Manual Avanti K-600HW

8 pages 0.16 mb
Download

Go to site of 8

Summary
  • Avanti K-600HW - page 1

    Avanti Security control panels  8 fully programmable Zones + PA and Tamper  External lighting facility to control up to 2000 watts of external security lighting  3 part set programs  Service timer (selectable)  Chime on any Zone  Entry/Exit timers programmable in one second increments (0-99 secs)  6 Communi ...

  • Avanti K-600HW - page 2

    1.8 Test & Commission. After the wiring has been completed re-connect the battery to the terminals marked Batt + - The panel will now go into alarm condition, enter user code ( 0123 ) to silence, the Tamper and Pow er will be lit and Day & Zone LED’s flashing. To reset the panel re-enter the user code and the Day & Power LED’s will ...

  • Avanti K-600HW - page 3

    3 Operation 3.1 Programs The Avanti provides the facility for up to 3 pr ograms that can be selected by entering the A , B or * keys after entering the user code when setting the system. The * program is used for Full Set. If no prog ram is selected when setting the system the Avanti will default to Program * . When setting up the programs the func ...

  • Avanti K-600HW - page 4

    4 Engineer Programming Once the engineers access code ( 9999 ) has been entered from within DAY mode, the Day LED will be extinguished , and all 8 Zone LED’s will flas h to prompt for the selecti on of the menu setting to be changed. The following is a list of configurable menus availab le within the engineers menu. • Press 1 to Set up the Prog ...

  • Avanti K-600HW - page 5

    4.2 Setting Up Zone Attributes. Set-up Zone Attributes menu is entered from the Engineers menu, by pressing Key 2 . Each of the zones has 9 Attributes that dictate its function, that are fixed rega rdless of what the program set-up has. On entering the set-up Zone Attributes menu, the Day LED will flash, along with all 8 zone LED’s. Th is is to p ...

  • Avanti K-600HW - page 6

    4.9 Test Menu. The Test Menu is entered from the Engineers menu by pressing Key 9 . The alarm panel has several test modes making life a little easier fo r the installation engineer. They are as follows: • Press 1 to switch bell drive on. • Press 2 to switch strobe drive on. • Press 3 to switch all speakers on. • Press 0 to switch all outpu ...

  • Avanti K-600HW - page 7

    5.1 Communicator Test Menu It is imperative that the system is fully tested before connecting to a communicator or STU and that the Alarm Receiving Centre (ARC) is receiving signals correctly. The Communicator Test menu is entered from the Engineers menu by pressing Key 9 (Test Menu) and then Key 4 . All zone LED’s will be switched off w ith Day, ...

  • Avanti K-600HW - page 8

    Due to continuous product development, we reserve the right, without prior notice, to alter specifications as and when required. Tel: +44 (0) 1305 853 090 Fax: +44 (0) 1305 851 660 e-mail: sales@keystone-electronics.co.uk ...

Manufacturer Avanti Category Security Camera

Documents that we receive from a manufacturer of a Avanti K-600HW can be divided into several groups. They are, among others:
- Avanti technical drawings
- K-600HW manuals
- Avanti product data sheets
- information booklets
- or energy labels Avanti K-600HW
All of them are important, but the most important information from the point of view of use of the device are in the user manual Avanti K-600HW.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Avanti K-600HW, service manual, brief instructions and user manuals Avanti K-600HW. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Avanti K-600HW.

Similar manuals

A complete manual for the device Avanti K-600HW, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Avanti K-600HW by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Avanti K-600HW.

A complete Avanti manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Avanti K-600HW - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Avanti K-600HW, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Avanti K-600HW, that we can find in the current document
3. Tips how to use the basic functions of the device Avanti K-600HW - which should help us in our first steps of using Avanti K-600HW
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Avanti K-600HW
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Avanti K-600HW in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Avanti K-600HW?

Use the form below

If you did not solve your problem by using a manual Avanti K-600HW, ask a question using the form below. If a user had a similar problem with Avanti K-600HW it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)