Manual Mitsubishi Electronics FX2N-8AD

88 pages 0.58 mb
Download

Go to site of 88

Summary
  • Mitsubishi Electronics FX2N-8AD - page 1

    USER’S MANU AL FX 2N -8AD Ana log in put b l oc k ...

  • Mitsubishi Electronics FX2N-8AD - page 2

    FX2N -8AD A nalog inpu t bloc k Forew or d • This manual contai ns te xt, diagrams and e xplana tions whic h will gu ide the reader in the correct inst allation and operation o f the FX 2N -8AD An alog input bloc k. It shoul d be read an d understoo d bef o re attem pting to install or u se the u nit. • Fur ther inf o r mati on can be found in ...

  • Mitsubishi Electronics FX2N-8AD - page 3

    FX 2N -8AD Analog input b loc k USER’S MANU AL FX2N -8AD A nalog inpu t bloc k Manu al number : JY992D86001 Manu al re vision : C Date : April 2003 ...

  • Mitsubishi Electronics FX2N-8AD - page 4

    FX2N -8AD A nalog inpu t bloc k ii ...

  • Mitsubishi Electronics FX2N-8AD - page 5

    FX2N -8AD A nalog inpu t bloc k iii Guidelines f or the Safety of the User and Pr otection of the FX 2N -8AD A nalog input bloc k. This manual pro vides inf or mation f or the use of the FX 2N -8AD Analo g input b l oc k. The manual has been written to be used by tr ained a nd competent pers onnel. The definition of su ch a person or perso ns is as ...

  • Mitsubishi Electronics FX2N-8AD - page 6

    FX2N -8AD A nalog inpu t bloc k iv Notes on the Symbols Us ed in this Manual At v ar ious times throughout this manual cer tai n symbols will be used to highlight points which are intended to ensure the users personal saf ety and protect the in tegrity of eq uipment. Whene v er any of the f o llowing symbols are enco untered its asso ciated note mu ...

  • Mitsubishi Electronics FX2N-8AD - page 7

    FX2N -8AD A nalog inpu t bloc k v • Under no circumstances will Mitsubi shi Electr ic be liab le respo nsible f or any consequential damage that ma y ar ise as a result of the in stallati on or use of this equipment. • All e xamples and diagr ams sho w n in this manual are intended only as an aid to understanding the te xt, not to g uarantee op ...

  • Mitsubishi Electronics FX2N-8AD - page 8

    FX2N -8AD A nalog inpu t bloc k vi ...

  • Mitsubishi Electronics FX2N-8AD - page 9

    FX2N-8AD Analog input b lock Contents. vii Guideline ...................... .................................... .................................... ........................ ...... iii 1. Intr oduction . ..... ..... ....... ..... .... ........ .... ..... ..... ....... ..... .... ........ .... ..... ....... 1-1 2. External Dimensions .............. ...

  • Mitsubishi Electronics FX2N-8AD - page 10

    FX2N-8AD Analog input b lock Contents. viii 8.2.14 BFM #32: Opera ting time .................................................................................. 8-26 8.2.15 BFM#33 disconn ection detection (Only go ods: since V1.10). ........................... 8-27 8.2.16 BFM #41 to BFM #48 : Offse t data BFM #51 to BFM #58: Gain data...... ........ ...

  • Mitsubishi Electronics FX2N-8AD - page 11

    Introduction 1 1-1 1. Intr od uction The FX 2N -8AD a nalog input b lock (hereafter ref erred to as "FX 2N -8AD") con v er ts 8 points of analog in put v alues (v oltage input, current input and temperature input) into d igital v alues , and tr ansf ers them to the PLC main unit. The FX 2N -8AD can be conn ected to FX 0N , FX 1N , FX 2N a ...

  • Mitsubishi Electronics FX2N-8AD - page 12

    FX2N-8AD Analog input b lock Introduction 1 1-2 4) Up to tw o FX 2N -8AD units can b e connected to FX 0N main un it, FX 0N e xtension unit, FX 1N main unit. Up to eight FX 2N -8AD units can be connected to one FX 2N Ser ies PLC . Up to f our FX 2N - 8AD units can be connected to one F X 2NC Ser ies PLC . (F or connection to the FX 2NC Series PLC , ...

  • Mitsubishi Electronics FX2N-8AD - page 13

    External Dimensions 2 2-1 2. External Dimensions Figure 2.1: External Dimensions COM2 I8+ I4+ V3+ I3+ COM3 COM1 COM5 COM8 I5+ 24+ 24- POWER 24V V2+ I2+ V4+ V7+ V1+ I1+ COM4 V5+ V6+ I7+ I6+ COM6 COM7 V8+ 7.5(0.30) 7.5(0.30) 105(4.13) 8(0.31) 75(2.95) 90(3.54) 67(2.64) (installation dimension) 75(2.95) 8(0.31) FX 2N -8AD 98(3.86) (installation dimens ...

