Manual Siemens 9300

176 pages 4.42 mb
Download

Go to site of 176

Summary
  • Siemens 9300 - page 1

    930 0 S eries P ower Meter User’ s Guide ...

  • Siemens 9300 - page 2

    ...

  • Siemens 9300 - page 3

    SUMMAR Y These instr uctions do not purport to cover all details or v ariations in equipmen t, nor to provide for e very possible contingency to be m et in connect ion with in stallation , operation, or maintenance. Should fur ther information be desired or should particular problems aris e which are not cov ered suf ficiently f or the purc haser ? ...

  • Siemens 9300 - page 4

    Notices Danger This symbol indicates the presence of dangerous vo l tage within and outside the product enclosure that may constitute a risk of electric shock, serious injury or death to pe rsons if proper precautions are not followed. Caution This symbol alerts the user to the presence of hazards that may cause minor or moderate injury to persons ...

  • Siemens 9300 - page 5

    C AUTION Observe the follow ing instructions, or pe rmanent damage to the meter may occur.  The 93 00 Ser ies meter offers a range of hardware options that affect input ratin gs. Th e 9300 S eries meter ’ s seri al numb er lab el list s all e quippe d opti ons. Applying current levels incompatible with the current inpu ts will permanently dama ...

  • Siemens 9300 - page 6

    ...

  • Siemens 9300 - page 7

    Contents Chapter 1 Introduction  9300 Series Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  The ACCESS Meter in an Enterprise Energy Management System . . . . . . . . 14 Data Display and Analysis Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Communication ...

  • Siemens 9300 - page 8

    Meter Clock Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Display Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Demand Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Siemens 9300 - page 9

    Telnet and Hyperterm inal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118  Digital and Analog I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Specifying a Port In an ION Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Using the Onbo ...

  • Siemens 9300 - page 10

    COM 2 Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 7 COM 3 Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 8 Ethernet Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Siemens 9300 - page 11

    1 Introduction The 9300 Series intelligent metering an d control devices are typically used in enterprise energy management system s such as feeder monitoring and submetering, and offer unmatched value, functionality, and ea se of use. These meters interfac e to WinPM.Net software or other automation systems for fast information sharing and analysi ...

  • Siemens 9300 - page 12

    9300 Series Meters 9300 Series User’s Guide Page 12 Chapter 1 - Introduction 9300 Series Meters The 9300 Series meters are intelligent meteri ng and control device s suited to a wide range of applications. The meters can be used as stand-alone devices, but their extensive capabilities are full y realized when used as part of an enterprise energy ...

  • Siemens 9300 - page 13

    9300 Series User’s Gui de 9300 Series Meters Chapter 1 - In troducti on Page 1 3 WinPM.Net™ is a powerful web-ready software suite th at can process, analyze, store, and share information from ac ross your entire organization. Its compatibility and flexibility mean s you can introduce individual com ponents, at a pace you decide, whil e maintai ...

  • Siemens 9300 - page 14

    The ACCESS Meter in an Enterprise Energy Manageme nt System 9300 Series User’s Guide Page 14 Chapter 1 - Introduction The ACCESS Meter in an Enterprise Energy Management System Applications that incl ude the meter typically require additional equipmen t. Display and analysis software tools are al most always used to manage, interpret and distribu ...

  • Siemens 9300 - page 15

    9300 Series User’s Gui de Data Display and Analysis T ools Chapter 1 - In troducti on Page 1 5 The Front Panel Local monitoring and standalone applicati ons are facilitated by the meter’s front panel interface. The f ront panel combines real-ti me display features as well as device configuration functions. The Remote Modular Display The Remote ...

  • Siemens 9300 - page 16

    Communications Protocols 9300 Series User’s Guide Page 16 Chapter 1 - Introduction WinPM.Net also offers two ways to re motely view information through a web browser: WebReach and Microsoft Terminal Services.  W ebReach only requires an URL to disp lay a meter ’ s real-time data and select views of historical and wav eform data fro m a web b ...

  • Siemens 9300 - page 17

    9300 Series User’s Gui de The Meter is Factory-Configured and Ready to Operate Chapter 1 - In troducti on Page 1 7 Digital Outputs All 9300 Series meters have four programmable digital output ports. These are suitable for pulsing or controlling relays. The Infrared Data Port and/or a rear panel LED can also be used for ene rgy pulsing. Status Inp ...

  • Siemens 9300 - page 18

    Meter Firmware Revision History 9300 Series User’s Guide Page 18 Chapter 1 - Introduction Meter Firmware Revision History 9300 Models 9330 Models 9350 Models Firmware Ve r s i o n Release Date Firmware Enhancements V250 June 2000 Rev B Hardware Initial Release Improved communications performance F our Calibration Pulse rs added Harmonic update ti ...

  • Siemens 9300 - page 19

    9300 Series User’s Gui de Ethernet Card Firmware Revision History Chapter 1 - In troducti on Page 1 9 Ethernet Card Firmware Revision History Firmware Ve r s i o n Release Date Firmware Enhancements V102 June 2000 Maintenance release (support for Rev B hardware) V270 Se ptember 2001 MeterM@il support adde d (with 9330V270 f irmware) Modbus T CP s ...

  • Siemens 9300 - page 20

    Using this Guide 9300 Series User’s Guide Page 20 Chapter 1 - Introduction Using this Guide This User’s Guide is directed at three type s of user : the typical user or operator, the system administrator, and the advanced us er. You might not fit into any of these groups directly, or perhaps you are both an operator and an administrator. These c ...

  • Siemens 9300 - page 21

    9300 Series User’s Gui de Getting More Informa tion Chapter 1 - In troducti on Page 2 1 WinPM.Net Getting Star ted Guide This guide explains the installation and configuration of the WinPM. Net softwa re suite. Online WinPM.Net Help Each WinPM.Net software component ha s an in-depth online help system. Application Notes Online application notes o ...

  • Siemens 9300 - page 22

    Getting More Information 9300 Series User’s Guide Page 22 Chapter 1 - Introduction ...

  • Siemens 9300 - page 23

    2 Using The Front Panel The meter’s front panel is used for both display and configuration purpo ses. The liquid crystal disp lay (LCD) screen and the numerous selection, navi gation, and configuration buttons allow quick access to basic meter configuration provided by special setup screens. The front panel also provides access to the settings of ...

  • Siemens 9300 - page 24

    Displaying Data with the Front P anel 9300 Series User’s Guide Page 24 Chapter 2 - Using The Front P anel Displaying Data with the Front Panel The front panel provides a detailed graphi cs and text display for the meter. The front panel is configured at the factory with eight displays showing som e of the more commonly used power system values me ...

  • Siemens 9300 - page 25

    9300 Series User’s Gui de Default Front P anel Display Screens Chapter 2 - Using The Front P anel Page 2 5 Numeric values are displayed in base units; voltages are displayed in volts, while current is displayed in amps. The following values, however, are displayed in kilo units rather than base units since kilo is the most frequently used value r ...

  • Siemens 9300 - page 26

    Default Front P anel Display Screens 9300 Series User’s Guide Page 26 Chapter 2 - Using The Front P anel N OTE Your default data display screens will diff er if the meter is in Fixed mode (refe r to “Display Mode” on page 34), or if your meter has custom displays. Display 4 (Amps) P er-phase and average current Display 8 (I-THD) P er-phase Cu ...

  • Siemens 9300 - page 27

    9300 Series User’s Gui de Configuring the Meter with the Front P anel Chapter 2 - Using The Front P anel Page 2 7 Configuring the Meter with the Front Panel The front panel provides meter setup capability a t the meter’s installed locati on. All of the meter’s setup registers can be configured moving through menus on the front panel’s scree ...

