English dropdown-ico

Manual Zonet ZSR0104UP

51 pages Not applicable
Download

Go to site of 51

Summary
  • Zonet ZSR0104UP - page 1

    B ROADBAND F IREWALL R OUTER WITH 1-USB + 1-P ARALLEL P RINT S ERVER P ORT U SER ’ S M ANUAL V1.0 Trademarks ...

  • Zonet ZSR0104UP - page 2

    Windows 95/98/Me and Windows NT/2000/XP are registered trademarks of Microsoft Corporation. All other br ands and product names are tradem arks of their respective companies. Copyright No part of this publication ma y be reproduced in any form or by any means or used to make any derivative (such as translation, transforma tion or adaptation) withou ...

  • Zonet ZSR0104UP - page 3

    Table of Contents 1. INTRODUCTION ............................................................................................................................. 1 P RODUCT O VERVIEW .......................................................................................................................... 1 M AIN B ENEFITS ............................ ...

  • Zonet ZSR0104UP - page 4

    W INDOWS SMB P RINTING ............................................................................................................... 35 6.FIREWALL CONFIGURATION ................................................................................................... 38 O VERVIEW .......................................................................... ...

  • Zonet ZSR0104UP - page 5

    1. Introduction Product Overview Congratulations on your purchase of this Broadband Firewall Router. During the design process, we have given much thought to making th is device as convenient to use as possible. The end result is the Broadband Firewall Router that can be set up in minutes, allowing network users to access the Internet via ei ther t ...

  • Zonet ZSR0104UP - page 6

     One User’s Manual or CD (including quick guide) Network Software Requirements The Broadband Firewall Router requires one of the following types of software:  Windows 95/98/Me or Windows NT/2000/XP  Any TCP/IP-enabled systems like Mac OS and UNIX Broadband Firewall Router Embedded 4-port 10/100Mbps Switch The Broadband Firewall Router wi ...

  • Zonet ZSR0104UP - page 7

     One external DSL modem with an RJ-45 (LAN) interface  One external Cable modem with an RJ-45 (LAN) interface 3 ...

  • Zonet ZSR0104UP - page 8

    2. Hardware Inst allation Overview This chapter details the step- by-step procedure required for correct installation of the Broadband Firewall Router hardware. Topics discussed in this chapter include connecting and disconnecting the Broadband Firewall Router to and from the modem, the network, and the power unit. Preparation The following items a ...

  • Zonet ZSR0104UP - page 9

    Connecting Broadband Firewall Router to the Network 1. Connect one end of the UTP cabl e to the Broadband Firewall Router. 2. Connect the other end of the UTP cable to any network computer. 3. The connection is complete. Connecting the AC Power Adapter 1. Connect the power adapter to the Broadband Firewall Router’s AC power adapter jack. 2. Plug ...

  • Zonet ZSR0104UP - page 10

    3. Getting S tarted Overview Configuring the Broadband Firewall Router for the first time can be done using the following method: To configure the Broadband Firewall R outer uses the web browser. Note: The configuration procedures described in this chapter are for basic setup purposes only. Preparation 1. In general, using a Broadband Firewall Rout ...

  • Zonet ZSR0104UP - page 11

    Setting up the Broadband Firewall Router using the Web browser Overview We’ve designed an easy-to-use web-based configur ation interface in t he device. Users can set up the device by using the web browse r. Furthermore, the enhanced HTTP support available in the device includes a quick and easy management tool for performing the configuration ta ...

  • Zonet ZSR0104UP - page 12

    6. It then enters the Broadband Fi rewall Router main setup menu as shown in the following figure. 7. Click the Connection Setup , and the following box will appear. 8. Choose either DSL or Cable modem as your connection method. 9. Complete the following settings: (The example shown is for DSL fixed IP) Choose “ Static IP ” page, and the follow ...

  • Zonet ZSR0104UP - page 13

    Configuring Windows 95/98/Me or Windows NT/2000/XP (DHCP-capable) Computers Each PC that supports DHCP and is located on your LAN must be configured so it can communicate with the Broadband Firewall Router. Follo w these steps to configure the reset of the PCs on your LAN. (If you want to manually spec ify an IP address and related settings for the ...

  • Zonet ZSR0104UP - page 14

    5. Click Obtain an IP address automatically . 6. Click OK . 7. Click OK . 8. Restart your computer . You are now ready to use your Web br owser or other Internet applications. Configuring Broadband Firewall Router in Pre-existing IP Networks The Broadband Firewall Router is easily added to an existing network t hat already has IP addresses assigned ...

