English dropdown-ico

Manual SMC Networks 10/100 Mbps

54 pages 1.02 mb
Download

Go to site of 54

Summary
  • SMC Networks 10/100 Mbps - page 1

    Fast Ethernet PCI 10/100 Mbps PCI Adapter with Firewall Protection  Plug-and-play ins tallation  Remote LAN W akeup support  On-board socket for optional B oot R OM  Auto-negotiation of speed and duplex mode  Lo w po w er consumptio n  A CPI and OnNow/PC 98/99 co mpli ant  SMC EtherGuard (personal fi rewall) and WiNeTool (perso ...

  • SMC Networks 10/100 Mbps - page 2

    ...

  • SMC Networks 10/100 Mbps - page 3

    38 T esla Irvine, CA 92618 Phone: (949) 679 -8000 Fast Ethernet PCI User Guide From SMC ’ s Fast Ethernet l i ne of aw ard- w inn i ng w or k gr o up LAN sol u ti o ns June 2002 Pub. No:15000002 6800A Part No: 01-111337 -006 ...

  • SMC Networks 10/100 Mbps - page 4

    Copyright Infor mation fur nished by SMC Networks , Inc. (SMC) is believed to be accurate and reliable. However , no responsibility is assumed by SMC for its use, nor for any in fringements o f patents or other rights of th ird parties which ma y result from its use. No li cense is g ranted by impli cation or otherwise under any patent or patent ri ...

  • SMC Networks 10/100 Mbps - page 5

    i L IMITED W ARRANTY Limited W ar ranty Statement: SMC Netw orks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials , under nor mal use and ser v ice, for the applicable warranty ter m. All SMC products car ry a standa rd 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller ...

  • SMC Networks 10/100 Mbps - page 6

    L IMITED W AR RANTY ii WARRANTIES EX CLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS W ARR ANTED ABO VE, CUSTOMER’S SOLE REMEDY SHALL BE REP AIR OR REPLA CEMENT OF THE PRODUCT IN QUESTION , AT SMC’S OPTION . THE FOREGOING W ARRANTIES AND REMEDIES ARE EXCL USIVE AND ARE IN LIEU OF ALL OTHER W ARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED , EITHER I ...

  • SMC Networks 10/100 Mbps - page 7

    iii C OMPLIANCES FCC - Class B This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to P art 15 of the FCC R ules. These limits are designed to prov ide reasonable protection against har mful interference in a residential installation. This equipment generates, uses and can radiate radio frequen ...

  • SMC Networks 10/100 Mbps - page 8

    C OMPLIANCES iv EC Confor mance Declaration - Class B SMC contact fo r these product s in Europe is: SMC Netw orks Europe, Edificio Conata II, Calle Fructuós Gelaber t 6-8, 2 o , 4 a , 08970 - San t Joan Despí, Barcelona, Spain. This information technology equipment complies with the requirements of the Council Directive 89/336/EEC on the Approxi ...

  • SMC Networks 10/100 Mbps - page 9

    v T ABLE OF C ONTENTS About the Fast Ethernet PC I . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hardware Descr iption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 LED Indicators . . . . . . . . ...

  • SMC Networks 10/100 Mbps - page 10

    vi Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Cable and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Twisted-Pair Cable and Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . 39 Specifications . . . . . . . . . . . . . . . . . . . . . . . . ...

  • SMC Networks 10/100 Mbps - page 11

    1 A BOUT THE Fast Ethernet PCI SMC ’ s Fast Ethernet PCI, SMC1255T X -P F , is a dual-speed card for PCI local bus-compliant computers . A tr ue plug-and-play device, this card is auto-configurable upon pow er up and also supports auto-negotiation to automatically select the optimu m speed and co m m unicat i o n m o d e of an atta c h e d de v i ...

  • SMC Networks 10/100 Mbps - page 12

    A BO U T T H E Fast Ethernet PCI 2 Features and Benefits ◆ Compatible with IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet standards ◆ Auto-negotiation selects 10/100 Mbps and full/half duplex for up to 200 Mbps of bandwidth ◆ Automatic configuration using the computer’ s BIOS setup prog ram ◆ Supports Remote LAN W akeup for efficient c ...

