-
JVC 0397MKV*UN*SN - page 1
GV-DS1 JLIP VIDEO CAPTURE DOCKING STATION LYT0002-0H6B GV-DS1 COPYRIGHT© 1997 VICTOR COMPANY OF JAPAN, LTD. EG/EG (S) Printed in Japan 0397MKV * UN * SN VICTOR COMP ANY OF JAPAN, LIMITED INSTRUCTIONS ENGLISH EN EN ...
-
JVC 0397MKV*UN*SN - page 2
2 EN Dear Customer , Thank you for purchasing this VIDEO CAPTURE DOCKING ST A TION. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. SAFETY PRECAUTIONS Using This Instruction Manual • All major sections and subsections are listed in the T able Of Contents ( Z pg. 5 ...
-
JVC 0397MKV*UN*SN - page 3
EN 3 CAUTIONS If you notice smoke or a peculiar smell coming from the VIDEO CAPTURE DOCKING STA TION unplug it IMMEDIA TEL Y . Use of the VIDEO CAPTURE DOCKING STA TION under these conditions could lead to fire or electric shock. Contact your JVC dealer . DO NOT attempt to repair the malfunction yourself. DO NOT attempt to insert foreign objects in ...
-
JVC 0397MKV*UN*SN - page 4
4 EN CAUTIONS (cont.) How to handle a CD-ROM ● T ake care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty , gently wipe it with a soft cloth outward from the center hole using a circular motion. ● Do not use conventi ...
-
JVC 0397MKV*UN*SN - page 5
EN 5 CONTENTS MAJOR FEA TURES 8 CONTROLS AND CONNECTORS 10 CONNECTIONS (When Using JLIP V ideo Capture Software) 12 INTRODUCTION 14 INST ALLA TION (JLIP V ideo Capture Software) 15 OPEN & CLOSE (Basic Operation Procedure) 16 Preparation ....................................................................... 16 How to close the program ......... ...
-
JVC 0397MKV*UN*SN - page 6
6 EN CONTENTS (cont.) ADDITIONAL OPERA TIONS 30 Counter value change ............................................................ 30 Counter reset ..................................................................... 30 Delete index image and full image ............................................. 31 Change ID ..................................... ...
-
JVC 0397MKV*UN*SN - page 7
EN 7 VIDEO PRINTER OPERA TION (GV -PT2) 58 Printing ............................................................................ 58 Auto capture ...................................................................... 60 ADV ANCED OPERA TIONS 62 Changing ID number ............................................................. 62 Connecting other devic ...
-
JVC 0397MKV*UN*SN - page 8
8 EN MAJOR FEA TURES Business presentations Images captured from video can be incorpo- rated into business documents to spice up your presentations. Internet homepage Images captured from video can be incorpo- rated in your Internet homepage using image editing software. Advanced Applications Create title indexes for your video collection Title ind ...
-
JVC 0397MKV*UN*SN - page 9
EN 9 T wo software programs are provided with the GV -DS1 JLIP package. JLIP Video Capture Software ( Z pg. 12 – 39) JLIP Video Capture Software This is the software described in this manual. Video Capture Facility Video images from video sour ce units such as camcorders or VCRs can be captured as 768 x 552 still images with 16.77 million colors ...
-
JVC 0397MKV*UN*SN - page 10
10 EN CONTROLS AND CONNECTORS The controls and connectors marked * can be used only when the GR-DVM1 or GR-DVM801 Digital Camcorder is attached. For details of its operation, read the camcorder instruction manual. * RELEASE button * Lock lever * DIGIT AL jack Z p. 13 • Connect to the computer ’ s RS-232C terminal (COM port). * Multi connector ? ...
-
JVC 0397MKV*UN*SN - page 11
EN 11 * S-Video output jack • Outputs S-V ideo signal. (Also compatible with S1 and S2 connectors.) DC input jack Z p. 13 * Remote control sensor • Receives the remote control signals for the attached Camcorder . * EDIT jack * Audio output jack [R] * Video output jack * Audio output jack [L] CAPTURE INPUT (EXT .)/PRINTER connector Z p. 13 • C ...
-
JVC 0397MKV*UN*SN - page 12
12 EN CONNECTIONS (When Using JLIP V ideo Capture Software) n T o assure safety , make sure all units are turned off before making any connections. n The video images will be displayed on the LCD screen of the attached GR-DVM1 or GR- DVM801. Y ou cannot view the images on the computer screen. n When connecting the provided cables, be sure to connec ...