  • Mitsubishi Electronics FX2N-8AD - page 14

    FX2N-8AD Analog input b lock External Dimensions 2 2-2 MEMO ...

  • Mitsubishi Electronics FX2N-8AD - page 15

    Part Name 3 3-1 3. P a r t Name • F or wir ing, ref er to Section 6. • Ne v er perf or m wir ing to ter minals . T able 3.1: Status indicator LED Indication Descripti o n PO WER L it while 5 V pow er is nor mally supplied from PLC . 24 V Lit while 24 V pow e r is no r mally supplied to “24+” an d “24-” ter minals of FX 2N -8AD .V V1+ I1 ...

  • Mitsubishi Electronics FX2N-8AD - page 16

    FX2N-8AD Analog input b lock Part Name 3 3-2 MEMO ...

  • Mitsubishi Electronics FX2N-8AD - page 17

    Installation 4 4-1 4. Installation Install th e FX 2N -8AD to the right side of a mai n unit, e xtension uni t, e xtension b loc k or speci al b loc k of the FX 0N /FX 1N /FX 2N /F X 2NC Series PLC . The FX 2N -8AD ca n be insta lled with a DIN r ail (DIN46277 of 35 mm in wid th) or di rectly installe d with screws M 4. F or the details , ref er to ...

  • Mitsubishi Electronics FX2N-8AD - page 18

    FX2N-8AD Analog input b lock Installation 4 4-2 Figure 4.1: Installation with DIN rail • The FX 2N -8AD can be i nstalled on a DIN r ail (DIN46277) of 35 mm in width as it is . F or remov al, pull down on the DIN r ail mounting hook, then rem ov e the FX 2N -8AD . Figure 4.2: Direct installation •T h e F X 2N -8AD can be ins tall ed directl y b ...

  • Mitsubishi Electronics FX2N-8AD - page 19

    Connection to PLC 5 5-1 5. Co nn ectio n to PLC Connect th e FX 2N -8AD to the r ight sid e of a m ain unit, e xtension unit or e xtension b loc k of FX 0N , FX 1N , FX 2N , FX 2NC Se r ies PLC with an e xtension cab le. F or connection t o a basic unit or e xtension b loc k of the FX 2NC Ser ies PLC , use an FX 2NC -CNV - IF . Please chec k power ...

  • Mitsubishi Electronics FX2N-8AD - page 20

    FX2N-8AD Analog input b lock Connection to PLC 5 5-2 MEMO ...

  • Mitsubishi Electronics FX2N-8AD - page 21

    Wiring 6 6-1 6. Wiring 6.1 Caution 1) Do not la y signal c ab le near to high v oltage po w er cab le or hous e them in the sam e tr unking duct. Eff ects of noi se or surge i nduction ma y occur . K e ep signal c ables a saf e distance of more than 100 m m (3.94") from these pow er cab les. 2) The term inal scre ws of the FX 2N -8AD are M3 (0 ...

  • Mitsubishi Electronics FX2N-8AD - page 22

    FX2N-8AD Analog input b lock Wiring 6 6-2 Figure 6.2: Wiring Figure 6.3: Crimp T erminals V3+ COM3 I3+ V2+ I2+ V1+ I1+ COM1 24+ 24- *3 *2 *1 Shie l ded c able Thermo coupl e (K, J o r T type ) Current inp ut Vol t age in put 250 Ω 5.8k Ω 250 Ω 5.8k Ω 5.8k Ω 250 Ω 200k Ω CH3 CH2 CH1 AG *5 DC24V Class D groundi ng *4 Connect ed to termi ...

  • Mitsubishi Electronics FX2N-8AD - page 23

    FX2N-8AD Analog input b lock Wiring 6 6-3 *1 Use a tw o-core , twisted, shiel ded cabl e f or the analog inpu t line, and separ ate it from other po wer line s or a lines easi ly induced. *2 If there i s vo ltage r ipple in t he input or there i s noise in the e xter nal wir ing, conne ct a capacitor of appro ximately 0.1 to 0. 47 µ F, 2 5 V . *3 ...

  • Mitsubishi Electronics FX2N-8AD - page 24

    FX2N-8AD Analog input b lock Wiring 6 6-4 MEMO ...

  • Mitsubishi Electronics FX2N-8AD - page 25

    Specifications 7 7-1 7. Specifica tions T ab le 7.1: General specifications Item Specifications Ambient temperature range 0 to +55 ° C dur ing ope ration, -20 to +70 ° C dur ing storage Ambient humidity 35 to 85 % RH during operation (De w condensation shall not be allowed.) Vibration resistanc e In conf or mance to JIS C004 0 F requency 10 to 5 ...

