Manual Quatech ABDB-ET Series

77 pages 1.1 mb
Download

Go to site of 77

Summary
  • Quatech ABDB-ET Series - page 1

    Quatech, Inc. Confidential AirborneDirect™ PP PP Ethernet Bridge User’s Guide TT T 802.11b/g ABDG-ET Series WLNG-ET Series 802.11b ABDB-ET Series WLNB-ET Series Document number 100-8007-141G ...

  • Quatech ABDB-ET Series - page 2

    ALL RIGHTS RESERVED. No part of this publication may be copied in any form, by photocopy, microfilm, retrieval system, or by any other m eans now known or hereafter invented without the prior written permission of Quatech, Inc. This document may not be used as the basis for manufacture or sale of any items without the prior written consent of Quate ...

  • Quatech ABDB-ET Series - page 3

    CONTENTS 100-8007-141G AirborneDirect™ Ethernet Br idge User's Guide Page i Quatech, Inc. Confidential CHAPTER 1 INTRODUCTION ............................................................................................................................... .1 TT F EATURES AND B ENEFITS TT ........................................................ ...

  • Quatech ABDB-ET Series - page 4

    Contents Page ii AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential I NDUSTRY C ANADA N OTICE (A PPLICABLE TO U SE W ITHIN C ANADA ) ............................................................. 60 A VIS DE C ONFORMITE A LA R EGLEMENTATION D ’I NDUSTRIE C ANADA ........................................... ...

  • Quatech ABDB-ET Series - page 5

    Contents 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page iii Quatech, Inc. Confidential LIST OF FIGURES Figure 1. Basic Application Involving a LAN Host and Ethernet Client ........................................ 3 Figure 2. AirborneDirect™ Ethernet Bridge Hardware (standard package) ................................. 9 Fi ...

  • Quatech ABDB-ET Series - page 6

    Contents Page iv AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential LIST OF TABLES Table 1. AirborneDirect™ Ethernet Bridge Features and Benefits .............................................. 2 Table 2. AirborneDirect™ Ethernet Bridge Indicator LEDs .................................................... ...

  • Quatech ABDB-ET Series - page 7

    100-8007-141G AirborneDirect™ Ethernet Br idge User's Guide Page 1 Quatech, Inc. Confidential TT This guide describes the AirborneDirect™ Ethernet Bridge from Quatech, Inc. AirborneDirect™ is a fully integrated, 802.11 wireless Local Area Network (LAN) connectivity device designed to provide wireless LAN and Internet connectivity in indu ...

  • Quatech ABDB-ET Series - page 8

    Introduction Page 2 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential TT FEATURES AND BENEFITS TT The key features and benefits of the TT AirborneDirect™ Ethernet Bridge are described in TXTX Table 1 XTXT . TT Table 1. AirborneDirect™ Ethernet Bridge Features and Benefits Feature Benefit TT Small pack ...

  • Quatech ABDB-ET Series - page 9

    Introduction 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 3 Quatech, Inc. Confidential SAMPLE APPLICATION XX Figure 1 XX shows a basic application where the TT AirborneDirect™ Ethernet Bridge is exchanging data wirelessly between an Ethernet client and a LAN host. In this application:  TT The Ethernet TT client can b ...

  • Quatech ABDB-ET Series - page 10

    Introduction Page 4 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential TT USING THIS DOCUMENT TT In addition to this chapter, this guide contains the following chapters and appendixes:  Chapter 2, Hardware Installation ⎯ describes the AirborneDirect™ Ethernet Bridge hardware and how to install it. ? ...

  • Quatech ABDB-ET Series - page 11

    Introduction 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 5 Quatech, Inc. Confidential CONVENTIONS The following conventions are used in this guide: TT Terminology In the following chapters, these terms are used:  “AirborneDirect™ Ethernet Bridge” is used the first time the Bridge is mentioned in a chapter. There ...

  • Quatech ABDB-ET Series - page 12

    Introduction Page 6 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential RELATED DOCUMENTATION In addition to this guide, the following documents are provided on the CD supplied with the AirborneDirect™ Ethernet Bridge:  TT AirborneDirect™ Ethernet Bridge User’s Guide.  TT AirborneDirect™ Ether ...

