Manual Furuno 1823C

100 pages 4.95 mb
Download

Go to site of 100

Summary
  • Furuno 1823C - page 1

    PRINTED IN JAP AN MARINE RAD AR MODEL1823C MARINE RAD AR MODEL1833C MARINE RAD AR MODEL1933C MARINE RAD AR MODEL1943C MARINE RAD AR MODEL1953C COLOR VIDEO PLO TTER GD-1900C Back ...

  • Furuno 1823C - page 2

    The paper used in this manual is elemental chlorine free. Your Local Agent/Dealer Your Local Agent/Dealer 9-52 A shihar a-cho, 9-52 A shihar a-cho, Nishinom i y a 662-8580, JAPAN Nishinom i y a 662-8580, JAPAN Tele p hone : Tele p hone : 0798-65-2111 0798-65-2111 Fax Fax 0798-65-4200 0798-65-4200 : : FIRST E DITION : FIRST E DITION : APR. APR. 2001 ...

  • Furuno 1823C - page 3

    i WARNING Radio Frequency Radiation Hazard The radar antenna emits electromagnetic radio frequency (RF) energy which can be harmful, particularly to your eyes. Never look directly into the antenna aperture from a close distance while the radar is in operation or expose yourself to the trans- mitting antenna at a close distance. Distances at which R ...

  • Furuno 1823C - page 4

    ii T A BL E OF CO NT E NTS SA FETY I NST RUCTIONS ........................................................................................ i EQUIPME NT LIS TS ................................................................................................. iii SYST EM CONFIG URA T IONS ............................................................... ...

  • Furuno 1823C - page 5

    iii EQUIPMENT LI STS S t anda rd supp ly Name T ype Cod e No. Qty Remarks RDP-138* - Norm al bright LCD, 300 Cd Displ ay unit RDP-139 - 1 High br i ght LCD, 700 Cd RSB- 0094-0075 - MO DEL 1823C RSB- 0071-057 - MO DEL 1833C XN10A-RSB- 0070-064 - MODE L1933C, 24 rpm, for RDP-138/ 139 XN10A-RSB- 0073-064 - MODE L1933C, 48 rpm, for RDP-138 XN12A-RSB- 0 ...

  • Furuno 1823C - page 6

    i v Op ti on al su pp l y Nam e T ype C od e No . Qty Rem ar ks 000- 013- 484 For G D-1900 C, 100 V A C 000- 013- 485 For G D-1900 C, 1 10 V AC 000- 013- 486 For G D-1900 C, 220 V A C PR-62 000- 013- 487 1 For GD-1900C, 230 V AC Re c tifie r RU-3 423 000- 030- 443 1 For M ODEL series Ext er nal buzz er OP03- 13 6 000- 086- 443 1 M J - A 6S P F 0014 ...

  • Furuno 1823C - page 7

    v SYSTEM CONFIGU R A TIONS Al l Nav Net pro duct s incorpor at e a “ netw ork ci rcuit board” t o i nt egrate eac h Na vNet pr od uct on board t hrou gh a n opti onal LAN cabl e (Et her n et 10BASE-T ). Each NavNet prod uct i s assi gned a n I P addr es s t o enabl e transfer of i mages b etw een other Na vNet product s. For exampl e, vi de o p ...

  • Furuno 1823C - page 8

    vi Network Sounder ETR-6/10N ETR-30N GPS receiver GP-310B/320B 12 - 24 VDC Other NavNet Unit (Model 1833C, etc.) Display unit RDP-138/139 Ship's mains 100/110/115/220/230 VAC 1 φ , 50/60 Hz : Standard : Option Remote Controller RMC-100 External buzzer PC Echo sounder Echosounder Navigator Rectifier PR-62 VGA monitor Remote display Video equip ...

  • Furuno 1823C - page 9

    vii Figure 2 (a) NavNet system, t hree-unit connect ion HUB Network Sounder ETR-6/10N ETR-30N (option) Radar Antenna Unit OR GPS Receiv er GP-310B/320B Radar Antenna Unit OR GPS Receiv er GP-310B/320B RAD AR or PLO TTER RAD AR or PLO TTER Sounder data Radar data Plotter data Note: The picture disappears 10 seconds after the NavNet cable is disconne ...

  • Furuno 1823C - page 10

    viii This page is intentionall y left blank. ...

  • Furuno 1823C - page 11

    1-1 1. MOUNTING 1.1 Installation of Displa y Unit The display unit can be installed on a tablet op, on the overhead or f lush m ounted in a console or panel. T abletop, overhead mounting method W hen selecting a m ounting location f or the display unit keep t he f ollowing in mind: • Keep the display unit out of direct sunlight. • The t em pera ...

  • Furuno 1823C - page 12

    1-2 1.1.1 Mounti ng pr ocedure T ab letop, ov erhea d mounting Follow the procedure below to m ount the display unit on a t abletop or the overhead. 1. Fix the hanger by f our t apping screw (5x 20). 2. Screw knob bolts in display unit, set it t o hanger , and tighten knob bolt s. 3. Attach hard cover to protect LCD. T apping scre ws (4 pcs.) Knob ...

