Manual Kodak 5500

100 pages 0.51 mb
Download

Go to site of 100

Summary
  • Kodak 5500 - page 1

    Document Scanner 5500 and 7500 Installation Questionnaire Instructions Mode Setup Software A-61074 P ar t Number 6C3944 ...

  • Kodak 5500 - page 2

    A-61074 April 1997 i T able of contents 1 Intr oduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Installation requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Installation procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Logon procedure . . . . . . . . . . . . . . ...

  • Kodak 5500 - page 3

    ii A-61074 April 1997 IA Displa y format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22 Adjoining IA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23 Batching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24 Length monitor . . . . . . . . . . . . . . . . . . . . . . . ...

  • Kodak 5500 - page 4

    A-61074 April 1997 1-1 1 Intr oduction The Kodak Digital Science ™ Mode Setup Software 5000/7000 has been developed to enable you to customize applications using the Kodak Digital Science Document Scanner 5500 and 7500. The Mode Setup Software offers a user-friendly interface which allows you to perform an initial installation or modification of ...

  • Kodak 5500 - page 5

    1-2 A-61074 April 1997 Logon procedure After the installation procedure is completed, perform the following steps to logon to the Mode Setup Software: 1. Access DOS. 2. Change the directory to correspond to the directory designated during the installation procedure. 3. Type SETUP and press Enter . The following screen appears: K OD AK DIGIT AL SCIE ...

  • Kodak 5500 - page 6

    A-61074 April 1997 1-3 Using the Mode Setup Software 5. Select Continue . 6. Press Enter. The following screen appears: Setting English Inch 1990/10/10 00:00 Soft Enabled P eriod (.) Configuration Items Displa y Language Measurement System Date F ormat T ime Format Set T ime and Date Confirmation T one V olume Confirmation T ones Fix ed Field Delim ...

  • Kodak 5500 - page 7

    1-4 A-61074 April 1997 Using the Mode Setup Software Questionnaire and Instructions Logout pr ocedure To select the Previous Menu option: — Use the arrow keys to position the highlight cursor over the Previous Menu option or press the Pagedown key to automatically position the highlight cursor over the Previous Menu option. — Press Enter . • ...

  • Kodak 5500 - page 8

    A-61074 April 1997 2-1 2 Scanner configuration items Accessing the Configuration Items Menu Setting English Inch 1990/10/10 00:00 Soft Enabled P eriod (.) Configuration Items Displa y Language Measurement System Date F ormat T ime Format Set T ime and Date Confirmation T one V olume Confirmation T ones Fix ed Field Delimiter Printer Messages V ersi ...

  • Kodak 5500 - page 9

    2-2 A-61074 April 1997 Display language Display language defines the primary display language. The default is English. The options are: English or Japanese (displayed in Katakana characters). • Select Display Language from the Configuration Items window. NOTE: Other languages may appear in the Display Language box; however, only English and Japan ...

  • Kodak 5500 - page 10

    A-61074 April 1997 2-3 Measurement system Measurement system defines the primary measurement system. The default is Inch. The options are: — Inch— uses inches as the primary unit of measure. — Milli— uses millimetres as the primary unit of measure. • Select Measurement System from the Configuration Items window. Configuration Items Displa ...

  • Kodak 5500 - page 11

    2-4 A-61074 April 1997 Date format Date format defines the date display format; both the date format and delimiter. The default format is mmddyy . The default delimiter is a slash ( / ). Refer to Description 1: Date Format Samples for a description of the available options. • Select Date Format from the Configuration Items window. Configuration I ...

  • Kodak 5500 - page 12

    A-61074 April 1997 2-5 Time format Time format defines the time display format. The default is 12 hour with AM/PM . Refer to Description 2: Time Format Samples for a description of the available options. • Select Time Format from the Configuration Items window. Configuration Items Displa y Language Measurement System Date F ormat T ime Format Set ...

  • Kodak 5500 - page 13

    2-6 A-61074 April 1997 Set time and date sets the system clock. The default time is 00:00 ; the default date is 10/10/90 . The options are: — to set each individual time and date field separately. — transfer the internal time and date settings of the computer used during configuration to set the system clock. • Select Set Time and Date from t ...

  • Kodak 5500 - page 14

    A-61074 April 1997 2-7 To set the internal time and date settings: • Select a single field ( month, day, year, hour, or minute ) and press Enter. The sample window assumes that the month field was selected. Configuration Items Displa y Language Measurement System Date F ormat T ime Format Set T ime and Date Confirmation T one V olume Confirmation ...