  • Mitsubishi Electronics FX2N-8AD - page 26

    FX2N-8AD Analog input b lock Specifications 7 7-2 T able 7.2 : P ower supp ly specifications Item Specifications Interf a ce dr iving pow er supp ly 24 V DC±10%, 80 mA (maximum), supplied via ter minal from outside CPU driving power supply 5 V DC , 50 mA, supplied via e xtension cable from P LC main unit T ab le 7.3: P erf ormance specifications I ...

  • Mitsubishi Electronics FX2N-8AD - page 27

    FX2N-8AD Analog input b lock Specifications 7 7-3 T able 7.4 : V oltage/current input specific ations Item V olta g e input Curren t inp ut Analo g input r ange -10 to +10 V DC (input resistance: 200 k Ω ) Adjustme nt is enab l ed in f ollow ing c onditio n: Offset v alue: -10 to +9 V Gain v alue: 1 0 V or less "Gai n - Offs et": > 1 ...

  • Mitsubishi Electronics FX2N-8AD - page 28

    FX2N-8AD Analog input b lock Specifications 7 7-4 • F or the I/O c haracteristics of th e v oltage/curren t/ther mocouple in put, ref er to Section 9. •F X 2N -8AD is from production goods (SERIAL 0 Z****) to V1.10 in December , 2000. T able 7.5 : Thermocouple input specifications Item K type thermocouple J type thermocouple T type ther mo coup ...

  • Mitsubishi Electronics FX2N-8AD - page 29

    Buffer Memory (BFM) 8 8-1 8. Buff er Memory (BFM) Caution 1) Do not access th e b uff er memor y of “Reser ved” (BFM #18, #23, #25, # 31, #33 to #40, #49 to 50, #5 9, #60, #69, #70, #79, # 80, #89, #90, #99, #10 0, #120 to #197) by th e FR OM/T O instr uction. There is a pos sibility to cau se abnor mal oper ation of the FX 2N - 8AD if acces s ...

  • Mitsubishi Electronics FX2N-8AD - page 30

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-2 Data tr ansf er betwee n the FX 2N -8AD and th e PLC m ain u nit is perf or med th rough buff er memories (hereafter ref erred to as "BFM") of th e FX 2N -8AD . Each BF M consists of 1 word, 16 bi ts. The BFM No . 0 to 3399 and a function are a ssigned to each BF M. Use FR OM/T O inst ...

  • Mitsubishi Electronics FX2N-8AD - page 31

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-3 8.1 Buffer Memorie s (BFM) lists T ab le 8.1: BFM Lists BFM No. Desc ription Hold aga inst po wer failur e Initial v alue #0 Specif ies input mode of CH1 to CH4 . ¡ H0000 at ship ment #1 Specif ies input mode of CH5 to CH8 . ¡ H0000 at ship ment #2 Number of times o f a v e r aging of CH1 S e ...

  • Mitsubishi Electronics FX2N-8AD - page 32

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-4 #18 Reser v ed  #19 Disab les sett ing change of I/ O characte r i stics (BFM #0, BFM #1, BFM #21) and co nv enient function s (BFM #22) . Disab les change .: K2, Enab les change .: K1 ¡ K1 a t shipme nt #20 Init ia li zes fu n ct io n s. (Init ializ es functions at K1, then returns auto ...

  • Mitsubishi Electronics FX2N-8AD - page 33

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-5 #32 Oper ating time 0 to 64,80 0 (s) After th at, 64,800 is k ept. Measur eme nt star ts wh en pow er i s turned on, a nd meas ured v alue is reset when po wer is turned off .  K0 #33 Thermo-couple dis connectio n detect ion(V1.10 or hi gher .) It e x ecu tes the disconne cti on detection wi ...

  • Mitsubishi Electronics FX2N-8AD - page 34

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-6 #53 CH3 gain data (mV or µ A) ¡ K5000 at shipment #54 CH4 gain data (mV or µ A) ¡ K5000 at shipment #55 CH5 gain data (mV or µ A) ¡ K5000 at shipment #56 CH6 gain data (mV or µ A) ¡ K5000 at shipment #57 CH7 gain data (mV or µ A) ¡ K5000 at shipment #58 CH8 gain data (mV or µ A) ¡ K ...

  • Mitsubishi Electronics FX2N-8AD - page 35

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-7 #68 CH8 addit ion data Setting r ange: -16,0 00 to +16, 000 (v al id w hile B FM #22 b 0 is ON)  K0 • • • Reser v ed  #71 CH1 low er limit v alue error set v alue (v alid while BFM #22 b1 is ON)  Min imum digit al val ue inside inp ut rang e #72 CH2 low er limit v alue error s ...