  • Siemens 9300 - page 28

    Clear Functions Menu 9300 Series User’s Guide Page 28 Chapter 2 - Using The Front P anel Editing Registers To edit the value of a register, navigate the registers using the arrow keys until the register you want is highlighted, then pr ess the round button. The register appe ars in one of two ways: as a number, o r as an option selected from a me ...

  • Siemens 9300 - page 29

    9300 Series User’s Gui de Clear Func tions M enu Chapter 2 - Using The Front P anel Page 2 9 Sliding Window Demand Reset These Sliding Window Demand values are reset when SWD EMAND R SET is selected: Thermal De mand Reset The following Thermal Demand parameters are reset when TD EMAND R SET is selected: Manual W aveform T rigger Select this menu ...

  • Siemens 9300 - page 30

    Quick Setup Menu 930 0 Series User’s Guide Page 30 Chapter 2 - Using The Front P anel Quick Setup Menu Select Q UICK S ETUP from the Setup menu to access to the Power Meter module and the Communications module settings. These settings are all configured whe n the meter is init ially put into ser vice — typicall y you will not need to change the ...

  • Siemens 9300 - page 31

    9300 Series User’s Gui de Quick Setup Menu Chapter 2 - Using The Front P anel Page 3 1 Ethernet Menu The Ethernet module controls the mete r’ s optional 10Base-T port. Configuring the Ethernet module registers incorrectly can cause network disruptions. The following settings can be access ed through the Ethernet Menu: 1 Settings available for 9 ...

  • Siemens 9300 - page 32

    Advanced Meter Setup Menu 9300 Series User’s Guide Page 32 Chapter 2 - Using The Front P anel The remaining Power Meter module setup options and their default values are given in the online ION Programmer’s Reference . In most cases you can leave them at their default settings and the meter will function properly. Sag/Swell Module Settings (935 ...

  • Siemens 9300 - page 33

    9300 Series User’s Gui de Display Setup Menu Chapter 2 - Using The Front P anel Page 3 3 Display Setup Menu When you select D ISPLAY S ETUP from the Setup menu, you get these settings : Auto Scroll Auto Scroll activates each of the enabled display screens in sequence. By default, the Auto Scroll is disabled. Use the arrow buttons to specify th e ...

  • Siemens 9300 - page 34

    Screen Setup Menu 9300 Series User ’s Guide Page 34 Chapter 2 - Using The Front P anel Display Mode There are two display modes: P ROGRAMMABLE M ODE and F IXED M ODE . The default is programmable mode, which provides ei ght d ata display screens which can be configured to meet your requirements (s ee “Custom Front Panel Displays”). Fixed M o ...

  • Siemens 9300 - page 35

    9300 Series User’s Gui de Nameplate Info Menu Chapter 2 - Using The Front P anel Page 3 5 Nameplate Info Menu Select N AMEPLATE I NFO to displ ay informa tion abou t the various op tions of the device, such as: Security Menu When any changes are made to the meter via the front panel, the meter prompts for a user password. Th e password preven ts ...

  • Siemens 9300 - page 36

    Diagnostic Menu 9300 Series Us er ’s Guide Page 36 Chapter 2 - Using The Front P anel Harmonics Diagnostics Select H ARMONICS from the Diagnostics menu to view per-phase voltage and current harmonics to the 31st harmonic. The following is an example of a harmonics display: Press and hold the up and down buttons to move the cursor to the harmonic ...

  • Siemens 9300 - page 37

    9300 Series User’s Gui de Di agnostic Menu Chapter 2 - Using The Front P anel Page 3 7  The Ethernet Connectio n diagnostic screen displays text similar to what you see in the table below - each label appears with a value next to it. The table explains the meaning of each possible value. I/O Diagnostics The I/O diagnostics mode verifies the op ...

  • Siemens 9300 - page 38

    Custom Front P anel Displays 9300 Series User’s Guide Page 38 Chapter 2 - Using The Front P anel Custom Front Panel Displays Custom front panel displays can be crea ted showing any data the meter measures or calculates. Each display screen can be configured to display a ny measurements you require. You can also adjust the size of the characters i ...

  • Siemens 9300 - page 39

    9300 Series User’s Gui de Before Customizing the Front P anel Chapter 2 - Using The Front P anel Page 3 9 Links to a Display module can be made us ing Designer or the front panel. Each Display module has one setup register, Display Type , which sets the number of parameters that the display screen will show. The Display Typ e setup register has f ...

  • Siemens 9300 - page 40

    Before Customizing the Front P anel 9300 Series User’s Guide Page 40 Chapter 2 - Using The Front P anel ...

  • Siemens 9300 - page 41

    3 Default Meter Functionality The information provided in this chapter corresponds to factory-configured ACCESS devices. If you have a custom framework, some of the default settings may differ for your configuration. In This Chapter  Default Meter Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Basic Setu ...

  • Siemens 9300 - page 42

    Default Meter Functionality 9300 Series User’s Guide Page 42 Chap ter 3 - Default Meter Functionality Default Meter Functionality To learn more about the ION modules in your meter, refer to the ION Device Templates at www.pwrm.com. ION Device T emplates list all of the ION modules available in the current version of your meter, and the total numb ...

  • Siemens 9300 - page 43

    9300 Series User’s Gui de Communications Setup Chapter 3 - Defaul t Meter Functionality Page 4 3 Communications Setup Communication settings are typically configured when the ACCESS meter is initially put into service. Each communica t ions port on a meter is controlled by a single Communications module. The mo dules’ setup register s define th ...

  • Siemens 9300 - page 44

    P ower Quality Setup (9350) 9300 Series User’s Guide Page 44 Chap ter 3 - Default Meter Functionality 3 MeterM@il se ttings for 9330 and 9350 meters. Modem Initialization String The setup register labeled ModemInit is available for 9330 and 9350 meters with internal modems, and de fines the initiali zation string for the internal modem (by defaul ...

  • Siemens 9300 - page 45

    9300 Series User’s Gui de Data Log ging Setup Chapter 3 - Defaul t Meter Functionality Page 4 5 Sag/Swell Module Settings 1 The primary p ower system vo ltage is some times diffe ren t than the PT Primary setup reg ister value; i.e. when the PT Primary is used to indicate winding ratio rath er than primary voltage. Nom Volt s must be set to enabl ...

  • Siemens 9300 - page 46

    Data Logging Setup 9300 Series User’s Guide Page 46 Chap ter 3 - Default Meter Functionality Procedures for changing the logging depth and the frequency of logging are discussed in the following secti ons: “Changing the Frequency of Logging ” on page 47 and “Changing the Log Depths” on page 47. Default Logging Configuration The standard c ...

  • Siemens 9300 - page 47

    9300 Series User’s Gui de Data Log ging Setup Chapter 3 - Defaul t Meter Functionality Page 4 7 Sag/Swell Logging (9350 only) The meter logs the following output register values: Changing the Frequency of Logging The two Periodic Timer modules that co ntrol the frequency of different data recording are as follows:  “EgyDmd Log” T rg contro ...

  • Siemens 9300 - page 48

    Setpoint Configurati on (9330 and 9350) 9300 Series User’s Guide Page 48 Chap ter 3 - Default Meter Functionality Setpoint Configuration (9330 and 9350) Setpoints provide extensive control, secon d ary protection and analysis capabilities by allowing you to initiate an action in response to a specific cond ition. Some possible applications for th ...

  • Siemens 9300 - page 49

    9300 Series User’s Gui de Meter Clock Configuration Chapter 3 - Defaul t Meter Functionality Page 4 9 Fine T uning Over Condition Monitoring If you want to fine-tune over conditi on monitoring, the only setup registe rs you should change are SusUntlON and SusUntlOFF . SusUntlON de termines how long the modules wait after an over conditio n is det ...