  • Kodak 5500 - page 15

    2-8 A-61074 April 1997 Confirmation tone volume Repeat this step for each of the time/date fields to be set. NOTE: The time may also be altered using Function Code F21–Set Time; and the date may also be altered using Function Code F22—Set Date. Both the time and the date may be displayed (but not altered) using Function Code F23—View Date and ...

  • Kodak 5500 - page 16

    A-61074 April 1997 2-9 Confirmation tones Confirmation tones enables or disables all confirmation tones (for footswitch, patch reader and bar code reader). The default is Enable . The options are: —Enable— indicates that confirmation tones may be used. — Disable— indicates that confirmation tones may not be used. • Select Confirmation Ton ...

  • Kodak 5500 - page 17

    2-10 A-61074 April 1997 Fixed field delimiter Fixed field delimiter defines the fixed field delimiter used in the image address display. The default is Period (.) . The options are: — Slash (/) — Dash (–) — Period (.) — Space ( ) Refer to Description 3: Fixed Field Delimiter Samples for a description of the available options. • Select F ...

  • Kodak 5500 - page 18

    A-61074 April 1997 2-11 Printer messages Printer messages define the messages which may be printed by the front document printer and/or rear document printer. The messages defined here may be printed by including the desired message number in the document printer print definitions using Mode Configuration items specified in the Front Document Print ...

  • Kodak 5500 - page 19

    2-12 A-61074 April 1997 Version numbers Display the curent scanner firmware versions. • Select Version Numbers from the Configuration Items Window. Setting English Inch 1990/10/10 00:00 Soft Enabled P eriod (.) Configuration Items Displa y Language Measurement System Date F ormat T ime Format Set T ime and Date Confirmation T one V olume Confirma ...

  • Kodak 5500 - page 20

    A-61074 April 1997 2-13 Load scanner from laptop Used to upload a configuration file from diskette to the Scanner 5500/7500. • Select Load Scanner from Laptop from the Configuration Items window. Setting English Inch 1990/10/10 00:00 Soft Enabled P eriod (.) Configuration Items Displa y Language Measurement System Date F ormat T ime Format Set T ...

  • Kodak 5500 - page 21

    2-14 A-61074 April 1997 Load laptop from scanner Used to download a configuration file from the Scanner 5500/7500 onto diskette. This is useful in creating configuration files which may be transported to other Digital Science Scanners. This is also used to create backup files. This option should be performed any time an installation or setup change ...

  • Kodak 5500 - page 22

    A-61074 April 1997 3-1 Accessing the Mode Configuration Menu 3 Mode configuration The following section describes how to access the Mode Configuration menu, how to copy mode definitions from one mode to another, how to select a mode for definition, and how to select each item for definition. Setting English Inch 1990/10/10 00:00 Soft Enabled P erio ...

  • Kodak 5500 - page 23

    3-2 A-61074 April 1997 Mode-to-mode copying A number of modes might have similar definitions. The mode to mode copy feature allows you to fully define one mode and then copy that mode definition to another mode, saving the time and effort required to fully define each mode. Perform the following steps to copy the definitions of one mode to another ...

  • Kodak 5500 - page 24

    A-61074 April 1997 3-3 • Select a mode which contains the definitions you wish to copy to another mode from the Copy From Mode list. Copy From Mode: Define Mode 1 Define Mode 2 Define Mode 3 Define Mode 4 Define Mode 5 Define Mode 6 Define Mode 7 Define Mode 8 Define Mode 9 Define Mode 10 Define Mode 1 1 Define Mode 12 Define Mode 13 Define Mode ...

  • Kodak 5500 - page 25

    3-4 A-61074 April 1997 Selecting a mode for configuration Perform the following steps to select a mode for configuration. NOTE: Not all items available for definition need to be defined. If you wish to allow an item to default or have performed a Mode to Mode copy after fully defining the Copy From Mode, there is no need to define each item. Mode t ...

  • Kodak 5500 - page 26

    A-61074 April 1997 3-5 Index format Index format defines the index format used by the application mode selected. Refer to Description 1: Index Formats for a description of the index formats. The default is mode dependent; the following list provides the defaults for each mode: Mode Index Format Mode 1 Single Level Mode 2 Two Level Offset Mode 3 Two ...

  • Kodak 5500 - page 27

    3-6 A-61074 April 1997 There are five Index Format options available: • Single Level Whenever a document is assigned Level 1, the image address field associated with Level 1 (Field A) is incremented. • Two Level Whenever a document is assigned Level 2, the image address field associated with Level 2 (Field B) is incremented and the field associ ...