  • Mitsubishi Electronics FX2N-8AD - page 36

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-8 #81 CH1 upper limi t va lue error set v alue (v alid while BFM #22 b1 is ON)  Maximum digital v alue inside input range #82 CH2 upper limi t va lue error set v alue (v alid while BFM #22 b1 is ON)  Maximum digital v alue inside input range #83 CH3 upper limi t va lue error set v alue (v a ...

  • Mitsubishi Electronics FX2N-8AD - page 37

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-9 #93 CH3 sudden chan ge de tection set v alue Setti ng r ange: 1 to 50% of fu ll scale (v alid while B FM #22 b2 is ON)  5% of full sca le #94 CH4 sudden chan ge de tection set v alue Setti ng r ange: 1 to 50% of fu ll scale (v alid while B FM #22 b2 is ON)  5% of full sca le #95 CH5 sudde ...

  • Mitsubishi Electronics FX2N-8AD - page 38

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-10 #107 CH7 peak v alue (mi nimum val ue) (v alid whil e BFM #22 b3 is ON)  Refer to 8.2. 21. #108 CH8 peak v alue (mi nimum val ue) (v alid whil e BFM #22 b3 is ON)  #109 P eak v alue (mini mum v al ue) reset flag  K0 #110 Un usab le  Refer to 8.2. 21. #111 CH1 peak v alue (maxim um ...

  • Mitsubishi Electronics FX2N-8AD - page 39

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-11 #199 Rese ts or stops data history . (v alid onl y in cha nnels f or which numb er of times of a ver aging (BFM # 2 t o #9) is se t to "1 ")  K0 #2 00 C H1 data hist or y (1s t value) Data hist or y sam pling is v alid only in chann els f or which number of times of a v eraging (B ...

  • Mitsubishi Electronics FX2N-8AD - page 40

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-12 • • • Data hist or y sam pling is v alid only in chann els f or which number of times of a v eraging (BFM # 2 t o #9) is se t to "1 ".  #3397 CH8 dat a histor y (398th v alue)  K0 #3398 CH8 dat a histor y (399th v alue)  K0 #3399 CH8 dat a histor y (400th v alue)  K ...

  • Mitsubishi Electronics FX2N-8AD - page 41

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-13 8.2 Details of b uffer memories 8.2.1 BFM #0, #1: Specifies inp ut mode . Specify the inpu t mode of CH1 to CH4 b y writing a numeric v alue to BFM #0. Specify the input mode of CH5 to CH8 b y wr iting a num er i c v a lue to BFM #1. In the inpu t mode specifi cation, ea ch BFM is e xpressed i ...

  • Mitsubishi Electronics FX2N-8AD - page 42

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-14 ¡ =8: Curre nt inpu t mod e , analo g v a lue d irect d ispla y (- 20,000 to +20, 000), resolu tion 2.50 µ A ¡ =9: Ther mocouple in put mode, K type, Celsius displa y (-100 to +1,200 ° C), re so lu ti o n 0 .1 ° C ¡ =A: Ther mocouple inp ut mode, J type , Celsius disp la y (-100 to +600 ...

  • Mitsubishi Electronics FX2N-8AD - page 43

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-15 8.2.2 BFM #2 to BFM #9: Number of tim es of avera ging When using BFM #10 to #17 as the av erage da ta, wr ite t he number of times of a v eragin g to BFM #2 to BFM #9. The setting range of the n umber of tim es of a v eraging i s 1 to 4,095. Ho we v er , when yo u set the numbe r o f times of ...

  • Mitsubishi Electronics FX2N-8AD - page 44

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-16 Update of a ver age data • When the n umber of times of a v erag ing (BFM #2 to BFM #9) is s et to "400" or less , the a v erage (BFM #10 to BFM #17) is updated e v er y ti me the A/D con versi on processing is perf or med. At this time, the a v erage is alwa ys calculated b y samp ...

  • Mitsubishi Electronics FX2N-8AD - page 45

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-17 8.2.3 BFM #10 to BFM #1 7: Channel data The A/D con v ersion data o f each channel is written to BFM #10 t o BFM #17. Y ou can select the immedia te (curre nt v alue) data or the a v er age data b y se tting the n umber of times of a v eraging (BFM #2 to BFM #9) described abo v e. 8.2.4 BMF #1 ...

  • Mitsubishi Electronics FX2N-8AD - page 46

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-18 8.2.6 BFM #21: Wri tes I/O characteristics Each chann el No . is assigned to the lo wer ei ght bits of BFM #21. When a bi t is set to ON, the offset data (BFM #41 to BFM #48) and the gain data (BFM #51 to BFM #58) of the assigned channel No . are written to the b uilt-in memor y (EEPR OM), and ...

