-
Smeg 129316 - page 1
Instructions for Use T umble Dryer ...
-
Smeg 129316 - page 2
129316 Thank you for your trust and for buying our tumble drier . We congratulate you on your wise decision. This appliance is designed for drying clothes for home use only . The dryer enables quick drying of your laundry , leaving it soft and tender without affecting its shape. Our appliances are environmentally friendly: some of the materials are ...
-
Smeg 129316 - page 3
129316 1. Front panel 2. Drying program button 3 Water container 4. Door 5. Condenser 6. Evacuation slots 7. Cooling air slot 8. Legs Dimensions of the appliance (w x d x h): 600 mm x 600 mm x 850 mm Weight (net): evacuation dryer 34 kg, condensation dryer 42 kg Nominal voltage: 230 V , 50 Hz Connecting power: 2900 W Max. load: 6 kg / 7 kg Connecti ...
-
Smeg 129316 - page 4
129316 • Use the dryer to dry only the laundry washed with water . Do not attempt to dry the laundry , washed or cleaned with fl ammable detergents or solutions (gasoline, trichloroethylene etc.), as it may cause explosion. • Do not let the children play with the appliance. Prevent your children or pets to enter the dryer drum. • When discar ...
-
Smeg 129316 - page 5
129316 Before connecting the appliance read these instructions carefully . Repairing the failure arising from inappropriate connections or use of the appliance is not covered by the guarantee. The belt can be replaced by a servising engineer only , who incorporates an original spare part with the marking OPTIBEL T EPH 1906, code 104265, OPTIBEL T 8 ...
-
Smeg 129316 - page 6
129316 • Packaging materials are environmentally friendly: they can either be recycled, safely disposed of or destroyed without any threat to the environment. • T o be able to do this effectively all materials are marked accordingly . Be careful not to damage cabinet of the appliance with a sharp object when removing the packaging. Before conne ...
-
Smeg 129316 - page 7
129316 • Appliance can either stand on its own or can be placed on top of a washing machine of the same dimensions - minimum width 517 mm, depth 476 mm. The surface for placing the dryer must be clean and fl at. Use supplied vacuum feet to prevent sliding of the appliance. W ashing machine hardtop must be wooden or metallic. T o conceal the open ...
-
Smeg 129316 - page 8
129316 1 Lid 2 Evacuation tube A - Evacuation dryer • There are two openings for the evacuation of humid air . One of them should be closed with the supplied lid, while the other should be connected to the evacuation tube. The distance between the dryer and the moist air outlet (ventilation shaft, window) should not exceed 2 meters, otherwise wat ...
-
Smeg 129316 - page 9
129316 • Use the power cord to connect the dryer to the power supply via wall socket. • Rated voltage and other characteristics are indicated on the name plate, located under the door frame of the appliance. The wall socket should always be within reach. It has to be earthed according to the standing regulations. If the supply cable is damaged ...
-
Smeg 129316 - page 10
129316 - Open the dryer door by pushing the left-hand side of the door towards the appliance (make sure the drum is empty). - Sort the laundry according to the type of fabrics. Do the buttons and zippers, tie the strings and pull out the pockets. V ery delicate laundry should be put in a special protective sack. It is suggested to load the drum wit ...
-
Smeg 129316 - page 11
129316 - Insert the laundry into the drum (prior making sure that the drum is empty). - Close the dryer door . - Select drying time • By turning the drying time selector , set the preferred drying period, according to the type and quantity of laundry and washing machine spin rpm (see drying program chart). Selector jog may be turned in both direc ...
-
Smeg 129316 - page 12
129316 • Press the ST ART /P AUSE button (D) - LED E is on, appliance starts to operate (after a 2 second pause). • 10 minutes prior the end of drying program the machine starts the cooling cycle (heater is off), which prevents excessive creasing. • At the end of the cooling program the appliance switches on the anti-crease program, which las ...
-
Smeg 129316 - page 13
129316 • By the user After drying be careful when extracting laundry from the appliance, as it may be hot! Suspending the operation by pressing the ST ART/P AUSE button. In case you press the ST ART/ P AUSE button (D) during the drying procedure, the drying program is suspended, and with the next press of the same button the program is resumed wh ...
-
Smeg 129316 - page 14
129316 • W ater container is full (condenser appliance only) When the container is full, signal lamps (E) and (F) are fl ashing. The drying program is interrupted. When the container is emptied, press the ST ART /P AUSE button (D) to reactivate the drying program. 14 ...
-
Smeg 129316 - page 15
129316 • Drying is economically most effective if you dry the recommended quantity of laundry per one charge (see Program Chart). • Do not dry the laundry made of especially sensitive fi bers (wool, silk), which may shrink or lose shape. • It is not necessary to use a fabric conditioner when washing the laundry , since drying makes it soft a ...
-
Smeg 129316 - page 16
129316 • After every drying clean the fi lter , located in the inner part of the door . • Lift the fi lter lid (Fig.). • Pull your fi ngers over the fi lter to remove fi bers and threads lining. Replace the fi lter cover . • If necessary , also clean the fi lter housing and door sealing. Cleaning of the fi lter on the lower side of ...
-
Smeg 129316 - page 17
129316 Strictly switch the appliance off prior cleaning (unplug the power cord from the wall socket, or turn the selector jog to the position “0”). • Clean the casing and drum interior with soft cloth and mild detergent. • Periodically clean (vacuum) the interior of air evacuation opening and evacuation tube. W ater condensation device shou ...
-
Smeg 129316 - page 18
129316 After fi ve drying cycles you need to do the following (condenser appliances only): • remove, clean/wash and re fi t the fi lters on the interior side of the door and the bottom side of door opening; • remove, clean/wash and re fi t water condenser; • wipe the inside of the water condenser compartment with a damp cloth; • wipe th ...
-
Smeg 129316 - page 19
129316 Interferences from the ambient (for example electrical wiring) could induce signalization of different faults. In such cases: - switch the appliance off, and wait for a few seconds; - plug in the appliance and repeat the drying program. If the fault repeats, call authorized service shop. W arranty shall not apply in case of failures due to i ...
-
Smeg 129316 - page 20
129316 20 Unevenly dried laundry: • If the amount of laundry to be dried is not too big. • If there are only large pieces of laundry (large and small pieces should be dried together). • If dif ferent fabrics are dried together (group the laundry according to the type of fabrics). The machine signals errors or failures in operation by fl ashi ...
-
Smeg 129316 - page 21
129316 Note: Indicated drying time corresponds to the laundry spun at indicated spin rpm. In case of higher or lower spin rpm the times are accordingly shorter or longer . Drying time is also prolonged in case of excessively large pieces of laundry . 21 T ype of laundry Max. load in kg Level of dryness Extra functions Revolutions per minute Lower t ...
-
Smeg 129316 - page 22
129316 Measured values may differ from the actual ones due to fl uctuations in the type or quantity of laundry , spinning, power oscillation as well as ambience temperature and humidity . For illustration the chart gives values for 6/7 kg of testing laundry (measured by the EN61 121 standard) on different RPM of fi nal spin in washing machine (pr ...
-
Smeg 129316 - page 23
SP PG1 OEM 129316/en (07-07) ...
Do you have a question concerning Smeg 129316?
Use the form below
If you did not solve your problem by using a manual Smeg 129316, ask a question using the form below. If a user had a similar problem with Smeg 129316 it is likely that he will want to share the way to solve it.