-
JVC 0397MKV*UN*SN - page 13
EN 13 JLIP 3.5 mm diameter 4-pole cables (provided) V ideo Capture Docking Station Digital Camcorder AC Adapter/Charger Core filter T o CAPTURE INPUT (EXT .)/ PRINTER connector Other units with video output jack DC cable (provided) Core filter (red) (white) (yellow) AUDIO/VIDEO cable (provided) Core filter T o JLIP j ...
-
JVC 0397MKV*UN*SN - page 14
14 EN INTRODUCTION What is video capture software ? Video capture software is a type of application program that allows you to capture video images from camcorders and VCRs and store them in personal computers running under the Windows T operating system. These images can be transferred from the video source to the computer via a standard RS-232C c ...
-
JVC 0397MKV*UN*SN - page 15
EN 15 INST ALLA TION (JLIP V ideo Capture Software) WINDOWS T 95 Refer to the Windows T 95 manual or your computer ’ s manual for details on basic Windows T 95 operating procedures. Installation Procedure This software offers you the choise of viewing on-screen messages in English or French. Select the desired language during installa- tion by pe ...
-
JVC 0397MKV*UN*SN - page 16
16 EN OPEN & CLOSE (Basic Operation Procedure) The V ideo Capture software can be started up in the same way as any other program running under Windows. The procedure differs slightly depending on whether you’re using W indows T 3.1 or Windows T 95. Preparation • T urn on your computer . • T urn on the video source units (such as camcorde ...
-
JVC 0397MKV*UN*SN - page 17
EN 17 HOW TO CLOSE THE PROGRAM Double-click the control menu button in Windows T 3.1 or click " Exit " in the " File (F) " menu. In Windows T 95, simply click the Close button. If you try to close the program with no image data saved, the message " The album has not been saved. Save? " appears. Please note that if you ...
-
JVC 0397MKV*UN*SN - page 18
18 EN INITIALIZA TION INITIALIZING JLIP The first time you start the V ideo Capture software, JLIP initialization is required. This sets which of the computer ’ s COM ports (connector into which the RS-232C cable is plugged) is connected to the GV -DS1 JLIP V ideo Capture Docking Station. The initialization window automatically appears the first ...
-
JVC 0397MKV*UN*SN - page 19
EN 19 SELECT UNITS 6 . Call up the " Device Selection " window . 7 . Click the name of the unit required. •The word "VCRCAMERA" appears in the VCR box to indicate the V ideo source unit is now in use. •The word " MODULE " appears in the V ideo Capture box to indicate the V ideo Capture Docking Station is now in use ...
-
JVC 0397MKV*UN*SN - page 20
20 EN HOW THE DESKTOP WORKS 1 Menu bar Displays function menus. See the next page for detailed information. 2 Control buttons • CAPTURE button ( Z page 25) Press to CAPTURE a desired image from an image source. When pressed, an index image appears under this button. • TRANSFER button ( Z pages 27 through 28) The TRANSFER button is used to start ...
-
JVC 0397MKV*UN*SN - page 21
EN 21 3 Image display area Each time you press the Capture button an index image is captured into the image area. Up to 99 images can be captured, with up to five images in one horizontal frame. Index images are provided to allow you to confirm that you have captured the images you want. Index image data: 80 x 60 pixels Full image data: 768 x 552 p ...
-
JVC 0397MKV*UN*SN - page 22
22 EN File New Album Open Album Save Album Open JLIP (jlp) File Save As JLIP (jlp) File Save Image As… Exit Ctrl+S Ctrl+A HOW THE DESKTOP WORKS (cont.) Each pulldown menu is configured as follows Set-up Capture Mode Image Format Device Change Initialize ID Change Counter Reset Edit Transfer the Index Image Transfer ...
-
JVC 0397MKV*UN*SN - page 23
EN 23 Window Arrange Index VCR NOTE : Counter reset If you use a DV -format digital camcorder , counter information is represented by the time code written on the tape. Counter reset is not possible. Deletes space when an index image has been deleted ( Z p. 31). The VCR operation window appears to allow the computer to operate the VCR. [VCR] ope ...
-
JVC 0397MKV*UN*SN - page 24
24 EN VIDEO CAPTURE CAPTURING VIDEO IMAGES There are three capture modes available: Step by Step , Program and Interval. The latter two modes are available only when connected to a JLIP compatible video source unit. Step by Step Capture mode must be used to capture images from a video source unit with no JLIP connector . Image data flow When storin ...
