Manual Teac 9A10001300 CR-H250

40 pages 1.43 mb
Download

Go to site of 40

Summary
  • Teac 9A10001300 CR-H250 - page 1

    9A10001300 CR-H250 OWNER’S MANUAL CD/Receiver Micr o-System Z ...

  • Teac 9A10001300 CR-H250 - page 2

    2 Contents Thanks you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Compact Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Connecting ...

  • Teac 9A10001300 CR-H250 - page 3

    3 Compact Disc Discs which can be played on this unit: • Conventional audio CDs bearing the CD-DA logo on the label: • Properly finalized CD-R and CD-RW discs Note: < Depending on the quality of the disc and/or the condition of the recording, some CD-R/CD-RW discs may not be playable. < Copy-protected discs and other discs which do not co ...

  • Teac 9A10001300 CR-H250 - page 4

    4 Connections SUBWOOFER SPEAKER A B LINE IN Speaker Connections Caution: < To avoid damaging the speakers by inputting a sudden high-level signal, be sure to switch the power off before connecting the speakers. < Check the impedance of your speakers. Connect speaker with an impedance of 6 ohms or more. < The amplifier’s red speaker termi ...

  • Teac 9A10001300 CR-H250 - page 5

    5 REMOTE CONTROL C LINE OUT LINE IN R L R L Cassette Deck (R-H300mk @ ) MD, CD-R, etc. R L R L LINE OUT L R VCR, DVD, etc. F LINE OUT DIGITAL IN (OPTICAL) LINE IN E D AC Power Cord Plug this AC power cord into an AC wall socket. REMOTE CONTROL jack < You can use the system remote control unit RC- 956 (provided with this unit) to operate TEAC R- ...

  • Teac 9A10001300 CR-H250 - page 6

    6 Connecting Antennas (AM/FM) < If the AM loop antenna provided does not deliver sufficient reception (often due to being too far from the transmitter or in a concrete building, etc.), it may be necessary to use an outdoor AM antenna. Use either a high quality commercial AM antenna or, if not available, an insulated wire more than 5 m long, stri ...

  • Teac 9A10001300 CR-H250 - page 7

    7 Connecting Antennas (DAB) DAB Indoor Antenna Connect the T-type DAB antenna to the DAB socket, extend the lead vertically and attach it to a window frame or wall with thumbtacks, or the like, where reception is best. < You can check the antenna adjustment or positioning for the best reception by viewing the signal strength on the display. The ...

  • Teac 9A10001300 CR-H250 - page 8

    8 Names of Each Control 1 Q P O N M L K J I H G F B A D E C Remote Sensor When operating the remote control unit, point it towards the remote sensor. Display Disc tray OPEN/CLOSE ( L ), AUTO TUNING In CD mode, use this button to open and close the disc tray. In DAB mode, press this button to activate auto location of all available DAB services. Pre ...

  • Teac 9A10001300 CR-H250 - page 9

    9 PAUSE ( J ), FUNCTION, FM MODE In CD mode, use this button to pause playback. In DAB mode, activates features such as station order, manual tune, DRC value, SW version indication, signal error rate. It is also possible to ‘tidy’ the station list to remove stations which are in the memory but have no service provided. In FM mode, use this butt ...

  • Teac 9A10001300 CR-H250 - page 10

    Names of Each Control 2 INFO, RDS In DAB mode, this button is used to change the text content on the second line of the display, to show DLS (Dynamic Label Segment, info text supplied by each radio station), Programme type (classification given by the radio station ie: Pop music or Rock), Multiplex name (name of multiplex broadcaster), Time & d ...

  • Teac 9A10001300 CR-H250 - page 11

    BAND In TUNER mode, use this button to select FM, AM or DAB. SKIP ( . / / ) In CD mode, use these buttons to skip tracks. PLAY ( y ) In CD mode, use this button to start playback. PAUSE ( J ) In CD mode, use this button to pause playback Input selector Use these buttons to select a sauce. SLEEP Use this button to set the sleep timer. VOLUME Use the ...