  • Mitsubishi Electronics FX2N-8AD - page 47

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-19 8.2.7 BFM #22: Sets con venient functions The functio ns descr ibed be low are assigne d to b0 to b3 of BFM #22. When a bit is set to ON, the assig ned function beco mes v alid. When a bit i s set to OFF , the ass igned functio n becomes in v alid. b0: Data add ition functio n The data (BFM #1 ...

  • Mitsubishi Electronics FX2N-8AD - page 48

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-20 8.2.8 BFM #24: Specifies high-speed con vers ion channel When using only the v oltage input m ode and the curren t input mode , you c an improv e the A/D con v ersion timing (to 1/4 of the nor mal timing) f or only one channel among CH1 to CH8. Ho we ve r , the con v ersion timi ng becomes slo ...

  • Mitsubishi Electronics FX2N-8AD - page 49

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-21 8.2.9 BFM #26: Upp er/lower limit v alue err or status When y ou use the u pper/lo w er limit v alue detection funct ion (BFM #22 b1), the de tection res ult is written to BFM #26. The lo wer lim it v alue error or t he u pper lim it v alue error of e ach cha nnel is as sig ned to e ach bit of ...

  • Mitsubishi Electronics FX2N-8AD - page 50

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-22 8.2.10 BFM #27: A/D data sud den change detection status When y ou use the sudden change detection function (BFM #22 b2), the detection result is wri tten to BFM #2 7. The sud den change de tection + d irectio n or the sudden change de tection - dir ection of each channel is assign ed to each ...

  • Mitsubishi Electronics FX2N-8AD - page 51

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-23 8.2.11 BFM #28: Scale o ver status When the analog input v alue of each channel is outside the range in which A/D conv ersion is a v ailab le, the result is written to BFM #28. Once a bit tur ns ON, it remains ON until it is ov erwr itten with the OFF status b y the T O instruction giv en b y ...

  • Mitsubishi Electronics FX2N-8AD - page 52

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-24 T able 8.5 : Bit assignment in BFM #28 Bit No. Channel No. Description b0 CH1 Scale o v er : Less than lower limit b1 Scale ov er : More than upper limit and disconnection detection b2 CH2 Scale o v er : Less than lower limit b3 Scale ov er : More than upper limit and disconnection detection b ...

  • Mitsubishi Electronics FX2N-8AD - page 53

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-25 8.2.12 BFM #29: Err or status The error inf or mation is assigned to each bit of BFM #29. T able 8.6 : Bit assignment in BFM #29 Bit No. Assignment Description b0 Error d etected b0 is ON while eith er one among b1 to b4 is ON. b1 Offset/gain set v alue error Offset/gain v alue is outside sett ...

  • Mitsubishi Electronics FX2N-8AD - page 54

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-26 8.2.13 BFM #30: Model code BFM #30 store s the fix ed v alue "K2050". 8.2.14 BFM #32: Operating time BFM #32 store s the contin uous oper ating time of th e FX 2N -8AD . Measurement star ts when the pow er is t ur ned on, and the measu r ed v alue is reset when the power is tur ned o ...

  • Mitsubishi Electronics FX2N-8AD - page 55

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-27 8.2.15 BFM#33 disconnection d etection (Onl y goods: since V1.10). It does the disconnection detection of all channels used by writing K1 in BFM#33 in the ther mo-couple input mode (Set it b y BFM#1 and # 0). It e x ecutes the dis connection detection only once , and the res ult is written in ...

  • Mitsubishi Electronics FX2N-8AD - page 56

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-28 8.2.16 BFM #41 to BFM #48: Offset da ta BFM #51 to BFM #5 8: Gain data Offset data : Analog input v alue when the digit al va lue is "0" Gain data : Analog inpu t v alue when the d igital v alue is as sho wn belo w (The di gital v alue v ar ies dependin g on the setting of th e input ...

  • Mitsubishi Electronics FX2N-8AD - page 57

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-29 Initial offset/gain value (Un i t: mV f or v oltage input, µ A f or current input) Setting range Ho we ver , the actual eff ectiv e input r ange is "-10 to +10 V" or "-20 to +20 m A". T able 8.8 : Initial offset/gain v alue Input mode (BFM #0, BFM #1) 012345 678 Initial of ...

  • Mitsubishi Electronics FX2N-8AD - page 58

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-30 8.2.17 BFM #61 to BFM #68: Ad dition data When you use the data addition functio n (BFM #22 b0), the data ( BFM #10 to BFM #17), the peak v al ue (BFM #101 to BFM #108, BFM #111 to BFM #118) and the data his tor y (BFM #200 to BFM #999) of each channel become the measured v alue added b y the ...