  • SMC Networks 10/100 Mbps - page 13

    H ARDWARE D ESCRIPTION 3 Hardware Description T h e Fast Ethernet PCI is e q uipp e d with: • 1 RJ-45 connector for 10/100 Mbps connections • 1 3-pin connector for Wake-On-LAN cable • 1 Socket for optional boot ROM •1 L E D i n d i c a t o r T he components of the Fast Ethernet PCI are sh o wn in the figure bel o w: W ake-On-LAN Connector O ...

  • SMC Networks 10/100 Mbps - page 14

    A BO U T T H E Fast Ethernet PCI 4 LED Indicators The Fast Ethernet PCI in c l u d es one status LED in d i cator, as d e scribed in the following figure and table. Status Color Description On Amber Indicates a valid 10B ASE-T link Flashing Indicates 10 Mbps net work activity On Green Indicates a valid 100BASE-TX link Flashing Indicates 100 Mbps ne ...

  • SMC Networks 10/100 Mbps - page 15

    H ARDWARE D ESCRIPTION 5 Remote LAN Wakeup Remote LAN W akeup capability is a key feature of a centrally manag ed PC environment. This technology enables networked PCs to be “w oken up” from a sleep or powered-off s t ate so they can be managed from a central location, at any time of the day or night. T o employ Remote LAN W akeup , three eleme ...

  • SMC Networks 10/100 Mbps - page 16

    6 I NSTALLATION Equipment Checklist A f ter unpa c king the Fast Ethernet PCI card, c he c k the contents of the b o x to be sure you ha ve receiv ed the following components: • Fast Ethernet PCI card SMC1255TX-PF •W a k e - O n - L A N c a b l e •O n e C D w i t h : - D r i v e r s for t h e SMC Fast Ethernet PCI A d apt e r - EtherGuard Fir ...

  • SMC Networks 10/100 Mbps - page 17

    H ARDWARE I NSTALLATION 7 Hardware Installation Network cards are sensiti ve to static electr icity. To protect the card, avoid touching its electrical components and always touch the metal chassis of your computer before handling the card. 1. Switch off the computer , unplug the pow er cord, and remov e the computer’ s cover . 2. Select an unuse ...

  • SMC Networks 10/100 Mbps - page 18

    I NSTALLATION 8 4. Attach the W ake-On-LAN cable (optional). If you require W ake-On-LAN capability from a pow ered-off state, attach one end of the 3-pin W ake-On-LAN cable to the connector on the top edg e of the card, and the other end to the “5 V Standb y” connector on the computer’ s motherboard. Refer to your computer’ s installation ...

  • SMC Networks 10/100 Mbps - page 19

    D RIVER I NSTALLATION 9 Driver Installation T h e SMC C D - R OM that a c co m p ani e s the PCI card c ontains all the netwo rk operating system drivers s upported by this card. Please read the “RELEASE.TXT” file on the CD for a list of all driv ers. Also , a text file is included with each driv er to detail the proper installation procedure. ...

  • SMC Networks 10/100 Mbps - page 20

    I NSTALLATION 10 2. Click “Next. ” 3. Check “Specify a location, ” and click “Next. ” ...

  • SMC Networks 10/100 Mbps - page 21

    D RIVER I NSTALLATION 11 4. Insert the attached CD-ROM into your CD driv e, and type E: (assuming E: is the location of y our CD driv e), click “Browse . ” 5. On the CD-ROM, go to the “Driv er” folder and choose the folder for your operating system. Then click “Open. ” ...

  • SMC Networks 10/100 Mbps - page 22

    I NSTALLATION 12 6. Click “OK” to install the driver . 7. A ‘Digital Signature Not F ound” screen will warn you that the software does not contain a Microsoft digital signature and ask you if you wish to contin ue the installation. Click “Y es”. 8. On the “Completing the F ound New Hardware Wizard” screen, click “Finish” to comp ...

  • SMC Networks 10/100 Mbps - page 23

    S OFTWARE I NSTALLATION 13 Software Installation EtherGuard is a P e rsonal Firew all to guard your computer , your c hildren, your emplo yees, and y ourself ag ainst network and Internet intr usions . WiNeT ool provides netw ork adapter infor mation, g enerates specified packets , captures pack ets, and analyses network traffic . Both the EtherGua ...

  • SMC Networks 10/100 Mbps - page 24

    14 3. Click “Next” 4. Click “Y es” to ag ree to the lic ense statement. An information screen will open showing the minimum system requirements needed to r un the EtherGuard program. ...