-
JVC 0397MKV*UN*SN - page 25
EN 25 STEP BY STEP CAPTURE Use the Step by Step Capture mode when you want to: • Capture images from a video source unit with no JLIP connector • Capture images from video units with video output connectors • Capture a smaller number of images • Confirm the images being captured. Set-up Capture Mode Image Format Device Change Init ...
-
JVC 0397MKV*UN*SN - page 26
26 EN VIDEO CAPTURE (cont.) AUTOMA TIC CAPTURE Automatic video capture is available only when a JLIP-compatible video source unit is con- nected. There are two types of automatic capture: Program mode and Interval mode. Y ou can save time in either mode because, once the initial settings have been stored or you have decided what pictures to capture ...
-
JVC 0397MKV*UN*SN - page 27
EN 27 4 Click " Window " — " VCR " to call up the VCR Operation window . 5 Operate the video source unit via the VCR Operation window . 6 Click the " Capture " button on the desired video image, and index image data (80 x 60 pixels) is transferred to the computer . •The message " No.1 index image being transfe ...
-
JVC 0397MKV*UN*SN - page 28
28 EN VIDEO CAPTURE (cont.) INTERV AL CAPTURE The Interval Capture mode is best suited for capturing images at set intervals from a video source unit with a JLIP connector . Preparation •Make sure all units are properly connected ( Z p. 12). •Insert a tape into the video sour ce unit. Click " Image Format " in " Set-up " and ...
-
JVC 0397MKV*UN*SN - page 29
EN 29 SELECTING A PICTURE FORMA T Under " Image Format ", you can specify the full image data format and the capture mode. PICTURE FORMA T SETTING 3 Select capture mode. •There are two different settings avail- able: " Frame Picture " and " Field Picture ". Refer to "Capture Mode" below for details. 4 Click ...
-
JVC 0397MKV*UN*SN - page 30
30 EN ADDITIONAL OPERA TIONS COUNTER VALUE CHANGE If you want to replace a captured image with a different one, you can capture the new one by changing the counter value. 1 Open the menu bar and click " Set-up " — " Counter Reset ". •The VCR's counter is reset. •The counters of DV -format digital camcorders cannot be ...
-
JVC 0397MKV*UN*SN - page 31
EN 31 DELETE INDEX IMAGE AND FULL IMAGE Y ou can delete any captured picture. Both index image (80 x 60 pixels) and full image (768 x 552 pixels) are deleted. 1 Click the image display box you want to delete. •The box is bordered in green. 2 Open the menu bar and click " Edit " — " Delete ". •This deletes the selected imag ...
-
JVC 0397MKV*UN*SN - page 32
32 EN SA VE PICTURE CREA TE NEW FOLDER Creating a new folder (directory) is a good idea when capturing an image from another video tape. 1 Open the menu bar and click " File " — " New Album ". •The image display area is refreshed. •If the index image data on screen is not saved, you will be asked whether to save or not. SA ...
-
JVC 0397MKV*UN*SN - page 33
EN 33 OPEN INDEX 1 Open the menu bar and click " File " — " Open Album ". •The " Open Album " window appears. 2 Select the name of the folder (directory). 3 Click " OK ". File Save Image As… Exit Ctrl+S Ctrl+A New Album Open Album Save Album Open JLIP (jlp) File Save As JLIP (jlp) File ? ...
-
JVC 0397MKV*UN*SN - page 34
34 EN JLIP PLA YER SOFTW ARE USING JLIP PLA YER SOFTW ARE DA T A The GV -DS1 V ideo Capture Docking Station can capture JLIP Player software data at an edit-in point corresponding to a preset counter number . Preparation •Make sure all units are properly connected ( Z p. 12). •Insert the tape program edited with the Player Software into the vid ...
-
JVC 0397MKV*UN*SN - page 35
EN 35 HOW TO STORE JLIP PLA YER DA T A Data from this unit can be converted to JLIP Player software files. If index image data is saved as a JLIP Player software file, the file can be printed with the optional GV-PT2 V ideo Printer . Refer to the instruction manual for details. Preparation •Make sure all units are properly connected ( Z p. 12). ? ...
-
JVC 0397MKV*UN*SN - page 36
36 EN TROUBLESHOOTING NOTE : External noise or disturbance may interfere with the microprocessors built into the GV -DS1 JLIP V ideo Capture Docking Station. If this happens, turn the power off and then turn it on again. Problem — — 23 1 1 – 13 19 18 — 23 — — Page No effect when clicking the Input Select/Memory buttons. The video equipm ...
