Manual Sharp XL-DK257NH

40 pages Not applicable
Download

Go to site of 40

Summary
  • Sharp XL-DK257NH - page 1

    2008/June/13 XL-DK227NH/DK257NH_AUS MICR O COMPONENT SYSTEM XL-DK227NH Micro component system consisting of XL-DK227NH (main unit) and CP-DK227NH (speaker system). XL-DK257NH Micro component system consisting of XL-DK257NH (main unit) and CP-DK257NH (speaker system). The illustration printed in this operation manual are f or the model XL-DK227NH. M ...

  • Sharp XL-DK257NH - page 2

    1 XL-DK257NH XL-DK227NH 2008/June/13 XL-DK227NH/DK257NH_AUS ENGLISH Important Instruction Special notes WARNINGS  When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote cont ...

  • Sharp XL-DK257NH - page 3

    XL-DK257NH XL-DK227NH 2 2008/June/13 XL-DK227NH/DK257NH_AUS General Information Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Special Note Supply of this product does not convey a license nor imply any ...

  • Sharp XL-DK257NH - page 4

    3 2008/June/18 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH General Information Precautions  General  Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipment.  Do not place anything on top of the unit.  Do not ...

  • Sharp XL-DK257NH - page 5

    XL-DK257NH XL-DK227NH 4 2008/June/13 XL-DK227NH/DK257NH_AUS General Information Controls and indicators  Front panel Reference page 1. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2. On/Stand-by Button . . . . . . . . . . . . . . . . . . 11, 12, 17, 23, 30 3. Disc T ray Open/Close Button . . . . . ...

  • Sharp XL-DK257NH - page 6

    5 2008/June/18 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH General Information Controls and indicators (continued)  Rear panel Reference page 1. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3. FM 75 Ohms Aerial Soc ...

  • Sharp XL-DK257NH - page 7

    XL-DK257NH XL-DK227NH 6 2008/June/25 XL-DK227NH/DK257NH_AUS General Information  Remote control Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 10 2. Disc Clear/Dimmer , iP od Men u Button . . . . . . . . . . . . . 16, 20 3. Memory, iPod Enter Button . . . . . . . . . . 12, 16, 20, 24, 30, 32 4. Disc ...

  • Sharp XL-DK257NH - page 8

    7 2008/June/13 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH Preparation for Use System connections Right speaker FM aerial Wall socket (AC 220 - 240 V ~ 50 Hz) Left speaker AM loop aerial  AC power connection (see page 9)  Aerial connection (see page 8)  Speaker connection (see page 8) Make sure to unplug the AC power lead before making an ...

  • Sharp XL-DK257NH - page 9

    XL-DK257NH XL-DK227NH 8 2008/June/13 XL-DK227NH/DK257NH_AUS Preparation for Use  Aerial connection Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received. Supplied AM loop aerial: Connect the AM loop aerial to the AM and GND (Earth) termi ...

  • Sharp XL-DK257NH - page 10

    9 2008/June/13 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH Preparation for Use System connections (continued)  AC power connection After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the demonstration mode. Note: Unplug the AC p ...

  • Sharp XL-DK257NH - page 11

    XL-DK257NH XL-DK227NH 10 2008/June/13 XL-DK227NH/DK257NH_AUS Preparation for Use Remote control  Battery installation Precautions for battery use:  Replace all old batteries with new ones at the same time.  Do not mix old and new batteries.  Remove the batteries if the unit will not be used for long periods of time. This will prevent po ...

  • Sharp XL-DK257NH - page 12

    11 2008/June/13 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH Basic Operation General control  To turn the power on Press the ON/ST AND-BY b utton to turn the power on.  Illumination light control When the unit’ s pow er is turned on, the r ing around the volume control lights up . T o tur n on/off the light, hold down the CLEAR/DIMMER butto ...

  • Sharp XL-DK257NH - page 13

    XL-DK257NH XL-DK227NH 12 2008/June/13 XL-DK227NH/DK257NH_AUS Basic Operation Setting the clock (Remote Control only) In this example, the clock is set for the 24-hour (0:00) display. T o confirm the time display: [When the unit is in the stand-by mode] Press the CLOCK/TIMER button. The time display will appear f or about 10 seconds . [When the pow ...

  • Sharp XL-DK257NH - page 14

    13 2008/June/13 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH iPod Listening to the iPod Supported iPod models:  iPod nano (software 1.2 above)  iPod mini (software 1.2 above)  iPod (5 th generation) (software 1.3 above) (Dock connector equipped Click Wheel model)  iPod (4 th generation) (software 3.0.2 above) (Dock connector equipped Cl ...

  • Sharp XL-DK257NH - page 15

    XL-DK257NH XL-DK227NH 14 2008/June/13 XL-DK227NH/DK257NH_AUS iPod  To insert iPod adaptor 1. Press the ON/STAND-BY button to turn the power on. 2. Open the iPod docking station by pushing the area marked “ PUSH OPEN”. 3. Insert the iPod adaptor into the iPod dock and connect your iPod.  To remove iPod adaptor 1. Adaptor with tip. Hold thi ...