  • Siemens 9300 - page 50

    Display Configuration 9300 Series User ’s Guide Page 50 Chap ter 3 - Default Meter Functionality Display Configuration The meter’s front panel disp lay is controlled by two types of ION modules: the Display Options module and Display mo dules. Display module s determine the form and content of each display screen, and the Display Options module ...

  • Siemens 9300 - page 51

    9300 Series User’s Gui de Display Configuration Chapter 3 - Defaul t Meter Functionality Page 5 1 Display Module Settings The Display module’s setup reg ister s determine the format that the Source data will take on the front panel display. Depe nding on the display screen type, you can use up to four Source links to a single Display modu le. D ...

  • Siemens 9300 - page 52

    Demand Setup 9300 Series User’s Guide Page 52 Chap ter 3 - Default Meter Functionality Demand Setup The demand modules (both Thermal De mand modules and Sliding Window Demand modules) are configured to ca lculate the aver age current demand and kW, kVAR and kVA demand. The setup registers in the demand modules define time intervals for d emand ca ...

  • Siemens 9300 - page 53

    9300 Series User’s Gui de Fac tor y In fo rma ti on Chapter 3 - Defaul t Meter Functionality Page 5 3 Factory Information The Factory module displays firmware ve rsion, serial number and other device information in read-only setup registers (r ead-only registers can be viewed but not changed). Factor y Module Settings The device information provi ...

  • Siemens 9300 - page 54

    Third P arty Pr otocols 9300 Series User’s Guide Page 54 Chap ter 3 - Default Meter Functionality Third Party Protocols Modbus and DNP modules are f actory configured and do not r equire basic configuration changes. Changing the fact ory configuration is an advanced setup procedure that requires an understand ing of the protocol, as well as an un ...

  • Siemens 9300 - page 55

    9300 Series User’s Gui de Using the Modbus RTU Protocol Chapter 3 - Defaul t Meter Functionality Page 5 5 Factor y Modbus Configuration for the 9300 Series Meter The 9300 Series meter makes data availabl e to Modbus devices using four Modbus Slave modules. These modules are linked to other modules in the meter that provide energy, power and deman ...

  • Siemens 9300 - page 56

    Using the Modbus RTU Protocol 9300 Series User’s Guide Page 56 Chap ter 3 - Default Meter Functionality Modbus Slave Module #1 Modbus Slave Module #2 Modbus Slave Module #3 Modbus Slave Module #4 Modbus Slave Module Parameter Mapping The following tables show which measuremen ts are provided by each of the four Modbus Slave modules. The source fo ...

  • Siemens 9300 - page 57

    9300 Series User’s Gui de Using the Modbus RTU Protocol Chapter 3 - Defaul t Meter Functionality Page 5 7 Modbus Slave Module #2 Links Modbus Slave Module #3 Links Average L-L V oltage Vll avg P ower Meter Modbus Slave #1 – Source Input #8 40018 Phase A Current I a P ower Meter Modbus Slave #1 – Source Input #9 40019 Phase B Current I b P owe ...

  • Siemens 9300 - page 58

    Using the Modbus RTU Protocol 9300 Series User’s Guide Page 58 Chap ter 3 - Default Meter Functionality Modbus Slave Module #4 Links Impor ting Data using M odbus R TU It is possible to bring data into the 93 00 Series meter using Modbus. Various ION registers can be written by Modbus Mas ter devices by correlating the Mo dbus register number wit ...

  • Siemens 9300 - page 59

    9300 Series User’s Gui de Using the Mod bus/T CP Protocol Chapter 3 - Defaul t Meter Functionality Page 5 9 You can use the Modbus RTU protocol to wr ite values into ION external numeric, pulse and Boolean modules, allowing yo u to enable, disable and reset meter functions. You can also use Modbus to chan ge setup register values in various ION m ...

  • Siemens 9300 - page 60

    Using the DNP 3.0 Protocol 9300 Series User ’s Guide Page 60 Chap ter 3 - Default Meter Functionality Using the DNP 3.0 Protocol The Distributed Network Protoc ol Version 3.00 (DNP 3.0) is an open protocol used in the electric utility industry for co mmunications and interoperability among substation computers, RTUs, IEDs, and Master Stations. Th ...

  • Siemens 9300 - page 61

    9300 Series User’s Gui de Using the DNP 3.0 Protocol Chapter 3 - Defaul t Meter Functionality Page 6 1 If your DNP network requires data in a fo rmat different than that provided by the factory DNP configuration, you can edit the setup registers in the DNP Slave Export modules and the DNP Options modu le. Do not make any cha nges to the DNP Optio ...

  • Siemens 9300 - page 62

    Using the DNP 3.0 Protocol 9300 Series User ’s Guide Page 62 Chap ter 3 - Default Meter Functionality DNP Options Module Settings The DNP Options module provides global se ttings that affect all DNP Slave Export and DNP Slave Import modules. The default se ttings in this module are shown in the following table. Impor ting Data using DNP 3.0 Data ...

  • Siemens 9300 - page 63

    9300 Series User’s Gui de Using the Profibus Protocol Chapter 3 - Defaul t Meter Functionality Page 6 3 Using the Profibus Protocol Those 9300 meters ordered with the optional Profibus port are suitable to provide many real-time power system measuremen ts to a Profibus network. Profibus Master devices connected to the 9300-Prof ibus can access th ...

  • Siemens 9300 - page 64

    Using the P rofibus Prot ocol 9300 Series User’s Guide Page 64 Chap ter 3 - Default Meter Functionality Source ION Module Measurement ION Label Source ION Module Measurement ION Label P o wer Meter Volts line to neutral A Vln a P ower Mete r V olts line to l ine AB Vll ab P ower M eter Volts line to neutral B Vln b Power Meter V olts line to l in ...

  • Siemens 9300 - page 65

    9300 Series User’s Gui de Using the Profibus Protocol Chapter 3 - Defaul t Meter Functionality Page 6 5 Source ION Module Measurement ION Label Source ION Module Measu rement ION Label Integrator #3 kW hour T otal kWh tot I nte grator #1 kW hour Import kWh imp Integrator #7 kVAR hour T otal kV ARh to t Integrator #2 kW hour Export kWh exp Integra ...

  • Siemens 9300 - page 66

    Restoring the Factory Configuration 9300 Series User’s Guide Page 66 Chap ter 3 - Default Meter Functionality Restoring the Factory Configuration If you have made changes to the default functionality and want to return to the factory configuration, you can e-initialize the factory configuration in the meter through Designer. The basic setup of th ...

  • Siemens 9300 - page 67

    9300 Series User’s Gui de Restoring the Factory Configuration Chapter 3 - Defaul t Meter Functionality Page 6 7 10. Click the P o wer Meter shortcut i n the Basic Configuration area to select it. Once selected, click Reset in the Designer toolbar, or select Reset from the Edit menu. This reverts the Pow e r Meter to the settings it h ad before yo ...

  • Siemens 9300 - page 68

    Restoring the Factory Configuration 9300 Series User’s Guide Page 68 Chap ter 3 - Default Meter Functionality ...

  • Siemens 9300 - page 69

    4 Using ACCESS Software ACCESS software encompasses a vari ety of programs that enhance the functionality and u sability of your ACCESS devices. AC CESS software can collect data via serial, wireless, modem, or Ethernet links, so you can manage a si ngle site or global network of devices. WinPM.Net is a software suit wi th applications for displayi ...

  • Siemens 9300 - page 70

    WinPM.Net Software 9300 Series User’s Guide Page 70 Chapter 4 - Using A CCESS Software WinPM.Net Software WinPM.Net software offers control capabi litie s and comprehensive power quality and reliability analysis. It is a powerful software suite that can process, analyze, store, and share data across your entire enterprise. The fully networked cli ...