  • Zonet ZSR0104UP - page 15

    DHCP server to dynamically allocate and assign addresses (since you’ve already assigned IP addresses to each computer). The following steps use an example pre-existi ng network of computers with IP addresses 204.1.1.1 through 204.1.1.154 (IP addresses of Class C, without any IP sub-networks). Please follow the steps listed below to use your exist ...

  • Zonet ZSR0104UP - page 16

    7. In the LAN Settings , enter the IP address you se lected in Step 1 (such as 204.1.1.100) in the LAN IP Address field. 8. Enter the subnet mask 255.255.255.0 in the Subnet Mask field. 9. Enter the IP address you selected in Step 1 (such as 204.1.1.100) in the Default Gateway field. 10. Click Apply button for the new settings to take effect. 11. C ...

  • Zonet ZSR0104UP - page 17

    Configuring Non-DHCP Computers The Broadband Firewall Router can be used wit h computers that do not support DHCP. Follow these steps to identify and configure non-capable DHCP computers. 1. Determine if any computer s on your network are not DHCP capable. An example of a non-DHCP capable computer w ould be a DOS/Windows 3.x co mputer running an ol ...

  • Zonet ZSR0104UP - page 18

    2. Type the current password into Old Password . 3. Type your new password into New Passw ord . 4. Confirm the new password into Re-type New Password . 5. Click “ Apply ”. 6. The password is now set. Setting Date and Time One function of Broadband Firewall Rout er is that it allows you to set the initial time when you install the device. This e ...

  • Zonet ZSR0104UP - page 19

    Traffic Report You can view the network traffic report for the Broadband Firewall Router’s WAN port and LAN-to-Internet. Click the Basic Settings button in the top column, and then choose “ Traffic Report ”. The following box will appear. 1. Click “ WAN Port ”, and the box pictured below will appear. Please noted that your web browser hav ...

  • Zonet ZSR0104UP - page 20

     Private IP Address: User’s LAN IP.  Internet Connection: User browses Public IP.  Port No.: User’s service number. Event Log : The Broadband Firewall Router can record all in formation that you want, including “Hacker attack”, “Connection from LAN to WAN”, and “Connection from WAN to LAN”. Use the following procedure to se ...

  • Zonet ZSR0104UP - page 21

    Please follow these steps to setup “ Save & Restore CFG ” Setting. A. To “ Save ” setting: Click the “ Save ” button, it saves the current rout er’s setting to a file “CFG.BIN”. B. To “ restore ” setting: i. Click the “ Browse ” button, and select the CFG.BIN file. ii. Then, click the “ Load ” button, to restore th ...

  • Zonet ZSR0104UP - page 22

    Note: To load the default values by using the reset button, please see the Appendix . 4. Advanced Configuration Overview Once you've finished the basic setup (in C hapter 3) of the Broadband Firewall Router, the Broadband Firewall Router should be able to func tion properly. This c hapter provides the directions for configuring the Broadband F ...

  • Zonet ZSR0104UP - page 23

    Preparation: Connecting to the Broadband Firewall Router In order to proceed with the advanced configuration of t he Broadband Firewall Router, you need to have completed the Broadband Firewall Router ’s basic setup detailed in Chapter 3. 1. Open the web browser in your Windows 95/98/Me or Windows NT/2000/XP computer. 2. Type the default IP addr ...

  • Zonet ZSR0104UP - page 24

    3. You can assign a IP address group’s name to include the IP range from “Starting IP Address” to “Ending IP Address”. Service Group : 1. Click Advanced Settings in the top column. Then click Group Setup . 2. Click Service Group , and the following picture will appear. 3. You can assign a service group’s name to include any protocol and ...

  • Zonet ZSR0104UP - page 25

    Enable DHCP Server : This option allows you to enabl e or disable the Broadband Firewall Router’s DHCP feature. By default, the DHCP service of the Broadband Firewall Router is enabled . Enable DNS Relay : This option allows you to enable or disable the DNS relay feature in the router inside. Default is disable. Primary DNS IP Address : This opti ...

  • Zonet ZSR0104UP - page 26

    A. Insert the IP and MAC address. B. Click “ Add ”. C. The procedure is now completed. IP Lease Range : This option allows you to change the DHCP IP Lease Range. DMZ Setup The DMZ Host can be accessed from the public Internet via the IP address associated with the DSL/Cable service. Please follow these steps to set up the DMZ Host: 1. Click Adv ...