  • Sharp XL-DK257NH - page 16

    15 2008/June/13 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH iPod Listening to the iPod (continued)  To disconnect iPod Simply remove the iPod from the iPod dock. It is safe to do so even during playback.  Navigating the iPod menus with the remote control Note: The volume level is adjusted by pressing the VOL (+ or –) button on the main uni ...

  • Sharp XL-DK257NH - page 17

    XL-DK257NH XL-DK227NH 16 2008/June/13 XL-DK227NH/DK257NH_AUS CD or MP3/WMA disc Playback  Various iPod functions Listening to a CD or MP3/WMA disc This system can play bac k a standard CD , CD-R/RW in the CD f or mat and CD-R/RW with MP3 or WMA files, but cannot record on them. Some audio CD-R and CD-RW discs ma y not be play able due to the st ...

  • Sharp XL-DK257NH - page 18

    17 2008/June/13 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH CD or MP3/WMA disc Playback Listening to a CD or MP3/WMA disc (continued)  After the last track is pla yed, the unit will stop automatically . To remove the discs: In the stop mode, press the OPEN/CLOSE button. Caution:  Do not place two discs in one disc tra y .  Do not play dis ...

  • Sharp XL-DK257NH - page 19

    XL-DK257NH XL-DK227NH 18 2008/June/13 XL-DK227NH/DK257NH_AUS CD or MP3/WMA disc Playback  Various disc functions Notes for CD or MP3/WMA disc: Advanced CD or MP3/WMA disc playback  Direct track search By using the direct search buttons, the desired tracks on the current disc can be played. Notes:  A track number higher than the number of t ...

  • Sharp XL-DK257NH - page 20

    19 2008/June/13 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH CD or MP3/WMA disc Playback Adv anced CD or MP3/WMA disc playbac k (continued)  Repeat play Repeat play can pla y one track, all trac ks or a programmed sequence continuously . To cancel repeat play: Press the PLAY MODE button again until “ ” disappears.  Random play The trac ks ...

  • Sharp XL-DK257NH - page 21

    XL-DK257NH XL-DK227NH 20 2008/June/13 XL-DK227NH/DK257NH_AUS CD or MP3/WMA disc Playback  Programmed play You can choose up to 32 selections for playback in the order you like. To cancel the programmed play mode: Whilst in the stop mode and the “MEMORY” indicator is lit, press the CLEAR/DIMMER button on the remote control. The “MEMORY” i ...

  • Sharp XL-DK257NH - page 22

    21 2008/June/13 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH CD or MP3/WMA disc Playback MP3/WMA f older mode (only f or MP3/WMA files) T o play back MP3/WMA (Windows Media A udio) file There are many music sites on the internet that you can do wnload MP3/WMA (Windows Media A udio) music files. Follow the instructions from the website on how to ...

  • Sharp XL-DK257NH - page 23

    XL-DK257NH XL-DK227NH 22 2008/June/13 XL-DK227NH/DK257NH_AUS CD or MP3/WMA disc Playback  Procedure to pla y back MP3/WMA disc with folder mode on T o pla y back CD-R/RW . Note: If “NO SUPPORT” is displayed, it means “Copyright protected WMA file” or “Not supported playback file” is selected. 1 Press the CD button, and load an MP3/WM ...

  • Sharp XL-DK257NH - page 24

    23 2008/June/13 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH Radio Listening to the radio Auto power on function: When you press any of the following buttons, the unit turns on.  TUNER (BAND) button (main unit and remote control): The unit turns on and the “TUNER” function is activated.  / button on the main unit: The unit turns on and pl ...

  • Sharp XL-DK257NH - page 25

    XL-DK257NH XL-DK227NH 24 2008/June/13 XL-DK227NH/DK257NH_AUS Radio  Memorising a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) Note: The backup function protects the memorised stations f or a fe w hours should there be a power f ailure or the AC pow er lead become disconnected.  ...

  • Sharp XL-DK257NH - page 26

    25 2008/June/13 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH Advanced Features Using the Radio Data System (RDS) RDS is a broadcasting service which a growing number of FM stations provide. These FM stations send additional signals along with their regular programme signals. They send their station names, and information about the type of programme ...

  • Sharp XL-DK257NH - page 27

    XL-DK257NH XL-DK227NH 26 2008/June/13 XL-DK227NH/DK257NH_AUS Advanced Features  Using the Auto Station Programme Memory (ASPM) Whilst in the ASPM operation mode, the tuner will automatically search for new RDS stations. Up to 40 stations can be stored. If you have already stored some stations in memory, the number of new stations you can store w ...

  • Sharp XL-DK257NH - page 28

    27 2008/June/13 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH Advanced Features Using the Radio Data System (RDS) (continued) Notes:  The same station name can be stored in different channels.  In a certain area or during certain time periods, the station names may temporarily be different.  Notes for RDS operation If any of the following e ...

  • Sharp XL-DK257NH - page 29

    XL-DK257NH XL-DK227NH 28 2008/June/13 XL-DK227NH/DK257NH_AUS Advanced Features Notes:  If the display has stopped flashing, start again from step 2. If the unit finds a desired programme type, the corresponding channel number will flash for about 4 seconds, and then the station name will flash for 7 seconds, which will remain lit.  If you wan ...