  • Teac 9A10001300 CR-H250 - page 12

    12 A B C How to select CD/TAPE Every time the CD/TAPE button is pressed, the mode is changed as follows: A Basic Operation How to select TUNER/AUX 1/2 Every time the TUNER/AUX 1/2 button is pressed, the mode is changed as follows: B Adjust the volume To protect speakers from a sudden high-level signal, gradually turn up the volume to the required l ...

  • Teac 9A10001300 CR-H250 - page 13

    Bass control This control is used for adjusting the level of the low frequency sound range. Treble control This control is used for adjusting the level of the high frequency sound range. Balance control This control is used for adjusting balance of the volume level between the left and right channels. Dimmer control This control can be used to dim ...

  • Teac 9A10001300 CR-H250 - page 14

    14 Listening to CDs Press the OPEN/CLOSE button ( L ). 2 Place a disc on a tray with the printed surface up. 3 Press the OPEN/CLOSE button ( L ) to close the tray. The total number of the tracks and total play time of the disc is displayed. 4 Press the G (PLAY) button. Playback starts from the first track. 5 Press the CD/TAPE button to select ‘CD ...

  • Teac 9A10001300 CR-H250 - page 15

    15 To stop playback Press the H (STOP) button to stop playback. A A B C D To suspend playback temporarily (pause mode) Press the J (PAUSE) button. Playback stops at the current position. To resume playback, press the G (PLAY) button or J (PAUSE) button. B To skip to the next or a previous track Press the .m or ,/ button several times until the desi ...

  • Teac 9A10001300 CR-H250 - page 16

    16 Programmed Playback Press the PROGRAM/MEMORY button in the stop mode. 1 Select the desired track by pressing the . or / (SKIP) button and press the PROGRAM/ MEMORY button to enter. 2 Repeat this step to store other tracks. < If you attempt to program more than 32 tracks, ‘FULL’ is displayed and no more can be programmed. < This functio ...

  • Teac 9A10001300 CR-H250 - page 17

    T o clear the program 1. In the stop mode, press the PROGRAM/MEMORY button. 2 . Hold down the CLEAR button for more than 2 seconds. < If the OPEN/CLOSE button is pressed, the programmed contents will also be cleared. T o add a track to the program In the stop mode, press the PROGRAM/MEMORY button repeatedly until the program number you want to i ...

  • Teac 9A10001300 CR-H250 - page 18

    18 Repeat Playback Repeat All [Ra] All the tracks of the selected disc will be played repeatedly. Repeat A-B This function allows repeat playback of any desired portion of the disc. 1 . Designate the point at which repeat playback should start by pressing the A-B button. ‘Rs’ blinks. 2. When the point at which repeat playback should end is reac ...

  • Teac 9A10001300 CR-H250 - page 19

    19 Time Display Each time the TIME button is pressed during playback,the display changes as follows:. elapsed time of the current track remaining time of the current track remaining time of the disc Listening to the Exter nal Sources You can connect external sources such as VCR deck or TV to the AUX input jacks. Press the TUNER/AUX 1/2 button to se ...

  • Teac 9A10001300 CR-H250 - page 20

    20 The following screen will display for 2 seconds. The unit will scan for broadcast services in the local area and add them to the channel list as they are found. The scan should take about 10 seconds. As channels are added to the channel list the number of channels found is displayed. After broadcast services have been found the channels are list ...

  • Teac 9A10001300 CR-H250 - page 21

    21 < To display the signal strength of a channel, press the ENTER button again. The signal strength is displayed. Press the ENTER button once again to cancel the signal strength display. < Channels are displayed in alphanumeric order in the channel list, with numbers coming first. So, stations such as 6 Music from the BBC will be listed early ...

  • Teac 9A10001300 CR-H250 - page 22

    Using Function Control 1 In DAB mode, use Function Control to set system options. There are 6 options in the function control. Station order Signal error rate Preset tune Software version DRC value Manual tune Station order Use station order to set the order in which stations are listed. There are four orders: Favourite, Alphanumeric, Active and Ti ...