  • Siemens 9300 - page 71

    9300 Series User’s Gui de WinPM.Net: Management Console Chapter 4 - Using ACCESS Software Page 71 WinPM.Net: Management Console The Management Console is responsible for building your network. You build your power-monitoring n etwork to reflect the way your physical communications network is wired so that WinPM.Net software can communicate with y ...

  • Siemens 9300 - page 72

    WinPM.Net: Management Console 9300 Series User’s Guide Page 72 Chapter 4 - Using A CCESS Software Sites A site in an WinPM.Net system contains on e or more intelligent devices that share a common communications link. There are three d ifferent types of sites, based on the type of communications medium each uses. The site type s are as follows: ? ...

  • Siemens 9300 - page 73

    9300 Series User’s Gui de Configuring Co mmunications Chapter 4 - Using ACCESS Software Page 73 Configuring Communications Before you can talk to the devices on your network, you need to configure communications within the Management Cons ole. Essentially, this mea ns adding one or more sites and then adding the de vices associated with each site ...

  • Siemens 9300 - page 74

    Configu ring Communica tions 9300 Series User’s Guide Page 74 Chapter 4 - Using A CCESS Software  For an Ethernet Gateway Site , you specify the Ethernet device acting as the gatew ay and the TCP/IP port to which the serial device, or network of serial devices, is connected. Before you can add an Ethernet Gatew ay Site, an Ethernet Device must ...

  • Siemens 9300 - page 75

    9300 Series User’s Gui de WinPM.Net: Vista Chapter 4 - Using ACCESS Software Page 75 WinPM.Net: Vista Vista is a display, anal ysis, and control application. It is the main user interface to the WinPM.Net syst em. Vista presents a graphical view of you r power system, allowing you to view real-time data from power meters or historical data from t ...

  • Siemens 9300 - page 76

    Displaying Data with Vista 9300 Series User’s Guide Page 76 Chapter 4 - Using A CCESS Software This opens a new window showing all of the installed meters. Each meter appears with an icon that represents i ts type and a label reflecting the name you configured in the Management Con sole. 3. Click a meter icon to open its main default diagram. Eac ...

  • Siemens 9300 - page 77

    9300 Series User’s Gui de Displaying Data with Vista Chapter 4 - Using ACCESS Software Page 77 Vista Diagram Elements Each Vista diagram shows the name of th e meter, the time on the meter’s clock, and the type of meter. The main diagrams also provide buttons that let you jump to other diagrams. Jump to another diagram by clicking any of the bu ...

  • Siemens 9300 - page 78

    Displaying Data with Vista 9300 Series User’s Guide Page 78 Chapter 4 - Using A CCESS Software Summary of Data Provided in Vista The standard set of Vista diagrams includ ed with WinPM.Net display a variety of data measured by the factory-configured meter. Some of the diagrams include grouping windows that display addi tional data. The following ...

  • Siemens 9300 - page 79

    9300 Series User’s Gui de Displaying Data with Vista Chapter 4 - Using ACCESS Software Page 79 The harmonics measurement display show s total harmonic distortion for each phase of voltage and current. Links to harmonics min/max and harmonics trending displays are provided, and a c ontrol object is included for enabling/ disabling harmonics l oggi ...

  • Siemens 9300 - page 80

    Displaying Data with Vista 9300 Series User’s Guide Page 80 Chapter 4 - Using A CCESS Software Energy & Demand Calculations The Energy & Demand diagram shows the real-tim e sliding window demand for kW, kVA and kVAR, and the real-time en ergy values kWh net, kVARh net and kVAh. Peak demand is displayed for kW, kVAR and kVA, and a link to ...

  • Siemens 9300 - page 81

    9300 Series User’s Gui de Customizing the Vista Interface Chapter 4 - Using ACCESS Software Page 81 Customizing the Vista Interface Standard Vista diagrams show much of th e data tha t the factory-configured meter measures and calculates. However, the factory-configured mete r can provide additional data that is not pr esented by default with the ...

  • Siemens 9300 - page 82

    Customizing the Vista Interface 9300 Series User’s Guide Page 82 Chapter 4 - Using A CCESS Software Custom Appearance of a User Diagram You can customize the appearance and configuration of any window within a user diagram. You can alter a window's font or background color, or configure window properties such as background image, re al-t ime ...

  • Siemens 9300 - page 83

    9300 Series User’s Gui de WinPM.Net: Designer Chapter 4 - Using ACCESS Software Page 83 WinPM.Net: Designer Designer is an application for adva nc ed users who know the nature of ION architecture, specifical ly the nature of frameworks. A framework is a number of ION modules arranged (linked) to perform a specific function or number of functions. ...

  • Siemens 9300 - page 84

    Basics of ION Architecture 9300 Series User’s Guide Page 84 Chapter 4 - Using A CCESS Software ION Modules The ION module is the basic building block of the AC CESS device’s operating software. A module can be considered as a “function box”: it receives data f rom its inputs, makes decisions based on the settings in its setup registers, and ...

  • Siemens 9300 - page 85

    9300 Series User’s Gui de Basics of ION Architecture Chapter 4 - Using ACCESS Software Page 85 Sequence of ION Module Execution ION modules always execute in the order of the data flow (in the exa mple below, from 1 to 4). This logical execution orde r is maintained even if you created the framework from back to front. ION modules may execute sim ...

  • Siemens 9300 - page 86

    Basics of ION Architecture 9300 Series User’s Guide Page 86 Chapter 4 - Using A CCESS Software ION Configuration Chan ges and Module Security When you make configuration changes to an ACCESS device you are either changing a value in a module’s setup regi ster (b asic configuration) or you are changing the linkage between two or mo re module s ( ...

  • Siemens 9300 - page 87

    9300 Series User’s Gui de Designer ’s Main Configura tion Screen Chapter 4 - Using ACCESS Software Page 87 Designer’s Main Configuration Screen If the software has been properly configured, the main screen of the meter’s node diagram appears each time that you open a meter in Designer. If the ACCESS software has not yet been configured, ref ...

  • Siemens 9300 - page 88

    Viewing Rea l-time Data in Desi gner 9300 Series User’s Guide Page 88 Chapter 4 - Using A CCESS Software Viewing Real-time Data in Designer You can view the real-time values of output registers in Design er. This is useful when you are linking these outputs to other module s. However, it is recommended that you use Vista as your main data display ...

  • Siemens 9300 - page 89

    9300 Series User’s Gui de Changing Setup Reg isters with Designer Chapter 4 - Using ACCESS Software Page 89 T o configure IO N module setup registers with Designer: 1. Right-click near the module’s cent er. The ION Module Setup dialog box appears, showing a list of setup re gisters available for configuration: 2. Highlight the Setup register yo ...

  • Siemens 9300 - page 90

    Customizing Frameworks in D esigner 9300 Series User’s Guide Page 90 Chapter 4 - Using A CCESS Software Use the Interval Format area if the setting you are changing requires intervals. Use the Date/Time Format area if the setting you are changing requires specific dates (such as those needed used in the Clock module). Click OK when you have the d ...

  • Siemens 9300 - page 91

    9300 Series User’s Gui de Customizing Frameworks in D esigner Chapter 4 - Using ACCESS Software Page 91 Creating New Modules To add a module, locate its icon in the Designer toolbox, press and hold the left mouse button over the icon, and drag it onto the node diagram. Once you release the mouse button, the module becomes part of the diagram and ...

  • Siemens 9300 - page 92

    Customizing Frameworks in D esigner 9300 Series User’s Guide Page 92 Chapter 4 - Using A CCESS Software You can link modules that reside on differ ent nodes, provided that you are linking between software nodes, or from a mete r to a softwar e node. You cannot link modules between meters. The following se ction describes how to link modules that ...