  • Furuno 1823C - page 13

    1-3 Flush mounting Note: Use supplied six pan head screws w hen the thickness of t he bulkhead is fr om 1 1 to 14 m m . For bulkhead which exceeds 14 mm in thickness the lengt h of the pan head screws should be bulkhead thickness (A) plus 7.8± 2 mm . Also t he lengt h of B should be m ax. 8 m m . A B A: thickness of b ulkhead Fixing screw , side v ...

  • Furuno 1823C - page 14

    1-4 1.2 Mounting of Antenna Unit f o r MODEL1833C 1.2.1 Mounti ng considerations W hen selecting a m ounting location f or the ant enna unit keep in m ind the f ollowing points. • Inst all the antenna unit on t he hardtop, radar arch or on a m ast on an appropriat e platf orm . (For sailboats, a m ount ing bracket is optionally available.) It sho ...

  • Furuno 1823C - page 15

    1-5 1.2.2 Mounti ng antenna unit of MODEL 1833C 1. Open the antenna unit packing box carefully . 2. Unbolt the four bolts at the base of the radom e to rem ove the radom e cover . Radome cover Antenna unit The m ounting surf ace m ust be parallel with the waterline and provided w it h five holes (f our fixing holes and one cable entry) whose dimens ...

  • Furuno 1823C - page 16

    1-6 Flat washer Spring washer Platform Antenna base plate M10 x 25 Hex bolt Radome 5 - 10 mm Apply silicone sealant. Effective thread length 25 mm Gasket How to fasten t he radome base to t he mounting platform Wiring and final pr epara tion 4. Drill a hole of at least 20 m illim eters diam et er t hrough the deck or bulkhead to run the signal cabl ...

  • Furuno 1823C - page 17

    1-7 9. Attach three connectors of t he signal cable t o respective ports as shown below . to one of the screws of the cable clamping plate 9-pin connector : to J801 on MD-9208 4-pin connector : to J802 on MD-9208 13-pin connector : to J611 on IF-9214 Signal cable, antenna unit side J802 J801 J611 MD-9208 IF-9214 PTU-9335 Cable entr y RF unit ...

  • Furuno 1823C - page 18

    1-8 10. Att ach t he EMI cores supplied as shown below . J806 J805 J803 J804 J802 J801 Motor J613 J611 J1 EMI core E04SS251512 (Abov e cable clamping plate) Cable entrance IF9214 IF9214A PTU-9335 MD-9208 Cable clamping plate How to a ttach EM I core 1 1. Fix the shield cover . Do not pinch t he cable. 12. Att ach the radom e cover , aligning t rian ...

  • Furuno 1823C - page 19

    1-9 1.2.3 Mounti ng the optional mounti ng bracket A m ount ing bracket f or fast ening t he antenna unit f or MODEL1833C to a m ast on a sailboat is optionally available. Mounting brac ket 1 T ype: OP03-92 Code No.: 008-445-070 T able 1-1 Mounting bracket contents Ty pe Code No. Qty Hex. bolt M4X12 000-804-725 4 Hex. bolt M8X20 000-805-707 8 Mount ...

  • Furuno 1823C - page 20

    1-10 Mounting plate Suppor t plate (1) Suppor t plate (2) Brac ket (1) Brac ket (2) Fixing plate M8 x 20 M8 x 20 M4 x 12 M10 x 25 (supplied with antenna unit) M8 x 20 (A) Assembling the mounting brac ket (B) Fastening antenna to mounting bracket How to assemble and mount the optional mount ing bracket ...

  • Furuno 1823C - page 21

    1-11 1.3 Mounting of Antenna Unit f o r MODEL1933C/1943C/1953C 1.3.1 Mounti ng considerations • The ant enna unit is generally installed either on t op of the wheelhouse or on the radar m ast on a suitable platf orm . Locat e t he antenna unit where there is a good all-round view . Any obstruction will cause shadow and blind sectors. A m ast for ...

  • Furuno 1823C - page 22

    1-12 1.3.2 Mounti ng antenna unit of MODEL 1933C/1943C/ 1953C Referring t o t he outline drawing at the back of t his m anual, drill five holes in the m ount ing platf orm : f our holes of 15 m m diam eter f or fixing the ant enna unit and one hole of 25-30 m m diam et er for t he signal cable. Fastening the Rad i ato r to the Rad i ato r Bracket F ...

  • Furuno 1823C - page 23

    1-13 Mounting of antenna unit The antenna unit can be m ount ed using the f ixing holes on the outside (200 x 200 m m ) or inside (140 x 150 mm ) t he antenna unit. Outsid e fi xing h oles Use the hex head bolt (supplied) to m ount t he antenna unit as below . 1. Lay the corrosion-proof rubber m at (supplied) on t he m ounting platf orm . Ground te ...

  • Furuno 1823C - page 24

    1-14 He x bolt Seal washer Flat washer Spring washer Nut Fixing the antenna unit chassis 4. Pass f lat washers (M12, supplied), spring w ashers (M12, supplied) and nuts (M12, supplied) onto hex bolts. F ast en by tightening nuts. Do not fast en by tightening the hex bolts; seal washers may be dam aged. Antenna unit Mounting platform Silicone sealan ...