  • Mitsubishi Electronics FX2N-8AD - page 59

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-31 8.2.18 BFM #71 to BFM #78: Lo wer limit, err or set v alue BFM #81 to BFM #8 8: Upper limit, err or set v alue When usi ng the upper/lower limit v alu e detection f unction ( BFM #22 b1 ), writ e the lower limit v alue of each channel to BFM #71 to BFM #79 and the upper limit v a lue of each c ...

  • Mitsubishi Electronics FX2N-8AD - page 60

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-32 7: Current input mode (-20 to +2 0 mA), re so lution 20 mA x 1/4,000 -4 096 to 4095 -4096 4095 8: Cur rent in put mode, an alog v alu e dir ect d ispl a y (-20 ,000 t o +20, 000) -20400 to 20400 -20400 20400 9: Ther mo couple input mode (K type), Celsi us displa y -1000 to 12000 -1000 12000 A: ...

  • Mitsubishi Electronics FX2N-8AD - page 61

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-33 8.2.19 BFM #91 to BFM #98: Sud den change detection set v alue When using the su dden change detection function (BFM #22 b2), wr ite the set v alue to judge the sudden change. When th e data (BFM #10 to BFM # 17) of eac h channel is updat ed, if the di ff erence bet ween the pre vious v alue a ...

  • Mitsubishi Electronics FX2N-8AD - page 62

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-34 A: Ther mocoupl e input mode (J type), Celsius displa y 1 to 3500 35 0 B: Ther mocoupl e input mode (T type), Celsius displa y 1 to 4500 450 C: Ther mocouple input mode (K type ), F arenheit display 1 to 11700 1170 D: Ther mocou ple input mod e (J type), F arenh eit disp la y 1 to 6 300 63 0 E ...

  • Mitsubishi Electronics FX2N-8AD - page 63

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-35 8.2.20 BFM #99: Clear s upper/lower limi t v alue err or and sudde n change detection err or The commands to clear the lower limit v alue error , the upp er limit v a lue error and the sudden change det ection error are assi gned to the lo wer three bits o f BFM #99. When a bit is set to ON, t ...

  • Mitsubishi Electronics FX2N-8AD - page 64

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-36 8.2.21 BFM #101 to BFM #108: P eak v alue (minim um v alue) BFM #111 to BFM # 118: P eak v alue (maxim um value) When y ou use the peak v alue hold function (BFM #22 b3), one of th e con v enient funct ions , the minimum v alue of the data (BFM #10 to BFM #17) of each channel is wr itten to BF ...

  • Mitsubishi Electronics FX2N-8AD - page 65

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-37 8.2.22 BFM #109: P eak va lue reset flag (minim um value) BFM #119: P eak v alue reset flag (max imum v alue) When y ou use the peak v alue hold function (BFM #22 b3), BFM #109 clears the peak v alue (minimum v alue) stored in BFM #101 to BFM #108, and BFM #119 clears the peak v alue (maxim um ...

  • Mitsubishi Electronics FX2N-8AD - page 66

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-38 8.2.23 BFM #198: Data history sampling time Set the d ata histor y sampli ng time . BFM #198 is v alid only in c hannels f or which the n umber of tim es of a v eragin g (BFM #2 to #9) is set to "1". Setting range 0 to 30,000 ms Sampling c ycle When onl y v oltage input and curre nt ...

  • Mitsubishi Electronics FX2N-8AD - page 67

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-39 When the high-speed c on ver sion mode is used (and onl y v oltage input and current input are used) When the set v alue is "0" or "1" Channel sp ecified f or high-speed c on vers ion : 1 ms Other channel s : 1 ms x Numb er of eff ectiv e channels When the set v alue is &qu ...

  • Mitsubishi Electronics FX2N-8AD - page 68

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-40 8.2.24 BFM #199: Resets or stops data history The data histor y reset function is assigned to the lo wer eight bits of BFM #199. The data histor y stop func tion is ass i gned to the upper eight b its of BFM #199. Each functio n is val id only in channels f or which the num ber of times of a v ...

  • Mitsubishi Electronics FX2N-8AD - page 69

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-41 8.2.25 BFM #200 to BFM #3399 : Data history The A/D con v ersion of eac h channel is sampled, and written to BFM #200 to BFM #3399. The tab le belo w sh o ws th e assign ment of ch annel No . and BFM No . Data is stored in turn from the small est BFM No . Up to 400 v alues can be stored f or e ...

  • Mitsubishi Electronics FX2N-8AD - page 70

    FX2N-8AD Analog input b lock Buffer Memory (BFM) 8 8-42 MEMO ...