-
JVC 0397MKV*UN*SN - page 37
EN 37 TROUBLESHOOTING (cont.) Problem 25 – 28 30 26 — 18 29 Page Cannot capture video data with the desired counter number . Counter cannot be reset. Program capture suddenly stops. After finishing video capture, the video file remains in the JCPT folder (where the program run file is contained). JLIP initialization not possible. With V ideo ca ...
-
JVC 0397MKV*UN*SN - page 38
38 EN LIST OF ERROR MESSAGES v Appears when: m Action: Message COM port is not available. Connected device not found. Error — T ransfer halted. v Not connected to COM port set by JLIP Initialize. m Check the COM port number and connector and retry JLIP initialization. v Connected devices are not turned on. v Selected COM port is not connected pro ...
-
JVC 0397MKV*UN*SN - page 39
EN 39 v Appears when: m Action: Message Execute after playing back the VCR. Not enough disk space is available. Communication error . Check the capture device. v V ideo unit is not in Play mode during Interval Capture. m Click "OK", set the video unit to Play and click " T ransfer " again. v Remaining disk space is under 1 MB. m ...
-
JVC 0397MKV*UN*SN - page 40
40 EN MEMO ...
-
JVC 0397MKV*UN*SN - page 41
EN 41 JLIP PLA YER SOFTW ARE SECTION q The Readme.TXT file provides additional information for setup and information that is not included in the instruction manual. Please read the file before installing the provided software program. q Y ou can find the latest information (in English) on the provided software program at our www server . <www> ...
-
JVC 0397MKV*UN*SN - page 42
42 EN CONNECTIONS (When Using JLIP Player Software) WHEN CONNECTING TO A VIDEO SOURCE UNIT WITH JLIP CONNECTOR OR TO A VIDEO PRINTER n Be sure to turn off the power of all connected units before making any connections. n When connecting the provided cable, be sure to connect the plug with the Core Filter to the Video Capture Docking Station. RM-V70 ...
-
JVC 0397MKV*UN*SN - page 43
EN 43 JLIP Core Filter Digital camcorder T o JLIP jack AC Power Adapter/Charger DC cord Core Filter JLIP V ideo Capture Docking station T o edit jack To S output jack Core Filter T o video/ audio output jack (yellow) (white) (red) S-V ideo cable (provided) AUDIO/ VIDEO cable (provided) (red) (white) (yellow) To S - VIDEO input jack To AUDIO input j ...
-
JVC 0397MKV*UN*SN - page 44
44 EN GETTING ST ARTED What is JLIP ? JLIP* stands for Joint Level Interface Protocol, a new communication protocol which allows A V units equipped with a JLIP terminal to be controlled by a personal computer . * is a registered trademark of JVC. Operating Environment ● Personal computer with Microsoft T Windows T 3.1 or W indows T 95 ● CPU Int ...
-
JVC 0397MKV*UN*SN - page 45
EN 45 INST ALLING (JLIP Player Software) WINDOWS T 95 Refer to the Windows T 95 manual or your computer ’ s manual for details on basic Windows T 95 operating procedures. Installation Procedure This software offers you the choise of viewing on-screen messages in English or French. Select the desired language during installa- tion by performing th ...
-
JVC 0397MKV*UN*SN - page 46
46 EN ST ARTING JLIP PLA YER SOFTW ARE MOVIE PLAYER Serial Port Selection Select a Serial Port. OK CANCEL COM 1 COM 2 COM 3 COM 4 Initializing JLIP Now checking devices' ID ... ID:10 Starting JLIP Player Software 1 PREP ARE DEVICE(S) T urn the device(s) on and set the camcorder's Power Dial to "PLA Y". 2 ACCESS MOVIE ...
-
JVC 0397MKV*UN*SN - page 47
EN 47 •An error message " No devices detected to connect. Power ON all devices in system. " appears . . . ... when a wrong port number is selected. ... when the connection is wrong. ... when the device's ID number is already in use. ... when the device's power is not turned on. Check the Serial Port selection, too. T o return ...