  • Furuno 1823C - page 25

    1-15 Ground wire Hex bolt Flat washer Spring washer Flat washer Hex nut Silicone sealant Hex nut Weld here. Silicone sealant Ground wire antenna unit OR Flat washer Spring washer Ground wire GROUND TERMINAL GROUND POINT He x nut How to coat ground point and ground t erminal with silicone sealant ...

  • Furuno 1823C - page 26

    1-16 Fixing holes ins ide antenna unit This m ethod requires rem oval of t he RF unit in the ant enna unit to access inside f ixing holes. Use hex head bolts, f lat washers, spring w ashers and nuts (local supply) to m ount the antenna unit, confirm ing length of bolt s. 1. Loose f our scanner bolts t o open the antenna unit . Refer to figure in be ...

  • Furuno 1823C - page 27

    1-17 Connect ing the Signal Ca ble Only the signal cable runs f r om t he display unit (1953C: power supply unit) to the antenna unit. In order t o m inim ize the chance of picking up electrical int erference, avoid w here possible routing the signal cable near other onboard elect rical equipm ent. Also, avoid running the cable in parallel with pow ...

  • Furuno 1823C - page 28

    1-18 Sheath CABLE GLAND Plate Gasket Flat washer Bolt Within 4 cm T ubing Shield How to fix signal cable in cable gland 6. Unf asten f our screws show n in the figure below . Antenna unit chassis, cover opened 7. Pass t he signal cable through the cable protect or . Antenna unit chassis, cover opened 8. Connect the signal cable to the RTB Board (03 ...

  • Furuno 1823C - page 29

    1-19 Antenna unit chassis, cover opened 10. Fix the signal cable with the cable clam p. 1 1. Release the stay and close the cover . Loosely f ast en t he cover fixing screws; you w ill have to m ake som e adj ustm ents inside af ter com pletion of wiring. Note: W hen closing the cover , set t he gaskets to grooves in the bott om chassis, then tight ...

  • Furuno 1823C - page 30

    1-20 1.4 Mounting of P ower Suppl y Unit f or MODEL 1953C MODEL 1953C has its own pow er supply because of high power consumption. The power supply unit can be installed almost anywhere provided the location is dry , well-v entilated, suff icient m aint enance space is provided (w ithin 5 m f rom the display unit). Note: Do not install t he power s ...

  • Furuno 1823C - page 31

    1-21 1.5 Mounting of Antenna Unit for MODEL 1823C 1.5.1 Mounting consi deration See the m ount ing consideration f or MODEL1833C on page 1-4. The compass safe distance of 1.25 meters (standard compass) and 0.85 met ers (steering compass) should be observed to prevent deviat ion of t he m agnet ic compass. 1.5.2 Mounting antenna uni t of MODEL 1823C ...

  • Furuno 1823C - page 32

    1-22 Flat washer Antenna base assy. Spring washer Platform Hex bolt Apply silicone sealant. (M10 x 25 or M10 x 20) Transceiver module 5 mm or under : M10x20 5-10mm: M10x25 over 10 mm: local supplied bolts Efeective thread length: 12 mm How to fasten t he base t o plat form Remov e and discard the pac king mater ial. Snap holder Antenna unit, inside ...

  • Furuno 1823C - page 33

    1-23 5. Unf asten t he rotation detect or cable from t he cable clam ps. 6. Unf asten 16 screws ( ! 1 , ! 2 and ! 3 in the following figure) to dism ount the shield plat e, core case assy and core case cover . GND IF +V OP GND -V OP Vt GND Pan head screws M3x10 2 pcs. 2 Shield plate Pan head screws M4x8 9 pcs. Pan head screws M4x10 5 pcs. Core case ...

  • Furuno 1823C - page 34

    1-24 7. Pass t he antenna cable with connector t hrough the cable gla nd, gasket and cabl e entrance of t he antenna unit, and then tight en cable gl and. Note 1: Be sure the shrink t ube on the antenna cable does not contact to the gasket. Note 2: Close the gask et t ightly to insert int o t he cable entranc e. Confirm that there is no space betwe ...

  • Furuno 1823C - page 35

    1-2 5 9. Att ach connectors of t he ante nn a cabl e as ap pr opri at e, and t hen fas t e n a pan head screw M 4x 10 t o fix shi eld cabl e and c or e c ase ( r emoved at st ep 6. ) Antenn a unit, c onnec t or loc ation and f i x ing the shield c ab le w /cor e c as e 10.Put EMI core on antenna c able int o the c or e cas e at t ached at step 9. A ...

  • Furuno 1823C - page 36

    1-26 12. Pass the cable from the rotat ion det ector through t wo cable clam ps. Rotate detector Cable clamps Cable tie (Another should be inside.) Antenna unit, cla mping t he rotation detect or cable 13. Follow the instructions on t he label i nside the m ounting base to secure t he snap assy . 14. Conf irm that the rubber gasket is properl y pos ...

