Manual Wells Bulit-In Electric Griddles

14 pages 0.39 mb
Download

Go to site of 14

Summary
  • Wells Bulit-In Electric Griddles - page 1

    WELLS MANUFACTURING COMPANY 2 ERIK CIRCLE, P . O. Box 280 Verdi, NV 89439 Customer Service (775) 345-0444 Ext.502 fax: (775) 345-0569 www.wellsbloomfield.com OPER ATION MANUAL for BUIL T -IN ELECTRIC GRIDDLES includes: INS TALLATION USE and CARE IMPORTAN T : DO NOT DISCARD THIS MANUAL This manual is considered to be part of the GRIDDLE and is to be ...

  • Wells Bulit-In Electric Griddles - page 2

    x i All commercial cooking equipment manufactured by WELLS MF G . CO. is warranted against defects in materials and workmanship for a period of one year from the date of original installation or 18 months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser only . THIS WARRANTY IS THE C ...

  • Wells Bulit-In Electric Griddles - page 3

    TABLE OF CONTENTS 1 SHIPPING DAMAGE CLAIM PROCEDURE NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory. Upon acceptance of this shipment, the transportation company assumes full responsibility for its safe deliver y . IF SHIPMENT ARRIVES DAMAGED ...

  • Wells Bulit-In Electric Griddles - page 4

    2 FE ATURES and OPER AT ING CONTROLS On THERMOST A TICALL Y CONTROLLED griddles, power is applied to the griddle heating element according to the control knob position and the actual temperature at the temperature sensing thermobulb. The temperature of each section of the griddle is individually controllable to allow preparation of different produc ...

  • Wells Bulit-In Electric Griddles - page 5

    3 SAFETY PROCEDURES Knowledge of proper procedures is essential to the safe operation of electrically energized equipment. In accordance with generally accepted product safety labeling guidelines for potential hazards, the following signal words and symbols are used throughout this manual. WARNING - Warning is used to indicate the presence of a haz ...

  • Wells Bulit-In Electric Griddles - page 6

    4 INS TALLATION INSTRUCTIONS A. UNPACKING AND INSPECTION 1. Carefully remove the GRIDDLE from the carton. Remove all protective plastic film, packaging materials and accessories from the GRIDDLE before connecting electrical power or otherwise performing any installation procedures. NOTE: DO NOT discard the CAR T ON and other P ACKAGING MA TERIAL un ...

  • Wells Bulit-In Electric Griddles - page 7

    5 RECOMMENDED GRILLING TIMES AND TEMPERATURES NOTE: The times and temperatures in this chart are suggestions only. Y our own experience with your own menu items will be your best guide to achieving the best food product. PRODUCT TEMPER ATURE ºF TIME Sausage, link and patty 350º 3 minutes Bacon 350º 2 - 3 minutes Canadian Bacon 350º 2 - 3 minute ...

  • Wells Bulit-In Electric Griddles - page 8

    6 OPER AT ING INSTRUCTIONS A. PREPARING THE GRIDDLE SUR FACE 1. SEASONING STANDARD GRIDDLES As manufactured, the steel surface of your Wells griddle has microscopic pores. It is important to fill these pores with oil in order to provide a hard, non-stick cooking surface. a. Preheat the griddle surface to 375ºF (191ºC). b. Spread a light film of c ...

  • Wells Bulit-In Electric Griddles - page 9

    7 DO NOT REMOVE FROM MANUAL - PHOTOCOPY TO DISTRIBUTE PREVENTATIVE MAINTENANCE CARD STANDARD ELECTRIC GRIDDLE CLEANING INSTRUCTIONS PREPARATIONS: Set temperature control to 220º F . Allow the griddle temperature to drop to 220ºF before proceeding. FREQUENC Y: Daily TOOLS: Griddle Brick or Pumice Stone Fiber Brush Plastic Scouring Pad, Plastic Scr ...

  • Wells Bulit-In Electric Griddles - page 10

    PM 111.1 8 ...

  • Wells Bulit-In Electric Griddles - page 11

    9 DO NOT REMOVE FROM MANUAL - PHOTOCOPY TO DISTRIBUTE PREVENTATIVE MAINTENANCE CARD CHROME PL ATED ELECTRIC GRIDDLE CLEANING INSTRUCTIONS PREPARATIONS: Set temperature control to 225º F . Allow the griddle temperature to drop to 225ºF before proceeding. FREQUENC Y: Daily TOOLS: 4 ” Razor-Style Scraper Mild Detergent, Non-Abrasive Cleanser Clean ...

  • Wells Bulit-In Electric Griddles - page 12

    PM 101.2 1 0 ...

  • Wells Bulit-In Electric Griddles - page 13

    CUSTOMER SERVICE DA TA please have this information available if calling for service REST AURANT _____________________________ LOCA TION _______________ INST ALLA TION DA TE ________________________ TECHNICIAN _____________ SER VICE COMP ANY __________________________________________________ ADDRESS ___________________________ ST A TE ______ ZIP___ ...

  • Wells Bulit-In Electric Griddles - page 14

    WELLS MANUFACTURING COMPANY 2 ERIK CIRCLE, P . O. Box 280 Verdi, NV 89439 Customer Service (775) 345-0444 Ext. 502 fax: (775) 345-0569 www.wellsbloomfield.com ...

Manufacturer Wells Category Griddle

Documents that we receive from a manufacturer of a Wells Bulit-In Electric Griddles can be divided into several groups. They are, among others:
- Wells technical drawings
- Bulit-In Electric Griddles manuals
- Wells product data sheets
- information booklets
- or energy labels Wells Bulit-In Electric Griddles
All of them are important, but the most important information from the point of view of use of the device are in the user manual Wells Bulit-In Electric Griddles.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Wells Bulit-In Electric Griddles, service manual, brief instructions and user manuals Wells Bulit-In Electric Griddles. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Wells Bulit-In Electric Griddles.

Similar manuals

A complete manual for the device Wells Bulit-In Electric Griddles, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Wells Bulit-In Electric Griddles by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Wells Bulit-In Electric Griddles.

A complete Wells manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Wells Bulit-In Electric Griddles - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Wells Bulit-In Electric Griddles, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Wells Bulit-In Electric Griddles, that we can find in the current document
3. Tips how to use the basic functions of the device Wells Bulit-In Electric Griddles - which should help us in our first steps of using Wells Bulit-In Electric Griddles
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Wells Bulit-In Electric Griddles
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Wells Bulit-In Electric Griddles in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Wells Bulit-In Electric Griddles?

Use the form below

If you did not solve your problem by using a manual Wells Bulit-In Electric Griddles, ask a question using the form below. If a user had a similar problem with Wells Bulit-In Electric Griddles it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)