  • Sharp XL-DK257NH - page 30

    29 2008/June/13 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH Advanced Features Using the Radio Data System (RDS) (continued) LIGHT M Classical music for general, rather than specialist appreciation. Examples of music in this category are instrumental music, and vocal or choral works. CLASSICS Performances of major orchestral works, symphonies, cham ...

  • Sharp XL-DK257NH - page 31

    XL-DK257NH XL-DK227NH 30 2008/June/13 XL-DK227NH/DK257NH_AUS Advanced Features Timer and sleep operation (Remote Control only) Timer playback: The unit turns on and plays the desired source (CD , TUNER, iP od, A UDIO IN) at a preset time. Using the once timer and daily timer in combination: For e xample, use the once timer to listen to a radio prog ...

  • Sharp XL-DK257NH - page 32

    31 2008/June/13 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH Advanced Features Timer and sleep operation (Remote Control only) (continued) 4 Within 10 seconds, press the or button to select “ONCE SET” or “DAILY SET”, and press the MEMORY button. 5 Press the or button to adjust the hour and then press the MEMORY button. The illustrations sho ...

  • Sharp XL-DK257NH - page 33

    XL-DK257NH XL-DK227NH 32 2008/June/13 XL-DK227NH/DK257NH_AUS Advanced Features Note: Checking the timer setting in the timer stand-b y mode: Cancelling the timer setting in the timer stand-by mode: Reusing the memorised timer setting: The timer setting will be memorised once it is entered. To reuse the same setting, perform the following operations ...

  • Sharp XL-DK257NH - page 34

    33 2008/June/13 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH Advanced Features Timer and sleep operation (Remote Control only) (continued) To cancel the sleep operation: Press the ON/STAND-BY button whilst “SLEEP” is indicated. To cancel the sleep operation without setting the unit to the stand-by mode, proceed as follows.  To use timer and ...

  • Sharp XL-DK257NH - page 35

    XL-DK257NH XL-DK227NH 34 2008/June/13 XL-DK227NH/DK257NH_AUS Advanced Features Auto power on function: When you press any of the following buttons, the unit turns on.  A UDIO IN button (main unit and remote control): The unit turns on and the “A UDIO IN” function is activated.  / button on the main unit: The unit turns on and playback of ...

  • Sharp XL-DK257NH - page 36

    35 2008/June/13 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH References Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre.  General  CD player  Remote cont ...

  • Sharp XL-DK257NH - page 37

    XL-DK257NH XL-DK227NH 36 2008/June/13 XL-DK227NH/DK257NH_AUS References  Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, etc.) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave th ...

  • Sharp XL-DK257NH - page 38

    37 2008/June/13 XL-DK227NH/DK257NH_AUS XL-DK257NH XL-DK227NH References Specifications As par t of our policy of continuous improv ement, SHARP reser ves the right to make design and specification changes f or product improv ement without prior notice. The performance specification figures indicated are nominal values of production units . There ...

  • Sharp XL-DK257NH - page 39

    2008/June/13 XL-DK227NH/257NH_AUS FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.au OR CALL SHARP CUSTOMER CARE 1300 135 022 SHARP CORPORATION OF AUSTRALIA PTY LTD (LOCAL CALL COSTS APPLY WITHIN AUSTRALIA) FOR LOCATION ENQUIRIES WITHIN NEW ZEALAND REGARDING YOUR LOCAL SH ...

  • Sharp XL-DK257NH - page 40

    2008/June/13 XL-DK227NH/257NH_AUS TINSEA280A WZZ 08G R KI 1 This Sharp product is warranted against faults in materials and manufacture for a period of twelve(12) months from the date of original purchase. The owner is responsible for any transportation and insurance costs if the product has to be returned for repair. This warranty does not extend ...

Manufacturer Sharp Category Hi-Fi system

Documents that we receive from a manufacturer of a Sharp XL-DK257NH can be divided into several groups. They are, among others:
- Sharp technical drawings
- XL-DK257NH manuals
- Sharp product data sheets
- information booklets
- or energy labels Sharp XL-DK257NH
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sharp XL-DK257NH.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sharp XL-DK257NH, service manual, brief instructions and user manuals Sharp XL-DK257NH. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sharp XL-DK257NH.

Similar manuals

A complete manual for the device Sharp XL-DK257NH, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sharp XL-DK257NH by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sharp XL-DK257NH.

A complete Sharp manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sharp XL-DK257NH - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sharp XL-DK257NH, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sharp XL-DK257NH, that we can find in the current document
3. Tips how to use the basic functions of the device Sharp XL-DK257NH - which should help us in our first steps of using Sharp XL-DK257NH
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sharp XL-DK257NH
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sharp XL-DK257NH in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sharp XL-DK257NH?

Use the form below

If you did not solve your problem by using a manual Sharp XL-DK257NH, ask a question using the form below. If a user had a similar problem with Sharp XL-DK257NH it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)