  • Furuno 1823C - page 37

    2-1 2. WIRING 2.1 S t andard W iring Al l wi ri ng are t er m i nat ed at the r ear of the di spl ay uni t. NavNet equipment, CU-200 (6P) CAUTION The display unit is shipped with 15 A fuse. Replace fuse with 7A when using the equipment in the following condition; MODEL1823C/1833C/1933C/ 1943C: ship's battery is 24 VDC MODEL1953C/GD-1900C: ship ...

  • Furuno 1823C - page 38

    2-2 12-24 VDC Connect t he pow er cable t o the P OW ER connector at the bac k of t he di spl ay uni t. DJ-1 For M ODEL1823C/1833C/ 1933C/1943C/ 1953C, r emove the w aterproofi ng cap f rom DJ -1 port and di sc ard i t. M ODEL1823C/ 1833C: Connect t he M J-B 24LPF0002 cabl e from the antenna uni t t o thi s port . M ODEL1933C/ 1943C/1953C: Connect ...

  • Furuno 1823C - page 39

    2-3 Con n ecti n g G P-310B/ 320B t o DA T A 2 port W hen an equipm ent i s c onnec t ed t o DA T A 1 port, G PS r ec ei ver GP- 310B / 320B can be connect ed t o DA T A 2 port as show n below . Y ou need a junct i on box and opt i onal cabl e M J-A 6S P F 0003- 050 or M J-A6SPF 0009-100. 1 2 3 4 5 6 7 JUNCTION BO X 1 2 3 4 5 6 TD-A TD-B RD-A RD-B ...

  • Furuno 1823C - page 40

    2-4 2.2 External Buzzer (OP03-136, option) Connection The optional external buzzer provides a louder alert w hen the alarm is viorated. External buzz er T ype: OP03-136 Code no.: 000-086-443 Further , you need the optional cable assy MJ-A7SPF0007-050 (w /7P connector , 5 m, code no. 000-144-418). 1. Attach the MJ-A7SPF0007-050 cable assy (option) t ...

  • Furuno 1823C - page 41

    2-5 2.3 Ho w to Connect with PC W hen connecting with the personal comput er , prepare t he optional cable assy MJ-A7SPF0007-050 and D-sub 9 pins plug (local supply), and connect them as f ollows. SHIELD BLUE D-SUB 9PIN MJ-A7SPF0007-050 1 5 6 9 WHITE BLUE CD RD TD DTR GND DSR RT S CTS RI 1 2 3 4 5 6 7 8 9 TD_DT RD_DT RD3_A RD3_B +12V EXT BUZZ GND 1 ...

  • Furuno 1823C - page 42

    2-6 2.4 Wiring of Power Supply Unit (MODEL1953C only) 1. Loosen t hree M4 screws to remove the cable clam p. 2. Loosen si x M4 screws to remove the unit cover . 3. A t tach t he VL connec t o r of p o w e r su p p l y cable VL3P-VV-S2X2C-AA050 (suppli e d as installation m aterial) to J1 on the POW ER Board. 4. At tach the VH and NH connectors of M ...

  • Furuno 1823C - page 43

    2-7 Note: The power for the power supply unit and display unit m ust be drawn from t he same power switch on the power term inal board. Other Equipment (ex. GPS, E/S etc.) Power terminal board Display unit Power supply unit Other Equipment (ex. GPS, E/S etc.) Other Equipment (ex. GPS, E/S etc.) Other Equipment (ex. GPS, E/S etc.) Other Equipment (e ...

  • Furuno 1823C - page 44

    2-8 2.5 Connection of CU-20 0 (opti on) 1) C onne ction be tw een one displa y un it and on e m e mory c ar d IF unit Connec t as s how n i n the f ig ur e b el o w . Display unit Memory card IF unit CU-200 NETWORK 12 VDC NETWORK MJ-A15A3F0003-030 (3 m, supplied) MJ-A6SPF/TM11AP8-C050 (5 m,supplied) two mini-cards 12 VDC 2) Con nect i on between o ...

  • Furuno 1823C - page 45

    3-1 3. A DJ USTM ENT 3.1 Ho w to Access to Inst all ation Men u Y ou should do t he s et up for t he equi pm e nt t hrough the i nstal l ation menu w hen ins t allat i on has be en f i ni shed. T o acces s t o the i nst all at i on menu, fol lo w the step s i n bel ow . 1. W ith th e disp lay powere d o ff, ho ld d o wn the [M EN U] ke y. T hen, mo ...

  • Furuno 1823C - page 46

    3-2 3.2 NETWORK SETUP Menu T o communi cat e w ith ot her Na vNet equi pme nt, this s et ti ng shoul d be done. 1. Open the I NS T ALL SET UP menu. 2. Press the NET W ORK SET UP sof t key . EDIT RETURN IP ADDRESS 172.031.003.003 HOST NAME RADAR________ RADAR SOURCE RADAR________ CHART SOURCE* ______________ ______________ ______________ SOUNDER SOU ...

  • Furuno 1823C - page 47

    3-3 Conte nt s of Netw ork s et up m enu Item Descri pt io n Def aul t Sett in g IP ADD RESS This ad dres s i s ass ig ned at t he f act ory . Ch ang e th e addres s ( l ast thr ee di g its; 001 t o 2 54) w hen l i ke m odel s ar e connec ted di rec tl y or thr oug h th e hub . D o this chang e b ef or e connec ti ng t h e equi pm ent to th e other ...