-
JVC 0397MKV*UN*SN - page 48
48 EN MOVIE PLA YER FILE POWER PROGRAM PLAYBACK COUNTER Non Drop MEMO ID SCENE CUT IN CUT OUT START SCENE ELAPSED TIME 00:00:00:00F IN/OUT OFF ON MODE STILL PLAY SEARCH SLOW FF REW 00:00:00:00F 06 File Video Printer Help Edit MOVIE PLA YER WINDOW BUTTONS AND DISPLA YS 5. POWER button Control-menu box Menu bar 1. COUNTER system 2. ...
-
JVC 0397MKV*UN*SN - page 49
EN 49 1. COUNTER system 2. T ape counter display • Displays actual tape position. ex. 00: 01: 45: 10F (Hours : Minutes : Seconds : Frames) 3. ID number • Displays the selected device's ID number . 4. FILE name • Displays file name after saving the program under a new name. ex. travel 5. POWER button • T urns the device on and off. • ...
-
JVC 0397MKV*UN*SN - page 50
50 EN Setting in/out points 1 PLA YBACK ON TV MONITOR Click © . Playback picture appears on the TV monitor . 2 SET CUT IN/OUT POINTS Select "Set Function" from "Edit" in the Movie Player window and select "Edit T ape". T o set CUT IN/OUT points, click IN/OUT button at the beginning and end of the scene you want to dub ...
-
JVC 0397MKV*UN*SN - page 51
EN 51 Playing back all programmed scenes 1 ST ART PLA YBACK Click "ST AR T". •The camcorder plays back scenes in numerical order and stops immediately after the last scene's CUT OUT point. •Only the camcorder moves. NOTES: ● During playback of programmed scenes, do no operation other than pressing "STOP". If other ope ...
-
JVC 0397MKV*UN*SN - page 52
52 EN BASIC OPERA TIONS (cont.) Dubbing Y ou can record all programmed scenes onto the tape in the recording deck. Dubbing is possible only when the GR- DVM1or GR-DVM801 is connected. (as of March, 1997) 1 PREP ARE NEW T APE Make sure the erase protection tab on the tape is present. Then insert it into the recording deck and set the recording deck ...
-
JVC 0397MKV*UN*SN - page 53
EN 53 Saving the program list on hard disk It is possible to save all programmed scene information as a file in the computer . 1 ST ART SA VING Select " Save As " from "File" on the MOVIE PLA YER window . •The " Save a program list " dialog box appears. 2 ENTER FILE NAME Input a file name (up to 8 characters) in the ...
-
JVC 0397MKV*UN*SN - page 54
54 EN BASIC OPERA TIONS (cont.) Opening a file saved on floppy disk 1 INSERT FLOPPY DISK INTO DRIVE 2 SELECT DRIVE NUMBER Click Ä in "DRIVE". 3 LOOK FOR FILE NAMES Open "tape" in the directry . 4 SELECT FILE NAME Follow steps 2 and 3 in "Opening a saved file" on the left. MOVIE PLA YER FILE POWER PROGRAM PLAYBACK COUN ...
-
JVC 0397MKV*UN*SN - page 55
EN 55 T ransferring the programmed scene to an other position 1 DESIGNA TE SCENE TO BE TRANSFERRED Click on the scene you want to transfer and choose "Cut" from "Edit". •The message " Scene No. will be deleted. " appears. T o cut, click on "OK". 2 DESIGNA TE POSITION Click on the scene number which is above ...
-
JVC 0397MKV*UN*SN - page 56
56 EN VIDEO PRINTER WINDOW BUTTONS AND DISPLA YS Video Printer POWER SELECT PIX STABILIZER OFF ON POSITION ID 20 STORE PRINT SOURCE MEMORY CLOSE STROBE SPEED HIGH LOW 16 4 OFF STROBE SELECTED SAME MULTI-PIX CONTENT Aperture Off ! ! OFF ON Title bar 9. STORE button 10. PRINT button 1 1. SELECT (scene select) button 12. CLOSE button 1. POWER button 2 ...
-
JVC 0397MKV*UN*SN - page 57
EN 57 1. POWER button • T urns the device on and off. 2. POSITION button • Selects the position to store a scene in memory for Multi-Print. 3. ID number • Displays the selected device's ID number . 4. Message display • Displays the operating mode of the selected device. 5. MUL TI-PIX button • Select by clicking ( ¶ / Ä ) button. OF ...
-
JVC 0397MKV*UN*SN - page 58
58 EN VIDEO PRINTER OPERA TION (GV -PT2) Printing Before printing, perform the procedure listed below . ● Connect to image and sound source ( Z pg. 42, 43). ● Set VCR to external input. ● Set TV to VIDEO mode so that images from video printer appear . 1 BRING UP VIDEO PRINTER WINDOW Select "Set-up" from "Video Printer" on ...