  • Mitsubishi Electronics FX2N-8AD - page 71

    Adjustment of I/O Characteristics 9 9-1 9. Adjustme nt of I/O Characteristics At the time of shipment from the f actor y , the FX 2N -8AD has t he standard I/O char acter isti cs in accordanc e with each input mode (BFM #0, BFM #1). In the v oltage input mode and the current input mode , y ou can ad just the standard I/O char acter istics f or each ...

  • Mitsubishi Electronics FX2N-8AD - page 72

    FX2N-8AD Analog input b lock Adjustment of I/O Characteristics 9 9-2 9.1 Standar d I/O characteristics Explanation on des cription The input m ode of the standard I/ O characte r istics is abbre viated as sho wn belo w . Figure 9.1: Standard I/O characteristic s 0. V oltage input, -10 to 10V , 20V × 1/32,000 ➀ ➁ ➂ ➃ ➀ ➁ ➂ ➃ : Input ...

  • Mitsubishi Electronics FX2N-8AD - page 73

    FX2N-8AD Analog input b lock Adjustment of I/O Characteristics 9 9-3 Digital v alue -10 10 10,00 0 Approx . -10, 200 Approx . +10.2 V Approx . -10.2 V -10,0 00 Approx . +10, 20 0 Input volta ge (V) Digital value Input c urrent (mA) 04 2 0 8,000 2. V olta ge input, d ire ct displa y (-10,00 0 t o +10,000) 3. Cu rrent inpu t, 4 to 20 mA, 16 mA x 1 /8 ...

  • Mitsubishi Electronics FX2N-8AD - page 74

    FX2N-8AD Analog input b lock Adjustment of I/O Characteristics 9 9-4 Digital v alue -20 20 8,00 0 -8,00 0 Inpu t current (mA) 0 Digital value -20 20 4,000 -4,000 Input current (mA) 0 6. Curre nt in put, -20 to +20 mA, 40 mA x 1/1 6,000 7. Curre nt in put, -2 0 to +20 mA, 40 mA x 1/ 8,000 Digital value -20 20 20,00 0 -20,00 0 Input current (mA) 0 Di ...

  • Mitsubishi Electronics FX2N-8AD - page 75

    FX2N-8AD Analog input b lock Adjustment of I/O Characteristics 9 9-5 Digital v alue 0 6,00 0 -1,00 0 Inpu t tem perat ure (°C) -100 600 Digital value 0 3,500 -1,000 Input temp erat ure (°C) -100 350 A. Ther moco uple input , J typ e , Celsius B. Ther mo coupl e inpu t, T typ e, Celsius Digital value 0 21,92 0 -1,480 Input temp erat ure (°F) -148 ...

  • Mitsubishi Electronics FX2N-8AD - page 76

    FX2N-8AD Analog input b lock Adjustment of I/O Characteristics 9 9-6 Digital v alue 0 6,62 0 -1,48 0 Inpu t tem perat ure (°F) -148 662 E. Ther moco uple input , T type, F are nheit ...

  • Mitsubishi Electronics FX2N-8AD - page 77

    FX2N-8AD Analog input b lock Adjustment of I/O Characteristics 9 9-7 9.2 Adjustment of I/O characteristics Adjust the I/ O characte r isti cs using the b uff er memories in the FX 2N -8AD . At first, write the inp ut mode to BF M #0 and BFM #1, write the offset data to BFM #41 to BFM #48, then write the ga in data to BFM # 51 to BFM #58. Afte r tha ...

  • Mitsubishi Electronics FX2N-8AD - page 78

    FX2N-8AD Analog input b lock Adjustment of I/O Characteristics 9 9-8 Figure 9.2: Example pr ogram *1 It ta kes app ro ximately 5 seconds to change the i nput mod e (BFM #0, BMF #1) (to change each set v alue). Assure the time inter v al of 5 seco nds or more after change of th e input mode unt il e x ecution of write of each setting (T O instr ucti ...

  • Mitsubishi Electronics FX2N-8AD - page 79

    Example program 10 10-1 10. Examp le pr ogram This secti on intr oduces an e xample of prog r am to tak e analog data to the PLC using the FX 2N - 8AD . Condition System configuration: The FX 2N -8AD (unit No . 0) is connected a s a speci al bloc k nearest to t he FX 2N /FX 2N C Seri es PLC main unit. Input mode: CH1 and CH2 : Mode 0 (v oltage inpu ...

  • Mitsubishi Electronics FX2N-8AD - page 80

    FX2N-8AD Analog input b lock Example program 10 10-2 Data history function: Used while sa mpling time is set to 0 ms (i nitial v alue). CH1 to CH4 : Sampling ti me = 1 ms x 6 (Nu mber of eff ectiv e channels) = 6 ms CH5 and CH6 : Sampling ti me = 40 ms x 6 (Numbe r of eff ectiv e channels) = 240 ms I/O assignment: X001 : Clears the up per/low er li ...

