English dropdown-ico

Manual Sony HK-PSU02

34 pages 0.73 mb
Download

Go to site of 34

Summary
  • Sony HK-PSU02 - page 1

    INSTALLATION MANUAL 1st Edition DME PROCESSOR PACK MVE-8 0 00A-C MVE-8000A MULTI FORMAT DME PROCESSOR HK-PSU02 MKE-8020A MKE-8040A ...

  • Sony HK-PSU02 - page 2

    MVE-8000A ! WARNING This manual is intended for qualified service personnel only. To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified service personnel. ! WARNUNG Die Anleitung ist nur für quali ...

  • Sony HK-PSU02 - page 3

    MVE-8000A 1 (P) Attention-when the product is installed in Rac k: 1. Prevention against o verloading of branch cir cuit When this product is installed in a rack and is supplied power from an outlet on the r ack, please make sure that the r ack does not o verload the supply circuit. 2. Pro viding protective earth When this product is installed in a ...

  • Sony HK-PSU02 - page 4

    ...

  • Sony HK-PSU02 - page 5

    1 MVE-8000A Table of Contents Manual Structure Purpose of this manual .............................................................................................. 2 Related manuals ......................................................................................................... 2 Contents .................................................. ...

  • Sony HK-PSU02 - page 6

    2 MVE-8000A Purpose of this manual This manual is the installation manual of DME Processor Pack MVE-8000A-C and their optional boards and units. This manual is intended for use by trained system and service engineers, and describes the information on installing the MVE-8000A-C system. Related manuals The following manuals are prepared for MVE-8000A ...

  • Sony HK-PSU02 - page 7

    1-1 MVE-8000A Section 1 Installation 1-1. Operating Environment Operating guaranteed temperature : + 5 d C to + 40 d C Performance guaranteed temperature : + 10 d C to + 35 d C Operating humidity : 10 % to 90 % (relative humidity) Storage temperature : _ 20 d C to + 60 d C Mass (when all options are installed) : Approx. 16.5 kg Prohibited locations ...

  • Sony HK-PSU02 - page 8

    1-2 MVE-8000A For customers in the all European countries 1 Power cord, 250 V 10 A (2.4 m) : ! 1-782-929-12 1 AC inlet 1-2-2. Recommended Power Cord This unit does not come with a power cord. To get a power cord, please contact your local Sony Sales Office/Service Center. w . Use the approved Power Cord (3-core mains lead)/ Appliance Connector/Plug ...

  • Sony HK-PSU02 - page 9

    1-3 MVE-8000A 482 375 440 520 35 380 26Ø 61 87.5 17.5 105 7 MVE-8000A MULTI FORMAT DME PROCESSOR 1-3. Installation Space (External dimensions) Unit : mm ...

  • Sony HK-PSU02 - page 10

    1-4 MVE-8000A Screws (with drop-safe) Front door assembly Screws (with drop-safe) 1-4. Installing the Options The MVE-8000A-C is shipped from the factory with the necessary option (refer to the following table) already installed in the MVE-8000A, in accordance with the specified system configuration. MVE-8000A-C options Model name Board configurati ...

  • Sony HK-PSU02 - page 11

    1-5 MVE-8000A Eject lever Plug-in board Plug-in board Eject lever Eject levers Plug-in board 4. While the eject levers are kept open as shown in the illustration, insert the plug-in board into the board guide rails. Name of option Name of board Slot on the front side MKE-8040A DVP-30A board * 1 2, 3 * 1 : The DVP-30A boards are assigned to the foll ...

  • Sony HK-PSU02 - page 12

    1-6 MVE-8000A B3 x 5 Cov er panel (Slot 2) B3 x 5 Cov er panel Slot 1 1-4-2. Installing the Connector Board The board slot Name of option Name of board Slot on the rear side MKE-8020A CN-2153 board 1 Installation procedure Parts required (Supplied accessory of MKE-8020A) . Connecting cable . Cable holder bracket 1. Remove the two screws and remove ...

  • Sony HK-PSU02 - page 13

    1-7 MVE-8000A PSW3 x 6 Power dummy panel B3 x 5 Connecting cable Connecting cable Connecting cable Cov er panel (Slot 2) Cable holder brack et Cable holder brack et 1-4-3. Installing the HK-PSU02 The HK-PSU02 is used after it is installed in the MVE- 8000A. c Before installing the HK-PSU02, be sure to turn off the main power. If the HK-PSU02 is ins ...

  • Sony HK-PSU02 - page 14

    1-8 MVE-8000A HK-PSU02 PSW3 x 6 3. Push the portion of the HK-PSU02 indicated by the arrow and insert the HK-PSU02 into deep end as far as it will go. 4. Secure the HK-PSU02 with the two screws removed in step 2. 5. Install the front door assembly by reversing the installation steps 1 to 4. ...