  • Siemens 9300 - page 93

    9300 Series User’s Gui de Customizing Frameworks in D esigner Chapter 4 - Using ACCESS Software Page 93 The linking procedure described in the preceding steps can also be performed in reverse order. You can sele ct a module’s input first and then link it to another module’s output register. Editing Existing Frameworks If you are comfortable w ...

  • Siemens 9300 - page 94

    WinPM.Net: Reporter 9300 Series User’s Guide Page 94 Chapter 4 - Using A CCESS Software WinPM.Net: Reporter Reporter is a database reporting applicat ion. It lets you define, generate, and manage comprehensive reports based on the data in your database. Reporter retrieves data from the Relational Data base Management System (RDBMS), and processes ...

  • Siemens 9300 - page 95

    9300 Series User’s Gui de Pre - co nf igu re d R epo rt s Chapter 4 - Using ACCESS Software Page 95 Energy and Demand This report is designed to generate an d display details about energy consumption and peak demand levels over a given time period. It uses a Time of Use Schedule (TOU) to reference the metered data agai ns t an energy provider’s ...

  • Siemens 9300 - page 96

    Report Creation and Generation 9300 Series User’s Guide Page 96 Chapter 4 - Using A CCESS Software Report Creation and Generation These steps are used for creating all report t y p e s . B e s u r e t o k n o w w h i c h l o g ( s ) y o u use for the report you are creating. N OTE If you are creating an Energy and Demand report, complete the step ...

  • Siemens 9300 - page 97

    9300 Series User’s Gui de Report Creation and Gene ration Chapter 4 - Using ACCESS Software Page 97 Creating a T ime of Use Schedule 1. Start Reporter and select the TOU tab. 2. Se lect the Sample file, then click copy to duplicate it. All of the pre-configured samples include some basic programing to simplify customization. It is generally best ...

  • Siemens 9300 - page 98

    ION Setup Software 9300 Series User’s Guide Page 98 Chapter 4 - Using A CCESS Software ION Setup Software ION Setup is a software solution that allows basic configuration and control capabilities for your power monitoring de vices. ION Setup can also display real- time and diagnostic data for your networked devices. When starting ION Setup, you h ...

  • Siemens 9300 - page 99

    9300 Series User’s Gui de Configuring Co mmunications Chapter 4 - Using ACCESS Software Page 99 Sites, Groups, and Meters You can create a network of items within ION Setup so that the next time you want to upgrade a meter’s firmware or make any configuration changes, the meter is easy to find and your communication setup is ready. Sites refers ...

  • Siemens 9300 - page 100

    Configu ring Communica tions 9300 Series User’s Guide Page 100 Chapter 4 - Using A CCESS Software 3. Click OK. A dialog box for the appropriate item appear s. Depending on the item, there may be multiple tabs each with numerous options for configuration:  When you add a new site, the dialog displays three tabs: General , Timings, and P olling. ...

  • Siemens 9300 - page 101

    9300 Series User’s Gui de Ba sic Meter Configura tion Chapter 4 - Using ACCESS Software Page 101 Basic Meter Configuration The Setup Assistant is a user interface that contains relevant instructions to help guide you through common setup requirem ents for your ACCESS meter. After you have added a device to ION Setup in network mode, or connected ...

  • Siemens 9300 - page 102

    Displaying Data with ION Setup 9300 Series User’s Guide Page 102 Chapter 4 - Using A CCESS Software 2. Highlight the setup register you w ant to edit in the re gister window. 3. Click the Edit button. (A window may appear, asking for the me ter’s password. This only occurs for meter’s with advanced meter security . Type the meter’s password ...

  • Siemens 9300 - page 103

    9300 Series User’s Gui de Displaying Data with ION Setup Chapter 4 - Using ACCESS Software Page 103 Displaying diagnostics data 1. Select a site or device icon from the left pane. 2. Select Diagnostics from the Tools menu (or click on the toolbar). The Communication tab displays information about the meter’s communication status, message inform ...

  • Siemens 9300 - page 104

    Displaying Data with ION Setup 9300 Series User’s Guide Page 104 Chapter 4 - Using A CCESS Software ...

  • Siemens 9300 - page 105

    5 Features and Applications The 9300 Series meters offer a range of capabilities fo r enterprise energy management applications such as f eeder monitoring and submetering. Comprehensive analog and digital I/O, multipl e communication ports, industry- standard protocols, and precision time synchronization compliment the mete rs’ ability to integra ...

  • Siemens 9300 - page 106

    Communications 9300 Series User ’s Guide Page 106 Chapter 5 - Features and Applications Communications This section describes the meter communic ations media types and communications applications. The diagram below shows the 9300 Seri es meter communication ports with a brief description of how each port is used. The 9300 Series meter has numerou ...

  • Siemens 9300 - page 107

    9300 Series User’s Gui de RS -485 Connections Chapter 5 - Features and Applications Page 107 RS-485 Connections Refer to the “Hardware Reference” chapter for the 9300 Series RS-485 specifications. The communi ca tion card is designed with optical coupling that provides full isolation between the RS -485 communication lines and the meter inter ...

  • Siemens 9300 - page 108

    Optical P ort Connections 9300 Series User’s Guide Page 108 Chapter 5 - Features and Applications  Install a ¼ W att termination resistor (RT) betw een the (+) and (-) terminals of the device at each end point of a straight-line bus. The resistor should match the nominal impedance of the RS-485 cabl e (typically 120 ohms – consult the manuf ...

  • Siemens 9300 - page 109

    9300 Series User’s Gui de Optical P ort Connections Chapter 5 - Features and Applications Page 109 Meter Setup for Optical Port Communications To communicate real-time measurements through the infrared port, you must configure the Infrared Comm communications module. The Baud Rate, Unit ID, and Protocol setup registers must properly match your sy ...

  • Siemens 9300 - page 110

    Ethernet Connections 9300 Series User’s Guide Page 110 Chapter 5 - Features and Applications Optical Port Setup for Energy Pulsing To configure the optical (infrared) port for energy pulsing, you must set the Infrared Comm communications module Protocol register to I NFRARED I/O. Use the meter’s front panel or ACCESS software to set the IR puls ...

  • Siemens 9300 - page 111

    9300 Series User’s Gui de Ethernet Connections Chapter 5 - Features and Applications Page 111 Meter Setup for Ethernet Communications To enable communications throug h the mete r’s Ethernet port, you must configure the Ethernet communications module. The IP Address , Subnet Mask, Gateway, SMTP Server and SMTP Connec tion Timeout setup registers ...

  • Siemens 9300 - page 112

    Ethernet Connections 9300 Series User’s Guide Page 112 Chapter 5 - Features and Applications The EtherGate Protocol EtherGate is a powerful communications tool that lets you communicate to a meter and through a meter simultaneously. When a meter installed on the Ethernet network has EtherGate enabled, a master device (such as a workstation runnin ...

  • Siemens 9300 - page 113

    9300 Series User’s Gui de Internal Modem Connections Chapter 5 - Features and Applications Page 113 Internal Modem Connections This option is only available on the 9330 and 9350 meters. Refer to the “Hardware Reference” chapter for inte rnal modem specifications. Connection to the internal modem is made via the RJ-11 jack, or two captured wir ...

  • Siemens 9300 - page 114

    Internal Modem Connections 9300 Series User’s Guide Page 114 Chapter 5 - Features and Applications Modem Initialization String Examples The modem supports various commands in th e initialization string. The examples below are for use when the modem is used to receive incoming calls. 1. Enter the following string t o force th e modem to use the 12 ...