  • Furuno 1823C - page 48

    3-4 3.3 RAD AR SETUP Menu Aft er t he network setup, do the following in order to adjust t he radar . Open the INST ALL SETUP m enu, and t hen press the RADAR SETUP sof t key to display the RADAR SETUP m enu. W hen the m essage of “RADAR DOES NO T TRANSMIT . TRANSMIT RADAR?” appears, press the [ E NT ER] knob to transm it or [ CLEAR] key to can ...

  • Furuno 1823C - page 49

    3-5 3.3.1 A NTENN A TYPE Select the antenna t y pe connecting with your display unit. Def ault set t ing is “F”. Select the antenna t ype ref erring t o the table shown belo w . After selection, press the [ENT ER] knob or ENTER soft key . Y our unit Setting MODEL1 823C A MODEL1 833C B MODEL1 933C F MODEL1 943C G MODE L1953C H 3.3.2 TUNING MODEL ...

  • Furuno 1823C - page 50

    3-6 Antenna tuning Initialize the tuning as f ollows. 1. T ransm it the radar . 2. O pen the RADAR SETUP m enu, and t hen select TUNING by the trackball or [ENT ER] knob. 3. Press t he EDIT sof t key or [ENTER] knob to show the setting window . TUNING ON OFF T uning setup menu 4. Sele ct ON. 5. Press t he [ENTER] knob or ENT ER sof t key to st art ...

  • Furuno 1823C - page 51

    3-7 ON OFF TIMING ADJUST Timing adjust setting menu 5. Select ON and press the [E NT ER] knob or ENTER sof t key to show the radar display . PUSH ENTER KNOB AFTER ADJUSTING SWEEP TIMING. RETURN Timing adjustment setting display 6. Rot ate the [E NT ER] knob to straight en the target select ed at step 2, and t hen press the RETURN sof t key to f ini ...

  • Furuno 1823C - page 52

    3-8 3.3.5 HEADI NG ADJUST Y ou have mounted the ant enna unit f acing straight ahead in the direct ion of t he bow . Theref ore, a sm all but conspicuous target dead ahead visually should appear on the heading line (zero degrees). In practice, you will probably observ e som e sm all error on t he display because of the difficult y in achieving accu ...

  • Furuno 1823C - page 53

    3-9 3.3.6 M. B. (Main Bang) SUPPRESSION Main bang (black hole), w hich appears at the display center on short ranges, can suppressed as follows. 1. O pen the RADAR SETUP m enu and select M.B. SUPPRESSI ON by trackball or [ENTER] knob. 2. Press t he EDIT sof t key or [ENTER] knob to show the setting window . 3. Sele ct ON. 4. Press t he [ENTER] knob ...

  • Furuno 1823C - page 54

    3-10 3.3.8 STC CUR VE The def ault ST C curve can be maint ained in m ost cases. If necessary the ST C curve can be changed as follows: 1. O pen the RADAR SETUP m enu and select ST C CURVE. 2. Press t he EDIT sof t key or [ENTER] knob to show the setting window . RETURN NARRO W NORMAL WIDE STC CUR VE STC curve setting window 3. Select STC curv e; N ...

  • Furuno 1823C - page 55

    3-1 1 3.4 C hecking Magnetr on H eater V olt age Note : T his confi r m at i on/ adjus t ment s houl d onl y be perfor m ed by a qual i f ied s er vi c e techni ci an. M agnet ron he ater volt age is f or m ed on t he PT U (1833C)/ M D (1823C/1 93 3C/ 19 43 C/195 3C) Board of t he ante nn a uni t , and prea djusted at the f act ory . Theref ore no ...

  • Furuno 1823C - page 56

    3-12 2. Select POSITI ON SOURCE and press the [ E DI T ] key or [ENTER] knob t o show the position source window . POSITION SOURCE ▲ ▼ FUR UNO BB GPS GP LC ALL 3. Select FURUNO BB GPS, GP , LC or ALL as appropriate and press t he [ ENTER] knob or ENTER soft key . FURUNO BB GPS: GPS Receiv er GP-310B/320B GP: GPS navigator (via NETW ORK or DA T ...

  • Furuno 1823C - page 57

    3-13 GPS SETUP LOCAL TIME OFFSET +00:00 GEODETIC DATUM WGS-84 POSITION SMOOTHING 000 second(s) SPD/CSE SMOOTHING 005 second(s) GPS SPEED AVERAGE 060 second(s) LATITUDE OFFSET 0.000’N LONGITUDE OFFSET 0.000’E DISABLE SATELLITE - - - - - - LATITUDE 45 35.000’ N LONGITUDE 125 00.000’ W ANTENNA HEIGHT 005 m GPS FIX MODE 2D/3D COLD START NO EDIT ...