  • Quatech ABDB-ET Series - page 13

    100-8007-141G AirborneDirect™ Ethernet Br idge User's Guide Page 7 Quatech, Inc. Confidential TT This chapter describes the TT AirborneDirect™ Ethernet Bridge. TT Topics in this chapter include:  TT Package Contents. (below)  TT Items Supplied by the User. (below)  TT Hardware Description. (page XX 9 XX )  TT Selecting a Locati ...

  • Quatech ABDB-ET Series - page 14

    Hardware Installation Page 8 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential TT ITEMS SUPPLIED BY THE USER TT The following items, which are not included in the package contents, are also required:  TT An Ethernet client, with an RJ-45 jack, that is within the transmit and receive range of the Access ...

  • Quatech ABDB-ET Series - page 15

    Hardware Installation 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 9 Quatech, Inc. Confidential STANDARD PACKAGE HARDWARE DESCRIPTION XX XX Figure 2 XX identifies the components on the Bridge in its standard packaging. These components include:  An external antenna.  An RJ-45 jack and cable attached to the Bridge. ? ...

  • Quatech ABDB-ET Series - page 16

    Hardware Installation Page 10 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential Indicator LEDs The Bridge has three indicator LEDs for viewing its current status and its connections (see XX Figure 3 XX ). These indicators allow for monitoring and troubleshooting of the Bridge. They also indicate the Bridg ...

  • Quatech ABDB-ET Series - page 17

    Hardware Installation 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 11 Quatech, Inc. Confidential Table 2. AirborneDirect™ Ethernet Bridge Indicator LEDs LED LED Color Function Off Bridge is not receiving power. Red Bridge failed its Power On Self Test (POST) and is not configured for wireless communication. Amber Bridge ...

  • Quatech ABDB-ET Series - page 18

    Hardware Installation Page 12 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential Mounting Cradle The Bridge comes with a mounting cradle that allows the Bridge to be installed on a vertical surface, such as a wall (see XX Figure 4 XX ). Be careful not to tighten the mounting hardware (user- supplied) exces ...

  • Quatech ABDB-ET Series - page 19

    Hardware Installation 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 13 Quatech, Inc. Confidential HEAVY-DUTY PACKAGE The heavy-duty version of the Bridge is supplied in a Deutsch EEC-325X4B enclosure and is available in both sealed and unsealed versions. The heavy-duty Bridge supports SAE J1455 power specifications (+4.5 t ...

  • Quatech ABDB-ET Series - page 20

    Hardware Installation Page 14 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential Figure 6. AirborneDirect™ Heavy-Duty Cable (Evaluation Kit Item) ...

  • Quatech ABDB-ET Series - page 21

    Hardware Installation 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 15 Quatech, Inc. Confidential Indicator LEDs The Heavy-Duty Bridge has four indicator LEDs for viewing its current status and connections (see Figure 5). These indicators allow for monitoring and troubleshooting of the Bridge. They also indicate the Bridge ...

  • Quatech ABDB-ET Series - page 22

    Hardware Installation Page 16 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential SELECTING A LOCATION You can mount the Bridge on a flat surface, such as a desk or table, or on a vertical surface, such as a wall. It can also be mounted on the ceiling. If you mount the Bridge vertically, use the supplied mo ...

  • Quatech ABDB-ET Series - page 23

    Hardware Installation 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 17 Quatech, Inc. Confidential CONNECTING THE BRIDGE The following procedure describes how to connect the Bridge: • Place the Bridge in a dry, clean location near the device to which it will be connected. The location is required to have an AC power sourc ...

  • Quatech ABDB-ET Series - page 24

    Hardware Installation Page 18 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential This page intentionally left blank. ...

  • Quatech ABDB-ET Series - page 25

    100-8007-141G AirborneDirect™ Ethernet Br idge User's Guide Page 19 Quatech, Inc. Confidential CHAPTER 3 INITIAL CONFIGURA TION This chapter describes configuring the AirborneDirect™ Ethernet Bridge. Topics in this chapter include:  Wireless Configuration. (below)  Verifying Your Connections (page 20)  WPA-LEAP Security. (page 20) ...

  • Quatech ABDB-ET Series - page 26

    Initial Configuration Page 20 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential No t e : If you do not see the Bridge as an attached device, refresh the configuration screen (some Access Point programs provide a Refresh button for this purpose). If the Bridge still does not appear, refer to the troublesho ...

  • Quatech ABDB-ET Series - page 27

    Initial Configuration 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 21 Quatech, Inc. Confidential VERIFYING YOUR CONNECTIONS When the Bridge is powered-up, the indicator LEDs at the top of the Bridge will indicate the status of the Bridge. See Table 2 on page 11 for standard packaging, or Table 3 on page 15 for Heavy-Duty ...

