-
Sharp HT-SB200 - page 1
SOUND BAR SYSTEM MODEL HT-SB200 OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Note: This product is recommended for flat panel TV (LCD and plasma). is a trademark of SRS Labs, Inc. WO W HD technolo ...
-
Sharp HT-SB200 - page 2
2 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Important Instruction Special no tes W ARNINGS ● When the ON/ST AND-BY button is set at ST AND-BY position, main voltage is still present inside the speak er. When the ON/ST AND-BY button is set at ST AND-BY position, the speaker ma y be brought into operation by the remote control. ● This speaker ...
-
Sharp HT-SB200 - page 3
3 HT -SB200 2009 January 23 HT -SB200_A6_EN.fm General Information Accessories Please confirm that only the following accessories are included. Note: The AC/DC adaptor ma y be different from the one in the drawing. Contents Page ■ General Information Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Controls and indicato ...
-
Sharp HT-SB200 - page 4
4 HT -SB200 2008 December 22 HT -SB200_A6_EN.fm General Information Precautions ■ General ● Please ensure that the equipment is positioned in a well- ventilated area and ensure that there is at least 10 cm (4") of free space along the sides and top of the equipment. ● Use the speaker on a firm, lev el surface free from vibration. ● Ke ...
-
Sharp HT-SB200 - page 5
5 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm General Information Controls and indicator s ■ Front P anel Reference page 1. Sport Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2. Standard Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . 15 3. Information Display . . . . . . . . . . . . . . . . . . . . . . . ...
-
Sharp HT-SB200 - page 6
6 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm General Information Controls and indicator s (continued) ■ Rear Panel Reference page 1. Audio Line In 2 (3.5 mm stereo/headphone) Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2. Line In 1 (RCA/cinch) Sockets . . . . . . . . . . . . . . . . 12 3. DC Input Socket . ...
-
Sharp HT-SB200 - page 7
7 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm General Information Note: Before using remote control, please remo ve plastic shield at battery holder. ■ Remote Control Reference page 1. Remote Control T ransmitter . . . . . . . . . . . . . . . . . . 14 2. Cinema/Game Button. . . . . . . . . . . . . . . . . . . . . . . . 15 3. Standard Button . . ...
-
Sharp HT-SB200 - page 8
8 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Preparation for Use Speaker preparation Select from three installation methods according to the preferred position. Notes: ● Option 1 or option 2 indicates spike positions based on LCD TV stand. ● When attaching the spikes, place the speak er on a cushion or soft cloth to av oid damage. Caution: W ...
-
Sharp HT-SB200 - page 9
9 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Preparation for Use Caution: ● Be very careful to prev ent the speaker [1.75 kg (3.86 lbs.)] from falling when mounting on the w all. ● Before mounting, chec k the wall strength. (Do not put on the veneer plaster or white washed wall. The speak er may fall.) If unsure, consult a qualified service ...
-
Sharp HT-SB200 - page 10
10 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Preparation for Use Speaker preparation (continued) Note: Make sure all screws are fully tighten. (screws are not supplied) ■ Installing the speaker 4 Screw the wall mount angle to the wall as shown in the illustration. (T otal screw is 8 pieces) Wall surf ace Wall mount angle Wall mount angle Wall ...
-
Sharp HT-SB200 - page 11
11 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Preparation for Use Placing the speaker Installation image: Place the speaker as shown. Notes: ● As the sound from the speaker is omni-directional, you can place the speaker anywhere y ou like. Howe ver, it is recommended to place it as close to the TV as possible. ● The front panel of the speake ...
-
Sharp HT-SB200 - page 12
12 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Preparation for Use Speaker connections to TVs Caution: T ur n off all other equipment bef ore making any connections. T uner receiving for other audio system ● Placing the aerial near the speaker AC po wer lead may cause noise pick up . Place the aerial aw ay from the speaker f or better reception ...
-
Sharp HT-SB200 - page 13
13 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Preparation for Use A C power connection After checking all the connections hav e been made correctly , connect the AC po wer lead to the AC power input soc ket, then to the wall sock et. ■ Using with the A C/DC adaptor Notes: ● Unplug the AC/DC adaptor from the wall socket if the speaker will no ...
-
Sharp HT-SB200 - page 14
14 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Preparation for Use Remote control (contin ued) Caution: ● Do not use rechargeable battery (nick el-cadmium batter y , etc.). ● Danger of explosion if battery is incorrectly replaced. ● Replace only with the same or equivalent type. ● Batteries (batter y pack or batteries installed) shall not ...
-
Sharp HT-SB200 - page 15
15 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Basic Operation Remote control operation: Press the VOL + button to increase the v olume and the V OL – button to decrease the v olume. ■ Preset sound mode Main unit operation: When the SURROUND button is pressed, the current mode setting will light up. T o change to a different mode, press the S ...
-
Sharp HT-SB200 - page 16
16 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm References T roub leshooting char t Many potential problems can be resolv ed by the owner without calling a service technician. If something is wrong with this product, check the f ollowing before calling y our author ised SHARP dealer or service centre. ■ General ■ Remote control ■ Condensatio ...
-
Sharp HT-SB200 - page 17
17 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm References Maintenance ■ Cleaning the cabinet P er iodically wipe the cabinet with a soft cloth. Caution: ● Do not use chemicals for cleaning (petrol, paint thinner , etc.). It may damage the cabinet finish. ● Do not apply oil to the inside of each component. It may cause malfunctions. Error i ...
-
Sharp HT-SB200 - page 18
18 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm References Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production speaker . There ma y be some ...
-
Sharp HT-SB200 - page 19
MEMO ...
-
Sharp HT-SB200 - page 20
TINSEA282AWZZ 09A R AS 2 TINSEA290AWZZ ...
Do you have a question concerning Sharp HT-SB200?
Use the form below
If you did not solve your problem by using a manual Sharp HT-SB200, ask a question using the form below. If a user had a similar problem with Sharp HT-SB200 it is likely that he will want to share the way to solve it.