  • Mitsubishi Electronics FX2N-8AD - page 81

    FX2N-8AD Analog input b lock Example program 10 10-3 Figure 10.1:Example program M80 0 2 K0 K0 H3 30 0 K1 K0 K1 HFF99 K1 K0 K22 H0 00 2 K1 K0 K1 0 D0 K6 K0 K26 K4M0 K1 Spec i f ies t he inp ut mode of CH1 to CH4. Spec i f ies t he inp ut mode of CH5 to CH8. Enable s the uppe r/lower limit value detection function. Reads t he c hannel dat a from CH1 ...

  • Mitsubishi Electronics FX2N-8AD - page 82

    FX2N-8AD Analog input b lock Example program 10 10-4 • • • Y0 M0 Lower li mit valu e er ror of CH1 Y1 M1 Upper li mit valu e er ror of CH1 Y17 M15 Upper li mit valu e er ror of CH8 Y20 M20 Scale ove r error of CH 1 (lowe r limit valu e) Y21 M21 Scale ove r error of CH 1 (upper limit value ) Y37 M35 Scale ove r error of CH 8 (upper limit value ...

  • Mitsubishi Electronics FX2N-8AD - page 83

    FX2N-8AD Analog input b lock Example program 10 10-5 Note: When man y FR OM/T O instructions are e x ecuted in the same sc an, the PLC might h av e a w atchdog timer error . In this case , add a wa tchdog timer reset (FNC07 WDT) instruction with each FR OM/T O instr uction. Refres hes t he wat ch dog ti mer. *1 T0 K0 K200 D10 K10 K0 K600 D20 K10 K0 ...

  • Mitsubishi Electronics FX2N-8AD - page 84

    FX2N-8AD Analog input b lock Example program 10 10-6 MEMO ...

  • Mitsubishi Electronics FX2N-8AD - page 85

    Appendix A A-1 Append ix A: Assoc iated Man uals Lis t F or fur ther inf or mation manua l about FX Series, ref er to f ollowin g tab le. T able A-1: List of Further Info rmation Manual Manual Name Manual No. Description FX 0 /FX 0N Hardware Manual JY992D47501 This manual contains hardware e x plan ations of wir ing, installation and sp ecification ...

  • Mitsubishi Electronics FX2N-8AD - page 86

    FX2N-8AD Analog input b lock Appendix A A-2 MEMO ...

  • Mitsubishi Electronics FX2N-8AD - page 87

    ...

  • Mitsubishi Electronics FX2N-8AD - page 88

    HEAD OF FICE: MITSUB ISHI DE NKI BLD G MARUNO UCHI TOKYO 100- 8310 HIMEJI WORKS: 840, CHIYODA CHO , HIMEJI, JAPA N JY992D860 01C (MEE) Effective Apr. 20 03 Specifications are sub uject tochan ge without notice. USER’S MANU AL FX 2N -8AD Analog input b loc k MODEL FX2N-8AD-U-E MODEL CODE 09R608 ...

Manufacturer Mitsubishi Electronics Category TV Converter Box

Documents that we receive from a manufacturer of a Mitsubishi Electronics FX2N-8AD can be divided into several groups. They are, among others:
- Mitsubishi Electronics technical drawings
- FX2N-8AD manuals
- Mitsubishi Electronics product data sheets
- information booklets
- or energy labels Mitsubishi Electronics FX2N-8AD
All of them are important, but the most important information from the point of view of use of the device are in the user manual Mitsubishi Electronics FX2N-8AD.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Mitsubishi Electronics FX2N-8AD, service manual, brief instructions and user manuals Mitsubishi Electronics FX2N-8AD. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Mitsubishi Electronics FX2N-8AD.

A complete manual for the device Mitsubishi Electronics FX2N-8AD, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Mitsubishi Electronics FX2N-8AD by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Mitsubishi Electronics FX2N-8AD.

A complete Mitsubishi Electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Mitsubishi Electronics FX2N-8AD - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Mitsubishi Electronics FX2N-8AD, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Mitsubishi Electronics FX2N-8AD, that we can find in the current document
3. Tips how to use the basic functions of the device Mitsubishi Electronics FX2N-8AD - which should help us in our first steps of using Mitsubishi Electronics FX2N-8AD
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Mitsubishi Electronics FX2N-8AD
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Mitsubishi Electronics FX2N-8AD in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Mitsubishi Electronics FX2N-8AD?

Use the form below

If you did not solve your problem by using a manual Mitsubishi Electronics FX2N-8AD, ask a question using the form below. If a user had a similar problem with Mitsubishi Electronics FX2N-8AD it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)