  • Quatech ABDB-ET Series - page 28

    Initial Configuration Page 22 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential WPA-LEAP SECURITY The WPA and LEAP software modules provide advanced security configuration and communication services required by t oday’s enterprise-class deployments. Please refer to IEEE standard 802.1x 2001 (section 4) ...

  • Quatech ABDB-ET Series - page 29

    Initial Configuration 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 23 Quatech, Inc. Confidential  The Link LED turns green when 802.11 association completes. However, if the 802.1x authentication fails, the bridge becomes disassociated by the AP and the Link LED goes back to flashing red.  The bridge will not respon ...

  • Quatech ABDB-ET Series - page 30

    Initial Configuration Page 24 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential This page intentionally left blank. ...

  • Quatech ABDB-ET Series - page 31

    100-8007-141G AirborneDirect™ Ethernet Br idge User's Guide Page 25 Quatech, Inc. Confidential This chapter describes how to use the Airborne Control Center (ACC) to configure the AirborneDirect™ Ethernet Bridge. The ACC is a user-friendly graphical-user interface (GUI) menu and data display. The interface is intuitive, allowing tasks to b ...

  • Quatech ABDB-ET Series - page 32

    Airborne Control Center Page 26 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential Figure 9. Device login The IP address and telnet port number of the sele cted device are automatically transferred to the login page. Enter the user name and password (defaults “dpac” and “dpac”) and click on the OK ...

  • Quatech ABDB-ET Series - page 33

    Airborne Control Center 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 27 Quatech, Inc. Confidential NAVIGATING AROUND THE ACC A navigation bar appears at the top-right side of every screen in the ACC interface (see XX Figure 8 XX ). This bar contains links that correspond to the pages you can access. To go to a page, click ...

  • Quatech ABDB-ET Series - page 34

    Airborne Control Center Page 28 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential Advanced configuration activities consist of the following:  Changing the user name and administrator password Lets you change the user name and administrator password for accessing the configuration interface. See “ XX ...

  • Quatech ABDB-ET Series - page 35

    Airborne Control Center 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 29 Quatech, Inc. Confidential SAVING CONFIGURATION CHANGES Some pages have Save and Cancel buttons. If you change parameters on one of these pages, click Save to apply your changes or Cancel to discard them. Once the changes are saved, the ACC displays t ...

  • Quatech ABDB-ET Series - page 36

    Airborne Control Center Page 30 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential BASIC CONFIGURATION SETTINGS Status Page (Basic Configuration Settings) Figure 14. Status Page The Status Page is the first page that appears in the ACC. This read-only page shows information about the Bridge. You may need t ...

  • Quatech ABDB-ET Series - page 37

    Airborne Control Center 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 31 Quatech, Inc. Confidential Miscellaneous Settings Page (Basic Configuration Settings) Figure 15. Miscellaneous OEM Settings Page Clicking the Misc link in the navigation bar displays the Miscellaneous OEM Settings page. In this page, you can enter the ...

  • Quatech ABDB-ET Series - page 38

    Airborne Control Center Page 32 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential Table 5. Miscellaneous OEM Settings Parameter Description Miscellaneous OEM Settings OEM Version String Specifies the OEM version string to be associated with the Bridge. Default is oemverstr . OEM Discovery Name Specifies t ...

  • Quatech ABDB-ET Series - page 39

    Airborne Control Center 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 33 Quatech, Inc. Confidential Network Settings Page (Basic Configuration Settings) The Network Settings Page allows you to modify the 802.11 wireless network settings, including network identification, security, data rate, and discovery name. You are als ...

  • Quatech ABDB-ET Series - page 40

    Airborne Control Center Page 34 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential XX Figure 13. Wireless Netw ork Configuration Page XX (continued) XX Figure 13. Wireless Netw ork Configuration Page XX (continued) ...

  • Quatech ABDB-ET Series - page 41

    Airborne Control Center 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 35 Quatech, Inc. Confidential Table 6. Wireless Netw ork Configuration Settings Parameter Description Wireless Network Settings SSID Service Set Identifier that identifies the common service set for the Bridge and AP. To make this connection, the Bridge ...