  • Sony HK-PSU02 - page 15

    1-9 MVE-8000A 1-5. Rack Mounting The MVE-8000A installs in a 19-inch standard rack. To mount the MVE-8000A in a rack, use the specified rack mount kit and follow the procedure described below. Specified rack mount kit : RMM-10 n If a rack mount kit other than the specified one is used, the unit may not be correctly install in a 19-inch standard rac ...

  • Sony HK-PSU02 - page 16

    1-10 MVE-8000A B4 x 10 2U B4 x 10 31.75 31.75 Unit : mm 5. Tighten the screws (B4 x 6 : two screws each on the right and left) for adjusting the length of the adaptor completely (the screws that were loosened in step 2). 6. Align the groove of the rack tool at the side of the equipment with the rail, and slide the equipment to the rear. n The rack ...

  • Sony HK-PSU02 - page 17

    1-11 MVE-8000A 1-6. Matching Connectors and Cables Use the following connectors, cables or equivalents when connecting cables to the unit. Model name Panel indication Connector name Matching connector and cable Name Sony part No. MVE-8000A REF IN BNC, 75 Z BNC, 75 Z BELDEN 8281 coaxial cable REMOTE 1-4 D-sub 9-pin, Female D-sub 9-pin, Male Connecto ...

  • Sony HK-PSU02 - page 18

    1-12 MVE-8000A <Relay> GPI OUT n B GPI OUT 5-8 GPI OUT COM <Open collector output> n;1-4 + V GPI OUT n A ( * 2) ( * 3) 1-7. Input/Output Signals of Connectors The input/output signals of the connectors at the rear panel are as follows. n <CONTROLLER> indicates a controlling device. <DEVICE> indicates a controlled device. REM ...

  • Sony HK-PSU02 - page 19

    1-13 MVE-8000A 1-8. Checks on Completion of Installation 1-8-1. On-board Switches Setting and LED Functions n The number shown in parentheses ( ) indicates the address on the circuit board. 1. CA-54CFC board (MVE-8000A) <LED> D4 (A-1) : + + + + + 3.3 V + + + + + 3.3 V power supply status indication. Lit when the + 3.3 V power is supplied. D5 ...

  • Sony HK-PSU02 - page 20

    1-14 MVE-8000A <Switch> S101 (A-3) : Mode setting switch for the main CPU Sets the modes of the main CPU, but this switch is current- ly not in use. Factory setting is all OFF. S102 (A-2) : Group ID setting switch for LAN Sets the group ID for connecting LAN. Factory setting and in standard use : Bit 1 : ON Bits 2 to 8 : OFF S103 (A-2) : Unit ...

  • Sony HK-PSU02 - page 21

    1-15 MVE-8000A S1101 (A-4) : Monitor reset switch for the COM CPU-2 Used for maintenance purpose. Pressing this switch resets the system while maintaining this unit through the COM CPU-2 control terminal pin (CN703). S1102 (A-4) : Modes setting switch for the COM CPU-2 Sets the modes of the COM CPU-2, but this switch is currently not in use. Factor ...

  • Sony HK-PSU02 - page 22

    1-16 MVE-8000A <Switch on the CPU-DK module> : COM CPU-1 : COM CPU-2 SW1 (D-5) : RESET switch Pressing this switch resets the CPU-DK module. n In some machines in which the CPU-DK module is installed, the system reset may be activated. SW2 (C-5) : MODE switch Used only for production in the assembly factory. All switches are set to OFF for no ...

  • Sony HK-PSU02 - page 23

    1-17 MVE-8000A ABC D EFG HJ K D504 D501 D502 D505 D503 D506 S901 S1201 D1204 D1203 D1202 D1201 D703 D702 D701 ND1101 ND1102 S801 S1101 ND1201 ND1202 D1104 D1103 D1102 D1101 D1004 D1002 D1003 D1001 1 2 3 4 5 6 7 8 D12 D18 D19 D14 D15 D16 D17 D10 D13 SW2 SW1 CPU-DR Module (CPU B) A B C D E F G 654321 D12 D18 D19 D14 D15 D16 D17 D10 D13 SW2 SW1 CPU-DR ...

  • Sony HK-PSU02 - page 24

    1-18 MVE-8000A <LED on the CPU-DR module> (C-3) and (C-7) Refer to <LED on the CPU-DR module> in “1. CA-54 CFC Board”. <Switch on the CPU-DR module> (C-3) and (C-7) Refer to <Switch on the CPU-DR module> in “1. CA-54 CFC Board”. D1004 (A-7) : SYSTEM status LED Lit when configuration is complete and FPGA reset is also ...

