / Extron control boxes enables not only collective projector mana gement on a network but also management from a control ...

  • Vivitek D5110W-WNL - page 50

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l LAN_RJ45 1. Connect an RJ45 cable to RJ45 ports on the projecto r and the PC (Laptop). 2. On the PC (Laptop), sele ct Start → Control Panel → Net work Connections . – 41 – ...

  • Vivitek D5110W-WNL - page 51

    DLP Projector—User’s Manual 3. Right-click on Local Area Connection , and select Properties . 4. In the Properties window, select the General tab, an d select Internet Protocol (TCP/IP) . 5. Click Properties . 6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK . — 42 — ...

  • Vivitek D5110W-WNL - page 52

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l 7. Press the Menu button on the projector. 8. Select Settings2 → Advanced1 → Network 9. After getting into Net work , input the following: ` DHCP: Off ` IP Address: 10.10.10.10 ` Subne ...

  • Vivitek D5110W-WNL - page 53

    DLP Projector—User’s Manual C ATEGORY I TEM I NPUT -L ENGTH IP Address 15 IP ID 3 Crestron Control Port 5 Projector Name 10 Location 10 Projector Assigned To 10 DHCP (Enabled) (N/A) IP Address 15 Subnet Mask 15 Default Gateway 15 Network Configuration DNS Server 15 Enabled (N/A) New Password 10 User Password Confirm 10 Enabled (N/A) New Passwor ...

  • Vivitek D5110W-WNL - page 54

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Preparing Email Alerts 1. Make sure th at user can access the hom epage of LAN RJ45 function by web browser (for ex- ample, Microsoft Internet Explorer v6.01/v8.0). 2. From the Homepage of ...

  • Vivitek D5110W-WNL - page 55

    DLP Projector—User’s Manual 4. For Sending alert mail, input the following:  The   SMTP field is the mail server for sending out em ail (SMTP protocol). This is a required field.  The   To field is the recip ient’s email address (for ex ample, the projector ad ministrator). This is a required field.  The   Cc field sends a carb ...

  • Vivitek D5110W-WNL - page 56

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l RS232 by Telnet Function Besides projector connected to RS232 interface with “Hyper-Terminal” communication by dedicated RS232 command control, there is alte rnative RS232 command cont ...

  • Vivitek D5110W-WNL - page 57

    DLP Projector—User’s Manual Input the command format like the below: telnet ttt.xxx.yyy.zzz 23 (“Enter” key pressed) ( ttt.xxx.yyy.zzz : IP-Address of the projector) If Telnet-Connection ready, and user can have RS232 command input, then “Enter” key pressed, the RS232 co mmand will be workable. How to have TELNET enabled in Windows VIST ...

  • Vivitek D5110W-WNL - page 58

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Select “Turn Windows features on or off” to open Have “Telnet Client” option che cked, then press “OK” button. Specsheet for “RS232 by TELNET” : 1. Telnet: TCP 2. Telnet po ...

  • Vivitek D5110W-WNL - page 59

    DLP Projector—User’s Manual Advanced 2 Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press ▲▼ to move to the Advanced 2 menu and then press Enter or ► . Press ▲▼ to move up and down in the Advanced 2 menu. Press ◄► to enter and change values for setting. I TEM D ESCRIPTION Sleep T ...

  • Vivitek D5110W-WNL - page 60

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Source Filter Press the ENTER button to enter the Source Filter sub menu. I TEM D ESCRIPTION DVI Press the ◄► buttons to enter and enable or disable the DVI source. HDMI Press the ◄? ...

  • Vivitek D5110W-WNL - page 61

    DLP Projector—User’s Manual — 52 — M AINTENANCE AND S ECURITY Tilt Up/Down caution ¾ When projector detect angle is over spec, popup caution message. The model with Standard lamp module The model with Standard lamp mod ule can be used projectio n angle as shown belo w. If Projector projection angl e exceeds the drawing show n and d on’t ...

  • Vivitek D5110W-WNL - page 62

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Standard lamp module Tilt lamp module ( Optional ) Note: The standard lamp is to go with regular shipm ent for normal operation and the tilt lamp is an option lamp for abnormal operation ? ...