  • Teac 9A10001300 CR-H250 - page 23

    Press the ENTER button. 5 Fav Station (Favourite station) As you tune in stations and listen to them the unit will memorize the top ten stations you listen to and list them at the top of the channel list. A Favourite station in the channel list has ‘ ’ displayed after the station name on the first line of the display. Alphanumeric This is the d ...

  • Teac 9A10001300 CR-H250 - page 24

    24 Sw version (Software version) This option shows the version number of the installed software. This is for information only and no adjustment is available. While listening to a DAB broadcast press the FUNCTION/FM MODE button. Press the TUNING/PRESET/TIME button until ‘Sw version’ is displayed in the second line of the display. 2 1 Using Funct ...

  • Teac 9A10001300 CR-H250 - page 25

    25 DRC value This option sets the Dynamic Range Control (DRC) value to be applied to received broadcasts. DRC is used to reduce the range between high and low volumes of audio and is sometimes applied at the broadcast source. Pop music may have a high value of DRC applied, appropriate for constantly high listening levels, while classical music broa ...

  • Teac 9A10001300 CR-H250 - page 26

    26 Manual tune This option allows you to manually tune in a channel and view a continuously updated display of the strength of the signal. This may be useful when adjusting or positioning an antenna for better reception. While listening to a DAB broadcast press the FUNCTION/FM MODE button. 1 Press the ENTER button when the channel you wish to tune ...

  • Teac 9A10001300 CR-H250 - page 27

    27 Changing Display Settings You can choose the type of information displayed in the second line of the display while listening to a DAB channel. Each time the INFO/RDS MODE button is pressed, the information is displayed as follows. Multiplex name This displays the name of the Mulitplex that is broadcasting the programme. Date and time This displa ...

  • Teac 9A10001300 CR-H250 - page 28

    28 Listening to FM/AM Selecting stations which cannot be tuned automatically (Manual tune) Select ‘Manual tune’ in step . Repeatedly press the TUNING/PRESET/TIME button until the station you want to listen to is found. Or hold down the TUNING/PRESET/TIME button until the station you want to listen to is found and release the button. FM: 50 kHz ...

  • Teac 9A10001300 CR-H250 - page 29

    FM or AM DAB ‘CH01’ or ‘01’ blinks on the display. 29 Preset T uning 1 You can store up to 30 FM, 30 AM and 10 DAB stations. Preset Manually (FM/AM/DAB) BAND TUNING/PRESET/TIME MEMORY Select DAB, AM or FM by pressing the BAND button. 1 Tune the station you would like to store. Press the PROGRAM/MEMORY button briefly. 3 2 Within 4 seconds, s ...

  • Teac 9A10001300 CR-H250 - page 30

    30 Preset T uning 2 1 3 2 < Preset channels can also be selected by the PRESET CALL buttons or the numeric buttons of the remote control unit. < When using the remote control unit, you can skip step . 2 Select a preset channel. Press the TUNING/PRESET/TIME button repeatedly until the desired preset station is found. 3 Select AM or FM by press ...

  • Teac 9A10001300 CR-H250 - page 31

    31 RDS The Radio Data System(RDS) is a broadcasting service which allows stations to send additional information along with the regular radio programme signal. RDS works on the FM waveband in Europe only. Tune in an FM station (see steps to of page 28). Press the RDS MODE button. Each time the RDS MODE button is pressed briefly, the RDS mode is cha ...

  • Teac 9A10001300 CR-H250 - page 32

    32 1 5 3 2 4 PTY Search You can search for stations by programme type. Select FM by pressing the BAND button. 1 Press the INFO/RDS MODEbutton for more than 3 second. 2 Select the desired PTY programme using the TUNING/PRESET/TIME buttons. 3 Select your desired one from among 31 kinds of PTY programmes. The programme type will blink. Press the ENTER ...

  • Teac 9A10001300 CR-H250 - page 33

    NEWS : brief announcements, events, public opinion, reports, actual situations. AFFAIRS : a kind of suggestion including practical announcements other than news, documents, discussion, analysis and so on. INFO : daily information or reference such as weather forecast, consumer guide, medical assistance and so on. SPORT : sports related programs. ED ...