  • Kodak 5500 - page 28

    A-61074 April 1997 3-7 • Three Level Whenever a document is assigned Level 3, the image address field associated with Level 3 (Field C) is incremented and the fields associated with Level 2 (Field B) and Level 1 (Field A) are set to zero. Whenever a document is assigned Level 2, the image address field associated with Level 3 (Field C) is unchang ...

  • Kodak 5500 - page 29

    3-8 A-61074 April 1997 IA Field width defines the image address (IA) field widths. Refer to Description 2: Image Address Fields for a description of proper field definitions. • Select IA Field Width from the Mode Configuration window. Single 6006 3 111 Supprs FthenR None Off Off NA NA Index Format IA Field Width Level Rules IA Display Format Adjo ...

  • Kodak 5500 - page 30

    A-61074 April 1997 3-9 Field A (Level 1) Field A represents Level 1. Its value is incremented when a small image mark is placed next to a document and/or a document is assigned Level 1. • Select Field A . Refer to Description 3: Image Address Field Width Defaults for a complete listing of the default values for each mode. Single 6006 3 111 Supprs ...

  • Kodak 5500 - page 31

    3-10 A-61074 April 1997 Field B (Level 2) Field B represents Level 2. Its value is incremented when a medium image mark is placed next to a document and/or a document is assigned Level 2. • Select Field B . Refer to Description 3: Image Address Field Width Defaults for a complete listing of the default values for each mode. Single 6006 3 111 Supp ...

  • Kodak 5500 - page 32

    A-61074 April 1997 3-11 Field C (Level 3) Field C represents Level 3. Its value is incremented when a large image mark is placed next to a document and/or a document is assigned Level 3. • Select Field C . Refer to Description 3: Image Address Field Width Defaults for a complete listing of the default values for each mode. Single 6006 3 111 Suppr ...

  • Kodak 5500 - page 33

    3-12 A-61074 April 1997 Fixed field Fixed field contains fixed information, typically the date. • Select Fixed Field. Refer to Description 3: Image Address Field Width Defaults for a complete listing of the default values for each mode. Single 6006 3 111 Supprs FthenR None Off Off NA NA Index Format IA Field Width Level Rules IA Display Format Ad ...

  • Kodak 5500 - page 34

    A-61074 April 1997 3-13 Description 2: Image Address Fields An image address is a unique identifier assigned to each individual document by the Scanner 5500 or 7500. An image address may contain up to 15 characters; consisting of a maximum of 12 digits and a maximum of 3 delimiters. Four fields must be defined: • Field A represents Level 1. Its v ...

  • Kodak 5500 - page 35

    3-14 A-61074 April 1997 The default field widths for each mode are provided below: Fixed Field C Field B Field A Field Level 3 Level 2 Level 1 Example Mode 1 6 0 0 6 FFFFFF.AAAAAA Mode 2 6 0 6 0 FFFFFF.BBBBBB Mode 3 6 0 3 3 FFFFFF.BBB.AAA Mode 4 6 3 3 0 FFFFFF.CCC.BBB Mode 5 4 2 3 3 FFFF.CC.BBB.AAA Mode 6 6 0 4 2 FFFFFF.BBBB.AA Mode 7 6 0 6 0 FFFFF ...

  • Kodak 5500 - page 36

    A-61074 April 1997 3-15 Level rules define the level of a document based upon the level of the previous document. These definitions are used as defaults when the document level is not determined by another method (i.e., footswitch, level key, etc). • Select Level Rules from the Mode Configuration window. Single 6006 3 111 Supprs FthenR None Off O ...

  • Kodak 5500 - page 37

    3-16 A-61074 April 1997 Level to follow level 0 NOTE: This menu option is a valid selection when using any of the available index formats defined using the Index Format option. • Select Level 0 . Refer to Description 4: Level Rule Options and Defaults for a complete listing of the valid selections and default values for each mode. Single 6006 3 1 ...

  • Kodak 5500 - page 38

    A-61074 April 1997 3-17 Level to follow level 1 NOTE: This menu option is a valid selection when using any of the available index formats defined using the Index Format option. • Select Level 1 . Refer to Description 4: Level Rule Options and Defaults for a complete listing of the valid selections and default values for each mode. Single 6006 3 1 ...

  • Kodak 5500 - page 39

    3-18 A-61074 April 1997 Level to follow level 2 NOTE: This menu option is a valid selection only when using any of the two-level (two level or two level offset) or three-level (three level or three level offset) index formats defined using the Index Format option. • Select Level 2 . Refer to Description 4: Level Rule Options and Defaults for a co ...