  • Siemens 9300 - page 115

    9300 Series User’s Gui de Internal Modem Connections Chapter 5 - Features and Applications Page 115 Configuring the Comm 1 Communications Module in Designer Launch Designer, and conf igure the Comm 1 communications module Baud Rat e, Unit ID, and Protocol setup registers to match your communications system . Configure the initialization string f ...

  • Siemens 9300 - page 116

    Profibus Conn ections (9300) 9300 Series User’s Guide Page 116 Chapter 5 - Features and Applications Wire an RS-485 connection between one or more meters and COM 1 of the 9330 or 9350 meter according to the wiring guidelines presented in the Installation and Basic Setup Guide . Refer to the Mode mGate te chnical note for complete details on confi ...

  • Siemens 9300 - page 117

    9300 Series User’s Gui de Internet Connectivity Chapter 5 - Features and Applications Page 117 Internet Connectivity ACCESS meters provide Internet connectivi ty so you can receive meter emails, view realtime data, and configure your system through a web browser from anywhere in the world. Your ACCESS meter provides the following internet con nec ...

  • Siemens 9300 - page 118

    We b R e a c h 9300 Series User ’s Guide Page 118 Chapter 5 - Features and Applications  set up your network for the W ebMeter feature  enable/disable web browser configuratio n of the meter (for 9300 Series meters, web browser configuration of th e meter is enabled by default) ACCESS MeterM@il Feature (9330 and 9350) The MeterM@il feature ...

  • Siemens 9300 - page 119

    9300 Series User’s Gui de Te l n e t a n d H y p e r t e r m i n a l Chapter 5 - Features and Applications Page 119 Refer to the technical note Telnet and HyperTerminal Ac cess for the appropriate application’s menu options and connection instructions. ...

  • Siemens 9300 - page 120

    Digital and Analog I/O 9300 Series User’s Guide Page 120 Chapter 5 - Features and Applications Digital and Analog I/O Digital and analog I/O ports on ION meters let you brin g a variety of data into a common system, thereby simplifying data gathering. The 9300 Series offers numerous digital and an alog I/O combinations. All series meters provide ...

  • Siemens 9300 - page 121

    9300 Series User’s Gui de Specifying a Port In an ION Module Chapter 5 - Features and Applications Page 121 N OTE The IR LED capabi lity is not av ailable unt il you set the IR1 P ROTOCOL register in the IR Comm module to I NFRARED I/O. The following table describes the ports th at can be configured (in the Digital Output, Pulser, Digital Input, ...

  • Siemens 9300 - page 122

    Using the Onboard Dig ital Outputs 9300 Series User’s Guide Page 122 Chapter 5 - Features and Applications Using the Onboard Digital Outputs The four digital output ports are locate d on the rear of the meter . ION Digital Output, Calibration Pulser, or Pulser mo dules control the function of the digital output ports. These modules define the ch ...

  • Siemens 9300 - page 123

    9300 Series User’s Gui de Using the Onboard Digital Outputs Chapter 5 - Features and Applications Page 123 Energy Pulsing Five Calibration Pulser module s are pr econfigured at the factory for energy pulsing applications. One of these modules is programmed to send kWh pulses to the LED on the back of the meter. The remaining four (configured for ...

  • Siemens 9300 - page 124

    Using the Onboard Dig ital Inputs 9300 Series User’s Guide Page 124 Chapter 5 - Features and Applications Using the Onboard Digital Inputs The 9330 and the 9350 meters’ four onboard digital (status) inpu ts can be used for monitoring external contacts or pulse counting applicat ions. These inputs can be used for dry contact sensing, but they ca ...

  • Siemens 9300 - page 125

    9300 Series User’s Gui de Using the Optional Analog Outputs Chapter 5 - Features and Applications Page 125 The settings for Analog Input module s are as follows: 1 An arbitrary input v alue can be treated as the Zero Scale (i.e. a 4-20mA inpu t is capable of generating a 0 to X output ). Using the Optional Analog Outputs The four optional Analog ...

  • Siemens 9300 - page 126

    Data and Event Logging 9300 Series Us er ’s Guide Page 126 Chapter 5 - Features and Applications Data and Event Logging The meter includes powerful data logging (9330 and 93 50 meters only) and event recording capabilities. Data and event logs recorded by the meter are prioritized and stored onboard. Data is retrieved peri odically by the WinPM.N ...

  • Siemens 9300 - page 127

    9300 Series User’s Gui de Event Logging Chapter 5 - Features and Applications Page 127 Event Logging Events produced by the various ION mo dules in the meter are pr ioritized and grouped to facilitate custom loggi ng. Each event has a priority group number assigned to it, based on its type and severity. ION Event Priority Groups Some event groups ...

  • Siemens 9300 - page 128

    Logg ing and Recording Capacity 9300 Series User’s Guide Page 128 Chapter 5 - Features and Applications Logging and Recording Capacity Data and Event Logging (9330 and 9350) The standard memory capa city for both me ters is 304 kilobytes of non-volatile memory. This is enough memory to log 16 parameters ever y 15 minutes for 30 days. However, by ...

  • Siemens 9300 - page 129

    9300 Series User’s Gui de Time Synchronization Chapter 5 - Features and Applications Page 129 Time Synchronization Time synchronization lets yo u synchronize the internal clocks of all networked meters and devices. Once synchronized, al l data logs have timestamps that are relative to a uniform time base . This al lows you to achieve precise sequ ...

  • Siemens 9300 - page 130

    Meter Security 9300 Series User’s Guide Page 130 Chapter 5 - Features and Applications Meter Security The meter’s security settings allow you to configure the meter through the front panel, with ACCESS software, or with the optional embedded web server. Standard meter security Anytime you make configuration changes to your meter, either through ...

  • Siemens 9300 - page 131

    9300 Series User’s Gui de Residual Current Ca lculation (I4) Chapter 5 - Features and Applications Page 131 Changing the Meter Password 1. Select S ECURITY from the Setup menu. 2. Y ou will see that the screen displays 00000. Enter the current password. If y ou have not previously changed y our password, the default is 00000. 3. Choose M ODIFY P ...

  • Siemens 9300 - page 132

    Alerting 9300 Series User’s Guide Page 132 Chapter 5 - Features and Applications Alerting The purpose of an ION alert system is to send an email or to contact a modem, fax, pager, or software in the event of a user -specified condition. These conditions can be changes in relays or p ower quality pr oblems including sur ges, sags, swells and outag ...

  • Siemens 9300 - page 133

    9300 Series User’s Gui de Alerting ION Software via the Alarm Server Chapter 5 - Features and Applications Page 133 Remote Site Event Notification The Alarm Server uses a series of command line arguments to specify the actions it takes when a priority event is report ed. These commands must be entered on the computer that is running the Alarm Ser ...

  • Siemens 9300 - page 134

    Alerting via an Alphanumeric P ag er 9300 Series User’s Guide Page 134 Chapter 5 - Features and Applications Alerting via an Alphanumeric Pager N OTE For detailed information ab out building a framework for alerting via an alphanumer ic pager, refer to the Alert module description in the online ION Programmer’s Refer ence. If an alphanumeric pa ...

  • Siemens 9300 - page 135

    9300 Series User’s Gui de Alerting via Email ( 9330 and 9350) Chapter 5 - Features and Applications Page 135 N OTE In the following des tination-sett ing example: 1-250-555- 666,,,,,999#, th e pager number is 1-250-555- 6 6 6 a n d t he m e s s a g e s tr i n g t h a t d i s pl a y s o n t h e pa g e r i s 9 99 . Y ou m a y n ee d t o i n s er t ...

  • Siemens 9300 - page 136

    Alerting via Email (93 30 and 9350) 9300 Series User’s Guide Page 136 Chapter 5 - Features and Applications ...