  • Quatech ABDB-ET Series - page 42

    Airborne Control Center Page 36 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential Wireless Security Settings Wireless Security Mode Enables or disables wireless security: • Disable – Disable any security ( default ) • WEP64 – 64-bit key length (11 ASCII characters) • WEP128 – 128-bit key lengt ...

  • Quatech ABDB-ET Series - page 43

    Airborne Control Center 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 37 Quatech, Inc. Confidential LEAP Password Configures the WPA-LEAP password. The LEAP password [1 to 32 characters] must match the LEAP password assigned to the LEAP user on the LEAP server. The LEAP password cannot contain spaces. Authentication Define ...

  • Quatech ABDB-ET Series - page 44

    Airborne Control Center Page 38 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential Maximum Transmission Rate Bridge’s maximum wireless transmission rate. The Bridge will attempt the highest specified rate and fallback to a lower rate if necessary. Default is 5.5 Mbps. Netw ork IP Settings Enable DHCP Cli ...

  • Quatech ABDB-ET Series - page 45

    Airborne Control Center 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 39 Quatech, Inc. Confidential DHCP Fallback Subnet Configures the Subnet Mask used by the DHCP fallback algorithm. Default is 255.255.255.0 DHCP Fallback Gateway Configures the gateway addre ss used by the DHCP fallback algorithm. Default is 0.0.0.0 . St ...

  • Quatech ABDB-ET Series - page 46

    Airborne Control Center Page 40 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential Table 7. Region Country Codes Code Country Channels US United States 1-11 AT Austria 1-11 AU Australia 1-11 BR Brazil 1-11 CA Canada 1-11 CH Switzerland and Liechtenstein 1-11 CY Cyprus 1-11 CZ Czech Republic 1-11 DE Germany ...

  • Quatech ABDB-ET Series - page 47

    Airborne Control Center 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 41 Quatech, Inc. Confidential ADVANCED CONFIGURATION SETTINGS Services Page (Advanced Configuration Settings) The Services Page lets you configure the Bridge’s network services like Telnet and TCP Port settings. Figure 17. Netw ork Services Page ...

  • Quatech ABDB-ET Series - page 48

    Airborne Control Center Page 42 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential Table 8. Netw ork Serv ices Settings Parameter Description Enable UDAP When checked , enables Universal Data Appliance Protocol (UDAP). This allows the Bridge to be discovered from a LAN-based device that suppor ts the UDAP ...

  • Quatech ABDB-ET Series - page 49

    Airborne Control Center 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 43 Quatech, Inc. Confidential Security Settings Page (Advanced Configuration Setting) The Security Settings Page allows management of the authentication-based access services. You can change user names and passwords. Figure 18. Security Configuration Pag ...

  • Quatech ABDB-ET Series - page 50

    Airborne Control Center Page 44 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential Table 9. Security Configuration Settings Parameter Description Configuration User Name Specifies the user name required to log into the Bridge’s configur ation interface, from 1 to 31 alphanumeric characters. User name is ...

  • Quatech ABDB-ET Series - page 51

    Airborne Control Center 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 45 Quatech, Inc. Confidential Update Firmware Page (Advanced Configuration Settings) The Update Firmware Page allows you to update the firmware running on the AirborneDirect™ Ethernet Bridge. Caut io n : Updating firmware may cause the Bridge to stop o ...

  • Quatech ABDB-ET Series - page 52

    Airborne Control Center Page 46 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential No t e : The firmware must come from Quatech, Inc. as a .bin file and follow the file name format: DirectEthernet_ x.x.x.x .bin Where xxxx is the version number of the firmware. For example: DirectEthernet_4.2.0.12.bin TT Ca ...

  • Quatech ABDB-ET Series - page 53

    Airborne Control Center 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 47 Quatech, Inc. Confidential • The ACC will display the message shown in XX Figure 18 XX . Figure 21. Update Complete Message • Upon restarting, the Status Page will be displayed. If this does not happen automatically, close the ACC and restart it. ...

  • Quatech ABDB-ET Series - page 54

    Airborne Control Center Page 48 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential Reset Page (Advanced Configuration Settings) The Reset Page allows you restart or reset the Bridge to the factory default values. Caut io n : Resetting the AirborneDirect™ unit to factory defaults will remove all customer ...

  • Quatech ABDB-ET Series - page 55

    Airborne Control Center 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 49 Quatech, Inc. Confidential Restarting the Bridge When you click the Restart button, you will see the Warning displayed in XX Figure 20 XX . Click Yes to complete the Bridge restart or No to stop the process and return to the Reset Page. Figure 23. Con ...