  • Zonet ZSR0104UP - page 27

    3. In the Enable Multiple DMZ field, choose “ Yes ”. By default, the DMZ feature of the Broadband Firewall Router is disabled . 4. In the Public (WAN) IP Address field, type the WAN IP that you want. In the Private (LAN) IP Address field, type the LAN IP of the computer you wish to make visible to the public Internet. 5. Click Apply button. 6. ...

  • Zonet ZSR0104UP - page 28

    2. Due to the nature of the NAT implemented, only one user at a time can access the same VPN server on the Internet through this device. This means that two private network users cannot access the same VPN server locate on the public Internet simultaneously. 3. For details on setting up a VPN client, pl ease refer to your system’s documentation. ...

  • Zonet ZSR0104UP - page 29

    service to a designated host that can process reques ts for a specific Internet service on your LAN. 1. Click Advanced Settings in the top column. Then click Service Setup . 2. Click Local Server Mapping , and the box below will then appear. 3. Select TCP or UDP . 4. Fill in the Public Port Number . 5. Fill in the Private IP Address of the LAN PC? ...

  • Zonet ZSR0104UP - page 30

    3. Enable DDNS: You want to use “DDNS”, or not. 4. Type username. 5. Type password. 6. Domain name: It is your domain name. 7. Mail Server’s Domain Name: It is your Mail server name. 8. Use Wildcard: You want to use “wildcard”, or not. 9. Click “Apply”. 【 Note 】 The Broadband Firewall Router only provides to apply for DDNS to www. ...

  • Zonet ZSR0104UP - page 31

    TCP/IP Protocol Installation 1. Click Start , point to Settings and select Control Panel . 2. Double click the Network icon. 3. If the TCP/IP Protocol is not already installed, click Add . 4. Select Protocol and click Add . 5. Select Microsoft from the Manufacturers list. 6. Select TCP/IP Protocol from the Network Protocols list. 7. Specify an IP a ...

  • Zonet ZSR0104UP - page 32

    3. Click Netw ork Print Server Setup Wizard . 4. Click Next , the wizard will automatically discover the print server. 28 ...

  • Zonet ZSR0104UP - page 33

    5. Select the print server port t hat you want to configure and click Next . Port 1 for Parallel port and port 2 for USB port. 6. Select No if you don’t want to change the configuration and click Next . 29 ...

  • Zonet ZSR0104UP - page 34

    7. Choose the printer, which you want to connect. Click Next . 8. Setup program will display the summary of your setting. Click Next . 30 ...

  • Zonet ZSR0104UP - page 35

    9. Installation complete. Click Finish . Windows NT LPR Port Installation 1. Click Start , point to Settings , and select Printer . 2. Run Add Printer . 31 ...

  • Zonet ZSR0104UP - page 36

    3. The Add Printer Wizard screen will appear, Select My Computer and click Next . 4. Click Add Port . 5. From the Printer Ports box as show n in the following picture, select the LPR Port . 6. The Add LPR compatible printers box will then appear as shown in the following picture. Type in the router’s IP address in the Name or address of server pr ...

  • Zonet ZSR0104UP - page 37

    4. From the type of Create a new port box as shown in the following picture, select the Standard TCP/IP Port , Click Next and Next . 5. The Add Standard TCP/IP Printer Port Wizard box will then appear as shown the picture as below, and type in t he router’s IP address in the Printer Name or IP Address box, and you can change the Port Name (option ...

  • Zonet ZSR0104UP - page 38

    6. In the Configure Standard TCP/IP Port Monitor box as shown in the following pi cture, select LPR from Protocol, type in a queue name: lp1 for Parallel Port (Port 1) or lp2 for USB Port (Port 2). 7. Click OK , and Next . Note: Please DO NOT type any other name than lp1, lp2 in this step. 8. Click Finish . 9. Select the appropriate printer manufac ...

  • Zonet ZSR0104UP - page 39

    11. A message reading, “To confirm that the printer is installed properly, you can print a test page”. Select Yes (Recommended) and click Next . 12. Click Finish . 13. Done. Windows SMB Printing 1. Click Print Server Setup in the top column, and the following box will appear. 2. Assume your computers use the “ WORKGROUP ” as the SMB workgro ...

  • Zonet ZSR0104UP - page 40

    4. Double click it again. 5. Now you have to install the printer’s driver. 6. Choose it from the “Add Printer Wizard”. 36 ...

  • Zonet ZSR0104UP - page 41

    7. Install printer successfully. 8. Now, you can find your printer’ s icon and use the SMB printing mode. 37 ...

  • Zonet ZSR0104UP - page 42

    6.Firewall Configuration Overview An Internet firewall allows approved traffic in and out according to a predetermined plan. A firewall is a safeguard security mechanism that provides protection between LAN and WAN. It protects the intranet from intrusion by out sides and hackers, thus providing a secure environment for users. The Broadband Firewal ...