  • Sony HK-PSU02 - page 25

    1-19 MVE-8000A A side/Component side TP502 TP504 TP501 TP503 E504 E201 TP401 E401 E506 1 2 3 4 5 6 A B C D E F G E505 E503 E501 TP801 TP802 TP803 TP804 TP805 E502 TP301 TP1104 TP1101 TP1102 TP1103 TP601 E301 TP201 CN1501 S901 D1001 D1004 D1003 D1002 D502 D501 D504 D503 E1 4 32 1 A B C D E F G H J E2 TP2 TP1 E3 CN3 CN4 S2 CN5 S1 D7 D6 D5 D9 D10 D11 ...

  • Sony HK-PSU02 - page 26

    1-20 MVE-8000A <Connector> CN1501 (C1) : ISP common connector Used for writing a program in the JTAG device with ISP in the production process. <TEST terminals> E201 (F1), E301 (E1), E401 (G2), E501 (A6), E502 (A1), E503 (D6), E504 (D3), E505 (G5), E506 (F3) : GND terminals Used as ground terminals when measuring voltages on the check t ...

  • Sony HK-PSU02 - page 27

    1-21 MVE-8000A D13 (G1) : DLKD status LED Lights when the DLL of the FPGA is locked. If this LED does not light, the FPGA may be defective. D14 (G1) : RCB DONE status LED Lights when the FPGA configuration is completed. D15 (G1) : SYSTEM status LED Lights when the system configuration and FPGA reset are completed. If this LED does not light, the FP ...

  • Sony HK-PSU02 - page 28

    1-22 MVE-8000A 1-9. System Connection Connection Example of the MVS-8000/8000A System (MKE-8020A Installed) CTRL DME 1A DME 1B SWITCHER B SWITCHER A CTRL CTRL PERIPH PERIPH DATA DATA DATA Reference video signal b) BVE-9100 Editing Control System Ethernet switch a) MVE-8000A-C DME Processor Pack MKS-8010A System Control Unit Reference video signal b ...

  • Sony HK-PSU02 - page 29

    1-23 MVE-8000A Flow of Video Signals (MKE-8020A Installed) The figure below shows the flow of video signals in a MVS-8000/8000A system. SWITCHER B DME 1B MONITOR OUTPUT 1-8 OUTPUTS 1-48 PRIMARY INPUTS 1-80 DME 1A SWITCHER A MVE-8000A-C DME Processor Pack Reference video signal c) Monitor Reference video signal c) 100 to 240 V AC power supply a) Cam ...

  • Sony HK-PSU02 - page 30

    ...

  • Sony HK-PSU02 - page 31

    2-1 MVE-8000A Flow2 The monitor picture is not display ed correctly ev en though the main power of the MVE-8000A is turned on. Are the plug-in boards inser ted into their correct slots? Are the option boards inser ted into their correct slots? Are the input and output cables connected correctly? Inser t the plug-in boards into the correct slots . ( ...

  • Sony HK-PSU02 - page 32

    2-2 MVE-8000A Front door assembly Filters 2-3. About the Data Backup Capacitor A large capacitor is installed on the CA-54CFC board in order to backup the memory storing the setup and other data in the MVE-8000A. Leave the main power of the MVE-8000A turned on for an hour or longer in order to charge this capacitor. The data is backed up for about ...

  • Sony HK-PSU02 - page 33

    MVE-8000A The material contained in this manual consists of inf or mation that is the property of Sony Cor poration. Sony Corporation e xpressly prohibits the duplication of any portion of this manual or the use thereof for an y purpose other than the operation or maintenance of the equipment described in this manual without the e xpress written pe ...

  • Sony HK-PSU02 - page 34

    Printed in Japan Son y Cor poration 2004. 7 08 B&P Company ©2004 MVE-8000A-C (SY) E 3-855-834-01 (1) ...

Manufacturer Sony Category Radio

Documents that we receive from a manufacturer of a Sony HK-PSU02 can be divided into several groups. They are, among others:
- Sony technical drawings
- HK-PSU02 manuals
- Sony product data sheets
- information booklets
- or energy labels Sony HK-PSU02
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sony HK-PSU02.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sony HK-PSU02, service manual, brief instructions and user manuals Sony HK-PSU02. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sony HK-PSU02.

Similar manuals

A complete manual for the device Sony HK-PSU02, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sony HK-PSU02 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sony HK-PSU02.

A complete Sony manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sony HK-PSU02 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sony HK-PSU02, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sony HK-PSU02, that we can find in the current document
3. Tips how to use the basic functions of the device Sony HK-PSU02 - which should help us in our first steps of using Sony HK-PSU02
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sony HK-PSU02
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sony HK-PSU02 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sony HK-PSU02?

Use the form below

If you did not solve your problem by using a manual Sony HK-PSU02, ask a question using the form below. If a user had a similar problem with Sony HK-PSU02 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)