  • Vivitek D5110W-WNL - page 63

    DLP Projector—User’s Manual Replacing the Projection Lamp The projection lamp should be replaced when it burns out. It should only be replaced with a certified replacement part, which you can order from your local dealer. Important: a. The projection lamp used in this produc t contains a small amount of mercury. b. Do not dispose this product w ...

  • Vivitek D5110W-WNL - page 64

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l 4. Unlock the lamp cover. 5. Pull up and remove the cover. 6. Use a screwdriver to remove the screws from the lamp module. 7. Pull out the lamp module. – 55 – ...

  • Vivitek D5110W-WNL - page 65

    DLP Projector—User’s Manual 8. Reverse steps 1 to 7 to install the new lamp module. While installing, align the lamp module with the connector and ensure it is level to avoid damage. Note: The lamp module must sit securely in place and the lamp connector must be connected properly before tightening the screws. — 56 — ...

  • Vivitek D5110W-WNL - page 66

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Resetting the Lamp After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following: 1. Press the MENU button to open the OSD menu. 2. Press the cursor ◄? ...

  • Vivitek D5110W-WNL - page 67

    DLP Projector—User’s Manual Cleaning the filter (filter: optional parts) The air filter prevents dust from accumulating on the surface of the optical elements inside the projector. If the filter is dirty or clogged, your projector may overheat or degrading the projected image quality. 1. Turn off the projector, and unplug the AC power cord from ...

  • Vivitek D5110W-WNL - page 68

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Replacing the Filter 1. Turn off the projector, and unplug the AC power cord from the AC outlet. Clean up the dust on the projector and around the air vents. Pull out the filter cover and ...

  • Vivitek D5110W-WNL - page 69

    DLP Projector—User’s Manual — 60 — Cleaning the Projector Cleaning the projector to remove dust and gr ime will help ensure trouble-free operation. Warning: 1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so could result in a severe burn. 2. Use only a dampened cloth when cleaning. Do not a ...

  • Vivitek D5110W-WNL - page 70

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Using the Physical Lock Using the Kensington ® Lock If you are concerned about security, attach t he projector to a permanent object with the Kensington slot and a security cable. Note: C ...

  • Vivitek D5110W-WNL - page 71

    DLP Projector—User’s Manual — 62 — T ROUBLESHOOTING Common problems and solut ions These guidelines provide tips to deal with problem s you may encounter while using the projector. If the problem remains unsolved, c ontact your dealer for assistance. Often after time spent troubleshooting, the problem is traced to so mething as simple as a ...

  • Vivitek D5110W-WNL - page 72

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l – 63 – LED Error Messages P OWER L ED T EMP L ED R EADY L ED E RROR C ODE M ESSAGE S R ED B LUE R ED R ED System Initial Flash - OFF OFF Ready to Power on (Standby) ON - OFF OFF Sy ...

  • Vivitek D5110W-WNL - page 73

    DLP Projector—User’s Manual — 64 — Problem: The image is wider at the top or bottom (trapezoid effect) 1. Position the projector so it is as p erpendicular to the screen as possible. 2. Use the Key stone button on the remote control to correct the proble m. Problem: The image is reversed Check the Projection setting on the Settings 1 menu o ...

  • Vivitek D5110W-WNL - page 74

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l – 65 – Audio Problems Problem: There is no sound 1. Adjust the volume on the remote control. 2. Adjust the volume of the audio so urce. 3. Check the au dio cable connection. 4. Test th ...

  • Vivitek D5110W-WNL - page 75

    DLP Projector—User’s Manual — 66 — HDMI Q & A Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI cable? Recently, HDMI Licensing, LLC announ ced that cables would be tested as Standard or Hig h- Speed cables. ˙ Standard (or “category 1”) HDMI ca bles have been tested to perform at speed s of 7 ...

  • Vivitek D5110W-WNL - page 76

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l – 67 – S PECIFICATIONS Specifications Model D5010/D501ZAA/D501ZWAA D 5110W D5380U Display type 0.7" XGA DC3 0.65" WXGA DC2 0.67" WUXGA DC3 TypeA Resolution 1024x768 1280 ...