  • Kodak 5500 - page 40

    A-61074 April 1997 3-19 Level to follow level 3 NOTE: This menu option is a valid selection only when using any of the three-level (three level or three level offset) index formats defined using the Index Format option. • Select Level 3 . Refer to Description 4: Level Rule Options and Defaults for a complete listing of the valid selections and de ...

  • Kodak 5500 - page 41

    3-20 A-61074 April 1997 Description 4: Level Rule Options and Defaults The default level rules for each mode are provided below: Level 0 Level 1 Level 2 Level 3 is followed by is followed by is followed by is followed by Mode 1 Level 1 Level 1 Level 1 Level 3 Mode 2 Level 2 Level 1 Level 2 Level 3 Mode 3 Level 2 Level 1 Level 2 Level 3 Mode 4 Level ...

  • Kodak 5500 - page 42

    A-61074 April 1997 3-21 Description 4: Level Rule Options and Defaults (continued) The valid level rule options for each index format are provided below: Level 0 may Level 1 may Level 2 may Level 3 may be followed by be followed by be followed by be followed by Single Level Level 0 Level 0 n/a n/a Level 1 Level 1 Two Level Level 0 Level 0 Level 0 n ...

  • Kodak 5500 - page 43

    3-22 A-61074 April 1997 Defines the format of the image address display which appears on the control panel. The default for all modes is Suppress Leading Zeroes . The options are: — Display Leading Zeroes (i.e., 001.002.003.004) — Suppress Leading Zeroes (i.e., 001. 2. 3. 4) • Select IA Display Format from the Mode Configuration window. Singl ...

  • Kodak 5500 - page 44

    A-61074 April 1997 3-23 Defines the image address assigned to the rear side image of a document scanned in duplex mode. The default for all modes is Front then Rear. The options are: — Sequential —indicates that the rear side image of a document scanned in duplex mode will be assigned a unique image address—incremented from the image address ...

  • Kodak 5500 - page 45

    3-24 A-61074 April 1997 Batching defines the number of documents of a specified level to process prior to performing a predefined action. The batching option is not available. • If you select Batching from the Mode Configuration window, the following message will appear: Selection is not available. • Press Enter to close the message. • Make a ...

  • Kodak 5500 - page 46

    A-61074 April 1997 3-25 On/off Enables or disables length monitoring. The default for all modes is Disable . The options are: — Disable —disables all length monitoring. — Enable— enables all length monitoring. NOTE: If Disable is selected, definitions for the remaining document length monitor options will be ignored. • Select On/Off from ...

  • Kodak 5500 - page 47

    3-26 A-61074 April 1997 Defines the minimum document length accepted. The default for all modes is 2.500 inches / 64 mm . The options are: — Within the range of 2.500 inches / 64 mm minimum to 20.000 inches / 508 mm maximum. • Select Minimum Length from the Length Monitor menu. Single 6006 3 111 Supprs FthenR None Off Off NA NA Index Format IA ...

  • Kodak 5500 - page 48

    A-61074 April 1997 3-27 Defines the maximum document length accepted. The default for all modes is 13.000 inches / 330 mm. The options are: — Within the range of 2.500 inches / 64 mm minimum to 20.000 inches / 508 mm maximum. • Select Maximum Length from the Length Monitor menu. Single 6006 3 111 Supprs FthenR None Off Off NA NA Index Format IA ...

  • Kodak 5500 - page 49

    3-28 A-61074 April 1997 Error response defines the action taken when a document shorter than the minimum length or longer than the maximum length is fed into the Scanner 5500/7500. The default for all modes is Display and Beep. The options are: — Display Error Message —results in an error message appearing on the Operator Control Panel (E106– ...

  • Kodak 5500 - page 50

    A-61074 April 1997 3-29 Skew monitor defines the options required to enable/disable the document skew monitor, set the amount of acceptable document skew, and what action is to be taken when document skew is detected. NOTE: In order for the skew monitor to operate correctly, the following conditions must be true: — The amount of skew must be less ...

  • Kodak 5500 - page 51

    3-30 A-61074 April 1997 On/off The on/off enables or disables skew monitoring. The default for all modes is Disable . The options are: — Disable —disables all skew monitoring. — Enable —enables all skew monitoring. NOTE: If Disable is selected, definitions for the remaining document skew monitor options will be ignored. • Select On/Off fr ...