  • Zonet ZSR0104UP - page 43

    9. “Allows Broadcast Packets” allows for broadcast packets by-pass. The default is “ Yes ”. 10. “Allows IP Source Routing” could protec t against a hacker using another IP to attack your network. The default is “ No ”. 11. “Enable Remote Web Management to this Router” default is “ No ”. 12. “Respond to Ping Requests” def ...

  • Zonet ZSR0104UP - page 44

    Internet (WAN) to LAN Access Rule Broadband Firewall Router could be according to administrator’s request to create WAN to LAN Access Rules. You could follow the procedure to setup it. 1. Click Advanced Settings in the top column. Then click Firewall Setup . 2. Click “ Access Rules ”, and select the direction Internet (WAN)  LAN, then it w ...

  • Zonet ZSR0104UP - page 45

    3. If you want to start up the feature, you must choose “ Yes ” in “ Enable URL Blocking ”. The default is “ No ”. 4. Fill in the URL or Key Word that you want to restrict access to. 5. Webpage Content Filtering: A. Active X: Allows or disallows the Active X packet pass-through. B. Java: Allows or disallows the Java packet pass-through. ...

  • Zonet ZSR0104UP - page 46

    4. Fill in administrator’s e-mail. 5. Fill in SMTP mail server’s IP address. 6. Click “ Apply ”. 7. The facility is now set up. 42 ...

  • Zonet ZSR0104UP - page 47

    7. Upgrading the Broadband Firewall Router Overview As new firmware for the Broadband Firewall Router is released in the future, you can upgrade your Broadband Firewall Router. The upgr ade procedure will use the DOS-based TFTP program on Windows NT/2000/XP. For Windows 95/98/Me and NT/2000/XP, we provide user upgrade firmware via your browser. Upg ...

  • Zonet ZSR0104UP - page 48

    5. Click the “ Browse ” button, and pick the firmware file. 6. Click the “ Upgrade ” button. 7. The upgrade is now completed. Upgrading the Router on UNIX (using TCP/IP) 1. Log in as root. 2. Ensure that upgrade BIN file is locat ed in your current working directory. 3. Type “ tftp <the Firewall router’s IP address> ”. 4. At the ...

  • Zonet ZSR0104UP - page 49

    8. T roubleshooting Problem A IP Address Conflicts If you start up your Windows 95/98/Me or Windows NT/2000/XP computer and the following message dialog box shows — indicating an IP addr ess conflict — please follow the directions given below. Solution Windows 95/98/Me 1. Click Start , point to Run , and type winipcfg . When done, click the Run ...

  • Zonet ZSR0104UP - page 50

    4. Click OK. 5. Done. Windows NT/2000/XP 1. At your NT’s DOS prompt, type ipconfig /release and press [ Enter ]. 2. Next, type ipconfig /renew and press [ Enter ]. 3. The conflict should now be resolved. 46 ...

  • Zonet ZSR0104UP - page 51

    47 Appendix Loading the Default Values Once you have configured the Broadband Firewa ll Router (see Chapters 3 and 4), the configuration settings are saved in the Broadband Firewall Router’s internal memory. However, you can manually reset them to fact ory defaults by using the web browser or by following the steps given below: 1. Power off and o ...

Manufacturer Zonet Category Router

Documents that we receive from a manufacturer of a Zonet ZSR0104UP can be divided into several groups. They are, among others:
- Zonet technical drawings
- ZSR0104UP manuals
- Zonet product data sheets
- information booklets
- or energy labels Zonet ZSR0104UP
All of them are important, but the most important information from the point of view of use of the device are in the user manual Zonet ZSR0104UP.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Zonet ZSR0104UP, service manual, brief instructions and user manuals Zonet ZSR0104UP. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Zonet ZSR0104UP.

Similar manuals

A complete manual for the device Zonet ZSR0104UP, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Zonet ZSR0104UP by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Zonet ZSR0104UP.

A complete Zonet manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Zonet ZSR0104UP - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Zonet ZSR0104UP, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Zonet ZSR0104UP, that we can find in the current document
3. Tips how to use the basic functions of the device Zonet ZSR0104UP - which should help us in our first steps of using Zonet ZSR0104UP
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Zonet ZSR0104UP
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Zonet ZSR0104UP in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Zonet ZSR0104UP?

Use the form below

If you did not solve your problem by using a manual Zonet ZSR0104UP, ask a question using the form below. If a user had a similar problem with Zonet ZSR0104UP it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)