  • Quatech ABDB-ET Series - page 56

    100-8007-141G AirborneDirect™ Ethernet Br idge User's Guide Page 50 Quatech, Inc. Confidential This chapter provides troubleshooting suggestions you can follow in the unlikely event you encounter a problem using the AirborneDirect™ Ethernet Bridge. TROUBLESHOOTING SUGGESTIONS Table 10. Troubleshooting Suggestions The Bridge cannot find the ...

  • Quatech ABDB-ET Series - page 57

    Troubleshooting 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 51 Quatech, Inc. Confidential After changing the Bridge’s static IP address, the ACC stops responding. Once the static IP address is changed and you click Save , the Bridge switches to the new IP address and loses connection with the ACC. To resolve this probl ...

  • Quatech ABDB-ET Series - page 58

    Troubleshooting Page 52 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential LED TROUBLESHOOTING The following table provides LED troubleshooting suggestions. Table 11. Indicator LED Troubleshooting If the… Perform These Tasks… Pow er LED does not turn On . Check power connector is properly inserted. Pow ...

  • Quatech ABDB-ET Series - page 59

    100-8007-141G AirborneDirect™ Ethernet Br idge User's Guide Page 53 Quatech, Inc. Confidential This appendix lists the specifications of the AirborneDirect™ Ethernet Bridge. Table 12. Specifications Ethernet Interface – standard package Interface: Ethernet 10Base-T Connector: RJ-45 Flexible, stranded, copper conductor cable Data Rates: 1 ...

  • Quatech ABDB-ET Series - page 60

    Specifications Page 54 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential Ethernet Interface – Heavy -Duty package Interface: Ethernet 10Base-T Connector: Deutsch DTM-06-12SSA Data Rates: 10 Mb/sec Pin Assignments: Pin No. Name Description 1 TXTP+ Transmit+ 2 RXTP+ Receive+ 3 NC No Connect 4 NC No Connec ...

  • Quatech ABDB-ET Series - page 61

    Specifications 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 55 Quatech, Inc. Confidential Wireless Netw ork Interface IEEE 802.11b DSSS, WiFi compliant Interface (ABDB, WLNB): (ABDG, WLNG): IEEE 802.11b/g, WiFi compliant (802.11i, 802.11e, 802.11d capable) Frequency: 2.4 ~ 2.4835 GHz (US, Europe, Canada, Japan) 2.471 ~ 2. ...

  • Quatech ABDB-ET Series - page 62

    Specifications Page 56 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential Indicators LEDs (standard): Power, Link, Comm LEDs (heavy -duty): Post, Cfg, Link, Conn Pow er (See Table 13 for Heav y -Duty ) Input: 110/240 V, 50-60 Hz, external power supply wall wart Consumption: 2 W max (AC Adaptor) Pow er Supp ...

  • Quatech ABDB-ET Series - page 63

    Specifications 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 57 Quatech, Inc. Confidential Standard Packaging Enclosure: Nylon – Grey Dimensions: 2.58 in. W x 4.03 in. L x 1.90 in. D (65.5 mm x 102.3 mm x 48.2 mm) Heavy -Duty Packaging Enclosure: Plastic Dimensions: 4.63 in. W x 5.24 in. L x 1.43 in. D (117.6 mm x 133.0 ...

  • Quatech ABDB-ET Series - page 64

    Specifications Page 58 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential Table 13 and Table 14 list power supply specifications for the Heavy-Duty Bridge. No t e : The standard package Bridge is powered by the included AC adapter. Table 13 and Table 14 do not apply to the standard package. Table 13. Heavy ...

  • Quatech ABDB-ET Series - page 65

    100-8007-141G AirborneDirect™ Ethernet Br idge User's Guide Page 59 Quatech, Inc. Confidential This appendix lists FCC compliance information for the AirborneDirect™ Ethernet Bridge. FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These lim ...

  • Quatech ABDB-ET Series - page 66

    FCC Compliance Page 60 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential MANUFACTURER’S DECLARATION OF CONFORMITY Trade Name: AirborneDirect™ Serial Bridge AirborneDirect™ Ethernet Bridge Airborne Embedded Radio Module Model Number: ABDB-SE-DP101 ABDB-ET-DP101 WLRG-RA-DP101 Compliance Test Report Nu ...