  • SMC Networks 10/100 Mbps - page 25

    15 5. If your syste m meets the requirem ents , click “Next”. 6. On the “Choose Destination Location” screen, clic k “Browse” to install the prog ram files into a folder other than the default, or click “Next” to install to the de fault folder shown on the screen. ...

  • SMC Networks 10/100 Mbps - page 26

    I NSTALLATION 16 7. Choose the location where the prog ram icons will be located and click “Next”. 8. Check the “T o launch EtherGuard” box and cl ick “Finish” to complete the installation and launch the EtherGuard prog ram. The EtherGuard prog ram may also be started by clic king “Start/ Prog rams/EtherGuard/Etherguard”. T he prog ...

  • SMC Networks 10/100 Mbps - page 27

    S OFTWARE I NSTALLATION 17 EtherGuard EtherGuard monitors both outg oing and incoming data to protect y our children, y our employees , and yourself against network and Internet intr usions . 1. The prog ram opens with the EtherGuard “W elcome” screen. 2. The screen c ontains four main menu items . The sam e menu items are also av ailable from ...

  • SMC Networks 10/100 Mbps - page 28

    I NSTALLATION 18 4. Click “Modify P assword”. 5. The default EtherGuard password setting is blank (no passw ord required) so enter your passw ord in the “New P assword” field and then again in the ‘Confir m Passw ord” field. Cli ck “OK”. 6. As you attempt to open eac h menu item, enter your passw ord if required. 7. Click “Enable? ...

  • SMC Networks 10/100 Mbps - page 29

    19 8. Click “Statistic” to view possible in tr uder activity . 9. The ‘Statistic Information” screen indicates t he intr uder’ s IP address a n d the type of a tt a c k th a t w a s a ttemp t e d. 10. Click “ Adv ance” to set adv anced filter co ntrols . T he “Filter Items Setting I” scre e n w i ll op e n. 11. Checking “Name fo ...

  • SMC Networks 10/100 Mbps - page 30

    I NSTALLATION 20 up to 20 sites . T o dele te an address, select it in the “Filter List” and click “Delete”. Note: When you input a site name , do not include “http://”. 13. Click the “Setting II” button. 14. Check the bo x in the “Filter Items II” section to enable the desired filter(s). 15. The IP address pag e allows y ou to ...

  • SMC Networks 10/100 Mbps - page 31

    21 16. Y ou may also filter up to 20 specified TCP and UDP ports (see figures abov e and below). F or a full list of por ts and the ser vices that r un on them, see www .iana.org/assignments/port-numbers . ...

  • SMC Networks 10/100 Mbps - page 32

    I NSTALLATION 22 17. Check the bo xes on the “Protocol Filter” page to block particular protocols . 18. Once you hav e enabl ed the filters and completed your settings, clic k “Close”. 19. Close and re-launch y our web browser to allo w the new settings to take affect . ...

  • SMC Networks 10/100 Mbps - page 33

    S OFTWARE I NSTALLATION 23 WiNeTool WiNeT ool provides netw ork adapter infor mation, g enerates specified packets , captures packets , and analyzes network traffic . WiNeT ool also generates wake-up packets . After installation the prog ram will place an icon in the toolbar . Double-click the icon to open the program. The WiNeT ool prog ram may al ...

  • SMC Networks 10/100 Mbps - page 34

    I NSTALLATION 24 Configuration The WiNeT ool opens with the “Configuration” page. Here y ou may view the cur rent configuration for this adapter. If required, click “Help” for access to the HTML help files . Configuration TX/RX Information MAC Address The Media Access Co ntrol Address of this adapter. Transmit One Collision Number of fram e ...

  • SMC Networks 10/100 Mbps - page 35

    S OFTWARE I NSTALLATION 25 Send Packet Sends fixed length packets in the default pattern at one of two speeds , Nor mal mode or Tu rbo mode. The value of packets/sec depends on the computer perfor mance. H: M: S: Indicates hours, minutes, seconds of time the WiNeTool has b een sending packets. Reset, OFF, ON Resets, Stops, Starts sending packets. N ...

  • SMC Networks 10/100 Mbps - page 36

    I NSTALLATION 26 Packet Generator The “Pac ket Generator” allows y ou to send packets with a defined mode, length, and pattern. The Ar row icons allow you to navig ate forward and backward through the pages. Send Mode If “Continue ” is checked, t he WiNeTool will ke ep sending packet s until “OFF” is pressed on the main “Send Packet? ...