-
JVC 0397MKV*UN*SN - page 59
EN 59 Quitting the MOVIE PLA YER window 1 CHOOSE "EXIT" FROM "FILE" •The MOVIE PLA YER window closes. Quitting the "Video Printer" window 1 CLICK "CLOSE" •The "V ideo Printer" window closes. ...
-
JVC 0397MKV*UN*SN - page 60
60 EN VIDEO PRINTER OPERA TION (GV -PT2) (cont.) Preparation • Load the tape into the video unit. • Convert the captured data to JLIP Player software data and store it ( Z p. 35). • Select file name ( Z p. 54). • Prepare for printing (refer to the GV-PT2 instruction manual). • Select desired layout using the remote control unit provided w ...
-
JVC 0397MKV*UN*SN - page 61
EN 61 3 Click T itle in the MOVIE PLA YER window and activate the window . 4 Select " Edit " — " Set Function " — " Auto Capture ". 5 Click " ST ART " •The captured video data set first is sear ched and stored in the video printer . •When the data has been stored, the message " Image has been cap ...
-
JVC 0397MKV*UN*SN - page 62
62 EN ADV ANCED OPERA TIONS Changing ID number The device's ID number is preset at factory as follows: ex. Camcorder: 06 or 07 Video printer: 20 When connecting more than two same type devices, the same ID numbers will exist and a malfunction can occur . T o avoid a malfunction, change the ID numbers. It is recommended to change the ID number ...
-
JVC 0397MKV*UN*SN - page 63
EN 63 When Using the Video Capture Software The JLIP Player Software and JLIP Video Capture Software cannot run simultaneously . When you want to run the JLIP V ideo Capture Software, first select "Close Serial" from "File" on the menu bar . T o resume using the JLIP Player Software, click the "JLIP" button in the JLIP ...
-
JVC 0397MKV*UN*SN - page 64
64 EN ADV ANCED OPERA TIONS (cont.) Adjusting the gap between the stored edit-start point in the computer and the dubbed one in the recording deck During dubbing, the beginning of the scene stored in the computer can be missed or the scene prior to the transition you chose for the edit-start point can be dubbed into the recording deck. When these c ...
-
JVC 0397MKV*UN*SN - page 65
EN 65 TROUBLESHOOTING Error – – This application will close. Check devices – – Confirm that power is ON. No devices detected to connect. Power ON all devices in system. Communication error (&H (number)) Check cable connection. Select the device to control. No video cassette!! Load a video cassette to ID (number). Invalid entry in scene ...
-
JVC 0397MKV*UN*SN - page 66
66 EN MAJOR SPECIFICA TIONS JLIP VIDEO CAPTURE DOCKING ST A TION Connectors S-V ideo : Output Y : 1.0 Vp-p, 75 ohms (S2 output) C : 0.3 Vp-p, 75 ohms V ideo : Input 1.0 Vp-p, 75 ohms (pin jack) (CAPTURE INPUT (EXT .)/PRINTER connector) : Output 1.0 Vp-p, 75 ohms (pin jack) (VIDEO output connector) Audio : Output –8 dB, 1 kiloohm (pin jack) JLIP ( ...
-
JVC 0397MKV*UN*SN - page 67
EN 67 INDEX A Arrange Index ................................. Z pg. 31 Automatic Capture (AUTO) ....... Z pg. 26, 28 B Bitmap ...................................... Z pg. 24, 29 C Capture Mode ................................. Z pg. 29 Change ID ................................ Z pg. 31, 62 COM Port ................................. Z pg. 18, 46 Co ...
-
JVC 0397MKV*UN*SN - page 68
GV-DS1 JLIP VIDEO CAPTURE DOCKING STATION LYT0002-0H6B GV-DS1 COPYRIGHT© 1997 VICTOR COMPANY OF JAPAN, LTD. EG/EG (S) Printed in Japan 0397MKV * UN * SN VICTOR COMP ANY OF JAPAN, LIMITED INSTRUCTIONS ENGLISH EN EN ...
Do you have a question concerning JVC 0397MKV*UN*SN?
Use the form below
If you did not solve your problem by using a manual JVC 0397MKV*UN*SN, ask a question using the form below. If a user had a similar problem with JVC 0397MKV*UN*SN it is likely that he will want to share the way to solve it.