  • Siemens 9300 - page 137

    6 Revenue Metering This chapter provides an overview of the 9300 Series revenue meters. In This Chapter  9300 Series Revenue Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 36 Revenue Meter Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Revenue Meter Options . ...

  • Siemens 9300 - page 138

    9300 Series Revenue Meters 9300 Series User ’s Guide Page 138 Chapter 6 - Revenue Metering 9300 Series Revenue Meters The fundamental functions of a revenue me ter are to provide m easuremen ts that are within industry-accepted limits for accuracy over a defined range of operating conditions and to provide adequate prot ection against unauthorize ...

  • Siemens 9300 - page 139

    9300 Series User’s Gui de Security Mechanisms Chapter 6 - Revenue Metering Page 139 The revenue meter’s energy output register labels follow the revenue meteri ng terminology; the ene rgy labels for kVAh , kVARh and kWh are different from the non-revenue devices as follows: For example, the meter’s output registe r kVARh tot will be kVARh del ...

  • Siemens 9300 - page 140

    Security Mechanisms 9300 Series User’s Guide Page 140 Chapter 6 - Revenue Metering Anti-Tamper Seals The revenue meter incorporates one or tw o sealing cans throug h w hich traditional lead/wire seals can be inserted. When ut ilized, these lead/wire seals ef fectively prevent unauthorized personne l from gaining access to meter internals. These s ...

  • Siemens 9300 - page 141

    9300 Series User’s Gui de Configuring the Revenue Meter Chapter 6 - Revenue Metering Page 141 Configuring the Revenue Meter When enabled, the revenue mete r secu rity system prevents unauthorized alteration of revenue-related quantities. By default, all revenue meters are shipped from the factory with the secu rity system enabled. You can tempora ...

  • Siemens 9300 - page 142

    Configuring the Revenue Meter 9300 Series Us er ’s Guide Page 142 Chapter 6 - Revenue Metering 5. Place the jumper block on to the J1 two-pin header (this disables the hardware based security). Slide the rear plate back into the device and replace the four screws onto the real panel. Apply Control power to the revenue meter . 6. Configure the met ...

  • Siemens 9300 - page 143

    7 Hardware Reference This chapter is intended to provide quick, at-a-glance, technical specifications for the more common hardware features of the 9300 Series meter. Not all specifications are included. Al l specificati ons are subject to change without notice. For the most recent information see the 9300 Series Meter Datasheet. In This Chapter  ...

  • Siemens 9300 - page 144

    Standard Model 9300 Series User’s Guide Page 144 Chapter 7 - Hardware Reference Standard Model S1 S2 S3 S4 C RS-485 bus Dry Contacts / Switches Po r t s 31 22 21 12 11 V 1 V 2 V 3 L2 N G L D3 D2 D1 C S H S H + + - - D4 COM2 COM1 DIGIT AL PORTS 32 V REF L1 + + + + SHORTING BL OCK or TEST BL OCK V+ (Max. 30V) Relays Current Inputs see page 1 56 Po ...

  • Siemens 9300 - page 145

    9300 Series User’s Gui de General Specif ications Chapter 7 - Hardware Reference Page 145 General Specifications Environmental Conditions To operate properly and effectively, envi ronmental conditions should fall within the guidelines li sted below. Environmental Condition A cceptable Range Operating T emperature Base Unit: -20°C (-4°F) to 60° ...

  • Siemens 9300 - page 146

    Unit Dimensions 9300 Series User’s Guide Page 146 Chapter 7 - Hardware Reference Unit Dimensions Basic Model Dimensions Ethernet Por t Location Internal Modem Por t Location 162.2 mm (6.39") 86 mm (3.39") 96mm (3.78") 96mm (3.78") 14.2 mm (0.56“) 16.8 mm (0.66“) 72.8 mm (2.87“) 57.4 mm (2.26“) 13.4 mm (0.53“) 33.8 mm ...

  • Siemens 9300 - page 147

    9300 Series User’s Gui de Communications Specifications Chapter 7 - Hardware Reference Page 147 Communications Specifications N OTE The Profibus meter option on the 93 00 meter do es not use a COM port. The following table indicates which COM ports are av ailable for each model. MDM COM1 COM2 22 AWG shielded, twisted pair Captured-wire connectors ...

  • Siemens 9300 - page 148

    COM1 Port 9300 Series User’s Guide Page 148 Chapter 7 - Hardware Reference Co-existing Hardware Options on the Meter These are the hardware ordering options that can (and cannot) exist together on the same meter. COM1 Port COM1 is used for RS-485 communications . If you have the ModemGate option on your meter, COM1 will au tomatically be set to M ...

  • Siemens 9300 - page 149

    9300 Series User’s Gui de COM 2 P ort Chapter 7 - Hardware Reference Page 149 Connections 1 The lengths of all (+ an d –) cable segments must be counted including those that connect devices to terminal blo cks. Terminal connections on the meter are marked as follows: COM 2 Port COM 2 is used for RS-485 communications and can be configured as an ...

  • Siemens 9300 - page 150

    COM 3 P ort 9300 Series User’s Guide Page 150 Chapter 7 - Hardware Reference COM 3 Port COM 3 is reserved for the optical (infrared) port. Infrared Connection Specifications for the optical port are as follows: 1 No physical con nection is requir ed to use the inf r ared port. Any device with an IRDA -compliant port that is positioned wit hin the ...

  • Siemens 9300 - page 151

    9300 Series User’s Gui de Prof ib us Port Chapter 7 - Hardware Reference Page 151 IP Ser vice Por ts Connect to the following TCP/IP Service Ports for communications over Etherne t. 1 EtherGate c ommunications are ava ilable only through COM2. This feature is available only on 9330 and 9350 meters . Profibus Port This option is offered exclusivel ...

  • Siemens 9300 - page 152

    Internal Modem 9300 Series User’s Guide Page 152 Chapter 7 - Hardware Reference Internal Modem Connection to the internal modem is made via the RJ-11 jack, or two captured wire connectors, located on the right side of the meter. Connect the meter to the telephone network with an FCC Part 68 compliant telephone cord (that has two male RJ-11 plugs) ...

  • Siemens 9300 - page 153

    9300 Series User’s Gui de LEDs Chapter 7 - Hardware Reference Page 153 LEDs All LEDs are found on the backplate of the meter, except the two Ethernet LEDs, which are found on the left side (if you are facing front of meter ). 1 If the L2 L ED does not bl ink once the mete r is installed, contact Siemen s Customer Se rvice. 2 One or b oth of the E ...

  • Siemens 9300 - page 154

    I/O Connections 930 0 Series User ’s Guide Page 154 Chapter 7 - Hardware Reference I/O Connections Use a wire size t hat is appropriate fo r your application and compli es with local electrical codes. Digital Outputs The meter provides four digita l output ports that are suit abl e for controlling external relays. The digital outputs can deliv er ...

  • Siemens 9300 - page 155

    9300 Series User’s Gui de I/O Connections Chapter 7 - Hardware Reference Page 155 Digital Inputs The meter supports four digital inputs. These can be used for monitoring the condition of a n external contac t, or for pulse counting applications. Analog Inputs Two types of analog input ports are available when you order a meter (refer to your mete ...

  • Siemens 9300 - page 156

    I/O Connections 930 0 Series User ’s Guide Page 156 Chapter 7 - Hardware Reference Analog Outputs This ordering option provides four analog outputs. Two varieties ar e available: N OTE There is on e common termina l for all of the Analog Out puts. Specification 0-20 mA (scalable to 4-20 mA) Option 0-1 mA Option Max. Load Drive Capability 500 Ω ...