  • Furuno 1823C - page 58

    3-14 Contents of G PS sensor set tings menu Item Description Settings Default Setting Local T ime Of fset All ows the user to use l ocal time (ins tead of UTC time). Enter time dif ference between local ti me and UTC time. Use the + < - - > - soft key to switch from plus to minus and vi ce versa. -13:30 to +13:30 hr 0 hr (no offset) Geodetic ...

  • Furuno 1823C - page 59

    3-15 Contents of G PS sensor set tings menu (con’ t.) Item Description Settings Default Setting Longitude Of fset As above but for longi tude. Use the W < - - > E soft key to sw itch coordinat e. 9.999’E – 9.999’W 0.0’ (no offset) Disable Sat ellite Every GPS satellite is broadcasting abnormal satellite number (s) in its Almanac, wh ...

  • Furuno 1823C - page 60

    3-16 3.6 Setting up Dat a Port s Setup t he dat a port s accor di ng t o the equi pm ent connecte d t o them as f ol l ow s . 1. Press t he [M ENU] key t o open t he men u. 2. Press t he SY ST EM CO NFI GURA TI O N, SY STEM SET UP and PO RT SETUP s of t keys . 3. Press the GPS/N MEA POR T for DA T A 1 po rt, N MEA PORT fo r D A T A 2 po rt, PC /N M ...

  • Furuno 1823C - page 61

    3-17 NMEA  Version  2.0 Range  and  bearing  mode:  Rhumb  line  NMEA  Version  1.5  Range  and  bearing  mode:  Great  circle SELECT SNTNC RETURN ON/OFF AAM APB BOD BWR DPT GGA GLL GTD MTW RMA RMB RMC VHW VTG WPL XTE ZDA HDT HDG MWV TTM -- ON -- -- -- -- ON -- -- -- ON ON -- ON -- -- ON -- -- -- - ...

  • Furuno 1823C - page 62

    3-18 Conte nt s of DA T A 4 PO RT m enu Item Description Settings Default Setting NMEA Output Format S elects NMEA output forma t. NMEA V er . 1.5, NMEA V er . 2.0 NMEA V er . 2.0 Baud Rate Sets baud rate . 4800, 9600, 19200 (b ps) 4800(bps) Bit Length Sets chara cter length. 8 bit, 7 bit 8 bit Stop Bit Sets number of stop bits. 1 bit, 2 bit 1 bit ...

  • Furuno 1823C - page 63

    3-19 2. Press t he NE X T P A GE s of t key to show Page 2. 3. Selec t I NFRA RE D RE M O T E MO DE, and pr es s t he EDI T so f t k ey . The SELEC T I/R R EM OTE w indow app ears . 4. Point t he remot e cont r ol l er t ow ar d t he di spl ay unit, and press any key on t he r em ot e contr ol l er . Preset mode app ear s i n t he r em ot e c ontro ...

  • Furuno 1823C - page 64

    3-20 This page is intentionally lef t blank. ...

  • Furuno 1823C - page 65

    4-1 4. OPTIONS 4.1 A RP Kit A RP-1 1 Necessary parts Name: ARP kit T ype: ARP-1 1 Code no.: 008-523-050 T able 4-1 ARP-1 1 content s Name T ype Code No. Qty ARP Board 18P9013 008-521-830 1 Pan head screw M3x 6 C2700W 000-881-403 4 SQ9 000-801-850 1 Spacer* SQ15 000-801-779 3 Spring washer* M3 C5191W 000-864-204 3 *Not used 1. Unscrew seven connecte ...

  • Furuno 1823C - page 66

    4-2 3. Disconnect the PH5P connector f rom J1357 on the PO W ER Board (19P1005). 4. Unf asten seven pan head screws (M3x 8) to dism ount the PO W ER Board and POW ER shield case from t he display unit. To J1357 on POWER Board POWER shield case POWER Board 19P1005 Pan head screws (M3x8) 7 pcs. SPU Board ARP Board J1357 P107 J112 Dismounting the POW ...

  • Furuno 1823C - page 67

    4-3 Order of fast ening screws 10. Fast en seven connector nut s. ...

  • Furuno 1823C - page 68

    4-4 4.2 Conne ction of V ideo e quipment / External Monitor/Remote Display The above units can be connect ed to the MODE L1823C/ 1833C/1933 C/1943C/1 953C and GD-1900C by using t he hole at the rear of t he display unit. Rem ove the cover to use t his hole. After connect ing, cover the hole with soft putty to seal. 12:00 Video recorder , CCD camera ...

  • Furuno 1823C - page 69

    4-5 For connection with the CCD cam era/ video recorder , the f ollowing cable is necessary (local supply). • Both side connect or s : RCA connect or (me t al) • Cable leng t h: short er t han 10 m • 2.5C2V or 3C2V (Japan Indust r ial Standard ( JI S), or t he equivalent) coaxial cable (Impedance: 75 Ω ) Conductor S = 0.19 mm ∅ = 0.5 mm 2 ...

  • Furuno 1823C - page 70

    4-6 4. Set two cable tie “legs” (supplied w ith option kit) as shown below . Cable ties attachment. 5. Tie the connector assy w ith two cable ties attached at step 4. 6. Rem ount the POW ER Board and power shield case w ith pan head screws (M3x 8, 5 pcs.) 7. At tach the PH5P connector f rom SPU Board t o J1357 on t he PO W ER Board. 8. Pass t h ...