  • Kodak 5500 - page 52

    A-61074 April 1997 3-31 Detection range defines the amount of tolerable skew. The default for all modes is 10–30 degrees. The options are: — 5–30 degrees —results in an error being reported if the amount of document skew is between 5 and 30 degrees. — 10–30 degrees— results in an error being reported if the amount of document skew is ...

  • Kodak 5500 - page 53

    3-32 A-61074 April 1997 Error response defines the action taken when a document skew is detected. The default for all modes is Display and Beep. The options are: — Display Error Message —results in an error message appearing on the Operator Control Panel (E107–Doc Skew Monitor Warning). — Display and Beep— results in an error message appe ...

  • Kodak 5500 - page 54

    A-61074 April 1997 3-33 Footswitch defines the options required when using the footswitch accessory. • Select Footswitch from the Mode Configuration window. Single 6006 3 111 Supprs FthenR None Off Off NA NA Index Format IA Field Width Level Rules IA Display Format Adjoining IA Batching Length Monitor Skew Monitor Footswitch Patch Reader COIN2 Po ...

  • Kodak 5500 - page 55

    3-34 A-61074 April 1997 Press definition Press definition defines the action which is taken when the footswitch is pressed. The default for all modes is No Action . The options are: — Level 0—document Level 0 will be assigned to the next document. — Level 1 —document Level 1 will be assigned to the next document. — Level 2 —document Lev ...

  • Kodak 5500 - page 56

    A-61074 April 1997 3-35 Confirmation tone Confirmation tone enables or disables the Confirmation Tone which sounds when the Footswitch is pressed or released. The default for all modes is Disable. The options are: — Disable— results in no tone sounding when the footswitch is pressed or released. — Enable— results in a tone sounding when the ...

  • Kodak 5500 - page 57

    3-36 A-61074 April 1997 Release definition Release definition defines the action which is taken when the footswitch is released. The default for all modes is No Action . The options are: — Level 0— document Level 0 will be assigned to the next document. — Level 1 —document Level 1 will be assigned to the next document. — Level 2— docume ...

  • Kodak 5500 - page 58

    A-61074 April 1997 3-37 NOTE: The patch reader is an accessory which must be installed and enabled by your Field Engineer. Patch reader defines the options required when using the patch reader accessory. • Select Patch Reader from the Mode Configuration window. Single 6006 3 111 Supprs FthenR None Off Off NA NA Index Format IA Field Width Level R ...

  • Kodak 5500 - page 59

    3-38 A-61074 April 1997 On/off On/off enables or disables patch reading. The default for all modes is Disable . The options are: — Disable —disables all patch reading. — Enable— enables all patch reading. NOTE: If Disable is selected, definitions for the remaining patch reader options will be ignored. • Select On/Off from the Patch Reader ...

  • Kodak 5500 - page 60

    A-61074 April 1997 3-39 Transfer patch definition Transfer patch definition defines the document level assigned to the next document when a transfer patch is used. The default for all modes is Not Used . The options are: — Level 1 —document Level 1 will be assigned to the next document. — Level 2 —document Level 2 will be assigned to the ne ...

  • Kodak 5500 - page 61

    3-40 A-61074 April 1997 Confirmation tone Confirmation tone enables or disables the Confirmation Tone which sounds when a patch document is detected. The default for all modes is Disable. The options are: — Disable— results in no tone sounding when a patch document is detected. — Enable— results in a tone sounding when a patch document is d ...

  • Kodak 5500 - page 62

    A-61074 April 1997 3-41 Level transfer on T-Patch Level transfer on T-Patch defines whether the transfer patch definition is applied to the document containing the transfer patch or the next document fed into the Scanner 5500/7500. The default for all modes is Disabled. The options are: — Disabled— indicates that the next document fed into the ...

  • Kodak 5500 - page 63

    3-42 A-61074 April 1997 The COIN2 Port Select option is not available. • If you select COIN2 Port Select from the Mode Configuration window, the following message will appear: Selection is not available. • Press Enter to clear the message and make another selection from the Mode Configuration window. The OCR option is not available. • If you ...

  • Kodak 5500 - page 64

    A-61074 April 1997 3-43 NOTE: The bar code reader is an accessory which must be installed and enabled by your Field Engineer. Bar code reader defines the options required when using the bar code reader accessory. • Select Bar Code Reader from the Mode Configuration window. Single 6006 3 111 Supprs FthenR None Off Off NA NA Index Format IA Field W ...