  • Siemens 9300 - page 157

    9300 Series User’s Gui de Electrical Specifications Chapter 7 - Hardware Reference Page 157 Electrical Specifications Power Supply 1 If a standard display unit is used. Voltage Inputs C AUTION Phasing and polarity of the AC voltag e inputs and their relationship is critical to the correct operation of the unit. Specification Description Supply V ...

  • Siemens 9300 - page 158

    Electrical Specifications 9300 Series User’s Guide Page 158 Chapter 7 - Hardware Reference Potential Transformers C AUTION In cases where PTs are required, the secon daries should be fused. Current Inputs Current Transformers 1 The CT burden rating must exceed the combined bu rden of the meter, plus cabling, pl us any other connected devices. Spe ...

  • Siemens 9300 - page 159

    9300 Series User’s Gui de Options and Retrofits Chapter 7 - Hardware Reference Page 159 Options and Retrofits Terminal Cover This option ensures that the terminal stri ps on the meter’s base are not accessible after installation. D ANGER During normal operation of the meter, hazardous vo ltages are pres ent which can cause severe injury or deat ...

  • Siemens 9300 - page 160

    Remote Modular Displa y 9300 Series User’s Guide Page 160 Chapter 7 - Hardware Reference Remote Modular Display The remote modular display (RMD) connects to the TRAN m eter as shown: 1 Only use cable supplied by Siemens to connect the remote display unit. RMD Dimensions Switchboard Case The meter is available in the switch board-case ordering/ret ...

  • Siemens 9300 - page 161

    9300 Series User’s Gui de Switchboard Case Chapter 7 - Hardware Reference Page 161 Installation Instructions C AUTION Installation and maintenance of the switchboard meter should only be performed by qu alified personnel who have appropriate training and experience with high voltage and high current devices. If the switchboard case is included wi ...

  • Siemens 9300 - page 162

    Switchboard Ca se 9300 Series User’s Guide Page 162 Chapter 7 - Hardware Reference  For the standard option, the meter is powered up when the voltage inputs are applied in the next step. 9. Apply the current and voltage inputs:  For S1 style switchboard meters, insert the connection plu g into the slo t at the bottom of the meter .  For ...

  • Siemens 9300 - page 163

    9300 Series User’s Gui de Switchboard Case Chapter 7 - Hardware Reference Page 163 Unit Dimensions S1 Case FT21 Case 239mm (9.39") 176mm (6.91") 49mm (1.92") 56mm (2.19") 157mm (6.19") 172mm (6.77") 29mm (1.13") 206mm (8.1 1") 99mm (3.89") 75mm (2.96") 34mm (1.34") 142mm (5.59") 42mm (1. ...

  • Siemens 9300 - page 164

    Switchboard Ca se 9300 Series User’s Guide Page 164 Chapter 7 - Hardware Reference The arrows in the diagram below indicate where the grounding posts are located (on the back of the switchboard meter): P24 Power Supply Option 1. Connect the auxiliary power cable to the meter’s power supply terminals. 2. Connect the o ther end of the cable to an ...

  • Siemens 9300 - page 165

    9300 Series User’s Gui de Relay Expansion Board (Grayhill Rack ) Chapter 7 - Hardware Reference Page 165 Relay Expansion Board (Grayhill Rack) The optional relay extension board allows for custom digital output applications using specific Grayhill modules. This option includes a 4-position Grayhill module rack and one of two po wer supplies:  ...

  • Siemens 9300 - page 166

    Analog I/O 9300 Series Us er ’s Guide Page 166 Chapter 7 - Hardware Reference Wiring for Modules with Manual Override The following wiring scheme must be used when the relay extension board contains Grayhill modules with the manual override feature. D ANGER In this configuration , the outputs of the G rayhill mo dules with manual override will sw ...

  • Siemens 9300 - page 167

    9300 Series User’s Gui de TRAN Model Chapter 7 - Hardware Reference Page 167 TRAN Model The 9300 TRAN is a meter with no display. All specificat ions are the same as for standard 9330, except t he following. Unit Dimensions TRAN Model Dimensions 100mm (3.94") 6mm (0.24") 60mm (2.36") 164.5 mm (6.48”) 86mm (3.39") ...

  • Siemens 9300 - page 168

    Unit Dimensions 9300 Series User’s Guide Page 168 Chapter 7 - Hardware Reference ...

  • Siemens 9300 - page 169

    IND EX . . . . . . . . . . . . . . . I A Advanced Meter Setup menu 32 alarm server 131 command line arguments 132 configuring 132 Alert module 131 alerting 106 remote site event notification 132 via alphanumeric pager 133 via email 134 via numeric pager 133 Analog Input module 119 analog inputs using the optional 123 Analog Output module 119 analog ...

  • Siemens 9300 - page 170

    real-time 78, 88 data and event logging changing logged parameters 125 Data Record er module 45, 125 date 37 default meter functionality 42 demand setup 52 Designer 109 changing setup registers 88 configuring set up registers 89 creating new modules 91 customizing frameworks 90 deleting modules 91 editing existing frameworks 93 linking modules 91 m ...

  • Siemens 9300 - page 171

    min/max reset 29 Hyperterminal 118 I I/O 119 analog diagram 164 analog inputs 153 analog outputs 154 diagnostic mode 37 digital inputs 16, 153 digital outputs 152 onboard digital outputs 121 options 16 infrared 108 energy pulsing 110 Infrared Comm module 109 Input/Output (see I/O) interface customizing in Vista 81 internal modem 113, 150 internet c ...

  • Siemens 9300 - page 172

    Slave parameter map 56 Modbus Slave module 55 modem dialout 72 initialization st ring 113 modem initializati on string 44 ModemGate 113 module security 86 MV-90 46, 12 5 N nameplate 35 Nameplate Info menu 35 network components devices 72 dialout modem 72 servers 71 sites 72 network diagrams generating in Vista 75 numeric objects 77 O optical port c ...

  • Siemens 9300 - page 173

    models 136 security mechanisms 137 standard versus RM models 136 RS-485 connection methods to avoid 108 connections 107 diagnostic screen 36 specifications 146 S Sag/Swell modu le 32, 44 Screen Setup menu 34 style setting 34 values setting 34 security default settin gs 70 entering pa ssword 129 front panel 28 in modules 86 meter 70 software 70 stan ...

  • Siemens 9300 - page 174

    ...

  • Siemens 9300 - page 175

    ...

  • Siemens 9300 - page 176

    Siemens Energ y & A utomation, Inc. P ower Management T echnologies 3333 Old Milton Parkwa y Alpharet ta, GA 300 05 © Siemens Energ y & Automation, Inc. Siemens is a regi stered tradem ark of Siemens AG. Specificatio ns are subject to c hange without not ice. F or Nearest Sales Office 1 .800.964.41 1 4 www .sea.siemens.com sales/salesof fi ...

Manufacturer Siemens Category Yard Vacuum

Documents that we receive from a manufacturer of a Siemens 9300 can be divided into several groups. They are, among others:
- Siemens technical drawings
- 9300 manuals
- Siemens product data sheets
- information booklets
- or energy labels Siemens 9300
All of them are important, but the most important information from the point of view of use of the device are in the user manual Siemens 9300.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Siemens 9300, service manual, brief instructions and user manuals Siemens 9300. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Siemens 9300.

Similar manuals

A complete manual for the device Siemens 9300, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Siemens 9300 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Siemens 9300.

A complete Siemens manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Siemens 9300 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Siemens 9300, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Siemens 9300, that we can find in the current document
3. Tips how to use the basic functions of the device Siemens 9300 - which should help us in our first steps of using Siemens 9300
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Siemens 9300
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Siemens 9300 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Siemens 9300?

Use the form below

If you did not solve your problem by using a manual Siemens 9300, ask a question using the form below. If a user had a similar problem with Siemens 9300 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)