  • Furuno 1823C - page 71

    4-7 4.2.2 Connecting external monitor Y ou can display the MODEL1823C/1833C/1933C/1943C screen on the external m onit or , wh ich accepts industrial st andard VGA input by using the optional RG B output cable kit OP03-176. Supply m onitor and interconnect ion cable (with HD-15P connectors of m ale, three rows of 15 pins) locally . Necessary par ts ...

  • Furuno 1823C - page 72

    4-8 4. 2 .3 Co nn ecting re mot e di sp lay T he FURUNO Di s pl ay unit FM D-81 1, M O DEL18 32 or GD- 28 0/380, et c. c an be c onn ected to t he Na vNet di spl ay as remote di spl ay . T o int er c onne ct them, use a cabl e at t ached w ith or set as opt i on f or the r em ot e di s pl ay . For the net w ork system cons i st s of some uni t s , ...

  • Furuno 1823C - page 73

    4-9 4.2.4 Attaching more than tw o units W hen m ore t han t wo cables of PIP kit, VG A m onit or cable and rem ot e signal cable, use the cable tie supplied as the installat ion m aterial with the display unit to tie optional cables. Attach the cable t ie t o the hole on the PO W ER Board. Attach the cable tie here. Cable tie Attaching the cable t ...

  • Furuno 1823C - page 74

    4-1 0 4.3 Mountin g the Memory Card Inter face Un it T he memor y card int er f ace CU-200 e nabl es t o us e m or e t w o chart cards . T ype: CU-200 -NA V Code: 0 00-0 81- 567 N ame T ype Code N o. Qty M emor y c ard in ter face CU -200 00 0-08 1-5 69 1 Cable assy M J- A6SPF/TM 1 1AP 8C05 0 000- 14 6-2 89 1 Cable assy M J-A15 A 3 F0003-030 000-14 ...

  • Furuno 1823C - page 75

    4-1 1 De sktop m ount For des ktop m ount , t he opti onal deskt op mo unt ki t F P03-10201 ( Code N o.: 008-5 39- 530) i s requi red. N ame T ype Code N o. Qty M ountin g brac ke t 19-0 23- 3081-0 10 0- 316- 2 50 1 Sel f-t a ppi ng s cr ew 5x2 0 00 0-80 2-081 4 Scr ew M 4x10 00 0-88 1- 145 4 1. Put the m ounti ng bracket 1 9-02 3-30 81 on t he uni ...

  • Furuno 1823C - page 76

    4-12 T his p age i s intent ional ly lef t bl ank. ...

  • Furuno 1823C - page 77

    NAME OUTLINE Q'TY DESCRIPTION/CODE № PACKING L IST 19AM-X-9851 -6 RDP-138/139 [E] 1/1 NAME OUTLINE Q'TY DESCRIPTION/CODE № ユニット UNI T 指示部 DISPLAY UNIT RDP-138-E-N 000-080-037 1 ** リモコンセット REMOTE CONTROLLER SET リモコンキーユニット REMOTE CONTROLLER RMC-100 000-144-471 1 ? ...

  • Furuno 1823C - page 78

    A - 2 ...

  • Furuno 1823C - page 79

    PACK ING LI ST PACK ING LI ST PACK ING LI ST PACK ING LI ST 1 9AO-X-985 1 - 1 RSB-0094-075 RSB-0094-075 RSB-0094-075 RSB-0094-075 N A M E O U T L I N E DESCRIPTION/CODE № Q'TY 1 / 1 ユニット ユニット ユニット ユニット UNIT UNIT UNI ...

  • Furuno 1823C - page 80

    A - 4 ...

  • Furuno 1823C - page 81

    A - 5 ...

  • Furuno 1823C - page 82

    ...

  • Furuno 1823C - page 83

    A - 7 ...

  • Furuno 1823C - page 84

    ...

  • Furuno 1823C - page 85

    PACKING LIST 19AN-X-9851 -1 PSU-005 N A M E O U T L I N E DESCRIPTION/CODE № Q'TY 1/1 ユニット UNIT 空中線電源部 POWER SUPPLY UNIT PSU-005 000-080-190 1 予備品 SPARE PARTS SP03-14001 ヒューズ FUSE FGBO 7A AC125V 000-549-013 3 ヒューズ FUSE FGBO 15A AC125V 000-549-014 3 工事材料 INSTALLAT ...

  • Furuno 1823C - page 86

    Y. Hatai D-1 ...

  • Furuno 1823C - page 87

    Y. Hatai D-2 ...

  • Furuno 1823C - page 88

    Y. Hatai D-3 ...

  • Furuno 1823C - page 89

    Y. Hatai D-3A ...

  • Furuno 1823C - page 90

    Y. Hatai D-4 ...

  • Furuno 1823C - page 91

    Y. Hatai D-5 ...

  • Furuno 1823C - page 92

    Y. Hatai D-6 ...

  • Furuno 1823C - page 93

    Y. Hatai Yoshitosh i Hatai 電子署名者 : Yoshitoshi  Hatai DN: cn=Yoshitoshi  Hatai, o=Furuno, c=JP 日付 : 2003.09.10  09:55:47 +09'00' 署名 は無 効で す D-7 ...