  • Kodak 5500 - page 65

    3-44 A-61074 April 1997 On/off On/off enables or disables bar code reading. The default for all modes is Disable . The options are: — Disable —disables all bar code reading. — Enable— enables all bar code reading. NOTE: If Disable is selected, definitions for the remaining bar code reader options will be ignored. • Select On/Off from the ...

  • Kodak 5500 - page 66

    A-61074 April 1997 3-45 Bar code type Bar code type defines the type of bar code which will be used. The default for all modes is Codabar (NW-7) . The options are: — 3 of 9 — Interleaved 2 of 5 — Codabar (NW-7). NOTE: For additional information regarding these bar code types and their characteristics, refer to Bar Code Made Easy (A-61099). ? ...

  • Kodak 5500 - page 67

    3-46 A-61074 April 1997 Codes per document Codes per document defines the number of codes per document to be read/decoded. The default for all modes is One Code Decoded. The options are: — One Code Decoded— results in only the first bar code encountered on a document being read/decoded. — All Codes Decoded— results in all bar codes encounte ...

  • Kodak 5500 - page 68

    A-61074 April 1997 3-47 Minimum code length Minimum code length defines the minimum bar code length allowed, in terms of the number of characters encoded. The default for all modes is 3. The options are: — Within the range of 3 to 40 characters. • Select Minimum Code Length from the Bar Code Reader menu. Single 6006 3 111 Supprs FthenR None Off ...

  • Kodak 5500 - page 69

    3-48 A-61074 April 1997 Maximum code height Maximum code height defines the maximum bar code height allowed. This definition is required only when the Codes Per Document option is defined as All Codes Decoded . The default for all modes is 1 inch / 25.400 mm. The options are: — Within the range of 0.375 inches / 9.525 mm to 3.000 inches / 76.200 ...

  • Kodak 5500 - page 70

    A-61074 April 1997 3-49 Scan direction Scan direction defines whether the bar code is read in one direction; from left to right, or in two directions; from left to right or right to left. NOTE: When bar codes are read in two directions (bidirectional), the time required to read/decode bar codes is extended. The default for all modes is Unidirection ...

  • Kodak 5500 - page 71

    3-50 A-61074 April 1997 Code quality Code quality defines whether image processing is required to enhance the overall quality of the bar codes to ensure the highest possible read rates. Typically, image processing is required only when dot matrix printers are used to generate the bar codes being read/decoded. The default for all modes is Normal Qua ...

  • Kodak 5500 - page 72

    A-61074 April 1997 3-51 Confirmation tone Confirmation tone enables or disables the confirmation tone which sounds when the bar code reader detects a bar code document. The default for all modes is Disable. The options are: — Disable— no tone will sound when a bar code document is detected. — Enable— a tone will sound when a bar code docume ...

  • Kodak 5500 - page 73

    3-52 A-61074 April 1997 Bar code location Bar code location defines whether the bar codes are to be located on the front or rear of the document(s). The default for all modes is Front. The options are: — Front— the bar code reader attempts to detect bar codes on the front side of each document. — Rear— the bar code reader attempts to detect ...

  • Kodak 5500 - page 74

    A-61074 April 1997 3-53 NOTE: The printer controller is an accessory which must be installed and enabled by your Field Engineer. Printer controller defines the options required when using the printer controller accessory with a Front Printer and/or a Rear Printer. • Select Printer Controller from the Mode Configuration window. Single 6006 3 111 S ...

  • Kodak 5500 - page 75

    3-54 A-61074 April 1997 IA Print format IA Print format defines the format of the image address printed by the front printer and/or the rear printer. The default for all modes is Suppress Leading Zeroes . The options are: — Display Leading Zeroes (i.e., 001.002.003.004) — Suppress Leading Zeroes (i.e., 001. 2. 3. 4) — Compress Leading Zeroes ...

  • Kodak 5500 - page 76

    A-61074 April 1997 3-55 Font size Font size defines the size of the characters printed by the front printer and/or the rear printer. The default for all modes is Small (8x9). The options are: — Small (8x9)— results in characters printed using an 8x9 matrix. — Large (12x9)— results in characters printed using a 12x9 matrix. • Select Font S ...

  • Kodak 5500 - page 77

    3-56 A-61074 April 1997 Character orientation Defines the orientation of the characters printed by the front printer and/or the rear printer. The default for all modes is Cine. The options are: • Comic • Comic 180 • Cine • Cine 180 The following illustrate the appearance of each orientation: • Select Character Orientation from the Printer ...