  • Teac 9A10001300 CR-H250 - page 34

    34 Every time the TIME MODE button is pressed, the mode is changed as follows. < The unit uses the 24 hour ‘military’ clock. < When no action is taken for 1 minute, the time adjust mode will be cancelled. Press the TUNING/PRESET/TIME buttons to set the current hour. 2 Press the ENTER/SET button. 3 Press the TIME MODE button. 1 The ‘minu ...

  • Teac 9A10001300 CR-H250 - page 35

    35 TUNING/PRESET/TIME TIME MODE ENTER/SET Setting the Timer < Adjust the clock before setting the timer. < When no action is taken for 1 minute, the timer setting mode will be cancelled. Press the TIME MODE button repeatedly until ‘On time’ is displayed. 1 The ‘minute’ value blinks. ‘Off time’ appears on the display, and the ‘ho ...

  • Teac 9A10001300 CR-H250 - page 36

    36 How to Reset the Settings to the Factory Defaults The unit will be turned on, and all the settings are reset to the default settings. If the power supply is interrupted for 14 days or longer, all the settings kept in memory (such as preset stations and timer settings) will be erased. It will take more than 3 days after plugging the power cord in ...

  • Teac 9A10001300 CR-H250 - page 37

    37 Specifications GENERAL Power Requirements . . . . . . . . . . 230 V AC, 50 Hz Power Consumption . . . . . . . . . . . . . . . . . . . 75 W (standby) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 W Dimension (W x H x D) . . . . . .215 x 110 x 359 mm Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.4 kg Standard Access ...

  • Teac 9A10001300 CR-H250 - page 38

    38 T roubleshooting Amplifier No power e Check the connection to the AC power supply. No sound from speakers. e Check the connection to the speakers. e Adjust the volume. e Select proper source. e Pull out the headphone plug from PHONES jack. e If muting is on, press the MUTING button. The sound is noisy. e The unit is too close to a TV set or simi ...

  • Teac 9A10001300 CR-H250 - page 39

    39 CD Player Cannot play. e Load a disc with label side up. e If the disc is dirty, clean the surface of the disc. e A blank disc has been loaded. Load a prerecorded disc. e Unfinalized CD-R/CD-RW disc is not playable. Finalize the disc properly. Sound skips. e Place the unit on a stable place to avoid vibration and shock. e If the disc is dirty, c ...

  • Teac 9A10001300 CR-H250 - page 40

    0704 . MA-0906A Z This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AMERICA, INC. 7733 Telegraph Road, Montebello, California 90640 ...

Manufacturer Teac Category Car Stereo System

Documents that we receive from a manufacturer of a Teac 9A10001300 CR-H250 can be divided into several groups. They are, among others:
- Teac technical drawings
- 9A10001300 CR-H250 manuals
- Teac product data sheets
- information booklets
- or energy labels Teac 9A10001300 CR-H250
All of them are important, but the most important information from the point of view of use of the device are in the user manual Teac 9A10001300 CR-H250.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Teac 9A10001300 CR-H250, service manual, brief instructions and user manuals Teac 9A10001300 CR-H250. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Teac 9A10001300 CR-H250.

Similar manuals

A complete manual for the device Teac 9A10001300 CR-H250, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Teac 9A10001300 CR-H250 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Teac 9A10001300 CR-H250.

A complete Teac manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Teac 9A10001300 CR-H250 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Teac 9A10001300 CR-H250, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Teac 9A10001300 CR-H250, that we can find in the current document
3. Tips how to use the basic functions of the device Teac 9A10001300 CR-H250 - which should help us in our first steps of using Teac 9A10001300 CR-H250
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Teac 9A10001300 CR-H250
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Teac 9A10001300 CR-H250 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Teac 9A10001300 CR-H250?

Use the form below

If you did not solve your problem by using a manual Teac 9A10001300 CR-H250, ask a question using the form below. If a user had a similar problem with Teac 9A10001300 CR-H250 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)