  • Vivitek D5110W-WNL - page 77

    DLP Projector—User’s Manual — 68 — Specifications Model D5005 D5290U D5190HD Display ty pe 0.7" XGA DC3 0.67" WUXGA DC3 TypeA 0.65” 1080P DC2 TypeA Resolution 1024x768 1920x1200 1920x1080 Projection distance 1.5 meters ~ 7 meters Projection screen size 37.3” ~ 215” 36” ~ 210” 35.1” ~ 205” Projection lens Manual Focus ...

  • Vivitek D5110W-WNL - page 78

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Projection Distance vs. Projection Si ze (WUXGA)  V-S y nc Projection Distance H H O Image Hight A Projection Distance and Size Table Standard projection lens: TR: 1.54 ~ 1.93; offset=1 ...

  • Vivitek D5110W-WNL - page 79

    DLP Projector—User’s Manual — 70 — Short throw projection lesn: TR: 0.77; offset=110% F IX Distance (m) 0.66 1.33 1.66 2.49 Diagonal (") 40 80 100 150 Image Width (mm) 862 1723 2154 3231 Image Height (mm) 538 1077 1346 2019 H (mm) 269 538 673 1010 O (mm) 296 592 740 1111 A (mm) 27 54 67 101 offset % = O/H × 100% O=A+H H=(1/2) × (imag ...

  • Vivitek D5110W-WNL - page 80

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Projection Distance vs. Projection Si ze (WXGA)  V-S y nc Projection Distance H H O Image Hight A Projection Distance and Size Table Standard projection lens: TR: 1.62 ~ 2.03; offset=11 ...

  • Vivitek D5110W-WNL - page 81

    DLP Projector—User’s Manual — 72 — Short throw projection lens: TR: 0.81; offset=110% F IX Distance (m) 0.7 1.4 1.74 2.62 Diagonal (") 40 80 100 150 Image Width (mm) 862 1723 2154 3231 Image Height (mm) 538 1077 1346 2019 H (mm) 269 538 673 1010 O (mm) 296 592 740 1111 A (mm) 27 54 67 101 offset % = O/H × 100% O=A+H H=(1/2) × (image ...

  • Vivitek D5110W-WNL - page 82

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Projection Distance vs. Projection Si ze (XGA)  V-S y nc Projection Distance H H O Image Hight A Projection Distance and Size Table Standard projection lens: TR: 1.6 ~ 2; offset=100% T ...

  • Vivitek D5110W-WNL - page 83

    DLP Projector—User’s Manual — 74 — Short throw projection lens: TR: 0.8; offset=100% F IX Distance (m) 0.65 1.3 1.63 2.44 Diagonal (") 40 80 100 150 Image Width (mm) 813 1626 2032 3048 Image Height (mm) 610 1219 1524 2286 H (mm) 305 610 762 1143 O (mm) 305 610 762 1143 A (mm) 0 0 0 0 offset % = O/H × 100% O=A+H H=(1/2) × (image heigh ...

  • Vivitek D5110W-WNL - page 84

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Projection Distance vs. Projection Si ze (1080P)  V-S y nc Projection Distance H H O Image Hight A Projection Distance and Size Table Standard projection lens: TR: 1.54 ~ 1.93; offset=1 ...

  • Vivitek D5110W-WNL - page 85

    DLP Projector—User’s Manual — 76 — Short throw projection lens: TR: 0.77; offset=120% T ELE Distance (m) 0.68 1.36 1.70 2.56 Diagonal (") 40 80 100 150 Image Width (mm) 886 1771 2214 3321 Image Height (mm) 498 996 1245 1868 H (mm) 249 498 623 934 O (mm) 299 598 747 1121 A (mm) 50 100 125 187 offset % = O/H × 100% O=A+H H=(1/2) × (ima ...

  • Vivitek D5110W-WNL - page 86

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l – 77 – Timing Mode Table Signal Resolution H-Sync (KHz) V-Sync (Hz) Composite S-Video Component RGB (Analog) DP/DVI HDMI (Digital) NTSC - 15.7 60.0 ○ - - - PAL/SECAM - 15.6 ...

  • Vivitek D5110W-WNL - page 87

    DLP Projector—User’s Manual — 78 — Signal Resolution H-Sync (KHz) V-Sync (Hz) Composite S-Video Component RGB (Analog) DP/DVI HDMI (Digital) 1680 x 1050 64.7 59.9 - - ○ ○ 1680 x 1050 65.3 60.0 - - ○ ○ 1920 x 1200 74.0 60.0 - - ○ ○ 1920 x 1080 67.5 60.0 - - ○ ○ 640 x 480 35.0 66.7 - - ○ ○ 832 x 624 49. ...