  • Kodak 5500 - page 78

    A-61074 April 1997 3-57 NOTE: The front printer is an accessory which must be installed and enabled by your Field Engineer. Front printer defines the options required when using the front printer accessory. • Select Front Printer from the Mode Configuration window. Single 6006 3 111 Supprs FthenR None Off Off NA NA Index Format IA Field Width Lev ...

  • Kodak 5500 - page 79

    3-58 A-61074 April 1997 On/off On/off enables or disables printing by the front printer. The default for all modes is Disable . The options are: — Disable —disables printing by the front printer. — Enable— enables printing by the front printer. NOTE: If Disable is selected, definitions for the remaining front printer options will be ignored ...

  • Kodak 5500 - page 80

    A-61074 April 1997 3-59 Print definition Print definition defines what information is printed by the front printer. This is dependent upon the document level assigned to the document being printed upon. You may choose one of five options. These options are described below. The procedure for choosing these options is further described on the followi ...

  • Kodak 5500 - page 81

    3-60 A-61074 April 1997 The procedure for defining the previously mentioned options is described below. Defining Level 1 is used as an example. • Select Print Definition from the Front Printer menu. The print definition options are displayed: Single 6006 3 111 Supprs FthenR None Off Off NA NA Index Format IA Field Width Level Rules IA Display For ...

  • Kodak 5500 - page 82

    A-61074 April 1997 3-61 • Select an item from the list of print definition options. • Press Enter. The item selected should appear in the New Print Sequence Display Items box. Repeat this step for each item you wish to include in the print definition for Level 1 document. NOTE: The front printer will print a maximum of 38 characters-per- docume ...

  • Kodak 5500 - page 83

    3-62 A-61074 April 1997 • Use the arrow keys to increase or decrease the current distance: — The left arrow key will decrease the value in 0.125 inch or 1 mm increments. — The right arrow key will increase the value in 0.125 inch or 1 mm increments. — The down arrow key will decrease the value in 1.250 inch or 20 mm increments. — The up a ...

  • Kodak 5500 - page 84

    A-61074 April 1997 3-63 On/off On/off enables or disables printing by the rear printer. The default for all modes is Disable . The options are: — Disable —disables printing by the rear printer. — Enable— enables printing by the rear printer. NOTE: If Disable is selected, definitions for the remaining rear printer options will be ignored. ? ...

  • Kodak 5500 - page 85

    3-64 A-61074 April 1997 Print definition Print definition defines what information is printed by the rear printer on all documents, regardless of the document level assigned to the document. You may choose one of five options. These options are described below. The procedure for choosing these options is further described on the following pages. ? ...

  • Kodak 5500 - page 86

    A-61074 April 1997 3-65 The procedure for defining the previously mentioned options is described below. Defining Level 1 is used as an example. • Select Print Definition from the Rear Printer menu. The print definition options are displayed: Single 6006 3 111 Supprs FthenR None Off Off NA NA Index F ormat IA Field Width Lev el Rules IA Display F ...

  • Kodak 5500 - page 87

    3-66 A-61074 April 1997 The box entitled Current Print Sequence Display Items contains the current print definition for Level 1 documents. The box entitled New Print Sequence Display Items should be blank. • Select an item from the list of print definition options. The item selected should appear in the New Print Sequence Display Items box. Repea ...

  • Kodak 5500 - page 88

    A-61074 April 1997 3-67 • Use the arrow keys to increase or decrease the current distance: — The left arrow key will decrease the value in 0.125 inch or 1 mm increments. — The right arrow key will increase the value in 0.125 inch or 1 mm increments. — The down arrow key will decrease the value in 1.250 inch or 20 mm increments. — The up a ...

  • Kodak 5500 - page 89

    3-68 A-61074 April 1997 Overrides enable or disable mode overrides. The default for all modes is Discard Overrides. The options are: — Discard Overrides— results in the use of function codes to change programming options being temporary—not overriding the definitions made here. — Save Overrides— results in the use of function codes to cha ...

  • Kodak 5500 - page 90

    A-61074 April 1997 3-69 Exiting the mode configuration menu When all of the mode configuration options have been defined for current mode, you will exit the Mode Configuration window. • Select one of the options listed below from the Mode Configuration window: Single 6006 3 111 Supprs FthenR None Off Off NA NA Index Format IA Field Width Level Ru ...

  • Kodak 5500 - page 91

    A-61074 April 1997 A-1 Appendix A Default summaries Machine Configuration Defaults—All Modes Description Default Value Display Language English Measurement System Inch Date Format mmddyy Date Delimiter slash (/) Time Format 12 hour with AM/PM Set Time and Date n/a Confirmation Tone Soft Volume Confirmation Tones Enable Fixed Field Delimiter Perio ...