  • Quatech ABDB-ET Series - page 67

    FCC Compliance 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 61 Quatech, Inc. Confidential AVIS DE CONFORMITE A LA REGLEMENTATION D’INDUSTRIE CANADA Pour empêcher toute interférence aux services faisant l’objet d’une licence, cet appareil doit être utilisé à l’intérieur seulement et devrait être placé loin ...

  • Quatech ABDB-ET Series - page 68

    FCC Compliance Page 62 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential indicates that usage restrictions apply.  To ensure compliance with local regulations, be sure to select the country in which the access point is installed.  This product can be used as shown in the following table: EC DECLARAT ...

  • Quatech ABDB-ET Series - page 69

    FCC Compliance 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 63 Quatech, Inc. Confidential Countries Restrictions Hierbij verklaart DPAC Technologies Co rp. dat het toestel AirborneDirect™ Serial/Ethernet Bridge in overeenstemmi ng is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Dut ...

  • Quatech ABDB-ET Series - page 70

    FCC Compliance Page 64 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential This page intentionally left blank. ...

  • Quatech ABDB-ET Series - page 71

    100-8007-141G AirborneDirect™ Ethernet Br idge User's Guide Page 65 Quatech, Inc. Confidential This appendix provides a glossary of wireless terminology. 802.11 Wireless standards developed by the I EEE that specify an "over-the-air" interface for wireless Local Area Networks. 802.11 is composed of several standards operating in di ...

  • Quatech ABDB-ET Series - page 72

    Glossary Page 66 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential Disassociation service An IEEE 802.11 term that defines the pr ocess a station or Access Point uses to notify that it is terminat ing an existing association. Distribution service An IEEE 802.11 station uses the distri bution service to se ...

  • Quatech ABDB-ET Series - page 73

    Glossary 100-8007-141G AirborneDirect™ Et hernet Bridge User's Guide Page 67 Quatech, Inc. Confidential RTOS An operating system implementing com ponents and services that explicitly offer deterministic responses, and therefore allow the creation of real-time systems. An RTOS is charact e rized by the richness of the TT services TT it provid ...

  • Quatech ABDB-ET Series - page 74

    Glossary Page 68 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential This page intentionally left blank ...

  • Quatech ABDB-ET Series - page 75

    100-8007-141G AirborneDirect™ Ethernet Br idge User's Guide Page 69 Quatech, Inc. Confidential A Accessing the Web interface, 25 Advanced Configuration Settings, 41 AirborneDirect Ethernet Bridge features and benefits, 2 hardware description, 9 installation, 17 LEDs, 10 package contents, 7 reset switch, 9 sample application, 3 AirborneDirect ...

  • Quatech ABDB-ET Series - page 76

    Index Page 70 AirborneDirect™ Ethernet Br idge User's Guide 100-8007-141G Quatech, Inc. Confidential U Update Firmware Page, 45 Using This Document, 4 V VERIFYING YOUR CONNECTIONS, 21 W Web interface accessing, 25 configuration activities, 27 navigating through, 27 Web interface pages Network Settings, 33 Reset, 48 Services Page, 41 Status, ...

  • Quatech ABDB-ET Series - page 77

    100-8007-141G Revision 1.41 May 2007 ...

Manufacturer Quatech Category Network Router

Documents that we receive from a manufacturer of a Quatech ABDB-ET Series can be divided into several groups. They are, among others:
- Quatech technical drawings
- ABDB-ET Series manuals
- Quatech product data sheets
- information booklets
- or energy labels Quatech ABDB-ET Series
All of them are important, but the most important information from the point of view of use of the device are in the user manual Quatech ABDB-ET Series.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Quatech ABDB-ET Series, service manual, brief instructions and user manuals Quatech ABDB-ET Series. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Quatech ABDB-ET Series.

A complete manual for the device Quatech ABDB-ET Series, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Quatech ABDB-ET Series by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Quatech ABDB-ET Series.

A complete Quatech manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Quatech ABDB-ET Series - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Quatech ABDB-ET Series, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Quatech ABDB-ET Series, that we can find in the current document
3. Tips how to use the basic functions of the device Quatech ABDB-ET Series - which should help us in our first steps of using Quatech ABDB-ET Series
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Quatech ABDB-ET Series
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Quatech ABDB-ET Series in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Quatech ABDB-ET Series?

Use the form below

If you did not solve your problem by using a manual Quatech ABDB-ET Series, ask a question using the form below. If a user had a similar problem with Quatech ABDB-ET Series it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)