  • Furuno 1823C - page 94

    Y. Hatai Yoshitosh i Hatai 電子署名者 : Yoshitoshi  Hatai DN: cn=Yoshitoshi  Hatai, o=Furuno, c=JP 日付 : 2003.09.10  09:55:47 +09'00' 署名 は無 効で す D-8 ...

  • Furuno 1823C - page 95

    Y. Hatai Yoshitosh i Hatai 電子署名者 : Yoshitoshi  Hatai DN: cn=Yoshitoshi  Hatai, o=Furuno, c=JP 日付 : 2003.09.10  09:55:47 +09'00' 署名 は無 効で す D-9 ...

  • Furuno 1823C - page 96

    FURUNO ELECTRIC CO., LTD. 相互結線図 INTERCONNE CTION DIAG RAM 船舶用レーダー MARINE RADAR MODEL 1833C NAME TYPE 名称 kg DRAWN CHECKED APPROVED DWG.No. SCALE MASS 12 45 6 3 B A D C *1. SHIPYARD SUPPLY NOTE *2. CONNECTOR PLUG FITTED AT FACTORY. *3. SHIELD SHOULD BE EFFECTIVELY GROU NDED AT BOTH UNIT ENDS. 19-022-0006- 3 K.MIYAZAWA TAKA ...

  • Furuno 1823C - page 97

    FURUNO ELECTRIC CO., LTD. NAME TYPE 名称 kg DRAWN CHECKED APPROVED DWG.No. SCALE MASS 12 45 6 3 B A D C NOTE *2. CONNECTOR PLUG FITTED AT FACTORY. *3. SHIELD SHOULD BE EFFECTIVELY GROU NDED AT BOTH UNIT ENDS. MODEL 1823C 船舶用レーダー MARINE RADAR 相互結線図 INTERCONNE CTION DIAG RAM 03-161-6001-1 K.MIYAZAWA TAKAHASHI.T DJ1 *2 P/L A ...

  • Furuno 1823C - page 98

    FURUNO EL ECTRIC CO., LT D. 12 45 6 3 B A D C 相互結線図 INTE RCO NNE CTION DI AG RAM 船舶用レーダー MARI NE RAD AR MODE L 1 933 C/194 3C NAME TYPE 名称 kg DRAWN CHECKED APPROVE D DWG.No. SCALE MASS 19-022-0007- 3 2 1 (+) (-) クロ BLK シロ WHT 3 GND J1351 19S1004,0 .5m OP03-174, MAX.30m 4 3 2 1 5 6 CLK-H CLK-C NC DATA-H /HDG-H DAT ...

  • Furuno 1823C - page 99

    FURUNO EL ECTRIC CO., LT D. 12 45 6 3 B A D C 19S1004,0 .5m 5 4 3 2 1 6 7 +12V SHIELD GND *2 DATA1 J1356 5 4 3 2 1 6 *2 J1355 DATA2 TD2-A TD2-B RD2-A RD2-B NC SHIELD 19S1021, 0.5m シロ クロ ミド キ WHT BLK YEL GRN 4 3 2 1 5 6 CLK-H CLK-C *2 NC DATA- H/HDG-H DATA- C/HDG-C SHIEL D DATA3 J1354 シロ クロ ミド キ WHT BLK YEL GRN RD3-B RD3- ...

  • Furuno 1823C - page 100

    名称 TITLE NAME D A B C 23 1 MASS DRAWN CHECKED APPROVED SCALE DWG.No. kg ±10% 相互結線図 INTERCONNE CTION DIAG RAM GD-1900C カラービデオプロッタ COLOR VIDEO PL OTTER 19-022-0008- 1 C4411-C01- G TAKAHASHI.T K.MIYAZAWA 2 1 (+) (-) クロ BLK シロ WHT 3 *2 MJ-A3SRMD GND J1351 19S1004,0.5m 4 3 2 1 5 6 CLK-H CLK-C *2 NC MJ-A6SRMD ...

Manufacturer Furuno Category Marine GPS System

Documents that we receive from a manufacturer of a Furuno 1823C can be divided into several groups. They are, among others:
- Furuno technical drawings
- 1823C manuals
- Furuno product data sheets
- information booklets
- or energy labels Furuno 1823C
All of them are important, but the most important information from the point of view of use of the device are in the user manual Furuno 1823C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Furuno 1823C, service manual, brief instructions and user manuals Furuno 1823C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Furuno 1823C.

Similar manuals

A complete manual for the device Furuno 1823C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Furuno 1823C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Furuno 1823C.

A complete Furuno manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Furuno 1823C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Furuno 1823C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Furuno 1823C, that we can find in the current document
3. Tips how to use the basic functions of the device Furuno 1823C - which should help us in our first steps of using Furuno 1823C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Furuno 1823C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Furuno 1823C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Furuno 1823C?

Use the form below

If you did not solve your problem by using a manual Furuno 1823C, ask a question using the form below. If a user had a similar problem with Furuno 1823C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)