  • SMC Networks 10/100 Mbps - page 37

    S OFTWARE I NSTALLATION 27 Send ACPI Packet Sends an A CPI (Advanced Configuration and P ow er Interface) packet to wak e up a sleeping computer . Magic Packet Input the MAC address of the sl eeping computer you wish to wake up and click “S end’. Click “Clear” to cle ar the box and input a new figu re. Wakeup Fram e Input the IP address of ...

  • SMC Networks 10/100 Mbps - page 38

    I NSTALLATION 28 Receive Packet - Guage ON/OFF power socket icon Starts/Stops the mo nitor function. Packets/S Max. Number of received packets pe r second. Utilization % Sets the interval between two contiguous packets . Errors /s Number of CRC errors generated per second. Analysis button Advanced capture and ana l ysis settings. ...

  • SMC Networks 10/100 Mbps - page 39

    S OFTWARE I NSTALLATION 29 Capture Console Toolbar Click “ Analysis” to open the capture console . Start Starts the capture function . You must set filters using the “Set” bu tton before capturin g. Stop St ops the capture function . Stop & View Stops the capture func tion and opens the “Analysis Packet” screen . View Opens the “A ...

  • SMC Networks 10/100 Mbps - page 40

    I NSTALLATION 30 Filter Setting - MAC Address Sets the MA C address of computers (sta tions) as filtering criteria. Y ou must enter a 12 cha racter MA C address in the Station 1 and Station 2 fields (or enter “any”). Click on the arrow symbols in the direction column to set the direction of the pack et flow to be captured. ...

  • SMC Networks 10/100 Mbps - page 41

    S OFTWARE I NSTALLATION 31 Filter Setting - IP Address Sets the IP address of computers (st ations) as filtering criter ia. Enter an IP address in the Station 1 and Station 2 fields (o r enter “any”). Click on the ar row symbols in the direction column to set the direction of the packet flow to be captured. Filter Setting - Protocol Sets protoc ...

  • SMC Networks 10/100 Mbps - page 42

    I NSTALLATION 32 Filter Setting - Pattern Sets the pattern and position as filtering criteria. Note: Note: in the abo ve example, “11 22 33 44 55 66 99 DD” is at byte position 0x23. Therefore, WiNeT ool will only capture a packet with th e same patter n (11 22 33 4 4 55 66 99 DD) in the same position. Filter Setting - Buffer Size Set the hard d ...

  • SMC Networks 10/100 Mbps - page 43

    S OFTWARE I NSTALLATION 33 Packet Analysis The packet Analysis screen features three windows: The top window giv es basic infor mation on captured packets , including which layer the packets belong to . The center window shows detailed data on each layer . The lower window sho ws the HEX and ASCII code related to the selected data in the top window ...

  • SMC Networks 10/100 Mbps - page 44

    I NSTALLATION 34 Receive Packet - Detail The “Detail” pag e provides detailed network information and shows the packet size distributuion, i.e, n umber of Bytes with a size up to 64 Bytes , number of Bytes with a size of 65 to 127 Bytes , etc. ...

  • SMC Networks 10/100 Mbps - page 45

    35 T ROUBLESHOOTING PCI Compatibility Early PCI BIOS ve rsions do not properly suppor t the PCI specifications and ma y “hang” when a netw ork card dri ver tries to load. If this occurs, make sure y our BIOS cor rectly suppor ts the PCI Local Bus Specifications (v2.0 or later) and upgrade your co mputer BIOS to the latest vers ion. Some PCI com ...

  • SMC Networks 10/100 Mbps - page 46

    T R OUBLESHOOTING 36 the network card is installed. Ensure that the slot is configured for level-triggered interrupts instead of edge-triggered interrupts. An example of typical PCI parameters follows: PCI Slot #: ( slot number where the network card is installed ) Master: Enabled Slave: Enabled Latency Timer: 40 (range is 20 to 255) Interrupt Type ...

  • SMC Networks 10/100 Mbps - page 47

    S OLUTIONS FOR C OMMON P RO B LE MS 37 Solutions for Common Problems Problems are often caused b y cabling er rors, conflicts with other devices installed in the same computer , or software that has been configured incorrectly . If you e ncounter a problem with the network card, use the following checklists to identify and c or rect the problem. Ne ...