  • Vivitek D5110W-WNL - page 88

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l Projector Dimensions – 79 – ...

  • Vivitek D5110W-WNL - page 89

    DLP Projector—User’s Manual — 80 — R EGULATORY C OMPLIANCE FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipm ent is operated in a commercial e ...

  • Vivitek D5110W-WNL - page 90

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l – 81 – A PPENDIX I RS-232C Protocol RS232 Setting Baud rate: 9600 Parity check: None Data bit: 8 Stop bit: 1 Flow Control None Control Command Structure Header code Command code Data c ...

  • Vivitek D5110W-WNL - page 91

    DLP Projector—User’s Manual — 82 — Command Group 01 ASCII HEX Function Description Return Value VXXG0101 56h Xh Xh 47h 30h 31h 30h 31h 0D h Get Brightness n=0~100 Pn/F VXXS0101n 56h Xh Xh 53h 30h 31h 30h 31h nh 0Dh Set Br ightness n=0~100 P/F VXXG0102 56h Xh Xh 47h 30h 31h 30h 32h 0D h Get Contrast n=0~100 Pn/F VXXS0102n 56h Xh Xh 53h 30h 3 ...

  • Vivitek D5110W-WNL - page 92

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l – 83 – Command Group 02 ASCII HEX Function Description Return Value VXXS0209 56h Xh Xh 53h 30h 32h 30h 39h 0Dh Select HDMI 2 (MEDIA) P/F VXXS0210 56h Xh Xh 53h 30h 32h 31h 30h 0Dh Sele ...

  • Vivitek D5110W-WNL - page 93

    DLP Projector—User’s Manual — 84 — Command Group 03 ASCII HEX Function Description Return Value VXXS0308n 56h Xh Xh 53h 30h 33h 30h 38h nh 0Dh Projection Mo de 0:Front 1:Rear 2:Ceiling 3:Rear+Ceiling P/F VXXG0309 56h Xh Xh 47h 30h 33h 30h 39h 0Dh Set vertical keystone value n=-40~+40 Pn/F VXXS0309n 56h Xh Xh 53h 30h 33h 30h 39h nh 0Dh Set v ...

  • Vivitek D5110W-WNL - page 94

    D D D L L L P P P P P P r r r o o o j j j e e e c c c t t t o o o r r r — — — U U U s s s e e e r r r ’ ’ ’ s s s M M M a a a n n n u u u a a a l l l – 85 – Command Group 04 (Remote Contro l) ASCII HEX Function Description Return Value VXXS0401 56h Xh Xh 53h 30h 34h 30h 31h 0Dh UP arrow P/F VXXS0402 56h Xh Xh 53h 30h 34h 30h 32h 0Dh ...

Manufacturer Vivitek Category Video projector

Documents that we receive from a manufacturer of a Vivitek D5110W-WNL can be divided into several groups. They are, among others:
- Vivitek technical drawings
- D5110W-WNL manuals
- Vivitek product data sheets
- information booklets
- or energy labels Vivitek D5110W-WNL
All of them are important, but the most important information from the point of view of use of the device are in the user manual Vivitek D5110W-WNL.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Vivitek D5110W-WNL, service manual, brief instructions and user manuals Vivitek D5110W-WNL. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Vivitek D5110W-WNL.

Similar manuals

A complete manual for the device Vivitek D5110W-WNL, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Vivitek D5110W-WNL by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Vivitek D5110W-WNL.

A complete Vivitek manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Vivitek D5110W-WNL - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Vivitek D5110W-WNL, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Vivitek D5110W-WNL, that we can find in the current document
3. Tips how to use the basic functions of the device Vivitek D5110W-WNL - which should help us in our first steps of using Vivitek D5110W-WNL
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Vivitek D5110W-WNL
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Vivitek D5110W-WNL in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Vivitek D5110W-WNL?

Use the form below

If you did not solve your problem by using a manual Vivitek D5110W-WNL, ask a question using the form below. If a user had a similar problem with Vivitek D5110W-WNL it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)