  • Kodak 5500 - page 92

    A-2 A-61074 April 1997 Mode configuration defaults Default Values Description Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Mode 6 Mode 7 Mode 8 Index Format 1 2Off 2 3Off 3 2 2Off 3 IA Field Widths Fixed 6666 4 66 4 Level 3 (C) 0003 2 00 2 Level 2 (B) 0633 3 46 3 Level 1 (A) 6030 3 20 3 Level Rules Level 0 followed by Level 1 Level 2 Level 2 Level 3 Level 2 ...

  • Kodak 5500 - page 93

    A-61074 April 1997 A-3 Mode configuration defaults Default Values Mode 9 Mode 10 Mode 11 Mode 12 Mode 13 Mode 14 Mode 15 Mode 16 Mode 17 Mode 18 3 3333 33 333 4 4444 44 444 2 2222 22 222 3 3333 33 333 3 3333 33 333 Level 2 Level 2 Level 2 Level 2 Level 2 Level 2 Level 2 Level 2 Level 2 Level 2 Level 1 Level 1 Level 1 Level 1 Level 1 Level 1 Level 1 ...

  • Kodak 5500 - page 94

    A-4 A-61074 April 1997 Mode configuration defaults Default Values Description Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Mode 6 Mode 7 Mode 8 Patch Reader On/Off Disable Disable Disable Disable Disable Disable Disable Disable Transfer Patch Def. None None None None None None None None Confirmation Tone Disable Disable Disable Disable Disable Disable Disabl ...

  • Kodak 5500 - page 95

    A-61074 April 1997 A-5 Mode configuration defaults Default Values Mode 9 Mode 10 Mode 11 Mode 12 Mode 13 Mode 14 Mode 15 Mode 16 Mode 17 Mode 18 Disable Disable Disable Disable Disable Disable Disable Disable Disable Disable None None None None None None None None None None Disable Disable Disable Disable Disable Disable Disable Disable Disable Dis ...

  • Kodak 5500 - page 96

    A-61074 April 1997 B-1 Appendix B Langua g e suppor t When inputting messages which contain non-ASCII standard characters, refer to the following tables to determine the code assigned to the desired character to be input and then follow the procedure outlined below: NOTE: The message input may have up to 38 characters. • Enter any standard ASCII ...

  • Kodak 5500 - page 97

    B-2 A-61074 April 1997 Msg. No . 1 2 3 4 5 6 7 8 9 5 Definition Printer Messages ABC CODE 191 NOTE: In this example, it has been determined that the desired character is a Æ , and the code which corresponds to this character is 191. • Press Enter to input the code and close the Code box. The character will be input to the message. Msg. No . 1 2 ...

  • Kodak 5500 - page 98

    A-61074 April 1997 B-3 • Press Enter to place the message in the message table when all desired message information has been inputted. You will be asked to confirm the replacement of the current contents of the message with the new message input. When the message, Replace Msg? appears: • Select Yes to confirm that the new message input should r ...

  • Kodak 5500 - page 99

    B-4 A-61074 April 1997 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 Code Number European Character blank Katakana Character blank 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 Code Number European Character Katakana Character 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 Code Number European Character Katakana Character ...

  • Kodak 5500 - page 100

    EASTMAN K ODAK COMP ANY Business Imaging Systems Rochester , Ne w Y ork 14650 K od ak, Digital Science and the Digital Science monog r am are trademar ks of Eastman Kodak Compan y . Printed on recycled paper . B USINESS IMA GING SYSTEMS A-61074 4/97 © Eastman Kodak Compan y , 1997 Printed in U .S.A. ...

Manufacturer Kodak Category Water Pump

Documents that we receive from a manufacturer of a Kodak 5500 can be divided into several groups. They are, among others:
- Kodak technical drawings
- 5500 manuals
- Kodak product data sheets
- information booklets
- or energy labels Kodak 5500
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kodak 5500.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kodak 5500, service manual, brief instructions and user manuals Kodak 5500. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kodak 5500.

Similar manuals

A complete manual for the device Kodak 5500, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kodak 5500 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kodak 5500.

A complete Kodak manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kodak 5500 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kodak 5500, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kodak 5500, that we can find in the current document
3. Tips how to use the basic functions of the device Kodak 5500 - which should help us in our first steps of using Kodak 5500
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kodak 5500
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kodak 5500 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kodak 5500?

Use the form below

If you did not solve your problem by using a manual Kodak 5500, ask a question using the form below. If a user had a similar problem with Kodak 5500 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)