  • SMC Networks 10/100 Mbps - page 48

    T R OUBLESHOOTING 38 Network Connection Problems There may be a network connection problem if the LED on the card’ s brack e t does not light, or if you cannot access any netw ork resources from the computer . Check the following items before contacting SMC T e chnical Support. • Be sure you are using Category 5 cable for 100 Mbps connections, ...

  • SMC Networks 10/100 Mbps - page 49

    39 C ABLE S PECIFICATIONS Cable and Specifications Twisted-Pair Cable and Pin Assignments Do NOT plug a phone jac k connector into any RJ-45 port. Use only twisted-pair cables with RJ-45 connectors that conform with FCC standards . F or 10BASE-T/100B ASE-TX connections , a twisted-pair cable must have two pairs of wires. Eac h wire pair is identifi ...

  • SMC Networks 10/100 Mbps - page 50

    C ABLE S PECIFICATIONS 40 The figure below illustrates how the pins on the RJ-45 connector are numbered. Be sure to hold the connectors in the same orientation when attaching the wir e s to the pins . With 10B ASE-T/100BASE-TX cable, pins 1 and 2 are used for transmitting data, and pins 3 and 6 for receiv ing data. The “+” and “-” signs in ...

  • SMC Networks 10/100 Mbps - page 51

    41 S PECIFICATIONS Por t 1 RJ-45 for 10BASE-T and 100B ASE-TX Host Interface PCI Bus compliant to PCI spec . 2.2 LED Link, Speed, Activity Data Bus Access 32-bit bus mastering Size (wi thout bracket) 120 x 43 mm (4.72 x 1.69 in) We i g h t 47 g (1.66 oz) Po wer Requirements 5 VDC , 125 mA (typical) Te m p e r a t u r e Operating: 0 to 55 °C (32 to ...

  • SMC Networks 10/100 Mbps - page 52

    S PECIFICATIONS 42 Compliances FCC Class B V CCI Class B CE Mark CISPR 22 Class B Wa r r a n t y Limited lifetime NetW ar e ODI Driv er s Nov ell NetW are 3.1X to 6.0 Netware Lan W orkPlace Nov el l DOS Client Nov el l Lan Analyzer Ser ver 3.1x to 5.x Unix Driv er s Linux Fre eB S D SCO Unix 5.0x, 7.x NDIS Driv er s Windows 95 OSR2 Windows 98 Windo ...

  • SMC Networks 10/100 Mbps - page 53

    ...

  • SMC Networks 10/100 Mbps - page 54

    38 T esla Irvine, CA 92618 Phone: (949) 679-8 000 Model Numbers: SMC1255TX- PF Pub . No: 150000026800A E062002-R01 Part No: 01-1 11337-006 FOR TECHNICAL SUPPOR T , CA LL: From U.S.A. and Canada (2 4 hours a day , 7 days a week) (800) SMC-4-Y OU; (949) 679-8000 ; Fax: (949) 679- 1481 From Europe (8:00 AM - 5:30 PM UK T ime) 44 (0) 118 974 8700; Fax ...

Manufacturer SMC Networks Category Network Card

Documents that we receive from a manufacturer of a SMC Networks 10/100 Mbps can be divided into several groups. They are, among others:
- SMC Networks technical drawings
- 10/100 Mbps manuals
- SMC Networks product data sheets
- information booklets
- or energy labels SMC Networks 10/100 Mbps
All of them are important, but the most important information from the point of view of use of the device are in the user manual SMC Networks 10/100 Mbps.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals SMC Networks 10/100 Mbps, service manual, brief instructions and user manuals SMC Networks 10/100 Mbps. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product SMC Networks 10/100 Mbps.

Similar manuals

A complete manual for the device SMC Networks 10/100 Mbps, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use SMC Networks 10/100 Mbps by users. Manuals are usually written by a technical writer, but in a language understandable to all users of SMC Networks 10/100 Mbps.

A complete SMC Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual SMC Networks 10/100 Mbps - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the SMC Networks 10/100 Mbps, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the SMC Networks 10/100 Mbps, that we can find in the current document
3. Tips how to use the basic functions of the device SMC Networks 10/100 Mbps - which should help us in our first steps of using SMC Networks 10/100 Mbps
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with SMC Networks 10/100 Mbps
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of SMC Networks 10/100 Mbps in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning SMC Networks 10/100 Mbps?

Use the form below

If you did not solve your problem by using a manual SMC Networks 10/100 Mbps, ask a question using the form below. If a user had a similar problem with SMC Networks 10/100 Mbps it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)